1. Установить SpecDevice
2. Запустить, сформируется спецификация
3. Скопировать ссылку (подробнее...)
Основные характеристики | |
---|---|
Производитель | alps |
Модель | Haipai I9220 |
Версия Andriod | 4.0.6; eng.root.1340096866; SDK15 |
Процессор | 1 core; ARMv7 Processor rev 10 (v7l); Max: 1001,0 MHz; Min: 166,8 MHz |
Дисплей | 800 x 480; DPI: 240; Evaluated Size: 3,9" |
Сенсорный экран | Multitouch 5 points |
Графический ускоритель | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.8@789263 |
ОЗУ | 512 MB (486 MB available) |
Память | 4 GB (3.600 GB actual); 16 GB (14.833 GB actual) (см. вкладку "Память") |
Связь | |
Телефон | GSM, Dual SIM; Net: HSPA |
WiFi | wlan; 802.11 b/g/n |
USB Host | No |
Bluetooth | 2.0 |
GPS | Yes |
Установленные компоненты | |
Главная камера | Photo: 8.0 MP; Max: 3264x2448; Focus: auto continuous-picture continuous-video macro infinity manual fullscan; Flash modes: auto on off torch |
Доп. камера | Photo: 0.3 MP; Max size: 640x480; Focus: infinity; Flash modes: off |
Датчики | bma222 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; |
tmd2771 Proximity Sensor (Capella); range: 0...1; resolution: 1 (100%); power: 0,13mA; | |
tmd2771 Light Sensor (Capella); range: 0...10240; resolution: 1 (0,01%); power: 0,13mA; | |
Вибратор | Yes |
Языки | 43; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
Аккумулятор | Technology: Li-ion; Voltage: 3910 |
SD Version: | 1.1 5 |
KERNEL: Linux version 3.0.13 (root@zhangjianan-desktop) (gcc version 4.4.3 (GCC) ) #1 PREEMPT Tue Jul 3 12:58:44 CST 2012
CODENAME: REL
Mainboard: e1809c_v75_lx528_sx
BRAND: Haipai
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: e1809c_v75_lx528_sx
DISPLAY: HaiPai I9220
FINGERPRINT: alps/e1809c_v75_lx528_sx/e1809c_v75_lx528_sx:4.0.6/IML74K/1340096866:user/test-keys
HARDWARE: mt6575
ID: IML74K
TAGS: test-keys
Processor : ARMv7 Processor rev 10 (v7l)
BogoMIPS : 1993.93
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc09
CPU revision : 10
Hardware : MT6575
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<7>[12487.310355] [9103:dmesg] exit
<7>[12487.311647] [9103:dmesg] sig 17 to [9046:AsyncTask #2]
<7>[12487.317504] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 9175693 > 8ms
<7>[12487.317546] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[12487.351154] WQ_WARN: cpu:1, proc:kworker/u:3, dur: 9620384 > 8ms
<7>[12487.351192] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[12487.369040] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 11980692 > 8ms
<7>[12487.369081] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[12487.401524] WQ_WARN: cpu:1, proc:kworker/u:3, dur: 25434539 > 8ms
<7>[12487.401556] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[12487.419489] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 10272693 > 8ms
<7>[12487.419531] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[12487.452183] WQ_WARN: cpu:1, proc:kworker/u:3, dur: 26682769 > 8ms
<7>[12487.452215] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[12487.461849] [8968:Thread-561] exit
<7>[12487.468313] [312:WifiStateMachin] fork err at pid
<7>[12487.468339] [312:WifiStateMachin] fork [9104:WifiStateMachin]
<7>[12487.491093] [9016:Thread-563] exit
<7>[12487.511461] [9104:WifiStateMachin] set proc[9104] name: ->[loadDriverThrea]
<7>[12487.517483] [270:er.ServerThread] fork err at pid
<7>[12487.517512] [270:er.ServerThread] fork [9105:er.ServerThread]
<7>[12487.528925] [9105:er.ServerThread] set proc[9105] name: ->[Thread-737]
<7>[12487.530036] [9105:Thread-737] exit
<6>[12487.544330] [WLAN] rfkill_set_block(blocked 0)
<6>[12487.544341] [WLAN] Power on
<3>[12487.544353] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[12487.545132] [STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[12487.545170] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[12487.546235] [WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(not defined)
<3>[12487.546983] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO124)
<3>[12487.547686] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(not defined)
<3>[12487.548466] [WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[12487.549159] [WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO185)
<3>[12487.549918] [WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(14)
<3>[12487.550665] [WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO184)
<3>[12487.551434] [WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(11)
<3>[12487.552192] [WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<3>[12487.555132] [WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[12487.555886] [WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[12487.557599] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[12487.558322] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[12487.559276] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[12487.560004] [WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_CK(not defined)
<3>[12487.561892] [WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_WS(not defined)
<3>[12487.562718] [WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_DAT(not defined)
<3>[12487.563501] [WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(GPIO206)
<3>[12487.564258] [WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(not defined)
<3>[12487.565585] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[12487.566643] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<3>[12487.567475] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[12487.568261] [WMT-PLAT][W]wmt_plat_gps_lna_ctrl:host gps lna pin not defined!!!
