1. Install SpecDevice
2. Run and decode your specs
3. Get your link (read more...)
General Specifications | |
---|---|
Manufacturer | alps |
Model | eidolon15_nand_gb2 |
Firmware | 4.1.1; eng.soft.1375948484; SDK10 |
CPU | 1 core; ARMv7 Processor rev 10 (v7l) |
Display | 800 x 480; DPI: 240; Evaluated Size: ٣٫٩" |
Touch screen | please, run touch screen test... |
GPU | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.7@810899 |
RAM | 256 MB (240 MB available) |
Flash | 8 GB (7.285 GB actual); 0.5 GB (0.472 GB actual) (see memory map tab) |
Communications | |
Phone | GSM, Dual SIM; Net: GPRS |
WiFi | lca_core; IEEE 802.11 b/g/n; MediaTek MT6628; AP Mode |
USB Host | Yes |
Bluetooth | Bluetooth 3.0+HS, 4.0 |
GPS | Yes |
Advanced Features | |
Front camera | Photo: 1.9 MP; Max: 1600x1200; Focus: infinity; Flash modes: on off torch |
Back camera | Photo: 1.9 MP; Max size: 1600x1200; Focus: infinity; No flash |
Sensors | ADXL345 3-axis Accelerometer (The Android Open Source Project); range: 0...٣٢٫٠٠٠; resolution: ٠٫٠٠٤ (٠٫٠١٢%); power: ٠٫١٣٠mA; |
CM3623 Proximity Sensor (Capella); range: 0...١٫٠٠٠; resolution: ١٫٠٠٠ (١٠٠٫٠٠٠%); power: ٠٫١٣٠mA; | |
CM3623 Light Sensor (Capella); range: 0...١٠٢٤٠٫٠٠٠; resolution: ١٫٠٠٠ (٠٫٠١٠%); power: ٠٫١٣٠mA; | |
Gravity Sensor (Google Inc.); range: 0...٣٢٫٠٠٠; resolution: ٠٫٠٠٤ (٠٫٠١٢%); power: ٠٫١٣٠mA; | |
Linear Acceleration Sensor (Google Inc.); range: 0...٣٢٫٠٠٠; resolution: ٠٫٠٠٤ (٠٫٠١٢%); power: ٠٫١٣٠mA; | |
Rotation Vector Sensor (Google Inc.); range: 0...١٫٠٠٠; resolution: ٠٫٠٠٠ (٠٫٠٠٠%); power: ٠٫١٣٠mA; | |
Vibrator | Yes |
Supported languages | 41; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Portuguese; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
Battery | Technology: Li-ion; Voltage: 3907 |
FM radio | Supported by chipset |
Owner's comment: | ze touch |
SD Version: | 1.1 5 |
KERNEL: Linux version 2.6.35.7 (soft@android) (gcc version 4.4.3 (GCC) ) #1 PREEMPT Thu Aug 8 15:54:24 CST 2013
CODENAME: REL
Mainboard: eidolon15_nand_gb2
BRAND: alps
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: eidolon15_nand_gb2
DISPLAY: ALPS.GB2.MP.V2.47
FINGERPRINT: alps/eidolon15_nand_gb2/eidolon15_nand_gb2:4.1.1/GRK39F/1375948484:user/test-keys
HARDWARE: mt6575
ID: GRK39F
TAGS: test-keys
Processor : ARMv7 Processor rev 10 (v7l)
BogoMIPS : 1998.84
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc09
CPU revision : 10
Hardware : MT6575
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_stream2
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<7>[ 6961.876208] [508:GTalkConnWorker] fork [3719:GTalkConnWorker]
<7>[ 6961.876282] [3719:GTalkConnWorker] set proc[3719] name: -> [close-XMPP-conn]
<6>[ 6961.905559] [WLAN] rfkill_set_block(blocked 1)
<6>[ 6961.905570] [WLAN] Power off
<3>[ 6961.905587] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(4) type(3) start
<4>[ 6961.905613] [STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<6>[ 6961.905661] src = COMBO_IF_UART, to enter deep idle? 0
<4>[ 6961.920400] [STP-PSM] [I]_stp_psm_do_wait: STP is waiting state for ACT, i=1
<6>[ 6961.920453] [WMT-DFT][I]hif_sdio_wifi_off:start!
<5>[ 6961.920471] [wlan] Remove wlan!
<5>[ 6961.920526] [wlan]
<1>[ 6961.920531] tx_thread should stop now...
<3>[ 6961.920540] [wlan] OID Timeout! Releasing pending OIDs ..
<5>[ 6961.920552] [wlan] mtk_sdiod stops
<7>[ 6961.920567] [378:tx_thread] exit
<5>[ 6961.920615] [wlan] mtk_sdiod stopped
<7>[ 6961.940833] [3718:dmesg] exit
<7>[ 6961.941048] [3718:dmesg] sig 17 to [3695:AsyncTask #1]
<6>[ 6961.960462] [wlan] QM: Enter qmFlushRxQueues()
<6>[ 6961.960844] [wlan] QM: Enter qmFlushTxQueues()
<5>[ 6961.960894] [wlan] Number of Stalled Packets = 0
<7>[ 6961.968231] [256:NativeDaemonCon] fork [3720:NativeDaemonCon]
<7>[ 6961.968279] [3720:NativeDaemonCon] set proc[3720] name: -> [Thread-215]
<7>[ 6961.971650] [3720:Thread-215] exit
<7>[ 6962.011076] [2929:Smack Packet Re] sig 13 to [2929:Smack Packet Re]
<7>[ 6962.014047] [2929:Smack Packet Re] exit
<7>[ 6962.139489] [3719:close-XMPP-conn] exit
<7>[ 6962.143144] [SYSRAM][EanbleSwitchBank]MFG to SYSRAM, SWITCH_BANK = 0x00000000, u4AllocatedTbl = 0x00000000
<7>[ 6962.143222] [SYSRAM][EanbleSwitchBank]SYSRAM to MFG, SWITCH_BANK = 0x00000007, u4AllocatedTbl = 0x00000000
<5>[ 6962.220405] [wlan] unregisterdev(0xc75d8000)
<6>[ 6962.220507] [WMT-DFT][I]hif_sdio_wifi_off:ok!
<7>[ 6962.220553] [307:ksdioirqd/mmc1] exit
<6>[ 6962.220674] [WMT-DFT][I]hif_sdio_wifi_off:sdio_release_irq() for wifi ok
<4>[ 6962.220693] mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[ 6962.220702] mtk_wcn_cmb_sdio_off (3)
<3>[ 6962.220714] msdc3 -> USR Suspend <- msdc_pm() : L<1206> PID
<6>[ 6962.220770] [WMT-DFT][I]hif_sdio_remove:start!
<6>[ 6962.220826] [WMT-DFT][I]hif_sdio_remove:sdio func(0xc7596dc0) is removed successfully!
<6>[ 6962.220924] mmc1: card 0001 removed
<3>[ 6962.240533] msdc3 -> save latch data<1> cmd<1> <- msdc_ops_set_ios() : L<2981> PID
<3>[ 6962.240552] msdc3 -> set mclk to 0 <- msdc_set_mclk() : L<644> PID
<3>[ 6962.240713] [WMT-CORE][I]opfunc_func_off:WMT-CORE:Fun(3) [POWER_OFF] and power down chip
<4>[ 6962.240738] [STP-PSM] [I]_stp_psm_is_redundant_active_op: redundant opId found, opId(1), preOpid(1)
<6>[ 6962.240765] [STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[ 6962.240778] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[ 6962.240792] [STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[ 6962.240800] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(1)
<4>[ 6962.240814] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[ 6962.240826] Flush type = 4 Rx Queue
<7>[ 6962.248783] [2928:Smack Packet Wr] exit
<3>[ 6962.260778] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(close_stp) result(0)
<3>[ 6962.260801] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, hw_pwr_off start
<3>[ 6962.260814] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, BGF_EINT IRQ unregistered and disabled
<3>[ 6962.260829] [WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 6962.260840] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, ALL_EINT IRQ unregistered and disabled
<3>[ 6962.260851] [WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 6962.260864] [WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[ 6962.260877] [WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<3>[ 6962.260888] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[ 6962.260898] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, hw_pwr_off finish
<3>[ 6962.260908] [WMT-CORE][W]opfunc_pwr_off:HW_PWR_OFF ok
<3>[ 6962.260923] [WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC OFF]status(b:0 f:0 g:0 w:0 lpbk:0 coredump:0 wmt:0 sd1:0 sd2:0 stp:0)
<6>[ 6962.260965] [STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[ 6962.260986] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(4) type(3) ok
<7>[ 6962.341933] [227:er.ServerThread] fork [3721:er.ServerThread]
<7>[ 6962.360458] [3721:er.ServerThread] set proc[3721] name: -> [Thread-216]
<7>[ 6962.366923] [399:WifiWatchdogThr] exit
<7>[ 6962.386477] [3721:Thread-216] exit
<6>[ 6962.387104] [WLAN] rfkill_set_block(blocked 0)
<6>[ 6962.387115] [WLAN] Power on
<3>[ 6962.387131] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[ 6962.387161] [STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[ 6962.387455] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[ 6962.387471] [WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(not defined)
<3>[ 6962.387481] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO185)
<3>[ 6962.387490] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(GPIO185)
<3>[ 6962.387498] [WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[ 6962.387507] [WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO72)
<3>[ 6962.387516] [WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(4)
<3>[ 6962.387526] [WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO60)
<3>[ 6962.387535] [WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(8)
<3>[ 6962.387544] [WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<3>[ 6962.387553] [WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[ 6962.387562] [WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[ 6962.387571] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[ 6962.387580] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[ 6962.387589] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[ 6962.387598] [WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_CK(GPIO56)
<3>[ 6962.387607] [WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_WS(GPIO57)
<3>[ 6962.387616] [WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_DAT(GPIO58)
<3>[ 6962.387625] [WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(GPIO118)
<3>[ 6962.387634] [WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(GPIO186)
<3>[ 6962.387644] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[ 6962.387655] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<3>[ 6962.387668] [WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 6962.387678] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[ 6962.387695] [WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 6962.387706] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[ 6962.590346] [WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[ 6962.590365] [WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<4>[ 6962.590547] [STP-PSM] [E]_stp_psm_notify_stp(1174):ERROR! Invalid Action!!
<4>[ 6962.590553]
<3>[ 6962.590574] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[ 6962.590587] [WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 6962.590597] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<4>[ 6962.590731] mt6575_get_bus_freq() return 192400
<3>[ 6962.590865] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[ 6962.590876] Flush type = 4 Rx Queue
<3>[ 6962.590996] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[ 6962.591010] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[ 6962.591022] [STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[ 6962.591031] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[ 6962.591040] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<6>[ 6962.591053] [STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[ 6962.591064] [STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[ 6962.591075] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[ 6962.591086] [STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[ 6962.596697] [WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6628)
<3>[ 6962.602289] [WMT-IC][I]mt6628_ver_check:MT6628: read hw_ver (hw version) (0x8b10)
<3>[ 6962.607897] [WMT-IC][I]mt6628_ver_check:MT6628: read fw_ver (rom version) (0x8b10)
<3>[ 6962.607911] [WMT-IC][I]mt6628_find_wmt_ic_info:found ic info(0x8b10) by full match! index:2
<3>[ 6962.607925] [WMT-IC][I]mt6628_ver_check:MT6628: wmt ic info: MT6628.E3 (0x8b10, WMTHWVER:2, patch_ext:_e2)
<3>[ 6962.607939] [WMT-CORE][I]wmt_core_hw_check:chip id(0x6628) ver_check ok
<3>[ 6962.618795] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[ 6962.618809] [WMT-IC][I]mt6628_sw_init:WMT-CORE: change baudrate(4000000) ok
<3>[ 6962.623451] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(srh_patch) result(0)
<3>[ 6962.623467] [WMT-IC][I]mt6628_patch_dwn:valid patch found: (/system/etc/firmware//mt6628_patch_e2_hdr.bin)
<3>[ 6962.624762] [WMT-IC][I]mt6628_patch_dwn:===========================================
<3>[ 6962.624776] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Built Time = 20121225172202a
<3>[ 6962.624788] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[ 6962.624798] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[ 6962.624807] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Ph Ver = 0x0010
<3>[ 6962.624817] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Platform = 1150
<3>[ 6962.624827] [WMT-IC][I]mt6628_patch_dwn:===========================================
<3>[ 6962.770189] [WMT-IC][I]mt6628_patch_dwn:wmt_core: patch dwn:0 frag(23, 320) ok
<3>[ 6962.770930] [WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf08174c)
<3>[ 6962.771927] [WMT-IC][I]mt6628_sw_init:init_coex ok
<6>[ 6962.775628] [STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[ 6962.775645] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[ 6962.775659] [STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[ 6962.775670] [WMT-IC][I]mt6628_sw_init:enable host STP-UART-FULL mode
<3>[ 6962.792233] [WMT-IC][I]mt6628_sw_init:co-clock disabled.
<3>[ 6962.793305] [WMT-IC][I]mt6628_sw_init:set fm mode (2) ok
<3>[ 6962.793316] [WMT-IC][I]mt6628_sw_init:disable mt662x firmware coredump
<6>[ 6962.793328] [STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[ 6962.793342] [STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[ 6962.793355] mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[ 6962.793362] board_sdio_ctrl force off before on
<6>[ 6962.793369] mtk_wcn_cmb_sdio_off (3)
<6>[ 6962.793414] mtk_wcn_cmb_sdio_on (3)
<3>[ 6962.793447] msdc3 -> USR Resume <- msdc_pm() : L<1231> PID
<3>[ 6962.794101] msdc3 -> sdio ops_get_cd<1> <- msdc_ops_get_cd() : L<3028> PID
<3>[ 6962.830556] msdc3 -> ================ <- msdc_set_mclk() : L<692> PID
<3>[ 6962.830572] msdc3 -> !!! Set<260KHz> Source<197000KHz> -> sclk<259KHz> DDR<0> mode<0> div<190> <- msdc_set_mclk() : L<694> PID
<3>[ 6962.830587] msdc3 -> ================ <- msdc_set_mclk() : L<695> PID
<3>[ 6962.850924] msdc3 -> XXX CMD<52> MSDC_INT_CMDTMO Arg<0x00000c00> <- msdc_irq() : L<3213>
<3>[ 6962.851521] msdc3 -> XXX CMD<52> MSDC_INT_CMDTMO Arg<0x80000c08> <- msdc_irq() : L<3213>
<3>[ 6962.855822] msdc3 -> XXX CMD<8> MSDC_INT_CMDTMO Arg<0x000001aa> <- msdc_irq() : L<3213>
<3>[ 6962.857168] msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1291> PID
<3>[ 6962.879876] msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<2973> PID
<3>[ 6962.879913] msdc3 -> ================ <- msdc_set_mclk() : L<692> PID
<3>[ 6962.879929] msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<694> PID
<3>[ 6962.879943] msdc3 -> ================ <- msdc_set_mclk() : L<695> PID
<6>[ 6962.880785] mmc1: new high speed SDIO card at address 0001
<6>[ 6962.881776] [WMT-DFT][I]hif_sdio_probe:start!
<6>[ 6962.881789] [WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x6628) num(0x1)
<6>[ 6962.881799] [WMT-DFT][I]hif_sdio_probe:card->info[0]: 6628
<6>[ 6962.881807] [WMT-DFT][I]hif_sdio_probe:card->info[1]: Combo
<6>[ 6962.881816] [WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[ 6962.881824] [WMT-DFT][I]hif_sdio_probe:card->info[3]:
<6>[ 6962.881907] [WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(520192)
<6>[ 6962.950334] [WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[ 6962.950442] [2:kthreadd] fork [3722:kthreadd]
<6>[ 6962.950474] [WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<5>[ 6962.950499] [wlan] net_device prDev(0xc75d8000) allocated
<5>[ 6962.951861] [wlan] Open FW image: WIFI_RAM_CODE done
<5>[ 6962.961818] [wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[ 6962.961967] [wlan] Virtual Address = d0ef2000 for COMMON MGMT MEMORY POOL.
<5>[ 6962.961981] [wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[ 6962.962048] [wlan] Virtual Address = d0ef5000 for SW_RFB_T.
<5>[ 6962.962058] [wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[ 6962.962106] [wlan] Virtual Address = d0efa000 for MSDU_INFO_T.
<6>[ 6962.962117] [wlan] wlanAdapterStart(): Acquiring LP-OWN
<6>[ 6962.980447] [wlan] Chip ID: 0x6628
<6>[ 6962.980461] [wlan] Revision ID: 0x0
<6>[ 6963.230343] yaffs: userdata sync do_checkpoint 0,gc_urgen 0
<6>[ 6963.230355] yaffs: userdata yaffs_FlushSuperBlock 0
<6>[ 6963.736333] [wlan] wlanAdapterStart(): Waiting for Ready bit..
<6>[ 6963.831193] [wlan] Ready bit asserted
<5>[ 6963.861663] [wlan] [wifi] wlan%d netif_carrier_off
<6>[ 6963.861680] [wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[ 6963.861750] [wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[ 6963.861826] [wlan] Domain: map=0, idx=0, code=0x0000
<7>[ 6963.862119] [2:kthreadd] fork [3723:kthreadd]
<5>[ 6963.862157] [wlan] tx_thread starts running...
<6>[ 6963.955998] [WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(6628) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[ 6963.956014] [WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[ 6963.956032] [WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 coredump:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[ 6963.956731] [STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<3>[ 6963.956768] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<4>[ 6963.957291] [STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<6>[ 6963.957787] [RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[ 6963.957808] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[ 6963.963010] [1:init] fork [3724:init]
<7>[ 6963.963731] [344:BinderThd_AP304] fork [3725:BinderThd_AP304]
<7>[ 6963.968339] [260:WifiService] fork [3726:WifiService]
<7>[ 6963.969222] [3724:init] set proc[3724] name: -> [logwrapper]
<7>[ 6963.970405] [3725:BinderThd_AP304] set proc[3725] name: -> [BinderThd_AP304]
<7>[ 6963.970686] [3726:WifiService] set proc[3726] name: -> [WifiMonitor]
<7>[ 6963.978043] [3724:logwrapper] fork [3727:logwrapper]
<7>[ 6963.988551] [3727:logwrapper] set proc[3727] name: -> [wpa_supplicant]
<7>[ 6964.003794] [227:er.ServerThread] fork [3728:er.ServerThread]
<7>[ 6964.005716] [260:WifiService] fork [3729:WifiService]
<7>[ 6964.005926] [3728:er.ServerThread] set proc[3728] name: -> [Thread-218]
<7>[ 6964.006961] [3728:Thread-218] exit
<7>[ 6964.007024] [3729:WifiService] set proc[3729] name: -> [WifiWatchdogThr]
<7>[ 6964.082435] [SYSRAM][EanbleSwitchBank]MFG to SYSRAM, SWITCH_BANK = 0x00000000, u4AllocatedTbl = 0x00000000
<7>[ 6964.085751] [SYSRAM][EanbleSwitchBank]SYSRAM to MFG, SWITCH_BANK = 0x00000007, u4AllocatedTbl = 0x00000000
<4>[ 6964.170334] 2015-02-14 19:06:55.917228 UTC; android time 2015-02-14 21:06:55.917228
<7>[ 6964.224470] [3730:AsyncTask #1] set proc[3730] name: -> [dmesg]
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GRK39F
ro.build.display.id=ALPS.GB2.MP.V2.47
ro.build.version.incremental=eng.soft.1375948484
ro.custom.build.version=P2000_V026
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=4.1.1
ro.build.date=Thu Aug 8 15:58:03 CST 2013
ro.build.date.utc=1375948683
ro.build.type=user
ro.build.user=soft
ro.build.host=android
ro.build.tags=test-keys
ro.product.model=eidolon15_nand_gb2
ro.product.brand=alps
ro.product.name=eidolon15_nand_gb2
ro.product.device=eidolon15_nand_gb2
ro.product.board=eidolon15_nand_gb2
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=alps
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=eidolon15_nand_gb2
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=eidolon15_nand_gb2-user 4.1.1 GRK39F eng.soft.1375948484 test-keys
ro.build.fingerprint=alps/eidolon15_nand_gb2/eidolon15_nand_gb2:4.1.1/GRK39F/1375948484:user/test-keys
ro.build.flavor=
persist.sys.timezone=Asia/Shanghai
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=ALPS.GB2.MP.V2.47
ro.mediatek.platform=MT6575
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.GB2.MP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
#
# ADDITIONAL_BUILD_PROPERTIES
#
fmradio.driver.chip=3
ro.sf.hwrotation=90
ril.current.share_modem=2
launcherplus.allappsgrid=2d
launcher2.allappsgrid=3d_20
curlockscreen=2
ro.mediatek.gemini_support=true
ro.mediatek.drm_support=true
mediatek.wlan.chip=MT6628
mediatek.wlan.module.postfix=_mt6628
ro.config.notification_sound=Voila.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.config.ringtone=Ring16.mp3
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
lca_core 2718 0 - Live 0xbf000000 (P)
pvrsrvkm 165086 43 mtklfb, Live 0xbf006000
mtklfb 14525 0 - Live 0xbf03d000
mtk_drvb 4403 0 - Live 0xbf047000 (P)
mtk_hif_sdio 17706 2 wlan_mt6628,mtk_stp_wmt, Live 0xbf04e000
mtk_stp_wmt 367221 7 wlan_mt6628,mtk_fm_priv,mtk_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf059000 (P)
mtk_stp_uart 21521 1 - Live 0xbf0c3000 (P)
mtk_stp_gps 37166 0 - Live 0xbf0ce000
mtk_stp_bt 39754 1 - Live 0xbf0dd000
mtk_fm_drv 97962 1 mtk_fm_priv, Live 0xbf0ec000
mtk_fm_priv 2427 0 - Live 0xbf10d000 (P)
wlan_mt6628 279970 0 - Live 0xbf113000 (P)
ccci_plat 102100 3 sec,ccmni,ccci, Live 0xbf170000 (P)
ccci 138785 15 ccmni, Live 0xbf192000 (P)
ccmni 16670 0 - Live 0xbf1c1000 (P)
mt6575_m4u 84190 4 - Live 0xbf1cc000 (P)
devinfo 756 0 - Live 0xbf1e9000 (P)
mt6575_vcodec_kernel_driver 23905 2 - Live 0xbf1ef000 (P)
sec 84741 0 - Live 0xbf1fc000 (P)
aed 17997 3 - Live 0xbf218000 (P)
RAM: 256 MB (240 MB available)
System RAM: 240.000MB
mtkfb.0: 6.000MB
Flash: 8 GB (7.285 GB actual); 0.5 GB (0.472 GB actual)
mmcblk0: 7.285 GB
mtdblock: 0.018 GB
mtdblock1: 0.472 GB
Touch Screen for alps eidolon15_nand_gb2
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm
$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
Replacement Battery for alps eidolon15_nand_gb2
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm
$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
Cover Cases for alps eidolon15_nand_gb2
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft
$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
Find Similar devices | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |