unknown TF-MID701G 规格

一般信息
操作系统的详细信息
CPU信息
图形处理器细节
WiFi内核信息
build.prop
的内核模块
存储器映射

一般规格
生产厂家	unknown
型号	TF-MID701G
Android版	4.0.4; 20121122; SDK15
中央处理单元	1 core; ARMv7 Processor rev 2 (v7l) exDroid; Max: 1200,0 MHz; Min: 300,0 MHz
显示	1024 x 600; DPI: 160; Evaluated Size: 7,4"
触摸屏	Multitouch 5 points
图形处理器	Mali-400 MP; ARM; OpenGL ES-CM 1.1; OpenGL ES 2.0
内存RAM	1024 MB (960 MB available)
快闪记忆体	8 GB Build-in (7.407 GB actual); 8 GB (7.515 GB actual)
沟通
电话	None
WiFi	8192cu; IEEE 802.11 b/g/n; RealtekRTL8188/92; AP Mode
USB主机	Yes
蓝牙	Yes
全球定位系统	Yes
高级功能
前置摄像头	Photo: 1.9 MP; Max: 1600x1200; Focus: auto; No flash
背照相机	No
传感器	MMA 3-axis Accelerometer (Freescale Semiconductor Inc.); range: 0...19,613; resolution: 0,467 (2,381%); power: 0,3mA;
震动模式	Yes
支持的语言	40; Arabic; Bulgarian; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Vietnamese; Chinese
电池	Technology: LiFe; Voltage: 3969
External USB Ethernet	Realtek 8150 based adapters; MCS7830 based adapters
SD Version:	1.1 7

KERNEL: Linux version 3.0.8+ (lyl@brn-lyl) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #14 PREEMPT Thu Nov 22 16:30:15 CST 2012
CODENAME: REL
Mainboard: crane
BRAND: TELEFUNKEN
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: crane-a088
DISPLAY: TF-MID701G 20121122
FINGERPRINT: softwinners/crane_a088/crane-a088:4.0.4/IMM76D/20121122:eng/test-keys
HARDWARE: sun4i
ID: IMM76D
TAGS: test-keys

Processor : ARMv7 Processor rev 2 (v7l)
BogoMIPS : 1001.88
Features : swp half thumb fastmult vfp edsp neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc08
CPU revision : 2
Hardware : sun4i
Revision : 0000
Serial : 04411a7555544848807771501623674c

GL_OES_texture_npot
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_standard_derivatives
GL_OES_EGL_image
GL_OES_depth24
GL_ARM_rgba8
GL_ARM_mali_shader_binary
GL_OES_depth_texture
GL_OES_packed_depth_stencil
GL_EXT_texture_format_BGRA8888
GL_EXT_blend_minmax
GL_OES_EGL_image_external
GL_OES_EGL_sync
GL_OES_rgb8_rgba8
GL_EXT_multisampled_render_to_texture
GL_EXT_discard_framebuffer

<6>[ 7938.960184] usb 3-1: reset high speed USB device number 2 using sw-ehci
<7>[ 7939.121750] -r871xu_dev_remove, done
<7>[ 7939.121902] -rtw_drv_halt
<7>[ 7939.121910] sw_usb_disable_hcd: usbc_num = 2
<7>[ 7939.121918] [sw-ehci2]: sw_usb_disable_ehci
<7>[ 7939.121929] [sw-ehci2]: remove, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0xc087b018
<6>[ 7939.121942] sw-ehci sw-ehci.2: remove, state 1
<6>[ 7939.121968] usb usb3: USB disconnect, device number 1
<6>[ 7939.121977] usb 3-1: USB disconnect, device number 2
<6>[ 7939.163833] sw-ehci sw-ehci.2: USB bus 3 deregistered
<7>[ 7939.163854] [sw-ehci2]: Set USB Power OFF
<7>[ 7939.163864] [sw-ehci2]: close clock
<6>[ 7939.703575] init: waitpid returned pid 7174, status = 00000000
<3>[ 7939.709436] init: untracked pid 7174 exited
<7>[ 7940.670901] sw_usb_enable_hcd: usbc_num = 2
<7>[ 7940.670914] [sw-ehci2]: sw_usb_enable_ehci
<7>[ 7940.670972] [sw-ehci2]: probe, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0xc087b018
<7>[ 7940.670991] [sw-ehci2]: open clock
<7>[ 7940.720929] [sw-ehci2]: Set USB Power ON
<6>[ 7940.726592] sw-ehci sw-ehci.2: SW USB2.0 `Enhanced` Host Controller (EHCI) Driver
<6>[ 7940.736088] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 3
<6>[ 7940.746265] sw-ehci sw-ehci.2: irq 40, io mem 0xf1c1c000
<6>[ 7940.773132] sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
<7>[ 7940.778628] ehci_irq: port change detect
<6>[ 7940.785655] hub 3-0:1.0: USB hub found
<6>[ 7940.785691] hub 3-0:1.0: 1 port detected
<7>[ 7940.786833] rtw driver version=v3.4.2_3727.20120404
<7>[ 7940.786843] Build at: Nov 1 2012 19:11:46
<7>[ 7940.786850] ##########rtw_suspend_lock_init ###########
<6>[ 7940.787766] usbcore: registered new interface driver rtl8192cu
<7>[ 7940.883949] battery vol change: 77->76
<6>[ 7941.100493] usb 3-1: new high speed USB device number 2 using sw-ehci
<7>[ 7941.287452] register rtw_netdev_ops to netdev_ops
<7>[ 7941.299720] rtw_wdev_alloc
<7>[ 7941.310733] CHIP TYPE: RTL8188C_8192C
<7>[ 7941.338684]
<7>[ 7941.338691] usb_endpoint_descriptor(0):
<7>[ 7941.362172] bLength=7
<7>[ 7941.375651] bDescriptorType=5
<7>[ 7941.382076] bEndpointAddress=81
<7>[ 7941.382088] wMaxPacketSize=200
<7>[ 7941.382093] bInterval=0
<7>[ 7941.382098] RT_usb_endpoint_is_bulk_in = 1
<7>[ 7941.382105]
<7>[ 7941.382108] usb_endpoint_descriptor(1):
<7>[ 7941.382114] bLength=7
<7>[ 7941.382118] bDescriptorType=5
<7>[ 7941.382123] bEndpointAddress=2
<7>[ 7941.382128] wMaxPacketSize=200
<7>[ 7941.382132] bInterval=0
<7>[ 7941.382137] RT_usb_endpoint_is_bulk_out = 2
<7>[ 7941.382143]
<7>[ 7941.382146] usb_endpoint_descriptor(2):
<7>[ 7941.382151] bLength=7
<7>[ 7941.382156] bDescriptorType=5
<7>[ 7941.382160] bEndpointAddress=3
<7>[ 7941.382165] wMaxPacketSize=200
<7>[ 7941.382170] bInterval=0
<7>[ 7941.382175] RT_usb_endpoint_is_bulk_out = 3
<7>[ 7941.382180]
<7>[ 7941.382183] usb_endpoint_descriptor(3):
<7>[ 7941.382188] bLength=7
<7>[ 7941.382193] bDescriptorType=5
<7>[ 7941.382198] bEndpointAddress=84
<7>[ 7941.382203] wMaxPacketSize=40
<7>[ 7941.382207] bInterval=1
<7>[ 7941.382212] RT_usb_endpoint_is_int_in = 4, Interval = 1
<7>[ 7941.382220] nr_endpoint=4, in_num=2, out_num=2
<7>[ 7941.382225]
<7>[ 7941.382229] USB_SPEED_HIGH
<7>[ 7941.382371] Chip Version ID: VERSION_NORMAL_UMC_CHIP_88C_B_CUT.
<7>[ 7941.382381] RF_Type is 3!!
<7>[ 7941.383250] EEPROM type is E-FUSE
<7>[ 7941.383260] ====> ReadAdapterInfo8192C
<7>[ 7941.383397] Boot from EFUSE, Autoload OK !
<7>[ 7941.799990] EEPROMVID = 0x0bda
<7>[ 7941.799999] EEPROMPID = 0x018a
<7>[ 7941.800075] EEPROMCustomerID : 0x00
<7>[ 7941.800084] EEPROMSubCustomerID: 0x00
<7>[ 7941.800090] RT_CustomerID: 0x00
<7>[ 7941.800101] _ReadMACAddress MAC Address from EFUSE = 00:40:10:b0:7b:4a
<7>[ 7941.800114] EEPROMRegulatory = 0x0
<7>[ 7941.800121] _ReadBoardType(0)
<7>[ 7941.800129] BT Coexistance = disable
<7>[ 7941.800136] RT_ChannelPlan: 0x0a
<7>[ 7941.800144] _ReadPSSetting...bHWPwrPindetect(0)-bHWPowerdown(10) ,bSupportRemoteWakeup(1)
<7>[ 7941.800154] ### PS params=> power_mgnt(1),usbss_enable(0) ###
<7>[ 7941.800161] ### AntDivCfg(0)
<7>[ 7941.800166] readAdapterInfo_8192CU(): REPLACEMENT = 1
<7>[ 7941.800176] <==== ReadAdapterInfo8192C in 420 ms
<7>[ 7941.801362] rtw_register_early_suspend
<7>[ 7941.801431]
<7>[ 7941.801435] padapter->pwrctrlpriv.bSupportRemoteWakeup~~~~~~
<7>[ 7941.801442]
<7>[ 7941.801445] padapter->pwrctrlpriv.bSupportRemoteWakeup~~~[1]~~~
<7>[ 7941.801473] rtw_macaddr_cfg MAC Address = 00:40:10:b0:7b:4a
<7>[ 7941.801483] MAC Address from pnetdev->dev_addr= 00:40:10:b0:7b:4a
<7>[ 7941.908923] bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0
<7>[ 7942.005299] rtw_android_priv_cmd: Android private cmd "BLOCK 1" on wlan0
<5>[ 7942.011480] init: starting `wpa_supplicant`
<6>[ 7942.028057] init: Created socket `/dev/socket/wpa_wlan0` with mode `660`, user `1010`, group `1010`
<7>[ 7942.082948] cfg80211_rtw_change_iface call netdev_open
<7>[ 7942.098435] +871x_drv - drv_open, bup=0
<7>[ 7942.107642] ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_UMC_B
<7>[ 7942.134081] FirmwareDownload92C accquire FW from embedded image
<7>[ 7942.150146] fw_ver=v80, fw_subver=0, sig=0x88c0
<7>[ 7942.199027] fw download ok!
<7>[ 7942.202610] Set RF Chip ID to RF_6052 and RF type to 1T1R.
<7>[ 7942.650118] IQK:Start!!!
<7>[ 7942.663616] Path A IQK Success!!
<7>[ 7942.681368] Path A IQK Success!!
<7>[ 7942.693502] IQK: final_candidate is 0
<7>[ 7942.693518] IQK: RegE94=105 RegE9C=d RegEA4=fd RegEAC=5 RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0
<7>[ 7942.693525] Path A IQ Calibration Success !
<7>[ 7942.834006] pdmpriv->TxPowerTrackControl = 1
<7>[ 7942.848998] MAC Address from REG_MACID = 00:40:10:b0:7b:4a
<7>[ 7942.865831] rtl8192cu_hal_init in 770ms
<7>[ 7942.878805] MAC Address = 00:40:10:b0:7b:4a
<7>[ 7942.909405] rtw_cfg80211_init_wiphy:rf_type=3
<7>[ 7942.913894] -871x_drv - drv_open, bup=1
<7>[ 7942.923196] cfg80211_rtw_change_iface, old_iftype=6, new_iftype=2
<7>[ 7942.942960] +871x_drv - drv_open, bup=1
<7>[ 7942.952124] -871x_drv - drv_open, bup=1
<7>[ 7942.963660] cfg80211_rtw_set_power_mgmt
<6>[ 7942.981234] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[ 7942.985988] cfg80211_rtw_flush_pmksa
<7>[ 7943.030389] cfg80211_rtw_change_station
<7>[ 7943.034539] cfg80211_rtw_change_station
<7>[ 7943.043579] cfg80211_rtw_change_station
<7>[ 7943.065095] rtw_android_priv_cmd: Android private cmd "P2P_DEV_ADDR" on wlan0
<7>[ 7943.112495] rtw_android_priv_cmd: Android private cmd "BLOCK 0" on wlan0
<6>[ 7943.375257] init: waitpid returned pid 7197, status = 00000000
<3>[ 7943.383735] init: untracked pid 7197 exited
<7>[ 7943.481091] rtw_android_priv_cmd: Android private cmd "BTCOEXSCAN-STOP" on wlan0
<7>[ 7943.523716] rtw_android_priv_cmd: Android private cmd "RXFILTER-ADD 3" on wlan0
<7>[ 7943.553507] rtw_android_priv_cmd: Android private cmd "RXFILTER-START" on wlan0
<7>[ 7943.600644] rtw_android_priv_cmd: Android private cmd "RXFILTER-STOP" on wlan0
<7>[ 7943.632913] rtw_android_priv_cmd: Android private cmd "RXFILTER-REMOVE 2" on wlan0
<7>[ 7943.653545] rtw_android_priv_cmd: Android private cmd "RXFILTER-START" on wlan0
<7>[ 7943.672964] rtw_android_priv_cmd: Android private cmd "COUNTRY CN" on wlan0
<7>[ 7943.693634] rtw_android_priv_cmd: Android private cmd "SETBAND 0" on wlan0
<7>[ 7943.708500] rtw_android_priv_cmd: Android private cmd "SCAN-ACTIVE" on wlan0
<7>[ 7943.718818] rtw_android_priv_cmd: Android private cmd "SCAN-PASSIVE" on wlan0
<7>[ 7943.800499] --ttyS1---->serial8250_do_set_termios : 1 ,lcr = 0x93 cval = 0x13, lsr 0x60, iir 0x1, usr 0x6 cnt 0
<7>[ 7943.810042] --ttyS1---->serial8250_do_set_termios : 2 ,lcr = 0x13 cval = 0x13, lsr 0x60, iir 0x1, usr 0x6 usr_back 0x6 cnt 0
<7>[ 7944.065456] cfg80211_rtw_change_station

# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IMM76D
ro.build.display.id=TF-MID701G 20121122
ro.build.version.incremental=20121122
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=2012年 11月 22日星期四 16:33:31 CST
ro.build.date.utc=1353573211
ro.build.type=eng
ro.build.user=lyl
ro.build.host=brn-lyl
ro.build.tags=test-keys
ro.product.model=TF-MID701G
ro.product.brand=TELEFUNKEN
ro.product.name=crane_a088
ro.product.device=crane-a088
ro.product.board=crane
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=unknown
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=exDroid
# ro.build.product is obsolete; use ro.product.device
ro.build.product=crane-a088
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=A088_V1.1.1_20121122_r597+80_1e6c60d
ro.build.fingerprint=softwinners/crane_a088/crane-a088:4.0.4/IMM76D/20121122:eng/test-keys
ro.build.characteristics=tablet
# end build properties
# broncho tag,please don't modify
ro.broncho.id=A088_V1.1.1_20121122_r597+80_1e6c60d
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=Ring_Synth_04.ogg
ro.config.notification_sound=pixiedust.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=256m
ro.kernel.android.checkjni=0
persist.sys.timezone=Asia/Shanghai
persist.sys.language=zh
persist.sys.country=CN
wifi.interface=wlan0
wifi.supplicant_scan_interval=15
debug.egl.hw=1
ro.display.switch=1
ro.opengles.version=131072
persist.sys.strictmode.visual=0
persist.sys.strictmode.disable=1
hwui.render_dirty_regions=false
persist.sampling_profiler=1
persist.sys.usb.config=mass_storage,adb
ro.property.tabletUI=true
ro.udisk.lable=MID
ro.product.firmware=1.5rc1
ro.broncho.MOT=y
ro.broncho.GPS=n
ro.setupwizard.mode=OPTIONAL
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt

8192cu 575495 0 - Live 0xbf0fb000
dmard06 9014 0 - Live 0xbf0f7000
mma7660 6402 0 - Live 0xbf0ea000
rtl8150 8910 0 - Live 0xbf0e3000
mcs7830 6557 0 - Live 0xbf0dd000
qf9700 8513 0 - Live 0xbf0d6000
asix 22500 0 - Live 0xbf0cb000
sun4i_csi0 29432 0 - Live 0xbf0ba000
gt2005 16006 0 - Live 0xbf0b2000
gc2015 16131 0 - Live 0xbf0aa000
gc0308 14986 1 - Live 0xbf0a2000
videobuf_dma_contig 5659 1 sun4i_csi0, Live 0xbf09d000
videobuf_core 18067 2 sun4i_csi0,videobuf_dma_contig, Live 0xbf093000
cedarx 11815 0 - Live 0xbf08c000
mali 130257 24 - Live 0xbf05f000
ump 42242 25 mali, Live 0xbf04e000
sun4i_vibrator 2286 0 - Live 0xbf04a000
mic_keypad 2022 0 - Live 0xbf046000
ft5x_ts 46394 0 - Live 0xbf035000
es8388 4977 0 - Live 0xbf022000
nand 105401 8 - Live 0xbf000000

RAM: 1024 MB (960 MB available)

System RAM: 448.000MB
Mali Sdram: 64.000MB
System RAM: 512.000MB

Flash: 8 GB Build-in (7.407 GB actual); 8 GB (7.515 GB actual)

mmcblk0: 7.515 GB
nand: 7.407 GB

Find Similar devices
Same CPU:
Same Display resolution:
Same ro.build.description:

触摸屏为 unknown TF-MID701G

新电池 unknown TF-MID701G

占地面积 unknown TF-MID701G