1. Установить SpecDevice
2. Запустить, сформируется спецификация
3. Скопировать ссылку (подробнее...)
Основные характеристики | |
---|---|
Производитель | alps |
Модель | e958 |
Версия Andriod | 4.1.1; eng.sw01.1365564678; SDK15 |
Процессор | 2 cores; ARMv7 Processor rev 0 (v7l); Max: 1001,0 MHz; Min: 250,2 MHz |
Дисплей | 800 x 480; DPI: 240; Evaluated Size: 3,9" |
Сенсорный экран | Multitouch 2 points |
Графический ускоритель | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.8@905891 |
ОЗУ | 512 MB (486 MB available) |
Память | 4 GB (3.666 GB actual); 8 GB (7.501 GB actual) (см. вкладку "Память") |
Связь | |
Телефон | GSM; Net: EDGE |
WiFi | wlan_mt6628; IEEE 802.11 b/g/n; MediaTek MT6628; AP Mode |
USB Host | No |
Bluetooth | Bluetooth 3.0+HS, 4.0 |
GPS | Yes |
Установленные компоненты | |
Главная камера | Photo: 1.9 MP; Max: 1600x1200; Focus: infinity; Flash modes: on off torch |
Доп. камера | Photo: 4.9 MP; Max size: 2560x1920; Focus: infinity; No flash |
Датчики | yamaha530 3-axis Magnetic Field sensor (Aichi Steel); range: 0...600; resolution: 0,002 (0%); power: 0,25mA; |
bma222 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; | |
tmd2771 Proximity Sensor (Capella); range: 0...1; resolution: 1 (100%); power: 0,13mA; | |
tmd2771 Light Sensor (Capella); range: 0...10240; resolution: 1 (0,01%); power: 0,13mA; | |
Вибратор | Yes |
Языки | 43; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
Аккумулятор | Technology: Li-ion; Voltage: 3786 |
FM radio | Supported by chipset |
Owner's comment: | Uain e958 |
SD Version: | 1.1 5 |
KERNEL: Linux version 3.0.13 (sw01@work01-pc) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Wed Apr 10 11:31:07 CST 2013
CODENAME: REL
Mainboard: e958
BRAND: alps
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: e958
DISPLAY: ALPS.ICS2.MP.V1.3
FINGERPRINT: alps/e958/e958:4.1.1/IMM76D/1365564678:user/test-keys
HARDWARE: mt6577
ID: IMM76D
TAGS: test-keys
Processor : ARMv7 Processor rev 0 (v7l)
processor : 0
BogoMIPS : 1993.93
processor : 1
BogoMIPS : 2000.48
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc09
CPU revision : 0
Hardware : MT6577
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<7>[ 1575.929943] (1)[4249:dmesg] exit
<7>[ 1575.930160] (1)[4249:dmesg] sig 17 to [4244:AsyncTask #2]
<7>[ 1575.968666] (1)[349:WifiStateMachin] fork [4250:WifiStateMachin]
<7>[ 1575.969639] (1)[4250:WifiStateMachin] set proc[4250] name: ->[loadDriverThrea]
<6>[ 1575.984469] (1)[WLAN] rfkill_set_block(blocked 0)
<6>[ 1575.984483] (1)[WLAN] Power on
<3>[ 1575.984500] (1)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[ 1575.984524] (1)[STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[ 1575.984587] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[ 1575.984600] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(not defined)
<3>[ 1575.984611] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO122)
<3>[ 1575.984621] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(not defined)
<3>[ 1575.984631] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[ 1575.984641] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO15)
<3>[ 1575.984651] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(18)
<3>[ 1575.984661] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO17)
<3>[ 1575.984671] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(17)
<3>[ 1575.984682] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<3>[ 1575.984692] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[ 1575.984702] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[ 1575.984711] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[ 1575.984721] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[ 1575.984731] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[ 1575.984741] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_CK(GPIO56)
<3>[ 1575.984751] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_WS(GPIO57)
<3>[ 1575.984761] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_DAT(GPIO58)
<3>[ 1575.984771] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(GPIO206)
<3>[ 1575.984781] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(GPIO112)
<3>[ 1575.984791] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[ 1575.984804] (1)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<3>[ 1575.984816] (1)[WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 1575.984827] (1)[WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[ 1575.984845] (1)[WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 1575.984859] (1)[WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<7>[ 1575.994103] (1)[307:er.ServerThread] fork [4251:er.ServerThread]
<7>[ 1575.996784] (1)[4251:er.ServerThread] set proc[4251] name: ->[Thread-345]
<7>[ 1575.999203] (0)[4251:Thread-345] exit
<7>[ 1576.014283] (0)WQ_WARN: cpu:0, proc:kworker/0:1, [thermal_zone_device_check+0x0/0x18]dur: 310178692 > 15ms
<3>[ 1576.194046] (0)[WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[ 1576.194068] (0)[WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<4>[ 1576.194249] (0)[STP-PSM] [E]_stp_psm_notify_stp(1147):ERROR! Invalid Action!!
<4>[ 1576.194255] (0)
<3>[ 1576.194281] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[ 1576.194295] (0)[WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 1576.194306] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<4>[ 1576.194499] (0)mtk_get_bus_freq() return 260000
<3>[ 1576.194655] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[ 1576.194667] (0)Flush type = 4 Rx Queue
<3>[ 1576.194800] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[ 1576.194816] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[ 1576.194828] (0)[STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[ 1576.194838] (0)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[ 1576.194849] (0)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<6>[ 1576.194864] (0)[STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[ 1576.194874] (0)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[ 1576.194885] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[ 1576.194896] (0)[STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[ 1576.200497] (0)[WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6628)
<3>[ 1576.206090] (0)[WMT-IC][I]mt6628_ver_check:MT6628: read hw_ver (hw version) (0x8b10)
<3>[ 1576.211678] (0)[WMT-IC][I]mt6628_ver_check:MT6628: read fw_ver (rom version) (0x8b10)
<3>[ 1576.211692] (0)[WMT-IC][I]mt6628_find_wmt_ic_info:found ic info(0x8b10) by full match! index:2
<3>[ 1576.211707] (0)[WMT-IC][I]mt6628_ver_check:MT6628: wmt ic info: MT6628.E3 (0x8b10, WMTHWVER:2, patch_ext:_e2)
<3>[ 1576.211721] (0)[WMT-CORE][I]wmt_core_hw_check:chip id(0x6628) ver_check ok
<3>[ 1576.222690] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[ 1576.222707] (0)[WMT-IC][I]mt6628_sw_init:WMT-CORE: change baudrate(4000000) ok
<3>[ 1576.231435] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(srh_patch) result(0)
<3>[ 1576.231453] (0)[WMT-IC][I]mt6628_patch_dwn:valid patch found: (/system/etc/firmware//mt6628_patch_e2_hdr.bin)
<3>[ 1576.232001] (0)[WMT-IC][I]mt6628_patch_dwn:===========================================
<3>[ 1576.232015] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Built Time = 20120727130622a
<3>[ 1576.232027] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[ 1576.232038] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[ 1576.232048] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Ph Ver = 0x0010
<3>[ 1576.232059] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Platform = 1226
<3>[ 1576.232069] (0)[WMT-IC][I]mt6628_patch_dwn:===========================================
<3>[ 1576.365929] (0)[WMT-IC][I]mt6628_patch_dwn:wmt_core: patch dwn:0 frag(21, 472) ok
<3>[ 1576.366650] (0)[WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf14aa80)
<3>[ 1576.367642] (0)[WMT-IC][I]mt6628_sw_init:init_coex ok
<6>[ 1576.368401] (0)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[ 1576.368413] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[ 1576.368426] (0)[STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[ 1576.368436] (0)[WMT-IC][I]mt6628_sw_init:enable host STP-UART-FULL mode
<3>[ 1576.386068] (0)[WMT-IC][I]mt6628_sw_init:co-clock disabled.
<3>[ 1576.387860] (0)[WMT-IC][I]mt6628_sw_init:set fm mode (2) ok
<3>[ 1576.387917] (0)[WMT-IC][I]mt6628_sw_init:disable mt662x firmware coredump
<6>[ 1576.387935] (0)[STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[ 1576.387953] (0)[STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[ 1576.387971] (0)mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[ 1576.387982] (0)board_sdio_ctrl force off before on
<6>[ 1576.387992] (0)mtk_wcn_cmb_sdio_off (3)
<5>[ 1576.388119] (0)[Power/clkmgr] [freq_meter] data = 15494, freq = 196 MHz
<5>[ 1576.388226] (0)[Power/clkmgr] [freq_meter] data = 15494, freq = 196 MHz
<6>[ 1576.388253] (0)mtk_wcn_cmb_sdio_on (3)
<5>[ 1576.388370] (0)[Power/clkmgr] [freq_meter] data = 15495, freq = 196 MHz
<3>[ 1576.388395] (0)msdc3 -> USR Resume <- msdc_pm() : L<1691> PID
<3>[ 1576.404284] (0)msdc3 -> ================ <- msdc_set_mclk() : L<948> PID
<3>[ 1576.404314] (0)msdc3 -> !!! Set<400KHz> Source<197000KHz> -> sclk<397KHz> DDR<0> mode<0> div<124> <- msdc_set_mclk() : L<950> PID
<3>[ 1576.404335] (0)msdc3 -> ================ <- msdc_set_mclk() : L<951> PID
<3>[ 1576.431175] (0)msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1761> PID
<3>[ 1576.448462] (0)msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<4075> PID
<3>[ 1576.448519] (0)msdc3 -> ================ <- msdc_set_mclk() : L<948> PID
<3>[ 1576.448552] (0)msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<950> PID
<3>[ 1576.448582] (0)msdc3 -> ================ <- msdc_set_mclk() : L<951> PID
<6>[ 1576.450610] (0)mmc2: new high speed SDIO card at address 0001
<6>[ 1576.453226] (0)[WMT-DFT][I]hif_sdio_probe:start!
<6>[ 1576.453251] (0)[WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x6628) num(0x1)
<6>[ 1576.453271] (0)[WMT-DFT][I]hif_sdio_probe:card->info[0]: 6628
<6>[ 1576.453288] (0)[WMT-DFT][I]hif_sdio_probe:card->info[1]: Combo
<6>[ 1576.453305] (0)[WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[ 1576.453321] (0)[WMT-DFT][I]hif_sdio_probe:card->info[3]:
<6>[ 1576.453526] (0)[WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(524288)
<7>[ 1576.453590] (0)WQ_WARN: cpu:4, proc:kworker/u:0, [mmc_rescan+0x0/0x324]dur: 63903077 > 15ms
<1>[ 1576.464027] (0)[FM_NTC | MAIN]timer --->lock, cnt=0, pid=0
<1>[ 1576.464052] (0)[FM_NTC | MAIN]timer <---unlock, cnt=1, pid=0
<1>[ 1576.464093] (0)[FM_NTC | MAIN]rds_data --->lock, cnt=0, pid=32
<1>[ 1576.464105] (0)[FM_NTC | MAIN]rds_data <---unlock, cnt=1, pid=32
<6>[ 1576.544117] (0)[WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[ 1576.544488] (1)[2:kthreadd] fork [4252:kthreadd]
<6>[ 1576.544549] (0)[WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<5>[ 1576.544643] (0)[wlan] net_device prDev(0xdcb8a000) allocated
<4>[ 1576.545396] (0)[RT_MONITOR]WARNNING [4252:ksdioirqd/mmc2] SET NOT ALLOW RT Prio [1] for proc [4252:ksdioirqd/mmc2]
<5>[ 1576.555724] (0)[wlan] Open FW image: WIFI_RAM_CODE done
<5>[ 1576.563257] (0)[wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[ 1576.563424] (0)[wlan] Virtual Address = e1cd7000 for COMMON MGMT MEMORY POOL.
<5>[ 1576.563482] (0)[wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[ 1576.563562] (0)[wlan] Virtual Address = e1cd9000 for SW_RFB_T.
<5>[ 1576.563615] (0)[wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[ 1576.563693] (0)[wlan] Virtual Address = e1cdd000 for MSDU_INFO_T.
<6>[ 1576.563746] (0)[wlan] wlanAdapterStart(): Acquiring LP-OWN
<6>[ 1576.574274] (0)[wlan] Chip ID: 0x6628
<6>[ 1576.574323] (0)[wlan] Revision ID: 0x0
<7>[ 1577.203895] (1)[1327:Smack Packet Wr] exit
<6>[ 1577.321078] (0)[wlan] wlanAdapterStart(): Waiting for Ready bit..
<7>[ 1577.324058] (0)WQ_WARN: cpu:0, proc:kworker/0:1, [thermal_zone_device_check+0x0/0x18]dur: 310020077 > 15ms
<6>[ 1577.374270] (0)[wlan] Ready bit asserted
<5>[ 1577.421346] (0)[wlan] RF CAL FAIL = (0),BB CAL FAIL = (0)
<5>[ 1577.421603] (0)[wlan] [wifi] wlan%d netif_carrier_off
<6>[ 1577.421622] (0)[wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[ 1577.421667] (0)[wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[ 1577.421754] (0)[wlan] Domain: map=0, idx=1, code=0x0000
<7>[ 1577.422573] (0)[2:kthreadd] fork [4253:kthreadd]
<5>[ 1577.423180] (1)[wlan] tx_thread starts running...
<6>[ 1577.438744] (0)[WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(6628) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[ 1577.438761] (0)[WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[ 1577.438784] (0)[WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 coredump:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[ 1577.438844] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<3>[ 1577.438887] (0)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<4>[ 1577.439115] (0)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<7>[ 1577.441213] (1)[4250:loadDriverThrea] exit
<4>[ 1577.444066] (1)[cpu-0:thread:61] 2013-06-24 13:49:47.271290 UTC; android time 2013-06-24 10:49:47.271290
<4>[ 1577.444085] (0)[cpu-0:thread:60] 2013-06-24 13:49:47.271293 UTC; android time 2013-06-24 10:49:47.271293
<4>[ 1577.444097] (0)[WDK], local_bit:0x0, cpu:0
<4>[ 1577.444103] (0)[WDK]: kick External WDT
<4>[ 1577.444110] (0)[WDK], local_bit:0x1, cpu:0, check bit0x:3
<4>[ 1577.444116] (0)[WDK]: cpu:0, kick local wdt
<4>[ 1577.444126] (1)[WDK], local_bit:0x1, cpu:1
<4>[ 1577.444134] (0)WDT mpcore_wdt_keepalive:cpu-0: count:325000000. prescale:0, mpcore_margin:25,TWD_WDOG_LOAD:135f1b40
<4>[ 1577.444146] (0)WDT mpcore_wdt_start:cpu-0,control: 0x7, count:0x135f1b3c, load:0x135f1b40
<4>[ 1577.444156] (1)[WDK]: kick External WDT
<4>[ 1577.444165] (1)[WDK], local_bit:0x3, cpu:1, check bit0x:3
<4>[ 1577.444174] (1)[WDK]: cpu:1, kick local wdt
<4>[ 1577.444187] (1)WDT mpcore_wdt_keepalive:cpu-1: count:325000000. prescale:0, mpcore_margin:25,TWD_WDOG_LOAD:135f1b41
<4>[ 1577.444201] (1)WDT mpcore_wdt_start:cpu-1,control: 0x7, count:0x135f1b3d, load:0x135f1b41
<7>[ 1577.450796] (0)[2:kthreadd] fork [4254:kthreadd]
<6>[ 1577.451469] (1)[RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[ 1577.451495] (1)ADDRCONF(NETDEV_UP): wlan0: link is not ready
<5>[ 1577.464598] (1)init: starting `wpa_supplicant`
<7>[ 1577.464808] (1)[1:init] fork [4255:init]
<7>[ 1577.465732] (1)[349:WifiStateMachin] fork [4256:WifiStateMachin]
<7>[ 1577.465781] (0)[4256:WifiStateMachin] set proc[4256] name: ->[WifiMonitor]
<7>[ 1577.465980] (1)WQ_WARN: cpu:1, proc:kworker/1:1, [wlanSetMulticastListWorkQueue+0x0/0x1f4 [wlan_mt6628]]dur: 15248461 > 15ms
<7>[ 1577.466991] (0)[4255:init] set proc[4255] name: ->[logwrapper]
<7>[ 1577.468961] (0)[4255:logwrapper] fork [4257:logwrapper]
<7>[ 1577.474901] (1)[4257:logwrapper] set proc[4257] name: ->[wpa_supplicant]
<5>[ 1577.644552] (0)[wlan] N=0 closed
<5>[ 1577.644582] (0)[wlan] EVENT-ROAMING ABORT: Current Time = 1242840
<5>[ 1577.644598] (0)[wlan] [13] TRANSITION: [0] -> [0]
<6>[ 1577.645070] (0)[wlan] NAF=0,0,0
<6>[ 1577.645250] (0)[wlan] NAF=0,0,0
<5>[ 1577.918551] (0)[wlan] [13] TRANSITION: [0] -> [2]
<5>[ 1578.138813] (0)[Power/Alarm] alarm 0 set 1372082087.963000000
<5>[ 1578.141088] (0)[wlan] CMD set_band=0
<5>[ 1578.203641] (0)[wlan] [13] TRANSITION: [2] -> [0]
<6>[ 1578.205226] (0)[wlan] NAF=0,0,0
<5>[ 1578.206204] (0)[wlan] N=0 closed
<5>[ 1578.206228] (0)[wlan] EVENT-ROAMING ABORT: Current Time = 1243400
<5>[ 1578.206242] (0)[wlan] [13] TRANSITION: [0] -> [0]
<5>[ 1578.206259] (0)[wlan] [13] TRANSITION: [0] -> [1]
<5>[ 1578.206280] (0)[wlan] [13] TRANSITION: [1] -> [6]
<5>[ 1578.206296] (0)[wlan] ChReq net=0 token=1 b=1 c=1 s=0
<6>[ 1578.207494] (0)[wlan] NAF=0,0,0
<5>[ 1578.208306] (0)[wlan] ChGrant net=0 token=1 ch=1 sco=0
<5>[ 1578.208362] (0)[wlan] [13] TRANSITION: [6] -> [7]
<5>[ 1578.208393] (0)[wlan] STA 40mAllowed=0
<6>[ 1578.208484] (0)[wlan] Wait Cmd TxSeqNum:1
<6>[ 1578.209814] (0)[wlan] EVENT_ID_TX_DONE PacketSeq:1 ucStatus: 0 SN: 26
<6>[ 1578.211017] (0)[wlan] Wait Cmd TxSeqNum:2
<6>[ 1578.212744] (0)[wlan] EVENT_ID_TX_DONE PacketSeq:2 ucStatus: 0 SN: 27
<6>[ 1578.213961] (0)[wlan] QM: (fgIsWmmSupported=1, fgSupportQoS=1)
<6>[ 1578.213979] (0)[wlan] QM: (fgIsWmmSupported=1, fgIsQoS=1)
<6>[ 1578.214047] (0)[wlan] MQM: Assoc_Rsp Parsing (QoS Enabled=1)
<5>[ 1578.214071] (0)[wlan] N=0 b=1 c=1 s=0 e=0 h=0 I=0x00 l=1 p=1
<5>[ 1578.214094] (0)[wlan]
<4>[ 1578.214105] (0)f4:ec:38:9d:b2:d0 [17] TRANSITION: [0] -> [3]
<4>[ 1578.214110] (0)
<5>[ 1578.214143] (0)[wlan] [wifi] wlan0 netif_carrier_on [ssid:WNetwork f4:ec:38:9d:b2:d0]
<5>[ 1578.214162] (0)[wlan] EVENT-ROAMING START: Current Time = 1243410
<5>[ 1578.214179] (0)[wlan] [27] TRANSITION: [0] -> [1]
<5>[ 1578.214192] (0)[wlan] [13] TRANSITION: [7] -> [10]
<6>[ 1578.214456] (0)ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<5>[ 1578.218933] (0)[wlan] QM: +STA[0]
<5>[ 1578.232952] (0)[wlan] N=0 b=1 c=1 s=0 e=0 h=0 I=0x00 l=1 p=1
<7>[ 1578.313392] (1)[4236:com.specdevice] exit
<5>[ 1578.335056] (0)[wlan] N=0 b=1 c=1 s=0 e=0 h=0 I=0x00 l=1 p=1
<5>[ 1578.336932] (0)[wlan] R1X len=113
<5>[ 1578.351046] (0)[wlan] T1X len=135
<5>[ 1578.355458] (0)[wlan] R1X len=193
<5>[ 1578.364983] (0)[wlan] T1X len=113
<7>[ 1578.378634] (1)[349:WifiStateMachin] fork [4258:WifiStateMachin]
<7>[ 1578.378681] (1)[4258:WifiStateMachin] set proc[4258] name: ->[DhcpStateMachin]
<6>[ 1578.400265] (1)[wlan] eNetTypeIndex:0, ePwrMode:0, fgEnCmdEvent:1
<5>[ 1578.400296] (1)[wlan] Set Wi-Fi PS mode to CAM (0)
<5>[ 1578.402051] (1)init: starting `dhcpcd_wlan0`
<7>[ 1578.402553] (1)[1:init] fork [4259:init]
<7>[ 1578.403164] (1)[4259:init] set proc[4259] name: ->[logwrapper]
<7>[ 1578.405127] (1)[4259:logwrapper] fork [4260:logwrapper]
<7>[ 1578.406441] (1)[4260:logwrapper] set proc[4260] name: ->[dhcpcd]
<7>[ 1578.418174] (1)[4260:dhcpcd] fork [4261:dhcpcd]
<7>[ 1578.418210] (1)[4261:dhcpcd] set proc[4261] name: ->[dhcpcd-run-hook]
<7>[ 1578.422163] (1)[4261:dhcpcd-run-hook] fork [4262:dhcpcd-run-hook]
<7>[ 1578.423469] (1)[4262:dhcpcd-run-hook] set proc[4262] name: ->[ls]
<7>[ 1578.426567] (1)[4262:ls] exit
<7>[ 1578.426723] (1)[4262:ls] sig 17 to [4261:dhcpcd-run-hook]
<7>[ 1578.427646] (1)[4261:dhcpcd-run-hook] fork [4263:dhcpcd-run-hook]
<7>[ 1578.428801] (0)[4263:dhcpcd-run-hook] set proc[4263] name: ->[ls]
<7>[ 1578.433150] (0)[4263:ls] exit
<7>[ 1578.433325] (0)[4263:ls] sig 17 to [4261:dhcpcd-run-hook]
<7>[ 1578.436020] (1)[4261:dhcpcd-run-hook] fork [4264:dhcpcd-run-hook]
<7>[ 1578.436793] (1)[4264:dhcpcd-run-hook] set proc[4264] name: ->[ls]
<7>[ 1578.439406] (1)[4264:ls] exit
<7>[ 1578.439594] (1)[4264:ls] sig 17 to [4261:dhcpcd-run-hook]
<7>[ 1578.440765] (1)[4261:dhcpcd-run-hook] fork [4265:dhcpcd-run-hook]
<7>[ 1578.441979] (1)[4265:dhcpcd-run-hook] set proc[4265] name: ->[setprop]
<7>[ 1578.444818] (1)[4265:setprop] exit
<7>[ 1578.444966] (1)[4265:setprop] sig 17 to [4261:dhcpcd-run-hook]
<7>[ 1578.445810] (1)[4261:dhcpcd-run-hook] fork [4266:dhcpcd-run-hook]
<7>[ 1578.446628] (1)[4266:dhcpcd-run-hook] set proc[4266] name: ->[ls]
<7>[ 1578.449140] (1)[4266:ls] exit
<7>[ 1578.449297] (1)[4266:ls] sig 17 to [4261:dhcpcd-run-hook]
<7>[ 1578.449561] (1)[4261:dhcpcd-run-hook] exit
<7>[ 1578.449690] (1)[4261:dhcpcd-run-hook] sig 17 to [4260:dhcpcd]
<7>[ 1578.487828] (0)[4260:dhcpcd] fork [4267:dhcpcd]
<7>[ 1578.487863] (0)[4267:dhcpcd] set proc[4267] name: ->[dhcpcd-run-hook]
<7>[ 1578.490478] (0)[4267:dhcpcd-run-hook] fork [4268:dhcpcd-run-hook]
<7>[ 1578.491301] (0)[4268:dhcpcd-run-hook] set proc[4268] name: ->[ls]
<7>[ 1578.493786] (0)[4268:ls] exit
<7>[ 1578.493941] (0)[4268:ls] sig 17 to [4267:dhcpcd-run-hook]
<7>[ 1578.494753] (0)[4267:dhcpcd-run-hook] fork [4269:dhcpcd-run-hook]
<7>[ 1578.495600] (0)[4269:dhcpcd-run-hook] set proc[4269] name: ->[ls]
<7>[ 1578.500394] (0)[4269:ls] exit
<7>[ 1578.500573] (0)[4269:ls] sig 17 to [4267:dhcpcd-run-hook]
<7>[ 1578.501864] (0)[4267:dhcpcd-run-hook] fork [4270:dhcpcd-run-hook]
<7>[ 1578.502752] (0)[4270:dhcpcd-run-hook] set proc[4270] name: ->[ls]
<7>[ 1578.505707] (0)[4270:ls] exit
<7>[ 1578.505869] (0)[4270:ls] sig 17 to [4267:dhcpcd-run-hook]
<7>[ 1578.506539] (0)[4267:dhcpcd-run-hook] fork [4271:dhcpcd-run-hook]
<7>[ 1578.507360] (0)[4271:dhcpcd-run-hook] set proc[4271] name: ->[setprop]
<7>[ 1578.514276] (0)[4271:setprop] exit
<7>[ 1578.514479] (0)[4271:setprop] sig 17 to [4267:dhcpcd-run-hook]
<7>[ 1578.515354] (0)[4267:dhcpcd-run-hook] fork [4272:dhcpcd-run-hook]
<7>[ 1578.516971] (0)[4272:dhcpcd-run-hook] set proc[4272] name: ->[ls]
<7>[ 1578.519468] (0)[4272:ls] exit
<7>[ 1578.519619] (0)[4272:ls] sig 17 to [4267:dhcpcd-run-hook]
<7>[ 1578.519882] (0)[4267:dhcpcd-run-hook] exit
<7>[ 1578.520010] (0)[4267:dhcpcd-run-hook] sig 17 to [4260:dhcpcd]
<7>[ 1578.527531] (0)[4244:AsyncTask #2] fork [4273:AsyncTask #2]
<7>[ 1578.542922] (0)[4273:AsyncTask #2] set proc[4273] name: ->[dmesg]
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IMM76D
ro.build.display.id=ALPS.ICS2.MP.V1.3
ro.build.version.incremental=eng.sw01.1365564678
ro.custom.build.version=V3G.13.04.10
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.1.1
ro.build.date=Wed Apr 10 11:54:06 CST 2013
ro.build.date.utc=1365566046
ro.build.type=user
ro.build.user=sw01
ro.build.host=work01-pc
ro.build.tags=test-keys
ro.product.model=e958
ro.product.brand=alps
ro.product.name=e958
ro.product.device=e958
ro.product.board=e958
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=alps
ro.product.locale.language=zh
ro.product.locale.region=CN
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=e958
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=e958-user 4.1.1 IMM76D eng.sw01.1365564678 test-keys
ro.build.fingerprint=alps/e958/e958:4.1.1/IMM76D/1365564678:user/test-keys
ro.build.flavor=
ro.build.characteristics=default
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=ALPS.ICS2.MP.V1.3
ro.mediatek.platform=MT6577
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.ICS2.MP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=128m
# Encrypt phone function
ro.crypto.tmpfs_options=mode=0771,uid=1000,gid=1000
ro.crypto.fs_type=ext4
ro.crypto.fs_real_blkdev=/emmc@usrdata
ro.crypto.fs_mnt_point=/data
ro.crypto.fs_options=noauto_da_alloc
ro.crypto.fs_flags=0x00000406
# USB MTP WHQL
ro.sys.usb.mtp.whql.enable=0
# Power off opt in IPO
sys.ipo.pwrdncap=2
ro.sys.usb.storage.type=mtp,mass_storage
#
# ADDITIONAL_BUILD_PROPERTIES
#
fmradio.driver.chip=3
ro.sf.hwrotation=0
ril.current.share_modem=1
launcherplus.allappsgrid=2d
launcher2.allappsgrid=3d_20
curlockscreen=2
ro.mediatek.gemini_support=false
persist.radio.fd.counter=20
persist.radio.fd.off.counter=20
drm.service.enabled=true
fmradio.driver.enable=1
doublefish.vendor.pcb.name=PCB_E958
doublefish.mtk.modem.support=modem_3g
doublefish.cust.modem=moztek77_ics2_hspa
doublefish.gemini=no
doublefish.lcd.width=480
doublefish.lcd.height=800
doublefish.touchpanel=ft6206
doublefish.accelerometer=bma250_250e_auto
kxtf9_auto
doublefish.alsps=pstouch
doublefish.mtk.branch=MAIN2.1
doublefish.custom.verno=V3G.13.04.10
mediatek.wlan.chip=MT6628
mediatek.wlan.module.postfix=_mt6628
dalvik.vm.mtk-stack-trace-file=/data/anr/mtk_traces.txt
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.config.ringtone=Backroad.ogg
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
wlan_mt6628 285667 0 - Live 0xbf1fb000 (P)
cfg80211 122000 0 - Live 0xbf1d2000
mtk_fm_priv 2399 0 - Live 0xbf1ce000 (P)
mtk_fm_drv 98585 1 mtk_fm_priv, Live 0xbf1ae000
mtk_stp_bt 39986 0 - Live 0xbf1a1000
mtk_stp_gps 37294 0 - Live 0xbf194000
mtk_stp_uart 21589 1 - Live 0xbf18b000 (P)
mtk_stp_wmt 372827 8 wlan_mt6628,mtk_fm_priv,mtk_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf121000 (P)
mtk_hif_sdio 18482 2 wlan_mt6628,mtk_stp_wmt, Live 0xbf118000
devinfo 840 0 - Live 0xbf114000 (P)
devapc 4553 0 - Live 0xbf10f000 (P)
sec 90381 0 - Live 0xbf0f2000 (P)
vcodec_kernel_driver 42994 0 - Live 0xbf0e2000 (P)
m4u 113415 26 - Live 0xbf0bd000 (P)
ccmni 17142 0 - Live 0xbf0b4000 (P)
ccci 117136 15 ccmni, Live 0xbf08c000 (P)
ccci_plat 127198 2 ccmni,ccci, Live 0xbf063000 (P)
mtk_drvb_77 6081 0 - Live 0xbf05e000 (P)
mtklfb 23570 0 - Live 0xbf054000
pvrsrvkm 233143 99 mtklfb, Live 0xbf00d000
mtk_hwe 1386 0 - Live 0xbf009000 (P)
aed 16376 3 - Live 0xbf000000 (P)
RAM: 512 MB (486 MB available)
System RAM: 486.000MB
mtkfb.0: 4.000MB
Flash: 4 GB (3.666 GB actual); 8 GB (7.501 GB actual)
mmcblk0: 3.666 GB
mmcblk1: 7.501 GB
Тачскрин для alps e958
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin
$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft
$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm
$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
Новый аккумулятор для alps e958
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin
$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm
$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft
$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
Чехлы для alps e958
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin
$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm
$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft
$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
Найти похожие устройства | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |