nubia NX531J 规格

一般信息
操作系统的详细信息
CPU信息
图形处理器细节
WiFi内核信息
build.prop
的内核模块
存储器映射

一般规格
生产厂家	nubia
型号	NX531J
Android版	9; eng.lightv.20190613.190103; SDK28
中央处理单元	4 cores; Qualcomm Technologies, Inc MSM8996; Max: 1593,6 MHz; Min: 307,2 MHz
显示	1920 x 1080; DPI: 480; Evaluated Size: 4,6"
触摸屏	Multitouch 10 points
图形处理器	Adreno (TM) 530; Qualcomm; OpenGL ES-CM 1.1; OpenGL ES 3.2 V@331.0 (GIT@2df12b3, I07da2d9908) (Date:10/04/18)
内存RAM	0 MB
快闪记忆体	0.500 GB; 64 GB (58.242 GB actual) (见存储器映射选项卡)
沟通
电话	GSM; Net: HSPAP
WiFi
USB主机	No
蓝牙	Yes
全球定位系统	Yes
高级功能
前置摄像头	Photo: 15.9 MP; Max: 4608x3456; Video: 8.3 MP; Max: 3840x2160; Focus: infinity auto macro continuous-video continuous-picture; Flash modes: off auto on torch
背照相机	Photo: 8.0 MP; Max size: 3264x2448; Video: 5.2 MP; Max: 2688x1944; Focus: fixed; Flash modes: off auto on torch
传感器	LSM6DS3 Accelerometer -Wakeup Secondary (STMicroelectronics); range: 0...78,453; resolution: 0,002 (0,003%); power: 0,9mA;
	AK09915 Magnetometer -Wakeup Secondary (AKM); range: 0...4912; resolution: 0,15 (0,003%); power: 0,9mA;
	LSM6DS3 Gyroscope -Wakeup Secondary (STMicroelectronics); range: 0...17,453; resolution: 0,001 (0,007%); power: 0,9mA;
	Gravity -Wakeup Secondary (QTI); range: 0...78,453; resolution: 0,002 (0,003%); power: 1,8mA;
	Linear Acceleration -Wakeup Secondary (QTI); range: 0...78,453; resolution: 0,002 (0,003%); power: 1,8mA;
	Rotation Vector -Wakeup Secondary (QTI); range: 0...1; resolution: 0 (0%); power: 1,8mA;
	Light sensor (nubia); range: 0...10000; resolution: 1 (0,01%); power: 0,13mA;
	Proximity sensor (nubia); range: 0...10; resolution: 1 (10%); power: 0,35mA;
震动模式	Yes
支持的语言	196; Afrikaans; Aghem; Akan; Amharic; Arabic; Assamese; Asu; Asturian; Azerbaijani; Basaa; Belarusian; Bemba; Bena; Bulgarian; Bambara; Bangla; Tibetan; Breton; Bodo; Bosnian; Catalan; Chakma; Chechen; Chiga; Cherokee; Central Kurdish; Czech; Welsh; Danish; Taita; German; Zarma; Lower Sorbian; Duala; Jola-Fonyi; Dzongkha; Embu; Ewe; Greek; English; Esperanto; Spanish; Estonian; Basque; Ewondo; Persian; Fulah; Finnish; Filipino; Faroese; French; Friulian; Western Frisian; Irish; Scottish Gaelic; Galician; Swiss German; Gujarati; Gusii; Manx; Hausa; Hawaiian; Hebrew; Hindi; Croatian; Upper Sorbian; Hungarian; Armenian; Indonesian; Igbo; Sichuan Yi; Icelandic; Italian; Japanese; Ngomba; Machame; Georgian; Kabyle; Kamba; Makonde; Kabuverdianu; Koyra Chiini; Kikuyu; Kazakh; Kako; Kalaallisut; Kalenjin; Khmer; Kannada; Korean; Konkani; Kashmiri; Shambala; Bafia; Colognian; Cornish; Kyrgyz; Langi; Luxembourgish; Ganda; Lakota; Lingala; Lao; Northern Luri; Lithuanian; Luba-Katanga; Luo; Luyia; Latvian; Masai; Meru; Morisyen; Malagasy; Makhuwa-Meetto; Metaʼ; Macedonian; Malayalam; Mongolian; Marathi; Malay; Maltese; Mundang; Burmese; Mazanderani; Nama; Norwegian; North Ndebele; Low German; Nepali; Dutch; Kwasio; Norwegian; Ngiemboon; Nuer; Nyankole; Oromo; Odia; Ossetic; Punjabi; Polish; Pashto; Portuguese; Quechua; Romansh; Rundi; Romanian; Rombo; Russian; Kinyarwanda; Rwa; Sakha; Samburu; Sangu; Northern Sami; Sena; Koyraboro Senni; Sango; Tachelhit; Sinhala; Slovak; Slovenian; Inari Sami; Shona; Somali; Albanian; Serbian; Swedish; Swahili; Tamil; Telugu; Teso; Tajik; Thai; Tigrinya; Tongan; Turkish; Tatar; Tasawaq; Central Atlas Tamazight; Uyghur; Ukrainian; Urdu; Uzbek; Vai; Vietnamese; Vunjo; Walser; Wolof; Soga; Yangben; Yiddish; Yoruba; Cantonese; Standard Moroccan Tamazight; Chinese; Zulu
电池	Technology: Li-ion; Voltage: 4400
SD Version:	1.1 7

KERNEL: Linux version 3.18.139-perf-g1928f03cf192 (lightvortex@lightvortex-VirtualBox) (gcc version 4.9.x 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Jun 13 19:15:17 IST 2019
CODENAME: REL
Mainboard: msm8996
BRAND: nubia
CPU_ABI: arm64-v8a
CPU_ABI2:
DEVICE: NX531J
DISPLAY: PQ3B.190605.006
FINGERPRINT: google/walleye/walleye:9/PQ3A.190505.001/5373320:user/release-keys
HARDWARE: qcom
ID: PQ3B.190605.006
TAGS: release-keys

processor : 0
BogoMIPS : 38.00
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x51
CPU architecture: 8
CPU variant : 0x1
CPU part : 0x211
CPU revision : 2
processor : 1
BogoMIPS : 38.00
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x51
CPU architecture: 8
CPU variant : 0x1
CPU part : 0x211
CPU revision : 2
processor : 2
BogoMIPS : 38.00
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x51
CPU architecture: 8
CPU variant : 0x1
CPU part : 0x205
CPU revision : 2
processor : 3
BogoMIPS : 38.00
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x51
CPU architecture: 8
CPU variant : 0x1
CPU part : 0x205
CPU revision : 2
Hardware : Qualcomm Technologies, Inc MSM8996

GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_EGL_sync
GL_OES_vertex_half_float
GL_OES_framebuffer_object
GL_OES_rgb8_rgba8
GL_OES_compressed_ETC1_RGB8_texture
GL_AMD_compressed_ATC_texture
GL_KHR_texture_compression_astc_ldr
GL_KHR_texture_compression_astc_hdr
GL_OES_texture_compression_astc
GL_OES_texture_npot
GL_EXT_texture_filter_anisotropic
GL_EXT_texture_format_BGRA8888
GL_OES_texture_3D
GL_EXT_color_buffer_float
GL_EXT_color_buffer_half_float
GL_QCOM_alpha_test
GL_OES_depth24
GL_OES_packed_depth_stencil
GL_OES_depth_texture
GL_OES_depth_texture_cube_map
GL_EXT_sRGB
GL_OES_texture_float
GL_OES_texture_float_linear
GL_OES_texture_half_float
GL_OES_texture_half_float_linear
GL_EXT_texture_type_2_10_10_10_REV
GL_EXT_texture_sRGB_decode
GL_EXT_texture_format_sRGB_override
GL_OES_element_index_uint
GL_EXT_copy_image
GL_EXT_geometry_shader
GL_EXT_tessellation_shader
GL_OES_texture_stencil8
GL_EXT_shader_io_blocks
GL_OES_shader_image_atomic
GL_OES_sample_variables
GL_EXT_texture_border_clamp
GL_EXT_EGL_image_external_wrap_modes
GL_EXT_multisampled_render_to_texture
GL_EXT_multisampled_render_to_texture2
GL_OES_shader_multisample_interpolation
GL_EXT_texture_cube_map_array
GL_EXT_draw_buffers_indexed
GL_EXT_gpu_shader5
GL_EXT_robustness
GL_EXT_texture_buffer
GL_EXT_shader_framebuffer_fetch
GL_ARM_shader_framebuffer_fetch_depth_stencil
GL_OES_texture_storage_multisample_2d_array
GL_OES_sample_shading
GL_OES_get_program_binary
GL_EXT_debug_label
GL_KHR_blend_equation_advanced
GL_KHR_blend_equation_advanced_coherent
GL_QCOM_tiled_rendering
GL_ANDROID_extension_pack_es31a
GL_EXT_primitive_bounding_box
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_EXT_disjoint_timer_query
GL_KHR_debug
GL_EXT_YUV_target
GL_EXT_sRGB_write_control
GL_EXT_texture_norm16
GL_EXT_discard_framebuffer
GL_OES_surfaceless_context
GL_OVR_multiview
GL_OVR_multiview2
GL_EXT_texture_sRGB_R8
GL_KHR_no_error
GL_EXT_debug_marker
GL_OES_EGL_image_external_essl3
GL_OVR_multiview_multisampled_render_to_texture
GL_EXT_buffer_storage
GL_EXT_external_buffer
GL_EXT_blit_framebuffer_params
GL_EXT_clip_cull_distance
GL_EXT_protected_textures
GL_EXT_shader_non_constant_global_initializers
GL_QCOM_texture_foveated
GL_QCOM_shader_framebuffer_fetch_noncoherent
GL_EXT_memory_object
GL_EXT_memory_object_fd
GL_EXT_EGL_image_array
GL_NV_shader_noperspective_interpolation
GL_KHR_robust_buffer_access_behavior
GL_EXT_EGL_image_storage
GL_EXT_blend_func_extended
GL_EXT_clip_control

[52315.182371] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister p2p0
[52315.259099] init: Received control message `start` for `wpa_supplicant` from pid: 644 (/system/bin/wificond)
[52315.259519] init: starting service `wpa_supplicant`...
[52315.266166] init: Created socket `/dev/socket/wpa_wlan0`, mode 660, user 1010, group 1010
[52315.284363] hif_dump_pipe_debug_count pipe_id = 0, recv_bufs_needed = 0, nbuf_alloc_err_count = 0, nbuf_dma_err_count = 0, nbuf_ce_enqueue_err_count = 0hif_dump_pipe_debug_count pipe_id = 1, recv_bufs_needed = 0, nbuf_alloc_err_count = 0, nbuf_dma_err_count = 0, nbuf_ce_enqueue_err_count = 0hif_dump_pipe_debug_count pipe_id = 2, recv_bufs_needed = 0, nbuf_alloc_err_count = 0, nbuf_dma_err_count = 0, nbuf_ce_enqueue_err_count = 0hif_dump_pipe_debug_count pipe_id = 3, recv_bufs_needed = 0, nbuf_alloc_err_count = 0, nbuf_dma_err_count = 0, nbuf_ce_enqueue_err_count = 0hif_dump_pipe_debug_count pipe_id = 4, recv_bufs_needed = 0, nbuf_alloc_err_count = 0, nbuf_dma_err_count = 0, nbuf_ce_enqueue_err_count = 0hif_dump_pipe_debug_count pipe_id = 5, recv_bufs_needed = 0, nbuf_alloc_err_count = 0, nbuf_dma_err_count = 0, nbuf_ce_enqueue_err_count = 0hif_dump_pipe_debug_count pipe_id = 6, recv_bufs_needed = 0, nbuf_alloc_err_count = 0, nbuf_dma_err_count = 0, nbuf_ce_enqueue_err_count = 0hif_dump_pipe_debug_count pipe_id = 7, recv_bufs_needed = 0, nbuf_alloc_err_count = 0, nbuf_dma_err_count = 0, nbuf_ce_enqueue_err_count = 0
[52315.284634] pci_remove
[52315.339701] wlan: driver unloaded
[52315.579075] fwpath_changed_handler : new_mode : sta, present_mode : sta
[52315.579092] kickstart_driver: load: 1 wlan_hdd_inited: 0, mode_change: 0 caller: fwpath_changed_handler
[52315.579121] wlan: loading driver v4.0.11.213X
[52315.666134] ueventd: firmware: loading `evicted30.bin` for `/devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/evicted30.bin`
[52315.668217] ueventd: firmware: could not find firmware for evicted30.bin
[52315.668295] ueventd: loading /devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/evicted30.bin took 2ms
[52315.668914] hif_pci_probe:, con_mode= 0x0
[52315.668923] PCI device id is 003e :003e
[52315.668938] cnss_wlan_pci 0000:01:00.0: BAR 0: assigned [mem 0x0c400000-0x0c5fffff 64bit]
[52315.670914]
[52315.670914] hif_pci_configure : num_desired MSI set to 0
[52315.670938]
[52315.670938] Using PCI Legacy Interrupt
[52315.734836] hif_pci_probe: ramdump base 0xffffff800666c000 size 2097152
[52315.738294] ueventd: firmware: loading `wlan/qca_cld/WCNSS_qcom_cfg.ini` for `/devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/wlan!qca_cld!WCNSS_qcom_cfg.ini`
[52315.738684] ueventd: loading /devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/wlan!qca_cld!WCNSS_qcom_cfg.ini took 0ms
[52315.743812] ipa ipa2_uc_reg_rdyCB:1693 bad parm. inout= (null) NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0
[52315.769606] [ztemt_hw_version]wifi_type=wifi_samsung
[52315.769612] cnss_get_fw_files_for_target: Download SAMSUNG RF bin file successful
[52315.776349] ol_download_firmware: Using 0x1234 for the remainder of init
[52315.776358] ol_transfer_codeswap_struct: failed to get codeswap structure
[52315.781587] ueventd: firmware: loading `otp30.bin` for `/devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/otp30.bin`
[52315.790965] ueventd: loading /devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/otp30.bin took 9ms
[52315.830723] ol_download_firmware: chip_id:0x5030000 board_id:0x0
[52315.837875] ueventd: firmware: loading `bdwlan30.b00` for `/devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/bdwlan30.b00`
[52315.838069] ueventd: firmware: could not find firmware for bdwlan30.b00
[52315.838298] __ol_transfer_bin_file: Failed to get bdwlan30.b00:-11
[52315.838304] __ol_transfer_bin_file: Trying to load default bdwlan30.bin
[52315.840275] ueventd: loading /devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/bdwlan30.b00 took 2ms
[52315.841642] ueventd: firmware: loading `bdwlan30.bin` for `/devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/bdwlan30.bin`
[52315.843817] Board extended Data download address: 0x0
[52315.843973] ueventd: loading /devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/bdwlan30.bin took 2ms
[52315.854549] __ol_transfer_bin_file: no Setup file defined
[52315.858654] ueventd: firmware: loading `qwlan30.bin` for `/devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/qwlan30.bin`
[52315.900934] ueventd: loading /devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/qwlan30.bin took 43ms
[52315.926339] init: processing action (sys.sysctl.tcp_def_init_rwnd=*) from (/init.rc:730)
[52316.138420] SMBCHG: ztemt_chg_work: >>ztemt_chg:>> CHG:vol:4853,pmic_temp:49,chg_status:3,target_cur:1500,weak_charger:0,usbin:1
[52316.138437] dump_chg:eb[1242 0x0] ib[10f2 0x14] eu[1340 0x3] iu[13f2 0xd] mu[13f4 0x19] pt:0 wm:0
[52316.655383] ol_if_dfs_attach: called; ptr=0000000000000000, radar_info=0000000000000000
[52316.655914] +HWT
[52316.667927] -HWT
[52316.668073] is_full_reorder_offloaded? 1
[52316.668184] HTC Service:0x0300 ep:1 TX flow control disabled
[52316.672113] HTT: full reorder offload enabled
[52316.673620] TXRX: page_divider 0x4, offset_filter 0xf num elem 2080, ol desc num page 130, ol desc per page 16
[52316.675890] __wmi_control_rx: WMI UNIFIED SERVICE READY event
[52316.692375] __wmi_control_rx: WMI UNIFIED READY event
[52316.698156] cnss_pci_get_wlan_mac_address: Platform Driver doesn`t have any mac address
[52316.699991] ueventd: firmware: loading `wlan/qca_cld/wlan_mac.bin` for `/devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/wlan!qca_cld!wlan_mac.bin`
[52316.701041] ueventd: loading /devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/wlan!qca_cld!wlan_mac.bin took 1ms
[52316.704805] Pkt log is enabled
[52316.704980] target uses HTT version 3.27; host uses 3.28
[52316.704986] *** Warning: host/target HTT versions are different, though compatible!
[52316.742079] Host SW:4.0.11.213X, FW:4.1.2.38, HW:QCA6174_REV3_2
[52316.743093] ol_pktlog_init: pktlogmod_init successfull
[52316.743303] hif_pci_pm_runtime_init: RUNTIME PM is disabled in ini
[52316.743344] wlan: driver loaded in 1164246
[52316.744465] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[52316.784621] init: Received control message `interface_start` for `android.hardware.wifi.offload@1.0::IOffload/default` from pid: 463 (/system/bin/hwservicemanager)
[52316.784649] init: Could not find service hosting interface android.hardware.wifi.offload@1.0::IOffload/default
[52316.964051] kickstart_driver: load: 0 wlan_hdd_inited: 1, mode_change: 0 caller: wlan_hdd_stop_enter_lowpower
[52316.966967] wlan: unloading driver v4.0.11.213X
[52316.973730] init: Received control message `stop` for `wpa_supplicant` from pid: 644 (/system/bin/wificond)
[52316.973756] init: Sending signal 9 to service `wpa_supplicant` (pid 27739) process group...
[52316.979277] libprocessgroup: Successfully killed process cgroup uid 0 pid 27739 in 5ms
[52316.980519] init: Service `wpa_supplicant` (pid 27739) received signal 9
[52316.989106] Reset Device
[52317.137628] type=1400 audit(1561025596.702:18830): avc: denied { getattr } for pid=27611 comm=4173796E635461736B202331 path="/proc/partitions" dev="proc" ino=4026532496 scontext=u:r:untrusted_app_25:s0:c512,c768 tcontext=u:object_r:proc:s0 tclass=file permissive=1
[52317.137655] type=1400 audit(1561025599.282:18832): avc: denied { open } for pid=27856 comm="etsdk.zteithree" path="/dev/__properties__/u:object_r:serialno_prop:s0" dev="tmpfs" ino=15857 scontext=u:r:system_app:s0 tcontext=u:object_r:serialno_prop:s0 tclass=file permissive=1
[52317.138016] type=1400 audit(1561025599.282:18832): avc: denied { open } for pid=27856 comm="etsdk.zteithree" path="/dev/__properties__/u:object_r:serialno_prop:s0" dev="tmpfs" ino=15857 scontext=u:r:system_app:s0 tcontext=u:object_r:serialno_prop:s0 tclass=file permissive=1
[52317.138032] type=1400 audit(1561025599.282:18833): avc: denied { getattr } for pid=27856 comm="etsdk.zteithree" path="/dev/__properties__/u:object_r:serialno_prop:s0" dev="tmpfs" ino=15857 scontext=u:r:system_app:s0 tcontext=u:object_r:serialno_prop:s0 tclass=file permissive=1
[52317.210695] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister wlan0
[52317.212703] init: Received control message `start` for `wpa_supplicant` from pid: 644 (/system/bin/wificond)
[52317.214426] init: starting service `wpa_supplicant`...
[52317.221026] init: Created socket `/dev/socket/wpa_wlan0`, mode 660, user 1010, group 1010
[52317.240850] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister wlan0
[52317.251889] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister p2p0
[52317.267544] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister p2p0
[52317.285733] type=1400 audit(1561025599.282:18833): avc: denied { getattr } for pid=27856 comm="etsdk.zteithree" path="/dev/__properties__/u:object_r:serialno_prop:s0" dev="tmpfs" ino=15857 scontext=u:r:system_app:s0 tcontext=u:object_r:serialno_prop:s0 tclass=file permissive=1
[52317.285755] type=1400 audit(1561025599.432:18834): avc: denied { execute } for pid=27856 comm="etsdk.zteithree" path="/data/data/com.uei.quicksetsdk.zteithree/files/libqs_jni.so" dev="mmcblk0p47" ino=753727 scontext=u:r:system_app:s0 tcontext=u:object_r:system_app_data_file:s0 tclass=file permissive=1
[52317.317705] hif_dump_pipe_debug_count pipe_id = 0, recv_bufs_needed = 0, nbuf_alloc_err_count = 0, nbuf_dma_err_count = 0, nbuf_ce_enqueue_err_count = 0hif_dump_pipe_debug_count pipe_id = 1, recv_bufs_needed = 0, nbuf_alloc_err_count = 0, nbuf_dma_err_count = 0, nbuf_ce_enqueue_err_count = 0hif_dump_pipe_debug_count pipe_id = 2, recv_bufs_needed = 0, nbuf_alloc_err_count = 0, nbuf_dma_err_count = 0, nbuf_ce_enqueue_err_count = 0hif_dump_pipe_debug_count pipe_id = 3, recv_bufs_needed = 0, nbuf_alloc_err_count = 0, nbuf_dma_err_count = 0, nbuf_ce_enqueue_err_count = 0hif_dump_pipe_debug_count pipe_id = 4, recv_bufs_needed = 0, nbuf_alloc_err_count = 0, nbuf_dma_err_count = 0, nbuf_ce_enqueue_err_count = 0hif_dump_pipe_debug_count pipe_id = 5, recv_bufs_needed = 0, nbuf_alloc_err_count = 0, nbuf_dma_err_count = 0, nbuf_ce_enqueue_err_count = 0hif_dump_pipe_debug_count pipe_id = 6, recv_bufs_needed = 0, nbuf_alloc_err_count = 0, nbuf_dma_err_count = 0, nbuf_ce_enqueue_err_count = 0hif_dump_pipe_debug_count pipe_id = 7, recv_bufs_needed = 0, nbuf_alloc_err_count = 0, nbuf_dma_err_count = 0, nbuf_ce_enqueue_err_count = 0
[52317.317907] pci_remove
[52317.333743] fwpath_changed_handler : new_mode : sta, present_mode : sta
[52317.333760] kickstart_driver: load: 1 wlan_hdd_inited: 1, mode_change: 0 caller: fwpath_changed_handler
[52317.347537] wlan: driver unloaded
[52317.347602] wlan: loading driver v4.0.11.213X
[52317.423215] ueventd: firmware: loading `evicted30.bin` for `/devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/evicted30.bin`
[52317.423449] ueventd: firmware: could not find firmware for evicted30.bin
[52317.423520] ueventd: loading /devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/evicted30.bin took 0ms
[52317.425000] hif_pci_probe:, con_mode= 0x0
[52317.425069] PCI device id is 003e :003e
[52317.425082] cnss_wlan_pci 0000:01:00.0: BAR 0: assigned [mem 0x0c400000-0x0c5fffff 64bit]
[52317.426949]
[52317.426949] hif_pci_configure : num_desired MSI set to 0
[52317.426970]
[52317.426970] Using PCI Legacy Interrupt
[52317.459243] hif_pci_probe: ramdump base 0xffffff800666c000 size 2097152
[52317.460956] ueventd: firmware: loading `wlan/qca_cld/WCNSS_qcom_cfg.ini` for `/devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/wlan!qca_cld!WCNSS_qcom_cfg.ini`
[52317.461616] ueventd: loading /devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/wlan!qca_cld!WCNSS_qcom_cfg.ini took 0ms
[52317.463258] ipa ipa2_uc_reg_rdyCB:1693 bad parm. inout= (null) NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0
[52317.471557] [ztemt_hw_version]wifi_type=wifi_samsung
[52317.471562] cnss_get_fw_files_for_target: Download SAMSUNG RF bin file successful
[52317.473995] ol_download_firmware: Using 0x1234 for the remainder of init
[52317.474000] ol_transfer_codeswap_struct: failed to get codeswap structure
[52317.475163] ueventd: firmware: loading `otp30.bin` for `/devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/otp30.bin`
[52317.475591] ueventd: loading /devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/otp30.bin took 0ms
[52317.514388] ol_download_firmware: chip_id:0x5030000 board_id:0x0
[52317.518975] ueventd: firmware: loading `bdwlan30.b00` for `/devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/bdwlan30.b00`
[52317.519185] ueventd: firmware: could not find firmware for bdwlan30.b00
[52317.519377] __ol_transfer_bin_file: Failed to get bdwlan30.b00:-11
[52317.519382] __ol_transfer_bin_file: Trying to load default bdwlan30.bin
[52317.521264] ueventd: loading /devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/bdwlan30.b00 took 3ms
[52317.521864] ueventd: firmware: loading `bdwlan30.bin` for `/devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/bdwlan30.bin`
[52317.522569] Board extended Data download address: 0x0
[52317.522688] ueventd: loading /devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/bdwlan30.bin took 0ms
[52317.528631] __ol_transfer_bin_file: no Setup file defined
[52317.534791] ueventd: firmware: loading `qwlan30.bin` for `/devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/qwlan30.bin`
[52317.536514] ueventd: loading /devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/qwlan30.bin took 2ms
[52317.629856] type=1400 audit(1561025599.432:18834): avc: denied { execute } for pid=27856 comm="etsdk.zteithree" path="/data/data/com.uei.quicksetsdk.zteithree/files/libqs_jni.so" dev="mmcblk0p47" ino=753727 scontext=u:r:system_app:s0 tcontext=u:object_r:system_app_data_file:s0 tclass=file permissive=1
[52317.629875] type=1400 audit(1561025599.775:18835): avc: denied { read } for pid=27856 comm="etsdk.zteithree" name="ttyHSL1" dev="tmpfs" ino=268 scontext=u:r:system_app:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
[52317.629970] type=1400 audit(1561025599.775:18835): avc: denied { read } for pid=27856 comm="etsdk.zteithree" name="ttyHSL1" dev="tmpfs" ino=268 scontext=u:r:system_app:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
[52317.629978] type=1400 audit(1561025599.775:18836): avc: denied { write } for pid=27856 comm="etsdk.zteithree" name="ttyHSL1" dev="tmpfs" ino=268 scontext=u:r:system_app:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
[52317.630035] audit: audit_lost=4490 audit_rate_limit=5 audit_backlog_limit=64
[52317.630041] audit: rate limit exceeded
[52318.322194] ol_if_dfs_attach: called; ptr=0000000000000000, radar_info=0000000000000000
[52318.322784] +HWT
[52318.334751] -HWT
[52318.334896] is_full_reorder_offloaded? 1
[52318.334999] HTC Service:0x0300 ep:1 TX flow control disabled
[52318.338777] HTT: full reorder offload enabled
[52318.339828] TXRX: page_divider 0x4, offset_filter 0xf num elem 2080, ol desc num page 130, ol desc per page 16
[52318.341859] __wmi_control_rx: WMI UNIFIED SERVICE READY event
[52318.358086] __wmi_control_rx: WMI UNIFIED READY event
[52318.360659] cnss_pci_get_wlan_mac_address: Platform Driver doesn`t have any mac address
[52318.362027] ueventd: firmware: loading `wlan/qca_cld/wlan_mac.bin` for `/devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/wlan!qca_cld!wlan_mac.bin`
[52318.362354] ueventd: loading /devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/wlan!qca_cld!wlan_mac.bin took 0ms
[52318.366038] Pkt log is enabled
[52318.366183] target uses HTT version 3.27; host uses 3.28
[52318.366188] *** Warning: host/target HTT versions are different, though compatible!
[52318.414475] Host SW:4.0.11.213X, FW:4.1.2.38, HW:QCA6174_REV3_2
[52318.415335] ol_pktlog_init: pktlogmod_init successfull
[52318.415913] hif_pci_pm_runtime_init: RUNTIME PM is disabled in ini
[52318.415955] wlan: driver loaded in 1068374
[52318.419955] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[52318.441134] init: Received control message `interface_start` for `android.hardware.wifi.offload@1.0::IOffload/default` from pid: 463 (/system/bin/hwservicemanager)
[52318.441161] init: Could not find service hosting interface android.hardware.wifi.offload@1.0::IOffload/default
[52318.526720] binder: 639:639 transaction failed 29189/-22, size 60-0 line 3015

RAM: 0 MB

Flash: 0.500 GB; 64 GB (58.242 GB actual)

zram0: 0.500 GB
mmcblk0: 58.242 GB

触摸屏为 nubia NX531J

$3.8 Touch Screen Panel for ZTE Nubia Z11 Max/Z11 Mini NX531J NX529J NX523J_V1,Front Glass Panel Cover,Replacement Parts

$27.38 OEM For ZTE Nubia Z11 NX531J LCD Screen with Digitizer Full Assembly(black out of stock)

新电池 nubia NX531J

占地面积 nubia NX531J

$7.99 2017 ZTE Nubia Z11 mini S NX549J 5.2" Universal Flip Wallet Double layer Leather Case for ZTE Nubia Z11 NX531J 5.5" bag cover

Find Similar devices
Same CPU:
Same Display resolution:
Same ro.build.description: