1. Install SpecDevice
2. Run and decode your specs
3. Get your link (read more...)
General Specifications | |
---|---|
Manufacturer | alps |
Model | A606 |
Firmware | 4.0.4; eng.ser4.1352363716; SDK15 |
CPU | 1 core; ARMv7 Processor rev 10 (v7l); Max: 1001,0 MHz; Min: 166,8 MHz |
Display | 480 x 320; DPI: 160; Evaluated Size: 3,6" |
Touch screen | Multitouch 2 points |
GPU | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.8@789263 |
RAM | 512 MB (488 MB available) |
Flash | 8 GB Build-in (7.441 GB actual); 0.5 GB (0.490 GB actual) |
Communications | |
Phone | GSM, Dual SIM; Net: UMTS |
WiFi | wlan_mt6620; IEEE 802.11 a/b/g/n; MediaTek MT6620; AP Mode |
USB Host | Yes |
Bluetooth | Bluetooth 4.0+HS |
GPS | Yes |
Advanced Features | |
Front camera | Photo: 4.9 MP; Max: 2560x1920; Focus: infinity; Flash modes: on off torch |
Back camera | Photo: 0.3 MP; Max size: 640x480; Focus: infinity; No flash |
Sensors | ADXL345 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; |
CM3623 Proximity Sensor (Capella); range: 0...1; resolution: 1 (100%); power: 0,13mA; | |
CM3623 Light Sensor (Capella); range: 0...10240; resolution: 1 (0,01%); power: 0,13mA; | |
Vibrator | Yes |
Supported languages | 43; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
Battery | Technology: Li-ion; Voltage: 3704 |
FM radio | 76MHz to 108MHz + Transmitter |
Owner's comment: | inco dual |
SD Version: | 1.1 5 |
KERNEL: Linux version 3.0.13 (ser4@ser4-System-Product-Name) (gcc version 4.4.3 (GCC) ) #1 PREEMPT Thu Nov 8 16:34:59 CST 2012
CODENAME: REL
Mainboard: htt75_nand_6628_ics
BRAND: Inco
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: htt75_nand_6628_ics
DISPLAY: ALPS.ICS.MP.V2.19
FINGERPRINT: HTT:4.0.4/IMM76D/1352363716:user/test-keys
HARDWARE: mt6575
ID: IMM76D
TAGS: test-keys
Processor : ARMv7 Processor rev 10 (v7l)
BogoMIPS : 1993.93
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc09
CPU revision : 10
Hardware : MT6575
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<7>[531036.279307] [14627:dmesg] exit
<7>[531036.279459] [14627:dmesg] sig 17 to [14616:AsyncTask #3]
<7>[531036.298435] [308:WifiStateMachin] fork err at pid
<7>[531036.298460] [308:WifiStateMachin] fork [14628:WifiStateMachin]
<7>[531036.302728] [267:er.ServerThread] fork err at pid
<7>[531036.302754] [267:er.ServerThread] fork [14629:er.ServerThread]
<7>[531036.302797] [14629:er.ServerThread] set proc[14629] name: ->[Thread-7144]
<7>[531036.303797] [14629:Thread-7144] exit
<7>[531036.304670] [14628:WifiStateMachin] set proc[14628] name: ->[loadDriverThrea]
<6>[531036.337847] [WLAN] rfkill_set_block(blocked 0)
<6>[531036.337858] [WLAN] Power on
<3>[531036.337870] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[531036.338659] [STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[531036.338691] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[531036.339766] [WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(GPIO183)
<3>[531036.340496] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO185)
<3>[531036.341200] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(not defined)
<3>[531036.345264] [WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[531036.345965] [WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO13)
<3>[531036.346950] [WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(14)
<3>[531036.347701] [WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO75)
<3>[531036.348554] [WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(6)
<3>[531036.356995] [WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<3>[531036.361127] [WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[531036.361919] [WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[531036.362646] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[531036.364406] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[531036.365127] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[531036.369832] [WMT-PLAT][I]wmt_plat_dump_pin_conf:FM digital mode is not set, no need for I2S GPIOs
<3>[531036.372142] [WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(GPIO72)
<3>[531036.372898] [WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(GPIO186)
<3>[531036.373654] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[531036.374792] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<3>[531036.375636] [WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<7>[531036.379403] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 12864538 > 8ms
<7>[531036.379433] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[531036.395982] WQ_WARN: cpu:1, proc:kworker/u:3, dur: 12083539 > 8ms
<7>[531036.396012] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[531036.412586] WQ_WARN: cpu:1, proc:kworker/u:3, dur: 14004693 > 8ms
<7>[531036.412617] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[531036.429179] WQ_WARN: cpu:1, proc:kworker/u:3, dur: 13998154 > 8ms
<7>[531036.429210] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[531036.445779] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 14027231 > 8ms
<7>[531036.445810] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[531036.462376] WQ_WARN: cpu:1, proc:kworker/u:3, dur: 14123461 > 8ms
<7>[531036.462407] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[531036.478965] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 14011462 > 8ms
<7>[531036.478996] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[531036.495594] WQ_WARN: cpu:1, proc:kworker/u:3, dur: 14037153 > 8ms
<7>[531036.495641] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[531036.512244] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 13642231 > 8ms
<7>[531036.512291] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[531036.528809] WQ_WARN: cpu:1, proc:kworker/u:3, dur: 13788924 > 8ms
<7>[531036.528855] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[531036.545399] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 13672077 > 8ms
<7>[531036.545446] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[531036.561996] WQ_WARN: cpu:1, proc:kworker/u:3, dur: 13560077 > 8ms
<7>[531036.562044] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<3>[531036.577814] [WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[531036.578620] [WMT-PLAT][I]wmt_plat_i2s_ctrl:[MT6620]warnning:FM digital mode is not set, no I2S GPIO settings should be modified by combo driver
<3>[531036.580242] [WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<3>[531036.581205] [WMT-LIB][I]wmt_lib_ps_handler:MT6620 Not Ready, Dont Send Sleep/Wakeup Command
<4>[531036.582259] [STP-PSM] [E]_stp_psm_notify_stp(990):ERROR! Invalid Action!!
<4>[531036.582270]
<3>[531036.583319] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[531036.584426] [WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[531036.585325] [WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:ALL EINT not defined
<3>[531036.586182] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<4>[531036.587291] mt6575_get_bus_freq() return 192400
<7>[531036.587989] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 23047077 > 8ms
<7>[531036.588035] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<3>[531036.588439] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[531036.589199] Flush type = 4 Rx Queue
<3>[531036.594953] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[531036.595779] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[531036.595801] [STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[531036.596565] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[531036.597270] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[531036.598051] [STP-PSM] [I]_stp_psm_set_state: work_state = ACT --> ACT
<6>[531036.598873] [STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[531036.598893] [STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[531036.598913] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<3>[531036.604435] [WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6620)
<3>[531036.610771] [WMT-IC][I]mt6620_ver_check:MT6620: read hw_ver (hw version) (0x8a11)
<7>[531036.611799] WQ_WARN: cpu:1, proc:kworker/u:3, dur: 17910077 > 8ms
<7>[531036.611843] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<3>[531036.618313] [WMT-IC][I]mt6620_ver_check:MT6620: read fw_ver (rom version) (0x8a10)
<3>[531036.619290] [WMT-IC][I]mt6620_find_wmt_ic_info:found ic info(0x8a11) by full match! index:3
<3>[531036.620448] [WMT-IC][I]mt6620_ver_check:MT6620: wmt ic info: MT6620.E4 (0x8a11, WMTHWVER:3, patch_ext:_e3)
<3>[531036.622019] [WMT-CORE][I]wmt_core_hw_check:chip id(0x6620) ver_check ok
<7>[531036.628342] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 11023231 > 8ms
<7>[531036.628386] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<3>[531036.635356] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[531036.636198] [WMT-IC][I]mt6620_sw_init:WMT-CORE: change baudrate(4000000) ok
<3>[531036.638897] [WMT-IC][I]mt6620_update_patch_name:full firmware patch name: /system/etc/firmware/mt6620_patch_e3_hdr.bin
<3>[531036.643452] [WMT-IC][I]mt6620_patch_dwn:===========================================
<3>[531036.644657] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Built Time = 20120628180248
<7>[531036.645710] WQ_WARN: cpu:1, proc:kworker/u:3, dur: 13693154 > 8ms
<7>[531036.645754] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<3>[531036.645888] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[531036.646735] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[531036.653203] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Ph Ver = 0x0016
<3>[531036.654024] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Platform = 1212
<3>[531036.654936] [WMT-IC][I]mt6620_patch_dwn:===========================================
<7>[531036.661535] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 12007769 > 8ms
<7>[531036.661580] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[531036.678169] WQ_WARN: cpu:1, proc:kworker/u:3, dur: 13430769 > 8ms
<7>[531036.678215] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[531036.696129] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 13499154 > 8ms
<7>[531036.696176] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[531036.711377] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 13413385 > 8ms
<7>[531036.711424] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[531036.727921] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 14778615 > 8ms
<7>[531036.727963] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<3>[531036.815958] [WMT-CTRL][W]wmt_ctrl_rx:wmt_ctrl_rx be signaled, but no rx data(200)
<3>[531036.850957] [WMT-CTRL][W]wmt_ctrl_rx:wmt_ctrl_rx be signaled, but no rx data(200)
<3>[531036.921670] [WMT-CTRL][W]wmt_ctrl_rx:wmt_ctrl_rx be signaled, but no rx data(200)
<3>[531037.008009] [WMT-IC][I]mt6620_patch_dwn:wmt_core: patch dwn:0 frag(43, 432) ok
<3>[531037.009030] [WMT-IC][I]mt6620_sw_init:Not to check the patch validity
<3>[531037.010350] [WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf12dfc0)
<3>[531037.015065] [WMT-IC][I]mt6620_sw_init:init_coex ok
<6>[531037.023025] [STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[531037.023076] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<3>[531037.023119] [WMT-IC][I]mt6620_sw_init:enable host STP-UART-FULL mode
<3>[531037.039964] [WMT-IC][I]mt6620_sw_init:set fm mode (2) ok
<6>[531037.040660] [STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[531037.040702] [STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[531037.040736] mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[531037.041438] board_sdio_ctrl force off before on
<6>[531037.041462] mtk_wcn_cmb_sdio_off (3)
<6>[531037.041528] mtk_wcn_cmb_sdio_on (3)
<3>[531037.041591] msdc3 -> USR Resume <- msdc_pm() : L<1450> PID
<3>[531037.058031] msdc3 -> ================ <- msdc_set_mclk() : L<756> PID
<3>[531037.059122] msdc3 -> !!! Set<400KHz> Source<197000KHz> -> sclk<397KHz> DDR<0> mode<0> div<124> <- msdc_set_mclk() : L<758> PID
<3>[531037.060819] msdc3 -> ================ <- msdc_set_mclk() : L<759> PID
<3>[531037.093663] msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1512> PID
<3>[531037.117666] msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<3439> PID
<3>[531037.118884] msdc3 -> ================ <- msdc_set_mclk() : L<756> PID
<3>[531037.119965] msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<758> PID
<3>[531037.121684] msdc3 -> ================ <- msdc_set_mclk() : L<759> PID
<6>[531037.132367] mmc1: new high speed SDIO card at address 0001
<6>[531037.135635] [WMT-DFT][I]hif_sdio_probe:start!
<6>[531037.135678] [WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x20a) num(0x1)
<6>[531037.135716] [WMT-DFT][I]hif_sdio_probe:card->info[0]: MediaTek MT6620 Wireless Combo Chip
<6>[531037.135754] [WMT-DFT][I]hif_sdio_probe:card->info[1]:
<6>[531037.135783] [WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[531037.136029] [WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(520192)
<7>[531037.136101] WQ_WARN: cpu:1, proc:kworker/u:3, dur: 91046461 > 8ms
<7>[531037.136154] work: mmc_rescan+0x0/0x370
<6>[531037.197909] [WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[531037.200951] [2:kthreadd] fork err at pid
<7>[531037.201038] [2:kthreadd] fork [14630:kthreadd]
<6>[531037.206523] [WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<5>[531037.206648] [wlan] net_device prDev(0xcd15a000) allocated
<4>[531037.211576] [RT_MONITOR]WARNNING [14630:ksdioirqd/mmc1] SET NOT ALLOW RT Prio [1] for proc [14630:ksdioirqd/mmc1]
<4>[531037.212915] Backtrace:
<4>[531037.213326] [
<4>[531037.214430] r7:00000001 r6:00000000 r5:cda04000 r4:cd558c00
<4>[531037.215207] [
<4>[531037.216447] [
<4>[531037.217745] [
<5>[531037.219904] [wlan] Open FW image: WIFI_RAM_CODE done
<4>[531037.247948] [
<4>[531037.249072] [
<4>[531037.250072] r7:00000013 r6:c0089d20 r5:c00a13a0 r4:dd839d78
<5>[531037.251753] [wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[531037.253939] [wlan] Virtual Address = e2234000 for COMMON MGMT MEMORY POOL.
<5>[531037.254847] [wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[531037.255679] [wlan] Virtual Address = e23f8000 for SW_RFB_T.
<5>[531037.256409] [wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[531037.257163] [wlan] Virtual Address = e2646000 for MSDU_INFO_T.
<6>[531037.258322] [wlan] wlanAdapterStart(): Acquiring LP-OWN
<6>[531037.278055] [wlan] Chip ID: 0x6620
<6>[531037.278114] [wlan] Revision ID: 0x1
<6>[531037.943069] [wlan] wlanAdapterStart(): Waiting for Ready bit..
<6>[531038.318007] [wlan] Ready bit asserted
<5>[531038.372356] [wlan] [wifi] wlan%d netif_carrier_off
<6>[531038.373004] [wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[531038.373160] [wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[531038.373468] [wlan] Domain: map=0, idx=0, code=0x0000
<7>[531038.374987] [2:kthreadd] fork err at pid
<7>[531038.375071] [2:kthreadd] fork [14631:kthreadd]
<5>[531038.375216] [wlan] tx_thread starts running...
<6>[531038.392076] [WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(20a) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[531038.392091] [WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[531038.392108] [WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[531038.393444] [STP-PSM] [I]_stp_psm_enable: PSM MODE Enable==============================>
<4>[531038.393452]
[STP-PSM] [I]_stp_psm_dump_active_q: Active op list:++
<4>[531038.395247] [STP-PSM] [I]_stp_psm_dump_active_q: STP_OPID_PSM_WAKEUP
<4>[531038.396049] [STP-PSM] [I]_stp_psm_dump_active_q: Active op list:--
<4>[531038.396841] [STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<4>[531038.401660] [STP-PSM] [I]_stp_psm_notify_wmt_wakeup_wq: OPID(1) type(0) bRet(1)
<4>[531038.401668]
<4>[531038.402848] [STP-PSM] [I]_stp_psm_do_wait: +Total waits for ACT takes 0 msec
<4>[531038.403982] [STP-PSM] [I]_stp_psm_enable: PSM MODE Enable<=============================
<4>[531038.403990]
<3>[531038.405178] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<7>[531038.410735] [14628:loadDriverThrea] exit
<7>[531038.417530] [13125:kworker/u:3] fork err at pid
<7>[531038.417553] [13125:kworker/u:3] fork [14632:kworker/u:3]
<7>[531038.417821] [14632:kworker/u:3] fork err at pid
<7>[531038.417840] [14632:kworker/u:3] fork [14633:kworker/u:3]
<7>[531038.421146] [14633:kworker/u:3] exit
<7>[531038.421190] [14633:kworker/u:3] sig 17 to [14632:kworker/u:3]
<7>[531038.421241] [14632:kworker/u:3] exit
<6>[531038.422070] [RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[531038.422092] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[531038.443382] [1:init] fork err at pid
<7>[531038.443408] [1:init] fork [14634:init]
<7>[531038.444248] [308:WifiStateMachin] fork err at pid
<7>[531038.444274] [308:WifiStateMachin] fork [14635:WifiStateMachin]
<7>[531038.444554] WQ_WARN: cpu:0, proc:kworker/0:0, dur: 22375154 > 8ms
<7>[531038.444625] work: wlanSetMulticastListWorkQueue+0x0/0x1f4 [wlan_mt6620]
<7>[531038.444666] [14635:WifiStateMachin] set proc[14635] name: ->[WifiMonitor]
<7>[531038.446771] [14634:init] set proc[14634] name: ->[logwrapper]
<7>[531038.449398] [14634:logwrapper] fork err at pid
<7>[531038.449424] [14634:logwrapper] fork [14636:logwrapper]
<7>[531038.450522] [14636:logwrapper] set proc[14636] name: ->[wpa_supplicant]
<5>[531038.608043] [wlan] N=0 closed
<5>[531038.608483] [wlan] EVENT-ROAMING ABORT: Current Time = 530738590
<5>[531038.609232] [wlan] [13] TRANSITION: [0] -> [0]
<6>[531038.612648] [wlan] NAF=0,0,0
<6>[531038.612662] [wlan] NAF=0,0,0
<5>[531038.804693] [wlan] [13] TRANSITION: [0] -> [2]
<7>[531038.809412] [31880:ndroid.settings] fork err at pid
<7>[531038.809436] [31880:ndroid.settings] fork [14637:ndroid.settings]
<7>[531038.816646] [14637:ndroid.settings] set proc[14637] name: ->[IntentService[A]
<7>[531038.820358] [14637:IntentService[A] exit
<7>[531038.821354] [7042:com.jb.gosms] fork err at pid
<7>[531038.821404] [7042:com.jb.gosms] fork [14638:com.jb.gosms]
<5>[531038.821509] [Power/Battery] [use_chip_trim_value] 3492 -> 3457
<5>[531038.840577] [Power/Battery] [use_chip_trim_value] 3392 -> 3358
<5>[531038.844065] [Power/Battery] [use_chip_trim_value] -22 -> -21
<5>[531038.851412] [Power/Battery] [FGADC] 0,3358,0,-21,3741,22,29,33,1320,1608,69,0,0,1000,0,3646,1000,69,70,3200,106,103
<0>[531038.853170] [MUSB]mt_usb_disconnect 321: [MUSB] USB is ready for disconnect
<7>[531038.888116] [14638:com.jb.gosms] set proc[14638] name: ->[NetworkStateRec]
<7>[531038.889634] [7042:com.jb.gosms] fork err at pid
<7>[531038.889660] [7042:com.jb.gosms] fork [14639:com.jb.gosms]
<7>[531038.891506] [14639:com.jb.gosms] set proc[14639] name: ->[NetworkStateRec]
<7>[531038.907243] [14638:NetworkStateRec] exit
<7>[531038.907293] [14639:NetworkStateRec] exit
<7>[531038.942105] [7042:com.jb.gosms] fork err at pid
<7>[531038.942131] [7042:com.jb.gosms] fork [14640:com.jb.gosms]
<7>[531038.942493] [14640:com.jb.gosms] set proc[14640] name: ->[SharedPreferenc]
<5>[531038.953240] [Power/Battery] [BATTERY:AVG] BatTemp:25 Vbat:3698 VBatSen:3642 SOC:29 ChrDet:0 Vchrin:44 Icharging:5 ChrType:1 USBstate:1 gADC_I_SENSE_offset:0
<7>[531038.958203] [14640:SharedPreferenc] exit
<7>[531038.964736] [1004:.gary.NoTePases] fork err at pid
<7>[531038.964762] [1004:.gary.NoTePases] fork [14641:.gary.NoTePases]
<7>[531038.989862] [14641:.gary.NoTePases] set proc[14641] name: ->[IntentService[P]
<7>[531039.046062] [31880:ndroid.settings] fork err at pid
<7>[531039.046089] [31880:ndroid.settings] fork [14642:ndroid.settings]
<7>[531039.056663] [14642:ndroid.settings] set proc[14642] name: ->[IntentService[A]
<7>[531039.068113] [14642:IntentService[A] exit
<5>[531039.070926] [wlan] [13] TRANSITION: [2] -> [0]
<6>[531039.077370] [wlan] NAF=0,0,0
<5>[531039.078361] [wlan] N=0 closed
<5>[531039.078823] [wlan] EVENT-ROAMING ABORT: Current Time = 530739060
<5>[531039.079587] [wlan] [13] TRANSITION: [0] -> [0]
<5>[531039.080141] [wlan] [13] TRANSITION: [0] -> [1]
<5>[531039.080708] [wlan] [13] TRANSITION: [1] -> [6]
<5>[531039.081267] [wlan] ChReq net=0 token=1 b=1 c=1 s=0
<6>[531039.101439] [wlan] NAF=0,0,0
<5>[531039.101923] [wlan] ChGrant net=0 token=1 ch=1 sco=0
<5>[531039.102674] [wlan] [13] TRANSITION: [6] -> [7]
<5>[531039.103241] [wlan] STA 40mAllowed=0
<6>[531039.105522] [wlan] Wait Cmd TxSeqNum:1
<6>[531039.107814] [wlan] EVENT_ID_TX_DONE PacketSeq:1 ucStatus: 0 SN: 26
<6>[531039.109576] [wlan] Wait Cmd TxSeqNum:2
<7>[531039.120682] [7042:com.jb.gosms] fork err at pid
<7>[531039.120709] [7042:com.jb.gosms] fork [14643:com.jb.gosms]
<6>[531039.128388] [wlan] EVENT_ID_TX_DONE PacketSeq:2 ucStatus: 0 SN: 27
<6>[531039.128417] [wlan] QM: (fgIsWmmSupported=1, fgSupportQoS=1)
<6>[531039.128429] [wlan] QM: (fgIsWmmSupported=1, fgIsQoS=1)
<6>[531039.128440] [wlan] MQM: Assoc_Rsp Parsing (QoS Enabled=1)
<5>[531039.128456] [wlan] N=0 b=1 c=1 s=0 e=0 h=0 I=0x00 l=1 p=0
<5>[531039.129130] [wlan]
<4>[531039.129380] 00:25:f1:84:59:07 [17] TRANSITION: [0] -> [3]
<4>[531039.129385]
<7>[531039.132892] [14643:com.jb.gosms] set proc[14643] name: ->[SharedPreferenc]
<7>[531039.133762] [14643:SharedPreferenc] exit
<5>[531039.133816] [wlan] [wifi] wlan0 netif_carrier_on [ssid:MOTOROLA-710F7 00:25:f1:84:59:07]
<5>[531039.134824] [wlan] EVENT-ROAMING START: Current Time = 530739110
<5>[531039.135586] [wlan] [27] TRANSITION: [0] -> [1]
<5>[531039.136144] [wlan] [13] TRANSITION: [7] -> [10]
<5>[531039.136723] [wlan] R1X len=113
<6>[531039.137869] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<5>[531039.164111] [wlan] QM: +STA[0]
<5>[531039.167338] [wlan] T1X len=137
<7>[531039.168654] WQ_WARN: cpu:0, proc:kworker/0:0, dur: 30627692 > 8ms
<7>[531039.168790] work: wlanSetMulticastListWorkQueue+0x0/0x1f4 [wlan_mt6620]
<5>[531039.173796] [wlan] R1X len=139
<5>[531039.176070] [wlan] T1X len=113
<5>[531039.181417] [wlan] R1X len=145
<5>[531039.183068] [wlan] T1X len=113
<7>[531039.228669] [308:WifiStateMachin] fork err at pid
<7>[531039.228695] [308:WifiStateMachin] fork [14644:WifiStateMachin]
<7>[531039.230856] [14644:WifiStateMachin] set proc[14644] name: ->[DhcpStateMachin]
<6>[531039.247126] [wlan] eNetTypeIndex:0, ePwrMode:0, fgEnCmdEvent:1
<5>[531039.247147] [wlan] Set Wi-Fi PS mode to CAM (0)
<7>[531039.249136] [1:init] fork err at pid
<7>[531039.249162] [1:init] fork [14645:init]
<7>[531039.251091] [14645:init] set proc[14645] name: ->[logwrapper]
<7>[531039.252655] [14645:logwrapper] fork err at pid
<7>[531039.252681] [14645:logwrapper] fork [14646:logwrapper]
<7>[531039.254559] [14646:logwrapper] set proc[14646] name: ->[dhcpcd]
<5>[531039.273585] [wlan] N=0 b=1 c=1 s=0 e=0 h=0 I=0x00 l=1 p=0
<7>[531039.279649] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 10076461 > 8ms
<7>[531039.279678] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[531039.281760] [14646:dhcpcd] fork err at pid
<7>[531039.283108] [14646:dhcpcd] fork [14647:dhcpcd]
<7>[531039.283145] [14647:dhcpcd] set proc[14647] name: ->[dhcpcd-run-hook]
<7>[531039.286935] [14647:dhcpcd-run-hook] fork err at pid
<7>[531039.286962] [14647:dhcpcd-run-hook] fork [14648:dhcpcd-run-hook]
<7>[531039.287611] [14648:dhcpcd-run-hook] set proc[14648] name: ->[ls]
<7>[531039.290232] [14648:ls] exit
<7>[531039.290362] [14648:ls] sig 17 to [14647:dhcpcd-run-hook]
<7>[531039.290812] [14647:dhcpcd-run-hook] fork err at pid
<7>[531039.290837] [14647:dhcpcd-run-hook] fork [14649:dhcpcd-run-hook]
<7>[531039.292298] [14649:dhcpcd-run-hook] set proc[14649] name: ->[ls]
<7>[531039.294588] [14649:ls] exit
<7>[531039.294716] [14649:ls] sig 17 to [14647:dhcpcd-run-hook]
<7>[531039.296133] [14647:dhcpcd-run-hook] fork err at pid
<7>[531039.296175] [14647:dhcpcd-run-hook] fork [14650:dhcpcd-run-hook]
<7>[531039.297707] [14650:dhcpcd-run-hook] set proc[14650] name: ->[ls]
<7>[531039.301559] [14650:ls] exit
<7>[531039.301683] [14650:ls] sig 17 to [14647:dhcpcd-run-hook]
<7>[531039.302456] [14647:dhcpcd-run-hook] fork err at pid
<7>[531039.302482] [14647:dhcpcd-run-hook] fork [14651:dhcpcd-run-hook]
<7>[531039.303134] [14651:dhcpcd-run-hook] set proc[14651] name: ->[setprop]
<7>[531039.306213] [14651:setprop] exit
<7>[531039.306336] [14651:setprop] sig 17 to [14647:dhcpcd-run-hook]
<7>[531039.307057] [14647:dhcpcd-run-hook] fork err at pid
<7>[531039.307082] [14647:dhcpcd-run-hook] fork [14652:dhcpcd-run-hook]
<7>[531039.307845] [14652:dhcpcd-run-hook] set proc[14652] name: ->[ls]
<7>[531039.310173] [14652:ls] exit
<7>[531039.310297] [14652:ls] sig 17 to [14647:dhcpcd-run-hook]
<7>[531039.310535] [14647:dhcpcd-run-hook] exit
<7>[531039.310637] [14647:dhcpcd-run-hook] sig 17 to [14646:dhcpcd]
<5>[531039.374911] [wlan] N=0 b=1 c=1 s=0 e=0 h=0 I=0x00 l=1 p=0
<7>[531039.383542] [14646:dhcpcd] fork err at pid
<7>[531039.384047] [14646:dhcpcd] fork [14653:dhcpcd]
<7>[531039.384081] [14653:dhcpcd] set proc[14653] name: ->[dhcpcd-run-hook]
<7>[531039.386297] [14653:dhcpcd-run-hook] fork err at pid
<7>[531039.386323] [14653:dhcpcd-run-hook] fork [14654:dhcpcd-run-hook]
<7>[531039.387676] [14654:dhcpcd-run-hook] set proc[14654] name: ->[ls]
<7>[531039.390057] [14654:ls] exit
<7>[531039.390183] [14654:ls] sig 17 to [14653:dhcpcd-run-hook]
<7>[531039.390635] [14653:dhcpcd-run-hook] fork err at pid
<7>[531039.390660] [14653:dhcpcd-run-hook] fork [14655:dhcpcd-run-hook]
<7>[531039.391686] [14655:dhcpcd-run-hook] set proc[14655] name: ->[ls]
<7>[531039.393963] [14655:ls] exit
<7>[531039.394088] [14655:ls] sig 17 to [14653:dhcpcd-run-hook]
<7>[531039.395103] [14653:dhcpcd-run-hook] fork err at pid
<7>[531039.395130] [14653:dhcpcd-run-hook] fork [14656:dhcpcd-run-hook]
<7>[531039.396102] [14656:dhcpcd-run-hook] set proc[14656] name: ->[ls]
<7>[531039.398645] [14656:ls] exit
<7>[531039.398771] [14656:ls] sig 17 to [14653:dhcpcd-run-hook]
<7>[531039.399372] [14653:dhcpcd-run-hook] fork err at pid
<7>[531039.399398] [14653:dhcpcd-run-hook] fork [14657:dhcpcd-run-hook]
<7>[531039.403931] [14657:dhcpcd-run-hook] set proc[14657] name: ->[setprop]
<7>[531039.406695] [14657:setprop] exit
<7>[531039.406820] [14657:setprop] sig 17 to [14653:dhcpcd-run-hook]
<7>[531039.407533] [14653:dhcpcd-run-hook] fork err at pid
<7>[531039.407558] [14653:dhcpcd-run-hook] fork [14658:dhcpcd-run-hook]
<7>[531039.408319] [14658:dhcpcd-run-hook] set proc[14658] name: ->[ls]
<7>[531039.410534] [14658:ls] exit
<7>[531039.410656] [14658:ls] sig 17 to [14653:dhcpcd-run-hook]
<7>[531039.410893] [14653:dhcpcd-run-hook] exit
<7>[531039.410996] [14653:dhcpcd-run-hook] sig 17 to [14646:dhcpcd]
<7>[531039.421119] [14641:IntentService[P] exit
<7>[531039.457613] [14616:AsyncTask #3] fork err at pid
<7>[531039.457641] [14616:AsyncTask #3] fork [14659:AsyncTask #3]
<7>[531039.463931] [14659:AsyncTask #3] set proc[14659] name: ->[dmesg]
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IMM76D
ro.build.display.id=ALPS.ICS.MP.V2.19
ro.build.version.incremental=eng.ser4.1352363716
ro.custom.build.version=1352363716
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=Thu Nov 8 16:42:31 CST 2012
ro.build.date.utc=1352364151
ro.build.type=user
ro.build.user=ser4
ro.build.host=ser4-System-Product-Name
ro.build.tags=test-keys
ro.product.model=A606
ro.product.brand=Inco
ro.product.name=htt75_nand_6628_ics
ro.product.device=htt75_nand_6628_ics
ro.product.chivinproduct=A606
ro.product.chivinversion=0502E028_20121108
ro.product.customversion=0502E028_20121108
ro.product.board=htt75_nand_6628_ics
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=alps
ro.product.locale.language=es
ro.product.locale.region=ES
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=htt75_nand_6628_ics
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=htt75_nand_6628_ics-user 4.0.4 IMM76D eng.ser4.1352363716 test-keys
ro.build.fingerprint=HTT:4.0.4/IMM76D/1352363716:user/test-keys
ro.build.flavor=
ro.build.characteristics=default
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=ALPS.ICS.MP.V2.19
ro.mediatek.platform=MT6575
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.ICS.MP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=128m
# audio
ro.camera.sound.forced=0
ro.audio.silent=0
# USB BICR function
ro.sys.usb.bicr=yes
ro.sys.usb.storage.type=mtp,mass_storage
#HTT liujihui {
ro.setupwizard.mode=DISABLED
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
persist.sys.timezone=America/Mexico_City
#HTT liujihui }
#
# ADDITIONAL_BUILD_PROPERTIES
#
gps.solution.combo.chip=1
fmradio.driver.chip=1
ro.sf.hwrotation=0
ril.current.share_modem=2
launcher2.allappsgrid=3d_20
curlockscreen=2
ro.mediatek.gemini_support=true
drm.service.enabled=true
fmradio.driver.enable=1
persist.radio.fd.counter=20
persist.radio.fd.off.counter=20
mediatek.wlan.chip=MT6620
mediatek.wlan.module.postfix=
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.config.ringtone=CaribbeanIce.ogg
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
wlan_mt6620 285520 0 - Live 0xbf1e4000 (P)
cfg80211 122425 0 - Live 0xbf1bb000
mtk_fm_priv 8909 0 - Live 0xbf1b5000 (P)
mt6620_fm_drv 111398 1 mtk_fm_priv, Live 0xbf18d000
mtk_stp_bt 39942 0 - Live 0xbf180000
mtk_stp_gps 37190 0 - Live 0xbf173000
mtk_stp_uart 21669 1 - Live 0xbf16a000 (P)
mtk_stp_wmt 343726 7 wlan_mt6620,mtk_fm_priv,mt6620_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf109000 (P)
mtk_hif_sdio 18042 2 wlan_mt6620,mtk_stp_wmt, Live 0xbf100000
devinfo 756 0 - Live 0xbf0fc000 (P)
sec 109563 0 - Live 0xbf0db000 (P)
mt6575_vcodec_kernel_driver 23817 2 - Live 0xbf0d0000 (P)
mt6575_m4u 110214 10 - Live 0xbf0ac000 (P)
ccmni 17214 0 - Live 0xbf0a3000 (P)
ccci 140504 15 ccmni, Live 0xbf075000 (P)
ccci_plat 125364 3 sec,ccmni,ccci, Live 0xbf04e000 (P)
mtk_drvb 5115 0 - Live 0xbf049000 (P)
mtklfb 14369 0 - Live 0xbf041000
pvrsrvkm 163655 91 mtklfb, Live 0xbf00d000
alps_core 2221 0 - Live 0xbf009000 (P)
aed 15882 3 - Live 0xbf000000 (P)
RAM: 512 MB (488 MB available)
System RAM: 488.000MB
mtkfb.0: 2.000MB
Flash: 8 GB Build-in (7.441 GB actual); 0.5 GB (0.490 GB actual)
mmcblk0: 7.441 GB
mtdblock: 0.018 GB
mtdblock1: 0.472 GB
Touch Screen for alps A606
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
Replacement Battery for alps A606
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
Cover Cases for alps A606
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
Find Similar devices | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |