alps eidolon15_nand_gb2
一般规格
生产厂家alps
型号eidolon15_nand_gb2
Android版4.1.1; eng.soft.1369638564; SDK10
中央处理单元1 core; ARMv7 Processor rev 10 (v7l)
显示800 x 480; DPI: 240; Evaluated Size: 3.9"
触摸屏NOT multitouch 1 point
图形处理器PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.7@810899
内存RAM256 MB (240 MB available)
快闪记忆体8 GB (7.285 GB actual); 0.5 GB (0.472 GB actual) (见存储器映射选项卡)
沟通
电话GSM, Dual SIM
WiFilca_core; IEEE 802.11 b/g/n; MediaTek MT6628; AP Mode; IEEE 802.11 b/g/n; MediaTek 6575; AP Mode
USB主机Yes
蓝牙Bluetooth 3.0
全球定位系统Yes
高级功能
前置摄像头Photo: 1.9 MP; Max: 1600x1200; Focus: infinity; Flash modes: on off torch
背照相机Photo: 1.9 MP; Max size: 1600x1200; Focus: infinity; No flash
传感器ADXL345 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0.004 (0.012%); power: 0.13mA;
CM3623 Proximity Sensor (Capella); range: 0...1; resolution: 1 (100%); power: 0.13mA;
CM3623 Light Sensor (Capella); range: 0...10240; resolution: 1 (0.01%); power: 0.13mA;
Gravity Sensor (Google Inc.); range: 0...32; resolution: 0.004 (0.012%); power: 0.13mA;
Linear Acceleration Sensor (Google Inc.); range: 0...32; resolution: 0.004 (0.012%); power: 0.13mA;
Rotation Vector Sensor (Google Inc.); range: 0...1; resolution: 0 (0%); power: 0.13mA;
震动模式Yes
支持的语言41; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Portuguese; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese
电池Technology: Li-ion; Voltage: 3856
FM radioSupported by chipset
Owner's comment:alps eidolon15_nand_gb2: http://www.specdevice.com
SD Version:1.1 7

KERNEL: Linux version 2.6.35.7 (soft@android) (gcc version 4.4.3 (GCC) ) #1 PREEMPT Mon May 27 15:09:16 CST 2013
CODENAME: REL
Mainboard: eidolon15_nand_gb2
BRAND: alps
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: eidolon15_nand_gb2
DISPLAY: ALPS.GB2.MP.V2.47
FINGERPRINT: alps/eidolon15_nand_gb2/eidolon15_nand_gb2:4.1.1/GRK39F/1369638564:user/test-keys
HARDWARE: mt6575
ID: GRK39F
TAGS: test-keys

Processor : ARMv7 Processor rev 10 (v7l)
BogoMIPS : 1998.84
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc09
CPU revision : 10
Hardware : MT6575
Revision : 65fb8a00
Serial : 0000000000000000

GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_stream2
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture

<7>[ 1929.041673] [2253:dmesg] exit
<7>[ 1929.041845] [2253:dmesg] sig 17 to [2229:AsyncTask #3]
<7>[ 1929.189415] [SYSRAM][EanbleSwitchBank]MFG to SYSRAM, SWITCH_BANK = 0x00000000, u4AllocatedTbl = 0x00000000
<7>[ 1929.190530] [SYSRAM][EanbleSwitchBank]SYSRAM to MFG, SWITCH_BANK = 0x00000007, u4AllocatedTbl = 0x00000000
<5>[ 1929.199949] [wlan] unregisterdev(0xc745e000)
<6>[ 1929.200051] [WMT-DFT][I]hif_sdio_wifi_off:ok!
<7>[ 1929.200093] [291:ksdioirqd/mmc1] exit
<6>[ 1929.200245] [WMT-DFT][I]hif_sdio_wifi_off:sdio_release_irq() for wifi ok
<4>[ 1929.200265] mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[ 1929.200274] mtk_wcn_cmb_sdio_off (3)
<3>[ 1929.200286] msdc3 -> USR Suspend <- msdc_pm() : L<1206> PID<0x58>
<6>[ 1929.200341] [WMT-DFT][I]hif_sdio_remove:start!
<6>[ 1929.200398] [WMT-DFT][I]hif_sdio_remove:sdio func(0xc9c1c4a0) is removed successfully!
<6>[ 1929.200498] mmc1: card 0001 removed
<3>[ 1929.219985] msdc3 -> save latch data<1> cmd<1> <- msdc_ops_set_ios() : L<2981> PID<0x58>
<3>[ 1929.220006] msdc3 -> set mclk to 0 <- msdc_set_mclk() : L<644> PID<0x58>
<3>[ 1929.220180] [WMT-CORE][I]opfunc_func_off:WMT-CORE:Fun(3) [POWER_OFF] and power down chip
<4>[ 1929.220207] [STP-PSM] [I]_stp_psm_is_redundant_active_op: redundant opId found, opId(1), preOpid(1)
<6>[ 1929.220237] [STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[ 1929.220250] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[ 1929.220263] [STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[ 1929.220272] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(1)
<4>[ 1929.220288] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[ 1929.220300] Flush type = 4 Rx Queue
<3>[ 1929.240187] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(close_stp) result(0)
<3>[ 1929.240211] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, hw_pwr_off start
<3>[ 1929.240225] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, BGF_EINT IRQ unregistered and disabled
<3>[ 1929.240241] [WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 1929.240252] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, ALL_EINT IRQ unregistered and disabled
<3>[ 1929.240263] [WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 1929.240276] [WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[ 1929.240289] [WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<3>[ 1929.240301] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[ 1929.240311] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, hw_pwr_off finish
<3>[ 1929.240321] [WMT-CORE][W]opfunc_pwr_off:HW_PWR_OFF ok
<3>[ 1929.240336] [WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC OFF]status(b:0 f:0 g:0 w:0 lpbk:0 coredump:0 wmt:0 sd1:0 sd2:0 stp:0)
<6>[ 1929.240402] [STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[ 1929.240423] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(4) type(3) ok
<7>[ 1929.297682] [212:er.ServerThread] fork [2255:er.ServerThread]
<6>[ 1929.307593] [WLAN] rfkill_set_block(blocked 0)
<6>[ 1929.307603] [WLAN] Power on
<3>[ 1929.307618] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[ 1929.307636] [STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[ 1929.307805] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[ 1929.307819] [WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(not defined)
<3>[ 1929.307828] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO185)
<3>[ 1929.307837] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(GPIO185)
<3>[ 1929.307846] [WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[ 1929.307855] [WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO72)
<3>[ 1929.307864] [WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(4)
<3>[ 1929.307873] [WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO60)
<3>[ 1929.307882] [WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(8)
<3>[ 1929.307892] [WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<3>[ 1929.307901] [WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[ 1929.307910] [WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[ 1929.307919] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[ 1929.307928] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[ 1929.307937] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[ 1929.307946] [WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_CK(GPIO56)
<3>[ 1929.307955] [WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_WS(GPIO57)
<3>[ 1929.307964] [WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_DAT(GPIO58)
<3>[ 1929.307973] [WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(GPIO118)
<3>[ 1929.307982] [WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(GPIO186)
<3>[ 1929.307992] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[ 1929.308003] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<3>[ 1929.308014] [WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 1929.308025] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[ 1929.308039] [WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 1929.308051] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<7>[ 1929.335223] [2255:er.ServerThread] set proc[2255] name: -> [Thread-215]
<7>[ 1929.339241] [379:WifiWatchdogThr] exit
<7>[ 1929.341031] [2255:Thread-215] exit
<7>[ 1929.400158] [5:khelper] fork [2256:khelper]
<7>[ 1929.409977] [2256:khelper] fork [2257:khelper]
<7>[ 1929.416624] [2257:khelper] exit
<7>[ 1929.416661] [2257:khelper] sig 17 to [2256:khelper]
<7>[ 1929.416715] [2256:khelper] exit
<7>[ 1929.416902] [5:khelper] fork [2258:khelper]
<7>[ 1929.442383] [2258:khelper] fork [2259:khelper]
<7>[ 1929.443930] [2259:khelper] exit
<7>[ 1929.443960] [2259:khelper] sig 17 to [2258:khelper]
<7>[ 1929.444008] [2258:khelper] exit
<7>[ 1929.444172] [5:khelper] fork [2260:khelper]
<7>[ 1929.450021] [2260:khelper] fork [2261:khelper]
<7>[ 1929.452496] [2261:khelper] exit
<7>[ 1929.452522] [2261:khelper] sig 17 to [2260:khelper]
<7>[ 1929.452568] [2260:khelper] exit
<7>[ 1929.452755] [5:khelper] fork [2262:khelper]
<7>[ 1929.461187] [2262:khelper] fork [2263:khelper]
<7>[ 1929.469189] [2263:khelper] exit
<7>[ 1929.469215] [2263:khelper] sig 17 to [2262:khelper]
<7>[ 1929.469262] [2262:khelper] exit
<7>[ 1929.469494] [369:wpa_supplicant] exit
<7>[ 1929.469931] [369:wpa_supplicant] sig 17 to [1:init]
<3>[ 1929.470099] init: untracked pid 369 exited
<3>[ 1929.509902] [WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[ 1929.509921] [WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<4>[ 1929.510103] [STP-PSM] [E]_stp_psm_notify_stp(1174):ERROR! Invalid Action!!
<4>[ 1929.510109]
<3>[ 1929.510130] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[ 1929.510142] [WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 1929.510152] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<4>[ 1929.510291] mt6575_get_bus_freq() return 192400
<3>[ 1929.510429] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[ 1929.510440] Flush type = 4 Rx Queue
<3>[ 1929.510573] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[ 1929.510599] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[ 1929.510613] [STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[ 1929.510621] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[ 1929.510631] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<6>[ 1929.510645] [STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[ 1929.510656] [STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[ 1929.510668] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[ 1929.510679] [STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[ 1929.516328] [WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6628)
<3>[ 1929.522377] [WMT-IC][I]mt6628_ver_check:MT6628: read hw_ver (hw version) (0x8b10)
<3>[ 1929.528045] [WMT-IC][I]mt6628_ver_check:MT6628: read fw_ver (rom version) (0x8b10)
<3>[ 1929.528062] [WMT-IC][I]mt6628_find_wmt_ic_info:found ic info(0x8b10) by full match! index:2
<3>[ 1929.528076] [WMT-IC][I]mt6628_ver_check:MT6628: wmt ic info: MT6628.E3 (0x8b10, WMTHWVER:2, patch_ext:_e2)
<3>[ 1929.528091] [WMT-CORE][I]wmt_core_hw_check:chip id(0x6628) ver_check ok
<3>[ 1929.543003] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[ 1929.543017] [WMT-IC][I]mt6628_sw_init:WMT-CORE: change baudrate(4000000) ok
<3>[ 1929.548776] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(srh_patch) result(0)
<3>[ 1929.548792] [WMT-IC][I]mt6628_patch_dwn:valid patch found: (/system/etc/firmware//mt6628_patch_e2_hdr.bin)
<3>[ 1929.550324] [WMT-IC][I]mt6628_patch_dwn:===========================================
<3>[ 1929.550339] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Built Time = 20121225172202a
<3>[ 1929.550350] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[ 1929.550360] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[ 1929.550370] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Ph Ver = 0x0010
<3>[ 1929.550380] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Platform = 1150
<3>[ 1929.550389] [WMT-IC][I]mt6628_patch_dwn:===========================================
<7>[ 1929.609822] [1381:gle.android.gms] fork [2264:gle.android.gms]
<7>[ 1929.609939] [2264:gle.android.gms] set proc[2264] name: -> [iu-sync-manager]
<7>[ 1929.702727] [104:zygote] fork [2265:zygote]
<7>[ 1929.706103] [1381:gle.android.gms] fork [2266:gle.android.gms]
<7>[ 1929.706868] [2265:zygote] fork [2267:zygote]
<7>[ 1929.708426] [2266:gle.android.gms] set proc[2266] name: -> [IntentService[S]
<7>[ 1929.709822] [2267:zygote] set proc[2267] name: -> [HeapWorker]
<3>[ 1929.710542] [WMT-IC][I]mt6628_patch_dwn:wmt_core: patch dwn:0 frag(23, 320) ok
<7>[ 1929.710890] [2265:zygote] fork [2268:zygote]
<3>[ 1929.711279] [WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf08174c)
<3>[ 1929.712284] [WMT-IC][I]mt6628_sw_init:init_coex ok
<7>[ 1929.719921] [2268:zygote] set proc[2268] name: -> [GC]
<7>[ 1929.720672] [2265:zygote] fork [2269:zygote]
<7>[ 1929.720716] [2269:zygote] set proc[2269] name: -> [Signal Catcher]
<7>[ 1929.721033] [2265:zygote] fork [2270:zygote]
<7>[ 1929.721073] [2270:zygote] set proc[2270] name: -> [Compiler]
<7>[ 1929.724994] [2265:zygote] fork [2271:zygote]
<7>[ 1929.727726] [2265:zygote] set proc[2265] name: -> [re-initialized>]
<7>[ 1929.730757] [2271:zygote] set proc[2271] name: -> [BinderThd_AP226]
<6>[ 1929.731080] [STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[ 1929.731096] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[ 1929.731108] [STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[ 1929.731119] [WMT-IC][I]mt6628_sw_init:enable host STP-UART-FULL mode
<7>[ 1929.731588] [2271:BinderThd_AP226] fork [2272:BinderThd_AP226]
<7>[ 1929.736916] [2265:re-initialized>] set proc[2265] name: -> [er.line.android]
<7>[ 1929.738340] [2272:BinderThd_AP226] set proc[2272] name: -> [BinderThd_AP226]
<3>[ 1929.751765] [WMT-IC][I]mt6628_sw_init:co-clock disabled.
<3>[ 1929.752841] [WMT-IC][I]mt6628_sw_init:set fm mode (2) ok
<3>[ 1929.752851] [WMT-IC][I]mt6628_sw_init:disable mt662x firmware coredump
<6>[ 1929.752863] [STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[ 1929.752876] [STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[ 1929.752887] mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[ 1929.752895] board_sdio_ctrl force off before on
<6>[ 1929.752902] mtk_wcn_cmb_sdio_off (3)
<6>[ 1929.752941] mtk_wcn_cmb_sdio_on (3)
<3>[ 1929.752974] msdc3 -> USR Resume <- msdc_pm() : L<1231> PID<0x58>
<3>[ 1929.753505] msdc3 -> sdio ops_get_cd<1> <- msdc_ops_get_cd() : L<3028> PID<0xe>
<3>[ 1929.790104] msdc3 -> ================ <- msdc_set_mclk() : L<692> PID<0xe>
<3>[ 1929.790122] msdc3 -> !!! Set<260KHz> Source<197000KHz> -> sclk<259KHz> DDR<0> mode<0> div<190> <- msdc_set_mclk() : L<694> PID<0xe>
<3>[ 1929.790137] msdc3 -> ================ <- msdc_set_mclk() : L<695> PID<0xe>
<3>[ 1929.810415] msdc3 -> XXX CMD<52> MSDC_INT_CMDTMO Arg<0x00000c00> <- msdc_irq() : L<3213>
<3>[ 1929.811006] msdc3 -> XXX CMD<52> MSDC_INT_CMDTMO Arg<0x80000c08> <- msdc_irq() : L<3213>
<3>[ 1929.815497] msdc3 -> XXX CMD<8> MSDC_INT_CMDTMO Arg<0x000001aa> <- msdc_irq() : L<3213>
<3>[ 1929.816840] msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1291> PID<0xe>
<3>[ 1929.837196] msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<2973> PID<0xe>
<3>[ 1929.837230] msdc3 -> ================ <- msdc_set_mclk() : L<692> PID<0xe>
<3>[ 1929.837245] msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<694> PID<0xe>
<3>[ 1929.837260] msdc3 -> ================ <- msdc_set_mclk() : L<695> PID<0xe>
<6>[ 1929.838042] mmc1: new high speed SDIO card at address 0001
<6>[ 1929.839091] [WMT-DFT][I]hif_sdio_probe:start!
<6>[ 1929.839105] [WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x6628) num(0x1)
<6>[ 1929.839115] [WMT-DFT][I]hif_sdio_probe:card->info[0]: 6628
<6>[ 1929.839123] [WMT-DFT][I]hif_sdio_probe:card->info[1]: Combo
<6>[ 1929.839132] [WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[ 1929.839140] [WMT-DFT][I]hif_sdio_probe:card->info[3]:
<6>[ 1929.839222] [WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(520192)
<7>[ 1929.879674] [SYSRAM][EanbleSwitchBank]MFG to SYSRAM, SWITCH_BANK = 0x00000000, u4AllocatedTbl = 0x00000000
<7>[ 1929.881356] [SYSRAM][EanbleSwitchBank]SYSRAM to MFG, SWITCH_BANK = 0x00000007, u4AllocatedTbl = 0x00000000
<6>[ 1929.909848] [WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[ 1930.010163] [2:kthreadd] fork [2273:kthreadd]
<6>[ 1930.012018] [WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<5>[ 1930.012046] [wlan] net_device prDev(0xc5e77000) allocated
<5>[ 1930.013574] [wlan] Open FW image: WIFI_RAM_CODE done
<6>[ 1930.019917] yaffs: userdata sync do_checkpoint 0,gc_urgen 1
<6>[ 1930.019929] yaffs: userdata yaffs_FlushSuperBlock 0
<7>[ 1930.079494] [SYSRAM][EanbleSwitchBank]MFG to SYSRAM, SWITCH_BANK = 0x00000000, u4AllocatedTbl = 0x00000000
<7>[ 1930.116062] [2266:IntentService[S] exit
<3>[ 1930.216892] In kernel Correct 1 at PageAddr=21118, Sector=0
<6>[ 1930.216902] Less than 2 bit error, ignore
<5>[ 1930.219743] [wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[ 1930.220742] [wlan] Virtual Address = d5780000 for COMMON MGMT MEMORY POOL.
<5>[ 1930.220759] [wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[ 1930.220967] [wlan] Virtual Address = d5783000 for SW_RFB_T.
<5>[ 1930.220979] [wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[ 1930.221113] [wlan] Virtual Address = d5788000 for MSDU_INFO_T.
<6>[ 1930.221126] [wlan] wlanAdapterStart(): Acquiring LP-OWN
<6>[ 1930.239884] [wlan] Chip ID: 0x6628
<6>[ 1930.239895] [wlan] Revision ID: 0x0
<7>[ 1930.274809] [SYSRAM][EanbleSwitchBank]SYSRAM to MFG, SWITCH_BANK = 0x00000007, u4AllocatedTbl = 0x00000000
<5>[ 1930.658768] [Power/Battery] [use_chip_trim_value] 1 -> 0
<5>[ 1930.665960] [Power/Battery] [FGADC] 0,0,0,0,3901,68,72,72,1135,1135,0,0,0,1000,0,3904,1000,28,28,0,104,103
<7>[ 1930.743334] [1608:Smack Packet Wr] exit
<6>[ 1931.023047] [wlan] wlanAdapterStart(): Waiting for Ready bit..
<6>[ 1931.049540] [wlan] Ready bit asserted
<5>[ 1931.080506] [wlan] [wifi] wlan%d netif_carrier_off
<6>[ 1931.080523] [wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[ 1931.080594] [wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[ 1931.080670] [wlan] Domain: map=0, idx=0, code=0x0000
<7>[ 1931.081326] [2:kthreadd] fork [2274:kthreadd]
<5>[ 1931.089988] [wlan] tx_thread starts running...
<6>[ 1931.152781] [WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(6628) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[ 1931.152797] [WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[ 1931.152816] [WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 coredump:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[ 1931.153314] [STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<3>[ 1931.153352] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<4>[ 1931.153943] [STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<6>[ 1931.154469] [RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[ 1931.154491] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[ 1931.156588] [1:init] fork [2275:init]
<7>[ 1931.157741] [245:WifiService] fork [2276:WifiService]
<7>[ 1931.159400] [2276:WifiService] set proc[2276] name: -> [WifiMonitor]
<7>[ 1931.167110] [2275:init] set proc[2275] name: -> [logwrapper]
<7>[ 1931.169640] [2275:logwrapper] fork [2277:logwrapper]
<7>[ 1931.178335] [2277:logwrapper] set proc[2277] name: -> [wpa_supplicant]
<7>[ 1931.188090] [245:WifiService] fork [2278:WifiService]
<7>[ 1931.189126] [212:er.ServerThread] fork [2279:er.ServerThread]
<7>[ 1931.199916] [2279:er.ServerThread] set proc[2279] name: -> [Thread-218]
<7>[ 1931.201082] [2279:Thread-218] exit
<7>[ 1931.201145] [2278:WifiService] set proc[2278] name: -> [WifiWatchdogThr]
<7>[ 1931.282943] [SYSRAM][EanbleSwitchBank]MFG to SYSRAM, SWITCH_BANK = 0x00000000, u4AllocatedTbl = 0x00000000
<7>[ 1931.321717] [SYSRAM][EanbleSwitchBank]SYSRAM to MFG, SWITCH_BANK = 0x00000007, u4AllocatedTbl = 0x00000000
<7>[ 1931.390440] [2229:AsyncTask #3] fork [2280:AsyncTask #3]
<7>[ 1931.396660] [2280:AsyncTask #3] set proc[2280] name: -> [dmesg]

# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GRK39F
ro.build.display.id=ALPS.GB2.MP.V2.47
ro.build.version.incremental=eng.soft.1369638564
ro.custom.build.version=P1000_V024
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=4.1.1
ro.build.date=Mon May 27 15:11:44 CST 2013
ro.build.date.utc=1369638704
ro.build.type=user
ro.build.user=soft
ro.build.host=android
ro.build.tags=test-keys
ro.product.model=eidolon15_nand_gb2
ro.product.brand=alps
ro.product.name=eidolon15_nand_gb2
ro.product.device=eidolon15_nand_gb2
ro.product.board=eidolon15_nand_gb2
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=alps
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=eidolon15_nand_gb2
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=eidolon15_nand_gb2-user 4.1.1 GRK39F eng.soft.1369638564 test-keys
ro.build.fingerprint=alps/eidolon15_nand_gb2/eidolon15_nand_gb2:4.1.1/GRK39F/1369638564:user/test-keys
ro.build.flavor=
persist.sys.timezone=Asia/Shanghai
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=ALPS.GB2.MP.V2.47
ro.mediatek.platform=MT6575
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.GB2.MP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
#
# ADDITIONAL_BUILD_PROPERTIES
#
fmradio.driver.chip=3
ro.sf.hwrotation=90
ril.current.share_modem=2
launcherplus.allappsgrid=2d
launcher2.allappsgrid=3d_20
curlockscreen=2
ro.mediatek.gemini_support=true
ro.mediatek.drm_support=true
mediatek.wlan.chip=MT6628
mediatek.wlan.module.postfix=_mt6628
ro.config.notification_sound=Voila.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.config.ringtone=Ring16.mp3
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt

lca_core 2718 0 - Live 0xbf000000 (P)
pvrsrvkm 165086 37 mtklfb, Live 0xbf006000
mtklfb 14525 0 - Live 0xbf03d000
mtk_drvb 4403 0 - Live 0xbf047000 (P)
mtk_hif_sdio 17706 2 wlan_mt6628,mtk_stp_wmt, Live 0xbf04e000
mtk_stp_wmt 367221 7 wlan_mt6628,mtk_fm_priv,mtk_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf059000 (P)
mtk_stp_uart 21521 1 - Live 0xbf0c3000 (P)
mtk_stp_gps 37166 0 - Live 0xbf0ce000
mtk_stp_bt 39754 0 - Live 0xbf0dd000
mtk_fm_drv 97962 1 mtk_fm_priv, Live 0xbf0ec000
mtk_fm_priv 2427 0 - Live 0xbf10d000 (P)
wlan_mt6628 279970 0 - Live 0xbf113000 (P)
ccci_plat 102100 3 sec,ccmni,ccci, Live 0xbf170000 (P)
ccci 138785 15 ccmni, Live 0xbf192000 (P)
ccmni 16670 0 - Live 0xbf1c1000 (P)
mt6575_m4u 84190 2 - Live 0xbf1cc000 (P)
devinfo 756 0 - Live 0xbf1e9000 (P)
mt6575_vcodec_kernel_driver 23905 0 - Live 0xbf1ef000 (P)
sec 84741 0 - Live 0xbf1fc000 (P)
aed 17997 3 - Live 0xbf218000 (P)

RAM: 256 MB (240 MB available)

System RAM: 240.000MB
mtkfb.0: 6.000MB


Flash: 8 GB (7.285 GB actual); 0.5 GB (0.472 GB actual)

mmcblk0: 7.285 GB
mtdblock: 0.018 GB
mtdblock1: 0.472 GB


触摸屏为 alps eidolon15_nand_gb2

$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original

$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer

$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal

$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,

$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick

$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin

$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button

$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm

$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft

$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm

$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader

$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite

$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB

$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L

$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier

$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch

$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K

$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD

$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories

新电池 alps eidolon15_nand_gb2

$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal

$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick

$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer

$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,

$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original

$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin

$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button

$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm

$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft

$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm

$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader

$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite

$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier

$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L

$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB

$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch

$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K

$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD

$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories

占地面积 alps eidolon15_nand_gb2

$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer

$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal

$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original

$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick

$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,

$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin

$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button

$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm

$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft

$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm

$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader

$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite

$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L

$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB

$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier

$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch

$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD

$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories

$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K

Find Similar devices
Same CPU:
Same Display resolution:
Same ro.build.description:

NEW: 查看完整数据库 >>

的最新:

A19 Pro
alps i14PROMAX
Xiaomi 2201117SI
NUMVIBE X30Pro
Pad_Ultra
INFINIX Infinix X6835B
Xiaomi Redmi 5 Plus
Cat S62 Pro
alps S24 Ultra
alps Reno9 Pro+ 5G
Kobo arc 10HD
L16 Max lingbo l16 max
Lingbo tab s9 ultra
HUAWEI EC6108V9-01
samsung 14 Pro Max
L16 Max
HUAWEI VNS-L31
alps I14 Pro Max
unknown HiDPTAndroid_Hi3751V510
S9 Ultra
Amazon KFRAWI
OnePlus GM1910
android P30
welcome S23 Ultra
AXDIA INTERNATIONAL GMBH PACE10
vivo V1916A
Google Pixel 7
Galaxy S24 Ultra 5G SM-S928B/DS
QUALCOMM trinket for arm64
alps F9210B
Pad 6 Pro
HUAWEI JAT-LX1
alps Galaxy S22 Ultra
HUAWEI KSA-LX9
alps Rino9_pro+
XXB_GMS
realme RMX3363
Google MBOX
alps L015B
alps i13 pro max
alps i14_Pro_Max
SAMSUNG SM-S928BIU
HUAWEI MGA-LX3
alps ZL10
HUAWEI JAT-LX1
Fplus T1100
samsung SM-A215U
alps I15 Pro Max
alps A73s
alps S24 Ultra