1. Install SpecDevice
2. Run and decode your specs
3. Get your link (read more...)
General Specifications | |
---|---|
Manufacturer | Samsung GT-N7100 |
Model | GT-N7100 |
Firmware | 4.1.1; eng.scm.1366102946; SDK10 |
CPU | 2 cores; ARMv7 Processor rev 10 (v7l) MT75R2_K2-A_V3 |
Display | 854 x 480; DPI: 240; Evaluated Size: 4.1" |
Touch screen | Multitouch 2 points |
GPU | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.7@276259 |
RAM | 256 MB (242 MB available) |
Flash | 8 GB (7.402 GB actual); 0.5 GB (0.454 GB actual) (see memory map tab) |
Communications | |
Phone | GSM, Dual SIM |
WiFi | lca_core; IEEE 802.11 b/g/n; MediaTek MT6628; AP Mode |
USB Host | No |
Bluetooth | Bluetooth 3.0+HS, 4.0 |
GPS | Yes |
Advanced Features | |
Front camera | Photo: 8.0 MP; Max: 3264x2448; Focus: infinity; Flash modes: auto on off torch |
Back camera | Photo: 0.3 MP; Max size: 640x480; Focus: infinity; No flash |
Sensors | AMI304 3-axis Magnetic Field sensor (Aichi Steel); range: 0...600; resolution: 0.002 (0%); power: 0.25mA; |
ADXL345 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0.004 (0.012%); power: 0.13mA; | |
CM3623 Proximity Sensor (Capella); range: 0...1; resolution: 1 (100%); power: 0.13mA; | |
CM3623 Light Sensor (Capella); range: 0...10240; resolution: 1 (0.01%); power: 0.13mA; | |
MPU3000 gyroscope Sensor (Invensensor); range: 0...34.91; resolution: 0.011 (0.031%); power: 6.1mA; | |
Gravity Sensor (Google Inc.); range: 0...32; resolution: 0.004 (0.012%); power: 0.13mA; | |
Linear Acceleration Sensor (Google Inc.); range: 0...32; resolution: 0.004 (0.012%); power: 0.13mA; | |
Rotation Vector Sensor (Google Inc.); range: 0...1; resolution: 0 (0%); power: 0.38mA; | |
Vibrator | Yes |
Supported languages | 41; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Portuguese; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
Battery | Technology: Li-ion; Voltage: 4187 |
FM radio | Supported by chipset |
Owner's comment: | crap |
SD Version: | 1.1 5 |
KERNEL: Linux version 2.6.35.7 (user@linux-user) (gcc version 4.4.3 (GCC) ) #1 PREEMPT Tue Apr 16 17:02:10 CST 2013
CODENAME: REL
Mainboard: K2-A
BRAND: Samsung
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: K2-A
DISPLAY: GT-N7100 20130416-170452
FINGERPRINT: Samsung/K2-A/K2-A:4.1.1/GRK39F/1366102946:user/test-keys
HARDWARE: mt6575
ID: GRK39F
TAGS: test-keys
Processor : ARMv7 Processor rev 10 (v7l)
BogoMIPS : 1024.00
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc09
CPU revision : 10
Hardware : MT6517
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_stream2
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<7>[ 3259.369118] [97:zygote] fork [2422:zygote]
<7>[ 3259.372006] [2422:zygote] fork [2423:zygote]
<7>[ 3259.372117] [2423:zygote] set proc[2423] name: -> [HeapWorker]
<7>[ 3259.372937] [2422:zygote] fork [2424:zygote]
<7>[ 3259.373419] [2424:zygote] set proc[2424] name: -> [GC]
<7>[ 3259.373705] [2422:zygote] fork [2425:zygote]
<7>[ 3259.373971] [2425:zygote] set proc[2425] name: -> [Signal Catcher]
<7>[ 3259.374263] [2422:zygote] fork [2426:zygote]
<7>[ 3259.375882] [2426:zygote] set proc[2426] name: -> [Compiler]
<7>[ 3259.381542] [2422:zygote] fork [2427:zygote]
<7>[ 3259.384443] [2422:zygote] set proc[2422] name: -> [re-initialized>]
<7>[ 3259.386675] [2269:Smack Packet Ha] exit
<7>[ 3259.387329] [2427:zygote] set proc[2427] name: -> [BinderThd_AP242]
<7>[ 3259.387573] [2427:BinderThd_AP242] fork [2428:BinderThd_AP242]
<7>[ 3259.387630] [2428:BinderThd_AP242] set proc[2428] name: -> [BinderThd_AP242]
<5>[ 3259.402124] [Power/Alarm] alarm 2 set 3287.016000000
<7>[ 3259.402765] [2422:re-initialized>] set proc[2422] name: -> [d.apps.uploader]
<7>[ 3259.441057] [2422:d.apps.uploader] fork [2429:d.apps.uploader]
<7>[ 3259.441364] [2429:d.apps.uploader] set proc[2429] name: -> [RefQueueWorker@]
<7>[ 3259.443748] [2422:d.apps.uploader] fork [2430:d.apps.uploader]
<7>[ 3259.444061] [2430:d.apps.uploader] set proc[2430] name: -> [Thread-10]
<7>[ 3259.466946] [1536:GTalkConnWorker] fork [2431:GTalkConnWorker]
<7>[ 3259.470228] [2431:GTalkConnWorker] set proc[2431] name: -> [close-XMPP-conn]
<7>[ 3259.484643] [2413:dmesg] exit
<7>[ 3259.484797] [2413:dmesg] sig 17 to [2388:AsyncTask #2]
<7>[ 3259.551730] [2267:Smack Packet Wr] sig 13 to [2267:Smack Packet Wr]
<7>[ 3259.551947] [2267:Smack Packet Wr] sig 13 to [2267:Smack Packet Wr]
<7>[ 3259.552372] [2267:Smack Packet Wr] exit
<5>[ 3259.598443] [wlan] unregisterdev(0xc32df000)
<6>[ 3259.598526] [WMT-DFT][I]hif_sdio_wifi_off:ok!
<7>[ 3259.598587] [2146:ksdioirqd/mmc1] exit
<6>[ 3259.599323] [WMT-DFT][I]hif_sdio_wifi_off:sdio_release_irq() for wifi ok
<4>[ 3259.599345] mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[ 3259.599354] mtk_wcn_cmb_sdio_off (3)
<3>[ 3259.599365] msdc3 -> USR Suspend <- msdc_pm() : L<1208> PID
<6>[ 3259.599424] [WMT-DFT][I]hif_sdio_remove:start!
<6>[ 3259.599484] [WMT-DFT][I]hif_sdio_remove:sdio func(0xc70715e0) is removed successfully!
<6>[ 3259.599582] mmc1: card 0001 removed
<3>[ 3259.618462] msdc3 -> save latch data<1> cmd<1> <- msdc_ops_set_ios() : L<2983> PID
<3>[ 3259.618482] msdc3 -> set mclk to 0 <- msdc_set_mclk() : L<646> PID
<3>[ 3259.618670] [WMT-CORE][I]opfunc_func_off:WMT-CORE:Fun(3) [POWER_OFF] and power down chip
<4>[ 3259.618697] [STP-PSM] [I]_stp_psm_is_redundant_active_op: redundant opId found, opId(1), preOpid(1)
<6>[ 3259.618722] [STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[ 3259.618735] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[ 3259.618748] [STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[ 3259.618756] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(1)
<4>[ 3259.618771] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[ 3259.618783] Flush type = 4 Rx Queue
<7>[ 3259.672450] [2268:Smack Packet Re] exit
<3>[ 3259.678930] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(close_stp) result(0)
<3>[ 3259.678948] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, hw_pwr_off start
<3>[ 3259.678960] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, BGF_EINT IRQ unregistered and disabled
<3>[ 3259.678975] [WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 3259.678985] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, ALL_EINT IRQ unregistered and disabled
<3>[ 3259.678996] [WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 3259.679008] [WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[ 3259.679020] [WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<3>[ 3259.679032] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[ 3259.679041] [WMT-PLAT][W]wmt_plat_gps_lna_ctrl:host gps lna pin not defined!!!
<3>[ 3259.679051] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, hw_pwr_off finish
<3>[ 3259.679061] [WMT-CORE][W]opfunc_pwr_off:HW_PWR_OFF ok
<3>[ 3259.679075] [WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC OFF]status(b:0 f:0 g:0 w:0 lpbk:0 coredump:0 wmt:0 sd1:0 sd2:0 stp:0)
<6>[ 3259.679108] [STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[ 3259.679128] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(4) type(3) ok
<7>[ 3259.690940] [5:khelper] fork [2432:khelper]
<7>[ 3259.698392] [2432:khelper] fork [2433:khelper]
<7>[ 3259.701221] [2433:khelper] exit
<7>[ 3259.701258] [2433:khelper] sig 17 to [2432:khelper]
<7>[ 3259.701319] [2432:khelper] exit
<7>[ 3259.701516] [5:khelper] fork [2434:khelper]
<7>[ 3259.707053] [2434:khelper] fork [2435:khelper]
<7>[ 3259.712127] [214:er.ServerThread] fork [2436:er.ServerThread]
<6>[ 3259.716844] [WLAN] rfkill_set_block(blocked 0)
<6>[ 3259.716855] [WLAN] Power on
<3>[ 3259.716872] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[ 3259.716891] [STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[ 3259.717247] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[ 3259.717261] [WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(not defined)
<3>[ 3259.717270] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO185)
<3>[ 3259.717279] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(not defined)
<3>[ 3259.717288] [WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[ 3259.717297] [WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO13)
<3>[ 3259.717306] [WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(14)
<3>[ 3259.717315] [WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO15)
<3>[ 3259.717324] [WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(18)
<3>[ 3259.717333] [WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<3>[ 3259.717342] [WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[ 3259.717351] [WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[ 3259.717360] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[ 3259.717369] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[ 3259.717377] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[ 3259.717386] [WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_CK(GPIO56)
<3>[ 3259.717395] [WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_WS(GPIO57)
<3>[ 3259.717404] [WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_DAT(GPIO58)
<3>[ 3259.717413] [WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(GPIO118)
<3>[ 3259.717422] [WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(not defined)
<3>[ 3259.717431] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[ 3259.717442] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<3>[ 3259.717454] [WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 3259.717464] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[ 3259.717478] [WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 3259.717489] [WMT-PLAT][W]wmt_plat_gps_lna_ctrl:host gps lna pin not defined!!!
<3>[ 3259.717499] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<7>[ 3259.734985] [2431:close-XMPP-conn] exit
<7>[ 3259.748439] [2435:khelper] exit
<7>[ 3259.748466] [2435:khelper] sig 17 to [2434:khelper]
<7>[ 3259.748513] [2434:khelper] exit
<7>[ 3259.748659] [5:khelper] fork [2437:khelper]
<7>[ 3259.758427] [2436:er.ServerThread] set proc[2436] name: -> [Thread-201]
<7>[ 3259.761217] [2436:Thread-201] exit
<7>[ 3259.761327] [2437:khelper] fork [2438:khelper]
<7>[ 3259.762119] [2151:WifiWatchdogThr] exit
<7>[ 3259.799592] [2438:khelper] exit
<7>[ 3259.799619] [2438:khelper] sig 17 to [2437:khelper]
<7>[ 3259.799662] [2437:khelper] exit
<7>[ 3259.799839] [5:khelper] fork [2439:khelper]
<7>[ 3259.811138] [2439:khelper] fork [2440:khelper]
<7>[ 3259.819740] [2440:khelper] exit
<7>[ 3259.819774] [2440:khelper] sig 17 to [2439:khelper]
<7>[ 3259.819829] [2439:khelper] exit
<7>[ 3259.820079] [2150:wpa_supplicant] exit
<7>[ 3259.820466] [2150:wpa_supplicant] sig 17 to [1:init]
<3>[ 3259.820709] init: untracked pid 2150 exited
<5>[ 3259.892533] [Power/Battery] [use_chip_trim_value] 26 -> 26
<5>[ 3259.900591] [Power/Battery] [use_chip_trim_value] 27 -> 27
<5>[ 3259.901478] [Power/Battery] [use_chip_trim_value] 13 -> 13
<5>[ 3259.907516] [Power/Battery] [FGADC] 1,27,0,13,4178,100,100,96,1135,1135,0,0,0,1000,0,4185,1000,1,0,26,106,103
<3>[ 3259.918338] [WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[ 3259.918362] [WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<4>[ 3259.918542] [STP-PSM] [E]_stp_psm_notify_stp(1174):ERROR! Invalid Action!!
<4>[ 3259.918548]
<3>[ 3259.918566] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[ 3259.918578] [WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 3259.918588] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<4>[ 3259.918711] mt6575_get_bus_freq() return 192400
<3>[ 3259.918842] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[ 3259.918852] Flush type = 4 Rx Queue
<3>[ 3259.918977] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[ 3259.918991] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[ 3259.919004] [STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[ 3259.919012] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[ 3259.919021] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<6>[ 3259.919034] [STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[ 3259.919044] [STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[ 3259.919056] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[ 3259.919067] [STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[ 3259.925085] [WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6628)
<3>[ 3259.930708] [WMT-IC][I]mt6628_ver_check:MT6628: read hw_ver (hw version) (0x8a10)
<3>[ 3259.936305] [WMT-IC][I]mt6628_ver_check:MT6628: read fw_ver (rom version) (0x8a10)
<3>[ 3259.936319] [WMT-IC][I]mt6628_find_wmt_ic_info:found ic info(0x8a10) by full match! index:1
<3>[ 3259.936333] [WMT-IC][I]mt6628_ver_check:MT6628: wmt ic info: MT6628.E2 (0x8a10, WMTHWVER:1, patch_ext:_e2)
<3>[ 3259.936347] [WMT-CORE][I]wmt_core_hw_check:chip id(0x6628) ver_check ok
<3>[ 3259.947230] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[ 3259.947244] [WMT-IC][I]mt6628_sw_init:WMT-CORE: change baudrate(4000000) ok
<3>[ 3259.951926] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(srh_patch) result(0)
<3>[ 3259.951941] [WMT-IC][I]mt6628_patch_dwn:valid patch found: (/system/etc/firmware//mt6628_patch_e2_hdr.bin)
<3>[ 3259.952765] [WMT-IC][I]mt6628_patch_dwn:===========================================
<3>[ 3259.952778] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Built Time = 20121011154301a
<3>[ 3259.952789] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[ 3259.952799] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[ 3259.952809] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Ph Ver = 0x0010
<3>[ 3259.952818] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Platform = 1150
<3>[ 3259.952828] [WMT-IC][I]mt6628_patch_dwn:===========================================
<5>[ 3259.954631] [Power/Battery] [BATTERY:AVG] BatTemp:30 Vbat:4187 VBatSen:4200 SOC:100 ChrDet:1 Vchrin:4999 Icharging:218 ChrType:1 USBstate:2 gADC_I_SENSE_offset:5
<5>[ 3259.958162] [Power/Battery] [BATTERY] post_charging_time=50,POST_CHARGING_TIME=1800
<6>[ 3260.028396] yaffs: userdata sync do_checkpoint 0,gc_urgen 0
<6>[ 3260.028410] yaffs: userdata yaffs_FlushSuperBlock 0
<3>[ 3260.095997] [WMT-IC][I]mt6628_patch_dwn:wmt_core: patch dwn:0 frag(22, 884) ok
<3>[ 3260.096734] [WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf086a4c)
<3>[ 3260.097736] [WMT-IC][I]mt6628_sw_init:init_coex ok
<6>[ 3260.098494] [STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[ 3260.098508] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[ 3260.098519] [STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[ 3260.098530] [WMT-IC][I]mt6628_sw_init:enable host STP-UART-FULL mode
<3>[ 3260.121305] [WMT-IC][I]mt6628_sw_init:set fm mode (2) ok
<3>[ 3260.121317] [WMT-IC][I]mt6628_sw_init:disable mt662x firmware coredump
<6>[ 3260.121328] [STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[ 3260.121341] [STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[ 3260.121352] mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[ 3260.121359] board_sdio_ctrl force off before on
<6>[ 3260.121366] mtk_wcn_cmb_sdio_off (3)
<6>[ 3260.121406] mtk_wcn_cmb_sdio_on (3)
<3>[ 3260.121439] msdc3 -> USR Resume <- msdc_pm() : L<1233> PID
<3>[ 3260.121959] msdc3 -> sdio ops_get_cd<1> <- msdc_ops_get_cd() : L<3030> PID
<3>[ 3260.158583] msdc3 -> ================ <- msdc_set_mclk() : L<694> PID
<3>[ 3260.158601] msdc3 -> !!! Set<260KHz> Source<197000KHz> -> sclk<259KHz> DDR<0> mode<0> div<190> <- msdc_set_mclk() : L<696> PID
<3>[ 3260.158615] msdc3 -> ================ <- msdc_set_mclk() : L<697> PID
<3>[ 3260.178906] msdc3 -> XXX CMD<52> MSDC_INT_CMDTMO Arg<0x00000c00> <- msdc_irq() : L<3215>
<3>[ 3260.179496] msdc3 -> XXX CMD<52> MSDC_INT_CMDTMO Arg<0x80000c08> <- msdc_irq() : L<3215>
<3>[ 3260.183776] msdc3 -> XXX CMD<8> MSDC_INT_CMDTMO Arg<0x000001aa> <- msdc_irq() : L<3215>
<3>[ 3260.185114] msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1293> PID
<3>[ 3260.205244] msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<2975> PID
<3>[ 3260.205280] msdc3 -> ================ <- msdc_set_mclk() : L<694> PID
<3>[ 3260.205295] msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<696> PID
<3>[ 3260.205309] msdc3 -> ================ <- msdc_set_mclk() : L<697> PID
<6>[ 3260.206113] mmc1: new high speed SDIO card at address 0001
<6>[ 3260.207106] [WMT-DFT][I]hif_sdio_probe:start!
<6>[ 3260.207120] [WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x6628) num(0x1)
<6>[ 3260.207130] [WMT-DFT][I]hif_sdio_probe:card->info[0]: 6628
<6>[ 3260.207138] [WMT-DFT][I]hif_sdio_probe:card->info[1]: Combo
<6>[ 3260.207146] [WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[ 3260.207154] [WMT-DFT][I]hif_sdio_probe:card->info[3]:
<6>[ 3260.207237] [WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(520192)
<6>[ 3260.278345] [WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[ 3260.278454] [2:kthreadd] fork [2441:kthreadd]
<6>[ 3260.278485] [WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<5>[ 3260.278509] [wlan] net_device prDev(0xc33d3000) allocated
<5>[ 3260.279758] [wlan] Open FW image: WIFI_RAM_CODE done
<5>[ 3260.285559] [wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[ 3260.285605] [wlan] Virtual Address = cfdda000 for COMMON MGMT MEMORY POOL.
<5>[ 3260.285617] [wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[ 3260.285638] [wlan] Virtual Address = cfddd000 for SW_RFB_T.
<5>[ 3260.285648] [wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[ 3260.285671] [wlan] Virtual Address = cfde2000 for MSDU_INFO_T.
<6>[ 3260.285683] [wlan] wlanAdapterStart(): Acquiring LP-OWN
<6>[ 3260.298413] [wlan] Chip ID: 0x6628
<6>[ 3260.298425] [wlan] Revision ID: 0x0
<6>[ 3261.041453] [wlan] wlanAdapterStart(): Waiting for Ready bit..
<7>[ 3261.059256] [339:BinderThd_AP200] sig 9 to [2323:ps.fota.sysoper]
<7>[ 3261.059439] [339:BinderThd_AP200] sig 9 to [2315:com.adups.fota]
<7>[ 3261.059746] [2323:ps.fota.sysoper] exit
<7>[ 3261.059778] [2324:HeapWorker] exit
<7>[ 3261.059988] [2326:Signal Catcher] exit
<7>[ 3261.060034] [2327:Compiler] exit
<7>[ 3261.060068] [2328:BinderThd_AP232] exit
<7>[ 3261.060099] [2329:BinderThd_AP232] exit
<7>[ 3261.060130] [2316:HeapWorker] exit
<7>[ 3261.060161] [2317:GC] exit
<7>[ 3261.060189] [2318:Signal Catcher] exit
<7>[ 3261.060219] [2319:Compiler] exit
<7>[ 3261.060248] [2320:BinderThd_AP231] exit
<7>[ 3261.060277] [2325:GC] exit
<7>[ 3261.062951] [2315:com.adups.fota] exit
<7>[ 3261.063001] [2321:BinderThd_AP231] exit
<7>[ 3261.065210] [368:BinderThd_AP200] fork [2442:BinderThd_AP200]
<7>[ 3261.065638] [2325:GC] sig 17 to [97:zygote]
<7>[ 3261.065777] [2442:BinderThd_AP200] set proc[2442] name: -> [executeAppTrans]
<7>[ 3261.066155] [2442:executeAppTrans] exit
<7>[ 3261.066218] [2322:Thread-9] exit
<7>[ 3261.071756] [200:system_server] fork [2443:system_server]
<7>[ 3261.071980] [2322:Thread-9] sig 17 to [97:zygote]
<7>[ 3261.072115] [2443:system_server] set proc[2443] name: -> [executeAppTrans]
<7>[ 3261.072483] [2443:executeAppTrans] exit
<6>[ 3261.218382] [wlan] Ready bit asserted
<5>[ 3261.248630] [wlan] [wifi] wlan%d netif_carrier_off
<6>[ 3261.248646] [wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[ 3261.248712] [wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[ 3261.248776] [wlan] Domain: map=0, idx=0, code=0x4555
<7>[ 3261.249057] [2:kthreadd] fork [2444:kthreadd]
<5>[ 3261.249095] [wlan] tx_thread starts running...
<6>[ 3261.319564] [WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(6628) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[ 3261.319579] [WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[ 3261.319597] [WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 coredump:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[ 3261.319642] [STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<3>[ 3261.319672] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<4>[ 3261.319817] [STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<6>[ 3261.320293] [RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<7>[ 3261.321381] [1:init] fork [2445:init]
<7>[ 3261.323572] [242:WifiService] fork [2446:WifiService]
<7>[ 3261.324334] [2445:init] set proc[2445] name: -> [logwrapper]
<7>[ 3261.327804] [2446:WifiService] set proc[2446] name: -> [WifiMonitor]
<7>[ 3261.338934] [2445:logwrapper] fork [2447:logwrapper]
<7>[ 3261.344531] [2447:logwrapper] set proc[2447] name: -> [wpa_supplicant]
<7>[ 3261.351448] [242:WifiService] fork [2448:WifiService]
<7>[ 3261.352478] [214:er.ServerThread] fork [2449:er.ServerThread]
<7>[ 3261.388420] [2449:er.ServerThread] set proc[2449] name: -> [Thread-206]
<7>[ 3261.389359] [2449:Thread-206] exit
<7>[ 3261.389419] [2448:WifiService] set proc[2448] name: -> [WifiWatchdogThr]
<5>[ 3261.529209] [wlan] N=0 closed
<5>[ 3261.529235] [wlan] EVENT-ROAMING ABORT: Current Time = 2961510
<5>[ 3261.529249] [wlan] [13] TRANSITION: [0] -> [0]
<7>[ 3261.529709] [5:khelper] fork [2450:khelper]
<6>[ 3261.529778] [wlan] NAF=0,0,0
<6>[ 3261.529948] [wlan] NAF=0,0,0
<7>[ 3261.530034] [2450:khelper] fork [2451:khelper]
<7>[ 3261.530099] [2451:khelper] exit
<7>[ 3261.530167] [2451:khelper] sig 17 to [2450:khelper]
<7>[ 3261.530209] [2450:khelper] exit
<7>[ 3261.559025] [2388:AsyncTask #2] fork [2452:AsyncTask #2]
<7>[ 3261.563297] [2452:AsyncTask #2] set proc[2452] name: -> [dmesg]
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GRK39F
ro.build.display.id=GT-N7100 20130416-170452
ro.build.version.incremental=eng.scm.1366102946
ro.custom.build.version=1366102946
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=4.1.1
ro.build.date=Tue Apr 16 17:04:52 CST 2013
ro.build.date.utc=1366103092
ro.build.type=user
ro.build.user=scm
ro.build.host=vanzo65
ro.build.tags=test-keys
ro.product.model=GT-N7100
ro.product.brand=Samsung
ro.product.name=K2-A
ro.product.device=K2-A
ro.product.board=K2-A
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Samsung GT-N7100
ro.product.locale.language=en
ro.product.locale.region=EN
ro.wifi.channels=
ro.board.platform=MT75R2_K2-A_V3
# ro.build.product is obsolete; use ro.product.device
ro.build.product=K2-A
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=K2-A-user 4.1.1 GRK39F eng.scm.1366102946 test-keys
ro.build.fingerprint=Samsung/K2-A/K2-A:4.1.1/GRK39F/1366102946:user/test-keys
ro.build.flavor=mt75r2_k2-a_s802g3-mul_shengda_twog_sw_mul_tphone
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=ALPS.GB2.MP.V2.20
ro.mediatek.platform=MT6575
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.GB2.MP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
#
# ADDITIONAL_BUILD_PROPERTIES
#
fmradio.driver.chip=3
ro.sf.hwrotation=0
ril.current.share_modem=2
launcher2.allappsgrid=3d_20
curlockscreen=13
ro.mediatek.gemini_support=true
ro.mediatek.drm_support=true
mediatek.wlan.chip=MT6628
mediatek.wlan.module.postfix=_mt6628
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.config.ringtone=CaribbeanIce.ogg
ro.init.alarm_vol=5
ro.init.ringtone_vol=6
ro.init.screen_brightness=250
ro.setupwizard.mode=DISABLED
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
lca_core 2718 0 - Live 0xbf000000 (P)
pvrsrvkm 163658 42 mtkbc,mtklfb, Live 0xbf006000
mtklfb 14525 0 - Live 0xbf03c000
mtkbc 6303 0 - Live 0xbf046000
mtk_drvb 4403 0 - Live 0xbf04d000 (P)
mtk_hif_sdio 17706 2 wlan_mt6628,mtk_stp_wmt, Live 0xbf054000
mtk_stp_wmt 363727 8 wlan_mt6628,mtk_fm_priv,mtk_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf05f000 (P)
mtk_stp_uart 21521 1 - Live 0xbf0c8000 (P)
mtk_stp_gps 37166 0 - Live 0xbf0d3000
mtk_stp_bt 39754 0 - Live 0xbf0e2000
mtk_fm_drv 98138 1 mtk_fm_priv, Live 0xbf0f1000
mtk_fm_priv 2427 0 - Live 0xbf112000 (P)
wlan_mt6628 279998 0 - Live 0xbf118000 (P)
ccci_plat 101892 3 sec,ccmni,ccci, Live 0xbf175000 (P)
ccci 138050 15 ccmni, Live 0xbf197000 (P)
ccmni 16350 0 - Live 0xbf1c6000 (P)
mt6575_m4u 84190 4 - Live 0xbf1d0000 (P)
devinfo 756 0 - Live 0xbf1ed000 (P)
mt6575_vcodec_kernel_driver 23905 0 - Live 0xbf1f3000 (P)
sec 84741 0 - Live 0xbf200000 (P)
aed 18230 3 - Live 0xbf21c000 (P)
RAM: 256 MB (242 MB available)
System RAM: 242.000MB
mtkfb.0: 4.000MB
Flash: 8 GB (7.402 GB actual); 0.5 GB (0.454 GB actual)
mmcblk0: 7.402 GB
mtdblock: 0.025 GB
mtdblock1: 0.454 GB
Touch Screen for Samsung GT-N7100 GT-N7100
$2.07 Pen Stylus Pen For Samsung Galaxy Note 2 ii gt n7100 t889 i605 Touch Screen Pen
$0.58 Universal Touch Screen Pen Writing Stylus Pen For Tablet Drawing Capacitive Pencil for Galaxy Note 2 II GT N7100 T889 I605
$0.53 Touch Screen S Pen Stylus Writing Pencil Soft Tip Replacement For Galaxy Note 2 Ii Gt N7100 T889 I605 Phone Accessories
$0.54 Writing Touch Screen Pen Stylus For Samsung Galaxy Note 2 II GT N7100 T889 I605
$0.55 Stylus Pen Writing Touch Screen Pen Stylus For Samsung Galaxy Note 2 II GT N7100/T889/I605 Drawing Gaming Touch Screen Pen
$0.62 Touch Screen Pen Stylus Writing for Galaxy Note 2 II GT N7100 T889 I605
$0.87 Writing Touch Screen Pen Stylus for Galaxy Note 2 II GT N7100 T889 I605
$0.61 Stylus Touch Screen Pen Writing for Galaxy Note 2 II GT N7100 T889 I605
$0.5 Stylus Pen Mobile Phone Touch Pen Touch Screen Stylus Pens Mobile Phone Stylus for Samsung Galaxy Note 2 II GT N7100 T889 I605
Replacement Battery for Samsung GT-N7100 GT-N7100
$98.08 Battery For Samsung Galaxy Note 2 II 3 4 N9500 Note4 N9000 N9100 N910X Note3 III N9005 Note2 N7100 GT-N7000 Phone Bateria
$12.83 Back Housing Cover For Samsung Galaxy Note 2 N7100 N7102 n719 gt-n7108 Rear Battery Door Lid Case Original New + Logo
$92.98 Phone Battery B800BE EB595675LU For Samsung Galaxy Note 1 2 3 4 SM N900 N7100 N910 N910F N910A GT N7000 I9220 Note2 Note3 Note4
$92.98 Phone Battery B800BE EB595675LU For Samsung Galaxy Note 1 2 3 4 SM N900 N7100 N910 N910F N910A GT N7000 I9220 Note2 Note3 Note4
$81.6 CS Mobile SmartPhone Battery for Samsung GT-N7100 N7105 Galaxy Note II LTE 32GB Note 2 SCH-i605 GT-N7108 Fits EB595675LU L1J9LVD
$8.99 2 pieces Batteries Note2 EB595675LU,Note 3 N9000 Battery Replacement For Samsung Galaxy Note II GT-N7100 N719 N7108 ,Note III G
Cover Cases for Samsung GT-N7100 GT-N7100
$25.61 Case for iPhone 15 14 13 12 11 Pro Max with Back Clip Anti-Fall Mecha Shockproof Armor Cover Case for iPhone XR XS Max
$3.85 For Magsafe Luxury Leather Shockproof Phone Cases For iPhone 16 15 14 13 12 11 Pro Max 16 Plus Magnetic Wireless Charging Cover
$3999 Apple iPhone 13 128GB Midnight 6,1 Screen ”12MP
$50.03 Magsafe Invisible Bracket Cover For iPhone 12 13 14 15 16 ProMax Magnetic Leather Phone Case For IPhone 13 14 15 16 Pro Max Plus
$2.6 Luxury PU Deer Leather Case For Magsafe Wireless Charge For iPhone 16 15 14 13 12 11 Pro Max Plus iPhone15 iPhone16 16Pro Covers
$34.59 Case For iPhone 16 15 14 13 12 Pro Max Plus 8 7 Plus Mini SE Heavy Duty Protection With Sliding Camera Cover And Card Clip Cover
$3.28 Luxury Plating For Magsafe Wireless Charge Case For iPhone 11 12 13 14 15 Pro Max 14 Plus Phone Cases Soft Magnetic Bumper Cover
$22.88 Luxury Deer Head Leather Magnetic Case For iPhone 16 15 14 13 12 11 Pro Max Plus XS Max XR X Wireless Charging Phone Accessories
$22.08 Luxury Magsafe Wireless Charge Phone Case For iPhone 16 15 14 13 12 11 Pro Max XR Soft Magnetic Black Shockproof Silicone Cover
$3.37 Luxury Matte Leather For Magsafe Magnetic Wireless Charge Case For iPhone 16 15 14 Plus 13 11 12 Pro Max X S XR Shockproof Cover
$24.76 Luxury Leather Case For iPhone 16 15 14 11 13 12 Pro Max Mini XR 15 14 16 Plus Shockproof Cover For iPhone XS Max 8 7 SE Funda
$3.06 Fashion Clear For Magsafe Case For iPhone 14 13 12 11 15 Pro Max Plus Magnetic Cases Plating Soft Silicone Wireless Charge Cover
$24.41 Luxury Wireless Charging Magnetic Cortex Leather Phone Case For iPhone 16 13 12 15 Pro Max 14 Plus 14Pro Shockproof Bumper Cover
$20.85 Luxury Matte Magnetic For Magsafe Wireless Charge Case For iPhone 16 15 14 13 11 12 Pro Max Plus XS Max XR X Armor Cover funda
$4.2 2Pcs Privacy Tempered Glass Screen Protector for IPhone 15 14 13 12 11 16 Pro Max Plus Anti-Spy Dust free Installation Protector
$39.32 SUTENI Compatible Wireless Charging Luxury PU Leather case For iPhone 12 13 14 15 Plus 16 Pro Max
$2.38 360 Full Cover Phone Case For iPhone 7 8 6 6s Plus SE 2020 Protective Cover For iPhone 11 Pro XS MAX XR 5 5s 7 Case With Glass
$36.2 Luxury For Magsafe Wireless Charging Phone Case For iPhone 15 Pro 14 Plus 13 12 11 Pro Max Elk Magnetic Bumper Protective Cover
$2.72 Retro Leather Case For Magsafe Wireless Charging For iPhone 16 15 14 13 12 11 Pro Max Plus 15Pro 14Pro 13Pro 16Pro Magnet Cover
$4.3 Wood Grain Large Window Magnetic for Magsafe Wireless Charging Case For iPhone 16 15 14 13 11 12 Pro Max Camera Protection Cover
Find Similar devices | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |