1. Install SpecDevice
2. Run and decode your specs
3. Get your link (read more...)
| General Specifications | |
|---|---|
| Manufacturer | alps |
| Model | C9300 |
| Firmware | 2.3.6; eng.guolinli.1353636331; SDK10 |
| CPU | 1 core; ARMv7 Processor rev 10 (v7l) |
| Display | 854 x 480; DPI: 240; Evaluated Size: 4,1" |
| Touch screen | Multitouch 3 points |
| GPU | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.7@276259 |
| RAM | 512 MB (498 MB available) |
| Flash | 8 GB (7.285 GB actual); 0.5 GB (0.472 GB actual) (see memory map tab) |
| Communications | |
| Phone | GSM, Dual SIM; Net: GPRS |
| WiFi | lca_core; IEEE 802.11 b/g/n; MediaTek MT5931 |
| USB Host | Yes |
| Bluetooth | no |
| GPS | Yes |
| Advanced Features | |
| Front camera | Photo: 3.1 MP; Max: 2048x1536; Focus: infinity; Flash modes: on off torch |
| Back camera | Photo: 0.3 MP; Max size: 640x480; Focus: infinity; No flash |
| Sensors | BMA250 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; |
| TMD2771 Proximity Sensor (TAOS); range: 0...1; resolution: 1 (100%); power: 0,13mA; | |
| TMD2771 Light Sensor (TAOS); range: 0...10240; resolution: 1 (0,01%); power: 0,13mA; | |
| Gravity Sensor (Google Inc.); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; | |
| Linear Acceleration Sensor (Google Inc.); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; | |
| Rotation Vector Sensor (Google Inc.); range: 0...1; resolution: 0 (0%); power: 0,13mA; | |
| Vibrator | Yes |
| Supported languages | 41; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Portuguese; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
| Battery | Technology: Li-ion; Voltage: 3708 |
| SD Version: | 1.1 5 |
KERNEL: Linux version 2.6.35.7 (guolinli@mtk-ui2) (gcc version 4.4.3 (GCC) ) #1 PREEMPT Fri Nov 23 10:05:18 CST 2012
CODENAME: REL
Mainboard: ginwave15_6626_gb2
BRAND: alps
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: ginwave15_6626_gb2
DISPLAY: CRWX-T463_B01-S01_V02_20121123
FINGERPRINT: alps/ginwave15_6626_gb2/ginwave15_6626_gb2:2.3.6/GRK39F/1353636331:user/test-keys
HARDWARE: mt6575
ID: GRK39F
TAGS: test-keys
Processor : ARMv7 Processor rev 10 (v7l)
BogoMIPS : 1998.84
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc09
CPU revision : 10
Hardware : MT6575
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_stream2
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<7>[ 1369.141382] [4321:dmesg] exit
<7>[ 1369.141568] [4321:dmesg] sig 17 to [4299:AsyncTask #1]
<6>[ 1369.147547] [RTlog delete] fib_netdev_event() wlan0 NETDEV_DOWN!
<6>[ 1369.149003] [WLAN] rfkill_set_block(blocked 1)
<6>[ 1369.149013] [WLAN] Power off
<3>[ 1369.149024] msdc3 -> USR Suspend <- msdc_pm() : L<1097> PID
<6>[ 1369.149068] [SDIO Client]hif_sdio_remove
<5>[ 1369.149081] [wlan] Remove wlan!
<5>[ 1369.160092] [wlan]
<1>[ 1369.160102] tx_thread should stop now...
<5>[ 1369.160113] [wlan] mtk_sdiod stops
<7>[ 1369.160128] [291:tx_thread] exit
<5>[ 1369.160272] [wlan] mtk_sdiod stopped
<6>[ 1369.172278] [ALS/PS] als_value_lux = 77
<6>[ 1369.174977] [ALS/PS] als_value_lux = 77
<6>[ 1369.176691] [ALS/PS] als_value_lux = 77
<5>[ 1369.179818] [wlan] QM: Enter qmFlushRxQueues()
<5>[ 1369.180298] [wlan] QM: Enter qmFlushTxQueues()
<5>[ 1369.180361] [wlan] Number of Stalled Packets = 0
<7>[ 1369.184157] [222:NativeDaemonCon] fork [4323:NativeDaemonCon]
<7>[ 1369.184538] [4323:NativeDaemonCon] set proc[4323] name: -> [Thread-102]
<7>[ 1369.187941] [4323:Thread-102] exit
<6>[ 1369.372279] [ALS/PS] als_value_lux = 77
<6>[ 1369.374023] [ALS/PS] als_value_lux = 77
<6>[ 1369.375756] [ALS/PS] als_value_lux = 77
<5>[ 1369.439900] [wlan] unregisterdev(0xde4ac000)
<6>[ 1369.439969] [SDIO Client]hif_sdio_remove call client`s hif_clt_remove()done!
<7>[ 1369.440002] [247:ksdioirqd/mmc1] exit
<4>[ 1369.440307] [SDIO Client]hif_sdio_remove:sdio func(0xd851d3a0) is removed successfully!
<6>[ 1369.440398] mmc1: card 0001 removed
<3>[ 1369.459771] msdc3 -> save latch data<1> cmd<1> <- msdc_ops_set_ios() : L<2846> PID
<3>[ 1369.459787] msdc3 -> set mclk to 0 <- msdc_set_mclk() : L<655> PID
<5>[ 1369.459937] [Power/clkmgr] [disable_clock] disable wpll clksrc 0x2 for clock 18
<5>[ 1369.459952] [Power/clkmgr] [disable_wpll_clksrc_op] wpll_clksrc_mask=0x2, wpll_clksrc_state=0x0, WPLL_CON=0x38
<6>[ 1369.459968] [mt5931_power_off] ++
<6>[ 1369.459975] [mt5931_power_off] config EINT_PIN
<6>[ 1369.459982] [mt5931_power_off] pull up sd3 bus (GPIO89~GPIO94)
<6>[ 1369.459993] [mt5931_power_off] config PMU_EN_PIN/RST_PIN - LOW
<6>[ 1369.460001] [mt5931_power_off] --
<7>[ 1369.484605] [196:er.ServerThread] fork [4324:er.ServerThread]
<7>[ 1369.518369] [4324:er.ServerThread] set proc[4324] name: -> [Thread-103]
<7>[ 1369.521374] [4324:Thread-103] exit
<6>[ 1369.524117] [WLAN] rfkill_set_block(blocked 0)
<6>[ 1369.524128] [WLAN] Power on
<6>[ 1369.524135] =====MT5931 PIN DUMP=====
<6>[ 1369.524141] GPIO_WIFI_EINT_PIN=[187]
<6>[ 1369.524147] GPIO_WIFI_PMU_EN_PIN=[127]
<6>[ 1369.524153] GPIO_WIFI_RST_PIN=[185]
<6>[ 1369.524159] GPIO_WIFI_CLK_PIN not defined
<6>[ 1369.524165] CUST_EINT_WIFI_NUM=[13]
<6>[ 1369.524170] ==========================
<6>[ 1369.524177] [mt5931_power_on] ++ (0)
<6>[ 1369.524183] [mt5931_power_on] config EINT_PIN
<6>[ 1369.524192] [mt5931_power_on] pull up sd3 bus (GPIO89~GPIO94)
<6>[ 1369.524202] [mt5931_power_on] config PMU_EN_PIN (PULL-DISABLE)
<6>[ 1369.524210] [mt5931_power_on] config PMU_EN_PIN/RST_PIN (OUT)
<6>[ 1369.524218] [mt5931_power_on] config PMU_EN_PIN/RST_PIN (GPIO mode)
<6>[ 1369.524226] [mt5931_power_on] config PMU_EN_PIN/RST_PIN - LOW
<6>[ 1369.524234] [mt5931_power_on] 10ms delay
<7>[ 1369.529793] [339:WifiWatchdogThr] exit
<6>[ 1369.539707] [mt5931_power_on] config PMU_EN_PIN - HIGH with 3ms delay
<6>[ 1369.559697] [mt5931_power_on] config RST_PIN - HIGH with 12ms delay
<6>[ 1369.572535] [ALS/PS] als_value_lux = 78
<6>[ 1369.574473] [ALS/PS] als_value_lux = 78
<6>[ 1369.576453] [ALS/PS] als_value_lux = 78
<6>[ 1369.589686] [mt5931_power_on] --
<5>[ 1369.589706] [Power/clkmgr] [enable_clock] enable wpll clksrc 0x2 for clock 18
<5>[ 1369.589750] [Power/clkmgr] [enable_wpll_clksrc_op] wpll_clksrc_mask=0x2, wpll_clksrc_state=0x3, WPLL_CON=0x3b
<3>[ 1369.589780] msdc3 -> USR Resume <- msdc_pm() : L<1122> PID
<3>[ 1369.590534] msdc3 -> sdio ops_get_cd<1> <- msdc_ops_get_cd() : L<2893> PID
<7>[ 1369.591001] [5:khelper] fork [4325:khelper]
<7>[ 1369.591254] [4325:khelper] fork [4326:khelper]
<7>[ 1369.599870] [4326:khelper] exit
<7>[ 1369.599901] [4326:khelper] sig 17 to [4325:khelper]
<7>[ 1369.599960] [4325:khelper] exit
<3>[ 1369.629921] msdc3 -> ================ <- msdc_set_mclk() : L<703> PID
<3>[ 1369.629939] msdc3 -> !!! Set<260KHz> Source<197000KHz> -> sclk<259KHz> DDR<0> mode<0> div<190> <- msdc_set_mclk() : L<705> PID
<3>[ 1369.629953] msdc3 -> ================ <- msdc_set_mclk() : L<706> PID
<3>[ 1369.650273] msdc3 -> XXX CMD<52> MSDC_INT_CMDTMO Arg<0x00000c00> <- msdc_irq() : L<3078>
<3>[ 1369.650865] msdc3 -> XXX CMD<52> MSDC_INT_CMDTMO Arg<0x80000c08> <- msdc_irq() : L<3078>
<3>[ 1369.655431] msdc3 -> XXX CMD<8> MSDC_INT_CMDTMO Arg<0x000001aa> <- msdc_irq() : L<3078>
<3>[ 1369.661219] msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1182> PID
<3>[ 1369.695498] msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<2838> PID
<3>[ 1369.695532] msdc3 -> ================ <- msdc_set_mclk() : L<703> PID
<3>[ 1369.695547] msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<705> PID
<3>[ 1369.695562] msdc3 -> ================ <- msdc_set_mclk() : L<706> PID
<6>[ 1369.696654] mmc1: new high speed SDIO card at address 0001
<6>[ 1369.697475] [SDIO Client]vendor(0x37a) device(0x5931) num(0x1)
<6>[ 1369.697489] [SDIO Client]card->info[0]: MediaTek MT5931 Wireless Chip
<6>[ 1369.697498] [SDIO Client]card->info[1]:
<6>[ 1369.697504] [SDIO Client]card->info[2]:
<6>[ 1369.697608] [SDIO Client]blksize: cur(512) max(2048)
<6>[ 1369.697617] [SDIO Client]host max: blk_size(2048) blk_count(520192)
<7>[ 1369.697720] [2:kthreadd] fork [4327:kthreadd]
<6>[ 1369.697751] sdio_claim_irq ret=0
<6>[ 1369.697891] [SDIO Client]schedule another task to call client`s hif_clt_probe()done!
<5>[ 1369.697939] [wlan] net_device prDev(0xde4ac000) allocated
<5>[ 1369.699110] [wlan] Open FW image: WIFI_RAM_CODE done
<5>[ 1369.708553] [wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[ 1369.708685] [wlan] Virtual Address = e05e9000 for COMMON MGMT MEMORY POOL.
<5>[ 1369.708698] [wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[ 1369.708749] [wlan] Virtual Address = e05ec000 for SW_RFB_T.
<5>[ 1369.708759] [wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[ 1369.708812] [wlan] Virtual Address = e2421000 for MSDU_INFO_T.
<6>[ 1369.709221] [wlan] Download Address: 0xFF900000
<6>[ 1369.709234] [wlan] Firmware Length: 0x00021F80
<6>[ 1369.829685] [wlan] INIT-RDY detected
<6>[ 1369.849766] [wlan] PLL-RDY detected
<6>[ 1369.849816] [wlan] Destination: 0xFF900000 / Length: 0x00000800
<6>[ 1369.849852] [wlan] FWDL_RDY detected
<6>[ 1369.850003] [wlan] Destination: 0xFF900800 / Length: 0x00000800
<6>[ 1369.850040] [wlan] FWDL_RDY detected
<6>[ 1369.850186] [wlan] Destination: 0xFF901000 / Length: 0x00000800
<6>[ 1369.850220] [wlan] FWDL_RDY detected
<6>[ 1369.850368] [wlan] Destination: 0xFF901800 / Length: 0x00000800
<6>[ 1369.850402] [wlan] FWDL_RDY detected
<6>[ 1369.850549] [wlan] Destination: 0xFF902000 / Length: 0x00000800
<6>[ 1369.850582] [wlan] FWDL_RDY detected
<6>[ 1369.850730] [wlan] Destination: 0xFF902800 / Length: 0x00000800
<6>[ 1369.850763] [wlan] FWDL_RDY detected
<6>[ 1369.850912] [wlan] Destination: 0xFF903000 / Length: 0x00000800
<6>[ 1369.850944] [wlan] FWDL_RDY detected
<6>[ 1369.851092] [wlan] Destination: 0xFF903800 / Length: 0x00000800
<6>[ 1369.851125] [wlan] FWDL_RDY detected
<6>[ 1369.851273] [wlan] Destination: 0xFF904000 / Length: 0x00000800
<6>[ 1369.851306] [wlan] FWDL_RDY detected
<6>[ 1369.851454] [wlan] Destination: 0xFF904800 / Length: 0x00000800
<6>[ 1369.851487] [wlan] FWDL_RDY detected
<6>[ 1369.851636] [wlan] Destination: 0xFF905000 / Length: 0x00000800
<6>[ 1369.851669] [wlan] FWDL_RDY detected
<6>[ 1369.851818] [wlan] Destination: 0xFF905800 / Length: 0x00000800
<6>[ 1369.851851] [wlan] FWDL_RDY detected
<6>[ 1369.852000] [wlan] Destination: 0xFF906000 / Length: 0x00000800
<6>[ 1369.852033] [wlan] FWDL_RDY detected
<6>[ 1369.852182] [wlan] Destination: 0xFF906800 / Length: 0x00000800
<6>[ 1369.852215] [wlan] FWDL_RDY detected
<6>[ 1369.852363] [wlan] Destination: 0xFF907000 / Length: 0x00000800
<6>[ 1369.852396] [wlan] FWDL_RDY detected
<6>[ 1369.852545] [wlan] Destination: 0xFF907800 / Length: 0x00000800
<6>[ 1369.852578] [wlan] FWDL_RDY detected
<6>[ 1369.852728] [wlan] Destination: 0xFF908000 / Length: 0x00000800
<6>[ 1369.852761] [wlan] FWDL_RDY detected
<6>[ 1369.852910] [wlan] Destination: 0xFF908800 / Length: 0x00000800
<6>[ 1369.852942] [wlan] FWDL_RDY detected
<6>[ 1369.853092] [wlan] Destination: 0xFF909000 / Length: 0x00000800
<6>[ 1369.853125] [wlan] FWDL_RDY detected
<6>[ 1369.853274] [wlan] Destination: 0xFF909800 / Length: 0x00000800
<6>[ 1369.853307] [wlan] FWDL_RDY detected
<6>[ 1369.853457] [wlan] Destination: 0xFF90A000 / Length: 0x00000800
<6>[ 1369.853489] [wlan] FWDL_RDY detected
<6>[ 1369.853686] [wlan] Destination: 0xFF90A800 / Length: 0x00000800
<6>[ 1369.853728] [wlan] FWDL_RDY detected
<6>[ 1369.853879] [wlan] Destination: 0xFF90B000 / Length: 0x00000800
<6>[ 1369.853914] [wlan] FWDL_RDY detected
<6>[ 1369.854063] [wlan] Destination: 0xFF90B800 / Length: 0x00000800
<6>[ 1369.854096] [wlan] FWDL_RDY detected
<6>[ 1369.854245] [wlan] Destination: 0xFF90C000 / Length: 0x00000800
<6>[ 1369.854278] [wlan] FWDL_RDY detected
<6>[ 1369.854427] [wlan] Destination: 0xFF90C800 / Length: 0x00000800
<6>[ 1369.854460] [wlan] FWDL_RDY detected
<6>[ 1369.854609] [wlan] Destination: 0xFF90D000 / Length: 0x00000800
<6>[ 1369.854641] [wlan] FWDL_RDY detected
<6>[ 1369.854790] [wlan] Destination: 0xFF90D800 / Length: 0x00000800
<6>[ 1369.854824] [wlan] FWDL_RDY detected
<6>[ 1369.854985] [wlan] Destination: 0xFF90E000 / Length: 0x00000800
<6>[ 1369.855043] [wlan] FWDL_RDY detected
<6>[ 1369.855200] [wlan] Destination: 0xFF90E800 / Length: 0x00000800
<6>[ 1369.855234] [wlan] FWDL_RDY detected
<6>[ 1369.855386] [wlan] Destination: 0xFF90F000 / Length: 0x00000800
<6>[ 1369.855420] [wlan] FWDL_RDY detected
<6>[ 1369.855570] [wlan] Destination: 0xFF90F800 / Length: 0x00000800
<6>[ 1369.855603] [wlan] FWDL_RDY detected
<6>[ 1369.855754] [wlan] Destination: 0xFF910000 / Length: 0x00000800
<6>[ 1369.855786] [wlan] FWDL_RDY detected
<6>[ 1369.855938] [wlan] Destination: 0xFF910800 / Length: 0x00000800
<6>[ 1369.855971] [wlan] FWDL_RDY detected
<6>[ 1369.856122] [wlan] Destination: 0xFF911000 / Length: 0x00000800
<6>[ 1369.856155] [wlan] FWDL_RDY detected
<6>[ 1369.856306] [wlan] Destination: 0xFF911800 / Length: 0x00000800
<6>[ 1369.856339] [wlan] FWDL_RDY detected
<6>[ 1369.856490] [wlan] Destination: 0xFF912000 / Length: 0x00000800
<6>[ 1369.856524] [wlan] FWDL_RDY detected
<6>[ 1369.856674] [wlan] Destination: 0xFF912800 / Length: 0x00000800
<6>[ 1369.856707] [wlan] FWDL_RDY detected
<6>[ 1369.856858] [wlan] Destination: 0xFF913000 / Length: 0x00000800
<6>[ 1369.856891] [wlan] FWDL_RDY detected
<6>[ 1369.857042] [wlan] Destination: 0xFF913800 / Length: 0x00000800
<6>[ 1369.857075] [wlan] FWDL_RDY detected
<6>[ 1369.857226] [wlan] Destination: 0xFF914000 / Length: 0x00000800
<6>[ 1369.857259] [wlan] FWDL_RDY detected
<6>[ 1369.857410] [wlan] Destination: 0xFF914800 / Length: 0x00000800
<6>[ 1369.857443] [wlan] FWDL_RDY detected
<6>[ 1369.857594] [wlan] Destination: 0xFF915000 / Length: 0x00000800
<6>[ 1369.857627] [wlan] FWDL_RDY detected
<6>[ 1369.857778] [wlan] Destination: 0xFF915800 / Length: 0x00000800
<6>[ 1369.857810] [wlan] FWDL_RDY detected
<6>[ 1369.857961] [wlan] Destination: 0xFF916000 / Length: 0x00000800
<6>[ 1369.857994] [wlan] FWDL_RDY detected
<6>[ 1369.858146] [wlan] Destination: 0xFF916800 / Length: 0x00000800
<6>[ 1369.858178] [wlan] FWDL_RDY detected
<6>[ 1369.858329] [wlan] Destination: 0xFF917000 / Length: 0x00000800
<6>[ 1369.858361] [wlan] FWDL_RDY detected
<6>[ 1369.858513] [wlan] Destination: 0xFF917800 / Length: 0x00000800
<6>[ 1369.858546] [wlan] FWDL_RDY detected
<6>[ 1369.858697] [wlan] Destination: 0xFF918000 / Length: 0x00000800
<6>[ 1369.858730] [wlan] FWDL_RDY detected
<6>[ 1369.858881] [wlan] Destination: 0xFF918800 / Length: 0x00000800
<6>[ 1369.858914] [wlan] FWDL_RDY detected
<6>[ 1369.859065] [wlan] Destination: 0xFF919000 / Length: 0x00000800
<6>[ 1369.859098] [wlan] FWDL_RDY detected
<6>[ 1369.859249] [wlan] Destination: 0xFF919800 / Length: 0x00000800
<6>[ 1369.859281] [wlan] FWDL_RDY detected
<6>[ 1369.859432] [wlan] Destination: 0xFF91A000 / Length: 0x00000800
<6>[ 1369.859464] [wlan] FWDL_RDY detected
<6>[ 1369.859635] [wlan] Destination: 0xFF91A800 / Length: 0x00000800
<6>[ 1369.859670] [wlan] FWDL_RDY detected
<6>[ 1369.859820] [wlan] Destination: 0xFF91B000 / Length: 0x00000800
<6>[ 1369.859853] [wlan] FWDL_RDY detected
<6>[ 1369.860005] [wlan] Destination: 0xFF91B800 / Length: 0x00000800
<6>[ 1369.860039] [wlan] FWDL_RDY detected
<6>[ 1369.860189] [wlan] Destination: 0xFF91C000 / Length: 0x00000800
<6>[ 1369.860222] [wlan] FWDL_RDY detected
<6>[ 1369.860372] [wlan] Destination: 0xFF91C800 / Length: 0x00000800
<6>[ 1369.860404] [wlan] FWDL_RDY detected
<6>[ 1369.860553] [wlan] Destination: 0xFF91D000 / Length: 0x00000800
<6>[ 1369.860586] [wlan] FWDL_RDY detected
<6>[ 1369.860735] [wlan] Destination: 0xFF91D800 / Length: 0x00000800
<6>[ 1369.860767] [wlan] FWDL_RDY detected
<6>[ 1369.860915] [wlan] Destination: 0xFF91E000 / Length: 0x00000800
<6>[ 1369.860947] [wlan] FWDL_RDY detected
<6>[ 1369.861095] [wlan] Destination: 0xFF91E800 / Length: 0x00000800
<6>[ 1369.861128] [wlan] FWDL_RDY detected
<6>[ 1369.861276] [wlan] Destination: 0xFF91F000 / Length: 0x00000800
<6>[ 1369.861309] [wlan] FWDL_RDY detected
<6>[ 1369.861457] [wlan] Destination: 0xFF91F800 / Length: 0x00000800
<6>[ 1369.861489] [wlan] FWDL_RDY detected
<6>[ 1369.861638] [wlan] Destination: 0xFF920000 / Length: 0x00000800
<6>[ 1369.861670] [wlan] FWDL_RDY detected
<6>[ 1369.861819] [wlan] Destination: 0xFF920800 / Length: 0x00000800
<6>[ 1369.861850] [wlan] FWDL_RDY detected
<6>[ 1369.861999] [wlan] Destination: 0xFF921000 / Length: 0x00000800
<6>[ 1369.862031] [wlan] FWDL_RDY detected
<6>[ 1369.862179] [wlan] Destination: 0xFF921800 / Length: 0x00000780
<6>[ 1369.862211] [wlan] FWDL_RDY detected
<6>[ 1369.879657] [wlan] DL_OK detected
<6>[ 1369.879701] [wlan] wlanAdapterStart(): Waiting for Ready bit..
<7>[ 1369.904593] [5:khelper] fork [4328:khelper]
<7>[ 1369.904910] [4328:khelper] fork [4329:khelper]
<7>[ 1369.904958] [4329:khelper] exit
<7>[ 1369.904979] [4329:khelper] sig 17 to [4328:khelper]
<7>[ 1369.905014] [4328:khelper] exit
<6>[ 1369.939676] [wlan] Ready bit asserted
<6>[ 1369.939688] [wlan] wlanAdapterStart(): Acquiring LP-OWN
<6>[ 1369.959750] [wlan] Chip ID: 0x5931
<6>[ 1369.959763] [wlan] Revision ID: 0x2
<5>[ 1369.964726] [wlan] [wifi] wlan%d netif_carrier_off
<6>[ 1369.964740] [wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[ 1369.964806] [wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[ 1369.964866] [wlan] Domain: map=0, idx=1, code=0x0000
<7>[ 1369.965158] [2:kthreadd] fork [4330:kthreadd]
<5>[ 1369.965196] [wlan] tx_thread starts running...
<6>[ 1369.974042] [ALS/PS] als_value_lux = 75
<6>[ 1369.975754] [ALS/PS] als_value_lux = 75
<6>[ 1369.977531] [ALS/PS] als_value_lux = 75
<6>[ 1370.172274] [ALS/PS] als_value_lux = 77
<6>[ 1370.173987] [ALS/PS] als_value_lux = 77
<6>[ 1370.175696] [ALS/PS] als_value_lux = 77
<6>[ 1370.205311] [RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[ 1370.205332] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[ 1370.220053] [1:init] fork [4331:init]
<7>[ 1370.220996] [226:WifiService] fork [4332:WifiService]
<7>[ 1370.222553] [4331:init] set proc[4331] name: -> [logwrapper]
<7>[ 1370.222713] [4332:WifiService] set proc[4332] name: -> [WifiMonitor]
<6>[ 1370.224678] [MT6620]: BCM BWCS CMD: BWCS CMD = 00010000
<6>[ 1370.224691] [MT6620]: BCM BWCS CMD: aucBTPParams[0] = 00, aucBTPParams[1] = 01, aucBTPParams[2] = 00, aucBTPParams[3] = 00.
<7>[ 1370.232593] [4331:logwrapper] fork [4333:logwrapper]
<7>[ 1370.242092] [196:er.ServerThread] fork [4334:er.ServerThread]
<7>[ 1370.242576] [4333:logwrapper] set proc[4333] name: -> [wpa_supplicant]
<7>[ 1370.276543] [226:WifiService] fork [4335:WifiService]
<7>[ 1370.278071] [4334:er.ServerThread] set proc[4334] name: -> [Thread-105]
<7>[ 1370.279168] [4334:Thread-105] exit
<7>[ 1370.279392] [4335:WifiService] set proc[4335] name: -> [WifiWatchdogThr]
<6>[ 1370.282397] [MT6620]: BCM BWCS Event: 08000000
<6>[ 1370.282410] [MT6620]: BCM BWCS Event: aucBTPParams[0] = 08, aucBTPParams[1] = 00, aucBTPParams[2] = 00, aucBTPParams[3] = 00
<6>[ 1370.282446] [MT6620]: BCM BWCS Event: 04000011
<6>[ 1370.282456] [MT6620]: BCM BWCS Event: aucBTPParams[0] = 04, aucBTPParams[1] = 00, aucBTPParams[2] = 00, aucBTPParams[3] = 11
<5>[ 1370.348462] [wlan] Disable Encryption
<5>[ 1370.348501] [wlan] N=0 closed
<5>[ 1370.348517] [wlan] EVENT-ROAMING ABORT: Current Time = 1070330
<5>[ 1370.348529] [wlan] [13] TRANSITION: [0] -> [0]
<7>[ 1370.348768] [5:khelper] fork [4336:khelper]
<7>[ 1370.348813] [4336:khelper] fork [4337:khelper]
<7>[ 1370.348856] [4337:khelper] exit
<7>[ 1370.348877] [4337:khelper] sig 17 to [4336:khelper]
<7>[ 1370.348912] [4336:khelper] exit
<6>[ 1370.352649] [wlan] NAF=0,0,0
<6>[ 1370.352663] [wlan] NAF=0,0,0
<4>[ 1370.369043] AP VER=[1]
<4>[ 1370.370907] AP VER=[1]
<4>[ 1370.370991] AP VER=[1]
<4>[ 1370.371099] AP VER=[1]
<6>[ 1370.373580] [ALS/PS] als_value_lux = 77
<6>[ 1370.375293] [ALS/PS] als_value_lux = 77
<6>[ 1370.377002] [ALS/PS] als_value_lux = 77
<5>[ 1370.454340] [wlan] [13] TRANSITION: [0] -> [2]
<6>[ 1370.533144] [MT6620]: BCM BWCS Event: 04000012
<6>[ 1370.533157] [MT6620]: BCM BWCS Event: aucBTPParams[0] = 04, aucBTPParams[1] = 00, aucBTPParams[2] = 00, aucBTPParams[3] = 12
<7>[ 1370.540428] [224:ConnectivityThr] fork [4338:ConnectivityThr]
<7>[ 1370.540979] [4338:ConnectivityThr] set proc[4338] name: -> [DHCP Handler Th]
<6>[ 1370.572326] [ALS/PS] als_value_lux = 77
<5>[ 1370.572351] [Power/Battery] [FGADC] 0,3102,0,-123,3766,37,43,52,1462,1468,52,0,0,1000,0,3717,1000,48,56,2983,104,103
<4>[ 1370.572548] charger no exist
<0>[ 1370.572560] mt_usb_disconnect 287: [MUSB] USB is ready for disconnect
<6>[ 1370.574096] [ALS/PS] als_value_lux = 77
<6>[ 1370.575850] [ALS/PS] als_value_lux = 77
<6>[ 1370.596645] [MT6620]: BCM BWCS Event: 04000013
<6>[ 1370.596658] [MT6620]: BCM BWCS Event: aucBTPParams[0] = 04, aucBTPParams[1] = 00, aucBTPParams[2] = 00, aucBTPParams[3] = 13
<6>[ 1370.660092] [MT6620]: BCM BWCS Event: 04000014
<6>[ 1370.660105] [MT6620]: BCM BWCS Event: aucBTPParams[0] = 04, aucBTPParams[1] = 00, aucBTPParams[2] = 00, aucBTPParams[3] = 14
<7>[ 1370.668351] [4299:AsyncTask #1] fork [4339:AsyncTask #1]
<7>[ 1370.673848] [4339:AsyncTask #1] set proc[4339] name: -> [dmesg]
<6>[ 1370.674207] [MT6620]: BCM BWCS Event: 04000015
<6>[ 1370.674219] [MT6620]: BCM BWCS Event: aucBTPParams[0] = 04, aucBTPParams[1] = 00, aucBTPParams[2] = 00, aucBTPParams[3] = 15
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GRK39F
ro.build.display.id=CRWX-T463_B01-S01_V02_20121123
ro.build.version.incremental=eng.guolinli.1353636331
ro.custom.build.version=1353636331
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.6
ro.build.date=Fri Nov 23 10:11:23 CST 2012
ro.build.date.utc=1353636683
ro.build.type=user
ro.build.user=guolinli
ro.build.host=mtk-ui2
ro.build.tags=test-keys
ro.product.model=C9300
ro.product.brand=alps
ro.product.name=ginwave15_6626_gb2
ro.product.device=ginwave15_6626_gb2
ro.product.board=ginwave15_6626_gb2
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=alps
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=ginwave15_6626_gb2
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=ginwave15_6626_gb2-user 2.3.6 GRK39F eng.guolinli.1353636331 test-keys
ro.build.fingerprint=alps/ginwave15_6626_gb2/ginwave15_6626_gb2:2.3.6/GRK39F/1353636331:user/test-keys
ro.build.flavor=
persist.sys.timezone=Asia/Shanghai
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=CRWX-T463_B01-S01_V02_20121123
ro.mediatek.platform=MT6575
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.GB2.MP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.sf.hwrotation=0
ril.current.share_modem=2
curlockscreen=2
ro.mediatek.gemini_support=true
ro.mediatek.drm_support=true
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.config.ringtone=CaribbeanIce.ogg
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
lca_core 2718 0 - Live 0xbf000000 (P)
pvrsrvkm 163658 60 mtkbc,mtklfb, Live 0xbf006000
mtklfb 14525 0 - Live 0xbf03c000
mtkbc 6303 0 - Live 0xbf046000
mtk_drvb 4403 0 - Live 0xbf04d000 (P)
mt6626_fm_drv 77687 0 - Live 0xbf054000
hif_sdio 8786 1 wlan, Live 0xbf070000
wlan 281879 0 - Live 0xbf079000 (P)
ccci_plat 100680 3 sec,ccmni,ccci, Live 0xbf0d6000 (P)
ccci 136480 15 ccmni, Live 0xbf0f8000 (P)
ccmni 16238 0 - Live 0xbf127000 (P)
mt6575_m4u 84190 4 - Live 0xbf131000 (P)
mt6575_vcodec_kernel_driver 23581 2 - Live 0xbf14e000 (P)
sec 84741 0 - Live 0xbf15b000 (P)
aed 18230 3 - Live 0xbf177000 (P)
RAM: 512 MB (498 MB available)
System RAM: 246.000MB
System RAM: 252.000MB
mtkfb.0: 4.000MB
Flash: 8 GB (7.285 GB actual); 0.5 GB (0.472 GB actual)
mmcblk0: 7.285 GB
mtdblock: 0.018 GB
mtdblock1: 0.472 GB
Touch Screen for alps C9300
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
Replacement Battery for alps C9300
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
Cover Cases for alps C9300
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
| Find Similar devices | |
|---|---|
| Same CPU: | |
| Same Display resolution: | |
| Same ro.build.description: | |