<3>[12487.569463] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<5>[12487.672531] [Power/RTC] RTC_GPIO user 9 enables 32k (0x1200)
<3>[12487.782465] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, rtc clock exported
<3>[12487.882495] [WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[12487.883257] [WMT-PLAT][E]wmt_plat_i2s_ctrl(1065):[MT6620]Error:FM digital mode set, but no I2S GPIOs defined
<3>[12487.884474] [WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<3>[12487.885672] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[12487.886743] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<4>[12487.887802] mt6575_get_bus_freq() return 192400
<3>[12487.888554] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[12487.889295] Flush type = 4 Rx Queue
<3>[12487.890653] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[12487.891454] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[12487.891466] [STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[12487.892105] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[12487.892896] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[12487.893580] [STP-PSM] [I]_stp_psm_set_state: work_state = ACT --> ACT
<6>[12487.894385] [STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[12487.894396] [STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[12487.894406] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<3>[12487.899670] [WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6620)
<3>[12487.905749] [WMT-IC][I]mt6620_ver_check:MT6620: read hw_ver (hw version) (0x8a11)
<3>[12487.913044] [WMT-IC][I]mt6620_ver_check:MT6620: read fw_ver (rom version) (0x8a10)
<3>[12487.914007] [WMT-IC][I]mt6620_find_wmt_ic_info:found ic info(0x8a11) by full match! index:3
<3>[12487.915041] [WMT-IC][I]mt6620_ver_check:MT6620: wmt ic info: MT6620.E4 (0x8a11, WMTHWVER:3, patch_ext:_e3)
<3>[12487.916243] [WMT-CORE][I]wmt_core_hw_check:chip id(0x6620) ver_check ok
<3>[12487.927768] [WMT-CTRL][W]wmt_ctrl_rx:wmt_ctrl_rx be signaled, but no rx data(200)
<3>[12487.934733] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[12487.935563] [WMT-IC][I]mt6620_sw_init:WMT-CORE: change baudrate(4000000) ok
<3>[12487.938218] [WMT-IC][I]mt6620_update_patch_name:full firmware patch name: /system/etc/firmware/mt6620_patch_e3_hdr.bin
<3>[12487.941990] [WMT-IC][I]mt6620_patch_dwn:===========================================
<3>[12487.943023] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Built Time = 20120320180900
<3>[12487.943960] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[12487.944760] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[12487.948744] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Ph Ver = 0x001b
<3>[12487.949589] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Platform = 1212
<3>[12487.950382] [WMT-IC][I]mt6620_patch_dwn:===========================================
<7>[12487.954152] WQ_WARN: cpu:1, proc:kworker/u:3, dur: 17535231 > 8ms
<7>[12487.954183] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[12487.971026] WQ_WARN: cpu:1, proc:kworker/u:3, dur: 10937769 > 8ms
<7>[12487.971056] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[12488.038194] WQ_WARN: cpu:1, proc:kworker/u:3, dur: 11952846 > 8ms
<7>[12488.038222] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<3>[12488.277692] [WMT-IC][I]mt6620_patch_dwn:wmt_core: patch dwn:0 frag(43, 752) ok
<3>[12488.278626] [WMT-IC][I]mt6620_sw_init:Not to check the patch validity
<3>[12488.279788] [WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf12d030)
<3>[12488.287100] [WMT-IC][I]mt6620_sw_init:init_coex ok
<6>[12488.288216] [STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[12488.288230] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<3>[12488.288242] [WMT-IC][I]mt6620_sw_init:enable host STP-UART-FULL mode
<3>[12488.304305] [WMT-IC][I]mt6620_sw_init:set fm mode (2) ok
<6>[12488.304960] [STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[12488.304971] [STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[12488.304983] mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[12488.305653] board_sdio_ctrl force off before on
<6>[12488.305660] mtk_wcn_cmb_sdio_off (3)
<6>[12488.305700] mtk_wcn_cmb_sdio_on (3)
<3>[12488.305734] msdc3 -> USR Resume <- msdc_pm() : L<1260> PID
<3>[12488.322615] msdc3 -> ================ <- msdc_set_mclk() : L<756> PID
<3>[12488.323646] msdc3 -> !!! Set<400KHz> Source<197000KHz> -> sclk<397KHz> DDR<0> mode<0> div<124> <- msdc_set_mclk() : L<758> PID
<3>[12488.325288] msdc3 -> ================ <- msdc_set_mclk() : L<759> PID
<3>[12488.347924] msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1320> PID
<3>[12488.372772] msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<3218> PID
<3>[12488.373939] msdc3 -> ================ <- msdc_set_mclk() : L<756> PID
<3>[12488.374964] msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<758> PID
<3>[12488.376629] msdc3 -> ================ <- msdc_set_mclk() : L<759> PID
<6>[12488.378397] mmc2: new high speed SDIO card at address 0001
<6>[12488.380528] [WMT-DFT][I]hif_sdio_probe:start!
<6>[12488.380542] [WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x20a) num(0x1)
<6>[12488.380552] [WMT-DFT][I]hif_sdio_probe:card->info[0]: MediaTek MT6620 Wireless Combo Chip
<6>[12488.380562] [WMT-DFT][I]hif_sdio_probe:card->info[1]:
<6>[12488.380569] [WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[12488.380651] [WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(520192)
<7>[12488.380675] WQ_WARN: cpu:1, proc:kworker/u:3, dur: 72980539 > 8ms
<7>[12488.380691] work: mmc_rescan+0x0/0x370
<6>[12488.462424] [WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[12488.462518] [2:kthreadd] fork err at pid
<7>[12488.462539] [2:kthreadd] fork [9106:kthreadd]
<6>[12488.462562] [WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<5>[12488.462592] [wlan] net_device prDev(0xd1d5f000) allocated
<4>[12488.463566] [RT_MONITOR]WARNNING [9106:ksdioirqd/mmc2] SET NOT ALLOW RT Prio [1] for proc [9106:ksdioirqd/mmc2]
<4>[12488.465070] Backtrace:
<4>[12488.465506] [
<4>[12488.466702] r7:00000001 r6:00000000
<5>[12488.468027] [wlan] Open FW image: WIFI_RAM_CODE done
<4>[12488.469042] r5:d2cf8000 r4:d06fc800
<4>[12488.469494] [
<4>[12488.470618] [
<4>[12488.472037] [
<5>[12488.473785] [wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[12488.474690] [wlan] Virtual Address = ded55000 for COMMON MGMT MEMORY POOL.
<5>[12488.475534] [wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[12488.476192] [wlan] Virtual Address = ded57000 for SW_RFB_T.
<5>[12488.476877] [wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[12488.477570] [wlan] Virtual Address = ded5b000 for MSDU_INFO_T.
<6>[12488.478287] [wlan] wlanAdapterStart(): Acquiring LP-OWN
<4>[12488.478401] [
<4>[12488.479428] [
<4>[12488.480354] r7:00000013 r6:c0087f5c r5:c009f5dc r4:dd247d78
<6>[12488.492555] [wlan] Chip ID: 0x6620
<6>[12488.492571] [wlan] Revision ID: 0x1
<7>[12488.958835] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 20779692 > 8ms
<7>[12488.958873] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[12488.975510] WQ_WARN: cpu:1, proc:kworker/u:3, dur: 10742154 > 8ms
<7>[12488.975544] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[12489.042713] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 9978769 > 8ms
<7>[12489.042742] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<6>[12489.172942] [wlan] wlanAdapterStart(): Waiting for Ready bit..
<6>[12489.552449] [wlan] Ready bit asserted
<5>[12489.578931] [wlan] [wifi] wlan%d netif_carrier_off
<6>[12489.579633] [wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[12489.579712] [wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[12489.579795] [wlan] Domain: map=0, idx=0, code=0x0000
<7>[12489.582920] [2:kthreadd] fork err at pid
<7>[12489.582945] [2:kthreadd] fork [9107:kthreadd]
<5>[12489.582980] [wlan] tx_thread starts running...
<6>[12489.584754] [WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(20a) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[12489.584769] [WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[12489.584785] [WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[12489.586110] [STP-PSM] [I]_stp_psm_enable: PSM MODE Enable==============================>
<4>[12489.586117]
[STP-PSM] [I]_stp_psm_dump_active_q: Active op list:++
<4>[12489.587892] [STP-PSM] [I]_stp_psm_dump_active_q: STP_OPID_PSM_WAKEUP
<4>[12489.588681] [STP-PSM] [I]_stp_psm_dump_active_q: Active op list:--
<4>[12489.589465] [STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<4>[12489.592560] [STP-PSM] [I]_stp_psm_notify_wmt_wakeup_wq: OPID(1) type(0) bRet(1)
<4>[12489.592567]
<4>[12489.598705] [STP-PSM] [I]_stp_psm_do_wait: +Total waits for ACT takes 0 msec
<4>[12489.600799] [STP-PSM] [I]_stp_psm_enable: PSM MODE Enable<=============================
<4>[12489.600810]
<3>[12489.601980] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<7>[12489.605675] [9104:loadDriverThrea] exit
<7>[12489.615741] [163:netd] fork err at pid
<7>[12489.615772] [163:netd] fork [9108:netd]
<7>[12489.619866] [9108:netd] set proc[9108] name: ->[ip]
<7>[12489.628474] [9108:ip] exit
<7>[12489.628692] [9108:ip] sig 17 to [163:netd]
<7>[12489.637296] [8356:kworker/u:3] fork err at pid
<7>[12489.637321] [8356:kworker/u:3] fork [9109:kworker/u:3]
<7>[12489.638139] [9109:kworker/u:3] fork err at pid
<7>[12489.638167] [9109:kworker/u:3] fork [9110:kworker/u:3]
<7>[12489.638233] [9110:kworker/u:3] exit
<7>[12489.638267] [9110:kworker/u:3] sig 17 to [9109:kworker/u:3]
<7>[12489.638307] [9109:kworker/u:3] exit
<6>[12489.645630] [RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[12489.645660] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[12489.662947] WQ_WARN: cpu:0, proc:kworker/0:2, dur: 18753847 > 8ms
<7>[12489.663162] work: wlanSetMulticastListWorkQueue+0x0/0x1f4 [wlan]
<7>[12489.663892] [1:init] fork err at pid
<7>[12489.663915] [1:init] fork [9111:init]
<7>[12489.665356] [312:WifiStateMachin] fork err at pid
<7>[12489.665381] [312:WifiStateMachin] fork [9112:WifiStateMachin]
<7>[12489.665536] [9112:WifiStateMachin] set proc[9112] name: ->[WifiMonitor]
<7>[12489.673414] [9111:init] set proc[9111] name: ->[logwrapper]
<7>[12489.675558] [9111:logwrapper] fork err at pid
<7>[12489.675581] [9111:logwrapper] fork [9113:logwrapper]
<7>[12489.693628] [9113:logwrapper] set proc[9113] name: ->[wpa_supplicant]
<5>[12489.732713] [wlan] N=0 closed
<5>[12489.733144] [wlan] EVENT-ROAMING ABORT: Current Time = 12112700
<5>[12489.733885] [wlan] [13] TRANSITION: [0] -> [0]
<6>[12489.737899] [wlan] NAF=0,0,0
<6>[12489.737915] [wlan] NAF=0,0,0
<5>[12489.893492] [wlan] [13] TRANSITION: [0] -> [2]
<7>[12489.963549] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 19672615 > 8ms
<7>[12489.963577] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[12490.104277] [9046:AsyncTask #2] fork err at pid
<7>[12490.104313] [9046:AsyncTask #2] fork [9114:AsyncTask #2]
<7>[12490.115291] [9114:AsyncTask #2] set proc[9114] name: ->[dmesg]
#Thu Apr 25 10:31:25 ??????? ??????????? ????? 2013
ro.product.manufacturer=alps
ro.mediatek.gemini_support=true
ro.media.enc.mprof.vid.bps=990000
ro.service.swiqi.supported=true
ro.mediatek.version.release=ALPS.ICS.MP.V1.11
ro.crypto.fs_flags=0x00000406
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.file.format=3gp
ro.product.display_resolution=5 inch WVGA resolution
media.stagefright.enable-scan=false
ro.crypto.fs_options=noauto_da_alloc
ro.product.model=Haipai I9220
wifi.direct.interface=p2p0
ro.ril.hsupa.category=5
ro.mediatek.wlan.wsc=1
media.stagefright.enable-http=true
ro.ril.disable.power.collapse=0
ro.build.fingerprint=alps/e1809c_v75_lx528_sx/e1809c_v75_lx528_sx:4.0.6/IML74K/1340096866:user/test-keys
htc.audio.swalt.mingain=14512
ro.lge.proximity.delay=25
ro.build.product=e1809c_v75_lx528_sx
ro.setupwizard.mode=OPTIONAL
keyguard.no_require_sim=true
ro.build.version.sdk=15
persist.radio.fd.counter=20
net.bt.name=HaiPai_Phone
af.resampler.quality=255
ro.media.enc.hprof.aud.bps=12200
debug.composition.type=c2d
ro.media.enc.mprof.codec.aud=amrnb
launcherplus.allappsgrid=2d
persist.radio.fd.off.counter=20
ro.ril.enable.dtm=1
ro.build.host=bahe8-desktop
debug.sf.hw=1
ro.media.enc.lprof.aud.bps=12200
ro.build.display.id=HaiPai I9220
ro.audio.pcm.samplerate=48000
ro.media.enc.lprof.vid.height=144
persist.service.swiqi.enable=1
ro.max.fling_velocity=12000
ro.HOME_APP_ADJ=1
persist.telephony.support.ipv4=1
persist.telephony.support.ipv6=1
mediatek.wlan.ctia=0
ro.product.ram=512MB
persist.service.clearaudio.enable=1
ro.mot.buttonlight.timeout=0
ro.config.vc_call_vol_steps=20
ro.media.enc.hprof.codec.vid=m4v
ro.product.processor=1GHz MediaTek MT6575
ro.product.locale.region=US
wifi.interface=wlan0
persist.sys.timezone=
ro.ril.enable.sync.time=1
ro.ril.hep=1
ro.mediatek.platform=MT6575
ro.sf.hwrotation=1
persist.dev.pm.dyn_samplingrate=1
ro.kernel.checkjni=0
ro.media.enc.mprof.aud.ch=1
ro.media.enc.jpeg.quality=100
ro.mediatek.wlan.p2p=1
ro.media.enc.lprof.vid.bps=384000
ro.crypto.fs_type=ext4
ro.media.enc.mprof.codec.vid=m4v
ro.camera.sound.forced=1
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
ril.current.share_modem=2
ro.media.enc.hprof.vid.fps=30
mot.proximity.delay=25
net.tcp.buffersize.hsdpa=4096,87380,256960,4096,16384,256960
ro.ril.htcmaskw1=14449
ro.ril.hsdpa.category=10
ro.audio.samplerate=48000
ro.product.brand=Haipai
ro.mediatek.chip_ver=S01
ro.crypto.tmpfs_options=mode=0771,uid=1000,gid=1000
ro.ril.enable.fd.plmn.prefix=23402,23410,23411
wifi.supplicant_scan_interval=180
ro.config.notification_sound=TaDa.ogg
ro.build.date.utc=1340097031
ro.board.platform=
ro.media.enc.mprof.vid.height=288
ro.media.enc.lprof.codec.aud=amrnb
ro.product.main_camera=8mpx
persist.sys.purgeable_assets=1
ro.ril.hsxpa=2
ro.product.device=e1809c_v75_lx528_sx
ro.product.locale.language=en
persist.service.dmnorm.enable=1
ro.sys.usb.storage.type=mtp,mass_storage
htc.audio.alt.enable=0
persist.audio.samplerate=48000
ro.media.enc.mprof.aud.hz=8000
persist.sys.composition.type=c2d
persist.af.resample=48000
persist.service.clearphase.enable=1
persist.sys.ui.hw=1
ro.product.bluetooth=2.0
ro.build.characteristics=default
ro.build.id=IML74K
ro.ril.htcmaskw1.bitmask=4294967295
ro.media.enc.hprof.vid.height=480
ro.com.android.dateformat=dd-MM-yyyy
ro.product.front_camera=1.3mpx
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
ro.media.enc.lprof.vid.fps=30
af.resample=48000
rild.libpath=/system/lib/mtk-ril.so
ro.product.name=e1809c_v75_lx528_sx
ro.media.enc.mprof.vid.width=352
ro.build.flavor=
pm.sleep_mode=1
ro.build.tags=test-keys
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.lprof.aud.ch=1
ro.config.alarm_alert=Beeps.mp3
htc.audio.swalt.enable=1
ro.crypto.fs_mnt_point=/data
ro.mediatek.version.branch=ALPS.ICS.MP
ro.min.fling_velocity=8000
ro.product.board=e1809c_v75_lx528_sx
ro.build.description=e1809c_v75_lx528_sx-user 4.0.6 IML74K eng.root.1340096866 test-keys
curlockscreen=2
ro.build.version.codename=REL
ro.media.enc.mprof.file.format=3gp
persist.tegra.nvmmlite=1
ro.config.nocheckin=1
debug.performance.tuning=1
ro.somc.dmnorm.supported=true
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.lprof.codec.vid=h263
ro.product.cpu.abi=armeabi-v7a
rild.libargs=-d /dev/ttyC0
ro.media.enc.hprof.vid.width=720
launcher2.allappsgrid=3d_20
dalvik.vm.heapgrowthlimit=48m
ro.kernel.android.checkjni=0
wifi.tethering.interface=ap0
ro.sf.lcd_density=240
bp.optimized.by.AnDroid_Team_X=2148621
dalvik.vm.heapsize=128m
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.somc.clearphase.supported=true
persist.adb.notify=0
htc.audio.hac.enable=0
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
media.stagefright.enable-meta=true
ro.crypto.fs_real_blkdev=/emmc@usrdata
persist.android.strictmode=0
ro.media.enc.hprof.codec.aud=amrnb
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
ro.build.date=12/07/2012 17:10:31 CST
ro.ril.def.agps.feature=1
ro.ril.gprsclass=10
ro.semc.clearaudio.supported=true
ro.build.version.release=4.0.6
persist.af.resampler.quality=255
ro.ril.enable.3g.prefix=1
ro.custom.build.version=1340096866
ro.product.cpu.abi2=armeabi
drm.service.enabled=true
ro.ril.enable.a53=1
net.tcp.buffersize.hspa=4096,87380,256960,4096,16384,256960
ro.product.wifi=802.11 b/g/n
windowsmgr.max_events_per_sec=160
ro.build.user=root
ro.opengles.version=131072
ro.ril.enable.gea3=1
media.stagefright.enable-player=true
ro.media.enc.lprof.aud.hz=8000
ro.config.ringtone=Pegasus.ogg
ro.build.type=user
ro.media.enc.hprof.aud.ch=1
touch.presure.scale=0.001
ro.build.version.incremental=eng.root.1340096866
ro.wifi.channels=
persist.audio.pcm.samplerate=48000
ro.media.enc.hprof.file.format=3gp
ro.ril.def.agps.mode=2
ro.media.enc.mprof.vid.fps=30
ro.audio.silent=0
ro.telephony.call_ring.delay=0
wlan 285284 0 - Live 0xbf1e3000 (P)
cfg80211 122425 0 - Live 0xbf1ba000
mtk_fm_priv 8909 0 - Live 0xbf1b4000 (P)
mt6620_fm_drv 111369 1 mtk_fm_priv, Live 0xbf18c000
mtk_stp_bt 39718 0 - Live 0xbf17f000
mtk_stp_gps 37190 0 - Live 0xbf172000
mtk_stp_uart 21669 0 - Live 0xbf169000 (P)
mtk_stp_wmt 343806 7 wlan,mtk_fm_priv,mt6620_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf108000 (P)
mtk_hif_sdio 18042 2 wlan,mtk_stp_wmt, Live 0xbf0ff000
devinfo 748 0 - Live 0xbf0fb000 (P)
sec 109563 0 - Live 0xbf0da000 (P)
mt6575_vcodec_kernel_driver 23817 2 - Live 0xbf0cf000 (P)
mt6575_m4u 108821 6 - Live 0xbf0ab000 (P)
ccmni 17214 0 - Live 0xbf0a2000 (P)
ccci 137954 15 ccmni, Live 0xbf075000 (P)
ccci_plat 125084 3 sec,ccmni,ccci, Live 0xbf04e000 (P)
mtk_drvb 5115 0 - Live 0xbf049000 (P)
mtklfb 14369 0 - Live 0xbf041000
pvrsrvkm 163615 111 mtklfb, Live 0xbf00d000
alps_core 2221 0 - Live 0xbf009000 (P)
aed 15834 3 - Live 0xbf000000 (P)
RAM: 512 MB (486 MB available)
System RAM: 486.000MB
mtkfb.0: 4.000MB
Flash: 4 GB (3.600 GB actual); 16 GB (14.833 GB actual)
mmcblk0: 3.600 GB
mmcblk1: 14.833 GB
Тачскрин для alps Haipai I9220
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
Новый аккумулятор для alps Haipai I9220
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
Чехлы для alps Haipai I9220
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
Найти похожие устройства | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |