- General
- Detalles OS
- CPU info
- GPU extensiones
- Mensajes del kernel WiFi
- build.prop
- Módulos
- Mapa de la memoria
Especificaciones generales | |
---|---|
Marca | alps |
Modelo | Ginzzu R8 Dual |
Versión de Android | 4.0.4; eng.hedy.1378881410; SDK15 |
CPU | 1 core; ARMv7 Processor rev 10 (v7l); Max: 1001,0 MHz; Min: 166,8 MHz |
Pantalla | 480 x 320; DPI: 160; Evaluated Size: 3,6" |
Pantalla táctil | Multitouch 5 points |
GPU | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.8@789263 |
RAM | 512 MB (488 MB available) |
Flash | 16 GB (14.817 GB actual); 0.5 GB (0.454 GB actual) (ver pestaña de mapa de memoria) |
Comunicaciones | |
Teléfono | GSM, Dual SIM; Net: HSDPA |
WiFi | wlan_mt6628; IEEE 802.11 b/g/n; MediaTek MT6628; AP Mode |
USB Host | No |
Bluetooth | Bluetooth 3.0+HS, 4.0 |
GPS | Yes |
Funciones avanzadas | |
Cámara frontal | Photo: 4.9 MP; Max: 2560x1920; Focus: infinity; Flash modes: on off torch |
Cámara trasera | Photo: 1.9 MP; Max size: 1600x1200; Focus: infinity; No flash |
Sensores | BMM050 Magnetic Field sensor (Bosch); range: 0...1600; resolution: 0,3 (0,019%); power: 0,5mA; |
BMA250 3-axis Accelerometer (Bosch); range: 0...39,22; resolution: 0,038 (0,098%); power: 0,03mA; | |
tmd2771 Proximity Sensor (Capella); range: 0...1; resolution: 1 (100%); power: 0,13mA; | |
tmd2771 Light Sensor (Capella); range: 0...10240; resolution: 1 (0,01%); power: 0,13mA; | |
Alarma vibrante | Yes |
Idiomas soportados | 43; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
Batería | Technology: Li-ion; Voltage: 3885 |
FM radio | Supported by chipset |
Owner's comment: | Ginzzu R8 Dual |
SD Version: | 1.1 5 |
KERNEL: Linux version 3.0.13 (hedy@hedy) (gcc version 4.4.3 (GCC) ) #1 PREEMPT Wed Sep 11 14:36:39 CST 2013
CODENAME: REL
Mainboard: s812a_v8
BRAND: alps
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: s812a_v8
DISPLAY: ALPS.ICS.MP.V2.11
FINGERPRINT: alps/s812a_v8/s812a_v8:4.0.4/IMM76D/1378881410:user/test-keys
HARDWARE: mt6575
ID: IMM76D
TAGS: test-keys
Processor : ARMv7 Processor rev 10 (v7l)
BogoMIPS : 1993.93
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc09
CPU revision : 10
Hardware : MT6575
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<7>[81026.216868] [12283:dmesg] exit
<7>[81026.217029] [12283:dmesg] sig 17 to [12274:AsyncTask #3]
<7>[81026.241410] [293:WifiStateMachin] fork err at pid
<7>[81026.241433] [293:WifiStateMachin] fork [12284:WifiStateMachin]
<6>[81026.242408] [ALS/PS] cm36283_als_operate
<3>[81026.242418] [ALS/PS] cm36283_als_operate 1539 : cm36283 als get data command!
<6>[81026.243298] [ALS/PS] cm36283_read_als
<3>[81026.243817] [ALS/PS] CM36283_REG_ALS_DATA value value_low = 2, value_high = 0
<7>[81026.247255] [12284:WifiStateMachin] set proc[12284] name: ->[loadDriverThrea]
<6>[81026.276240] [WLAN] rfkill_set_block(blocked 0)
<6>[81026.276250] [WLAN] Power on
<3>[81026.276262] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<4>[81026.277046] [STP-PSM] [I]_stp_psm_is_redundant_active_op: redundant opId found, opId(1), preOpid(1)
<4>[81026.278199] mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[81026.278871] board_sdio_ctrl force off before on
<6>[81026.278877] mtk_wcn_cmb_sdio_off (3)
<6>[81026.278969] mtk_wcn_cmb_sdio_on (3)
<3>[81026.279053] msdc3 -> USR Resume <- msdc_pm() : L<1437> PID
<7>[81026.284577] [252:er.ServerThread] fork err at pid
<7>[81026.284601] [252:er.ServerThread] fork [12285:er.ServerThread]
<7>[81026.286629] [12285:er.ServerThread] set proc[12285] name: ->[Thread-1184]
<7>[81026.288190] [12285:Thread-1184] exit
<3>[81026.301155] msdc3 -> ================ <- msdc_set_mclk() : L<756> PID
<3>[81026.302184] msdc3 -> !!! Set<400KHz> Source<197000KHz> -> sclk<397KHz> DDR<0> mode<0> div<124> <- msdc_set_mclk() : L<758> PID
<3>[81026.303826] msdc3 -> ================ <- msdc_set_mclk() : L<759> PID
<6>[81026.305549] [ALS/PS] cm36283_als_operate
<3>[81026.305557] [ALS/PS] cm36283_als_operate 1539 : cm36283 als get data command!
<6>[81026.306435] [ALS/PS] cm36283_read_als
<3>[81026.306940] [ALS/PS] CM36283_REG_ALS_DATA value value_low = 4, value_high = 0
<3>[81026.329598] msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1497> PID
<3>[81026.343897] msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<3422> PID
<3>[81026.345064] msdc3 -> ================ <- msdc_set_mclk() : L<756> PID
<3>[81026.346089] msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<758> PID
<3>[81026.347753] msdc3 -> ================ <- msdc_set_mclk() : L<759> PID
<6>[81026.357534] mmc1: new high speed SDIO card at address 0001
<7>[81026.359207] [2:kthreadd] fork err at pid
<7>[81026.359231] [2:kthreadd] fork [12286:kthreadd]
<6>[81026.361757] [WMT-DFT][I]hif_sdio_probe:start!
<6>[81026.361773] [WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x6628) num(0x1)
<6>[81026.361784] [WMT-DFT][I]hif_sdio_probe:card->info[0]: 6628
<6>[81026.361791] [WMT-DFT][I]hif_sdio_probe:card->info[1]: Combo
<6>[81026.361799] [WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[81026.361806] [WMT-DFT][I]hif_sdio_probe:card->info[3]:
<6>[81026.362013] [ALS/PS] cm36283_als_operate
<3>[81026.362021] [ALS/PS] cm36283_als_operate 1539 : cm36283 als get data command!
<6>[81026.362901] [ALS/PS] cm36283_read_als
<3>[81026.363455] [ALS/PS] CM36283_REG_ALS_DATA value value_low = 2, value_high = 0
<6>[81026.366138] [WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(520192)
<7>[81026.366171] WQ_WARN: cpu:1, proc:kworker/u:1, dur: 85512769 > 8ms
<7>[81026.366192] work: mmc_rescan+0x0/0x370
<7>[81026.380088] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 15258770 > 8ms
<7>[81026.380124] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[81026.400889] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 18224692 > 8ms
<7>[81026.400950] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[81026.421672] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 17847077 > 8ms
<7>[81026.421703] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<6>[81026.421850] [ALS/PS] cm36283_als_operate
<3>[81026.421859] [ALS/PS] cm36283_als_operate 1539 : cm36283 als get data command!
<6>[81026.422740] [ALS/PS] cm36283_read_als
<3>[81026.423248] [ALS/PS] CM36283_REG_ALS_DATA value value_low = 4, value_high = 0
<6>[81026.430943] [WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[81026.431040] [2:kthreadd] fork err at pid
<7>[81026.431062] [2:kthreadd] fork [12287:kthreadd]
<6>[81026.431085] [WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<5>[81026.431115] [wlan] net_device prDev(0xc929f000) allocated
<5>[81026.432740] [wlan] Open FW image: WIFI_RAM_CODE done
<5>[81026.433724] [wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[81026.434540] [wlan] Virtual Address = dfb01000 for COMMON MGMT MEMORY POOL.
<5>[81026.435383] [wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[81026.436039] [wlan] Virtual Address = dfb03000 for SW_RFB_T.
<5>[81026.436726] [wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[81026.437414] [wlan] Virtual Address = dfb07000 for MSDU_INFO_T.
<6>[81026.438135] [wlan] wlanAdapterStart(): Acquiring LP-OWN
<4>[81026.438190] [RT_MONITOR]WARNNING [12287:ksdioirqd/mmc1] SET NOT ALLOW RT Prio [1] for proc [12287:ksdioirqd/mmc1]
<4>[81026.439460] Backtrace:
<4>[81026.439785] [
<4>[81026.440827] r7:00000001 r6:00000000 r5:ce5c2000 r4:c4531800
<4>[81026.441596] [
<7>[81026.442785] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 17489923 > 8ms
<7>[81026.442812] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<4>[81026.443098] [
<4>[81026.444306] [
<4>[81026.448736] [
<4>[81026.449771] [
<4>[81026.450754] r7:00000013 r6:c0089d54 r5:c00a13d4 r4:dd3a9d70
<6>[81026.461012] [wlan] Chip ID: 0x6628
<6>[81026.461022] [wlan] Revision ID: 0x0
<7>[81026.463585] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 15359923 > 8ms
<7>[81026.463622] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<6>[81026.481852] [ALS/PS] cm36283_als_operate
<3>[81026.481862] [ALS/PS] cm36283_als_operate 1539 : cm36283 als get data command!
<6>[81026.482750] [ALS/PS] cm36283_read_als
<3>[81026.483254] [ALS/PS] CM36283_REG_ALS_DATA value value_low = 4, value_high = 0
<7>[81026.484417] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 17636769 > 8ms
<7>[81026.484447] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[81026.505195] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 17577923 > 8ms
<7>[81026.505225] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[81026.525979] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 16186154 > 8ms
<7>[81026.526017] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<6>[81026.541844] [ALS/PS] cm36283_als_operate
<3>[81026.541854] [ALS/PS] cm36283_als_operate 1539 : cm36283 als get data command!
<6>[81026.542746] [ALS/PS] cm36283_read_als
<3>[81026.543257] [ALS/PS] CM36283_REG_ALS_DATA value value_low = 4, value_high = 0
<7>[81026.546764] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 16254308 > 8ms
<7>[81026.546794] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[81026.567544] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 17606384 > 8ms
<7>[81026.567574] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[81026.588318] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 17641462 > 8ms
<7>[81026.588355] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<6>[81026.601851] [ALS/PS] cm36283_als_operate
<3>[81026.601862] [ALS/PS] cm36283_als_operate 1539 : cm36283 als get data command!
<6>[81026.602742] [ALS/PS] cm36283_read_als
<3>[81026.603250] [ALS/PS] CM36283_REG_ALS_DATA value value_low = 4, value_high = 0
<7>[81026.609110] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 18084615 > 8ms
<7>[81026.609140] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[81026.629890] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 16110154 > 8ms
<7>[81026.629919] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[81026.650677] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 17622461 > 8ms
<7>[81026.650707] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<6>[81026.661869] [ALS/PS] cm36283_als_operate
<3>[81026.661879] [ALS/PS] cm36283_als_operate 1539 : cm36283 als get data command!
<6>[81026.662759] [ALS/PS] cm36283_read_als
<3>[81026.663263] [ALS/PS] CM36283_REG_ALS_DATA value value_low = 4, value_high = 0
<7>[81026.671458] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 17648923 > 8ms
<7>[81026.671488] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[81026.692239] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 17696846 > 8ms
<7>[81026.692269] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[81026.713020] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 17916000 > 8ms
<7>[81026.713052] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<6>[81026.721848] [ALS/PS] cm36283_als_operate
<3>[81026.721859] [ALS/PS] cm36283_als_operate 1539 : cm36283 als get data command!
<6>[81026.722739] [ALS/PS] cm36283_read_als
<3>[81026.723252] [ALS/PS] CM36283_REG_ALS_DATA value value_low = 4, value_high = 0
<7>[81026.733802] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 18059231 > 8ms
<7>[81026.733832] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[81026.754587] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 19043923 > 8ms
<7>[81026.754617] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[81026.775349] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 19033385 > 8ms
<7>[81026.775379] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<6>[81026.781853] [ALS/PS] cm36283_als_operate
<3>[81026.781863] [ALS/PS] cm36283_als_operate 1539 : cm36283 als get data command!
<6>[81026.782744] [ALS/PS] cm36283_read_als
<3>[81026.783248] [ALS/PS] CM36283_REG_ALS_DATA value value_low = 4, value_high = 0
<7>[81026.796154] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 15687154 > 8ms
<7>[81026.796182] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<6>[81026.841838] [ALS/PS] cm36283_als_operate
<3>[81026.841848] [ALS/PS] cm36283_als_operate 1539 : cm36283 als get data command!
<6>[81026.842742] [ALS/PS] cm36283_read_als
<3>[81026.844324] [ALS/PS] CM36283_REG_ALS_DATA value value_low = 4, value_high = 0
<5>[81026.900946] yaffs: yaffs: userdata sync do_checkpoint 0,gc_urgent 0
<5>[81026.901726] yaffs: yaffs: userdata yaffs_FlushSuperBlock 0
<6>[81026.903617] [ALS/PS] cm36283_als_operate
<3>[81026.903627] [ALS/PS] cm36283_als_operate 1539 : cm36283 als get data command!
<6>[81026.904506] [ALS/PS] cm36283_read_als
<3>[81026.905011] [ALS/PS] CM36283_REG_ALS_DATA value value_low = 2, value_high = 0
<6>[81026.961855] [ALS/PS] cm36283_als_operate
<3>[81026.961865] [ALS/PS] cm36283_als_operate 1539 : cm36283 als get data command!
<6>[81026.962745] [ALS/PS] cm36283_read_als
<3>[81026.963253] [ALS/PS] CM36283_REG_ALS_DATA value value_low = 4, value_high = 0
<6>[81027.021850] [ALS/PS] cm36283_als_operate
<3>[81027.021860] [ALS/PS] cm36283_als_operate 1539 : cm36283 als get data command!
<6>[81027.022740] [ALS/PS] cm36283_read_als
<3>[81027.023244] [ALS/PS] CM36283_REG_ALS_DATA value value_low = 4, value_high = 0
<6>[81027.081951] [ALS/PS] cm36283_als_operate
<3>[81027.081962] [ALS/PS] cm36283_als_operate 1539 : cm36283 als get data command!
<6>[81027.082856] [ALS/PS] cm36283_read_als
<3>[81027.083373] [ALS/PS] CM36283_REG_ALS_DATA value value_low = 2, value_high = 0
<7>[81027.093474] [12141:Smack Packet Wr] exit
<6>[81027.141835] [ALS/PS] cm36283_als_operate
<3>[81027.141844] [ALS/PS] cm36283_als_operate 1539 : cm36283 als get data command!
<6>[81027.142724] [ALS/PS] cm36283_read_als
<3>[81027.143235] [ALS/PS] CM36283_REG_ALS_DATA value value_low = 2, value_high = 0
<6>[81027.201846] [ALS/PS] cm36283_als_operate
<3>[81027.201856] [ALS/PS] cm36283_als_operate 1539 : cm36283 als get data command!
<6>[81027.202736] [ALS/PS] cm36283_read_als
<3>[81027.203241] [ALS/PS] CM36283_REG_ALS_DATA value value_low = 2, value_high = 0
<6>[81027.205638] [wlan] wlanAdapterStart(): Waiting for Ready bit..
<6>[81027.220998] [wlan] Ready bit asserted
<6>[81027.261849] [ALS/PS] cm36283_als_operate
<3>[81027.261859] [ALS/PS] cm36283_als_operate 1539 : cm36283 als get data command!
<6>[81027.262739] [ALS/PS] cm36283_read_als
<3>[81027.263243] [ALS/PS] CM36283_REG_ALS_DATA value value_low = 4, value_high = 0
<5>[81027.265606] [wlan] RF CAL FAIL = (0),BB CAL FAIL = (0)
<5>[81027.268277] [wlan] [wifi] wlan%d netif_carrier_off
<6>[81027.268868] [wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[81027.268936] [wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[81027.269026] [wlan] Domain: map=0, idx=0, code=0x0000
<7>[81027.269913] [2:kthreadd] fork err at pid
<7>[81027.269935] [2:kthreadd] fork [12288:kthreadd]
<5>[81027.269967] [wlan] tx_thread starts running...
<6>[81027.272160] [WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(6628) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[81027.272174] [WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[81027.272191] [WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:2 f:0 g:0 w:2 lpbk:0 coredump:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[81027.273643] [STP-PSM] [I]_stp_psm_is_redundant_active_op: redundant opId found, opId(1), preOpid(1)
<3>[81027.274777] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<7>[81027.281916] [12284:loadDriverThrea] exit
<7>[81027.294179] [8169:kworker/u:0] fork err at pid
<7>[81027.294204] [8169:kworker/u:0] fork [12289:kworker/u:0]
<7>[81027.294516] [12289:kworker/u:0] fork err at pid
<7>[81027.294535] [12289:kworker/u:0] fork [12290:kworker/u:0]
<7>[81027.294577] [12290:kworker/u:0] exit
<7>[81027.294603] [12290:kworker/u:0] sig 17 to [12289:kworker/u:0]
<7>[81027.294635] [12289:kworker/u:0] exit
<6>[81027.295114] [RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[81027.295136] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[81027.311497] [1:init] fork err at pid
<7>[81027.311520] [1:init] fork [12291:init]
<7>[81027.312426] [293:WifiStateMachin] fork err at pid
<7>[81027.312450] [293:WifiStateMachin] fork [12292:WifiStateMachin]
<7>[81027.312758] WQ_WARN: cpu:0, proc:kworker/0:4, dur: 17539692 > 8ms
<7>[81027.312828] work: wlanSetMulticastListWorkQueue+0x0/0x1f4 [wlan_mt6628]
<7>[81027.312917] [12292:WifiStateMachin] set proc[12292] name: ->[WifiMonitor]
<7>[81027.319088] [12291:init] set proc[12291] name: ->[logwrapper]
<7>[81027.321655] [12291:logwrapper] fork err at pid
<7>[81027.321680] [12291:logwrapper] fork [12293:logwrapper]
<6>[81027.321899] [ALS/PS] cm36283_als_operate
<3>[81027.321908] [ALS/PS] cm36283_als_operate 1539 : cm36283 als get data command!
<6>[81027.322787] [ALS/PS] cm36283_read_als
<3>[81027.323318] [ALS/PS] CM36283_REG_ALS_DATA value value_low = 2, value_high = 0
<7>[81027.324715] [12293:logwrapper] set proc[12293] name: ->[wpa_supplicant]
<6>[81027.381917] [ALS/PS] cm36283_als_operate
<3>[81027.381927] [ALS/PS] cm36283_als_operate 1539 : cm36283 als get data command!
<6>[81027.382824] [ALS/PS] cm36283_read_als
<3>[81027.384273] [ALS/PS] CM36283_REG_ALS_DATA value value_low = 2, value_high = 0
<5>[81027.401197] [wlan] N=0 closed
<5>[81027.401564] [wlan] EVENT-ROAMING ABORT: Current Time = 56796510
<5>[81027.402345] [wlan] [13] TRANSITION: [0] -> [0]
<6>[81027.404933] [wlan] NAF=0,0,0
<6>[81027.404947] [wlan] NAF=0,0,0
<6>[81027.441857] [ALS/PS] cm36283_als_operate
<3>[81027.441867] [ALS/PS] cm36283_als_operate 1539 : cm36283 als get data command!
<6>[81027.442747] [ALS/PS] cm36283_read_als
<3>[81027.443253] [ALS/PS] CM36283_REG_ALS_DATA value value_low = 4, value_high = 0
<6>[81027.501856] [ALS/PS] cm36283_als_operate
<3>[81027.501866] [ALS/PS] cm36283_als_operate 1539 : cm36283 als get data command!
<6>[81027.502746] [ALS/PS] cm36283_read_als
<3>[81027.503252] [ALS/PS] CM36283_REG_ALS_DATA value value_low = 4, value_high = 0
<5>[81027.522123] [wlan] [13] TRANSITION: [0] -> [2]
<6>[81027.562013] [ALS/PS] cm36283_als_operate
<3>[81027.562046] [ALS/PS] cm36283_als_operate 1539 : cm36283 als get data command!
<6>[81027.562952] [ALS/PS] cm36283_read_als
<3>[81027.563533] [ALS/PS] CM36283_REG_ALS_DATA value value_low = 4, value_high = 0
<6>[81027.622105] [ALS/PS] cm36283_als_operate
<3>[81027.622138] [ALS/PS] cm36283_als_operate 1539 : cm36283 als get data command!
<6>[81027.623082] [ALS/PS] cm36283_read_als
<3>[81027.625008] [ALS/PS] CM36283_REG_ALS_DATA value value_low = 4, value_high = 0
<7>[81027.629453] WQ_WARN: cpu:0, proc:kworker/0:4, dur: 8405308 > 8ms
<7>[81027.629512] work: hwmsen_work_func+0x0/0x47c
<6>[81027.682340] [ALS/PS] cm36283_als_operate
<3>[81027.682373] [ALS/PS] cm36283_als_operate 1539 : cm36283 als get data command!
<6>[81027.683314] [ALS/PS] cm36283_read_als
<3>[81027.684142] [ALS/PS] CM36283_REG_ALS_DATA value value_low = 2, value_high = 0
<6>[81027.742071] [ALS/PS] cm36283_als_operate
<3>[81027.742104] [ALS/PS] cm36283_als_operate 1539 : cm36283 als get data command!
<6>[81027.743010] [ALS/PS] cm36283_read_als
<3>[81027.743595] [ALS/PS] CM36283_REG_ALS_DATA value value_low = 2, value_high = 0
<5>[81027.789258] [wlan] CMD set_band=0
<7>[81027.801315] [12274:AsyncTask #3] fork err at pid
<7>[81027.801343] [12274:AsyncTask #3] fork [12294:AsyncTask #3]
<6>[81027.801928] [ALS/PS] cm36283_als_operate
<3>[81027.801938] [ALS/PS] cm36283_als_operate 1539 : cm36283 als get data command!
<6>[81027.802818] [ALS/PS] cm36283_read_als
<3>[81027.803333] [ALS/PS] CM36283_REG_ALS_DATA value value_low = 4, value_high = 0
<7>[81027.809876] [12294:AsyncTask #3] set proc[12294] name: ->[dmesg]
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IMM76D
ro.build.display.id=ALPS.ICS.MP.V2.11
ro.build.version.incremental=eng.hedy.1378881410
ro.custom.build.version=1378881410
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=Wed Sep 11 14:38:13 CST 2013
ro.build.date.utc=1378881493
ro.build.type=user
ro.build.user=hedy
ro.build.host=hedy
ro.build.tags=test-keys
ro.product.version=Ginzzu R8 Dual.1.001.765.A404.WW.BA
ro.product.model=Ginzzu R8 Dual
ro.product.brand=alps
ro.product.name=s812a_v8
ro.product.device=s812a_v8
ro.product.board=s812a_v8
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=alps
ro.product.locale.language=ru
ro.product.locale.region=RU
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=s812a_v8
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=s812a_v8-user 4.0.4 IMM76D eng.hedy.1378881410 test-keys
ro.build.fingerprint=alps/s812a_v8/s812a_v8:4.0.4/IMM76D/1378881410:user/test-keys
ro.build.flavor=
ro.build.characteristics=default
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=ALPS.ICS.MP.V2.11
ro.mediatek.platform=MT6575
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.ICS.MP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=128m
# Encrypt phone function
ro.crypto.tmpfs_options=mode=0771,uid=1000,gid=1000
ro.crypto.fs_type=ext4
ro.crypto.fs_real_blkdev=/emmc@usrdata
ro.crypto.fs_mnt_point=/data
ro.crypto.fs_options=noauto_da_alloc
ro.crypto.fs_flags=0x00000406
# audio
ro.camera.sound.forced=0
ro.audio.silent=0
# USB Config Type
ro.sys.usb.storage.type=mtp,mass_storage
# USB BICR function
ro.sys.usb.bicr=yes
#
# ADDITIONAL_BUILD_PROPERTIES
#
gps.solution.combo.chip=1
fmradio.driver.chip=3
ro.sf.hwrotation=0
ril.current.share_modem=2
curlockscreen=2
ro.mediatek.gemini_support=true
drm.service.enabled=true
fmradio.driver.enable=1
persist.radio.fd.counter=20
persist.radio.fd.off.counter=20
mediatek.wlan.chip=MT6628
mediatek.wlan.module.postfix=_mt6628
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.config.ringtone=Backroad.ogg
ro.setupwizard.mode=DISABLED
ro.hedy.custom.product=s812a_v8
ro.hedy.internal.product=Ginzzu_R8_Dual
persist.sys.timezone=Europe/Moscow
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
wlan_mt6628 285119 0 - Live 0xbf1d8000 (P)
cfg80211 122425 0 - Live 0xbf1af000
mtk_fm_priv 2391 0 - Live 0xbf1ab000 (P)
mtk_fm_drv 98153 1 mtk_fm_priv, Live 0xbf18c000
mtk_stp_bt 39942 1 - Live 0xbf17f000
mtk_stp_gps 37190 0 - Live 0xbf172000
mtk_stp_uart 21577 1 - Live 0xbf169000 (P)
mtk_stp_wmt 369735 7 wlan_mt6628,mtk_fm_priv,mtk_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf100000 (P)
mtk_hif_sdio 18186 2 wlan_mt6628,mtk_stp_wmt, Live 0xbf0f7000
devinfo 756 0 - Live 0xbf0f3000 (P)
sec 109563 0 - Live 0xbf0d2000 (P)
mt6575_vcodec_kernel_driver 23817 2 - Live 0xbf0c7000 (P)
mt6575_m4u 109842 28 - Live 0xbf0a3000 (P)
ccmni 17214 0 - Live 0xbf09a000 (P)
ccci 140552 15 ccmni, Live 0xbf06c000 (P)
ccci_plat 125364 3 sec,ccmni,ccci, Live 0xbf045000 (P)
mtk_drvb 5115 0 - Live 0xbf040000 (P)
mtklfb 14369 0 - Live 0xbf038000
pvrsrvkm 163655 79 mtklfb, Live 0xbf004000
alps_core 2221 0 - Live 0xbf000000 (P)
RAM: 512 MB (488 MB available)
System RAM: 488.000MB
mtkfb.0: 2.000MB
Flash: 16 GB (14.817 GB actual); 0.5 GB (0.454 GB actual)
mmcblk0: 14.817 GB
mtdblock: 0.025 GB
mtdblock1: 0.454 GB
Pantalla táctil para alps Ginzzu R8 Dual
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
Batería de repuesto para alps Ginzzu R8 Dual
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
Fundas para alps Ginzzu R8 Dual
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
Find Similar devices | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |