nubia NX531J Specification

3 Steps to publish Your specification here:

1. Install SpecDevice
2. Run and decode your specs
3. Get your link (read more...)

General
OS details
CPU info
GPU extensions
WiFi kernel messages
build.prop
Modules
Memory map

General Specifications
Manufacturer	nubia
Model	NX531J
Firmware	9; eng.lightv.20190613.190103; SDK28
CPU	4 cores; Qualcomm Technologies, Inc MSM8996; Max: 1593,6 MHz; Min: 307,2 MHz
Display	1920 x 1080; DPI: 480; Evaluated Size: 4,6"
Touch screen	Multitouch 10 points
GPU	Adreno (TM) 530; Qualcomm; OpenGL ES-CM 1.1; OpenGL ES 3.2 V@331.0 (GIT@2df12b3, I07da2d9908) (Date:10/04/18)
RAM	0 MB
Flash	0.500 GB; 64 GB (58.242 GB actual) (see memory map tab)
Communications
Phone	GSM; Net: HSPAP
WiFi
USB Host	No
Bluetooth	Yes
GPS	Yes
Advanced Features
Front camera	Photo: 15.9 MP; Max: 4608x3456; Video: 8.3 MP; Max: 3840x2160; Focus: infinity auto macro continuous-video continuous-picture; Flash modes: off auto on torch
Back camera	Photo: 8.0 MP; Max size: 3264x2448; Video: 5.2 MP; Max: 2688x1944; Focus: fixed; Flash modes: off auto on torch
Sensors	LSM6DS3 Accelerometer -Wakeup Secondary (STMicroelectronics); range: 0...78,453; resolution: 0,002 (0,003%); power: 0,9mA;
	AK09915 Magnetometer -Wakeup Secondary (AKM); range: 0...4912; resolution: 0,15 (0,003%); power: 0,9mA;
	LSM6DS3 Gyroscope -Wakeup Secondary (STMicroelectronics); range: 0...17,453; resolution: 0,001 (0,007%); power: 0,9mA;
	Gravity -Wakeup Secondary (QTI); range: 0...78,453; resolution: 0,002 (0,003%); power: 1,8mA;
	Linear Acceleration -Wakeup Secondary (QTI); range: 0...78,453; resolution: 0,002 (0,003%); power: 1,8mA;
	Rotation Vector -Wakeup Secondary (QTI); range: 0...1; resolution: 0 (0%); power: 1,8mA;
	Light sensor (nubia); range: 0...10000; resolution: 1 (0,01%); power: 0,13mA;
	Proximity sensor (nubia); range: 0...10; resolution: 1 (10%); power: 0,35mA;
Vibrator	Yes
Supported languages	196; Afrikaans; Aghem; Akan; Amharic; Arabic; Assamese; Asu; Asturian; Azerbaijani; Basaa; Belarusian; Bemba; Bena; Bulgarian; Bambara; Bangla; Tibetan; Breton; Bodo; Bosnian; Catalan; Chakma; Chechen; Chiga; Cherokee; Central Kurdish; Czech; Welsh; Danish; Taita; German; Zarma; Lower Sorbian; Duala; Jola-Fonyi; Dzongkha; Embu; Ewe; Greek; English; Esperanto; Spanish; Estonian; Basque; Ewondo; Persian; Fulah; Finnish; Filipino; Faroese; French; Friulian; Western Frisian; Irish; Scottish Gaelic; Galician; Swiss German; Gujarati; Gusii; Manx; Hausa; Hawaiian; Hebrew; Hindi; Croatian; Upper Sorbian; Hungarian; Armenian; Indonesian; Igbo; Sichuan Yi; Icelandic; Italian; Japanese; Ngomba; Machame; Georgian; Kabyle; Kamba; Makonde; Kabuverdianu; Koyra Chiini; Kikuyu; Kazakh; Kako; Kalaallisut; Kalenjin; Khmer; Kannada; Korean; Konkani; Kashmiri; Shambala; Bafia; Colognian; Cornish; Kyrgyz; Langi; Luxembourgish; Ganda; Lakota; Lingala; Lao; Northern Luri; Lithuanian; Luba-Katanga; Luo; Luyia; Latvian; Masai; Meru; Morisyen; Malagasy; Makhuwa-Meetto; Metaʼ; Macedonian; Malayalam; Mongolian; Marathi; Malay; Maltese; Mundang; Burmese; Mazanderani; Nama; Norwegian; North Ndebele; Low German; Nepali; Dutch; Kwasio; Norwegian; Ngiemboon; Nuer; Nyankole; Oromo; Odia; Ossetic; Punjabi; Polish; Pashto; Portuguese; Quechua; Romansh; Rundi; Romanian; Rombo; Russian; Kinyarwanda; Rwa; Sakha; Samburu; Sangu; Northern Sami; Sena; Koyraboro Senni; Sango; Tachelhit; Sinhala; Slovak; Slovenian; Inari Sami; Shona; Somali; Albanian; Serbian; Swedish; Swahili; Tamil; Telugu; Teso; Tajik; Thai; Tigrinya; Tongan; Turkish; Tatar; Tasawaq; Central Atlas Tamazight; Uyghur; Ukrainian; Urdu; Uzbek; Vai; Vietnamese; Vunjo; Walser; Wolof; Soga; Yangben; Yiddish; Yoruba; Cantonese; Standard Moroccan Tamazight; Chinese; Zulu
Battery	Technology: Li-ion; Voltage: 4400
SD Version:	1.1 7

KERNEL: Linux version 3.18.139-perf-g1928f03cf192 (lightvortex@lightvortex-VirtualBox) (gcc version 4.9.x 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Jun 13 19:15:17 IST 2019
CODENAME: REL
Mainboard: msm8996
BRAND: nubia
CPU_ABI: arm64-v8a
CPU_ABI2:
DEVICE: NX531J
DISPLAY: PQ3B.190605.006
FINGERPRINT: google/walleye/walleye:9/PQ3A.190505.001/5373320:user/release-keys
HARDWARE: qcom
ID: PQ3B.190605.006
TAGS: release-keys

processor : 0
BogoMIPS : 38.00
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x51
CPU architecture: 8
CPU variant : 0x1
CPU part : 0x211
CPU revision : 2
processor : 1
BogoMIPS : 38.00
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x51
CPU architecture: 8
CPU variant : 0x1
CPU part : 0x211
CPU revision : 2
processor : 2
BogoMIPS : 38.00
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x51
CPU architecture: 8
CPU variant : 0x1
CPU part : 0x205
CPU revision : 2
processor : 3
BogoMIPS : 38.00
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x51
CPU architecture: 8
CPU variant : 0x1
CPU part : 0x205
CPU revision : 2
Hardware : Qualcomm Technologies, Inc MSM8996

GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_EGL_sync
GL_OES_vertex_half_float
GL_OES_framebuffer_object
GL_OES_rgb8_rgba8
GL_OES_compressed_ETC1_RGB8_texture
GL_AMD_compressed_ATC_texture
GL_KHR_texture_compression_astc_ldr
GL_KHR_texture_compression_astc_hdr
GL_OES_texture_compression_astc
GL_OES_texture_npot
GL_EXT_texture_filter_anisotropic
GL_EXT_texture_format_BGRA8888
GL_OES_texture_3D
GL_EXT_color_buffer_float
GL_EXT_color_buffer_half_float
GL_QCOM_alpha_test
GL_OES_depth24
GL_OES_packed_depth_stencil
GL_OES_depth_texture
GL_OES_depth_texture_cube_map
GL_EXT_sRGB
GL_OES_texture_float
GL_OES_texture_float_linear
GL_OES_texture_half_float
GL_OES_texture_half_float_linear
GL_EXT_texture_type_2_10_10_10_REV
GL_EXT_texture_sRGB_decode
GL_EXT_texture_format_sRGB_override
GL_OES_element_index_uint
GL_EXT_copy_image
GL_EXT_geometry_shader
GL_EXT_tessellation_shader
GL_OES_texture_stencil8
GL_EXT_shader_io_blocks
GL_OES_shader_image_atomic
GL_OES_sample_variables
GL_EXT_texture_border_clamp
GL_EXT_EGL_image_external_wrap_modes
GL_EXT_multisampled_render_to_texture
GL_EXT_multisampled_render_to_texture2
GL_OES_shader_multisample_interpolation
GL_EXT_texture_cube_map_array
GL_EXT_draw_buffers_indexed
GL_EXT_gpu_shader5
GL_EXT_robustness
GL_EXT_texture_buffer
GL_EXT_shader_framebuffer_fetch
GL_ARM_shader_framebuffer_fetch_depth_stencil
GL_OES_texture_storage_multisample_2d_array
GL_OES_sample_shading
GL_OES_get_program_binary
GL_EXT_debug_label
GL_KHR_blend_equation_advanced
GL_KHR_blend_equation_advanced_coherent
GL_QCOM_tiled_rendering
GL_ANDROID_extension_pack_es31a
GL_EXT_primitive_bounding_box
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_EXT_disjoint_timer_query
GL_KHR_debug
GL_EXT_YUV_target
GL_EXT_sRGB_write_control
GL_EXT_texture_norm16
GL_EXT_discard_framebuffer
GL_OES_surfaceless_context
GL_OVR_multiview
GL_OVR_multiview2
GL_EXT_texture_sRGB_R8
GL_KHR_no_error
GL_EXT_debug_marker
GL_OES_EGL_image_external_essl3
GL_OVR_multiview_multisampled_render_to_texture
GL_EXT_buffer_storage
GL_EXT_external_buffer
GL_EXT_blit_framebuffer_params
GL_EXT_clip_cull_distance
GL_EXT_protected_textures
GL_EXT_shader_non_constant_global_initializers
GL_QCOM_texture_foveated
GL_QCOM_shader_framebuffer_fetch_noncoherent
GL_EXT_memory_object
GL_EXT_memory_object_fd
GL_EXT_EGL_image_array
GL_NV_shader_noperspective_interpolation
GL_KHR_robust_buffer_access_behavior
GL_EXT_EGL_image_storage
GL_EXT_blend_func_extended
GL_EXT_clip_control

[52315.182371] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister p2p0
[52315.259099] init: Received control message `start` for `wpa_supplicant` from pid: 644 (/system/bin/wificond)
[52315.259519] init: starting service `wpa_supplicant`...
[52315.266166] init: Created socket `/dev/socket/wpa_wlan0`, mode 660, user 1010, group 1010
[52315.284363] hif_dump_pipe_debug_count pipe_id = 0, recv_bufs_needed = 0, nbuf_alloc_err_count = 0, nbuf_dma_err_count = 0, nbuf_ce_enqueue_err_count = 0hif_dump_pipe_debug_count pipe_id = 1, recv_bufs_needed = 0, nbuf_alloc_err_count = 0, nbuf_dma_err_count = 0, nbuf_ce_enqueue_err_count = 0hif_dump_pipe_debug_count pipe_id = 2, recv_bufs_needed = 0, nbuf_alloc_err_count = 0, nbuf_dma_err_count = 0, nbuf_ce_enqueue_err_count = 0hif_dump_pipe_debug_count pipe_id = 3, recv_bufs_needed = 0, nbuf_alloc_err_count = 0, nbuf_dma_err_count = 0, nbuf_ce_enqueue_err_count = 0hif_dump_pipe_debug_count pipe_id = 4, recv_bufs_needed = 0, nbuf_alloc_err_count = 0, nbuf_dma_err_count = 0, nbuf_ce_enqueue_err_count = 0hif_dump_pipe_debug_count pipe_id = 5, recv_bufs_needed = 0, nbuf_alloc_err_count = 0, nbuf_dma_err_count = 0, nbuf_ce_enqueue_err_count = 0hif_dump_pipe_debug_count pipe_id = 6, recv_bufs_needed = 0, nbuf_alloc_err_count = 0, nbuf_dma_err_count = 0, nbuf_ce_enqueue_err_count = 0hif_dump_pipe_debug_count pipe_id = 7, recv_bufs_needed = 0, nbuf_alloc_err_count = 0, nbuf_dma_err_count = 0, nbuf_ce_enqueue_err_count = 0
[52315.284634] pci_remove
[52315.339701] wlan: driver unloaded
[52315.579075] fwpath_changed_handler : new_mode : sta, present_mode : sta
[52315.579092] kickstart_driver: load: 1 wlan_hdd_inited: 0, mode_change: 0 caller: fwpath_changed_handler
[52315.579121] wlan: loading driver v4.0.11.213X
[52315.666134] ueventd: firmware: loading `evicted30.bin` for `/devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/evicted30.bin`
[52315.668217] ueventd: firmware: could not find firmware for evicted30.bin
[52315.668295] ueventd: loading /devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/evicted30.bin took 2ms
[52315.668914] hif_pci_probe:, con_mode= 0x0
[52315.668923] PCI device id is 003e :003e
[52315.668938] cnss_wlan_pci 0000:01:00.0: BAR 0: assigned [mem 0x0c400000-0x0c5fffff 64bit]
[52315.670914]
[52315.670914] hif_pci_configure : num_desired MSI set to 0
[52315.670938]
[52315.670938] Using PCI Legacy Interrupt
[52315.734836] hif_pci_probe: ramdump base 0xffffff800666c000 size 2097152
[52315.738294] ueventd: firmware: loading `wlan/qca_cld/WCNSS_qcom_cfg.ini` for `/devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/wlan!qca_cld!WCNSS_qcom_cfg.ini`
[52315.738684] ueventd: loading /devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/wlan!qca_cld!WCNSS_qcom_cfg.ini took 0ms
[52315.743812] ipa ipa2_uc_reg_rdyCB:1693 bad parm. inout= (null) NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0
[52315.769606] [ztemt_hw_version]wifi_type=wifi_samsung
[52315.769612] cnss_get_fw_files_for_target: Download SAMSUNG RF bin file successful
[52315.776349] ol_download_firmware: Using 0x1234 for the remainder of init
[52315.776358] ol_transfer_codeswap_struct: failed to get codeswap structure
[52315.781587] ueventd: firmware: loading `otp30.bin` for `/devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/otp30.bin`
[52315.790965] ueventd: loading /devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/otp30.bin took 9ms
[52315.830723] ol_download_firmware: chip_id:0x5030000 board_id:0x0
[52315.837875] ueventd: firmware: loading `bdwlan30.b00` for `/devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/bdwlan30.b00`
[52315.838069] ueventd: firmware: could not find firmware for bdwlan30.b00
[52315.838298] __ol_transfer_bin_file: Failed to get bdwlan30.b00:-11
[52315.838304] __ol_transfer_bin_file: Trying to load default bdwlan30.bin
[52315.840275] ueventd: loading /devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/bdwlan30.b00 took 2ms
[52315.841642] ueventd: firmware: loading `bdwlan30.bin` for `/devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/bdwlan30.bin`
[52315.843817] Board extended Data download address: 0x0
[52315.843973] ueventd: loading /devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/bdwlan30.bin took 2ms
[52315.854549] __ol_transfer_bin_file: no Setup file defined
[52315.858654] ueventd: firmware: loading `qwlan30.bin` for `/devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/qwlan30.bin`
[52315.900934] ueventd: loading /devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/qwlan30.bin took 43ms
[52315.926339] init: processing action (sys.sysctl.tcp_def_init_rwnd=*) from (/init.rc:730)
[52316.138420] SMBCHG: ztemt_chg_work: >>ztemt_chg:>> CHG:vol:4853,pmic_temp:49,chg_status:3,target_cur:1500,weak_charger:0,usbin:1
[52316.138437] dump_chg:eb[1242 0x0] ib[10f2 0x14] eu[1340 0x3] iu[13f2 0xd] mu[13f4 0x19] pt:0 wm:0
[52316.655383] ol_if_dfs_attach: called; ptr=0000000000000000, radar_info=0000000000000000
[52316.655914] +HWT
[52316.667927] -HWT
[52316.668073] is_full_reorder_offloaded? 1
[52316.668184] HTC Service:0x0300 ep:1 TX flow control disabled
[52316.672113] HTT: full reorder offload enabled
[52316.673620] TXRX: page_divider 0x4, offset_filter 0xf num elem 2080, ol desc num page 130, ol desc per page 16
[52316.675890] __wmi_control_rx: WMI UNIFIED SERVICE READY event
[52316.692375] __wmi_control_rx: WMI UNIFIED READY event
[52316.698156] cnss_pci_get_wlan_mac_address: Platform Driver doesn`t have any mac address
[52316.699991] ueventd: firmware: loading `wlan/qca_cld/wlan_mac.bin` for `/devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/wlan!qca_cld!wlan_mac.bin`
[52316.701041] ueventd: loading /devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/wlan!qca_cld!wlan_mac.bin took 1ms
[52316.704805] Pkt log is enabled
[52316.704980] target uses HTT version 3.27; host uses 3.28
[52316.704986] *** Warning: host/target HTT versions are different, though compatible!
[52316.742079] Host SW:4.0.11.213X, FW:4.1.2.38, HW:QCA6174_REV3_2
[52316.743093] ol_pktlog_init: pktlogmod_init successfull
[52316.743303] hif_pci_pm_runtime_init: RUNTIME PM is disabled in ini
[52316.743344] wlan: driver loaded in 1164246
[52316.744465] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[52316.784621] init: Received control message `interface_start` for `android.hardware.wifi.offload@1.0::IOffload/default` from pid: 463 (/system/bin/hwservicemanager)
[52316.784649] init: Could not find service hosting interface android.hardware.wifi.offload@1.0::IOffload/default
[52316.964051] kickstart_driver: load: 0 wlan_hdd_inited: 1, mode_change: 0 caller: wlan_hdd_stop_enter_lowpower
[52316.966967] wlan: unloading driver v4.0.11.213X
[52316.973730] init: Received control message `stop` for `wpa_supplicant` from pid: 644 (/system/bin/wificond)
[52316.973756] init: Sending signal 9 to service `wpa_supplicant` (pid 27739) process group...
[52316.979277] libprocessgroup: Successfully killed process cgroup uid 0 pid 27739 in 5ms
[52316.980519] init: Service `wpa_supplicant` (pid 27739) received signal 9
[52316.989106] Reset Device
[52317.137628] type=1400 audit(1561025596.702:18830): avc: denied { getattr } for pid=27611 comm=4173796E635461736B202331 path="/proc/partitions" dev="proc" ino=4026532496 scontext=u:r:untrusted_app_25:s0:c512,c768 tcontext=u:object_r:proc:s0 tclass=file permissive=1
[52317.137655] type=1400 audit(1561025599.282:18832): avc: denied { open } for pid=27856 comm="etsdk.zteithree" path="/dev/__properties__/u:object_r:serialno_prop:s0" dev="tmpfs" ino=15857 scontext=u:r:system_app:s0 tcontext=u:object_r:serialno_prop:s0 tclass=file permissive=1
[52317.138016] type=1400 audit(1561025599.282:18832): avc: denied { open } for pid=27856 comm="etsdk.zteithree" path="/dev/__properties__/u:object_r:serialno_prop:s0" dev="tmpfs" ino=15857 scontext=u:r:system_app:s0 tcontext=u:object_r:serialno_prop:s0 tclass=file permissive=1
[52317.138032] type=1400 audit(1561025599.282:18833): avc: denied { getattr } for pid=27856 comm="etsdk.zteithree" path="/dev/__properties__/u:object_r:serialno_prop:s0" dev="tmpfs" ino=15857 scontext=u:r:system_app:s0 tcontext=u:object_r:serialno_prop:s0 tclass=file permissive=1
[52317.210695] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister wlan0
[52317.212703] init: Received control message `start` for `wpa_supplicant` from pid: 644 (/system/bin/wificond)
[52317.214426] init: starting service `wpa_supplicant`...
[52317.221026] init: Created socket `/dev/socket/wpa_wlan0`, mode 660, user 1010, group 1010
[52317.240850] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister wlan0
[52317.251889] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister p2p0
[52317.267544] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister p2p0
[52317.285733] type=1400 audit(1561025599.282:18833): avc: denied { getattr } for pid=27856 comm="etsdk.zteithree" path="/dev/__properties__/u:object_r:serialno_prop:s0" dev="tmpfs" ino=15857 scontext=u:r:system_app:s0 tcontext=u:object_r:serialno_prop:s0 tclass=file permissive=1
[52317.285755] type=1400 audit(1561025599.432:18834): avc: denied { execute } for pid=27856 comm="etsdk.zteithree" path="/data/data/com.uei.quicksetsdk.zteithree/files/libqs_jni.so" dev="mmcblk0p47" ino=753727 scontext=u:r:system_app:s0 tcontext=u:object_r:system_app_data_file:s0 tclass=file permissive=1
[52317.317705] hif_dump_pipe_debug_count pipe_id = 0, recv_bufs_needed = 0, nbuf_alloc_err_count = 0, nbuf_dma_err_count = 0, nbuf_ce_enqueue_err_count = 0hif_dump_pipe_debug_count pipe_id = 1, recv_bufs_needed = 0, nbuf_alloc_err_count = 0, nbuf_dma_err_count = 0, nbuf_ce_enqueue_err_count = 0hif_dump_pipe_debug_count pipe_id = 2, recv_bufs_needed = 0, nbuf_alloc_err_count = 0, nbuf_dma_err_count = 0, nbuf_ce_enqueue_err_count = 0hif_dump_pipe_debug_count pipe_id = 3, recv_bufs_needed = 0, nbuf_alloc_err_count = 0, nbuf_dma_err_count = 0, nbuf_ce_enqueue_err_count = 0hif_dump_pipe_debug_count pipe_id = 4, recv_bufs_needed = 0, nbuf_alloc_err_count = 0, nbuf_dma_err_count = 0, nbuf_ce_enqueue_err_count = 0hif_dump_pipe_debug_count pipe_id = 5, recv_bufs_needed = 0, nbuf_alloc_err_count = 0, nbuf_dma_err_count = 0, nbuf_ce_enqueue_err_count = 0hif_dump_pipe_debug_count pipe_id = 6, recv_bufs_needed = 0, nbuf_alloc_err_count = 0, nbuf_dma_err_count = 0, nbuf_ce_enqueue_err_count = 0hif_dump_pipe_debug_count pipe_id = 7, recv_bufs_needed = 0, nbuf_alloc_err_count = 0, nbuf_dma_err_count = 0, nbuf_ce_enqueue_err_count = 0
[52317.317907] pci_remove
[52317.333743] fwpath_changed_handler : new_mode : sta, present_mode : sta
[52317.333760] kickstart_driver: load: 1 wlan_hdd_inited: 1, mode_change: 0 caller: fwpath_changed_handler
[52317.347537] wlan: driver unloaded
[52317.347602] wlan: loading driver v4.0.11.213X
[52317.423215] ueventd: firmware: loading `evicted30.bin` for `/devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/evicted30.bin`
[52317.423449] ueventd: firmware: could not find firmware for evicted30.bin
[52317.423520] ueventd: loading /devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/evicted30.bin took 0ms
[52317.425000] hif_pci_probe:, con_mode= 0x0
[52317.425069] PCI device id is 003e :003e
[52317.425082] cnss_wlan_pci 0000:01:00.0: BAR 0: assigned [mem 0x0c400000-0x0c5fffff 64bit]
[52317.426949]
[52317.426949] hif_pci_configure : num_desired MSI set to 0
[52317.426970]
[52317.426970] Using PCI Legacy Interrupt
[52317.459243] hif_pci_probe: ramdump base 0xffffff800666c000 size 2097152
[52317.460956] ueventd: firmware: loading `wlan/qca_cld/WCNSS_qcom_cfg.ini` for `/devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/wlan!qca_cld!WCNSS_qcom_cfg.ini`
[52317.461616] ueventd: loading /devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/wlan!qca_cld!WCNSS_qcom_cfg.ini took 0ms
[52317.463258] ipa ipa2_uc_reg_rdyCB:1693 bad parm. inout= (null) NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0
[52317.471557] [ztemt_hw_version]wifi_type=wifi_samsung
[52317.471562] cnss_get_fw_files_for_target: Download SAMSUNG RF bin file successful
[52317.473995] ol_download_firmware: Using 0x1234 for the remainder of init
[52317.474000] ol_transfer_codeswap_struct: failed to get codeswap structure
[52317.475163] ueventd: firmware: loading `otp30.bin` for `/devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/otp30.bin`
[52317.475591] ueventd: loading /devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/otp30.bin took 0ms
[52317.514388] ol_download_firmware: chip_id:0x5030000 board_id:0x0
[52317.518975] ueventd: firmware: loading `bdwlan30.b00` for `/devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/bdwlan30.b00`
[52317.519185] ueventd: firmware: could not find firmware for bdwlan30.b00
[52317.519377] __ol_transfer_bin_file: Failed to get bdwlan30.b00:-11
[52317.519382] __ol_transfer_bin_file: Trying to load default bdwlan30.bin
[52317.521264] ueventd: loading /devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/bdwlan30.b00 took 3ms
[52317.521864] ueventd: firmware: loading `bdwlan30.bin` for `/devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/bdwlan30.bin`
[52317.522569] Board extended Data download address: 0x0
[52317.522688] ueventd: loading /devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/bdwlan30.bin took 0ms
[52317.528631] __ol_transfer_bin_file: no Setup file defined
[52317.534791] ueventd: firmware: loading `qwlan30.bin` for `/devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/qwlan30.bin`
[52317.536514] ueventd: loading /devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/qwlan30.bin took 2ms
[52317.629856] type=1400 audit(1561025599.432:18834): avc: denied { execute } for pid=27856 comm="etsdk.zteithree" path="/data/data/com.uei.quicksetsdk.zteithree/files/libqs_jni.so" dev="mmcblk0p47" ino=753727 scontext=u:r:system_app:s0 tcontext=u:object_r:system_app_data_file:s0 tclass=file permissive=1
[52317.629875] type=1400 audit(1561025599.775:18835): avc: denied { read } for pid=27856 comm="etsdk.zteithree" name="ttyHSL1" dev="tmpfs" ino=268 scontext=u:r:system_app:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
[52317.629970] type=1400 audit(1561025599.775:18835): avc: denied { read } for pid=27856 comm="etsdk.zteithree" name="ttyHSL1" dev="tmpfs" ino=268 scontext=u:r:system_app:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
[52317.629978] type=1400 audit(1561025599.775:18836): avc: denied { write } for pid=27856 comm="etsdk.zteithree" name="ttyHSL1" dev="tmpfs" ino=268 scontext=u:r:system_app:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
[52317.630035] audit: audit_lost=4490 audit_rate_limit=5 audit_backlog_limit=64
[52317.630041] audit: rate limit exceeded
[52318.322194] ol_if_dfs_attach: called; ptr=0000000000000000, radar_info=0000000000000000
[52318.322784] +HWT
[52318.334751] -HWT
[52318.334896] is_full_reorder_offloaded? 1
[52318.334999] HTC Service:0x0300 ep:1 TX flow control disabled
[52318.338777] HTT: full reorder offload enabled
[52318.339828] TXRX: page_divider 0x4, offset_filter 0xf num elem 2080, ol desc num page 130, ol desc per page 16
[52318.341859] __wmi_control_rx: WMI UNIFIED SERVICE READY event
[52318.358086] __wmi_control_rx: WMI UNIFIED READY event
[52318.360659] cnss_pci_get_wlan_mac_address: Platform Driver doesn`t have any mac address
[52318.362027] ueventd: firmware: loading `wlan/qca_cld/wlan_mac.bin` for `/devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/wlan!qca_cld!wlan_mac.bin`
[52318.362354] ueventd: loading /devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/wlan!qca_cld!wlan_mac.bin took 0ms
[52318.366038] Pkt log is enabled
[52318.366183] target uses HTT version 3.27; host uses 3.28
[52318.366188] *** Warning: host/target HTT versions are different, though compatible!
[52318.414475] Host SW:4.0.11.213X, FW:4.1.2.38, HW:QCA6174_REV3_2
[52318.415335] ol_pktlog_init: pktlogmod_init successfull
[52318.415913] hif_pci_pm_runtime_init: RUNTIME PM is disabled in ini
[52318.415955] wlan: driver loaded in 1068374
[52318.419955] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[52318.441134] init: Received control message `interface_start` for `android.hardware.wifi.offload@1.0::IOffload/default` from pid: 463 (/system/bin/hwservicemanager)
[52318.441161] init: Could not find service hosting interface android.hardware.wifi.offload@1.0::IOffload/default
[52318.526720] binder: 639:639 transaction failed 29189/-22, size 60-0 line 3015

RAM: 0 MB

Flash: 0.500 GB; 64 GB (58.242 GB actual)

zram0: 0.500 GB
mmcblk0: 58.242 GB

Touch Screen for nubia NX531J

$3.8 Touch Screen Panel for ZTE Nubia Z11 Max/Z11 Mini NX531J NX529J NX523J_V1,Front Glass Panel Cover,Replacement Parts

$27.38 OEM For ZTE Nubia Z11 NX531J LCD Screen with Digitizer Full Assembly(black out of stock)

Replacement Battery for nubia NX531J

Cover Cases for nubia NX531J

$7.99 2017 ZTE Nubia Z11 mini S NX549J 5.2" Universal Flip Wallet Double layer Leather Case for ZTE Nubia Z11 NX531J 5.5" bag cover

Find Similar devices
Same CPU:
Same Display resolution:
Same ro.build.description:

Link: Here I buy Chinese smartphones and tablets