1. Install SpecDevice
2. Run and decode your specs
3. Get your link (read more...)
General Specifications | |
---|---|
Manufacturer | alps |
Model | GOCLEVER TAB M713G |
Firmware | 4.0.4; eng.huxiangyang.1354785551; SDK15 |
CPU | 2 cores; ARMv7 Processor rev 0 (v7l); Max: 1001,0 MHz; Min: 250,2 MHz |
Display | 1024 x 600; DPI: 160; Evaluated Size: 7,4" |
Touch screen | NOT multitouch 1 point |
GPU | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.8@905891 |
RAM | 1024 MB (992 MB available) |
Flash | 4 GB (3.589 GB actual); 16 GB (14.641 GB actual) (see memory map tab) |
Communications | |
Phone | GSM; Net: HSPA |
WiFi | wlan_mt6620; IEEE 802.11 a/b/g/n; MediaTek MT6620; AP Mode |
USB Host | Yes |
Bluetooth | Bluetooth 4.0+HS |
GPS | No |
Advanced Features | |
Front camera | Photo: 1.9 MP; Max: 1600x1200; Focus: infinity; No flash |
Back camera | Photo: 0.3 MP; Max size: 640x480; Focus: infinity; No flash |
Sensors | yamaha530 3-axis Magnetic Field sensor (Aichi Steel); range: 0...600; resolution: 0,002 (0%); power: 0,25mA; |
bma222 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; | |
tmd2771 Proximity Sensor (Capella); range: 0...1; resolution: 1 (100%); power: 0,13mA; | |
tmd2771 Light Sensor (Capella); range: 0...10240; resolution: 1 (0,01%); power: 0,13mA; | |
Vibrator | Yes |
Supported languages | 43; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
Battery | Technology: Li-ion; Voltage: 3889 |
FM radio | 76MHz to 108MHz + Transmitter |
SD Version: | 1.1 5 |
KERNEL: Linux version 3.0.13 (huxiangyang@RD-Server) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Thu Dec 6 17:18:47 HKT 2012
CODENAME: REL
Mainboard: GOCLEVER_TAB_M713G
BRAND: GOCLEVER
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: GOCLEVER_TAB_M713G
DISPLAY: GOCLEVER.V11
FINGERPRINT: alps/hedy77_cu_emmc_ics2/hedy77_cu_emmc_ics2:4.0.4/IMM76D/1354785551:user/test-keys
HARDWARE: mt6577
ID: IMM76D
TAGS: test-keys
Processor : ARMv7 Processor rev 0 (v7l)
processor : 0
BogoMIPS : 1862.86
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc09
CPU revision : 0
Hardware : MT6577
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<6>[ 4583.607299] (0)[wlan] QM: Enter qmFlushRxQueues()
<6>[ 4583.608543] (0)[wlan] QM: Enter qmFlushTxQueues()
<5>[ 4583.608820] (0)[wlan] Number of Stalled Packets = 0
<5>[ 4583.608859] (0)[wlan] unregistering netdev (0xc4a35000)
<6>[ 4583.613164] (0)[RTlog delete] fib_netdev_event() wlan0 NETDEV_DOWN!
<7>[ 4583.620660] (1)[310:CallbackHandler] fork [5397:CallbackHandler]
<7>[ 4583.621059] (1)[5357:Smack Packet Re] sig 13 to [5357:Smack Packet Re]
<7>[ 4583.626883] (0)[5397:CallbackHandler] set proc[5397] name: ->[Thread-345]
<7>[ 4583.629235] (0)[5397:Thread-345] exit
<7>[ 4583.664235] (1)[5357:Smack Packet Re] exit
<7>[ 4583.672833] (0)[5396:dmesg] exit
<7>[ 4583.673521] (0)[5396:dmesg] sig 17 to [5392:AsyncTask #3]
<5>[ 4583.676891] (1)[wlan] unregistration completed
<6>[ 4583.677150] (1)[WMT-DFT][I]hif_sdio_wifi_off:ok!
<7>[ 4583.677225] (1)[5286:ksdioirqd/mmc2] exit
<6>[ 4583.677571] (1)[WMT-DFT][I]hif_sdio_wifi_off:sdio_release_irq() for wifi ok
<4>[ 4583.677620] (1)mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[ 4583.677641] (1)mtk_wcn_cmb_sdio_off (3)
<3>[ 4583.677656] (1)msdc3 -> USR Suspend <- msdc_pm() : L<1666> PID
<6>[ 4583.677760] (1)[WMT-DFT][I]hif_sdio_remove:start!
<6>[ 4583.677865] (0)[WMT-DFT][I]hif_sdio_remove:sdio func(0xc3bce600) is removed successfully!
<6>[ 4583.678152] (0)mmc2: card 0001 removed
<3>[ 4583.679355] (0)msdc3 -> save latch data<1> cmd<1> <- msdc_ops_set_ios() : L<4092> PID
<3>[ 4583.679380] (0)msdc3 -> set mclk to 0 <- msdc_set_mclk() : L<900> PID
<5>[ 4583.679693] (0)[Power/clkmgr] [freq_meter] data = 15494, freq = 196 MHz
<3>[ 4583.679755] (0)[WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC OFF]status(b:2 f:0 g:0 w:0 lpbk:0 coredump:0 wmt:2 sd1:0 sd2:0 stp:0)
<4>[ 4583.679852] (1)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<3>[ 4583.679900] (1)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(4) type(3) ok
<4>[ 4583.680113] (1)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<7>[ 4583.682498] (0)[5394:unloadDriverThr] exit
<5>[ 4583.719801] (0)[Power/Alarm] alarm 2 set 28325.670000000
<7>[ 4583.764596] (0)[5387:Thread-427] exit
<7>[ 4583.776175] (1)[5390:Thread-428] exit
<7>[ 4583.803149] (1)[319:WifiStateMachin] fork [5398:WifiStateMachin]
<7>[ 4583.803226] (0)[5398:WifiStateMachin] set proc[5398] name: ->[loadDriverThrea]
<6>[ 4583.808341] (0)[WLAN] rfkill_set_block(blocked 0)
<6>[ 4583.808353] (0)[WLAN] Power on
<3>[ 4583.808369] (0)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<4>[ 4583.808393] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<4>[ 4583.808442] (0)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<4>[ 4583.808471] (0)mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[ 4583.808480] (0)board_sdio_ctrl force off before on
<6>[ 4583.808488] (0)mtk_wcn_cmb_sdio_off (3)
<5>[ 4583.808606] (0)[Power/clkmgr] [freq_meter] data = 15494, freq = 196 MHz
<5>[ 4583.808707] (0)[Power/clkmgr] [freq_meter] data = 15494, freq = 196 MHz
<6>[ 4583.808725] (0)mtk_wcn_cmb_sdio_on (3)
<5>[ 4583.808837] (0)[Power/clkmgr] [freq_meter] data = 15494, freq = 196 MHz
<3>[ 4583.808855] (0)msdc3 -> USR Resume <- msdc_pm() : L<1691> PID
<3>[ 4583.827010] (0)msdc3 -> ================ <- msdc_set_mclk() : L<948> PID
<3>[ 4583.827031] (0)msdc3 -> !!! Set<400KHz> Source<197000KHz> -> sclk<397KHz> DDR<0> mode<0> div<124> <- msdc_set_mclk() : L<950> PID
<3>[ 4583.827047] (0)msdc3 -> ================ <- msdc_set_mclk() : L<951> PID
<7>[ 4583.837909] (1)[264:er.ServerThread] fork [5399:er.ServerThread]
<7>[ 4583.838451] (1)[5399:er.ServerThread] set proc[5399] name: ->[Thread-347]
<7>[ 4583.840676] (1)[5399:Thread-347] exit
<3>[ 4583.852018] (0)msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1761> PID
<3>[ 4583.873271] (0)msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<4075> PID
<3>[ 4583.873309] (0)msdc3 -> ================ <- msdc_set_mclk() : L<948> PID
<3>[ 4583.873327] (0)msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<950> PID
<3>[ 4583.873343] (0)msdc3 -> ================ <- msdc_set_mclk() : L<951> PID
<6>[ 4583.874343] (0)mmc2: new high speed SDIO card at address 0001
<6>[ 4583.876120] (0)[WMT-DFT][I]hif_sdio_probe:start!
<6>[ 4583.876134] (0)[WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x20a) num(0x1)
<6>[ 4583.876145] (0)[WMT-DFT][I]hif_sdio_probe:card->info[0]: MediaTek MT6620 Wireless Combo Chip
<6>[ 4583.876155] (0)[WMT-DFT][I]hif_sdio_probe:card->info[1]:
<6>[ 4583.876164] (0)[WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[ 4583.876278] (0)[WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(524288)
<7>[ 4583.876316] (0)WQ_WARN: cpu:4, proc:kworker/u:4, [mmc_rescan+0x0/0x2dc]dur: 66550231 > 15ms
<6>[ 4583.966641] (0)[WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[ 4583.966823] (0)[2:kthreadd] fork [5400:kthreadd]
<6>[ 4583.966853] (1)[WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<5>[ 4583.966893] (1)[wlan] net_device prDev(0xc571d000) allocated
<5>[ 4583.968490] (1)[wlan] Open FW image: WIFI_RAM_CODE done
<5>[ 4583.969166] (1)[wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[ 4583.969262] (1)[wlan] Virtual Address = e79c9000 for COMMON MGMT MEMORY POOL.
<5>[ 4583.969277] (1)[wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[ 4583.969306] (1)[wlan] Virtual Address = e79cb000 for SW_RFB_T.
<5>[ 4583.969320] (1)[wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[ 4583.969345] (1)[wlan] Virtual Address = e79cf000 for MSDU_INFO_T.
<6>[ 4583.969361] (1)[wlan] wlanAdapterStart(): Acquiring LP-OWN
<4>[ 4583.969478] (1)[RT_MONITOR]WARNNING [5400:ksdioirqd/mmc2] SET NOT ALLOW RT Prio [1] for proc [5400:ksdioirqd/mmc2]
<6>[ 4583.986752] (0)[wlan] Chip ID: 0x6620
<6>[ 4583.986769] (0)[wlan] Revision ID: 0x1
<4>[ 4584.356633] (0)[hdmi_it66121] hdmi_timer_impl
<4>[ 4584.357116] (0)[hdmi_it66121]HDMITX_DevLoopProc,455 HPDStatus= 0; HPDChangeStatus= 0;
<7>[ 4584.496648] (0)WQ_WARN: cpu:0, proc:kworker/0:2, [thermal_zone_device_check+0x0/0x18]dur: 309995230 > 15ms
<6>[ 4584.643848] (0)[wlan] wlanAdapterStart(): Waiting for Ready bit..
<3>[ 4584.736667] (0)[WMT-DEV][I]wmt_dev_tra_sdio_poll:**poll_during_time = 51210 > 3000, sdio_during_count = 2270 > 200, query
<3>[ 4584.736687] (0)[WMT-DEV][I]wmt_dev_tm_temp_query:sdio traffic , we must query temperature..
<6>[ 4584.876722] (0)[wlan] Ready bit asserted
<5>[ 4584.913935] (0)[wlan] [wifi] wlan%d netif_carrier_off
<6>[ 4584.913966] (0)[wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[ 4584.914035] (0)[wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[ 4584.914187] (0)[wlan] Domain: map=0, idx=0, code=0x0000
<7>[ 4584.914770] (0)[2:kthreadd] fork [5401:kthreadd]
<5>[ 4584.914816] (1)[wlan] tx_thread starts running...
<6>[ 4584.924094] (1)[WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(20a) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[ 4584.924110] (1)[WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[ 4584.924130] (1)[WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:2 f:0 g:0 w:2 lpbk:0 coredump:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[ 4584.924195] (1)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<3>[ 4584.924228] (1)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<4>[ 4584.924606] (0)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<4>[ 4584.924639] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<4>[ 4584.924986] (0)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<7>[ 4584.925928] (0)[5398:loadDriverThrea] exit
<4>[ 4584.925992] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<4>[ 4584.926023] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<4>[ 4584.926061] (0)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<4>[ 4584.928063] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<4>[ 4584.928094] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<4>[ 4584.928122] (0)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<4>[ 4584.929169] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<4>[ 4584.929195] (0)[STP-PSM] [I]_stp_psm_put_op: opId(0) enqueue
<3>[ 4584.929210] (0)[WMT-DEV][I]wmt_dev_tm_temp_query:[Thermal] current_temp = 33
<7>[ 4584.929248] (0)WQ_WARN: cpu:0, proc:kworker/0:2, [thermal_zone_device_check+0x0/0x18]dur: 192590615 > 15ms
<4>[ 4584.929271] (0)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<3>[ 4584.930374] (1)[WMT-CORE][I]opfunc_pwr_sv:**** Send sleep command
<3>[ 4584.930634] (1)[WMT-CORE][I]opfunc_pwr_sv:Send sleep command OK!
<3>[ 4584.930649] (1)[WMT-CORE][I]opfunc_pwr_sv:Do STP-CB! 0 bf132578
<6>[ 4584.930696] (1)src = COMBO_IF_UART, to enter deep idle? 1
<6>[ 4584.937091] (1)[RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[ 4584.937138] (1)ADDRCONF(NETDEV_UP): wlan0: link is not ready
<5>[ 4584.939538] (1)init: starting `wpa_supplicant`
<7>[ 4584.939967] (1)[1:init] fork [5402:init]
<7>[ 4584.940956] (0)[5402:init] set proc[5402] name: ->[logwrapper]
<7>[ 4584.941451] (1)[319:WifiStateMachin] fork [5403:WifiStateMachin]
<7>[ 4584.941536] (1)[5403:WifiStateMachin] set proc[5403] name: ->[WifiMonitor]
<7>[ 4584.944155] (0)[5402:logwrapper] fork [5404:logwrapper]
<7>[ 4584.944761] (0)[5404:logwrapper] set proc[5404] name: ->[wpa_supplicant]
<7>[ 4585.042651] (0)[5356:Smack Packet Wr] exit
<5>[ 4585.077175] (0)[wlan] N=0 closed
<5>[ 4585.077204] (0)[wlan] EVENT-ROAMING ABORT: Current Time = 3006810
<5>[ 4585.077220] (0)[wlan] [13] TRANSITION: [0] -> [0]
<6>[ 4585.077495] (0)[wlan] NAF=0,0,0
<6>[ 4585.078239] (1)[wlan] NAF=0,0,0
<4>[ 4585.356659] (0)[hdmi_it66121] hdmi_timer_impl
<4>[ 4585.357171] (0)[hdmi_it66121]HDMITX_DevLoopProc,455 HPDStatus= 0; HPDChangeStatus= 0;
<5>[ 4585.358159] (0)[wlan] [13] TRANSITION: [0] -> [2]
<5>[ 4585.805040] (1)[wlan] [13] TRANSITION: [2] -> [0]
<7>[ 4585.806987] (0)WQ_WARN: cpu:0, proc:kworker/0:2, [thermal_zone_device_check+0x0/0x18]dur: 310340385 > 15ms
<6>[ 4585.807543] (1)[wlan] NAF=0,0,0
<5>[ 4585.808721] (1)[wlan] N=0 closed
<5>[ 4585.808748] (1)[wlan] EVENT-ROAMING ABORT: Current Time = 3007540
<5>[ 4585.808764] (1)[wlan] [13] TRANSITION: [0] -> [0]
<5>[ 4585.808781] (1)[wlan] [13] TRANSITION: [0] -> [1]
<5>[ 4585.808806] (1)[wlan] [13] TRANSITION: [1] -> [6]
<5>[ 4585.808825] (1)[wlan] ChReq net=0 token=1 b=1 c=2 s=0
<6>[ 4585.814145] (1)[wlan] NAF=0,0,0
<5>[ 4585.814174] (1)[wlan] ChGrant net=0 token=1 ch=2 sco=0
<5>[ 4585.814240] (1)[wlan] [13] TRANSITION: [6] -> [7]
<5>[ 4585.814284] (1)[wlan] STA 40mAllowed=0
<6>[ 4585.814392] (1)[wlan] Wait Cmd TxSeqNum:1
<6>[ 4585.822409] (1)[wlan] EVENT_ID_TX_DONE PacketSeq:1 ucStatus: 0 SN: 26
<6>[ 4585.826128] (1)[wlan] Wait Cmd TxSeqNum:2
<6>[ 4585.828899] (1)[wlan] QM: (fgIsWmmSupported=0, fgSupportQoS=1)
<5>[ 4585.828921] (1)[wlan] N=0 b=1 c=2 s=0 e=0 h=0 I=0x00 l=1 p=0
<5>[ 4585.828946] (1)[wlan]
<4>[ 4585.828957] (1)c8:64:c7:4d:a2:ac [17] TRANSITION: [0] -> [3]
<4>[ 4585.828962] (1)
<5>[ 4585.829002] (1)[wlan] [wifi] wlan0 netif_carrier_on [ssid:avtoma c8:64:c7:4d:a2:ac]
<5>[ 4585.829022] (1)[wlan] EVENT-ROAMING START: Current Time = 3007560
<5>[ 4585.829038] (1)[wlan] [27] TRANSITION: [0] -> [1]
<5>[ 4585.829052] (1)[wlan] [13] TRANSITION: [7] -> [10]
<6>[ 4585.829347] (1)ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<5>[ 4585.831184] (1)[wlan] QM: +STA[0]
<6>[ 4585.844081] (1)[wlan] EVENT_ID_TX_DONE PacketSeq:2 ucStatus: 0 SN: 27
<7>[ 4585.862726] (1)[5392:AsyncTask #3] fork [5405:AsyncTask #3]
<5>[ 4585.865693] (1)[wlan] N=0 b=1 c=2 s=0 e=0 h=0 I=0x00 l=1 p=0
<7>[ 4585.871972] (0)[5405:AsyncTask #3] set proc[5405] name: ->[dmesg]
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IMM76D
ro.build.display.id=GOCLEVER.V11
ro.build.version.incremental=eng.huxiangyang.1354785551
ro.custom.build.version=1354785551
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=Thu Dec 6 17:22:02 HKT 2012
ro.build.date.utc=1354785722
ro.build.type=user
ro.build.user=huxiangyang
ro.build.host=RD-Server
ro.build.tags=test-keys
ro.product.model=GOCLEVER TAB M713G
ro.product.brand=GOCLEVER
ro.product.name=GOCLEVER_TAB_M713G
ro.product.device=GOCLEVER_TAB_M713G
ro.product.board=GOCLEVER_TAB_M713G
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=alps
ro.product.locale.language=pl
ro.product.locale.region=PL
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=GOCLEVER_TAB_M713G
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=hedy77_cu_emmc_ics2-user 4.0.4 IMM76D eng.huxiangyang.1354785551 test-keys
ro.build.fingerprint=alps/hedy77_cu_emmc_ics2/hedy77_cu_emmc_ics2:4.0.4/IMM76D/1354785551:user/test-keys
ro.build.flavor=
ro.build.characteristics=tablet
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=GOCLEVER.V11
ro.mediatek.platform=MT6577
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=GOCLEVER
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=128m
# Encrypt phone function
ro.crypto.tmpfs_options=mode=0771,uid=1000,gid=1000
ro.crypto.fs_type=ext4
ro.crypto.fs_real_blkdev=/emmc@usrdata
ro.crypto.fs_mnt_point=/data
ro.crypto.fs_options=noauto_da_alloc
ro.crypto.fs_flags=0x00000406
# USB MTP WHQL
ro.sys.usb.mtp.whql.enable=0
# Power off opt in IPO
sys.ipo.pwrdncap=2
ro.sys.usb.storage.type=mtp,mass_storage
#
# ADDITIONAL_BUILD_PROPERTIES
#
fmradio.driver.chip=1
ro.sf.hwrotation=270
ril.current.share_modem=1
launcherplus.allappsgrid=2d
launcher2.allappsgrid=3d_20
curlockscreen=2
ro.mediatek.gemini_support=false
persist.radio.fd.counter=20
persist.radio.fd.off.counter=20
drm.service.enabled=true
fmradio.driver.enable=1
mediatek.wlan.chip=MT6620
mediatek.wlan.module.postfix=
dalvik.vm.mtk-stack-trace-file=/data/anr/mtk_traces.txt
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.config.ringtone=Backroad.ogg
persist.sys.timezone=GMT+01:00
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
wlan_mt6620 286292 0 - Live 0xbf202000 (P)
cfg80211 121776 0 - Live 0xbf1d9000
mtk_fm_priv 8917 0 - Live 0xbf1d3000 (P)
mt6620_fm_drv 111893 1 mtk_fm_priv, Live 0xbf1ab000
mtk_stp_bt 39986 1 - Live 0xbf19e000
mtk_stp_gps 37294 0 - Live 0xbf191000
mtk_stp_uart 21593 1 - Live 0xbf188000 (P)
mtk_stp_wmt 376012 7 wlan_mt6620,mtk_fm_priv,mt6620_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf11e000 (P)
mtk_hif_sdio 18769 2 wlan_mt6620,mtk_stp_wmt, Live 0xbf115000
devinfo 840 0 - Live 0xbf111000 (P)
devapc 4553 0 - Live 0xbf10c000 (P)
sec 90369 0 - Live 0xbf0ef000 (P)
vcodec_kernel_driver 28254 0 - Live 0xbf0e3000 (P)
m4u 113427 34 - Live 0xbf0be000 (P)
ccmni 17134 0 - Live 0xbf0b5000 (P)
ccci 116391 15 ccmni, Live 0xbf08d000 (P)
ccci_plat 127262 2 ccmni,ccci, Live 0xbf064000 (P)
mtk_drvb_77 6081 0 - Live 0xbf05f000 (P)
mtklfb 23570 0 - Live 0xbf055000
pvrsrvkm 233127 143 mtklfb, Live 0xbf00e000
mtk_hwe 1394 0 - Live 0xbf00a000 (P)
aed 16388 3 - Live 0xbf000000 (P)
RAM: 1024 MB (992 MB available)
System RAM: 992.000MB
mtkfb.0: 10.000MB
Flash: 4 GB (3.589 GB actual); 16 GB (14.641 GB actual)
mmcblk0: 3.589 GB
mmcblk1: 14.641 GB
Touch Screen for alps GOCLEVER TAB M713G
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$24.72 50pcs/lot Original for ALPS 3D Analog Joystick Button for Xboxone for Xbox One Controller Gamd Pad
$5.06 XBox One Elite Series 2 Controller 3D Analog Joystick ALPS original part 2PCS
$28 10PCS ALPS Original 3D Anolog For PS5 Joystick 3D Rocker Replacement For PlayStation 5 Controller Grip stick Sensor Module
$0.25 Outemu otm gaote alps switch Clicky 30g Linear 60g like alps switches Matias switch for mechanical keyboards
$31.96 4PCs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$17.06 50PCS Replacement 3D Analog Joystick Analogue Thumbstick For PS2 XBOX 360 ALPS Controller
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$2.39 2pcs/lot ALPS Original OEM 3D Joystick for PS4 PS5 Controller Repair parts 3D analog stick for Xbox one
$20.18 50PCS ALPS Original 3D Joystick for Xbox one Controller Repair Parts 3D Analog Sensor Module Joystick for Xbox one S / X
$190.79 50pcs Original 3D Analog Joystick for Playstation 5 PS5 with ALPS 2.3k Thumbstick Sensor Module
$40.21 4pcs Original Replacement Alps F logo Analog Joystick 3D Thumb stick Axis Sensor Assembly Module Rocker For Xbox 360,PS3,PS2
$2.75 Original ALPS Mouse Encoder 11mm High Accurate ALPS 9mm for RAW G403 g603 g703 Solve the roller wheel problem Accessoires 2PCS
$9.36 20PCS ALPS Original 3D Joystick for Xbox one Controller Repair parts 3D analog stick for Xbox one s x series S X
$26.38 60pcs/tray for Xbox One/ Series ALPS Original 3D Joystick for PS4 PS5 Controller 3D Analog Stick Sensor Module Thumb Stick
$100.68 20pcs ALPS Hall Stick Potentiometer Replacement Trim Pot Resistor Thumbstick Module Sensor For PS5 Playstation 5 Joystick Repair
$23.92 2pcs ALPS Hall Stick Potentiometer Replacement Trim Pot Resistor Thumbstick Module Sensor For PS5 PS4 Xbox Nintendo Switch Pro
$4.12 50PCS For ALPS Joystick Potentiometers Sensor Module For PS5 Controllers 2K3Ω 3D Thumbstick Axis Resistors Repair Part
$60.97 10pcs ALPS Hall Stick Potentiometer Replacement Trim Pot Resistor Thumbstick Module Sensor For PS5 PS4 Xbox Nintendo Switch Pro
Replacement Battery for alps GOCLEVER TAB M713G
$0.25 Outemu otm gaote alps switch Clicky 30g Linear 60g like alps switches Matias switch for mechanical keyboards
$28 10PCS ALPS Original 3D Anolog For PS5 Joystick 3D Rocker Replacement For PlayStation 5 Controller Grip stick Sensor Module
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$24.72 50pcs/lot Original for ALPS 3D Analog Joystick Button for Xboxone for Xbox One Controller Gamd Pad
$5.06 XBox One Elite Series 2 Controller 3D Analog Joystick ALPS original part 2PCS
$31.96 4PCs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$20.18 50PCS ALPS Original 3D Joystick for Xbox one Controller Repair Parts 3D Analog Sensor Module Joystick for Xbox one S / X
$2.39 2pcs/lot ALPS Original OEM 3D Joystick for PS4 PS5 Controller Repair parts 3D analog stick for Xbox one
$17.06 50PCS Replacement 3D Analog Joystick Analogue Thumbstick For PS2 XBOX 360 ALPS Controller
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$40.21 4pcs Original Replacement Alps F logo Analog Joystick 3D Thumb stick Axis Sensor Assembly Module Rocker For Xbox 360,PS3,PS2
$190.79 50pcs Original 3D Analog Joystick for Playstation 5 PS5 with ALPS 2.3k Thumbstick Sensor Module
$2.75 Original ALPS Mouse Encoder 11mm High Accurate ALPS 9mm for RAW G403 g603 g703 Solve the roller wheel problem Accessoires 2PCS
$9.36 20PCS ALPS Original 3D Joystick for Xbox one Controller Repair parts 3D analog stick for Xbox one s x series S X
$26.38 60pcs/tray for Xbox One/ Series ALPS Original 3D Joystick for PS4 PS5 Controller 3D Analog Stick Sensor Module Thumb Stick
$100.68 20pcs ALPS Hall Stick Potentiometer Replacement Trim Pot Resistor Thumbstick Module Sensor For PS5 Playstation 5 Joystick Repair
$4.12 50PCS For ALPS Joystick Potentiometers Sensor Module For PS5 Controllers 2K3Ω 3D Thumbstick Axis Resistors Repair Part
$60.97 10pcs ALPS Hall Stick Potentiometer Replacement Trim Pot Resistor Thumbstick Module Sensor For PS5 PS4 Xbox Nintendo Switch Pro
$23.92 2pcs ALPS Hall Stick Potentiometer Replacement Trim Pot Resistor Thumbstick Module Sensor For PS5 PS4 Xbox Nintendo Switch Pro
Cover Cases for alps GOCLEVER TAB M713G
$28 10PCS ALPS Original 3D Anolog For PS5 Joystick 3D Rocker Replacement For PlayStation 5 Controller Grip stick Sensor Module
$24.72 50pcs/lot Original for ALPS 3D Analog Joystick Button for Xboxone for Xbox One Controller Gamd Pad
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$0.25 Outemu otm gaote alps switch Clicky 30g Linear 60g like alps switches Matias switch for mechanical keyboards
$5.06 XBox One Elite Series 2 Controller 3D Analog Joystick ALPS original part 2PCS
$31.96 4PCs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$2.39 2pcs/lot ALPS Original OEM 3D Joystick for PS4 PS5 Controller Repair parts 3D analog stick for Xbox one
$20.18 50PCS ALPS Original 3D Joystick for Xbox one Controller Repair Parts 3D Analog Sensor Module Joystick for Xbox one S / X
$17.06 50PCS Replacement 3D Analog Joystick Analogue Thumbstick For PS2 XBOX 360 ALPS Controller
$40.21 4pcs Original Replacement Alps F logo Analog Joystick 3D Thumb stick Axis Sensor Assembly Module Rocker For Xbox 360,PS3,PS2
$190.79 50pcs Original 3D Analog Joystick for Playstation 5 PS5 with ALPS 2.3k Thumbstick Sensor Module
$2.75 Original ALPS Mouse Encoder 11mm High Accurate ALPS 9mm for RAW G403 g603 g703 Solve the roller wheel problem Accessoires 2PCS
$9.36 20PCS ALPS Original 3D Joystick for Xbox one Controller Repair parts 3D analog stick for Xbox one s x series S X
$26.38 60pcs/tray for Xbox One/ Series ALPS Original 3D Joystick for PS4 PS5 Controller 3D Analog Stick Sensor Module Thumb Stick
$100.68 20pcs ALPS Hall Stick Potentiometer Replacement Trim Pot Resistor Thumbstick Module Sensor For PS5 Playstation 5 Joystick Repair
$4.12 50PCS For ALPS Joystick Potentiometers Sensor Module For PS5 Controllers 2K3Ω 3D Thumbstick Axis Resistors Repair Part
$23.92 2pcs ALPS Hall Stick Potentiometer Replacement Trim Pot Resistor Thumbstick Module Sensor For PS5 PS4 Xbox Nintendo Switch Pro
$60.97 10pcs ALPS Hall Stick Potentiometer Replacement Trim Pot Resistor Thumbstick Module Sensor For PS5 PS4 Xbox Nintendo Switch Pro
Find Similar devices | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |