1. Install SpecDevice
2. Run and decode your specs
3. Get your link (read more...)
General Specifications | |
---|---|
Manufacturer | alps |
Model | E8 |
Firmware | 4.0.3; eng.call2.1351044286; SDK15 |
CPU | 1 core; ARMv7 Processor rev 10 (v7l); Max: 1001.0 MHz; Min: 166.8 MHz |
Display | 800 x 480; DPI: 240; Evaluated Size: 3.9" |
Touch screen | Multitouch 5 points |
GPU | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.8@905891 |
RAM | 512 MB (484 MB available) |
Flash | 4 GB (3.721 GB actual); 0.5 GB (0.472 GB actual) (see memory map tab) |
Communications | |
Phone | GSM, Dual SIM; Net: HSDPA |
WiFi | wlan; IEEE 802.11 a/b/g/n; MediaTek MT6620; AP Mode |
USB Host | No |
Bluetooth | Bluetooth 4.0+HS |
GPS | Yes |
Advanced Features | |
Front camera | Photo: 1.9 MP; Max: 1600x1200; Focus: infinity; Flash modes: auto on off torch |
Back camera | Photo: 0.3 MP; Max size: 640x480; Focus: infinity; Flash modes: off |
Sensors | bma222 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0.004 (0.012%); power: 0.13mA; |
tmd2771 Proximity Sensor (Capella); range: 0...1; resolution: 1 (100%); power: 0.13mA; | |
tmd2771 Light Sensor (Capella); range: 0...10240; resolution: 1 (0.01%); power: 0.13mA; | |
Vibrator | Yes |
Supported languages | 43; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
Battery | Technology: Li-ion; Voltage: 3739 |
FM radio | 76 to 108MHz |
SD Version: | 1.1 5 |
KERNEL: Linux version 3.0.13 (gcc version 4.4.3 (GCC) ) #1 PREEMPT Wed Oct 24 10:04:28 CST 2012
CODENAME: REL
Mainboard: E8
BRAND: E8
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: simcom75_cu_ics
DISPLAY: E8_GNA5R_V1.00b11
FINGERPRINT: alps/simcom75_cu_ics/simcom75_cu_ics:4.0.3/IML74K/1351044286:user/test-keys
HARDWARE: mt6575
ID: IML74K
TAGS: test-keys
Processor : ARMv7 Processor rev 10 (v7l)
BogoMIPS : 1993.93
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc09
CPU revision : 10
Hardware : MT6575
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<7>[ 9857.721115] [20973:dmesg] exit
<7>[ 9857.721272] [20973:dmesg] sig 17 to [20965:AsyncTask #2]
<7>[ 9857.726643] [20931:netd] exit
<7>[ 9857.728457] [20930:Thread-1693] exit
<7>[ 9857.748110] [318:WifiStateMachin] fork err at pid
<7>[ 9857.748136] [318:WifiStateMachin] fork [20974:WifiStateMachin]
<7>[ 9857.749022] [20974:WifiStateMachin] set proc[20974] name: ->[Thread-885]
<7>[ 9857.756664] [263:er.ServerThread] fork err at pid
<7>[ 9857.756690] [263:er.ServerThread] fork [20975:er.ServerThread]
<6>[ 9857.789154] [WLAN] rfkill_set_block(blocked 0)
<6>[ 9857.789165] [WLAN] Power on
<3>[ 9857.789178] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[ 9857.789956] [STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[ 9857.789994] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[ 9857.791059] [WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(not defined)
<3>[ 9857.791807] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO12)
<3>[ 9857.792499] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(not defined)
<3>[ 9857.793279] [WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[ 9857.793973] [WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO13)
<3>[ 9857.794721] [WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(14)
<3>[ 9857.795468] [WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO15)
<7>[ 9857.801447] [20975:er.ServerThread] set proc[20975] name: ->[Thread-886]
<7>[ 9857.803278] [20975:Thread-886] exit
<3>[ 9857.803332] [WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(18)
<3>[ 9857.804083] [WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<3>[ 9857.804818] [WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[ 9857.805555] [WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[ 9857.806698] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[ 9857.810843] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[ 9857.811554] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[ 9857.812288] [WMT-PLAT][I]wmt_plat_dump_pin_conf:FM digital mode is not set, no need for I2S GPIOs
<3>[ 9857.813646] [WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(GPIO72)
<3>[ 9857.814387] [WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(GPIO185)
<3>[ 9857.815346] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[ 9857.817092] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<3>[ 9857.817923] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[ 9857.818706] [WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 9857.819590] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<7>[ 9857.898407] WQ_WARN: cpu:1, proc:kworker/u:1, dur: 10593000 > 8ms
<7>[ 9857.898444] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 9857.914846] WQ_WARN: cpu:1, proc:kworker/u:1, dur: 8976769 > 8ms
<7>[ 9857.914883] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 9857.930904] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 10764000 > 8ms
<7>[ 9857.930940] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 9857.947188] WQ_WARN: cpu:1, proc:kworker/u:1, dur: 11280692 > 8ms
<7>[ 9857.947219] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 9857.963920] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 11771385 > 8ms
<7>[ 9857.963955] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 9857.980377] WQ_WARN: cpu:1, proc:kworker/u:1, dur: 11814308 > 8ms
<7>[ 9857.980408] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 9857.996896] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 11589538 > 8ms
<7>[ 9857.996932] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 9858.013356] WQ_WARN: cpu:1, proc:kworker/u:1, dur: 11455308 > 8ms
<7>[ 9858.013391] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<3>[ 9858.026153] [WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[ 9858.026916] [WMT-PLAT][I]wmt_plat_i2s_ctrl:[MT6620]warnning:FM digital mode is not set, no I2S GPIO settings should be modified by combo driver
<3>[ 9858.028513] [WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<3>[ 9858.029465] [WMT-LIB][I]wmt_lib_ps_handler:MT6620 Not Ready, Dont Send Sleep/Wakeup Command
<4>[ 9858.030498] [STP-PSM] [E]_stp_psm_notify_stp(990):ERROR! Invalid Action!!
<4>[ 9858.030504]
<7>[ 9858.031578] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 13128769 > 8ms
<7>[ 9858.031610] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<3>[ 9858.031668] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[ 9858.032734] [WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 9858.033621] [WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 9858.034466] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<4>[ 9858.035567] mt6575_get_bus_freq() return 192400
<3>[ 9858.041287] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[ 9858.042030] Flush type = 4 Rx Queue
<3>[ 9858.042651] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[ 9858.043452] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[ 9858.043466] [STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[ 9858.044105] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[ 9858.044804] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[ 9858.045494] [STP-PSM] [I]_stp_psm_set_state: work_state = ACT --> ACT
<6>[ 9858.046366] [STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[ 9858.046378] [STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[ 9858.046388] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<7>[ 9858.047052] WQ_WARN: cpu:1, proc:kworker/u:1, dur: 10024769 > 8ms
<7>[ 9858.047087] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<3>[ 9858.054555] [WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6620)
<3>[ 9858.060874] [WMT-IC][I]mt6620_ver_check:MT6620: read hw_ver (hw version) (0x8a11)
<7>[ 9858.062911] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 9022000 > 8ms
<7>[ 9858.062945] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<3>[ 9858.071059] [WMT-IC][I]mt6620_ver_check:MT6620: read fw_ver (rom version) (0x8a10)
<3>[ 9858.072001] [WMT-IC][I]mt6620_find_wmt_ic_info:found ic info(0x8a11) by full match! index:3
<3>[ 9858.073039] [WMT-IC][I]mt6620_ver_check:MT6620: wmt ic info: MT6620.E4 (0x8a11, WMTHWVER:3, patch_ext:_e3)
<3>[ 9858.074242] [WMT-CORE][I]wmt_core_hw_check:chip id(0x6620) ver_check ok
<7>[ 9858.079418] WQ_WARN: cpu:1, proc:kworker/u:1, dur: 11533462 > 8ms
<7>[ 9858.079452] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<3>[ 9858.087438] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[ 9858.088316] [WMT-IC][I]mt6620_sw_init:WMT-CORE: change baudrate(4000000) ok
<3>[ 9858.090968] [WMT-IC][I]mt6620_update_patch_name:full firmware patch name: /system/etc/firmware/mt6620_patch_e3_hdr.bin
<3>[ 9858.092788] [WMT-IC][I]mt6620_patch_dwn:===========================================
<3>[ 9858.093738] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Built Time = 20120320180900
<3>[ 9858.094679] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[ 9858.095480] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<7>[ 9858.096376] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 11448462 > 8ms
<7>[ 9858.096404] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<3>[ 9858.096478] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Ph Ver = 0x001b
<3>[ 9858.097271] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Platform = 1212
<3>[ 9858.098072] [WMT-IC][I]mt6620_patch_dwn:===========================================
<7>[ 9858.112629] WQ_WARN: cpu:1, proc:kworker/u:1, dur: 10766154 > 8ms
<7>[ 9858.112658] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 9858.129868] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 12255693 > 8ms
<7>[ 9858.129898] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 9858.145475] WQ_WARN: cpu:1, proc:kworker/u:1, dur: 10621769 > 8ms
<7>[ 9858.145505] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 9858.161998] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 11568615 > 8ms
<7>[ 9858.162027] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 9858.178525] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 12639770 > 8ms
<7>[ 9858.178560] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 9858.195027] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 12623000 > 8ms
<7>[ 9858.195060] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<3>[ 9858.423929] [WMT-IC][I]mt6620_patch_dwn:wmt_core: patch dwn:0 frag(43, 752) ok
<3>[ 9858.424898] [WMT-IC][I]mt6620_sw_init:Not to check the patch validity
<3>[ 9858.426061] [WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf142e40)
<3>[ 9858.430666] [WMT-IC][I]mt6620_sw_init:init_coex ok
<6>[ 9858.431654] [STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[ 9858.431666] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<3>[ 9858.431677] [WMT-IC][I]mt6620_sw_init:enable host STP-UART-FULL mode
<3>[ 9858.448080] [WMT-IC][I]mt6620_sw_init:set fm mode (2) ok
<6>[ 9858.448959] [STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[ 9858.448974] [STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[ 9858.448986] mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[ 9858.449657] board_sdio_ctrl force off before on
<6>[ 9858.449664] mtk_wcn_cmb_sdio_off (3)
<6>[ 9858.449704] mtk_wcn_cmb_sdio_on (3)
<3>[ 9858.449738] msdc3 -> USR Resume <- msdc_pm() : L<1454> PID
<3>[ 9858.466308] msdc3 -> ================ <- msdc_set_mclk() : L<760> PID
<3>[ 9858.467337] msdc3 -> !!! Set<400KHz> Source<197000KHz> -> sclk<397KHz> DDR<0> mode<0> div<124> <- msdc_set_mclk() : L<762> PID
<3>[ 9858.468979] msdc3 -> ================ <- msdc_set_mclk() : L<763> PID
<3>[ 9858.491623] msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1515> PID
<3>[ 9858.516901] msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<3442> PID
<3>[ 9858.518070] msdc3 -> ================ <- msdc_set_mclk() : L<760> PID
<3>[ 9858.519094] msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<762> PID
<3>[ 9858.520759] msdc3 -> ================ <- msdc_set_mclk() : L<763> PID
<6>[ 9858.523344] mmc1: new high speed SDIO card at address 0001
<6>[ 9858.525553] [WMT-DFT][I]hif_sdio_probe:start!
<6>[ 9858.525568] [WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x20a) num(0x1)
<6>[ 9858.525579] [WMT-DFT][I]hif_sdio_probe:card->info[0]: MediaTek MT6620 Wireless Combo Chip
<6>[ 9858.525589] [WMT-DFT][I]hif_sdio_probe:card->info[1]:
<6>[ 9858.525596] [WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[ 9858.525687] [WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(520192)
<7>[ 9858.525711] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 74075538 > 8ms
<7>[ 9858.525728] work: mmc_rescan+0x0/0x370
<6>[ 9858.606129] [WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[ 9858.606222] [2:kthreadd] fork err at pid
<7>[ 9858.606242] [2:kthreadd] fork [20976:kthreadd]
<6>[ 9858.606265] [WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<5>[ 9858.606295] [wlan] net_device prDev(0xcca8d000) allocated
<5>[ 9858.607948] [wlan] Open FW image: WIFI_RAM_CODE done
<5>[ 9858.608970] [wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[ 9858.610146] [wlan] Virtual Address = e52ea000 for COMMON MGMT MEMORY POOL.
<5>[ 9858.610990] [wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[ 9858.611663] [wlan] Virtual Address = e53df000 for SW_RFB_T.
<5>[ 9858.612343] [wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[ 9858.613032] [wlan] Virtual Address = e53e3000 for MSDU_INFO_T.
<6>[ 9858.613753] [wlan] wlanAdapterStart(): Acquiring LP-OWN
<4>[ 9858.617255] [RT_MONITOR]WARNNING [20976:ksdioirqd/mmc1] SET NOT ALLOW RT Prio [1] for proc [20976:ksdioirqd/mmc1]
<4>[ 9858.618531] Backtrace:
<4>[ 9858.618863] [
<4>[ 9858.619905] r7:00000001 r6:00000000 r5:d518a000 r4:cc0e9c00
<4>[ 9858.620620] [
<4>[ 9858.621990] [
<4>[ 9858.623199] [
<4>[ 9858.624347] [
<4>[ 9858.625373] [
<4>[ 9858.626408] r7:00000013 r6:c0088df8 r5:c00a0478 r4:dd3d9d78
<6>[ 9858.646163] [wlan] Chip ID: 0x6620
<6>[ 9858.646174] [wlan] Revision ID: 0x1
<7>[ 9858.974626] [20451:Smack Packet Wr] exit
<6>[ 9859.296782] [wlan] wlanAdapterStart(): Waiting for Ready bit..
<7>[ 9859.463398] [20957:com.specdevice] exit
<6>[ 9859.536171] [wlan] Ready bit asserted
<5>[ 9859.572890] [wlan] [wifi] wlan%d netif_carrier_off
<6>[ 9859.573480] [wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[ 9859.573550] [wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[ 9859.573607] [wlan] Domain: map=0, idx=0, code=0x0000
<7>[ 9859.575590] [2:kthreadd] fork err at pid
<7>[ 9859.575613] [2:kthreadd] fork [20977:kthreadd]
<5>[ 9859.577364] [wlan] tx_thread starts running...
<6>[ 9859.579030] [WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(20a) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[ 9859.579045] [WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[ 9859.579063] [WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[ 9859.581066] [STP-PSM] [I]_stp_psm_enable: PSM MODE Enable==============================>
<4>[ 9859.581075]
[STP-PSM] [I]_stp_psm_dump_active_q: Active op list:++
<4>[ 9859.582851] [STP-PSM] [I]_stp_psm_dump_active_q: STP_OPID_PSM_WAKEUP
<4>[ 9859.583641] [STP-PSM] [I]_stp_psm_dump_active_q: Active op list:--
<4>[ 9859.590949] [STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<4>[ 9859.592002] [STP-PSM] [I]_stp_psm_notify_wmt_wakeup_wq: OPID(1) type(0) bRet(1)
<4>[ 9859.592008]
<4>[ 9859.593101] [STP-PSM] [I]_stp_psm_do_wait: +Total waits for ACT takes 0 msec
<4>[ 9859.593985] [STP-PSM] [I]_stp_psm_enable: PSM MODE Enable<=============================
<4>[ 9859.593992]
<3>[ 9859.595391] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<7>[ 9859.598552] [20974:Thread-885] exit
<7>[ 9859.606156] yaffs: yaffs: userdata sync do_checkpoint 0,gc_urgent 0
<7>[ 9859.606168] yaffs: yaffs: userdata yaffs_FlushSuperBlock 0
<7>[ 9859.609228] [13595:kworker/u:2] fork err at pid
<7>[ 9859.609252] [13595:kworker/u:2] fork [20978:kworker/u:2]
<7>[ 9859.609470] [20978:kworker/u:2] fork err at pid
<7>[ 9859.609490] [20978:kworker/u:2] fork [20979:kworker/u:2]
<7>[ 9859.609529] [20979:kworker/u:2] exit
<7>[ 9859.609556] [20979:kworker/u:2] sig 17 to [20978:kworker/u:2]
<7>[ 9859.609588] [20978:kworker/u:2] exit
<6>[ 9859.610051] [RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[ 9859.610073] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[ 9859.626683] [1:init] fork err at pid
<7>[ 9859.626708] [1:init] fork [20980:init]
<7>[ 9859.627512] [318:WifiStateMachin] fork err at pid
<7>[ 9859.627536] [318:WifiStateMachin] fork [20981:WifiStateMachin]
<7>[ 9859.627822] WQ_WARN: cpu:0, proc:kworker/0:2, dur: 17666846 > 8ms
<7>[ 9859.627892] work: wlanSetMulticastListWorkQueue+0x0/0x1f4 [wlan]
<7>[ 9859.627934] [20981:WifiStateMachin] set proc[20981] name: ->[WifiMonitor]
<7>[ 9859.629854] [20980:init] set proc[20980] name: ->[logwrapper]
<7>[ 9859.632017] [20980:logwrapper] fork err at pid
<7>[ 9859.632048] [20980:logwrapper] fork [20982:logwrapper]
<7>[ 9859.633557] [20982:logwrapper] set proc[20982] name: ->[wpa_supplicant]
<5>[ 9859.706348] [wlan] N=0 closed
<5>[ 9859.706714] [wlan] EVENT-ROAMING ABORT: Current Time = 9325110
<5>[ 9859.707483] [wlan] [13] TRANSITION: [0] -> [0]
<6>[ 9859.709900] [wlan] NAF=0,0,0
<6>[ 9859.709914] [wlan] NAF=0,0,0
<5>[ 9859.867218] [wlan] [13] TRANSITION: [0] -> [2]
<5>[ 9860.175918] [wlan] [13] TRANSITION: [2] -> [0]
<6>[ 9860.186214] [wlan] NAF=0,0,0
<7>[ 9860.198996] [263:er.ServerThread] fork err at pid
<7>[ 9860.199021] [263:er.ServerThread] fork [20983:er.ServerThread]
<7>[ 9860.202418] [20983:er.ServerThread] set proc[20983] name: ->[NotificationPla]
<7>[ 9860.214556] [20983:NotificationPla] fork err at pid
<7>[ 9860.214580] [20983:NotificationPla] fork [20984:NotificationPla]
<7>[ 9860.218651] [20984:NotificationPla] set proc[20984] name: ->[Thread-889]
<7>[ 9860.327435] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 9720462 > 8ms
<7>[ 9860.327465] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 9860.344156] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 11494539 > 8ms
<7>[ 9860.344191] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 9860.371687] [19793:e.process.gapps] fork err at pid
<7>[ 9860.371712] [19793:e.process.gapps] fork [20985:e.process.gapps]
<0>[ 9860.374038] [LED]button-backlight:0
<4>[ 9860.374503] mt65xx_leds_set_cust: set brightness, name:button-backlight, mode:3, level:0
<0>[ 9860.375502] [LED]PMIC#0:0
<6>[ 9860.375835] [Power/PMIC] [hwBacklightKPLEDTurnOff]...........
<7>[ 9860.384648] [20985:e.process.gapps] set proc[20985] name: ->[AsyncTask #4]
<7>[ 9860.410065] WQ_WARN: cpu:1, proc:kworker/u:3, dur: 12508231 > 8ms
<7>[ 9860.410094] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 9860.485668] [13630:Binder Thread #] fork err at pid
<7>[ 9860.485691] [13630:Binder Thread #] fork [20986:Binder Thread #]
<7>[ 9860.486567] [20986:Binder Thread #] set proc[20986] name: ->[TimedEventQueue]
<7>[ 9860.492292] WQ_WARN: cpu:1, proc:kworker/u:3, dur: 11480077 > 8ms
<7>[ 9860.492330] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 9860.502050] [20986:TimedEventQueue] fork err at pid
<7>[ 9860.502076] [20986:TimedEventQueue] fork [20987:TimedEventQueue]
<7>[ 9860.502141] [20986:TimedEventQueue] fork err at pid
<7>[ 9860.502158] [20986:TimedEventQueue] fork [20988:TimedEventQueue]
<7>[ 9860.502626] [20986:TimedEventQueue] fork err at pid
<7>[ 9860.502648] [20986:TimedEventQueue] fork [20989:TimedEventQueue]
<7>[ 9860.503209] [20986:TimedEventQueue] fork err at pid
<7>[ 9860.503231] [20986:TimedEventQueue] fork [20990:TimedEventQueue]
<7>[ 9860.511041] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 11723692 > 8ms
<7>[ 9860.511072] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 9860.520556] [18939:ndroid.settings] fork err at pid
<7>[ 9860.520581] [18939:ndroid.settings] fork [20991:ndroid.settings]
<7>[ 9860.522656] [20990:TimedEventQueue] set proc[20990] name: ->[VorbisTocThread]
<7>[ 9860.522812] [20990:VorbisTocThread] exit
<7>[ 9860.522898] [20989:TimedEventQueue] set proc[20989] name: ->[OMXCallbackDisp]
<7>[ 9860.522963] [20991:ndroid.settings] set proc[20991] name: ->[IntentService[A]
<7>[ 9860.523607] [20988:TimedEventQueue] set proc[20988] name: ->[MtkOmxAudioDec]
<7>[ 9860.526322] [20987:TimedEventQueue] set proc[20987] name: ->[MtkOmxAudioCmd]
<7>[ 9860.537931] [12251:Binder Thread #] fork err at pid
<7>[ 9860.537962] [12251:Binder Thread #] fork [20992:Binder Thread #]
<7>[ 9860.540839] [20983:NotificationPla] exit
<7>[ 9860.541786] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 10983384 > 8ms
<7>[ 9860.541817] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 9860.556562] [20991:IntentService[A] exit
<7>[ 9860.558227] WQ_WARN: cpu:1, proc:kworker/u:3, dur: 9751077 > 8ms
<7>[ 9860.558265] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 9860.569741] [20992:Binder Thread #] set proc[20992] name: ->[AudioTrackThrea]
<7>[ 9860.574823] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 11083077 > 8ms
<7>[ 9860.576169] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 9860.578878] [20400:com.mx.browser] fork err at pid
<7>[ 9860.578911] [20400:com.mx.browser] fork [20993:com.mx.browser]
<7>[ 9860.586557] [20993:com.mx.browser] set proc[20993] name: ->[MxAsyncTask #5]
<7>[ 9860.607843] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 11107769 > 8ms
<7>[ 9860.607874] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<5>[ 9860.615090] [Sound] !! AudDrv START_DL1_STREAM, AFE(2),AFEp(1)
<7>[ 9860.615809] [SYSRAM][CheckClock]u4AllocatedTbl = 0x00000001, EnableClk = 1
<5>[ 9860.615845] [Sound] -Aud START_DL1_STREAM AFE(3),AFEp(1)
<5>[ 9860.617547] [Sound] AudDrv_write m_first_write =0
<5>[ 9860.618101] [Sound] aud_top =0 Aud_AFE_Clk_cntr = 1 Afe_Mem_Pwr_on = 1 Aud_ANA_Clk_cntr = 0
<7>[ 9860.657407] WQ_WARN: cpu:1, proc:kworker/u:1, dur: 9984077 > 8ms
<7>[ 9860.657443] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 9860.673926] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 9167692 > 8ms
<7>[ 9860.673957] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 9860.707172] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 11270385 > 8ms
<7>[ 9860.707202] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 9860.718464] [18939:ndroid.settings] fork err at pid
<7>[ 9860.718489] [18939:ndroid.settings] fork [20994:ndroid.settings]
<7>[ 9860.723676] WQ_WARN: cpu:1, proc:kworker/u:1, dur: 11339769 > 8ms
<7>[ 9860.723707] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 9860.741337] WQ_WARN: cpu:1, proc:kworker/u:1, dur: 11781539 > 8ms
<7>[ 9860.741369] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 9860.753502] [20994:ndroid.settings] set proc[20994] name: ->[IntentService[A]
<7>[ 9860.756630] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 9454693 > 8ms
<7>[ 9860.756660] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 9860.773063] WQ_WARN: cpu:1, proc:kworker/u:1, dur: 9252000 > 8ms
<7>[ 9860.773094] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 9860.783094] [20994:IntentService[A] exit
<7>[ 9860.789521] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 8958385 > 8ms
<7>[ 9860.789551] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 9860.823915] WQ_WARN: cpu:1, proc:kworker/u:1, dur: 11803846 > 8ms
<7>[ 9860.823947] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 9860.826636] [20965:AsyncTask #2] fork err at pid
<7>[ 9860.826669] [20965:AsyncTask #2] fork [20995:AsyncTask #2]
<7>[ 9860.839808] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 10043538 > 8ms
<7>[ 9860.839839] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 9860.855510] WQ_WARN: cpu:1, proc:kworker/u:3, dur: 10413154 > 8ms
<7>[ 9860.855541] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 9860.872994] WQ_WARN: cpu:1, proc:kworker/u:3, dur: 12859770 > 8ms
<7>[ 9860.873032] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 9860.888581] WQ_WARN: cpu:1, proc:kworker/u:1, dur: 8848692 > 8ms
<7>[ 9860.888611] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<4>[ 9860.927517] 2013-09-27 19:39:05.775920 UTC; android time 2013-09-27 21:39:05.775920
<7>[ 9860.957822] [20995:AsyncTask #2] set proc[20995] name: ->[dmesg]
<7>[ 9860.979310] [20985:AsyncTask #4] fork err at pid
<7>[ 9860.979342] [20985:AsyncTask #4] fork [20996:AsyncTask #4]
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IML74K
ro.build.display.id=E8_GNA5R_V1.00b11
ro.build.hardware.display.id=MT000_V1.03_PCB
ro.build.version.incremental=eng.call2.1351044286
ro.custom.build.version=1351044286
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.3
ro.build.date=2012年 10月 24日 星期三 10:06:57 CST
ro.build.date.utc=1351044417
ro.build.type=user
ro.build.user=call2
ro.build.host=call2-srv2
ro.build.tags=test-keys
ro.product.model=E8
ro.product.brand=E8
ro.product.name=E8
ro.product.device=simcom75_cu_ics
ro.product.board=E8
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=alps
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=simcom75_cu_ics
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=simcom75_cu_ics-user 4.0.3 IML74K eng.call2.1351044286 test-keys
ro.build.fingerprint=alps/simcom75_cu_ics/simcom75_cu_ics:4.0.3/IML74K/1351044286:user/test-keys
ro.build.flavor=
ro.build.characteristics=default
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=E8_GNA5R_V1.00_b02
ro.mediatek.platform=MT6575
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.ICS.MP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=128m
# Encrypt phone function
ro.crypto.tmpfs_options=mode=0771,uid=1000,gid=1000
ro.crypto.fs_type=ext4
ro.crypto.fs_real_blkdev=/emmc@usrdata
ro.crypto.fs_mnt_point=/data
ro.crypto.fs_options=noauto_da_alloc
ro.crypto.fs_flags=0x00000406
# audio
ro.camera.sound.forced=0
ro.audio.silent=0
# USB Config Type
ro.sys.usb.storage.type=mtp,mass_storage
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.sf.hwrotation=180
ril.current.share_modem=2
launcherplus.allappsgrid=2d
launcher2.allappsgrid=3d_20
curlockscreen=2
ro.mediatek.gemini_support=true
drm.service.enabled=true
persist.radio.fd.counter=20
persist.radio.fd.off.counter=20
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.config.ringtone=Backroad.ogg
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
wlan 285360 0 - Live 0xbf1f9000 (P)
cfg80211 122425 0 - Live 0xbf1d0000
mtk_fm_priv 8909 0 - Live 0xbf1ca000 (P)
mt6620_fm_drv 110874 1 mtk_fm_priv, Live 0xbf1a2000
mtk_stp_bt 39718 1 - Live 0xbf195000
mtk_stp_gps 37190 0 - Live 0xbf188000
mtk_stp_uart 21669 1 - Live 0xbf17f000 (P)
mtk_stp_wmt 343310 7 wlan,mtk_fm_priv,mt6620_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf11e000 (P)
mtk_hif_sdio 18042 2 wlan,mtk_stp_wmt, Live 0xbf115000
devinfo 748 0 - Live 0xbf111000 (P)
sec 109563 0 - Live 0xbf0f0000 (P)
mt6575_vcodec_kernel_driver 23817 2 - Live 0xbf0e5000 (P)
mt6575_m4u 108821 8 - Live 0xbf0c1000 (P)
ccmni 17214 0 - Live 0xbf0b8000 (P)
ccci 139276 15 ccmni, Live 0xbf08a000 (P)
ccci_plat 125364 3 sec,ccmni,ccci, Live 0xbf063000 (P)
mtk_drvb 5115 0 - Live 0xbf05e000 (P)
mtklfb 23522 0 - Live 0xbf054000
pvrsrvkm 232835 77 mtklfb, Live 0xbf00d000
alps_core 2221 0 - Live 0xbf009000 (P)
aed 15834 3 - Live 0xbf000000 (P)
RAM: 512 MB (484 MB available)
System RAM: 484.000MB
mtkfb.0: 6.000MB
Flash: 4 GB (3.721 GB actual); 0.5 GB (0.472 GB actual)
mmcblk0: 3.721 GB
mtdblock: 0.018 GB
mtdblock1: 0.472 GB
Touch Screen for alps E8
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
Replacement Battery for alps E8
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
Cover Cases for alps E8
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
Find Similar devices | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |