1. Install SpecDevice
2. Run and decode your specs
3. Get your link (read more...)
General Specifications | |
---|---|
Manufacturer | MZ |
Model | GT-I8190 |
Firmware | 2.3.6; eng.sw03.1387551607; SDK10 |
CPU | 2 cores; SAMSUNG GOLDEN(montblanc) |
Display | 800 x 480; DPI: 240; Evaluated Size: 3,9" |
Touch screen | Multitouch 2 points |
GPU | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.7@276259 |
RAM | 256 MB (242 MB available) |
Flash | 2 GB (1.861 GB actual); 0.5 GB (0.472 GB actual) (see memory map tab) |
Communications | |
Phone | GSM; Net: EDGE |
WiFi | lca_core; IEEE 802.11 b/g/n; MediaTek MT6628; AP Mode |
USB Host | Yes |
Bluetooth | Bluetooth 3.0+HS, 4.0 |
GPS | No |
Advanced Features | |
Front camera | Photo: 1.9 MP; Max: 1600x1200; Focus: infinity; Flash modes: on off torch |
Back camera | Photo: 0.3 MP; Max size: 640x480; Focus: infinity; No flash |
Sensors | mmc328x 3-axis Magnetic Field sensor (MEMSIC); range: 0...600; resolution: 0,002 (0%); power: 0,25mA; |
mc3210 3-axis Accelerometer (Freescale); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; | |
ADCALSPS Proximity Sensor (adps9900); range: 0...1; resolution: 1 (100%); power: 0,13mA; | |
ADCALSPS Light Sensor (adps9900); range: 0...10240; resolution: 1 (0,01%); power: 0,13mA; | |
Gravity Sensor (Google Inc.); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; | |
Linear Acceleration Sensor (Google Inc.); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; | |
Rotation Vector Sensor (Google Inc.); range: 0...1; resolution: 0 (0%); power: 0,38mA; | |
Vibrator | Yes |
Supported languages | 41; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Portuguese; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
Battery | Technology: Li-ion; Voltage: 4200 |
FM radio | Supported by chipset |
SD Version: | 1.1 5 |
KERNEL: Linux version 2.6.35.7 (sw03@work01-pc) (gcc version 4.4.3 (GCC) ) #1 PREEMPT Fri Dec 20 22:59:59 CST 2013
CODENAME: REL
Mainboard: unknown
BRAND: samsung
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: E952
DISPLAY: JRO03H.I8190XXALJL
FINGERPRINT: alps/E952/E952:2.3.6/GRK39F/eng.release-builder.1387551780:eng/test-keys
HARDWARE: mt6575
ID: GRK39F
TAGS: test-keys
Processor : ARMv7 Processor rev 1 (v7l)
BogoMIPS : 1998.84
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc09
CPU revision : 10
Hardware : SAMSUNG GOLDEN(montblanc)
HardwareP1 : MT6575
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_stream2
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<7>[ 4186.636304] [3150:ls] exit
<7>[ 4186.636437] [3150:ls] sig 17 to [3148:dhcpcd-run-hook]
<7>[ 4186.644204] [3148:dhcpcd-run-hook] fork [3151:dhcpcd-run-hook]
<7>[ 4186.662480] [3151:dhcpcd-run-hook] set proc[3151] name: -> [setprop]
<7>[ 4186.670660] [3151:setprop] exit
<7>[ 4186.670791] [3151:setprop] sig 17 to [3148:dhcpcd-run-hook]
<7>[ 4186.671191] [3148:dhcpcd-run-hook] fork [3152:dhcpcd-run-hook]
<7>[ 4186.676690] [3152:dhcpcd-run-hook] set proc[3152] name: -> [setprop]
<7>[ 4186.688817] [3152:setprop] exit
<7>[ 4186.688949] [3152:setprop] sig 17 to [3148:dhcpcd-run-hook]
<7>[ 4186.689350] [3148:dhcpcd-run-hook] fork [3153:dhcpcd-run-hook]
<7>[ 4186.702919] [3153:dhcpcd-run-hook] set proc[3153] name: -> [setprop]
<7>[ 4186.709072] [3153:setprop] exit
<7>[ 4186.709201] [3153:setprop] sig 17 to [3148:dhcpcd-run-hook]
<7>[ 4186.709622] [3148:dhcpcd-run-hook] fork [3154:dhcpcd-run-hook]
<7>[ 4186.713806] [3154:dhcpcd-run-hook] set proc[3154] name: -> [setprop]
<7>[ 4186.719104] [3154:setprop] exit
<7>[ 4186.719227] [3154:setprop] sig 17 to [3148:dhcpcd-run-hook]
<7>[ 4186.720372] [3148:dhcpcd-run-hook] fork [3155:dhcpcd-run-hook]
<7>[ 4186.723433] [3155:dhcpcd-run-hook] set proc[3155] name: -> [ls]
<7>[ 4186.738564] [2907:Smack Packet Re] sig 13 to [2907:Smack Packet Re]
<7>[ 4186.750330] [3155:ls] exit
<7>[ 4186.750471] [3155:ls] sig 17 to [3148:dhcpcd-run-hook]
<5>[ 4186.752099] [Power/Alarm] alarm 2 set 4202.445000000
<7>[ 4186.753792] [3148:dhcpcd-run-hook] fork [3156:dhcpcd-run-hook]
<7>[ 4186.757193] [3156:dhcpcd-run-hook] set proc[3156] name: -> [setprop]
<7>[ 4186.762530] [3156:setprop] exit
<7>[ 4186.762655] [3156:setprop] sig 17 to [3148:dhcpcd-run-hook]
<7>[ 4186.763785] [3148:dhcpcd-run-hook] fork [3157:dhcpcd-run-hook]
<7>[ 4186.766255] [3157:dhcpcd-run-hook] set proc[3157] name: -> [ls]
<7>[ 4186.771666] [3157:ls] exit
<7>[ 4186.771790] [3157:ls] sig 17 to [3148:dhcpcd-run-hook]
<7>[ 4186.780186] [3148:dhcpcd-run-hook] exit
<7>[ 4186.780999] [3148:dhcpcd-run-hook] sig 17 to [392:dhcpcd]
<7>[ 4186.843457] [3145:dmesg] exit
<7>[ 4186.843642] [3145:dmesg] sig 17 to [3135:AsyncTask #1]
<6>[ 4186.870924] [RTlog delete] fib_netdev_event() wlan0 NETDEV_DOWN!
<6>[ 4186.874872] [WLAN] rfkill_set_block(blocked 1)
<6>[ 4186.874882] [WLAN] Power off
<3>[ 4186.874896] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(4) type(3) start
<4>[ 4186.874917] [STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<6>[ 4186.875006] src = COMBO_IF_UART, to enter deep idle? 0
<4>[ 4186.890091] [STP-PSM] [I]_stp_psm_do_wait: STP is waiting state for ACT, i=1
<6>[ 4186.890127] [WMT-DFT][I]hif_sdio_wifi_off:start!
<5>[ 4186.890151] [wlan] Remove wlan!
<5>[ 4186.890565] [wlan]
<1>[ 4186.890572] tx_thread should stop now...
<3>[ 4186.890580] [wlan] OID Timeout! Releasing pending OIDs ..
<5>[ 4186.890591] [wlan] mtk_sdiod stops
<7>[ 4186.890605] [375:tx_thread] exit
<5>[ 4186.890662] [wlan] mtk_sdiod stopped
<6>[ 4186.910656] [wlan] QM: Enter qmFlushRxQueues()
<6>[ 4186.911060] [wlan] QM: Enter qmFlushTxQueues()
<5>[ 4186.911115] [wlan] Number of Stalled Packets = 0
<7>[ 4186.929642] [242:NativeDaemonCon] fork [3158:NativeDaemonCon]
<7>[ 4186.929814] [3158:NativeDaemonCon] set proc[3158] name: -> [Thread-185]
<7>[ 4186.932350] [3158:Thread-185] exit
<7>[ 4186.992246] [2907:Smack Packet Re] exit
<7>[ 4186.992518] [2906:Smack Packet Wr] exit
<7>[ 4186.995985] [392:dhcpcd] exit
<7>[ 4186.996254] [392:dhcpcd] sig 17 to [1:init]
<3>[ 4186.996433] init: untracked pid 392 exited
<7>[ 4187.009395] [2005:GTalkConnWorker] fork [3159:GTalkConnWorker]
<7>[ 4187.009443] [3159:GTalkConnWorker] set proc[3159] name: -> [close-XMPP-conn]
<7>[ 4187.012560] [3159:close-XMPP-conn] exit
<5>[ 4187.170035] [wlan] unregisterdev(0xc7df6000)
<6>[ 4187.170102] [WMT-DFT][I]hif_sdio_wifi_off:ok!
<7>[ 4187.170132] [276:ksdioirqd/mmc1] exit
<6>[ 4187.170217] [WMT-DFT][I]hif_sdio_wifi_off:sdio_release_irq() for wifi ok
<4>[ 4187.170232] mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[ 4187.170241] mtk_wcn_cmb_sdio_off (3)
<3>[ 4187.170251] msdc3 -> USR Suspend <- msdc_pm() : L<1206> PID
<6>[ 4187.170294] [WMT-DFT][I]hif_sdio_remove:start!
<6>[ 4187.170341] [WMT-DFT][I]hif_sdio_remove:sdio func(0xc9a6d3a0) is removed successfully!
<6>[ 4187.170419] mmc1: card 0001 removed
<3>[ 4187.190057] msdc3 -> save latch data<1> cmd<1> <- msdc_ops_set_ios() : L<2981> PID
<3>[ 4187.190073] msdc3 -> set mclk to 0 <- msdc_set_mclk() : L<644> PID
<3>[ 4187.190196] [WMT-CORE][I]opfunc_func_off:WMT-CORE:Fun(3) [POWER_OFF] and power down chip
<4>[ 4187.190217] [STP-PSM] [I]_stp_psm_is_redundant_active_op: redundant opId found, opId(1), preOpid(1)
<6>[ 4187.190238] [STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[ 4187.190250] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[ 4187.190262] [STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[ 4187.190270] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(1)
<4>[ 4187.190283] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[ 4187.190293] Flush type = 4 Rx Queue
<3>[ 4187.210511] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(close_stp) result(0)
<3>[ 4187.210529] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, hw_pwr_off start
<3>[ 4187.210541] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, BGF_EINT IRQ unregistered and disabled
<3>[ 4187.210555] [WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 4187.210566] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, ALL_EINT IRQ unregistered and disabled
<3>[ 4187.210576] [WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 4187.210587] [WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[ 4187.210601] [WMT-PLAT][I]wmt_plat_i2s_ctrl:[MT662x]warnning:FM digital mode is not set, no I2S GPIO settings should be modified by combo driver
<3>[ 4187.210614] [WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<3>[ 4187.210625] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[ 4187.210635] [WMT-PLAT][W]wmt_plat_gps_lna_ctrl:host gps lna pin not defined!!!
<3>[ 4187.210645] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, hw_pwr_off finish
<3>[ 4187.210654] [WMT-CORE][W]opfunc_pwr_off:HW_PWR_OFF ok
<3>[ 4187.210668] [WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC OFF]status(b:0 f:0 g:0 w:0 lpbk:0 coredump:0 wmt:0 sd1:0 sd2:0 stp:0)
<6>[ 4187.210701] [STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[ 4187.210719] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(4) type(3) ok
<7>[ 4187.251259] [103:zygote] fork [3160:zygote]
<7>[ 4187.352534] [3160:zygote] fork [3161:zygote]
<7>[ 4187.352731] [3161:zygote] set proc[3161] name: -> [HeapWorker]
<7>[ 4187.353770] [3160:zygote] fork [3162:zygote]
<7>[ 4187.353949] [3162:zygote] set proc[3162] name: -> [GC]
<7>[ 4187.354318] [3160:zygote] fork [3163:zygote]
<7>[ 4187.354485] [3163:zygote] set proc[3163] name: -> [Signal Catcher]
<7>[ 4187.354877] [3160:zygote] fork [3164:zygote]
<7>[ 4187.355044] [3164:zygote] set proc[3164] name: -> [Compiler]
<7>[ 4187.366102] [3160:zygote] fork [3165:zygote]
<7>[ 4187.367636] [3165:zygote] set proc[3165] name: -> [BinderThd_AP316]
<7>[ 4187.372131] [3160:zygote] set proc[3160] name: -> [re-initialized>]
<7>[ 4187.375240] [3165:BinderThd_AP316] fork [3166:BinderThd_AP316]
<7>[ 4187.380501] [3166:BinderThd_AP316] set proc[3166] name: -> [BinderThd_AP316]
<7>[ 4187.399805] [3160:re-initialized>] set proc[3160] name: -> [d.process.acore]
<6>[ 4187.411202] [WLAN] rfkill_set_block(blocked 0)
<6>[ 4187.411213] [WLAN] Power on
<3>[ 4187.411227] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[ 4187.411244] [STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[ 4187.411469] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[ 4187.411483] [WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(not defined)
<3>[ 4187.411492] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO185)
<3>[ 4187.411501] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(GPIO122)
<3>[ 4187.411525] [WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[ 4187.411534] [WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO15)
<3>[ 4187.411543] [WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(18)
<3>[ 4187.411552] [WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO17)
<3>[ 4187.411561] [WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(17)
<3>[ 4187.411570] [WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<3>[ 4187.411579] [WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[ 4187.411587] [WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[ 4187.411596] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[ 4187.411605] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[ 4187.411613] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[ 4187.411623] [WMT-PLAT][I]wmt_plat_dump_pin_conf:FM digital mode is not set, no need for I2S GPIOs
<3>[ 4187.411633] [WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(not defined)
<3>[ 4187.411642] [WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(not defined)
<3>[ 4187.411652] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[ 4187.411663] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<3>[ 4187.411674] [WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 4187.411684] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[ 4187.411698] [WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 4187.411708] [WMT-PLAT][W]wmt_plat_gps_lna_ctrl:host gps lna pin not defined!!!
<3>[ 4187.411718] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<7>[ 4187.447311] [5:khelper] fork [3167:khelper]
<7>[ 4187.447357] [3167:khelper] fork [3168:khelper]
<7>[ 4187.447405] [3168:khelper] exit
<7>[ 4187.447427] [3168:khelper] sig 17 to [3167:khelper]
<7>[ 4187.447641] [5:khelper] fork [3169:khelper]
<7>[ 4187.447657] [3167:khelper] exit
<7>[ 4187.447856] [3169:khelper] fork [3170:khelper]
<7>[ 4187.447897] [3170:khelper] exit
<7>[ 4187.447916] [3170:khelper] sig 17 to [3169:khelper]
<7>[ 4187.447947] [3169:khelper] exit
<7>[ 4187.448131] [5:khelper] fork [3171:khelper]
<7>[ 4187.448697] [3171:khelper] fork [3172:khelper]
<7>[ 4187.448745] [3172:khelper] exit
<7>[ 4187.448765] [3172:khelper] sig 17 to [3171:khelper]
<7>[ 4187.448798] [3171:khelper] exit
<7>[ 4187.449038] [5:khelper] fork [3173:khelper]
<7>[ 4187.449138] [3173:khelper] fork [3174:khelper]
<7>[ 4187.449178] [3174:khelper] exit
<7>[ 4187.449196] [3174:khelper] sig 17 to [3173:khelper]
<7>[ 4187.449397] [377:wpa_supplicant] exit
<7>[ 4187.449657] [377:wpa_supplicant] sig 17 to [1:init]
<3>[ 4187.449897] init: untracked pid 377 exited
<7>[ 4187.449931] [3173:khelper] exit
<7>[ 4187.599908] [3048:Thread-214] exit
<3>[ 4187.620077] [WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[ 4187.620096] [WMT-PLAT][I]wmt_plat_i2s_ctrl:[MT662x]warnning:FM digital mode is not set, no I2S GPIO settings should be modified by combo driver
<3>[ 4187.620111] [WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<4>[ 4187.620291] [STP-PSM] [E]_stp_psm_notify_stp(1174):ERROR! Invalid Action!!
<4>[ 4187.620298]
<3>[ 4187.620318] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[ 4187.620330] [WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 4187.620341] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<4>[ 4187.620475] mt6575_get_bus_freq() return 192400
<3>[ 4187.620611] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[ 4187.620621] Flush type = 4 Rx Queue
<3>[ 4187.620747] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[ 4187.620762] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[ 4187.620774] [STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[ 4187.620782] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[ 4187.620792] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<6>[ 4187.620804] [STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[ 4187.620815] [STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[ 4187.620826] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[ 4187.620837] [STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[ 4187.626441] [WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6628)
<3>[ 4187.632041] [WMT-IC][I]mt6628_ver_check:MT6628: read hw_ver (hw version) (0x8b10)
<3>[ 4187.637631] [WMT-IC][I]mt6628_ver_check:MT6628: read fw_ver (rom version) (0x8b10)
<3>[ 4187.637644] [WMT-IC][I]mt6628_find_wmt_ic_info:found ic info(0x8b10) by full match! index:2
<3>[ 4187.637658] [WMT-IC][I]mt6628_ver_check:MT6628: wmt ic info: MT6628.E3 (0x8b10, WMTHWVER:2, patch_ext:_e2)
<3>[ 4187.637671] [WMT-CORE][I]wmt_core_hw_check:chip id(0x6628) ver_check ok
<3>[ 4187.648516] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[ 4187.648530] [WMT-IC][I]mt6628_sw_init:WMT-CORE: change baudrate(4000000) ok
<3>[ 4187.655085] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(srh_patch) result(0)
<3>[ 4187.655100] [WMT-IC][I]mt6628_patch_dwn:valid patch found: (/system/etc/firmware//mt6628_patch_e2_hdr.bin)
<3>[ 4187.657109] [WMT-IC][I]mt6628_patch_dwn:===========================================
<3>[ 4187.657123] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Built Time = 20120720151042a
<3>[ 4187.657134] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[ 4187.657144] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[ 4187.657154] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Ph Ver = 0x0010
<3>[ 4187.657163] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Platform = 1150
<3>[ 4187.657173] [WMT-IC][I]mt6628_patch_dwn:===========================================
<3>[ 4187.770086] [WMT-CTRL][W]wmt_ctrl_rx:wmt_ctrl_rx be signaled, but no rx data(200)
<3>[ 4187.788252] [WMT-IC][I]mt6628_patch_dwn:wmt_core: patch dwn:0 frag(20, 844) ok
<3>[ 4187.788885] [WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf0868dc)
<3>[ 4187.789885] [WMT-IC][I]mt6628_sw_init:init_coex ok
<6>[ 4187.790650] [STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[ 4187.790665] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[ 4187.790677] [STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[ 4187.790687] [WMT-IC][I]mt6628_sw_init:enable host STP-UART-FULL mode
<3>[ 4187.813050] [WMT-IC][I]mt6628_sw_init:set fm mode (2) ok
<3>[ 4187.813061] [WMT-IC][I]mt6628_sw_init:disable mt662x firmware coredump
<6>[ 4187.813073] [STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[ 4187.813093] [STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[ 4187.813104] mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[ 4187.813112] board_sdio_ctrl force off before on
<6>[ 4187.813119] mtk_wcn_cmb_sdio_off (3)
<6>[ 4187.813154] mtk_wcn_cmb_sdio_on (3)
<3>[ 4187.813187] msdc3 -> USR Resume <- msdc_pm() : L<1231> PID
<3>[ 4187.815484] msdc3 -> sdio ops_get_cd<1> <- msdc_ops_get_cd() : L<3028> PID
<7>[ 4187.815837] [3068:Thread-217] exit
<7>[ 4187.815953] [3069:Thread-218] exit
<3>[ 4187.850289] msdc3 -> ================ <- msdc_set_mclk() : L<692> PID
<3>[ 4187.850306] msdc3 -> !!! Set<260KHz> Source<197000KHz> -> sclk<259KHz> DDR<0> mode<0> div<190> <- msdc_set_mclk() : L<694> PID
<3>[ 4187.850320] msdc3 -> ================ <- msdc_set_mclk() : L<695> PID
<3>[ 4187.870617] msdc3 -> XXX CMD<52> MSDC_INT_CMDTMO Arg<0x00000c00> <- msdc_irq() : L<3213>
<3>[ 4187.871217] msdc3 -> XXX CMD<52> MSDC_INT_CMDTMO Arg<0x80000c08> <- msdc_irq() : L<3213>
<3>[ 4187.875529] msdc3 -> XXX CMD<8> MSDC_INT_CMDTMO Arg<0x000001aa> <- msdc_irq() : L<3213>
<3>[ 4187.877954] msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1291> PID
<3>[ 4187.911258] msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<2973> PID
<3>[ 4187.911292] msdc3 -> ================ <- msdc_set_mclk() : L<692> PID
<3>[ 4187.911307] msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<694> PID
<3>[ 4187.911321] msdc3 -> ================ <- msdc_set_mclk() : L<695> PID
<6>[ 4187.912656] mmc1: new high speed SDIO card at address 0001
<6>[ 4187.916780] [WMT-DFT][I]hif_sdio_probe:start!
<6>[ 4187.916794] [WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x6628) num(0x1)
<6>[ 4187.916804] [WMT-DFT][I]hif_sdio_probe:card->info[0]: 6628
<6>[ 4187.916812] [WMT-DFT][I]hif_sdio_probe:card->info[1]: Combo
<6>[ 4187.916820] [WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[ 4187.916828] [WMT-DFT][I]hif_sdio_probe:card->info[3]:
<6>[ 4187.916988] [WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(520192)
<6>[ 4187.970141] [WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[ 4187.970266] [2:kthreadd] fork [3175:kthreadd]
<6>[ 4187.980560] [WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<5>[ 4187.980589] [wlan] net_device prDev(0xc5f05000) allocated
<5>[ 4187.995837] [wlan] Open FW image: WIFI_RAM_CODE done
<6>[ 4188.020408] yaffs: userdata sync do_checkpoint 0,gc_urgen 1
<6>[ 4188.020420] yaffs: userdata yaffs_FlushSuperBlock 0
<7>[ 4188.029647] [3160:d.process.acore] fork [3176:d.process.acore]
<7>[ 4188.029697] [3176:d.process.acore] set proc[3176] name: -> [ApplicationsPro]
<5>[ 4188.099693] [wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[ 4188.099800] [wlan] Virtual Address = cfe15000 for COMMON MGMT MEMORY POOL.
<5>[ 4188.099815] [wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[ 4188.099839] [wlan] Virtual Address = cfe18000 for SW_RFB_T.
<5>[ 4188.099849] [wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[ 4188.099884] [wlan] Virtual Address = cfe1d000 for MSDU_INFO_T.
<6>[ 4188.099897] [wlan] wlanAdapterStart(): Acquiring LP-OWN
<6>[ 4188.121530] [wlan] Chip ID: 0x6628
<6>[ 4188.121544] [wlan] Revision ID: 0x0
<7>[ 4188.281606] [103:zygote] fork [3177:zygote]
<7>[ 4188.286666] [3177:zygote] fork [3178:zygote]
<7>[ 4188.290430] [3178:zygote] set proc[3178] name: -> [HeapWorker]
<7>[ 4188.292082] [3177:zygote] fork [3179:zygote]
<7>[ 4188.293541] [3179:zygote] set proc[3179] name: -> [GC]
<7>[ 4188.293977] [3177:zygote] fork [3180:zygote]
<7>[ 4188.295577] [3180:zygote] set proc[3180] name: -> [Signal Catcher]
<7>[ 4188.296068] [3177:zygote] fork [3181:zygote]
<7>[ 4188.297510] [3181:zygote] set proc[3181] name: -> [Compiler]
<7>[ 4188.350875] [3160:d.process.acore] fork [3182:d.process.acore]
<7>[ 4188.351230] [3182:d.process.acore] exit
<7>[ 4188.492128] [3177:zygote] fork [3183:zygote]
<7>[ 4188.495071] [3177:zygote] set proc[3177] name: -> [re-initialized>]
<7>[ 4188.500773] [3183:zygote] set proc[3183] name: -> [BinderThd_AP317]
<7>[ 4188.504606] [3183:BinderThd_AP317] fork [3184:BinderThd_AP317]
<7>[ 4188.519775] [3177:re-initialized>] set proc[3177] name: -> [com.svox.pico]
<7>[ 4188.521864] [3184:BinderThd_AP317] set proc[3184] name: -> [BinderThd_AP317]
<7>[ 4188.586693] [103:zygote] fork [3185:zygote]
<7>[ 4188.591547] [3185:zygote] fork [3186:zygote]
<7>[ 4188.592918] [3186:zygote] set proc[3186] name: -> [HeapWorker]
<7>[ 4188.596299] [3185:zygote] fork [3187:zygote]
<7>[ 4188.598315] [3187:zygote] set proc[3187] name: -> [GC]
<7>[ 4188.605269] [3185:zygote] fork [3188:zygote]
<7>[ 4188.607818] [3188:zygote] set proc[3188] name: -> [Signal Catcher]
<7>[ 4188.608533] [3185:zygote] fork [3189:zygote]
<7>[ 4188.621476] [3189:zygote] set proc[3189] name: -> [Compiler]
<7>[ 4188.625481] [3185:zygote] fork [3190:zygote]
<7>[ 4188.629897] [3190:zygote] set proc[3190] name: -> [BinderThd_AP318]
<7>[ 4188.638855] [3185:zygote] set proc[3185] name: -> [re-initialized>]
<7>[ 4188.640568] [3190:BinderThd_AP318] fork [3191:BinderThd_AP318]
<7>[ 4188.640828] [3191:BinderThd_AP318] set proc[3191] name: -> [BinderThd_AP318]
<7>[ 4188.651851] [3185:re-initialized>] set proc[3185] name: -> [ainfire.supersu]
<7>[ 4188.859172] [3160:d.process.acore] fork [3192:d.process.acore]
<7>[ 4188.859237] [3192:d.process.acore] set proc[3192] name: -> [Thread-10]
<7>[ 4188.870564] [3192:Thread-10] fork [3193:Thread-10]
<7>[ 4188.873185] [3193:Thread-10] set proc[3193] name: -> [Thread-11]
<7>[ 4188.874866] [3192:Thread-10] exit
<6>[ 4188.934221] [wlan] wlanAdapterStart(): Waiting for Ready bit..
<6>[ 4188.950077] [wlan] Ready bit asserted
<5>[ 4189.065969] [wlan] [wifi] wlan%d netif_carrier_off
<6>[ 4189.065985] [wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[ 4189.066062] [wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[ 4189.067581] [wlan] Domain: map=0, idx=0, code=0x0000
<7>[ 4189.081025] [2:kthreadd] fork [3194:kthreadd]
<5>[ 4189.081072] [wlan] tx_thread starts running...
<6>[ 4189.103537] [WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(6628) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[ 4189.103552] [WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[ 4189.103571] [WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 coredump:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[ 4189.104322] [STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<3>[ 4189.104354] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<4>[ 4189.104605] [STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<4>[ 4189.150171] select 2968 (d.process.media), adj 10, size 4358, to kill
<4>[ 4189.150193] send sigkill to 2968 (d.process.media), adj 10, size 4358
<7>[ 4189.150206] [38:lowmemorykiller] sig 9 to [2968:d.process.media]
<7>[ 4189.150295] [2979:BinderThd_AP296] exit
<7>[ 4189.150501] [2968:d.process.media] exit
<7>[ 4189.150529] [2969:HeapWorker] exit
<7>[ 4189.150558] [2970:GC] exit
<7>[ 4189.150706] [2972:Compiler] exit
<7>[ 4189.150742] [2973:BinderThd_AP296] exit
<7>[ 4189.150768] [2974:BinderThd_AP296] exit
<7>[ 4189.150794] [2976:thumbs thread] exit
<7>[ 4189.150819] [2977:thumbs-cache-th] exit
<7>[ 4189.150844] [2980:BinderThd_AP296] exit
<7>[ 4189.152207] [2971:Signal Catcher] exit
<6>[ 4189.218278] [RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[ 4189.218300] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[ 4189.218700] [372:BinderThd_AP200] fork [3195:BinderThd_AP200]
<7>[ 4189.220729] [3195:BinderThd_AP200] set proc[3195] name: -> [executeAppTrans]
<7>[ 4189.231652] [3195:executeAppTrans] exit
<7>[ 4189.249172] [1:init] fork [3196:init]
<7>[ 4189.321835] [3196:init] set proc[3196] name: -> [logwrapper]
<7>[ 4189.475284] [246:WifiService] fork [3197:WifiService]
<7>[ 4189.475362] [3197:WifiService] set proc[3197] name: -> [WifiMonitor]
<7>[ 4189.477059] [3193:Thread-11] exit
<7>[ 4189.510602] [3196:logwrapper] fork [3198:logwrapper]
<7>[ 4189.514503] [2971:Signal Catcher] sig 17 to [103:zygote]
<7>[ 4189.520484] [3198:logwrapper] set proc[3198] name: -> [wpa_supplicant]
<7>[ 4189.578532] [246:WifiService] fork [3199:WifiService]
<7>[ 4189.581712] [3199:WifiService] set proc[3199] name: -> [WifiWatchdogThr]
<7>[ 4189.934967] [3135:AsyncTask #1] fork [3200:AsyncTask #1]
<5>[ 4189.942618] [wlan] N=0 closed
<5>[ 4189.942638] [wlan] EVENT-ROAMING ABORT: Current Time = 3889930
<5>[ 4189.942650] [wlan] [13] TRANSITION: [0] -> [0]
<7>[ 4189.942859] [5:khelper] fork [3201:khelper]
<7>[ 4189.943058] [3201:khelper] fork [3202:khelper]
<7>[ 4189.943108] [3202:khelper] exit
<7>[ 4189.943130] [3202:khelper] sig 17 to [3201:khelper]
<7>[ 4189.943165] [3201:khelper] exit
<6>[ 4189.943832] [wlan] NAF=0,0,0
<6>[ 4189.944034] [wlan] NAF=0,0,0
<7>[ 4189.977486] [3200:AsyncTask #1] set proc[3200] name: -> [dmesg]
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GRK39F
ro.build.display.id=JRO03H.I8190XXALJL
ro.build.version.incremental=eng.sw03.1387551607
ro.custom.build.version=V2G.13.12.20
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.6
ro.build.date=Fri Dec 20 23:03:00 CST 2013
ro.build.date.utc=1387551780
ro.build.type=user
ro.build.user=release-builder
ro.build.host=smartphone
ro.build.tags=test-keys
ro.product.model=GT-I8190
ro.product.name=E952
ro.product.device=E952
ro.product.brand=samsung
ro.product.board=
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=MZ
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=E952
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=E952-eng 2.3.6 GRK39F eng.release-builder.1387551780 test-keys
ro.build.fingerprint=alps/E952/E952:2.3.6/GRK39F/eng.release-builder.1387551780:eng/test-keys
persist.sys.timezone=Asia/Shanghai
ro.adups.fota.oem=hezhi
ro.adups.fota.device=e952_g_s_v60Foreign_common
ro.adups.fota.version=V2G.13.12.20
ro.product.android.ver=4.1.2
ro.product.base.ver=I8190XXAMA2
ro.product.kernel.ver=3.0.31-809600 dpi@DELL171
ro.product.inner.ver=JZO54K.I8190XXAMA2
ro.product.model.setting=GT-I8190
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=JRO03H.I8190XXALJL
ro.mediatek.platform=MT6575
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.GB2.MP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#Dfish{
ro.sf.lcd_density=240
ro.media.enc.camera.platform=Mediatek
#Dfish}
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
#
# ADDITIONAL_BUILD_PROPERTIES
#
fmradio.driver.chip=3
ro.sf.hwrotation=180
ril.current.share_modem=1
launcher2.allappsgrid=3d_20
mzanimnumb=2
curlockscreen=1
ro.mediatek.gemini_support=false
ro.mediatek.drm_support=true
mediatek.wlan.chip=MT6628
mediatek.wlan.module.postfix=_mt6628
doublefish.vendor.pcb.name=PCB_E952
doublefish.mtk.modem.support=modem_2g
doublefish.cust.modem=moztek15cu_gprs_ad6548
doublefish.gemini=no
doublefish.lcd.width=480
doublefish.lcd.height=800
doublefish.touchpanel=ft6206
doublefish.accelerometer=bma250_250e_auto
kxtf9_auto
doublefish.alsps=pstouch
doublefish.mtk.branch=ALPS.GB2.MP
doublefish.custom.verno=V2G.13.12.20
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.config.ringtone=Over_the_horizon.ogg
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
lca_core 2718 0 - Live 0xbf000000 (P)
pvrsrvkm 163658 34 mtkbc,mtklfb, Live 0xbf006000
mtklfb 14525 0 - Live 0xbf03c000
mtkbc 6303 0 - Live 0xbf046000
mtk_drvb 4403 0 - Live 0xbf04d000 (P)
mtk_hif_sdio 17706 2 wlan_mt6628,mtk_stp_wmt, Live 0xbf054000
mtk_stp_wmt 363327 8 wlan_mt6628,mtk_fm_priv,mtk_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf05f000 (P)
mtk_stp_uart 21521 1 - Live 0xbf0c8000 (P)
mtk_stp_gps 37166 0 - Live 0xbf0d3000
mtk_stp_bt 39754 0 - Live 0xbf0e2000
mtk_fm_drv 98106 1 mtk_fm_priv, Live 0xbf0f1000
mtk_fm_priv 2427 0 - Live 0xbf112000 (P)
wlan_mt6628 271577 0 - Live 0xbf118000 (P)
ccci_plat 101892 3 sec,ccmni,ccci, Live 0xbf173000 (P)
ccci 138050 15 ccmni, Live 0xbf195000 (P)
ccmni 16350 0 - Live 0xbf1c4000 (P)
mt6575_m4u 84190 2 - Live 0xbf1ce000 (P)
devinfo 756 0 - Live 0xbf1eb000 (P)
mt6575_vcodec_kernel_driver 23905 0 - Live 0xbf1f1000 (P)
sec 84741 0 - Live 0xbf1fe000 (P)
aed 18230 3 - Live 0xbf21a000 (P)
RAM: 256 MB (242 MB available)
System RAM: 242.000MB
mtkfb.0: 4.000MB
Flash: 2 GB (1.861 GB actual); 0.5 GB (0.472 GB actual)
mmcblk0: 1.861 GB
mtdblock: 0.018 GB
mtdblock1: 0.472 GB
Touch Screen for MZ GT-I8190
$75.5 Omz mz Men's TShirt OMZ MZ World Vintage Motorcycle Fashion T Shirt Graphic Streetwear New Trend
$81.65 Summer Cotton O-Neck Short Sleeve Mens T Shirt New S-5XL East Germany MZ ETZ 251 Classic Motorcycle T-Shirt oversized COTTON
$77.25 Omz mz Men's TShirt Mz Logo Individuality T Shirt Graphic Sweatshirts New Trend
$11.46 E15 Motorcycle License Plate Light 22pcs LED Brake Tail Light For Suzuki TS 125/150/250 MZ ETZ 150/250/251/301 Simson SR50/S5
$69.93 T-Shirt Mz Logo Ifa Ddr Motorrad Ostkult Retro Etz Vintage Motorcycle 2019 Unisex Tees
$81.69 Motorcycle MZ OMZ Vintage German Mark Men T Shirt Omz mz Funny Tees Short Sleeve Crew Neck T-Shirt Cotton Party Tops
$14.11 Motorcycle Rear Tail Brake Light Round License Plate Light For Suzuki TS125 TS150 TS250 Simson SR50 S51 MZ ETZ 150 250 251
Replacement Battery for MZ GT-I8190
$75.5 Omz mz Men's TShirt OMZ MZ World Vintage Motorcycle Fashion T Shirt Graphic Streetwear New Trend
$81.65 Summer Cotton O-Neck Short Sleeve Mens T Shirt New S-5XL East Germany MZ ETZ 251 Classic Motorcycle T-Shirt oversized COTTON
$77.25 Omz mz Men's TShirt Mz Logo Individuality T Shirt Graphic Sweatshirts New Trend
$11.46 E15 Motorcycle License Plate Light 22pcs LED Brake Tail Light For Suzuki TS 125/150/250 MZ ETZ 150/250/251/301 Simson SR50/S5
$14.11 Motorcycle Rear Tail Brake Light Round License Plate Light For Suzuki TS125 TS150 TS250 Simson SR50 S51 MZ ETZ 150 250 251
$69.93 T-Shirt Mz Logo Ifa Ddr Motorrad Ostkult Retro Etz Vintage Motorcycle 2019 Unisex Tees
$81.69 Motorcycle MZ OMZ Vintage German Mark Men T Shirt Omz mz Funny Tees Short Sleeve Crew Neck T-Shirt Cotton Party Tops
Cover Cases for MZ GT-I8190
$11.46 E15 Motorcycle License Plate Light 22pcs LED Brake Tail Light For Suzuki TS 125/150/250 MZ ETZ 150/250/251/301 Simson SR50/S5
$77.25 Omz mz Men's TShirt Mz Logo Individuality T Shirt Graphic Sweatshirts New Trend
$81.65 Summer Cotton O-Neck Short Sleeve Mens T Shirt New S-5XL East Germany MZ ETZ 251 Classic Motorcycle T-Shirt oversized COTTON
$75.5 Omz mz Men's TShirt OMZ MZ World Vintage Motorcycle Fashion T Shirt Graphic Streetwear New Trend
$81.69 Motorcycle MZ OMZ Vintage German Mark Men T Shirt Omz mz Funny Tees Short Sleeve Crew Neck T-Shirt Cotton Party Tops
$69.93 T-Shirt Mz Logo Ifa Ddr Motorrad Ostkult Retro Etz Vintage Motorcycle 2019 Unisex Tees
$14.11 Motorcycle Rear Tail Brake Light Round License Plate Light For Suzuki TS125 TS150 TS250 Simson SR50 S51 MZ ETZ 150 250 251
Find Similar devices | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |