- General
- Detalles OS
- CPU info
- GPU extensiones
- Mensajes del kernel WiFi
- build.prop
- Módulos
- Mapa de la memoria
Especificaciones generales | |
---|---|
Marca | alps |
Modelo | DW-E20 |
Versión de Android | 4.0.4; 166; SDK10 |
CPU | 2 cores; Dual-Core ARMv7 Processor rev 10 (v7l) |
Pantalla | 854 x 480; DPI: 240; Evaluated Size: 4.1" |
Pantalla táctil | Multitouch 2 points |
GPU | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.7@276259 |
RAM | 230 MB |
Flash | 4 GB (3.671 GB actual); 0.5 GB (0.472 GB actual) (ver pestaña de mapa de memoria) |
Comunicaciones | |
Teléfono | GSM, Dual SIM; Net: EDGE |
WiFi | lca_core; IEEE 802.11 b/g/n; MediaTek MT6628; AP Mode |
USB Host | No |
Bluetooth | Bluetooth 3.0+HS, 4.0 |
GPS | Yes |
Funciones avanzadas | |
Cámara frontal | Photo: 4.9 MP; Max: 2560x1920; Focus: infinity; No flash |
Cámara trasera | Photo: 0.3 MP; Max size: 640x480; Focus: infinity; No flash |
Sensores | MT6516 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0.004 (0.012%); power: 0.13mA; |
tmd2771 Proximity Sensor (Anvago); range: 0...1; resolution: 1 (100%); power: 0.13mA; | |
TMD2771 Light Sensor (Anvago); range: 0...10240; resolution: 1 (0.01%); power: 0.13mA; | |
Gravity Sensor (Google Inc.); range: 0...32; resolution: 0.004 (0.012%); power: 0.13mA; | |
Linear Acceleration Sensor (Google Inc.); range: 0...32; resolution: 0.004 (0.012%); power: 0.13mA; | |
Rotation Vector Sensor (Google Inc.); range: 0...1; resolution: 0 (0%); power: 0.13mA; | |
Alarma vibrante | Yes |
Idiomas soportados | 41; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Portuguese; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
Batería | Technology: Li-ion; Voltage: 3916 |
FM radio | Supported by chipset |
SD Version: | 1.1 5 |
KERNEL: Linux version 3.0.13 (jenkins@scm-builder2) (gcc version 4.4.3 (GCC) ) #1 PREEMPT Tue Jan 15 21:27:39 CST 2013
CODENAME: REL
Mainboard: DW-E20
BRAND: DW-E20
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: DW-E20
DISPLAY: Z1268_A008_DW-E20_L002
FINGERPRINT: DW-E20/z1268/z1268:4.0.4/GRK39F/:user/test-keys
HARDWARE: mt6575
ID: GRK39F
TAGS: test-keys
Processor : Dual-Core ARMv7 Processor rev 10 (v7l)
BogoMIPS : 1998.84
Features : swp half thumb fastmult vfp edsp thumbee Core Dual
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc09
CPU revision : 10
Hardware : MT6517
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_stream2
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<7>[21081.788718] [8670:dmesg] exit
<7>[21081.788904] [8670:dmesg] sig 17 to [8667:AsyncTask #1]
<6>[21081.825309] [WLAN] rfkill_set_block(blocked 0)
<6>[21081.825320] [WLAN] Power on
<3>[21081.825335] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[21081.825353] [STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[21081.825522] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[21081.825537] [WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(not defined)
<3>[21081.825546] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO122)
<3>[21081.825555] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(not defined)
<3>[21081.825564] [WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[21081.825573] [WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO68)
<3>[21081.825582] [WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(11)
<3>[21081.825591] [WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO66)
<3>[21081.825600] [WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(10)
<3>[21081.825609] [WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<3>[21081.825618] [WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[21081.825627] [WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[21081.825636] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[21081.825645] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[21081.825654] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[21081.825663] [WMT-PLAT][I]wmt_plat_dump_pin_conf:FM digital mode is not set, no need for I2S GPIOs
<3>[21081.825674] [WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(not defined)
<3>[21081.825682] [WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(not defined)
<3>[21081.825692] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[21081.825703] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<3>[21081.825715] [WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:ALL EINT not defined
<3>[21081.825726] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[21081.825740] [WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[21081.825751] [WMT-PLAT][W]wmt_plat_gps_lna_ctrl:host gps lna pin not defined!!!
<3>[21081.825761] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[21082.026926] [WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[21082.026948] [WMT-PLAT][I]wmt_plat_i2s_ctrl:[MT662x]warnning:FM digital mode is not set, no I2S GPIO settings should be modified by combo driver
<3>[21082.026962] [WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<4>[21082.027147] [STP-PSM] [E]_stp_psm_notify_stp(1174):ERROR! Invalid Action!!
<4>[21082.027153]
<3>[21082.027178] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[21082.027190] [WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[21082.027200] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<4>[21082.027823] mt6575_get_bus_freq() return 192400
<3>[21082.028029] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[21082.028040] Flush type = 4 Rx Queue
<3>[21082.028192] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[21082.028208] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[21082.028221] [STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[21082.028229] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[21082.028240] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<6>[21082.028256] [STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[21082.028266] [STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[21082.028277] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[21082.028288] [STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[21082.034766] [WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6628)
<3>[21082.040400] [WMT-IC][I]mt6628_ver_check:MT6628: read hw_ver (hw version) (0x8a10)
<3>[21082.046010] [WMT-IC][I]mt6628_ver_check:MT6628: read fw_ver (rom version) (0x8a10)
<3>[21082.046025] [WMT-IC][I]mt6628_find_wmt_ic_info:found ic info(0x8a10) by full match! index:1
<3>[21082.046040] [WMT-IC][I]mt6628_ver_check:MT6628: wmt ic info: MT6628.E2 (0x8a10, WMTHWVER:1, patch_ext:_e2)
<3>[21082.046054] [WMT-CORE][I]wmt_core_hw_check:chip id(0x6628) ver_check ok
<3>[21082.057048] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[21082.057064] [WMT-IC][I]mt6628_sw_init:WMT-CORE: change baudrate(4000000) ok
<3>[21082.062270] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(srh_patch) result(0)
<3>[21082.062289] [WMT-IC][I]mt6628_patch_dwn:valid patch found: (/system/etc/firmware//mt6628_patch_e2_hdr.bin)
<3>[21082.063620] [WMT-IC][I]mt6628_patch_dwn:===========================================
<3>[21082.063636] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Built Time = 20121011154301a
<3>[21082.063647] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[21082.063657] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[21082.063667] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Ph Ver = 0x0010
<3>[21082.063676] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Platform = 1150
<3>[21082.063685] [WMT-IC][I]mt6628_patch_dwn:===========================================
<3>[21082.213675] [WMT-IC][I]mt6628_patch_dwn:wmt_core: patch dwn:0 frag(22, 884) ok
<3>[21082.214208] [WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf08047c)
<3>[21082.215204] [WMT-IC][I]mt6628_sw_init:init_coex ok
<6>[21082.215997] [STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[21082.216012] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[21082.216025] [STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[21082.216035] [WMT-IC][I]mt6628_sw_init:enable host STP-UART-FULL mode
<3>[21082.230352] [WMT-IC][I]mt6628_sw_init:co-clock enabled.
<3>[21082.233332] [WMT-DEV][E]wmt_dev_rx_timeout(761):gRxCount != 0 (1), reset it!
<3>[21082.233347] [WMT-CTRL][W]wmt_ctrl_rx:wmt_ctrl_rx be signaled, but no rx data(200)
<3>[21082.234039] [WMT-IC][I]mt6628_sw_init:set fm mode (2) ok
<3>[21082.234050] [WMT-IC][I]mt6628_sw_init:disable mt662x firmware coredump
<6>[21082.234062] [STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[21082.234075] [STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[21082.234088] mt_combo_sdio_ctrl: force set sdio port to (2)
<6>[21082.234095] board_sdio_ctrl force off before on
<6>[21082.234102] mtk_wcn_cmb_sdio_off (2)
<6>[21082.234143] mtk_wcn_cmb_sdio_on (2)
<3>[21082.234178] msdc2 -> USR Resume <- msdc_pm() : L<1260> PID
<3>[21082.234759] msdc2 -> sdio ops_get_cd<1> <- msdc_ops_get_cd() : L<3056> PID
<3>[21082.267187] msdc2 -> ================ <- msdc_set_mclk() : L<727> PID
<3>[21082.267205] msdc2 -> !!! Set<260KHz> Source<197000KHz> -> sclk<259KHz> DDR<0> mode<0> div<190> <- msdc_set_mclk() : L<729> PID
<3>[21082.267221] msdc2 -> ================ <- msdc_set_mclk() : L<730> PID
<3>[21082.287492] msdc2 -> XXX CMD<52> MSDC_INT_CMDTMO Arg<0x00000c00> <- msdc_irq() : L<3241>
<3>[21082.288076] msdc2 -> XXX CMD<52> MSDC_INT_CMDTMO Arg<0x80000c08> <- msdc_irq() : L<3241>
<3>[21082.292367] msdc2 -> XXX CMD<8> MSDC_INT_CMDTMO Arg<0x000001aa> <- msdc_irq() : L<3241>
<3>[21082.296566] msdc2 -> select card<0x00010000> <- msdc_command_start() : L<1320> PID
<3>[21082.317613] msdc2 -> SD latch data<0> cmd<0> <- msdc_ops_set_ios() : L<3001> PID
<3>[21082.317654] msdc2 -> ================ <- msdc_set_mclk() : L<727> PID
<3>[21082.317669] msdc2 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<729> PID
<3>[21082.317683] msdc2 -> ================ <- msdc_set_mclk() : L<730> PID
<6>[21082.318435] mmc1: new high speed SDIO card at address 0001
<6>[21082.319301] [WMT-DFT][I]hif_sdio_probe:start!
<6>[21082.319314] [WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x6628) num(0x1)
<6>[21082.319325] [WMT-DFT][I]hif_sdio_probe:card->info[0]: 6628
<6>[21082.319333] [WMT-DFT][I]hif_sdio_probe:card->info[1]: Combo
<6>[21082.319341] [WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[21082.319349] [WMT-DFT][I]hif_sdio_probe:card->info[3]:
<6>[21082.319435] [WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(520192)
<6>[21082.386902] [WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[21082.387013] [2:kthreadd] fork [8671:kthreadd]
<6>[21082.387044] [WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<7>[21083.249867] [2:kthreadd] fork [8672:kthreadd]
<6>[21083.338291] [WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(6628) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[21083.338306] [WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[21083.338324] [WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 coredump:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[21083.338946] [STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<3>[21083.338979] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<4>[21083.339246] [STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<6>[21083.342639] [RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[21083.342660] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[21083.343177] [1:init] fork [8673:init]
<7>[21083.348884] [225:WifiService] fork [8674:WifiService]
<7>[21083.349071] [8674:WifiService] set proc[8674] name: -> [WifiMonitor]
<7>[21083.350396] [8673:init] set proc[8673] name: -> [logwrapper]
<7>[21083.359362] [8673:logwrapper] fork [8675:logwrapper]
<7>[21083.365236] [8675:logwrapper] set proc[8675] name: -> [wpa_supplicant]
<7>[21083.366434] [198:er.ServerThread] fork [8676:er.ServerThread]
<7>[21083.379823] [8676:er.ServerThread] set proc[8676] name: -> [Thread-497]
<7>[21083.382904] [225:WifiService] fork [8677:WifiService]
<7>[21083.385243] [8677:WifiService] set proc[8677] name: -> [WifiWatchdogThr]
<7>[21083.387034] [8676:Thread-497] exit
<7>[21083.406227] [268:m.android.phone] fork [8678:m.android.phone]
<7>[21083.413012] [8678:m.android.phone] set proc[8678] name: -> [Thread-355]
<7>[21083.418349] [268:m.android.phone] fork [8679:m.android.phone]
<7>[21083.421453] [8679:m.android.phone] set proc[8679] name: -> [Thread-356]
<7>[21083.424148] [268:m.android.phone] fork [8680:m.android.phone]
<7>[21083.427794] [8680:m.android.phone] set proc[8680] name: -> [Thread-357]
<7>[21083.432975] [268:m.android.phone] fork [8681:m.android.phone]
<7>[21083.434055] [8681:m.android.phone] set proc[8681] name: -> [Thread-358]
<4>[21083.536902] is_lcm_online_test=0lcm_esd_check is begning...
<4>[21083.536996] lcm_esd_check to false...
<7>[21083.829267] [8667:AsyncTask #1] fork [8682:AsyncTask #1]
<7>[21083.833710] [8682:AsyncTask #1] set proc[8682] name: -> [dmesg]
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GRK39F
ro.build.display.id=Z1268_A008_DW-E20_L002
ro.build.version.incremental=166
ro.custom.build.version=Z1268_DW-E20_L002
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=2013年 01月 15日 星期二 21:30:54 CST
ro.build.date.utc=1358256654
ro.build.type=user
ro.build.user=jenkins
ro.build.host=scm-builder2
ro.build.tags=test-keys
ro.product.model=DW-E20
ro.product.brand=DW-E20
ro.product.name=DW-E20
ro.product.device=DW-E20
ro.product.board=DW-E20
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=alps
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=DW-E20
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=z1268-user 4.0.4 GRK39F 166 test-keys
ro.build.fingerprint=DW-E20/z1268/z1268:4.0.4/GRK39F/:user/test-keys
ro.build.flavor=
persist.sys.language=zh
persist.sys.country=CN
persist.sys.localevar=
persist.sys.timezone=Europe/Amsterdam
ro.product.locale.language=en
ro.product.locale.region=IT
ro.adups.fota.oem=DW-E20
ro.adups.fota.device=DW-E20
ro.adups.fota.version=Z1268_DW-E20_L002
ro.product.project=Z1268
ro.product.branch=Z1268
ro.product.client=DW-E20
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=ALPS.GB2.TDD.MP.V2.19
ro.mediatek.platform=MT6575
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.GB2.TDD.MP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
# Power off opt in IPO
sys.ipo.pwrdncap=2
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.sf.hwrotation=180
ril.current.share_modem=2
curlockscreen=2
ro.mediatek.gemini_support=true
ro.mediatek.drm_support=true
persist.radio.fd.counter=20
persist.radio.fd.off.counter=20
mediatek.wlan.chip=MT6628
mediatek.wlan.module.postfix=_mt6628
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.config.ringtone=CaribbeanIce.ogg
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
lca_core 2718 0 - Live 0xbf000000 (P)
pvrsrvkm 163650 37 mtklfb, Live 0xbf006000
mtklfb 14525 0 - Live 0xbf03c000
mtk_drvb 4403 0 - Live 0xbf046000 (P)
mtk_hif_sdio 17706 2 wlan_mt6628,mtk_stp_wmt, Live 0xbf04d000
mtk_stp_wmt 366534 8 wlan_mt6628,mtk_fm_priv,mtk_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf058000 (P)
mtk_stp_uart 21521 0 - Live 0xbf0c2000 (P)
mtk_stp_gps 37166 0 - Live 0xbf0cd000
mtk_stp_bt 39754 0 - Live 0xbf0dc000
mtk_fm_drv 97682 1 mtk_fm_priv, Live 0xbf0eb000
mtk_fm_priv 2463 0 - Live 0xbf10c000 (P)
wlan_mt6628 280010 0 - Live 0xbf112000 (P)
ccci_plat 103182 3 sec,ccmni,ccci, Live 0xbf16f000 (P)
ccci 113293 11 ccmni, Live 0xbf192000 (P)
ccmni 16670 0 - Live 0xbf1bb000 (P)
mt6575_m4u 84174 4 - Live 0xbf1c6000 (P)
devinfo 756 0 - Live 0xbf1e3000 (P)
mt6575_vcodec_kernel_driver 23553 0 - Live 0xbf1e9000 (P)
sec 85935 0 - Live 0xbf1f5000 (P)
aed 17929 3 - Live 0xbf211000 (P)
RAM: 230 MB
System RAM: 230.000MB
mtkfb.0: 4.000MB
Flash: 4 GB (3.671 GB actual); 0.5 GB (0.472 GB actual)
mmcblk0: 3.671 GB
mtdblock: 0.018 GB
mtdblock1: 0.472 GB
Pantalla táctil para alps DW-E20
$6.6 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$3.61 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$63.06 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$6.59 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
$8.13 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
$1.36 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
Batería de repuesto para alps DW-E20
$6.6 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$3.61 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$63.06 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$6.59 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
$8.13 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
$1.36 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
Fundas para alps DW-E20
$6.6 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$63.06 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$3.61 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$6.59 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$8.13 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
$1.36 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
Find Similar devices | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |