一般规格 | |
---|---|
生产厂家 | kyocera |
型号 | C5170 |
Android版 | 4.0.4; release.20130807.141654; SDK15 |
中央处理单元 | 1 core; QCT MSM8X55 SURF msm7630_surf; Max: 1024.0 MHz; Min: 122.9 MHz |
显示 | 480 x 320; DPI: 160; Evaluated Size: 3.6" |
触摸屏 | Multitouch 2 points |
图形处理器 | Adreno (TM) 205; Qualcomm; OpenGL ES-CM 1.1; OpenGL ES 2.0 2184622 |
内存RAM | 382 MB |
快闪记忆体 | 2 GB Build-in (1.863 GB actual); 2 GB (1.842 GB actual) |
沟通 | |
电话 | CDMA; Net: EVDO_A |
WiFi | wlan; IEEE 802.11 n; Qualcomm WCN1312™ |
USB主机 | Yes |
蓝牙 | Yes |
全球定位系统 | Yes |
高级功能 | |
前置摄像头 | Photo: 3.1 MP; Max: 2048x1536; Video: 0.4 MP; Max: 800x480; Focus: infinity; Flash modes: off auto on torch |
背照相机 | No |
传感器 | BMA250 Acceleration Sensor (Bosch Sensortec); range: 0...19.613; resolution: 0.038 (0.195%); power: 0.13mA; |
MS-3R (YAS532) Magnetic Sensor (Yamaha Corporation); range: 0...1200; resolution: 0.3 (0.025%); power: 4mA; | |
APDS9900 Light Sensor (Avago Technologies Co.); range: 0...900; resolution: 15 (1.667%); power: 0.175mA; | |
APDS9900 Proximity Sensor (Avago Technologies Co.); range: 0...4; resolution: 1 (25%); power: 0.175mA; | |
Gravity Sensor (unknown); range: 0...19.613; resolution: 0.038 (0.195%); power: 0.13mA; | |
Linear Acceleration Sensor (unknown); range: 0...19.613; resolution: 0.038 (0.195%); power: 0.13mA; | |
Rotation Vector Sensor (unknown); range: 0...1; resolution: 0 (0%); power: 0.43mA; | |
震动模式 | Yes |
支持的语言 | 40; Arabic; Bulgarian; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Vietnamese; Chinese |
电池 | Technology: Li-ion; Voltage: 3827 |
SD Version: | 1.1 5 |
KERNEL: Linux version 3.0.8-perf (release@release) (gcc version 4.4.3 (GCC) ) #1 PREEMPT Wed Aug 7 14:26:30 JST 2013
CODENAME: REL
Mainboard: C5170
BRAND: kyocera
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: C5170
DISPLAY: IML77
FINGERPRINT: kyocera/C5170/C5170:4.0.4/IML77/release.20130807.141654:user/release-keys
HARDWARE: qcom
ID: IML77
TAGS: release-keys
Processor : ARMv7 Processor rev 2 (v7l)
BogoMIPS : 680.75
Features : swp half thumb fastmult vfp edsp neon vfpv3 tls
CPU implementer : 0x51
CPU architecture: 7
CPU variant : 0x1
CPU part : 0x00f
CPU revision : 2
Hardware : QCT MSM8X55 SURF
Revision : 0000
Serial : 0000000000000000
GL_AMD_compressed_ATC_texture
GL_AMD_performance_monitor
GL_AMD_program_binary_Z400
GL_EXT_texture_filter_anisotropic
GL_EXT_texture_format_BGRA8888
GL_EXT_texture_type_2_10_10_10_REV
GL_NV_fence
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_depth_texture
GL_OES_depth24
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_element_index_uint
GL_OES_fbo_render_mipmap
GL_OES_fragment_precision_high
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_rgb8_rgba8
GL_OES_standard_derivatives
GL_OES_texture_3D
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_texture_half_float_linear
GL_OES_texture_npot
GL_OES_vertex_half_float
GL_OES_vertex_type_10_10_10_2
GL_OES_vertex_array_object
GL_QCOM_alpha_test
GL_QCOM_binning_control
GL_QCOM_driver_control
GL_QCOM_perfmon_global_mode
GL_QCOM_extended_get
GL_QCOM_extended_get2
GL_QCOM_tiled_rendering
GL_QCOM_writeonly_rendering
GL_AMD_compressed_3DC_texture
<4>[21947.508605] msm_batt_oem_update_status_cb() called
<4>[21948.458374] wifi_sleep_clock_initialize occured.
<4>[21948.473754] size = 0x0000031c
<4>[21948.475921] kcj_kfree(): Start.[ptr = 0xc895e800]
<6>[21948.476898] libra_sdioif_init: Loaded Successfully
<3>[21948.559265] KCJ WLAN SDIO is disabled.
<4>[21948.936981] select 8706 (d.process.acore), adj 11, size 5838, to kill
<4>[21948.937011] send sigkill to 8706 (d.process.acore), adj 11, size 5838
<4>[21948.958526] size = 0x00004400
<4>[21949.298431] kcj_kfree(): Start.[ptr = 0xcae10000]
<6>[21949.299163] wlan: loading driver v0.2.2.578
<3>[21949.657196] KCJ WLAN SDIO is disabled.
<3>[21949.720306] TCXO is now slave to clk_pwr_req
<3>[21949.738616] 3.05V Supply Enabled
<3>[21949.738616] 1.2V AON Supply Enabled
<3>[21949.759796] WLAN is out of reset
<3>[21949.798583] 1.2V sw is enabled
<3>[21950.129364] 1.3V sw is enabled
<3>[21950.129394] [9524:F :HDD] hdd_module_init: Libra WLAN not detected yet.
<3>[21950.388916] [9524:F :HDD] hdd_module_init: Libra WLAN not detected yet.
<3>[21950.649169] [9524:F :HDD] hdd_module_init: Libra WLAN not detected yet.
<4>[21950.708740] select 8924 (.zgz.supervideo), adj 11, size 4898, to kill
<4>[21950.708740] send sigkill to 8924 (.zgz.supervideo), adj 11, size 4898
<6>[21950.720397] mmc1: new high speed SDIO card at address 0002
<6>[21950.721801] libra_sdio_probe: success with block size of 256 device_id=0x2881
<3>[21950.908630] [9524:F :HDD] hdd_module_init: Libra WLAN detecton succeeded
<4>[21950.943847] wifi macaddr is good
<4>[21951.026641] Thread-186: page allocation failure: order:3, mode:0x10d0
<4>[21951.026702] [
<4>[21951.026733] [
<4>[21951.026733] [
<4>[21951.026763] [
<4>[21951.027709] [
<4>[21951.029022] [
<4>[21951.036712] [
<4>[21951.038024] [
<4>[21951.039306] [
<4>[21951.044464] [
<4>[21951.044708] [
<4>[21951.044738] [
<4>[21951.044738] Mem-info:
<4>[21951.044738] Normal per-cpu:
<4>[21951.044769] CPU 0: hi: 186, btch: 31 usd: 67
<4>[21951.044769] active_anon:63679 inactive_anon:85 isolated_anon:0
<4>[21951.044769] active_file:4184 inactive_file:4406 isolated_file:0
<4>[21951.044799] unevictable:94 dirty:0 writeback:0 unstable:0
<4>[21951.044799] free:1005 slab_reclaimable:892 slab_unreclaimable:3211
<4>[21951.044799] mapped:8075 shmem:99 pagetables:3162 bounce:0
<4>[21951.044830] Normal free:4020kB min:2468kB low:3084kB high:3700kB active_anon:254716kB inactive_anon:340kB active_file:16736kB inactive_file:17624kB unevictable:376kB isolated(anon):0kB isolated(file):0kB present:380944kB mlocked:0kB dirty:0kB writeback:0kB mapped:32300kB shmem:396kB slab_reclaimable:3568kB slab_unreclaimable:12844kB kernel_stack:6552kB pagetables:12648kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
<4>[21951.044860] lowmem_reserve[]: 0 0 0
<4>[21951.044891] Normal: 915*4kB 37*8kB 4*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 4020kB
<4>[21951.044921] 8783 total pagecache pages
<4>[21951.053161] 113408 pages of RAM
<4>[21951.053161] 2145 free pages
<4>[21951.053192] 21923 reserved pages
<4>[21951.053192] 4103 slab pages
<4>[21951.053192] 209260 pages shared
<4>[21951.053192] 0 pages swap cached
<4>[21951.055816] select 9278 (id.defcontainer), adj 9, size 4819, to kill
<4>[21951.055847] select 9295 (id.partnersetup), adj 10, size 4982, to kill
<4>[21951.055847] select 9308 (android.musicfx), adj 11, size 4807, to kill
<4>[21951.055877] send sigkill to 9308 (android.musicfx), adj 11, size 4807
<4>[21951.058624] wifi_drv: size = 27136, mem = 0xc7f78000
<6>[21952.151672] wlan: driver loaded
<4>[21952.165649] select 9278 (id.defcontainer), adj 9, size 4791, to kill
<4>[21952.165679] select 9295 (id.partnersetup), adj 10, size 4950, to kill
<4>[21952.165679] select 9322 (onlabs.v3client), adj 10, size 4998, to kill
<4>[21952.165710] select 9353 (com.sprint.zone), adj 10, size 5392, to kill
<4>[21952.165710] send sigkill to 9353 (com.sprint.zone), adj 10, size 5392
<4>[21952.475189] select 9278 (id.defcontainer), adj 9, size 4773, to kill
<4>[21952.475219] select 9295 (id.partnersetup), adj 10, size 4939, to kill
<4>[21952.475250] select 9322 (onlabs.v3client), adj 10, size 4991, to kill
<4>[21952.475250] send sigkill to 9322 (onlabs.v3client), adj 10, size 4991
<4>[21952.518859] msm_batt_oem_update_status_cb() called
<4>[21952.782226] select 9278 (id.defcontainer), adj 10, size 4770, to kill
<4>[21952.782257] select 9295 (id.partnersetup), adj 10, size 4937, to kill
<4>[21952.782287] send sigkill to 9295 (id.partnersetup), adj 10, size 4937
<4>[21953.442993] select 9278 (id.defcontainer), adj 10, size 4769, to kill
<4>[21953.442993] select 9393 (android.vending), adj 10, size 5969, to kill
<4>[21953.443023] send sigkill to 9393 (android.vending), adj 10, size 5969
<4>[21953.661865] wifi_sleep_clock_initialize occured.
<4>[21954.628967] kcj_dev_info_update_wlan() dev_info_wlan:1
<4>[21954.628967] --- Wifi state change occured.[1]
<6>[21954.631072] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<4>[21954.979034] select 9278 (id.defcontainer), adj 10, size 4797, to kill
<4>[21954.979064] select 9339 (oid.voicedialer), adj 11, size 4709, to kill
<4>[21954.979064] send sigkill to 9339 (oid.voicedialer), adj 11, size 4709
<6>[21955.325683] wlan: connected to 38:60:77:24:8b:5b
<6>[21955.326446] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<4>[21955.654266] select 9278 (id.defcontainer), adj 11, size 4797, to kill
<4>[21955.654296] send sigkill to 9278 (id.defcontainer), adj 11, size 4797
<4>[21955.909332] select 9485 (droid.gallery3d), adj 10, size 5908, to kill
<4>[21955.909362] send sigkill to 9485 (droid.gallery3d), adj 10, size 5908
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IML77
ro.build.display.id=IML77
ro.build.version.incremental=release.20130807.141654
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=Wed Aug 7 14:17:21 JST 2013
ro.build.date.utc=1375852641
ro.build.type=user
ro.build.user=release
ro.build.host=release
ro.build.tags=release-keys
ro.product.model=C5170
ro.product.brand=kyocera
ro.product.name=C5170
ro.product.device=C5170
ro.product.board=C5170
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=kyocera
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm7630_surf
# ro.build.product is obsolete; use ro.product.device
ro.build.product=C5170
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=C5170-user 4.0.4 IML77 release.20130807.141654 release-keys
ro.build.fingerprint=kyocera/C5170/C5170:4.0.4/IML77/release.20130807.141654:user/release-keys
ro.build.characteristics=default
ro.build.internalswversion=1.010BT.06.a
ro.build.swversion=1.010BT
# end build properties
#
# system.prop for surf
#
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV
DEVICE_PROVISIONED=1
debug.sf.hw=1
dalvik.vm.heapsize=24m
dev.pm.dyn_samplingrate=1
#
# system props for the cne module
#
persist.cne.UseCne=vendor
persist.cne.UseSwim=false
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
persist.cne.sync.swim.mode=false
#
lpa.decode=true
ro.hdmi.enable=true
#
# system props for the data modules
#
ro.use_data_netmgrd=true
#
# system props for SD card emulation of emmc partition
#
ro.emmc.sdcard.partition=16
#
# system props for telephony modules
#
#device supports EHRPD
ro.config.ehrpd=false
#
# system props for the MM modules
#
media.stagefright.enable-player=true
media.stagefright.enable-meta=false
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
lpa.use-stagefright=true
#
# system prop for opengles version
#
ro.opengles.version=131072
#
# system prop for Bluetooth Dialup Networking
#
ro.qualcomm.bluetooth.dun=true
#
# system prop for Bluetooth Auto connect for remote initated connections
#
ro.bluetooth.remote.autoconnect=true
#
# System prop to disable strict mode flash on display
#
persist.sys.strictmode.visual=false
#
# system prop for multi rild (DSDS case)
#
ro.multi.rild=false
#
# system prop for Bluetooth FTP profile
#
ro.qualcomm.bluetooth.ftp=false
#
# system property for Bluetooth discoverability time out in seconds
# 0: Always discoverable
#debug.bt.discoverable_time=0
#
# system prop for requesting Master role in incoming Bluetooth connection.
#
ro.bluetooth.request.master=true
#
# system property to enforce Phone Mode view
#
ro.screen.layout=normal
#
#System prop for disabling the meta data mode for encoder
#
debug.camcorder.disablemeta=0
#
# Simulate sdcard on /data/media
#
persist.fuse_sdcard=false
# Turn off tiled rendering
#
debug.enabletr=false
#
# System prop for using landscape preview layout in camera
#
debug.camera.landscape=true
#
# System prop for capping scroll velocity
#
ro.max.fling_velocity=4000
#
# System prop for max evnet per sec
#
windowsmgr.max_events_per_sec=60
#
# System prop for Chameleon
#
ro.com.google.clientidbase=android-kyocera
ro.com.google.clientidbase.ms=android-boost-us
ro.com.google.clientidbase.yt=android-boost-us
ro.com.google.clientidbase.am=android-boost-us
ro.com.google.clientidbase.gmm=android-boost-us
ro.cdma.home.operator.alpha=Boost Mobile
ro.cdma.home.operator.numeric=311870
#
# keep AlternativeUpdate
#
sys.keep_app_1=com.kyocera.sysupdater
#
# ADDITIONAL_BUILD_PROPERTIES
#
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=36m
dalvik.vm.heapsize=128m
keyguard.no_require_sim=true
ro.com.android.dataroaming=false
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=CurveBall.ogg
ro.config.notification_sound=DontPanic.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.vendor.extension_library=/system/lib/libqc-opt.so
drm.service.enable=true
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=4.0_r8
ro.camera.sound.forced=1
drm.service.enabled=true
persist.sys.ringermode=2
persist.sys.language=en
persist.sys.country=US
persist.timed.enable=true
browser.management=false
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
wlan 2033411 0 - Live 0xbf00a000 (P)
librasdioif 7755 1 wlan, Live 0xbf002000
monkey_device 1540 0 - Live 0xbf000000
RAM: 382 MB
System RAM: 60.000MB
System RAM: 66.000MB
System RAM: 256.000MB
Flash: 2 GB Build-in (1.863 GB actual); 2 GB (1.842 GB actual)
mmcblk0: 1.863 GB
mmcblk1: 1.842 GB
触摸屏为 kyocera C5170
$253.73 1set Original Pickup Roller for Kyocera KM 3500i 4500i 5500i 4501i 5501i 3501i 303LL07531 303LL07190 303M407480
$1.47 1pc Original Pickup Roller for Kyocera TASKalfa 1800 1801 2200 2201 302NG94131
$31.82 New REFURBISH Kyocera IB-33 Network Interface Kit for:TASKalfa 1801 2201 2011 2211
$1.96 1set Original Pickup Roller kit for Kyocera TASKalfa 1800 1801 2200 2201 2010 2011 2210 2211 302F906230 302F909171 302NG94120
$34.96 1PC DV6308 DV-6308 Developer powder For Kyocera 3501i 4501i 5501i 5501i 6501i 8000i Developers
$1.18 1Set Paper Pickup Roller Kit for Kyocera TASKalfa 4501 3501i 5501i 6501i 8001i TA4501i 302N406030 302N406040 302N406030
$100.68 1pcs printer board printer card for Kyocera Taskalfa 180 181 220 221 KM 180 100% test shipment
$188.43 1set DK5195 DK5140 drum rebuilt kit For Kyocera TASKalfa 306ci 356ci M6230 M6630 M6235 M6635 M6030 M6530 M6035 M6535
$205.2 1503S50UN0 IB-36 Direct Card for Kyocera P3045dn P3050dn P3055dn Direct Wi-Fi Interface Original 3 Months Warranty
$189.9 for Kyocera Original New ECOSYS P3050 / P3055 / P3060 Drum Unit DK-3190 / 302T693031
$198 1PC Original High Voltage Board for Kyocera TASKalfa 1800 1801 2200 2201 2010 2011 2210 2211 3 Months Warranty
$13.25 1set Original Pickup Roller kit for Kyocera TASKalfa 1800 1801 2200 2201 2010 2011 2210 2211 302F906230 302F909171 302NG94120
$153 1PC Original Printer Board Printer Card for Kyocera Taskalfa 180 181 220 221 1635 2035 1648 2550 3 Months Warranty
$300 DK-173 For Kyocera FS 1320D 1370DN ECOSYS P2135d P2135dn Drum Unit
$3.34 1Set Paper Pickup Roller Kit for Kyocera TASKalfa 4501 3501i 5501i 6501i 8001i TA4501i 302N406030 302N406040 302N406030
$426.56 1pcs. MK-410 MK-413 Black Drum Unit MK 413 DRUM ASSEMBLY Drum Cartridge for Kyocera KM 1620 1650 2020 2050 302C982010 2C982010
$11.71 1SETS ADF Pickup Roller For Kyocera TA 4002i 5002i 6002i 3011i KM 8030 6030 4050 5050 3050 520i 420i 820 303LL07190 303M407480
$370 FK-6722 302NJ93060 Fuser Kit For Kyocera TASKalfa 7002i 7003i 8002i 8003i 9002i 9003i Fuser Unit
$24.08 Used well Kyocera 1503JR8KS0 Scan System F(B) for: TASKalfa 181 221
$25.12 1PC Original Printer Board Printer Card for Kyocera 1635 KM1635 1648 2035 3 Months Warranty
新电池 kyocera C5170
$34.96 1PC DV6308 DV-6308 Developer powder For Kyocera 3501i 4501i 5501i 5501i 6501i 8000i Developers
$253.73 1set Original Pickup Roller for Kyocera KM 3500i 4500i 5500i 4501i 5501i 3501i 303LL07531 303LL07190 303M407480
$31.82 New REFURBISH Kyocera IB-33 Network Interface Kit for:TASKalfa 1801 2201 2011 2211
$1.47 1pc Original Pickup Roller for Kyocera TASKalfa 1800 1801 2200 2201 302NG94131
$1.96 1set Original Pickup Roller kit for Kyocera TASKalfa 1800 1801 2200 2201 2010 2011 2210 2211 302F906230 302F909171 302NG94120
$1.18 1Set Paper Pickup Roller Kit for Kyocera TASKalfa 4501 3501i 5501i 6501i 8001i TA4501i 302N406030 302N406040 302N406030
$100.68 1pcs printer board printer card for Kyocera Taskalfa 180 181 220 221 KM 180 100% test shipment
$188.43 1set DK5195 DK5140 drum rebuilt kit For Kyocera TASKalfa 306ci 356ci M6230 M6630 M6235 M6635 M6030 M6530 M6035 M6535
$189.9 for Kyocera Original New ECOSYS P3050 / P3055 / P3060 Drum Unit DK-3190 / 302T693031
$13.25 1set Original Pickup Roller kit for Kyocera TASKalfa 1800 1801 2200 2201 2010 2011 2210 2211 302F906230 302F909171 302NG94120
$153 1PC Original Printer Board Printer Card for Kyocera Taskalfa 180 181 220 221 1635 2035 1648 2550 3 Months Warranty
$370 FK-6722 302NJ93060 Fuser Kit For Kyocera TASKalfa 7002i 7003i 8002i 8003i 9002i 9003i Fuser Unit
$198 1PC Original High Voltage Board for Kyocera TASKalfa 1800 1801 2200 2201 2010 2011 2210 2211 3 Months Warranty
$3.34 1Set Paper Pickup Roller Kit for Kyocera TASKalfa 4501 3501i 5501i 6501i 8001i TA4501i 302N406030 302N406040 302N406030
$426.56 1pcs. MK-410 MK-413 Black Drum Unit MK 413 DRUM ASSEMBLY Drum Cartridge for Kyocera KM 1620 1650 2020 2050 302C982010 2C982010
$24.08 Used well Kyocera 1503JR8KS0 Scan System F(B) for: TASKalfa 181 221
$300 DK-173 For Kyocera FS 1320D 1370DN ECOSYS P2135d P2135dn Drum Unit
$25.12 1PC Original Printer Board Printer Card for Kyocera 1635 KM1635 1648 2035 3 Months Warranty
$205.2 1503S50UN0 IB-36 Direct Card for Kyocera P3045dn P3050dn P3055dn Direct Wi-Fi Interface Original 3 Months Warranty
$11.71 1SETS ADF Pickup Roller For Kyocera TA 4002i 5002i 6002i 3011i KM 8030 6030 4050 5050 3050 520i 420i 820 303LL07190 303M407480
占地面积 kyocera C5170
$31.82 New REFURBISH Kyocera IB-33 Network Interface Kit for:TASKalfa 1801 2201 2011 2211
$1.47 1pc Original Pickup Roller for Kyocera TASKalfa 1800 1801 2200 2201 302NG94131
$1.96 1set Original Pickup Roller kit for Kyocera TASKalfa 1800 1801 2200 2201 2010 2011 2210 2211 302F906230 302F909171 302NG94120
$253.73 1set Original Pickup Roller for Kyocera KM 3500i 4500i 5500i 4501i 5501i 3501i 303LL07531 303LL07190 303M407480
$34.96 1PC DV6308 DV-6308 Developer powder For Kyocera 3501i 4501i 5501i 5501i 6501i 8000i Developers
$1.18 1Set Paper Pickup Roller Kit for Kyocera TASKalfa 4501 3501i 5501i 6501i 8001i TA4501i 302N406030 302N406040 302N406030
$100.68 1pcs printer board printer card for Kyocera Taskalfa 180 181 220 221 KM 180 100% test shipment
$3.34 1Set Paper Pickup Roller Kit for Kyocera TASKalfa 4501 3501i 5501i 6501i 8001i TA4501i 302N406030 302N406040 302N406030
$426.56 1pcs. MK-410 MK-413 Black Drum Unit MK 413 DRUM ASSEMBLY Drum Cartridge for Kyocera KM 1620 1650 2020 2050 302C982010 2C982010
$11.71 1SETS ADF Pickup Roller For Kyocera TA 4002i 5002i 6002i 3011i KM 8030 6030 4050 5050 3050 520i 420i 820 303LL07190 303M407480
$300 DK-173 For Kyocera FS 1320D 1370DN ECOSYS P2135d P2135dn Drum Unit
$198 1PC Original High Voltage Board for Kyocera TASKalfa 1800 1801 2200 2201 2010 2011 2210 2211 3 Months Warranty
$153 1PC Original Printer Board Printer Card for Kyocera Taskalfa 180 181 220 221 1635 2035 1648 2550 3 Months Warranty
$13.25 1set Original Pickup Roller kit for Kyocera TASKalfa 1800 1801 2200 2201 2010 2011 2210 2211 302F906230 302F909171 302NG94120
$205.2 1503S50UN0 IB-36 Direct Card for Kyocera P3045dn P3050dn P3055dn Direct Wi-Fi Interface Original 3 Months Warranty
$189.9 for Kyocera Original New ECOSYS P3050 / P3055 / P3060 Drum Unit DK-3190 / 302T693031
$25.12 1PC Original Printer Board Printer Card for Kyocera 1635 KM1635 1648 2035 3 Months Warranty
$370 FK-6722 302NJ93060 Fuser Kit For Kyocera TASKalfa 7002i 7003i 8002i 8003i 9002i 9003i Fuser Unit
$188.43 1set DK5195 DK5140 drum rebuilt kit For Kyocera TASKalfa 306ci 356ci M6230 M6630 M6235 M6635 M6030 M6530 M6035 M6535
$24.08 Used well Kyocera 1503JR8KS0 Scan System F(B) for: TASKalfa 181 221
Find Similar devices | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |