unknown MID Specification

3 Steps to publish Your specification here:

1. Install SpecDevice
2. Run and decode your specs
3. Get your link (read more...)

General
OS details
CPU info
GPU extensions
WiFi kernel messages
build.prop
Modules
Memory map

Similar device in database: Chinese SoftWinners MID A106

General Specifications
Manufacturer	unknown
Model	MID
Firmware	4.0.4; 20121226; SDK15
CPU	1 core; ARMv7 Processor rev 2 (v7l) exDroid; Max: 1200,0 MHz; Min: 300,0 MHz
Display	1024 x 768; DPI: 160; Evaluated Size: 8,0"
Touch screen	Multitouch 5 points
GPU	Mali-400 MP; ARM; OpenGL ES-CM 1.1; OpenGL ES 2.0
RAM	1024 MB (960 MB available)
Flash	16 GB Build-in (14.999 GB actual); 32 GB (29.723 GB actual)
Communications
Phone	GSM; Net: GPRS
WiFi	8192cu; IEEE 802.11 b/g/n; RealtekRTL8188/92; AP Mode
USB Host	Yes
Bluetooth	Yes
GPS	No
Advanced Features
Front camera	Photo: 1.9 MP; Max: 1600x1200; Focus: auto; No flash
Back camera	Photo: 0.3 MP; Max size: 640x480; Focus: auto; No flash
Sensors	MMA 3-axis Accelerometer (Freescale Semiconductor Inc.); range: 0...19,613; resolution: 0,467 (2,381%); power: 0,3mA;
Vibrator	Yes
Supported languages	40; Arabic; Bulgarian; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Vietnamese; Chinese
Battery	Technology: LiFe; Voltage: 3931
External USB Ethernet	Realtek 8150 based adapters; MCS7830 based adapters
SD Version:	1.1 5

KERNEL: Linux version 3.0.8+ (guohuaichao@brn-guohuaichao) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #138 PREEMPT Wed Dec 26 15:24:03 CST 2012
CODENAME: REL
Mainboard: crane
BRAND: softwinners
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: crane-a106
DISPLAY: a106_dblgt2005_3g_V1.1.7_20121226_r7918_c338c12
FINGERPRINT: softwinners/crane_a106/crane-a106:4.0.4/IMM76D/20121226:eng/test-keys
HARDWARE: sun4i
ID: IMM76D
TAGS: test-keys

Processor : ARMv7 Processor rev 2 (v7l)
BogoMIPS : 1001.88
Features : swp half thumb fastmult vfp edsp neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc08
CPU revision : 2
Hardware : sun4i
Revision : 0000
Serial : 048046975352484880758952162367cf

GL_OES_texture_npot
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_standard_derivatives
GL_OES_EGL_image
GL_OES_depth24
GL_ARM_rgba8
GL_ARM_mali_shader_binary
GL_OES_depth_texture
GL_OES_packed_depth_stencil
GL_EXT_texture_format_BGRA8888
GL_EXT_blend_minmax
GL_OES_EGL_image_external
GL_OES_EGL_sync
GL_OES_rgb8_rgba8
GL_EXT_multisampled_render_to_texture
GL_EXT_discard_framebuffer

<7>[ 4744.806720] sw_usb_enable_hcd: usbc_num = 2
<7>[ 4744.806737] WRN:L878(drivers/usb/host/ehci_sun4i.c):ERR: not support sw_usb_enable_ehci
<7>[ 4744.806747] rtw driver version=v3.4.2_3727.20120404
<7>[ 4744.806754] Build at: Dec 12 2012 11:21:39
<7>[ 4744.806761] ##########rtw_suspend_lock_init ###########
<7>[ 4744.806953] register rtw_netdev_ops to netdev_ops
<7>[ 4744.806966] rtw_wdev_alloc
<7>[ 4744.812312] CHIP TYPE: RTL8188C_8192C
<7>[ 4744.812333]
<7>[ 4744.812336] usb_endpoint_descriptor(0):
<7>[ 4744.812343] bLength=7
<7>[ 4744.812348] bDescriptorType=5
<7>[ 4744.812353] bEndpointAddress=81
<7>[ 4744.812358] wMaxPacketSize=200
<7>[ 4744.812363] bInterval=0
<7>[ 4744.812368] RT_usb_endpoint_is_bulk_in = 1
<7>[ 4744.812374]
<7>[ 4744.812377] usb_endpoint_descriptor(1):
<7>[ 4744.812382] bLength=7
<7>[ 4744.812386] bDescriptorType=5
<7>[ 4744.812391] bEndpointAddress=2
<7>[ 4744.812396] wMaxPacketSize=200
<7>[ 4744.812401] bInterval=0
<7>[ 4744.812406] RT_usb_endpoint_is_bulk_out = 2
<7>[ 4744.812411]
<7>[ 4744.812414] usb_endpoint_descriptor(2):
<7>[ 4744.812420] bLength=7
<7>[ 4744.812424] bDescriptorType=5
<7>[ 4744.812429] bEndpointAddress=3
<7>[ 4744.812434] wMaxPacketSize=200
<7>[ 4744.812438] bInterval=0
<7>[ 4744.812443] RT_usb_endpoint_is_bulk_out = 3
<7>[ 4744.812449]
<7>[ 4744.812451] usb_endpoint_descriptor(3):
<7>[ 4744.812457] bLength=7
<7>[ 4744.812461] bDescriptorType=5
<7>[ 4744.812466] bEndpointAddress=84
<7>[ 4744.812471] wMaxPacketSize=40
<7>[ 4744.812476] bInterval=1
<7>[ 4744.812481] RT_usb_endpoint_is_int_in = 4, Interval = 1
<7>[ 4744.812489] nr_endpoint=4, in_num=2, out_num=2
<7>[ 4744.812494]
<7>[ 4744.812498] USB_SPEED_HIGH
<7>[ 4744.812720] Chip Version ID: VERSION_NORMAL_UMC_CHIP_88C_B_CUT.
<7>[ 4744.812731] RF_Type is 3!!
<7>[ 4744.813087] EEPROM type is E-FUSE
<7>[ 4744.813095] ====> ReadAdapterInfo8192C
<7>[ 4744.976965] Boot from EFUSE, Autoload OK !
<7>[ 4745.126017] EEPROMVID = 0x0bda
<7>[ 4745.129113] EEPROMPID = 0x018a
<7>[ 4745.132214] EEPROMCustomerID : 0x00
<7>[ 4745.135729] EEPROMSubCustomerID: 0x00
<7>[ 4745.139412] RT_CustomerID: 0x00
<7>[ 4745.142618] _ReadMACAddress MAC Address from EFUSE = 00:09:00:11:23:4c
<7>[ 4745.149177] EEPROMRegulatory = 0x0
<7>[ 4745.152623] _ReadBoardType(0)
<7>[ 4745.155617] BT Coexistance = disable
<7>[ 4745.159225] RT_ChannelPlan: 0x0a
<7>[ 4745.162500] _ReadPSSetting...bHWPwrPindetect(0)-bHWPowerdown(10) ,bSupportRemoteWakeup(1)
<7>[ 4745.170720] ### PS params=> power_mgnt(1),usbss_enable(0) ###
<7>[ 4745.176576] ### AntDivCfg(0)
<7>[ 4745.179593] readAdapterInfo_8192CU(): REPLACEMENT = 1
<7>[ 4745.184831] <==== ReadAdapterInfo8192C in 370 ms
<7>[ 4745.191316] rtw_register_early_suspend
<7>[ 4745.195137]
<7>[ 4745.195142] padapter->pwrctrlpriv.bSupportRemoteWakeup~~~~~~
<7>[ 4745.202539]
<7>[ 4745.202542] padapter->pwrctrlpriv.bSupportRemoteWakeup~~~[1]~~~
<7>[ 4745.210469] rtw_macaddr_cfg MAC Address = 00:09:00:11:23:4c
<7>[ 4745.216245] MAC Address from pnetdev->dev_addr= 00:09:00:11:23:4c
<7>[ 4745.233123] bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0
<6>[ 4745.240786] usbcore: registered new interface driver rtl8192cu
<7>[ 4745.277389] rtw_android_priv_cmd: Android private cmd "BLOCK 1" on wlan0
<5>[ 4745.289080] init: starting `wpa_supplicant`
<6>[ 4745.297210] init: Created socket `/dev/socket/wpa_wlan0` with mode `660`, user `1010`, group `1010`
<7>[ 4746.502622] cfg80211_rtw_change_iface call netdev_open
<7>[ 4746.507788] +871x_drv - drv_open, bup=0
<7>[ 4746.532735] ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_UMC_B
<7>[ 4746.539106] FirmwareDownload92C accquire FW from embedded image
<7>[ 4746.563149] fw_ver=v80, fw_subver=0, sig=0x88c0
<7>[ 4746.655745] fw download ok!
<7>[ 4746.655760] Set RF Chip ID to RF_6052 and RF type to 1T1R.
<7>[ 4747.152469] IQK:Start!!!
<7>[ 4747.166211] Path A IQK Success!!
<7>[ 4747.181592] Path A IQK Success!!
<7>[ 4747.190258] IQK: final_candidate is 0
<7>[ 4747.194589] IQK: RegE94=106 RegE9C=f RegEA4=fa RegEAC=2 RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0
<7>[ 4747.194598] Path A IQ Calibration Success !
<7>[ 4747.330744] pdmpriv->TxPowerTrackControl = 1
<7>[ 4747.344981] MAC Address from REG_MACID = 00:09:00:11:23:4c
<7>[ 4747.344994] rtl8192cu_hal_init in 820ms
<7>[ 4747.345004] MAC Address = 00:09:00:11:23:4c
<7>[ 4747.379955] rtw_cfg80211_init_wiphy:rf_type=3
<7>[ 4747.384480] -871x_drv - drv_open, bup=1
<7>[ 4747.395718] cfg80211_rtw_change_iface, old_iftype=6, new_iftype=2
<7>[ 4747.396266] +871x_drv - drv_open, bup=1
<7>[ 4747.396278] -871x_drv - drv_open, bup=1
<7>[ 4747.398702] cfg80211_rtw_set_power_mgmt
<6>[ 4747.401021] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[ 4747.435258] cfg80211_rtw_flush_pmksa
<7>[ 4747.473804] cfg80211_rtw_change_station
<7>[ 4747.484481] cfg80211_rtw_change_station
<7>[ 4747.488401] cfg80211_rtw_change_station
<7>[ 4747.510447] rtw_android_priv_cmd: Android private cmd "P2P_DEV_ADDR" on wlan0
<7>[ 4747.536397] rtw_android_priv_cmd: Android private cmd "BLOCK 0" on wlan0
<7>[ 4747.656458] rtw_android_priv_cmd: Android private cmd "BTCOEXSCAN-STOP" on wlan0
<7>[ 4747.657019] rtw_android_priv_cmd: Android private cmd "RXFILTER-ADD 3" on wlan0
<7>[ 4747.701739] rtw_android_priv_cmd: Android private cmd "RXFILTER-START" on wlan0
<7>[ 4747.740505] rtw_android_priv_cmd: Android private cmd "RXFILTER-STOP" on wlan0
<7>[ 4747.749154] rtw_android_priv_cmd: Android private cmd "RXFILTER-REMOVE 2" on wlan0
<7>[ 4747.756962] rtw_android_priv_cmd: Android private cmd "RXFILTER-START" on wlan0
<7>[ 4747.765793] rtw_android_priv_cmd: Android private cmd "COUNTRY RU" on wlan0
<7>[ 4747.772823] rtw_set_country unknown country_code:RU
<7>[ 4747.778303] rtw_android_priv_cmd: Android private cmd "SETBAND 0" on wlan0
<7>[ 4747.798281] rtw_android_priv_cmd: Android private cmd "SCAN-ACTIVE" on wlan0
<7>[ 4747.864022] rtw_android_priv_cmd: Android private cmd "SCAN-PASSIVE" on wlan0

# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IMM76D
ro.build.display.id=a106_dblgt2005_3g_V1.1.7_20121226_r7918_c338c12
ro.build.version.incremental=20121226
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=2012�� 12�� 26�� 15:42:14 CST
ro.build.date.utc=1356507734
ro.build.type=eng
ro.build.user=guohuaichao
ro.build.host=brn-guohuaichao
ro.build.tags=test-keys
ro.product.model=MID
ro.product.brand=softwinners
ro.product.name=crane_a106
ro.product.device=crane-a106
ro.product.board=crane
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=unknown
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=exDroid
# ro.build.product is obsolete; use ro.product.device
ro.build.product=crane-a106
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=A106_V1.1.7_20121226_r7918_c338c12
ro.build.fingerprint=softwinners/crane_a106/crane-a106:4.0.4/IMM76D/20121226:eng/test-keys
ro.build.characteristics=tablet
# end build properties
# broncho tag,please don\'t modify
ro.broncho.id=A106_V1.1.7_20121226_r7918_c338c12
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=Ring_Synth_04.ogg
ro.config.notification_sound=pixiedust.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=256m
ro.kernel.android.checkjni=0
persist.sys.timezone=Asia/Shanghai
persist.sys.language=en
persist.sys.country=US
wifi.interface=wlan0
wifi.supplicant_scan_interval=15
debug.egl.hw=1
ro.display.switch=1
ro.opengles.version=131072
persist.sys.strictmode.visual=0
persist.sys.strictmode.disable=1
hwui.render_dirty_regions=false
persist.sampling_profiler=1
persist.sys.usb.config=mass_storage,adb
ro.property.tabletUI=true
ro.udisk.lable=CRANE
ro.product.firmware=1.5rc1
ro.broncho.MemorySize=0
ro.broncho.MOT=y
ro.broncho.GPS=n
ro.setupwizard.mode=OPTIONAL
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt

8192cu 575495 0 - Live 0xbf0fd000
dmard06 9014 0 - Live 0xbf0f0000
mma7660 6402 0 - Live 0xbf0e3000
rtl8150 8910 0 - Live 0xbf0dc000
mcs7830 6557 0 - Live 0xbf0d6000
qf9700 8513 0 - Live 0xbf0cf000
asix 22500 0 - Live 0xbf0c4000
sun4i_csi0 29432 0 - Live 0xbf0b8000
gt200535 30016 1 - Live 0xbf0ab000
gc0308 14998 1 - Live 0xbf0a3000
videobuf_dma_contig 5659 1 sun4i_csi0, Live 0xbf09e000
videobuf_core 18067 2 sun4i_csi0,videobuf_dma_contig, Live 0xbf094000
cedarx 11815 0 - Live 0xbf08d000
mali 130209 14 - Live 0xbf060000
ump 42202 15 mali, Live 0xbf04f000
sun4i_vibrator 2286 0 - Live 0xbf04b000
mic_keypad 2022 0 - Live 0xbf047000
ft5x_ts 46394 0 - Live 0xbf036000
gt813_827_828 12449 0 - Live 0xbf02e000
nt11003 8679 0 - Live 0xbf027000
es8388 4977 0 - Live 0xbf022000
nand 105401 8 - Live 0xbf000000

RAM: 1024 MB (960 MB available)

System RAM: 448.000MB
Mali Sdram: 64.000MB
System RAM: 512.000MB

Flash: 16 GB Build-in (14.999 GB actual); 32 GB (29.723 GB actual)

mmcblk0: 29.723 GB
nand: 14.999 GB

Find Similar devices
Same CPU:
Same Display resolution:
Same ro.build.description:

Link: Here I buy Chinese smartphones and tablets

Touch Screen for unknown MID

Replacement Battery for unknown MID

Cover Cases for unknown MID