- General
- Detalles OS
- CPU info
- GPU extensiones
- Mensajes del kernel WiFi
- build.prop
- Módulos
- Mapa de la memoria
Dispositivo similar en la base de datos: Alps 5I (iPhone5 clone)
Especificaciones generales | |
---|---|
Marca | alps |
Modelo | 5I |
Versión de Android | 4.0.4; eng.1355144424; SDK15 |
CPU | 2 cores; ARMv7 Processor rev 0 (v7l); Max: 1001,0 MHz; Min: 250,2 MHz |
Pantalla | 854 x 480; DPI: 240; Evaluated Size: 4,1" |
Pantalla táctil | Multitouch 5 points |
GPU | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.8@905891 |
RAM | 512 MB (483 MB available) |
Flash | 4 GB (3.589 GB actual); 16 GB (14.837 GB actual) (ver pestaña de mapa de memoria) |
Comunicaciones | |
Teléfono | GSM, Dual SIM; Net: UMTS |
WiFi | wlan_mt6628; IEEE 802.11 b/g/n; MediaTek MT6628; AP Mode |
USB Host | No |
Bluetooth | Bluetooth 3.0+HS, 4.0 |
GPS | Yes |
Funciones avanzadas | |
Cámara frontal | Photo: 8.0 MP; Max: 3264x2448; Focus: infinity; Flash modes: on off torch |
Cámara trasera | Photo: 0.3 MP; Max size: 640x480; Focus: infinity; No flash |
Sensores | ADXL345 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; |
CM3623 Proximity Sensor (Capella); range: 0...1; resolution: 1 (100%); power: 0,13mA; | |
CM3623 Light Sensor (Capella); range: 0...10240; resolution: 1 (0,01%); power: 0,13mA; | |
Alarma vibrante | Yes |
Idiomas soportados | 43; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
Batería | Technology: Li-ion; Voltage: 4186 |
FM radio | Supported by chipset |
SD Version: | 1.1 5 |
KERNEL: Linux version 3.0.13 (user@qs26) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Mon Dec 10 21:00:12 CST 2012
CODENAME: REL
Mainboard: qishang77_cu_ics2
BRAND: alps
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: qishang77_cu_ics2
DISPLAY: ALPS.ICS2.MP.V1.9
FINGERPRINT: alps/qishang77_cu_ics2/qishang77_cu_ics2:4.0.4/IMM76D/1355144424:user/test-keys
HARDWARE: mt6577
ID: IMM76D
TAGS: test-keys
Processor : ARMv7 Processor rev 0 (v7l)
processor : 0
BogoMIPS : 1993.93
processor : 1
BogoMIPS : 2000.48
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc09
CPU revision : 0
Hardware : MT6577
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<3>[ 2789.141366] (1)msdc3 -> save latch data<1> cmd<1> <- msdc_ops_set_ios() : L<4127> PID
<3>[ 2789.141383] (1)msdc3 -> set mclk to 0 <- msdc_set_mclk() : L<928> PID
<5>[ 2789.141596] (1)[Power/clkmgr] [freq_meter] data = 15494, freq = 196 MHz
<3>[ 2789.141621] (1)[WMT-CORE][I]opfunc_func_off:WMT-CORE:Fun(3) [POWER_OFF] and power down chip
<4>[ 2789.141642] (1)[STP-PSM] [I]_stp_psm_is_redundant_active_op: redundant opId found, opId(1), preOpid(1)
<6>[ 2789.141667] (1)[STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[ 2789.141679] (1)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[ 2789.141692] (1)[STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[ 2789.141702] (1)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(1)
<4>[ 2789.141716] (1)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[ 2789.141729] (1)Flush type = 4 Rx Queue
<7>[ 2789.159488] (1)[1176:Smack Packet Re] sig 13 to [1176:Smack Packet Re]
<3>[ 2789.159960] (1)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(close_stp) result(0)
<3>[ 2789.159981] (1)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, hw_pwr_off start
<3>[ 2789.159994] (1)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, BGF_EINT IRQ unregistered and disabled
<3>[ 2789.160010] (1)[WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 2789.160021] (1)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, ALL_EINT IRQ unregistered and disabled
<3>[ 2789.160033] (1)[WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 2789.160046] (1)[WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[ 2789.160063] (1)[WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<3>[ 2789.160077] (1)[WMT-PLAT][W]wmt_plat_gps_lna_ctrl:host gps lna pin not defined!!!
<3>[ 2789.160088] (1)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, hw_pwr_off finish
<3>[ 2789.160098] (1)[WMT-CORE][W]opfunc_pwr_off:HW_PWR_OFF ok
<3>[ 2789.160114] (1)[WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC OFF]status(b:0 f:0 g:0 w:0 lpbk:0 coredump:0 wmt:0 sd1:0 sd2:0 stp:0)
<6>[ 2789.160161] (1)[STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[ 2789.160180] (1)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(4) type(3) ok
<7>[ 2789.164185] (1)[3048:unloadDriverThr] exit
<7>[ 2789.187206] (0)[1176:Smack Packet Re] exit
<5>[ 2789.203866] (0)[Power/Alarm] alarm 2 set 2803.657000000
<7>[ 2789.218083] (1)[3051:dmesg] exit
<7>[ 2789.218337] (1)[3051:dmesg] sig 17 to [3046:AsyncTask #2]
<7>[ 2789.252299] (0)[1175:Smack Packet Wr] exit
<7>[ 2789.304482] (0)[299:WifiStateMachin] fork [3053:WifiStateMachin]
<7>[ 2789.304571] (0)[3053:WifiStateMachin] set proc[3053] name: ->[loadDriverThrea]
<6>[ 2789.323874] (0)[WLAN] rfkill_set_block(blocked 0)
<6>[ 2789.323886] (0)[WLAN] Power on
<3>[ 2789.323902] (0)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[ 2789.323921] (0)[STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[ 2789.323971] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[ 2789.323986] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(GPIO124)
<3>[ 2789.323997] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO122)
<3>[ 2789.324006] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(not defined)
<3>[ 2789.324017] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[ 2789.324026] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO13)
<3>[ 2789.324037] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(14)
<3>[ 2789.324047] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO70)
<3>[ 2789.324057] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(0)
<3>[ 2789.324067] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<3>[ 2789.324078] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[ 2789.324088] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[ 2789.324097] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[ 2789.324107] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[ 2789.324117] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[ 2789.324127] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_CK(GPIO56)
<3>[ 2789.324137] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_WS(GPIO57)
<3>[ 2789.324147] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_DAT(GPIO58)
<3>[ 2789.324157] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(GPIO72)
<3>[ 2789.324167] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(not defined)
<3>[ 2789.324177] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[ 2789.324189] (1)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<3>[ 2789.324202] (1)[WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 2789.324222] (1)[WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 2789.324235] (1)[WMT-PLAT][W]wmt_plat_gps_lna_ctrl:host gps lna pin not defined!!!
<7>[ 2789.344277] (1)[256:er.ServerThread] fork [3054:er.ServerThread]
<7>[ 2789.344829] (0)[3054:er.ServerThread] set proc[3054] name: ->[Thread-344]
<7>[ 2789.349280] (0)[3054:Thread-344] exit
<3>[ 2789.529722] (1)[WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[ 2789.529748] (1)[WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<3>[ 2789.529926] (1)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[ 2789.529939] (1)[WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 2789.529950] (1)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<4>[ 2789.530207] (0)mtk_get_bus_freq() return 260000
<3>[ 2789.530366] (1)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[ 2789.530379] (1)Flush type = 4 Rx Queue
<3>[ 2789.530555] (1)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[ 2789.530572] (1)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[ 2789.530584] (1)[STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[ 2789.530594] (1)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[ 2789.530606] (1)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<6>[ 2789.530620] (1)[STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[ 2789.530631] (1)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[ 2789.530642] (1)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[ 2789.530653] (1)[STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[ 2789.536301] (0)[WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6628)
<3>[ 2789.541920] (0)[WMT-IC][I]mt6628_ver_check:MT6628: read hw_ver (hw version) (0x8a10)
<3>[ 2789.547534] (0)[WMT-IC][I]mt6628_ver_check:MT6628: read fw_ver (rom version) (0x8a10)
<3>[ 2789.547551] (0)[WMT-IC][I]mt6628_find_wmt_ic_info:found ic info(0x8a10) by full match! index:1
<3>[ 2789.547566] (0)[WMT-IC][I]mt6628_ver_check:MT6628: wmt ic info: MT6628.E2 (0x8a10, WMTHWVER:1, patch_ext:_e2)
<3>[ 2789.547581] (0)[WMT-CORE][I]wmt_core_hw_check:chip id(0x6628) ver_check ok
<3>[ 2789.558780] (1)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[ 2789.558799] (1)[WMT-IC][I]mt6628_sw_init:WMT-CORE: change baudrate(4000000) ok
<3>[ 2789.563927] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(srh_patch) result(0)
<3>[ 2789.563946] (0)[WMT-IC][I]mt6628_patch_dwn:valid patch found: (/system/etc/firmware//mt6628_patch_e2_hdr.bin)
<3>[ 2789.564610] (0)[WMT-IC][I]mt6628_patch_dwn:===========================================
<3>[ 2789.564625] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Built Time = 20120727130622a
<3>[ 2789.564638] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[ 2789.564648] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[ 2789.564659] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Ph Ver = 0x0010
<3>[ 2789.564670] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Platform = 1226
<3>[ 2789.564680] (0)[WMT-IC][I]mt6628_patch_dwn:===========================================
<3>[ 2789.698734] (0)[WMT-IC][I]mt6628_patch_dwn:wmt_core: patch dwn:0 frag(21, 472) ok
<3>[ 2789.699450] (0)[WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf14bcf8)
<3>[ 2789.700447] (0)[WMT-IC][I]mt6628_sw_init:init_coex ok
<6>[ 2789.701201] (0)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[ 2789.701214] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[ 2789.701227] (0)[STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[ 2789.701237] (0)[WMT-IC][I]mt6628_sw_init:enable host STP-UART-FULL mode
<3>[ 2789.721864] (0)[WMT-IC][I]mt6628_sw_init:co-clock disabled.
<3>[ 2789.722782] (1)[WMT-IC][I]mt6628_sw_init:set fm mode (2) ok
<3>[ 2789.722797] (1)[WMT-IC][I]mt6628_sw_init:disable mt662x firmware coredump
<6>[ 2789.722812] (1)[STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[ 2789.722828] (1)[STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[ 2789.722841] (1)mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[ 2789.722849] (1)board_sdio_ctrl force off before on
<6>[ 2789.722857] (1)mtk_wcn_cmb_sdio_off (3)
<5>[ 2789.722978] (1)[Power/clkmgr] [freq_meter] data = 15494, freq = 196 MHz
<5>[ 2789.723082] (1)[Power/clkmgr] [freq_meter] data = 15494, freq = 196 MHz
<6>[ 2789.723101] (1)mtk_wcn_cmb_sdio_on (3)
<5>[ 2789.723213] (1)[Power/clkmgr] [freq_meter] data = 15495, freq = 196 MHz
<3>[ 2789.723231] (1)msdc3 -> USR Resume <- msdc_pm() : L<1716> PID
<3>[ 2789.739935] (0)msdc3 -> ================ <- msdc_set_mclk() : L<976> PID
<3>[ 2789.739955] (0)msdc3 -> !!! Set<400KHz> Source<197000KHz> -> sclk<397KHz> DDR<0> mode<0> div<124> <- msdc_set_mclk() : L<978> PID
<3>[ 2789.739971] (0)msdc3 -> ================ <- msdc_set_mclk() : L<979> PID
<3>[ 2789.765649] (0)msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1786> PID
<3>[ 2789.778821] (0)msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<4110> PID
<3>[ 2789.778856] (0)msdc3 -> ================ <- msdc_set_mclk() : L<976> PID
<3>[ 2789.778873] (0)msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<978> PID
<3>[ 2789.778889] (0)msdc3 -> ================ <- msdc_set_mclk() : L<979> PID
<6>[ 2789.779909] (0)mmc2: new high speed SDIO card at address 0001
<6>[ 2789.781960] (0)[WMT-DFT][I]hif_sdio_probe:start!
<6>[ 2789.781975] (0)[WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x6628) num(0x1)
<6>[ 2789.781986] (0)[WMT-DFT][I]hif_sdio_probe:card->info[0]: 6628
<6>[ 2789.781995] (0)[WMT-DFT][I]hif_sdio_probe:card->info[1]: Combo
<6>[ 2789.782003] (0)[WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[ 2789.782011] (0)[WMT-DFT][I]hif_sdio_probe:card->info[3]:
<6>[ 2789.782125] (0)[WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(524288)
<7>[ 2789.782160] (0)WQ_WARN: cpu:4, proc:kworker/u:1, [mmc_rescan+0x0/0x324]dur: 57842154 > 15ms
<6>[ 2789.879736] (1)[WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[ 2789.879872] (0)[2:kthreadd] fork [3055:kthreadd]
<6>[ 2789.879892] (1)[WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<5>[ 2789.879920] (1)[wlan] net_device prDev(0xc9277000) allocated
<4>[ 2789.880159] (1)[RT_MONITOR]WARNNING [3055:ksdioirqd/mmc2] SET NOT ALLOW RT Prio [1] for proc [3055:ksdioirqd/mmc2]
<5>[ 2789.887681] (1)[wlan] Open FW image: WIFI_RAM_CODE done
<5>[ 2789.892740] (1)[wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[ 2789.892864] (1)[wlan] Virtual Address = e4871000 for COMMON MGMT MEMORY POOL.
<5>[ 2789.892880] (1)[wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[ 2789.892904] (1)[wlan] Virtual Address = e4873000 for SW_RFB_T.
<5>[ 2789.892918] (1)[wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[ 2789.892939] (1)[wlan] Virtual Address = e4877000 for MSDU_INFO_T.
<6>[ 2789.892955] (1)[wlan] wlanAdapterStart(): Acquiring LP-OWN
<6>[ 2789.909775] (1)[wlan] Chip ID: 0x6628
<6>[ 2789.909790] (1)[wlan] Revision ID: 0x0
<7>[ 2790.059822] (0)WQ_WARN: cpu:0, proc:kworker/0:5, [thermal_zone_device_check+0x0/0x18]dur: 310084077 > 15ms
<6>[ 2790.649890] (0)[wlan] wlanAdapterStart(): Waiting for Ready bit..
<6>[ 2790.749805] (0)[wlan] Ready bit asserted
<5>[ 2790.789885] (0)[wlan] RF CAL FAIL = (0),BB CAL FAIL = (0)
<5>[ 2790.790113] (0)[wlan] [wifi] wlan%d netif_carrier_off
<6>[ 2790.790133] (0)[wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[ 2790.790180] (0)[wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[ 2790.790271] (0)[wlan] Domain: map=0, idx=1, code=0x0000
<7>[ 2790.790680] (0)[2:kthreadd] fork [3056:kthreadd]
<5>[ 2790.790728] (0)[wlan] tx_thread starts running...
<6>[ 2790.881590] (0)[WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(6628) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[ 2790.881607] (0)[WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[ 2790.881626] (0)[WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 coredump:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[ 2790.883122] (1)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<3>[ 2790.883161] (1)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<4>[ 2790.883334] (1)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<7>[ 2790.884532] (1)[3053:loadDriverThrea] exit
<6>[ 2790.895949] (0)[RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[ 2790.895974] (0)ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[ 2790.910153] (0)WQ_WARN: cpu:0, proc:kworker/0:5, [wlanSetMulticastListWorkQueue+0x0/0x1f4 [wlan_mt6628]]dur: 15486461 > 15ms
<5>[ 2790.910791] (0)init: starting `wpa_supplicant`
<7>[ 2790.911032] (0)[1:init] fork [3057:init]
<7>[ 2790.912104] (0)[299:WifiStateMachin] fork [3058:WifiStateMachin]
<7>[ 2790.912156] (1)[3058:WifiStateMachin] set proc[3058] name: ->[WifiMonitor]
<7>[ 2790.912735] (1)[3057:init] set proc[3057] name: ->[logwrapper]
<7>[ 2790.930601] (1)[3057:logwrapper] fork [3059:logwrapper]
<7>[ 2790.930633] (1)[3059:logwrapper] set proc[3059] name: ->[logwrapper.bin]
<7>[ 2790.932571] (1)[3059:logwrapper.bin] fork [3060:logwrapper.bin]
<7>[ 2790.940560] (1)[3060:logwrapper.bin] set proc[3060] name: ->[wpa_supplicant]
<5>[ 2791.040377] (0)[wlan] N=0 closed
<5>[ 2791.040409] (0)[wlan] EVENT-ROAMING ABORT: Current Time = 2491010
<5>[ 2791.040425] (0)[wlan] [13] TRANSITION: [0] -> [0]
<6>[ 2791.042083] (0)[wlan] NAF=0,0,0
<6>[ 2791.042102] (0)[wlan] NAF=0,0,0
<5>[ 2791.103625] (0)[Power/Battery] [BATTERY:AVG] BatTemp:25 Vbat:4183 VBatSen:4148 SOC:100 ChrDet:1 Vchrin:4789 Icharging:352 ChrType:1 USBstate:2 gADC_I_SENSE_offset:9
<4>[ 2791.103946] (0)[TestMode] Disable Safty Timer : no UI display
<4>[ 2791.105873] (0)[TestMode] Disable Safty Timer. bat_tt_enable=3, bat_thr_test_mode=0, bat_thr_test_value=0
<5>[ 2791.241967] (0)[wlan] [13] TRANSITION: [0] -> [2]
<5>[ 2791.248477] (1)[Power/Alarm] alarm 0 set 1368302415.440000000
<5>[ 2791.251531] (1)[wlan] CMD set_band=0
<7>[ 2791.367719] (0)[3046:AsyncTask #2] fork [3061:AsyncTask #2]
<7>[ 2791.369758] (0)WQ_WARN: cpu:0, proc:kworker/0:5, [thermal_zone_device_check+0x0/0x18]dur: 309993230 > 15ms
<7>[ 2791.376812] (0)[3061:AsyncTask #2] set proc[3061] name: ->[dmesg]
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IMM76D
ro.build.display.id=ALPS.ICS2.MP.V1.9
ro.build.version.incremental=eng.1355144424
ro.custom.build.version=release.V2.00
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=Mon Dec 10 21:05:12 CST 2012
ro.build.date.utc=1355144712
ro.build.type=user
ro.build.user=user
ro.build.host=qs26
ro.build.tags=test-keys
ro.product.model=5I
ro.product.brand=alps
ro.product.name=qishang77_cu_ics2
ro.product.device=qishang77_cu_ics2
ro.product.board=qishang77_cu_ics2
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=alps
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=qishang77_cu_ics2
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=qishang77_cu_ics2-user 4.0.4 IMM76D eng.1355144424 test-keys
ro.build.fingerprint=alps/qishang77_cu_ics2/qishang77_cu_ics2:4.0.4/IMM76D/1355144424:user/test-keys
ro.build.flavor=
ro.build.characteristics=default
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=ALPS.ICS2.MP.V1.9
ro.mediatek.platform=MT6577
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.ICS2.MP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=128m
# Encrypt phone function
ro.crypto.tmpfs_options=mode=0771,uid=1000,gid=1000
ro.crypto.fs_type=ext4
ro.crypto.fs_real_blkdev=/emmc@usrdata
ro.crypto.fs_mnt_point=/data
ro.crypto.fs_options=noauto_da_alloc
ro.crypto.fs_flags=0x00000406
# USB MTP WHQL
ro.sys.usb.mtp.whql.enable=0
# Power off opt in IPO
sys.ipo.pwrdncap=2
ro.sys.usb.storage.type=mtp,mass_storage
#
# ADDITIONAL_BUILD_PROPERTIES
#
fmradio.driver.chip=3
ro.sf.hwrotation=180
ril.current.share_modem=2
curlockscreen=2
persist.qs.curlockscreen=2
ro.mediatek.gemini_support=true
persist.radio.fd.counter=20
persist.radio.fd.off.counter=20
drm.service.enabled=true
fmradio.driver.enable=1
mediatek.wlan.chip=MT6628
mediatek.wlan.module.postfix=_mt6628
dalvik.vm.mtk-stack-trace-file=/data/anr/mtk_traces.txt
ro.config.ringtone=CaribbeanIce.ogg
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Beep_03.ogg
persist.sys.language=en
persist.sys.country=US
persist.sys.timezone=Asia/Shanghai
persist.qs.uistyle=0
ro.qs.projectname=i5c_77_dr
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
wlan_mt6628 285679 0 - Live 0xbf1ff000 (P)
cfg80211 122048 0 - Live 0xbf1d6000
mtk_fm_priv 2855 0 - Live 0xbf1d2000 (P)
mtk_fm_drv 108963 1 mtk_fm_priv, Live 0xbf1af000
mtk_stp_bt 39986 1 - Live 0xbf1a2000
mtk_stp_gps 37294 0 - Live 0xbf195000
mtk_stp_uart 21589 1 - Live 0xbf18c000 (P)
mtk_stp_wmt 373556 8 wlan_mt6628,mtk_fm_priv,mtk_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf122000 (P)
mtk_hif_sdio 18482 2 wlan_mt6628,mtk_stp_wmt, Live 0xbf119000
devinfo 840 0 - Live 0xbf115000 (P)
devapc 4553 0 - Live 0xbf110000 (P)
sec 90381 0 - Live 0xbf0f3000 (P)
vcodec_kernel_driver 42938 2 - Live 0xbf0e3000 (P)
m4u 114117 28 - Live 0xbf0be000 (P)
ccmni 17150 0 - Live 0xbf0b5000 (P)
ccci 117408 15 ccmni, Live 0xbf08d000 (P)
ccci_plat 127174 2 ccmni,ccci, Live 0xbf064000 (P)
mtk_drvb_77 6081 0 - Live 0xbf05f000 (P)
mtklfb 23574 0 - Live 0xbf055000
pvrsrvkm 233143 103 mtklfb, Live 0xbf00e000
mtk_hwe 1386 0 - Live 0xbf00a000 (P)
aed 16392 3 - Live 0xbf000000 (P)
RAM: 512 MB (483 MB available)
System RAM: 483.000MB
mtkfb.0: 7.000MB
Flash: 4 GB (3.589 GB actual); 16 GB (14.837 GB actual)
mmcblk0: 3.589 GB
mmcblk1: 14.837 GB
Pantalla táctil para alps 5I
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
Batería de repuesto para alps 5I
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm
$5.42 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$52.63 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
$154 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
Fundas para alps 5I
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
Find Similar devices | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |