1. Install SpecDevice
2. Run and decode your specs
3. Get your link (read more...)
General Specifications | |
---|---|
Manufacturer | TCT |
Model | ALCATEL ONE TOUCH 4010x |
Firmware | 2.3.6; vCB7-0; SDK10 |
CPU | 1 core; ARMv7 Processor rev 10 (v7l) |
Display | 480 x 320; DPI: 160; Evaluated Size: 3,6" |
Touch screen | Multitouch 2 points |
GPU | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.7@276259 |
RAM | 256 MB (232 MB available) |
Flash | 16 GB Build-in (14.641 GB actual); 0.5 GB (0.479 GB actual) |
Communications | |
Phone | GSM; Net: UMTS |
WiFi | lca_core; IEEE 802.11 b/g/n; MediaTek MT6628; AP Mode |
USB Host | Yes |
Bluetooth | Bluetooth 3.0+HS, 4.0 |
GPS | Yes |
Advanced Features | |
Front camera | Photo: 3.1 MP; Max: 2048x1536; Focus: infinity; No flash |
Back camera | No |
Sensors | bma222e 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; |
tmd2772 Proximity Sensor (Capella); range: 0...1; resolution: 1 (100%); power: 0,13mA; | |
tmd2772 Light Sensor (Capella); range: 0...10240; resolution: 1 (0,01%); power: 0,13mA; | |
Gravity Sensor (Google Inc.); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; | |
Linear Acceleration Sensor (Google Inc.); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; | |
Rotation Vector Sensor (Google Inc.); range: 0...1; resolution: 0 (0%); power: 0,13mA; | |
Vibrator | Yes |
Supported languages | 41; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Portuguese; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
Battery | Technology: Li-ion; Voltage: 3745 |
FM radio | Supported by chipset |
Owner's comment: | ALCATEL ONE TOUCH 4010x |
SD Version: | 1.1 5 |
KERNEL: Linux version 2.6.35.7 (int@int-183) (gcc version 4.4.3 (GCC) ) #1 PREEMPT Thu Dec 5 18:02:28 CST 2013
CODENAME: REL
Mainboard: Beetle_Lite
BRAND: TCT
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: Beetle_Lite_GSM
DISPLAY: ALPS.GB2.MP.V2.24
FINGERPRINT: TCT/Beetle_Lite/Beetle_Lite_GSM:2.3.6/GRK39F/vCB7-0:user/release-keys
HARDWARE: mt6575
ID: GRK39F
TAGS: release-keys
Processor : ARMv7 Processor rev 10 (v7l)
BogoMIPS : 1998.84
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc09
CPU revision : 10
Hardware : MT6575
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_stream2
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<7>[ 5102.453058] [SYSRAM][EanbleSwitchBank]MFG to SYSRAM, SWITCH_BANK = 0x00000000, u4AllocatedTbl = 0x00000000
<7>[ 5102.461755] [9586:dmesg] exit
<7>[ 5102.461936] [9586:dmesg] sig 17 to [9571:AsyncTask #1]
<7>[ 5102.591656] [SYSRAM][EanbleSwitchBank]SYSRAM to MFG, SWITCH_BANK = 0x00000007, u4AllocatedTbl = 0x00000000
<6>[ 5102.806732] [WLAN] rfkill_set_block(blocked 1)
<6>[ 5102.806743] [WLAN] Power off
<3>[ 5102.806758] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(4) type(3) start
<4>[ 5102.806783] [STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<6>[ 5102.806826] src = COMBO_IF_UART, to enter deep idle? 0
<4>[ 5102.817119] [STP-PSM] [I]_stp_psm_do_wait: STP is waiting state for ACT, i=1
<6>[ 5102.817160] [WMT-DFT][I]hif_sdio_wifi_off:start!
<5>[ 5102.817175] [wlan] Remove wlan!
<5>[ 5102.817225] [wlan]
<1>[ 5102.817231] tx_thread should stop now...
<3>[ 5102.817239] [wlan] OID Timeout! Releasing pending OIDs ..
<5>[ 5102.817250] [wlan] mtk_sdiod stops
<7>[ 5102.817263] [5902:tx_thread] exit
<5>[ 5102.817300] [wlan] mtk_sdiod stopped
<7>[ 5102.852761] [8829:Smack Packet Ha] exit
<6>[ 5102.862190] [wlan] QM: Enter qmFlushRxQueues()
<6>[ 5102.862583] [wlan] QM: Enter qmFlushTxQueues()
<5>[ 5102.862639] [wlan] Number of Stalled Packets = 0
<7>[ 5102.868665] [421:NativeDaemonCon] fork [9587:NativeDaemonCon]
<7>[ 5102.874500] [9587:NativeDaemonCon] set proc[9587] name: -> [Thread-609]
<7>[ 5102.877970] [9587:Thread-609] exit
<5>[ 5102.909995] [Power/Alarm] alarm 2 set 5297.220000000
<7>[ 5102.911727] [2799:GTalkConnWorker] fork [9588:GTalkConnWorker]
<7>[ 5102.911782] [9588:GTalkConnWorker] set proc[9588] name: -> [close-XMPP-conn]
<7>[ 5103.001797] [8828:Smack Packet Re] sig 13 to [8828:Smack Packet Re]
<7>[ 5103.006359] [8828:Smack Packet Re] exit
<7>[ 5103.051919] [9588:close-XMPP-conn] exit
<5>[ 5103.117099] [wlan] unregisterdev(0xc73dc000)
<6>[ 5103.117160] [WMT-DFT][I]hif_sdio_wifi_off:ok!
<7>[ 5103.117187] [5901:ksdioirqd/mmc1] exit
<6>[ 5103.117267] [WMT-DFT][I]hif_sdio_wifi_off:sdio_release_irq() for wifi ok
<4>[ 5103.117282] mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[ 5103.117290] mtk_wcn_cmb_sdio_off (3)
<3>[ 5103.117300] msdc3 -> USR Suspend <- msdc_pm() : L<1208> PID
<6>[ 5103.117360] [WMT-DFT][I]hif_sdio_remove:start!
<6>[ 5103.117407] [WMT-DFT][I]hif_sdio_remove:sdio func(0xc9c0c480) is removed successfully!
<6>[ 5103.117486] mmc1: card 0001 removed
<3>[ 5103.137125] msdc3 -> save latch data<1> cmd<1> <- msdc_ops_set_ios() : L<2983> PID
<3>[ 5103.137141] msdc3 -> set mclk to 0 <- msdc_set_mclk() : L<646> PID
<3>[ 5103.137259] [WMT-CORE][I]opfunc_func_off:WMT-CORE:Fun(3) [POWER_OFF] and power down chip
<4>[ 5103.137279] [STP-PSM] [I]_stp_psm_is_redundant_active_op: redundant opId found, opId(1), preOpid(1)
<6>[ 5103.137301] [STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[ 5103.137313] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[ 5103.137324] [STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[ 5103.137332] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(1)
<4>[ 5103.137345] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[ 5103.137355] Flush type = 4 Rx Queue
<3>[ 5103.157229] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(close_stp) result(0)
<3>[ 5103.157247] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, hw_pwr_off start
<3>[ 5103.157259] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, BGF_EINT IRQ unregistered and disabled
<3>[ 5103.157274] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, ALL_EINT IRQ unregistered and disabled
<3>[ 5103.157288] [WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[ 5103.157301] [WMT-PLAT][I]wmt_plat_i2s_ctrl:[MT662x]warnning:FM digital mode is not set, no I2S GPIO settings should be modified by combo driver
<3>[ 5103.157314] [WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<3>[ 5103.157325] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[ 5103.157335] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, hw_pwr_off finish
<3>[ 5103.157345] [WMT-CORE][W]opfunc_pwr_off:HW_PWR_OFF ok
<3>[ 5103.157359] [WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC OFF]status(b:0 f:0 g:0 w:0 lpbk:0 coredump:0 wmt:0 sd1:0 sd2:0 stp:0)
<6>[ 5103.157392] [STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[ 5103.157410] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(4) type(3) ok
<7>[ 5103.179758] [380:er.ServerThread] fork [9589:er.ServerThread]
<6>[ 5103.182335] [WLAN] rfkill_set_block(blocked 0)
<6>[ 5103.182345] [WLAN] Power on
<3>[ 5103.182359] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[ 5103.182376] [STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[ 5103.183823] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[ 5103.183838] [WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(not defined)
<3>[ 5103.183847] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO124)
<3>[ 5103.183856] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(not defined)
<3>[ 5103.183865] [WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[ 5103.183874] [WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO13)
<3>[ 5103.183883] [WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(14)
<3>[ 5103.183892] [WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO15)
<3>[ 5103.183901] [WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(18)
<3>[ 5103.183910] [WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<3>[ 5103.183919] [WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[ 5103.183927] [WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[ 5103.183936] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[ 5103.183945] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[ 5103.183954] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[ 5103.183963] [WMT-PLAT][I]wmt_plat_dump_pin_conf:FM digital mode is not set, no need for I2S GPIOs
<3>[ 5103.183973] [WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(GPIO72)
<3>[ 5103.183982] [WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(GPIO122)
<3>[ 5103.183992] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[ 5103.184003] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<3>[ 5103.184015] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[ 5103.184031] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<7>[ 5103.190523] [9589:er.ServerThread] set proc[9589] name: -> [Thread-610]
<7>[ 5103.195886] [5906:WifiWatchdogThr] exit
<7>[ 5103.202940] [9589:Thread-610] exit
<3>[ 5103.387134] [WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[ 5103.387152] [WMT-PLAT][I]wmt_plat_i2s_ctrl:[MT662x]warnning:FM digital mode is not set, no I2S GPIO settings should be modified by combo driver
<3>[ 5103.387166] [WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<4>[ 5103.387355] [STP-PSM] [E]_stp_psm_notify_stp(1174):ERROR! Invalid Action!!
<4>[ 5103.387361]
<3>[ 5103.387380] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[ 5103.387393] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<4>[ 5103.387522] mt6575_get_bus_freq() return 192400
<3>[ 5103.388573] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[ 5103.388585] Flush type = 4 Rx Queue
<3>[ 5103.388717] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[ 5103.388732] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[ 5103.388743] [STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[ 5103.388752] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[ 5103.388761] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<6>[ 5103.388774] [STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[ 5103.388784] [STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[ 5103.388795] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[ 5103.388807] [STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[ 5103.394408] [WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6628)
<3>[ 5103.400013] [WMT-IC][I]mt6628_ver_check:MT6628: read hw_ver (hw version) (0x8b10)
<3>[ 5103.405621] [WMT-IC][I]mt6628_ver_check:MT6628: read fw_ver (rom version) (0x8b10)
<3>[ 5103.405635] [WMT-IC][I]mt6628_find_wmt_ic_info:found ic info(0x8b10) by full match! index:2
<3>[ 5103.405650] [WMT-IC][I]mt6628_ver_check:MT6628: wmt ic info: MT6628.E3 (0x8b10, WMTHWVER:2, patch_ext:_e2)
<3>[ 5103.405664] [WMT-CORE][I]wmt_core_hw_check:chip id(0x6628) ver_check ok
<3>[ 5103.416523] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[ 5103.416536] [WMT-IC][I]mt6628_sw_init:WMT-CORE: change baudrate(4000000) ok
<3>[ 5103.422345] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(srh_patch) result(0)
<3>[ 5103.422361] [WMT-IC][I]mt6628_patch_dwn:valid patch found: (/system/etc/firmware//mt6628_patch_e2_hdr.bin)
<3>[ 5103.423426] [WMT-IC][I]mt6628_patch_dwn:===========================================
<3>[ 5103.423440] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Built Time = 20130304175729a
<3>[ 5103.423451] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[ 5103.423461] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[ 5103.423471] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Ph Ver = 0x0010
<3>[ 5103.423480] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Platform = 1150
<3>[ 5103.423490] [WMT-IC][I]mt6628_patch_dwn:===========================================
<3>[ 5103.586666] [WMT-IC][I]mt6628_patch_dwn:wmt_core: patch dwn:0 frag(25, 168) ok
<3>[ 5103.587414] [WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf07fc0c)
<3>[ 5103.588419] [WMT-IC][I]mt6628_sw_init:init_coex ok
<6>[ 5103.589164] [STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[ 5103.589178] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[ 5103.589190] [STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[ 5103.589200] [WMT-IC][I]mt6628_sw_init:enable host STP-UART-FULL mode
<3>[ 5103.610054] [WMT-IC][I]mt6628_sw_init:set fm mode (2) ok
<3>[ 5103.610066] [WMT-IC][I]mt6628_sw_init:disable mt662x firmware coredump
<6>[ 5103.610078] [STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[ 5103.610091] [STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[ 5103.610102] mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[ 5103.610110] board_sdio_ctrl force off before on
<6>[ 5103.610117] mtk_wcn_cmb_sdio_off (3)
<6>[ 5103.610154] mtk_wcn_cmb_sdio_on (3)
<3>[ 5103.610187] msdc3 -> USR Resume <- msdc_pm() : L<1233> PID
<3>[ 5103.610877] msdc3 -> sdio ops_get_cd<1> <- msdc_ops_get_cd() : L<3030> PID
<3>[ 5103.647341] msdc3 -> ================ <- msdc_set_mclk() : L<694> PID
<3>[ 5103.647358] msdc3 -> !!! Set<260KHz> Source<197000KHz> -> sclk<259KHz> DDR<0> mode<0> div<190> <- msdc_set_mclk() : L<696> PID
<3>[ 5103.647372] msdc3 -> ================ <- msdc_set_mclk() : L<697> PID
<3>[ 5103.667670] msdc3 -> XXX CMD<52> MSDC_INT_CMDTMO Arg<0x00000c00> <- msdc_irq() : L<3215>
<3>[ 5103.668255] msdc3 -> XXX CMD<52> MSDC_INT_CMDTMO Arg<0x80000c08> <- msdc_irq() : L<3215>
<3>[ 5103.672572] msdc3 -> XXX CMD<8> MSDC_INT_CMDTMO Arg<0x000001aa> <- msdc_irq() : L<3215>
<3>[ 5103.676953] msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1293> PID
<3>[ 5103.697305] msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<2975> PID
<3>[ 5103.697339] msdc3 -> ================ <- msdc_set_mclk() : L<694> PID
<3>[ 5103.697354] msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<696> PID
<3>[ 5103.697368] msdc3 -> ================ <- msdc_set_mclk() : L<697> PID
<6>[ 5103.698070] mmc1: new high speed SDIO card at address 0001
<6>[ 5103.699297] [WMT-DFT][I]hif_sdio_probe:start!
<6>[ 5103.699311] [WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x6628) num(0x1)
<6>[ 5103.699320] [WMT-DFT][I]hif_sdio_probe:card->info[0]: 6628
<6>[ 5103.699329] [WMT-DFT][I]hif_sdio_probe:card->info[1]: Combo
<6>[ 5103.699337] [WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[ 5103.699344] [WMT-DFT][I]hif_sdio_probe:card->info[3]:
<6>[ 5103.699430] [WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(520192)
<7>[ 5103.751628] [8827:Smack Packet Wr] exit
<6>[ 5103.767111] [WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[ 5103.767221] [2:kthreadd] fork [9590:kthreadd]
<6>[ 5103.777147] [WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<5>[ 5103.777176] [wlan] net_device prDev(0xc73dc000) allocated
<5>[ 5103.778795] [wlan] Open FW image: WIFI_RAM_CODE done
<5>[ 5103.794513] [wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[ 5103.794589] [wlan] Virtual Address = cf22c000 for COMMON MGMT MEMORY POOL.
<5>[ 5103.794602] [wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[ 5103.794630] [wlan] Virtual Address = cf249000 for SW_RFB_T.
<5>[ 5103.794641] [wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[ 5103.794665] [wlan] Virtual Address = cf24e000 for MSDU_INFO_T.
<6>[ 5103.794677] [wlan] wlanAdapterStart(): Acquiring LP-OWN
<6>[ 5103.817304] [wlan] Chip ID: 0x6628
<6>[ 5103.817316] [wlan] Revision ID: 0x0
<6>[ 5104.563876] [wlan] wlanAdapterStart(): Waiting for Ready bit..
<6>[ 5104.577128] [wlan] Ready bit asserted
<5>[ 5104.613733] [wlan] [wifi] wlan%d netif_carrier_off
<6>[ 5104.613749] [wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[ 5104.613817] [wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[ 5104.613885] [wlan] Domain: map=0, idx=0, code=0x4555
<7>[ 5104.614204] [2:kthreadd] fork [9591:kthreadd]
<5>[ 5104.615620] [wlan] tx_thread starts running...
<6>[ 5104.677538] [WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(6628) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[ 5104.677553] [WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[ 5104.677571] [WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 coredump:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[ 5104.678168] [STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<3>[ 5104.678202] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<4>[ 5104.679124] [STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<7>[ 5104.759803] [SYSRAM][EanbleSwitchBank]MFG to SYSRAM, SWITCH_BANK = 0x00000000, u4AllocatedTbl = 0x00000000
<6>[ 5104.778719] [RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[ 5104.778740] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[ 5104.780040] [SYSRAM][EanbleSwitchBank]SYSRAM to MFG, SWITCH_BANK = 0x00000007, u4AllocatedTbl = 0x00000000
<7>[ 5104.797630] [1:init] fork [9592:init]
<7>[ 5104.799091] [425:WifiService] fork [9593:WifiService]
<7>[ 5104.801779] [9593:WifiService] set proc[9593] name: -> [WifiMonitor]
<7>[ 5104.811205] [9592:init] set proc[9592] name: -> [logwrapper]
<7>[ 5104.813581] [9592:logwrapper] fork [9594:logwrapper]
<7>[ 5104.820697] [9594:logwrapper] set proc[9594] name: -> [wpa_supplicant]
<7>[ 5104.829810] [380:er.ServerThread] fork [9595:er.ServerThread]
<7>[ 5104.836735] [425:WifiService] fork [9596:WifiService]
<7>[ 5104.847798] [9595:er.ServerThread] set proc[9595] name: -> [Thread-612]
<7>[ 5104.848864] [9595:Thread-612] exit
<7>[ 5104.848926] [9596:WifiService] set proc[9596] name: -> [WifiWatchdogThr]
<5>[ 5105.052958] [Power/Battery] [use_chip_trim_value] 1614 -> 1622
<5>[ 5105.063436] [Power/Battery] [use_chip_trim_value] 1627 -> 1635
<5>[ 5105.064285] [Power/Battery] [use_chip_trim_value] 76 -> 76
<5>[ 5105.069883] [Power/Battery] [FGADC] 1,1635,0,76,3796,43,32,19,1354,1361,-36,0,0,1000,0,3839,1000,73,68,1627,100,103
<7>[ 5105.162171] [SYSRAM][EanbleSwitchBank]MFG to SYSRAM, SWITCH_BANK = 0x00000000, u4AllocatedTbl = 0x00000000
<7>[ 5105.168242] [SYSRAM][EanbleSwitchBank]SYSRAM to MFG, SWITCH_BANK = 0x00000007, u4AllocatedTbl = 0x00000000
<7>[ 5105.280227] [SYSRAM][EanbleSwitchBank]MFG to SYSRAM, SWITCH_BANK = 0x00000000, u4AllocatedTbl = 0x00000000
<7>[ 5105.285983] [SYSRAM][EanbleSwitchBank]SYSRAM to MFG, SWITCH_BANK = 0x00000007, u4AllocatedTbl = 0x00000000
<7>[ 5105.407235] [9571:AsyncTask #1] fork [9597:AsyncTask #1]
<7>[ 5105.449768] [9597:AsyncTask #1] set proc[9597] name: -> [dmesg]
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GRK39F
ro.build.display.id=ALPS.GB2.MP.V2.24
ro.build.version.incremental=vCB7-0
ro.custom.build.version=vCB7-0
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.6
ro.build.date=Thu Aug 29 08:44:43 CST 2013
ro.build.date.utc=1377737083
ro.build.type=user
ro.build.user=huilian.liu
ro.build.host=aclgcl-ubnt22
ro.build.tags=release-keys
ro.product.model=ALCATEL ONE TOUCH 4010A
ro.product.display.model=ALCATEL ONE TOUCH 4010A
ro.product.brand=TCT
ro.product.name=Beetle_Lite
ro.product.device=Beetle_Lite_GSM
ro.product.board=Beetle_Lite
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=TCT
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=Beetle_Lite_GSM
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=Beetle_Lite-user 2.3.6 GRK39F vCB7-0 release-keys
ro.build.fingerprint=TCT/Beetle_Lite/Beetle_Lite_GSM:2.3.6/GRK39F/vCB7-0:user/release-keys
ro.build.flavor=
# end build properties
#
#jrd sys properties
#
ro.config.ringtone=Buoy_default.ogg
ro.config.notification_sound=Drop_default.ogg
Def.22.AsDialCode.Enable=false
def.additional.data.roaming=false
ro.com.Guatemala.SP.call=false
ecc.list.for.peso=112,911
ro.config.message_ringtone=claro.ogg
ro.config.alarm_alert=Ocean_default.ogg
ro.product.dataroaming.popup=false
ro.config.sync=yes
ro.com.google.clientidbase=android-alcatel
ro.com.google.clientidbase.ms=android-americamovil-co
ro.com.google.clientidbase.gmm=android-alcatel
ro.com.google.clientidbase.am=android-americamovil-co
ro.com.google.clientidbase.yt=android-alcatel
ro.setupwizard.mode=OPTIONAL
ro.allow.mock.location=1
ro.config.phnum_significant_len=10
ro.def.screen.brightness=48
persist.sys.timezone=America/Bogota
ro.com.android.dataroaming=false
ro.com.android.dataroaming2=false
ro.product.locale.language=es
ro.product.locale.region=MX
ro.def.touch_tone_general=1
ro.def.touch_tone_meeting=0
ro.def.touch_tone_outdoor=1
ro.mmsbeep.in.calling=1
persist.service.adb.enable=0
ro.def.screen.brightness.mode=manual
ro.kernel.diag.enable=true
persist.adb.notify=0
telcel.clearcodes.for.perso=false
comcel.clearcodes.for.perso=true
keyguard.no_require_sim=true
ro.force.install.custom.app=false
ro.update.cfi.for.all=false
persist.sys.country=
persist.sys.language=
ro.def.software.version=010 01
ro.def.software.svn=010 01
ro.power.key.default.behavior=1
ro.handfree.power.meter.enable=true
def.rtsp.port.limit=8000,60000
gsm.version.baseband=6575M
ro.config.power_on_general=Feeling_on.ogg
ro.config.power_off_general=Feeling_off.ogg
ro.config.key_switch_on_off=1
ro.config.key_off_animation=1
ro.mobile_data_enable=1
Def.shuttersound.enable=true
def.sdn.list.menu.hide=false
ro.camera.interpolation.enable=0
A51.supported.for.perso=true
A52.supported.for.perso=false
A53.supported.for.perso=true
Modem.FD.supported.for.perso=true
ABM.reliability.class.perso=true
TCM.reliability.class.perso=true
AMRWB.GSM.supported.for.perso=false
AMRWB.UMTS.supported.for.perso=true
ro.com.google.mcc_fallback=
busy.tone.length.millis=3200
def.sendemptysms.enable=false
def.display.build.id=GINGERBREAD
def.default.song.encode=false
ro.def.SIPcall.enable=false
ro.bluetooth.default.name=ALCATEL ONE TOUCH T'Pop
Def.PhoneVibrator.enable=false
def.settings.locale.summary=true
ro.com.movilnet.SP.label=false
ro.com.movilnet.SP.call=false
ro.dnsmasq.least.time=120m
ro.product.mms.sdcard.custom=true
ro.config.message.light=0
ro.default.emergency.number=112
Modem.Manufacture.for.perso=ALCATEL
Modem.Model.for.perso=ONE TOUCH 4010X
ro.enable.google.search.engine=true
gsm.stk.perso.app_title=Vive tu Sim
ro.enable.preload.contacts=false
ro.use.mtk.dialpad=false
ro.use.tray.display=false
persist.sys.extra_volume=1
ro.preset.speed.dial.editable=true
ro.show.input.method.suggestion=false
ro.lowram.notification=false
drm.show.consume_enable=false
def.display.spanish.setting=false
def.popup.temperature.dialog=false
ro.temperature.mode=false
def.display.name.for.csl=false
ro.incrfmhsgain=0
ro.config.voice.volume=4
ro.headset.voice.volume=2
ro.speaker.voice.volume=5
ro.fmspkgain=0
def.PNFormatHyphen.needed=true
def.daul.sml.for.telefonica=false
def.display.Model.Number=1
# begin mediatek build properties
ro.mediatek.version.release=ALPS.GB2.MP.V2.24
ro.mediatek.platform=MT6575
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.GB2.MP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
#
# ADDITIONAL_BUILD_PROPERTIES
#
fmradio.driver.chip=3
ro.sf.hwrotation=0
ril.current.share_modem=1
launcherplus.allappsgrid=2d
curlockscreen=3
ro.mediatek.gemini_support=false
ro.mediatek.drm_support=true
persist.radio.fd.counter=20
persist.radio.fd.off.counter=20
mediatek.wlan.chip=MT6628
mediatek.wlan.module.postfix=_mt6628
ro.config.notification_sound=Resonance.ogg
ro.config.alarm_alert=Tinkle.ogg
ro.config.ringtone=Blink.ogg
ro.config.message_ringtone=Morning.ogg
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
lca_core 2718 0 - Live 0xbf000000 (P)
pvrsrvkm 163658 35 mtklfb, Live 0xbf006000
mtklfb 14525 0 - Live 0xbf03c000
mtk_drvb 4403 0 - Live 0xbf046000 (P)
mtk_hif_sdio 17706 2 wlan_mt6628,mtk_stp_wmt, Live 0xbf04d000
mtk_stp_wmt 364110 7 wlan_mt6628,mtk_fm_priv,mtk_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf058000 (P)
mtk_stp_uart 21521 1 - Live 0xbf0c1000 (P)
mtk_stp_gps 37166 0 - Live 0xbf0cc000
mtk_stp_bt 39754 0 - Live 0xbf0db000
mtk_fm_drv 98138 1 mtk_fm_priv, Live 0xbf0ea000
mtk_fm_priv 2427 0 - Live 0xbf10b000 (P)
wlan_mt6628 280002 0 - Live 0xbf111000 (P)
ccci_plat 101892 3 sec,ccmni,ccci, Live 0xbf16e000 (P)
ccci 138050 15 ccmni, Live 0xbf190000 (P)
ccmni 16670 0 - Live 0xbf1bf000 (P)
mt6575_m4u 84190 6 - Live 0xbf1ca000 (P)
devinfo 756 0 - Live 0xbf1e7000 (P)
mt6575_vcodec_kernel_driver 23905 2 - Live 0xbf1ed000 (P)
sec 84741 0 - Live 0xbf1fa000 (P)
aed 17997 3 - Live 0xbf216000 (P)
RAM: 256 MB (232 MB available)
System RAM: 232.000MB
mtkfb.0: 2.000MB
Flash: 16 GB Build-in (14.641 GB actual); 0.5 GB (0.479 GB actual)
mmcblk0: 14.641 GB
mtdblock: 0.024 GB
mtdblock1: 0.455 GB
Touch Screen for TCT ALCATEL ONE TOUCH 4010x
$28.86 Carbide Tip TCT Drill Bit Hole Saw 12-200mm Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling Cutting Kit
$195.74 5PCS Good Quality Carbide TCT Dowel Drill Bits CNC Router Tools For Woodworking Machinery Total Length 70mm
$2.1 Two Flutes Woodworking Gang Drill Bits Blind Hole TCT Drilling Head Length 70mm 57mm for Multi Rows Boring Machine 10mm Shank
$2.28 TCT/HSS Annular Cutter Pilot Pin 6.35mm 8mm Shank 77/90/102/127/160mm Long Pilot Pin Steel Plate Drill Accessories
$25.23 CMCP TCT/HSS Annular Cutter Pilot Pin 6.35mm 8mm Shank 77/90/102/127/160mm Long Pilot Pin Steel Plate Drill Accessories
$3.52 Pilot Pin 6.34*90MM 6.34*102MM 7.98*90MM TCT Annular Cutter HSS Annular Cutter Positioning Rod Ejector Pin
$48.68 12-200mm TCT Hole Saw Drill Bits Alloy Carbide Cobalt Steel Hole Opener Metal Cutting For Stainless Steel Alloy Metal Drilling
$189.18 12Pcs15-50mm Alloy Hole Saw Set Carbide Tip TCT Metal Cutter Core Drill Bit Kits for Stainless Steel Metal Drilling Crown
$3.63 1pc 12-160mm TCT Carbide Hole Saw Drill Bit Hole Saw Cutter For Stainless Steel Metal Alloy Wood Drilling
$3.32 1pc 12-160mm TCT Carbide Hole Saw Drill Bit Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$3.63 1 pc 5A Carbide Tip TCT Drill Bit Hole Saw 12-150mm Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$227.95 6pcs 16-32mm Drilling Crown For Stainless Steel TCT Hole Saw Set Tungsten Carbide Tipped Drill Bits For Metal Alloy iron
$32.28 TCT Hole Saw 12-127mm Hard Alloy Extended Hole Saw Stainless Steel Metal Iron Wood Metal Cutting Kit Tungsten Steel Cutting Tool
$36.66 TCT Hole Saw Carbide Tipped Hole Cutter With Titanium-Plated Pilot Drill Bit For Metal Stainless Steel Iron And Wood Hole Saw
$210.35 6pcs 16-32mm Drilling Crown For Stainless Steel TCT Hole Saw Set Tungsten Carbide Tipped Drill Bits For Metal Alloy iron
$36.8 12-100mm TCT Hole Saw Tungsten Carbide Tipped Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$44.39 1PC TCT Hole Opener 12-55mm 6.35mm MAX handle Alloy Hole Saw Stainless Steel Metal Wall Cutting Kit Tungsten Steel Cutting Tool
$203.95 6PCS 16-35mm TCT Hole Saw Cutter Alloy Hole Saw Set Carbide Tip For Stainless Steel Iron Plate Metalworking Drilling Crown
$2.51 HUHAO 5A TCT Hole Saw Drill Bit Tungsten Carbide Tipped Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$5.98 12.7mm 3 Flutes TCT Trimming Straight Bit Milling Cutter For MDF Plywood Chipboard Hard Wood Drill Engraving Router Bit Endmill
Replacement Battery for TCT ALCATEL ONE TOUCH 4010x
$28.86 Carbide Tip TCT Drill Bit Hole Saw 12-200mm Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling Cutting Kit
$195.74 5PCS Good Quality Carbide TCT Dowel Drill Bits CNC Router Tools For Woodworking Machinery Total Length 70mm
$189.18 12Pcs15-50mm Alloy Hole Saw Set Carbide Tip TCT Metal Cutter Core Drill Bit Kits for Stainless Steel Metal Drilling Crown
$2.1 Two Flutes Woodworking Gang Drill Bits Blind Hole TCT Drilling Head Length 70mm 57mm for Multi Rows Boring Machine 10mm Shank
$3.63 1pc 12-160mm TCT Carbide Hole Saw Drill Bit Hole Saw Cutter For Stainless Steel Metal Alloy Wood Drilling
$3.52 Pilot Pin 6.34*90MM 6.34*102MM 7.98*90MM TCT Annular Cutter HSS Annular Cutter Positioning Rod Ejector Pin
$48.68 12-200mm TCT Hole Saw Drill Bits Alloy Carbide Cobalt Steel Hole Opener Metal Cutting For Stainless Steel Alloy Metal Drilling
$25.23 CMCP TCT/HSS Annular Cutter Pilot Pin 6.35mm 8mm Shank 77/90/102/127/160mm Long Pilot Pin Steel Plate Drill Accessories
$2.28 TCT/HSS Annular Cutter Pilot Pin 6.35mm 8mm Shank 77/90/102/127/160mm Long Pilot Pin Steel Plate Drill Accessories
$3.32 1pc 12-160mm TCT Carbide Hole Saw Drill Bit Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$3.63 1 pc 5A Carbide Tip TCT Drill Bit Hole Saw 12-150mm Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$36.66 TCT Hole Saw Carbide Tipped Hole Cutter With Titanium-Plated Pilot Drill Bit For Metal Stainless Steel Iron And Wood Hole Saw
$32.28 TCT Hole Saw 12-127mm Hard Alloy Extended Hole Saw Stainless Steel Metal Iron Wood Metal Cutting Kit Tungsten Steel Cutting Tool
$227.95 6pcs 16-32mm Drilling Crown For Stainless Steel TCT Hole Saw Set Tungsten Carbide Tipped Drill Bits For Metal Alloy iron
$210.35 6pcs 16-32mm Drilling Crown For Stainless Steel TCT Hole Saw Set Tungsten Carbide Tipped Drill Bits For Metal Alloy iron
$36.8 12-100mm TCT Hole Saw Tungsten Carbide Tipped Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$44.39 1PC TCT Hole Opener 12-55mm 6.35mm MAX handle Alloy Hole Saw Stainless Steel Metal Wall Cutting Kit Tungsten Steel Cutting Tool
$5.98 12.7mm 3 Flutes TCT Trimming Straight Bit Milling Cutter For MDF Plywood Chipboard Hard Wood Drill Engraving Router Bit Endmill
$2.51 HUHAO 5A TCT Hole Saw Drill Bit Tungsten Carbide Tipped Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$203.95 6PCS 16-35mm TCT Hole Saw Cutter Alloy Hole Saw Set Carbide Tip For Stainless Steel Iron Plate Metalworking Drilling Crown
Cover Cases for TCT ALCATEL ONE TOUCH 4010x
$189.18 12Pcs15-50mm Alloy Hole Saw Set Carbide Tip TCT Metal Cutter Core Drill Bit Kits for Stainless Steel Metal Drilling Crown
$48.68 12-200mm TCT Hole Saw Drill Bits Alloy Carbide Cobalt Steel Hole Opener Metal Cutting For Stainless Steel Alloy Metal Drilling
$2.28 TCT/HSS Annular Cutter Pilot Pin 6.35mm 8mm Shank 77/90/102/127/160mm Long Pilot Pin Steel Plate Drill Accessories
$3.63 1pc 12-160mm TCT Carbide Hole Saw Drill Bit Hole Saw Cutter For Stainless Steel Metal Alloy Wood Drilling
$25.23 CMCP TCT/HSS Annular Cutter Pilot Pin 6.35mm 8mm Shank 77/90/102/127/160mm Long Pilot Pin Steel Plate Drill Accessories
$2.1 Two Flutes Woodworking Gang Drill Bits Blind Hole TCT Drilling Head Length 70mm 57mm for Multi Rows Boring Machine 10mm Shank
$195.74 5PCS Good Quality Carbide TCT Dowel Drill Bits CNC Router Tools For Woodworking Machinery Total Length 70mm
$3.52 Pilot Pin 6.34*90MM 6.34*102MM 7.98*90MM TCT Annular Cutter HSS Annular Cutter Positioning Rod Ejector Pin
$28.86 Carbide Tip TCT Drill Bit Hole Saw 12-200mm Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling Cutting Kit
$3.32 1pc 12-160mm TCT Carbide Hole Saw Drill Bit Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$3.63 1 pc 5A Carbide Tip TCT Drill Bit Hole Saw 12-150mm Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$32.28 TCT Hole Saw 12-127mm Hard Alloy Extended Hole Saw Stainless Steel Metal Iron Wood Metal Cutting Kit Tungsten Steel Cutting Tool
$36.66 TCT Hole Saw Carbide Tipped Hole Cutter With Titanium-Plated Pilot Drill Bit For Metal Stainless Steel Iron And Wood Hole Saw
$227.95 6pcs 16-32mm Drilling Crown For Stainless Steel TCT Hole Saw Set Tungsten Carbide Tipped Drill Bits For Metal Alloy iron
$210.35 6pcs 16-32mm Drilling Crown For Stainless Steel TCT Hole Saw Set Tungsten Carbide Tipped Drill Bits For Metal Alloy iron
$36.8 12-100mm TCT Hole Saw Tungsten Carbide Tipped Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$44.39 1PC TCT Hole Opener 12-55mm 6.35mm MAX handle Alloy Hole Saw Stainless Steel Metal Wall Cutting Kit Tungsten Steel Cutting Tool
$5.98 12.7mm 3 Flutes TCT Trimming Straight Bit Milling Cutter For MDF Plywood Chipboard Hard Wood Drill Engraving Router Bit Endmill
$2.51 HUHAO 5A TCT Hole Saw Drill Bit Tungsten Carbide Tipped Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$203.95 6PCS 16-35mm TCT Hole Saw Cutter Alloy Hole Saw Set Carbide Tip For Stainless Steel Iron Plate Metalworking Drilling Crown
Find Similar devices | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |