1. Install SpecDevice
2. Run and decode your specs
3. Get your link (read more...)
| General Specifications | |
|---|---|
| Manufacturer | samsung |
| Model | I9500 |
| Firmware | 4.2.2; I9500ZSUAMDE; SDK10 |
| CPU | 2 cores; SAMSUNG GOLDEN exynos5 |
| Display | 800 x 480; DPI: 240; Evaluated Size: 3,9" |
| Touch screen | Multitouch 2 points |
| GPU | Mali-400 MP ; ARM ; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.7@810899 |
| RAM | 256 MB (242 MB available) |
| Flash | 16 GB (14.726 GB actual); 0.5 GB (0.472 GB actual) (see memory map tab) |
| Communications | |
| Phone | GSM, Dual SIM; Net: GPRS |
| WiFi | lca_core; IEEE 802.11 b/g/n; MediaTek MT6628; AP Mode |
| USB Host | Yes |
| Bluetooth | Bluetooth 3.0+HS, 4.0 |
| GPS | Yes |
| Advanced Features | |
| Front camera | Photo: 4.9 MP; Max: 2560x1920; Focus: infinity; Flash modes: on off torch |
| Back camera | Photo: 0.3 MP; Max size: 640x480; Focus: infinity; No flash |
| Sensors | AMI304 3-axis Magnetic Field sensor (Aichi Steel); range: 0...600; resolution: 0,002 (0%); power: 0,25mA; |
| ADXL345 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; | |
| CM3623 Proximity Sensor (Capella); range: 0...1; resolution: 1 (100%); power: 0,13mA; | |
| CM3623 Light Sensor (Capella); range: 0...10240; resolution: 1 (0,01%); power: 0,13mA; | |
| MPU3000 gyroscope Sensor (Invensensor); range: 0...34,91; resolution: 0,011 (0,031%); power: 6,1mA; | |
| Gravity Sensor (Google Inc.); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; | |
| Linear Acceleration Sensor (Google Inc.); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; | |
| Rotation Vector Sensor (Google Inc.); range: 0...1; resolution: 0 (0%); power: 0,38mA; | |
| Vibrator | Yes |
| Supported languages | 42; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Burmese; Norwegian; Dutch; Polish; Portuguese; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
| Battery | Technology: Li-ion; Voltage: 3933 |
| FM radio | Supported by chipset |
| Owner's comment: | s4 mini |
| SD Version: | 1.1 5 |
KERNEL: Linux version 3.0.13-380934 (se.infra@ EP-110) (gcc version 4.4.3 (GCC) ) #2 SMP PREEMPT Wed Oct 24 23:40:54 KST 2012
CODENAME: REL
Mainboard: universal5410
BRAND: samsung
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: ja3g
DISPLAY: JDQ39.I9500ZSUAMDE
FINGERPRINT: samsung/ja3gzs/ja3g:4.2.2/JDQ39/I9500ZSUAMDE:user/release-keys
HARDWARE: mt6575
ID: JDQ39
TAGS: release-keys
Processor : ARMv7 Processor rev 1 (v7l)
processor : 0
BogoMIPS : 2000
processor : 1
BogoMIPS : 2000
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc09
CPU revision : 1
Hardware : SAMSUNG GOLDEN
Revision : 006a
Serial : 0000000000000000
��p�ʜ���$0�M�p��p��p����l��l ��l0�� ��h�����
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_stream2
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<7>[69778.211327] [14442:amsungapps.una2] fork [14451:amsungapps.una2]
<7>[69778.211534] [14451:amsungapps.una2] exit
<7>[69778.232195] [12820:Smack Packet Ha] exit
<5>[69778.245030] [Power/Alarm] alarm 2 set 81127.764000000
<7>[69778.248529] [12787:GTalkConnWorker] fork [14452:GTalkConnWorker]
<7>[69778.248588] [14452:GTalkConnWorker] set proc[14452] name: -> [close-XMPP-conn]
<5>[69778.296188] [wlan] unregisterdev(0xc3320000)
<6>[69778.296253] [WMT-DFT][I]hif_sdio_wifi_off:ok!
<7>[69778.296282] [7242:ksdioirqd/mmc1] exit
<6>[69778.296372] [WMT-DFT][I]hif_sdio_wifi_off:sdio_release_irq() for wifi ok
<4>[69778.296388] mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[69778.296397] mtk_wcn_cmb_sdio_off (3)
<3>[69778.296407] msdc3 -> USR Suspend <- msdc_pm() : L<1209> PID
<6>[69778.296452] [WMT-DFT][I]hif_sdio_remove:start!
<6>[69778.296502] [WMT-DFT][I]hif_sdio_remove:sdio func(0xc39bf9e0) is removed successfully!
<6>[69778.296582] mmc1: card 0001 removed
<3>[69778.316209] msdc3 -> save latch data<1> cmd<1> <- msdc_ops_set_ios() : L<2984> PID
<3>[69778.316225] msdc3 -> set mclk to 0 <- msdc_set_mclk() : L<647> PID
<3>[69778.316342] [WMT-CORE][I]opfunc_func_off:WMT-CORE:Fun(3) [POWER_OFF] and power down chip
<4>[69778.316363] [STP-PSM] [I]_stp_psm_is_redundant_active_op: redundant opId found, opId(1), preOpid(1)
<6>[69778.316384] [STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[69778.316396] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[69778.316408] [STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[69778.316416] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(1)
<4>[69778.316429] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[69778.316439] Flush type = 4 Rx Queue
<3>[69778.347329] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(close_stp) result(0)
<3>[69778.347346] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, hw_pwr_off start
<3>[69778.347359] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, BGF_EINT IRQ unregistered and disabled
<3>[69778.347373] [WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:ALL EINT not defined
<3>[69778.347383] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, ALL_EINT IRQ unregistered and disabled
<3>[69778.347394] [WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[69778.347406] [WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[69778.347419] [WMT-PLAT][I]wmt_plat_i2s_ctrl:[MT662x]warnning:FM digital mode is not set, no I2S GPIO settings should be modified by combo driver
<3>[69778.347433] [WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<3>[69778.347444] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[69778.347454] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, hw_pwr_off finish
<3>[69778.347464] [WMT-CORE][W]opfunc_pwr_off:HW_PWR_OFF ok
<3>[69778.347478] [WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC OFF]status(b:0 f:0 g:0 w:0 lpbk:0 coredump:0 wmt:0 sd1:0 sd2:0 stp:0)
<6>[69778.347511] [STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[69778.347529] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(4) type(3) ok
<7>[69778.429668] [224:er.ServerThread] fork [14453:er.ServerThread]
<7>[69778.451982] [14453:er.ServerThread] set proc[14453] name: -> [Thread-2615]
<7>[69778.465162] [5:khelper] fork [14454:khelper]
<7>[69778.465218] [14453:Thread-2615] exit
<7>[69778.467177] [7248:WifiWatchdogThr] exit
<7>[69778.486228] [14454:khelper] fork [14455:khelper]
<7>[69778.486281] [14455:khelper] exit
<7>[69778.486303] [14455:khelper] sig 17 to [14454:khelper]
<7>[69778.486337] [14454:khelper] exit
<7>[69778.486469] [5:khelper] fork [14456:khelper]
<7>[69778.495387] [14456:khelper] fork [14457:khelper]
<7>[69778.497396] [14457:khelper] exit
<7>[69778.497428] [14457:khelper] sig 17 to [14456:khelper]
<7>[69778.497483] [14456:khelper] exit
<7>[69778.497664] [5:khelper] fork [14458:khelper]
<7>[69778.497716] [14458:khelper] fork [14459:khelper]
<7>[69778.497759] [14459:khelper] exit
<7>[69778.497778] [14459:khelper] sig 17 to [14458:khelper]
<7>[69778.497960] [5:khelper] fork [14460:khelper]
<7>[69778.497978] [14458:khelper] exit
<7>[69778.506872] [14460:khelper] fork [14461:khelper]
<7>[69778.515738] [14461:khelper] exit
<7>[69778.515767] [14461:khelper] sig 17 to [14460:khelper]
<7>[69778.515813] [14460:khelper] exit
<7>[69778.516059] [7245:wpa_supplicant] exit
<7>[69778.516505] [7245:wpa_supplicant] sig 17 to [1:init]
<3>[69778.516674] init: untracked pid 7245 exited
<7>[69778.552435] [12614:e.process.gapps] fork [14462:e.process.gapps]
<7>[69778.554337] [14462:e.process.gapps] set proc[14462] name: -> [AsyncTask #3]
<7>[69778.581655] [106:zygote] fork [14463:zygote]
<7>[69778.586792] [14463:zygote] fork [14464:zygote]
<7>[69778.591299] [14464:zygote] set proc[14464] name: -> [HeapWorker]
<7>[69778.592065] [14463:zygote] fork [14465:zygote]
<7>[69778.600620] [14465:zygote] set proc[14465] name: -> [GC]
<7>[69778.611621] [14463:zygote] fork [14466:zygote]
<7>[69778.616392] [14440:dmesg] exit
<7>[69778.616557] [14440:dmesg] sig 17 to [14417:AsyncTask #1]
<7>[69778.616763] [14466:zygote] set proc[14466] name: -> [Signal Catcher]
<7>[69778.617259] [14463:zygote] fork [14467:zygote]
<7>[69778.618935] [14467:zygote] set proc[14467] name: -> [JDWP]
<7>[69778.619367] [14463:zygote] fork [14468:zygote]
<7>[69778.621535] [14468:zygote] set proc[14468] name: -> [Compiler]
<7>[69778.627107] [14463:zygote] fork [14469:zygote]
<7>[69778.629823] [14463:zygote] set proc[14463] name: -> [re-initialized>]
<7>[69778.634952] [14469:zygote] set proc[14469] name: -> [BinderThd_AP144]
<7>[69778.635398] [14469:BinderThd_AP144] fork [14470:BinderThd_AP144]
<7>[69778.639855] [14463:re-initialized>] set proc[14463] name: -> [ontakte.android]
<7>[69778.641020] [14470:BinderThd_AP144] set proc[14470] name: -> [BinderThd_AP144]
<7>[69778.732775] [12819:Smack Packet Re] sig 13 to [12819:Smack Packet Re]
<7>[69778.754966] [SYSRAM][EanbleSwitchBank]MFG to SYSRAM, SWITCH_BANK = 0x00000000, u4AllocatedTbl = 0x00000000
<7>[69778.760269] [SYSRAM][EanbleSwitchBank]SYSRAM to MFG, SWITCH_BANK = 0x00000007, u4AllocatedTbl = 0x00000000
<6>[69778.852912] [WLAN] rfkill_set_block(blocked 0)
<6>[69778.852923] [WLAN] Power on
<3>[69778.852937] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[69778.852954] [STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[69778.853205] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[69778.853220] [WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(not defined)
<3>[69778.853229] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO122)
<3>[69778.853238] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(not defined)
<3>[69778.853247] [WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[69778.853256] [WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO76)
<3>[69778.853265] [WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(1)
<3>[69778.853274] [WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO70)
<3>[69778.853283] [WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(0)
<3>[69778.853293] [WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<3>[69778.853302] [WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[69778.853311] [WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[69778.853320] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[69778.853329] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[69778.853337] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[69778.853347] [WMT-PLAT][I]wmt_plat_dump_pin_conf:FM digital mode is not set, no need for I2S GPIOs
<3>[69778.853358] [WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(GPIO72)
<3>[69778.853367] [WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(GPIO112)
<3>[69778.853376] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[69778.853388] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<3>[69778.853399] [WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:ALL EINT not defined
<3>[69778.853410] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[69778.853424] [WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[69778.853435] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<7>[69778.866470] [12819:Smack Packet Re] exit
<3>[69779.056202] [WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[69779.056220] [WMT-PLAT][I]wmt_plat_i2s_ctrl:[MT662x]warnning:FM digital mode is not set, no I2S GPIO settings should be modified by combo driver
<3>[69779.056234] [WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<4>[69779.056415] [STP-PSM] [E]_stp_psm_notify_stp(1174):ERROR! Invalid Action!!
<4>[69779.056421]
<3>[69779.056442] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[69779.056454] [WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[69779.056464] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<5>[69779.153522] [Power/Battery] [BATTERY:AVG] BatTemp:25 Vbat:3617 VBatSen:3618 SOC:15 ChrDet:1 Vchrin:3791 Icharging:286 ChrType:4 USBstate:1 gADC_I_SENSE_offset:0
<4>[69779.156337] mt6575_get_bus_freq() return 192400
<3>[69779.156492] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[69779.156502] Flush type = 4 Rx Queue
<3>[69779.156640] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[69779.156655] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[69779.156667] [STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[69779.156676] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[69779.156686] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<6>[69779.156700] [STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[69779.156711] [STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[69779.156722] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[69779.156733] [STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[69779.166188] [WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6628)
<3>[69779.172358] [WMT-IC][I]mt6628_ver_check:MT6628: read hw_ver (hw version) (0x8a10)
<3>[69779.177990] [WMT-IC][I]mt6628_ver_check:MT6628: read fw_ver (rom version) (0x8a10)
<3>[69779.178006] [WMT-IC][I]mt6628_find_wmt_ic_info:found ic info(0x8a10) by full match! index:1
<3>[69779.178020] [WMT-IC][I]mt6628_ver_check:MT6628: wmt ic info: MT6628.E2 (0x8a10, WMTHWVER:1, patch_ext:_e2)
<3>[69779.178034] [WMT-CORE][I]wmt_core_hw_check:chip id(0x6628) ver_check ok
<3>[69779.188901] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[69779.188915] [WMT-IC][I]mt6628_sw_init:WMT-CORE: change baudrate(4000000) ok
<3>[69779.195545] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(srh_patch) result(0)
<3>[69779.195563] [WMT-IC][I]mt6628_patch_dwn:valid patch found: (/system/etc/firmware//mt6628_patch_e2_hdr.bin)
<3>[69779.196869] [WMT-IC][I]mt6628_patch_dwn:===========================================
<3>[69779.196883] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Built Time = 20120918123704a
<3>[69779.196894] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[69779.196904] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[69779.196914] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Ph Ver = 0x0010
<3>[69779.196924] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Platform = 1150
<3>[69779.196933] [WMT-IC][I]mt6628_patch_dwn:===========================================
<7>[69779.198283] [12818:Smack Packet Wr] exit
<7>[69779.290316] [14452:close-XMPP-conn] exit
<3>[69779.346296] [WMT-IC][I]mt6628_patch_dwn:wmt_core: patch dwn:0 frag(21, 888) ok
<3>[69779.347028] [WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf0815a4)
<3>[69779.348028] [WMT-IC][I]mt6628_sw_init:init_coex ok
<6>[69779.349159] [STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[69779.349174] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[69779.349187] [STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[69779.349198] [WMT-IC][I]mt6628_sw_init:enable host STP-UART-FULL mode
<3>[69779.368018] [WMT-IC][I]mt6628_sw_init:co-clock disabled.
<3>[69779.369096] [WMT-IC][I]mt6628_sw_init:set fm mode (2) ok
<3>[69779.369107] [WMT-IC][I]mt6628_sw_init:disable mt662x firmware coredump
<6>[69779.369117] [STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[69779.369130] [STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[69779.369141] mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[69779.369148] board_sdio_ctrl force off before on
<6>[69779.369155] mtk_wcn_cmb_sdio_off (3)
<6>[69779.369193] mtk_wcn_cmb_sdio_on (3)
<3>[69779.369226] msdc3 -> USR Resume <- msdc_pm() : L<1234> PID
<3>[69779.369761] msdc3 -> sdio ops_get_cd<1> <- msdc_ops_get_cd() : L<3031> PID
<3>[69779.406451] msdc3 -> ================ <- msdc_set_mclk() : L<695> PID
<3>[69779.406470] msdc3 -> !!! Set<260KHz> Source<197000KHz> -> sclk<259KHz> DDR<0> mode<0> div<190> <- msdc_set_mclk() : L<697> PID
<3>[69779.406484] msdc3 -> ================ <- msdc_set_mclk() : L<698> PID
<3>[69779.426715] msdc3 -> XXX CMD<52> MSDC_INT_CMDTMO Arg<0x00000c00> <- msdc_irq() : L<3216>
<3>[69779.427303] msdc3 -> XXX CMD<52> MSDC_INT_CMDTMO Arg<0x80000c08> <- msdc_irq() : L<3216>
<3>[69779.431605] msdc3 -> XXX CMD<8> MSDC_INT_CMDTMO Arg<0x000001aa> <- msdc_irq() : L<3216>
<3>[69779.432951] msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1294> PID
<3>[69779.452954] msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<2976> PID
<3>[69779.452990] msdc3 -> ================ <- msdc_set_mclk() : L<695> PID
<3>[69779.453005] msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<697> PID
<3>[69779.453019] msdc3 -> ================ <- msdc_set_mclk() : L<698> PID
<6>[69779.453797] mmc1: new high speed SDIO card at address 0001
<6>[69779.454815] [WMT-DFT][I]hif_sdio_probe:start!
<6>[69779.454828] [WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x6628) num(0x1)
<6>[69779.454838] [WMT-DFT][I]hif_sdio_probe:card->info[0]: 6628
<6>[69779.454847] [WMT-DFT][I]hif_sdio_probe:card->info[1]: Combo
<6>[69779.454855] [WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[69779.454863] [WMT-DFT][I]hif_sdio_probe:card->info[3]:
<6>[69779.454945] [WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(520192)
<6>[69779.526171] [WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[69779.526286] [2:kthreadd] fork [14471:kthreadd]
<6>[69779.526316] [WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<5>[69779.526341] [wlan] net_device prDev(0xc7205000) allocated
<5>[69779.527624] [wlan] Open FW image: WIFI_RAM_CODE done
<5>[69779.537620] [wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[69779.537680] [wlan] Virtual Address = cfe37000 for COMMON MGMT MEMORY POOL.
<5>[69779.537694] [wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[69779.537717] [wlan] Virtual Address = cfe55000 for SW_RFB_T.
<5>[69779.537728] [wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[69779.537749] [wlan] Virtual Address = cfe5a000 for MSDU_INFO_T.
<6>[69779.537761] [wlan] wlanAdapterStart(): Acquiring LP-OWN
<6>[69779.556226] [wlan] Chip ID: 0x6628
<6>[69779.556237] [wlan] Revision ID: 0x0
<7>[69779.920446] [SYSRAM][EanbleSwitchBank]MFG to SYSRAM, SWITCH_BANK = 0x00000000, u4AllocatedTbl = 0x00000000
<7>[69780.120775] [SYSRAM][EanbleSwitchBank]SYSRAM to MFG, SWITCH_BANK = 0x00000007, u4AllocatedTbl = 0x00000000
<4>[69780.126294] select 14253 (d.process.media), adj 9, size 4279, to kill
<4>[69780.126312] select 14371 (.quicksearchbox), adj 11, size 3491, to kill
<4>[69780.126325] send sigkill to 14371 (.quicksearchbox), adj 11, size 3491
<7>[69780.126338] [38:lowmemorykiller] sig 9 to [14371:.quicksearchbox]
<7>[69780.126611] [14372:HeapWorker] exit
<7>[69780.126657] [14373:GC] exit
<7>[69780.126682] [14374:Signal Catcher] exit
<7>[69780.135711] [14371:.quicksearchbox] exit
<7>[69780.135746] [14377:BinderThd_AP143] exit
<7>[69780.135781] [14378:BinderThd_AP143] exit
<7>[69780.144708] [14375:JDWP] exit
<7>[69780.144745] [14376:Compiler] exit
<6>[69780.305720] [wlan] wlanAdapterStart(): Waiting for Ready bit..
<7>[69780.308710] [201:system_server] fork [14472:system_server]
<7>[69780.309117] [14376:Compiler] sig 17 to [106:zygote]
<7>[69780.309244] [14472:system_server] set proc[14472] name: -> [executeAppTrans]
<7>[69780.309650] [14472:executeAppTrans] exit
<6>[69780.416195] [wlan] Ready bit asserted
<5>[69780.445433] [wlan] [wifi] wlan%d netif_carrier_off
<6>[69780.445450] [wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[69780.445517] [wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[69780.445587] [wlan] Domain: map=0, idx=0, code=0x0000
<7>[69780.445883] [2:kthreadd] fork [14473:kthreadd]
<5>[69780.445922] [wlan] tx_thread starts running...
<6>[69780.456167] yaffs: userdata sync do_checkpoint 0,gc_urgen 1
<6>[69780.456178] yaffs: userdata yaffs_FlushSuperBlock 0
<6>[69780.530033] [WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(6628) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[69780.530048] [WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[69780.530066] [WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 coredump:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[69780.530682] [STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<3>[69780.530715] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<4>[69780.531263] [STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<6>[69780.531753] [RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[69780.531773] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[69780.534733] [1:init] fork [14474:init]
<7>[69780.535980] [250:WifiService] fork [14475:WifiService]
<7>[69780.537689] [14475:WifiService] set proc[14475] name: -> [WifiMonitor]
<7>[69780.545496] [14474:init] set proc[14474] name: -> [logwrapper]
<7>[69780.547320] [14474:logwrapper] fork [14476:logwrapper]
<7>[69780.553203] [14476:logwrapper] set proc[14476] name: -> [wpa_supplicant]
<7>[69780.558757] [250:WifiService] fork [14477:WifiService]
<7>[69780.559572] [224:er.ServerThread] fork [14478:er.ServerThread]
<7>[69780.586306] [14478:er.ServerThread] set proc[14478] name: -> [Thread-2619]
<7>[69780.587346] [14478:Thread-2619] exit
<7>[69780.587408] [14477:WifiService] set proc[14477] name: -> [WifiWatchdogThr]
<5>[69780.626808] [wlan] N=0 closed
<5>[69780.626828] [wlan] EVENT-ROAMING ABORT: Current Time = 69246180
<5>[69780.626840] [wlan] [13] TRANSITION: [0] -> [0]
<6>[69780.627089] [wlan] NAF=0,0,0
<6>[69780.627220] [wlan] NAF=0,0,0
<7>[69780.627376] [5:khelper] fork [14479:khelper]
<7>[69780.627422] [14479:khelper] fork [14480:khelper]
<7>[69780.627468] [14480:khelper] exit
<7>[69780.627490] [14480:khelper] sig 17 to [14479:khelper]
<7>[69780.627525] [14479:khelper] exit
<7>[69780.694291] [14417:AsyncTask #1] fork [14481:AsyncTask #1]
<7>[69780.698588] [14481:AsyncTask #1] set proc[14481] name: -> [dmesg]
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JDQ39
ro.build.display.id=JDQ39.I9500ZSUAMDE
ro.build.version.incremental=I9500ZSUAMDE
ro.custom.build.version=1369130221
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=4.2.2
ro.build.date=Tue May 21 18:00:04 CST 2013
ro.build.date.utc=1369130404
ro.build.type=user
ro.build.user=se.infra
ro.build.host=SEP-113
ro.build.tags=release-keys
ro.product.model=I9500
ro.product.brand=samsung
ro.product.name=ja3gzs
ro.product.device=ja3g
ro.product.board=universal5410
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=zh
ro.product.locale.region=CN
ro.wifi.channels=
ro.board.platform=exynos5
# ro.build.product is obsolete; use ro.product.device
ro.build.product=ja3g
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=ja3gzs-user 4.2.2 JDQ39 I9500ZSUAMDE release-keys
ro.build.fingerprint=samsung/ja3gzs/ja3g:4.2.2/JDQ39/I9500ZSUAMDE:user/release-keys
ro.build.flavor=
ro.build.user.sw.version=T803_JHT_M11_AD_V1_20130521
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=ALPS.GB2.MP.V2.30
ro.mediatek.platform=MT6575
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.GB2.MP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
#
# ADDITIONAL_BUILD_PROPERTIES
#
fmradio.driver.chip=3
ro.sf.hwrotation=180
ril.current.share_modem=2
launcher2.allappsgrid=3d_20
curlockscreen=2
ro.mediatek.gemini_support=true
ro.mediatek.drm_support=true
mediatek.wlan.chip=MT6628
mediatek.wlan.module.postfix=_mt6628
ro.config.notification_sound=S_Whistle.ogg
ro.config.alarm_alert=Walk_in_the_forest.ogg
ro.config.ringtone=Over_the_horizon.ogg
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
lca_core 2718 0 - Live 0xbf000000 (P)
pvrsrvkm 165086 39 mtklfb, Live 0xbf006000
mtklfb 14525 0 - Live 0xbf03d000
mtk_drvb 4403 0 - Live 0xbf047000 (P)
mtk_hif_sdio 17706 2 wlan_mt6628,mtk_stp_wmt, Live 0xbf04e000
mtk_stp_wmt 366765 7 wlan_mt6628,mtk_fm_priv,mtk_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf059000 (P)
mtk_stp_uart 21521 1 - Live 0xbf0c3000 (P)
mtk_stp_gps 37166 0 - Live 0xbf0ce000
mtk_stp_bt 39754 0 - Live 0xbf0dd000
mtk_fm_drv 98122 1 mtk_fm_priv, Live 0xbf0ec000
mtk_fm_priv 2427 0 - Live 0xbf10d000 (P)
wlan_mt6628 279954 0 - Live 0xbf113000 (P)
ccci_plat 101892 3 sec,ccmni,ccci, Live 0xbf170000 (P)
ccci 138050 15 ccmni, Live 0xbf192000 (P)
ccmni 16350 0 - Live 0xbf1c1000 (P)
mt6575_m4u 84190 4 - Live 0xbf1cb000 (P)
devinfo 756 0 - Live 0xbf1e8000 (P)
mt6575_vcodec_kernel_driver 23905 2 - Live 0xbf1ee000 (P)
sec 84741 0 - Live 0xbf1fb000 (P)
aed 17997 3 - Live 0xbf217000 (P)
RAM: 256 MB (242 MB available)
System RAM: 242.000MB
mtkfb.0: 4.000MB
Flash: 16 GB (14.726 GB actual); 0.5 GB (0.472 GB actual)
mmcblk0: 14.726 GB
mtdblock: 0.018 GB
mtdblock1: 0.472 GB
Touch Screen for samsung I9500
$1.91 S4 Touchscreen For Samsung Galaxy S IV S4 i9500 i9505 i9506 i9515 i337 GT-i9505 LCD Front Outer Glass Touch Screen Lens 5.0"
$14 5.0" Super AMOLED S4 LCD For Samsung S4 GT-i9505 i9500 i9505 i545 i337 LCD Display Touch Screen Digitizer Replacement
$1.99 For Samsung Galaxy S3 i9300 i9308 S4 GT-i9500 S5 G900F Front Touch screen Panel LCD Out Glass Cover Lens Replacement
$0.97 For Samsung Galaxy S3 i9300 i9305 i9300i i9301 i9301i S4 i9500 i9505 i337 S5 Front Panel Lens Outer Glass LCD Display + Adhesive
$14.15 Ymitn 100% Work Tested Motherboard 16GB Unlocked Official Mainboad With Chips Logic Board For Samsung Galaxy S4 i9500 i9505
$14.72 100% tested Super AMOLED For Samsung S4 I9505 LCD Display For Samsung S4 i9500 LCD Screen Touch Digitizer Assembly with frame
$21.57 NEW 5.0''S4 LCD For Samsung S4 LCD Display Touch Screen With Frame Assembly For S4 GT-GT-i905 i9500 i9506 LCD Repair
$9.02 SanErqi 10pcs Front Outer Glass Lens For Samsung Galaxy S4 i9505 I9500 front LCD Touch Screen
$11.8 10Pcs\lot For Samsung Galaxy S3 i9300 i9308 S4 GT-i9500 S5 G900F Front Touch screen Panel LCD Out Glass Cover Lens Replacement
$15.79 For SAMSUNG Galaxy S4 LCD Display With Frame GT-i9500 GT-i9505 i337 LCD Touch Screen Digitizer Assembly
$2.19 Aocarmo 2Pcs/Lot For Samsung Galaxy S4 i9500 i9505 LCD Touch Screen Double-Sided Adhesive Glue Tape Front Frame Sticker
$15.2 5.0"Inch For Samsung S4 i9500 i9505 i9506 i337 LCD Touch Screen Display Digitizer For Samsung S4 Display With Frame
$9.99 10PCS Display screen for Samsung Galaxy s4 I9500 I9505 i337 M919 lcd display digitizer Glass lens
$11.99 Women PU Leather Case for iPhone Samsung Xiaomi Huawei Nokia Phone Bag Touch Screen Small Shoulder Crossbody Pouch Wallet Bag
$18.95 S4 LCD Display For Samsung S4 i9500 LCD Screen Touch Digitizer Assembly Replacement Repair Parts
$15.89 5.0" Amoled For Samsung S4 i9500 i9505 i9506 i337 i545 LCD Touch Screen Display Digitizer with Frame Replacement
$16.1 100% Tested Super AMOLED Display For Samsung S4 I9505 LCD For Samsung S4 i9500 LCD Screen Touch Digitizer Assembly Repair Parts
$3.69 i9300 Digitizer For SAMSUNG S3 S4 S5 Mini Touch Panel Cover Outer Glass Lens For SAMSUNG S5 Front Screen Lens i9500 + Adhesive
$4.5 AAA Quality white/Blue Glass Lens pantalla for samsung galaxy s4 I9500 Glass Screen (not digitizer lcd display)
$16.6 Super AMOLED LCD screen for Samsung Galaxy S4 i9500, touch screen assembly Replacement Parts, 100% tested
Replacement Battery for samsung I9500
$0.26 2/5pcs HB9500-2P 3P 4P 5P 6P 7P 8P 9P 10Pin PCB Screw Terminal Block Connector HB-9500 300V 30A Lid Barrier Terminal 9.5MM Pitch
$0.55 1-10Pcs Charging Dock Port Connector Usb Charger Type C Plug For Blackview BV9500 Plus BV9600 Pro BV9800 BV5100 BV9900 BV9700
$0.64 5Pcs KF55C-10.0 HB611-6.35 HB762-7.62 HB825-8.25 HB9500-9.5 DIP Connector Socket 2P 3P 4P Plug BLACK Connector DIY New
$0.54 1-10Pcs Usb Charger Charging Dock Port Connector Type C Plug For Blackview BV9500 Plus BV9600 Pro BV9700 BV9800 BV5100 BV9900
$0.5 5Pcs HB-9500 2P-10P 9.5mm Barrier Terminal Block Connector with Cover PCB Mount Pitch 300 30A High HB9500
$4.22 5pcs/lot HB9500 Terminal Block 9.5mm Connector Covered Barrier Type 2p/3/4/5/6/7/8/9/10P
$0.44 2/5pcs HB9500-2p/3p/4p/5p/6p/7p/8p/9P PCB Screw Terminal block connector pitch 9.5MM 2PIN PIN HB9500
$0.49 2/5pcs HB9500-2P 3P 4P 5P 6P 7P 8P 9P 10Pin PCB Screw Terminal Block Connector HB-9500 300V 30A Lid Barrier Terminal 9.5MM Pitch
$0.35 HB9500-2P 3P 4P 5P 6P 7P 8P 9P 10Pin PCB Screw Terminal Block Connector HB-9500 300V 30A Lid Barrier Terminal 9.5MM Pitch
$0.4 Hb9500 Wiring Terminal Hb9500 Fence Wiring Terminal With Cover/Without Cover 9500-2p/3P/4P
$0.71 1pc Usb Charger Charging Dock Port Connector Plug For Blackview BV9500 BV9500 Plus BV9600 BV9600 Pro BV9700Pro BV9700 Type C
$0.18 2PCS Pcb Screw Terminal Block Connector Hb-9500 300v 30a Lid Barrier Terminal 9.5mm Pitch HB9500-2p 3p 4p 5p 6p 7p 8p 9p 10pin
$0.53 1-10Pcs Charging Dock Port Connector Usb Charger Type C Plug For Blackview BV9500 Plus BV9600 Pro BV9800 BV5100 BV9900 BV9700
$1.92 HB9500-2P 3P 4P 5P 6P 7P 8P 9P 10Pin PCB Screw Terminal Block Connector HB-9500 300V 30A Lid Barrier Terminal 9.5MM Pitch
$0.24 2/5pcs 9.5MM Pitch HB9500-2P 3P 4P 5P 6P 7P 8P 9P 10Pin PCB Screw Terminal Block Connector HB-9500 2Pin 300V30A Barrier terminal
$1.9 2PCS HB-9500 With lid Fence type connecting terminal 300V/30A 9.5MM connector 2P 3P 4P 5P 6P 7P 8P HB9500
$1.2 2PCS with lid HB9500-2P3P4P5P6P7P8P9P10P FENCE TYPE/TERMINAL BLOCK SPACING 9.5MM
$0.38 2/5pcs HB9500-2P 3P 4P 5P 6P 7P 8P 9P 10Pin PCB Screw Terminal Block Connector HB-9500 300V 30A Lid Barrier Terminal 9.5MM Pitch
$0.71 1Pcs Usb Charger Charging Dock Port Connector Type C Plug For Blackview BV9500 Plus BV9600 Pro BV9600Pro BV9700Pro BV9700 BV9800
$2.5 KF55C-10.0 HB611-6.35 HB762-7.62 HB825-8.25 HB9500-9.5 DIP Connector Socket 2P 3P 4P Plug BLACK Connector DIY New
Cover Cases for samsung I9500
$1.32 Case For Samsung S4 i9500 Case coque TPU Silicone Soft Cover on For Samsung Galaxy S4 bumper full 360 Protective fundas 6
$0.96 Silicone Case For Samsung S4 Case Samsung Galaxy S4 S 4 GT I9500 I9505 GT-I9500 GT-I9505 i9515 I9506 I9507 I9502 S4 Cases
$1.21 Retro Flip Case For Samsung Galaxy S3 S4 S5 S6 S7 Edge S8 S9 S10 S20 Plus Ultra Lite E PU Leather Wallet Phone Bag Stand Cover
$2.71 For Samsung Galaxy S3 S4 S5 I9300 I9305 I535 I9500 I9505 I337 G900 Mobile Phone Back Camera Glass Lens Cover
$1.32 Case For Samsung S4 i9500 Case coque TPU Silicone Soft Cover on For Samsung Galaxy S4 bumper full 360 Protective fundas 3
$1.29 For Samsung Galaxy S4 I9500 I9505 I337 I545 L720 R970 M919 Telephone Housing Back Camera Protective Glass Lens With Tool
$0.96 Wallet Flip Butterfly Leather Case For Samsung Galaxy S3 S4 S5 S6 S7 Edge S8 S9 S10 e S20 Plus Ultrs Note 8 9 10 Lite Book Cover
$1.32 Case For Samsung S4 i9500 Case coque TPU Silicone Soft Cover on For Samsung Galaxy S4 bumper full 360 Protective fundas 7
$5.8 Genuine Leather Case Cover For Samsung Galaxy S IV i9500 with 11 Colors + Free Screen Protector
$3.7 Phone Rear Battery Cover For Samsung Galaxy S4 I9505 I9500 I337 M919 I545 L720 Housing Door Back Cases Black White
$1.35 Case for Samsung Galaxy S4 I9500 I9505 Silicone Soft TPU Phone Cover for Samsung Galaxy S4 Mini i9190 i9192 i9195 Case Shell
$1.04 New For Samsung Galaxy S4 i9500 i9505 i337 Touch Panel Outer Cover Replacement For SAMSUNG S4 Front Glass Lens with Adhesive
$1.35 Silicone Case For Samsung Galaxy S4 i9500 Cases soft TPU Cover For Samsung S4 Phone shell full 360 Protective For S 4 cat
$0.99 Earpiece Speaker Anti Dust Mesh For Samsung Galaxy S3 i9300 S4 i9500 i9505 S5 i9600 Note 3 4 5 N9000 N910 N920 A8 A8000
$0.96 Case for Samsung Galaxy S4 I9500 I9505 Silicone Soft TPU Phone Cover for Samsung Galaxy S4 Mini i9190 i9192 i9195 Case Shell Bag
$1.37 Protection For Blackview BV5500 Plus BV9900 Pro BV6800 BV9500 BV9700 A60 Hydrogel Film Screen Protector Cover Film
$0.6 Rear Camera Lens Glass With Adhesive Stick For Samsung Galaxy S3 S4 I9500 S5 Main Back Camera Lens Glass Cover Repair Parts
$0.96 Case for Samsung Galaxy S4 I9500 I9505 Silicone Soft TPU Phone Cover for Samsung Galaxy S4 Mini i9190 Case Shell Bag
$9.01 10W Fast Wireless Charger for iPhone 13mini Blackview BV6300 Pro BV9500 Pro Xiaomi Wireless Charging Pad Indicator Gift Case
$0.96 Silicone Case For Samsung S4 Case Samsung Galaxy S4 S 4 GT I9500 I9505 GT-I9500 GT-I9505 i9515 I9506 I9507 I9502 I9508 S4 Cases
| Find Similar devices | |
|---|---|
| Same CPU: | |
| Same Display resolution: | |
| Same ro.build.description: | |
