1. Install SpecDevice
2. Run and decode your specs
3. Get your link (read more...)
General Specifications | |
---|---|
Manufacturer | alps |
Model | SM-T215 |
Firmware | 4.2.2; user.fanjunwei.1381996923; SDK15 |
CPU | 2 cores; ARMv7 Processor rev 10 (v7l); Max: 1001.0 MHz; Min: 166.8 MHz |
Display | 800 x 480; DPI: 120; Evaluated Size: 7.8" |
Touch screen | Multitouch 5 points |
GPU | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.8@905891 |
RAM | 512 MB (496 MB available) |
Flash | 4 GB (3.676 GB actual); 4 GB (3.693 GB actual) (see memory map tab) |
Communications | |
Phone | GSM, Dual SIM |
WiFi | wlan_mt6628; IEEE 802.11 b/g/n; MediaTek MT6628; AP Mode |
USB Host | Yes |
Bluetooth | Bluetooth 3.0+HS, 4.0 |
GPS | Yes |
Advanced Features | |
Front camera | Photo: 0.3 MP; Max: 640x480; Focus: infinity; No flash |
Back camera | Photo: 0.3 MP; Max size: 640x480; Focus: infinity; No flash |
Sensors | bma222 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0.004 (0.012%); power: 0.13mA; |
tmd2771 Proximity Sensor (Capella); range: 0...1; resolution: 1 (100%); power: 0.13mA; | |
tmd2771 Light Sensor (Capella); range: 0...10240; resolution: 1 (0.01%); power: 0.13mA; | |
Vibrator | Yes |
Supported languages | 43; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
Battery | Technology: Li-ion; Voltage: 3736 |
FM radio | Supported by chipset |
SD Version: | 1.1 5 |
KERNEL: Linux version 3.0.13 (fanjunwei@android02) (gcc version 4.4.3 (GCC) ) #1 PREEMPT Thu Oct 17 16:01:46 CST 2013
CODENAME: REL
Mainboard: baoxue
BRAND: alps
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: baoxue
DISPLAY: ALPS.ICS.MP.V2.26
FINGERPRINT: alps/baoxue/baoxue:4.0.4/F10/1381996923:user/test-keys
HARDWARE: mt6575
ID: F10
TAGS: test-keys
Processor : ARMv7 Processor rev 10 (v7l)
BogoMIPS : 1993.93
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc09
CPU revision : 10
Hardware : mt6577
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<5>[64904.392204] [Power/Alarm] alarm_timer_triggered type 0 at 1414817333.201013784 (1)
<5>[64904.393608] [Power/Alarm] alarm 0 set 1414817414.050000000
<5>[64904.410157] [Power/Alarm] alarm wait (0x0)
<7>[64904.428126] WQ_WARN: cpu:0, proc:kworker/0:3, dur: 8424077 > 8ms
<7>[64904.428143] work: kcryptd_crypt+0x0/0x3f8
<7>[64904.443130] WQ_WARN: cpu:0, proc:kworker/0:3, dur: 11776385 > 8ms
<7>[64904.443152] work: kcryptd_crypt+0x0/0x3f8
<7>[64904.522448] WQ_WARN: cpu:0, proc:kworker/0:3, dur: 17539462 > 8ms
<7>[64904.522465] work: kcryptd_crypt+0x0/0x3f8
<7>[64904.533211] [2600:er.line.android] set proc[2600] name: ->[pool-25-thread-]
<7>[64904.564620] WQ_WARN: cpu:0, proc:kworker/0:3, dur: 9515230 > 8ms
<7>[64904.564637] work: kcryptd_crypt+0x0/0x3f8
<7>[64904.577195] WQ_WARN: cpu:0, proc:kworker/0:3, dur: 8099923 > 8ms
<7>[64904.577212] work: kcryptd_crypt+0x0/0x3f8
<7>[64904.577588] [2601:pool-5-thread-1] set proc[2601] name: ->[pool-14-thread-]
<7>[64904.739518] WQ_WARN: cpu:0, proc:kworker/0:3, dur: 18192154 > 8ms
<7>[64904.739535] work: kcryptd_crypt+0x0/0x3f8
<5>[64904.752749] [Power/Alarm] alarm 0 set 1414817336.549000000
<7>[64904.770681] [2588:dmesg] exit
<7>[64904.770837] [2588:dmesg] sig 17 to [2468:AsyncTask #2]
<7>[64904.805967] WQ_WARN: cpu:0, proc:kworker/0:3, dur: 10035461 > 8ms
<7>[64904.805985] work: kcryptd_crypt+0x0/0x3f8
<7>[64904.846083] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 10586769 > 8ms
<7>[64904.846112] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[64904.902596] WQ_WARN: cpu:0, proc:kworker/0:3, dur: 13696000 > 8ms
<7>[64904.902614] work: kcryptd_crypt+0x0/0x3f8
<7>[64905.273467] WQ_WARN: cpu:0, proc:kworker/0:3, dur: 10401385 > 8ms
<7>[64905.273484] work: kcryptd_crypt+0x0/0x3f8
<7>[64905.299369] WQ_WARN: cpu:0, proc:kworker/0:3, dur: 10052923 > 8ms
<7>[64905.299386] work: kcryptd_crypt+0x0/0x3f8
<4>[64905.367109] [2468:AsyncTask #2]Null page is returned, Repeat Times:1
<7>[64905.407743] [2602:WifiStateMachin] set proc[2602] name: ->[loadDriverThrea]
<6>[64905.499938] [WLAN] rfkill_set_block(blocked 0)
<6>[64905.499949] [WLAN] Power on
<3>[64905.499964] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[64905.500747] [STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[64905.500796] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[64905.501881] [WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(not defined)
<3>[64905.502630] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO112)
<3>[64905.503325] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(not defined)
<3>[64905.504106] [WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[64905.504800] [WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO78)
<3>[64905.511380] [WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(5)
<3>[64905.512112] [WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO81)
<3>[64905.512870] [WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(2)
<3>[64905.513618] [WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<3>[64905.514355] [WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[64905.515093] [WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[64905.524827] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[64905.534549] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[64905.536690] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[64905.541178] [WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_CK(GPIO56)
<3>[64905.548768] [WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_WS(GPIO57)
<3>[64905.549489] [WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_DAT(GPIO58)
<3>[64905.550339] [WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(not defined)
<3>[64905.553531] [WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(not defined)
<3>[64905.554614] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[64905.556085] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<3>[64905.559529] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[64905.561916] [WMT-PLAT][W]wmt_plat_gps_lna_ctrl:host gps lna pin not defined!!!
<3>[64905.563913] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<7>[64905.571971] [2603:er.line.android] set proc[2603] name: ->[pool-26-thread-]
<7>[64905.573592] [2564:ReferenceQueueD] exit
<7>[64905.573754] [2566:FinalizerDaemon] exit
<7>[64905.573889] [2567:FinalizerWatchd] exit
<7>[64905.585767] [2605:zygote] set proc[2605] name: ->[ReferenceQueueD]
<7>[64905.590006] [2606:zygote] set proc[2606] name: ->[FinalizerDaemon]
<7>[64905.590549] [2607:zygote] set proc[2607] name: ->[GC]
<7>[64905.591313] [2608:zygote] set proc[2608] name: ->[FinalizerWatchd]
<7>[64905.607638] [2609:zygote] set proc[2609] name: ->[Signal Catcher]
<7>[64905.609980] [2610:zygote] set proc[2610] name: ->[Compiler]
<7>[64905.612568] [2611:zygote] set proc[2611] name: ->[ReferenceQueueD]
<7>[64905.613469] [2612:zygote] set proc[2612] name: ->[FinalizerDaemon]
<7>[64905.614091] [2613:zygote] set proc[2613] name: ->[FinalizerWatchd]
<7>[64905.629149] [2604:zygote] set proc[2604] name: ->[cn.andouya]
<7>[64905.651743] [2614:er.ServerThread] set proc[2614] name: ->[Thread-1941]
<7>[64905.653407] [2614:Thread-1941] exit
<7>[64905.756776] [2604:cn.andouya] set proc[2604] name: ->[re-initialized>]
<7>[64905.762219] [2615:cn.andouya] set proc[2615] name: ->[Binder Thread #]
<3>[64905.775312] [WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[64905.776075] [WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<4>[64905.777024] [STP-PSM] [E]_stp_psm_notify_stp(1174):ERROR! Invalid Action!!
<4>[64905.777030]
<3>[64905.778058] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[64905.779163] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<4>[64905.780203] mt6575_get_bus_freq() return 260000
<7>[64905.783642] [2604:re-initialized>] set proc[2604] name: ->[cn.andouya]
<3>[64905.787768] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[64905.792201] Flush type = 4 Rx Queue
<3>[64905.793854] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[64905.794652] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[64905.794663] [STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<7>[64905.800769] [2616:Binder Thread #] set proc[2616] name: ->[Binder Thread #]
<4>[64905.800847] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[64905.801535] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<6>[64905.802233] [STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[64905.802244] [STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[64905.802254] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[64905.802265] [STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[64905.810306] [WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6628)
<3>[64905.811696] [WMT-CTRL][W]wmt_ctrl_rx:wmt_ctrl_rx be signaled, but no rx data(200)
<3>[64905.819792] [WMT-IC][I]mt6628_ver_check:MT6628: read hw_ver (hw version) (0x8b10)
<3>[64905.826321] [WMT-IC][I]mt6628_ver_check:MT6628: read fw_ver (rom version) (0x8b10)
<3>[64905.827277] [WMT-IC][I]mt6628_find_wmt_ic_info:found ic info(0x8b10) by full match! index:2
<3>[64905.831994] [WMT-IC][I]mt6628_ver_check:MT6628: wmt ic info: MT6628.E3 (0x8b10, WMTHWVER:2, patch_ext:_e2)
<3>[64905.833197] [WMT-CORE][I]wmt_core_hw_check:chip id(0x6628) ver_check ok
<3>[64905.849267] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[64905.850076] [WMT-IC][I]mt6628_sw_init:WMT-CORE: change baudrate(4000000) ok
<7>[64905.856454] WQ_WARN: cpu:0, proc:kworker/0:3, dur: 20038385 > 8ms
<7>[64905.856573] work: kcryptd_crypt+0x0/0x3f8
<3>[64905.863256] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(srh_patch) result(0)
<3>[64905.864013] [WMT-IC][I]mt6628_patch_dwn:valid patch found: (/system/etc/firmware//mt6628_patch_e2_hdr.bin)
<3>[64905.868241] [WMT-IC][I]mt6628_patch_dwn:===========================================
<3>[64905.869213] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Built Time = 20120807180955a
<3>[64905.870151] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[64905.873791] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[64905.874587] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Ph Ver = 0x0010
<3>[64905.875496] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Platform = 1212
<3>[64905.880160] [WMT-IC][I]mt6628_patch_dwn:===========================================
<7>[64905.939503] WQ_WARN: cpu:0, proc:kworker/0:3, dur: 11571846 > 8ms
<7>[64905.939520] work: kcryptd_crypt+0x0/0x3f8
<7>[64905.955061] WQ_WARN: cpu:0, proc:kworker/0:3, dur: 14630461 > 8ms
<7>[64905.955078] work: kcryptd_crypt+0x0/0x3f8
<7>[64905.968765] WQ_WARN: cpu:0, proc:kworker/0:3, dur: 13668692 > 8ms
<7>[64905.968782] work: kcryptd_crypt+0x0/0x3f8
<7>[64905.987623] WQ_WARN: cpu:0, proc:kworker/0:3, dur: 18822692 > 8ms
<7>[64905.987639] work: kcryptd_crypt+0x0/0x3f8
<3>[64906.034414] [WMT-IC][I]mt6628_patch_dwn:wmt_core: patch dwn:0 frag(20, 928) ok
<3>[64906.038772] [WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf14841c)
<3>[64906.040168] [WMT-IC][I]mt6628_sw_init:init_coex ok
<6>[64906.041270] [STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[64906.041283] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[64906.041294] [STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[64906.041303] [WMT-IC][I]mt6628_sw_init:enable host STP-UART-FULL mode
<3>[64906.060078] [WMT-IC][I]mt6628_sw_init:set fm mode (2) ok
<3>[64906.060734] [WMT-IC][I]mt6628_sw_init:disable mt662x firmware coredump
<6>[64906.061547] [STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[64906.061560] [STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[64906.061571] mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[64906.062248] board_sdio_ctrl force off before on
<6>[64906.062254] mtk_wcn_cmb_sdio_off (3)
<6>[64906.062291] mtk_wcn_cmb_sdio_on (3)
<3>[64906.062323] msdc3 -> USR Resume <- msdc_pm() : L<1464> PID
<3>[64906.075498] msdc3 -> ================ <- msdc_set_mclk() : L<770> PID
<3>[64906.076517] msdc3 -> !!! Set<400KHz> Source<197000KHz> -> sclk<397KHz> DDR<0> mode<0> div<124> <- msdc_set_mclk() : L<772> PID
<3>[64906.078150] msdc3 -> ================ <- msdc_set_mclk() : L<773> PID
<3>[64906.105490] msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1526> PID
<3>[64906.127530] msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<3453> PID
<3>[64906.128687] msdc3 -> ================ <- msdc_set_mclk() : L<770> PID
<3>[64906.129701] msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<772> PID
<3>[64906.131357] msdc3 -> ================ <- msdc_set_mclk() : L<773> PID
<6>[64906.137956] mmc2: new high speed SDIO card at address 0001
<6>[64906.138952] [WMT-DFT][I]hif_sdio_probe:start!
<6>[64906.138967] [WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x6628) num(0x1)
<6>[64906.138977] [WMT-DFT][I]hif_sdio_probe:card->info[0]: 6628
<6>[64906.138985] [WMT-DFT][I]hif_sdio_probe:card->info[1]: Combo
<6>[64906.138993] [WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[64906.139000] [WMT-DFT][I]hif_sdio_probe:card->info[3]:
<6>[64906.139099] [WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(520192)
<7>[64906.139128] WQ_WARN: cpu:1, proc:kworker/u:3, dur: 75412077 > 8ms
<7>[64906.139149] work: mmc_rescan+0x0/0x370
<6>[64906.215337] [WMT-DFT][I]hif_sdio_wifi_on:start!
<6>[64906.221323] [WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<5>[64906.221356] [wlan] net_device prDev(0xc5a7f000) allocated
<5>[64906.222797] [wlan] Open FW image: WIFI_RAM_CODE done
<4>[64906.229285] [RT_MONITOR]WARNNING [2617:ksdioirqd/mmc2] SET NOT ALLOW RT Prio [1] for proc [2617:ksdioirqd/mmc2]
<5>[64906.231096] [wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[64906.232060] [wlan] Virtual Address = e1c2f000 for COMMON MGMT MEMORY POOL.
<5>[64906.232906] [wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[64906.233565] [wlan] Virtual Address = e1c31000 for SW_RFB_T.
<5>[64906.234249] [wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[64906.234939] [wlan] Virtual Address = e1c35000 for MSDU_INFO_T.
<4>[64906.235874] Backtrace:
<4>[64906.236187] [
<4>[64906.240989] r7:00000001 r6:00000000 r5:c340a000 r4:c37eb000
<4>[64906.241700] [
<4>[64906.242827] [
<6>[64906.244255] [wlan] wlanAdapterStart(): Acquiring LP-OWN
<4>[64906.244336] [
<4>[64906.245716] [
<4>[64906.246786] [
<4>[64906.247733] r7:00000013 r6:c008a6d8 r5:c00a1d58 r4:dd84bd70
<6>[64906.256926] [wlan] Chip ID: 0x6628
<6>[64906.256941] [wlan] Revision ID: 0x0
<7>[64906.274101] [2618:cn.andouya] set proc[2618] name: ->[SharedPreferenc]
<7>[64906.306142] [2618:SharedPreferenc] exit
<5>[64906.422592] [Power/Alarm] alarm_timer_triggered type 2 at 466134.136011941 (1)
<5>[64906.423977] [Power/Alarm] alarm 2 set 466135.366000000
<5>[64906.434610] [Power/Alarm] alarm wait (0x0)
<7>[64906.532410] [2619:gle.android.gms] set proc[2619] name: ->[IntentService[S]
<7>[64906.548429] [2605:ReferenceQueueD] exit
<7>[64906.548619] [2606:FinalizerDaemon] exit
<7>[64906.548866] [2608:FinalizerWatchd] exit
<7>[64906.557758] [2619:IntentService[S] exit
<7>[64906.559198] [2621:zygote] set proc[2621] name: ->[ReferenceQueueD]
<7>[64906.566994] [2623:zygote] set proc[2623] name: ->[FinalizerDaemon]
<7>[64906.567772] [2622:zygote] set proc[2622] name: ->[GC]
<7>[64906.573226] [2624:zygote] set proc[2624] name: ->[FinalizerWatchd]
<7>[64906.575974] [2625:zygote] set proc[2625] name: ->[Signal Catcher]
<7>[64906.579186] [2626:zygote] set proc[2626] name: ->[Compiler]
<7>[64906.585737] [2627:zygote] set proc[2627] name: ->[ReferenceQueueD]
<7>[64906.588895] [2628:zygote] set proc[2628] name: ->[FinalizerDaemon]
<7>[64906.593119] [2629:zygote] set proc[2629] name: ->[FinalizerWatchd]
<7>[64906.593904] [2620:zygote] set proc[2620] name: ->[sh.whisper]
<7>[64906.607917] [2620:sh.whisper] set proc[2620] name: ->[re-initialized>]
<7>[64906.616898] [2630:sh.whisper] set proc[2630] name: ->[Binder Thread #]
<7>[64906.628126] [2620:re-initialized>] set proc[2620] name: ->[sh.whisper]
<7>[64906.636392] [2631:Binder Thread #] set proc[2631] name: ->[Binder Thread #]
<7>[64906.743990] [2076:pool-17-thread-] exit
<6>[64906.916849] [Power/Battery] [Battery] show_BatteryNotify : 0
<6>[64907.106835] [wlan] wlanAdapterStart(): Waiting for Ready bit..
<6>[64907.126273] [wlan] Ready bit asserted
<7>[64907.152304] WQ_WARN: cpu:0, proc:kworker/0:3, dur: 19077692 > 8ms
<7>[64907.152321] work: kcryptd_crypt+0x0/0x3f8
<7>[64907.171535] WQ_WARN: cpu:0, proc:kworker/0:3, dur: 17756846 > 8ms
<7>[64907.171553] work: kcryptd_crypt+0x0/0x3f8
<7>[64907.190044] WQ_WARN: cpu:0, proc:kworker/0:3, dur: 18472461 > 8ms
<7>[64907.190061] work: kcryptd_crypt+0x0/0x3f8
<7>[64907.234524] WQ_WARN: cpu:0, proc:kworker/0:3, dur: 42348000 > 8ms
<7>[64907.234546] work: kcryptd_crypt+0x0/0x3f8
<5>[64907.253210] [wlan] RF CAL FAIL = (0),BB CAL FAIL = (0)
<5>[64907.254075] [wlan] [wifi] wlan%d netif_carrier_off
<6>[64907.254685] [wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[64907.254762] [wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[64907.254880] [wlan] Domain: map=0, idx=0, code=0x0000
<5>[64907.269246] [wlan] tx_thread starts running...
<6>[64907.296937] [WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(6628) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[64907.296951] [WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[64907.296968] [WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 coredump:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[64907.307810] [STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<3>[64907.308504] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<4>[64907.309442] [STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<7>[64907.311851] [2602:loadDriverThrea] exit
<6>[64907.343895] [RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[64907.343918] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[64907.370095] WQ_WARN: cpu:0, proc:kworker/0:3, dur: 26084000 > 8ms
<7>[64907.370173] work: wlanSetMulticastListWorkQueue+0x0/0x1f4 [wlan_mt6628]
<7>[64907.375285] [2634:WifiStateMachin] set proc[2634] name: ->[WifiMonitor]
<7>[64907.386899] [2633:init] set proc[2633] name: ->[logwrapper]
<7>[64907.407516] [2635:logwrapper] set proc[2635] name: ->[wpa_supplicant]
<7>[64907.441685] WQ_WARN: cpu:0, proc:kworker/0:3, dur: 11234385 > 8ms
<7>[64907.441703] work: kcryptd_crypt+0x0/0x3f8
<7>[64907.485291] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 9106231 > 8ms
<7>[64907.485318] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[64907.615332] [2636:sh.whisper] set proc[2636] name: ->[SharedPreferenc]
<7>[64907.637932] [2636:SharedPreferenc] exit
<5>[64907.645795] [wlan] N=0 closed
<5>[64907.646163] [wlan] EVENT-ROAMING ABORT: Current Time = 53324820
<5>[64907.651494] [wlan] [13] TRANSITION: [0] -> [0]
<5>[64907.652591] [Power/Alarm] alarm_timer_triggered type 2 at 466135.366012633 (1)
<5>[64907.653951] [Power/Alarm] alarm 2 set 466141.681000000
<5>[64907.655881] [Power/Alarm] alarm wait (0x0)
<6>[64907.675363] [wlan] NAF=0,0,0
<6>[64907.675377] [wlan] NAF=0,0,0
<7>[64907.735304] [2637:sh.whisper] set proc[2637] name: ->[Thread-2337]
<5>[64907.740198] [Power/Alarm] alarm_timer_triggered type 0 at 1414817336.549008553 (1)
<5>[64907.741569] [Power/Alarm] alarm 0 set 1414817414.050000000
<5>[64907.747438] [Power/Alarm] alarm wait (0x0)
<7>[64907.762366] [2638:Thread-2337] set proc[2638] name: ->[SharedPreferenc]
<7>[64907.762986] [2639:sh.whisper] set proc[2639] name: ->[pool-1-thread-1]
<7>[64907.764631] [2640:sh.whisper] set proc[2640] name: ->[Thread-2340]
<5>[64907.785919] [wlan] [13] TRANSITION: [0] -> [2]
<7>[64907.817181] [2638:SharedPreferenc] exit
<7>[64907.834134] [2641:sh.whisper] set proc[2641] name: ->[RefQueueWorker@]
<7>[64907.834421] [2642:Thread-2337] set proc[2642] name: ->[pool-2-thread-1]
<7>[64907.855395] [2643:Thread-2337] set proc[2643] name: ->[SharedPreferenc]
<7>[64907.855516] WQ_WARN: cpu:0, proc:kworker/0:3, dur: 18194385 > 8ms
<7>[64907.855531] work: kcryptd_crypt+0x0/0x3f8
<7>[64907.901915] [2643:SharedPreferenc] exit
<7>[64907.911055] WQ_WARN: cpu:0, proc:kworker/0:3, dur: 15548769 > 8ms
<7>[64907.911072] work: kcryptd_crypt+0x0/0x3f8
<7>[64907.941737] WQ_WARN: cpu:0, proc:kworker/0:3, dur: 9961769 > 8ms
<7>[64907.941754] work: kcryptd_crypt+0x0/0x3f8
<7>[64908.022879] [2644:sh.whisper] set proc[2644] name: ->[Thread-2348]
<7>[64908.035964] WQ_WARN: cpu:0, proc:kworker/0:3, dur: 10981231 > 8ms
<7>[64908.035984] work: kcryptd_crypt+0x0/0x3f8
<7>[64908.043974] [2644:Thread-2348] exit
<7>[64908.064950] [2645:sh.whisper] set proc[2645] name: ->[Thread-2349]
<7>[64908.095734] [2645:Thread-2349] exit
<5>[64908.106568] [wlan] [13] TRANSITION: [2] -> [0]
<6>[64908.109164] [wlan] NAF=0,0,0
<5>[64908.109535] [wlan] N=0 closed
<5>[64908.110087] [wlan] EVENT-ROAMING ABORT: Current Time = 53325280
<5>[64908.110815] [wlan] [13] TRANSITION: [0] -> [0]
<5>[64908.111369] [wlan] [13] TRANSITION: [0] -> [1]
<5>[64908.111932] [wlan] [13] TRANSITION: [1] -> [6]
<5>[64908.112478] [wlan] ChReq net=0 token=1 b=1 c=6 s=0
<6>[64908.129854] [wlan] NAF=0,0,0
<5>[64908.130898] [wlan] ChGrant net=0 token=1 ch=6 sco=0
<5>[64908.132765] [wlan] [13] TRANSITION: [6] -> [7]
<5>[64908.135931] [wlan] STA 40mAllowed=1
<6>[64908.147860] [wlan] Wait Cmd TxSeqNum:1
<6>[64908.154453] [wlan] EVENT_ID_TX_DONE PacketSeq:1 ucStatus: 0 SN: 26
<6>[64908.157952] [wlan] Wait Cmd TxSeqNum:2
<6>[64908.160535] [wlan] EVENT_ID_TX_DONE PacketSeq:2 ucStatus: 0 SN: 27
<6>[64908.162437] [wlan] QM: (fgIsWmmSupported=1, fgSupportQoS=1)
<6>[64908.162454] [wlan] QM: (fgIsWmmSupported=1, fgIsQoS=1)
<6>[64908.162464] [wlan] MQM: Assoc_Rsp Parsing (QoS Enabled=1)
<5>[64908.162483] [wlan] N=0 b=1 c=6 s=0 e=0 h=0 I=0x08 l=1 p=0
<5>[64908.163153] [wlan]
<4>[64908.163385] 84:1b:5e:3c:7d:3e [17] TRANSITION: [0] -> [3]
<4>[64908.163390]
<5>[64908.168502] [wlan] [wifi] wlan0 netif_carrier_on [ssid:NETGEAR 84:1b:5e:3c:7d:3e]
<5>[64908.173341] [wlan] EVENT-ROAMING START: Current Time = 53325340
<5>[64908.174173] [wlan] [27] TRANSITION: [0] -> [1]
<5>[64908.181722] [wlan] [13] TRANSITION: [7] -> [10]
<6>[64908.183846] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<7>[64908.183972] WQ_WARN: cpu:0, proc:kworker/0:3, dur: 15479615 > 8ms
<7>[64908.183988] work: linkwatch_event+0x0/0x3c
<5>[64908.195676] [wlan] QM:Event +RxBa
<5>[64908.200471] [wlan] QM: +RxBA(STA=0 TID=0 WinStart=0 WinEnd=11 WinSize=12)
<6>[64908.201917] [wlan] QM:(BAR)(0)(0){0,11}
<5>[64908.201929] [wlan] R1X len=135
<5>[64908.204325] [wlan] QM: +STA[0]
<5>[64908.213372] [wlan] T1X len=135
<7>[64908.214962] WQ_WARN: cpu:0, proc:kworker/0:3, dur: 30956154 > 8ms
<7>[64908.215031] work: wlanSetMulticastListWorkQueue+0x0/0x1f4 [wlan_mt6628]
<5>[64908.230738] [wlan] R1X len=169
<5>[64908.231712] [wlan] T1X len=113
<7>[64908.248913] [2637:Thread-2337] exit
<5>[64908.275124] [wlan] N=0 b=1 c=6 s=0 e=0 h=0 I=0x08 l=1 p=0
<7>[64908.277517] [2646:pool-1-thread-1] set proc[2646] name: ->[SharedPreferenc]
<7>[64908.307624] [2646:SharedPreferenc] exit
<7>[64908.327314] [2647:pool-1-thread-1] set proc[2647] name: ->[RefQueueWorker@]
<7>[64908.376072] [2648:pool-1-thread-1] set proc[2648] name: ->[SharedPreferenc]
<5>[64908.377768] [wlan] N=0 b=1 c=6 s=0 e=0 h=0 I=0x08 l=1 p=0
<7>[64908.384199] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 13720847 > 8ms
<7>[64908.384227] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[64908.400017] [2649:netd] exit
<7>[64908.401408] [2648:SharedPreferenc] exit
<7>[64908.421399] [2650:WifiStateMachin] set proc[2650] name: ->[DhcpStateMachin]
<5>[64908.427927] [wlan] CMD set_band=0
<6>[64908.466438] [wlan] eNetTypeIndex:0, ePwrMode:0, fgEnCmdEvent:1
<5>[64908.466461] [wlan] Set Wi-Fi PS mode to CAM (0)
<7>[64908.470690] [2651:init] set proc[2651] name: ->[logwrapper]
<7>[64908.496178] [2652:logwrapper] set proc[2652] name: ->[dhcpcd]
<7>[64908.538837] [2653:dhcpcd] set proc[2653] name: ->[dhcpcd-run-hook]
<7>[64908.567638] [2654:dhcpcd-run-hook] set proc[2654] name: ->[ls]
<7>[64908.581037] [2654:ls] exit
<7>[64908.581160] [2654:ls] sig 17 to [2653:dhcpcd-run-hook]
<7>[64908.594281] [2655:dhcpcd-run-hook] set proc[2655] name: ->[ls]
<7>[64908.598233] [2656:sh.whisper] set proc[2656] name: ->[Picasso-Stats]
<7>[64908.602729] [2655:ls] exit
<7>[64908.602856] [2655:ls] sig 17 to [2653:dhcpcd-run-hook]
<7>[64908.603220] [2657:sh.whisper] set proc[2657] name: ->[Picasso-Dispatc]
<7>[64908.650476] [2658:dhcpcd-run-hook] set proc[2658] name: ->[ls]
<7>[64908.652713] [2658:ls] exit
<7>[64908.653494] [2658:ls] sig 17 to [2653:dhcpcd-run-hook]
<7>[64908.731872] [2659:dhcpcd-run-hook] set proc[2659] name: ->[setprop]
<7>[64908.735417] [2659:setprop] exit
<7>[64908.735541] [2659:setprop] sig 17 to [2653:dhcpcd-run-hook]
<7>[64908.741411] [2660:dhcpcd-run-hook] set proc[2660] name: ->[ls]
<7>[64908.743634] [2660:ls] exit
<7>[64908.743751] [2660:ls] sig 17 to [2653:dhcpcd-run-hook]
<7>[64908.743975] [2653:dhcpcd-run-hook] exit
<7>[64908.744074] [2653:dhcpcd-run-hook] sig 17 to [2652:dhcpcd]
<5>[64908.773815] [Power/Alarm] alarm 2 set 466141.475000000
<6>[64908.786037] [RTlog insert] fib_inetaddr_event() wlan0 NETDEV_UP!
<6>[64908.786199] << [RTlog delete] inet_rtm_delroute !
<6>[64908.786211] [RTlog info] inet_rtm_delroute cfg.fc_dst =0001a8c0
<6>[64908.786218] [RTlog info] inet_rtm_delroute cfg.fc_gw =00000000 >>
<6>[64908.786515] << [RTlog insert] inet_rtm_newroute !
<6>[64908.786528] [RTlog info] inet_rtm_newroute cfg.fc_dst =0001a8c0
<6>[64908.786535] [RTlog info] inet_rtm_newroute cfg.fc_gw =00000000 >>
<6>[64908.786814] << [RTlog insert] inet_rtm_newroute !
<6>[64908.786825] [RTlog info] inet_rtm_newroute cfg.fc_dst =00000000
<6>[64908.786833] [RTlog info] inet_rtm_newroute cfg.fc_gw =0101a8c0 >>
<7>[64908.787728] [2661:sh.whisper] set proc[2661] name: ->[Picasso-refQueu]
<7>[64908.788877] [2662:dhcpcd] set proc[2662] name: ->[dhcpcd-run-hook]
<7>[64908.796146] [2663:dhcpcd-run-hook] set proc[2663] name: ->[ls]
<7>[64908.798525] [2663:ls] exit
<7>[64908.798653] [2663:ls] sig 17 to [2662:dhcpcd-run-hook]
<7>[64908.802649] [2664:dhcpcd-run-hook] set proc[2664] name: ->[ls]
<7>[64908.804880] [2664:ls] exit
<7>[64908.805002] [2664:ls] sig 17 to [2662:dhcpcd-run-hook]
<7>[64908.814256] [2665:dhcpcd-run-hook] set proc[2665] name: ->[setprop]
<7>[64908.815386] [2666:sh.whisper] set proc[2666] name: ->[pool-6-thread-1]
<7>[64908.817580] [2665:setprop] exit
<7>[64908.817702] [2665:setprop] sig 17 to [2662:dhcpcd-run-hook]
<7>[64908.828271] [2668:pool-6-thread-1] set proc[2668] name: ->[SharedPreferenc]
<7>[64908.835162] [2667:dhcpcd-run-hook] set proc[2667] name: ->[setprop]
<7>[64908.836263] [2668:SharedPreferenc] exit
<7>[64908.877136] [2667:setprop] exit
<7>[64908.877259] [2667:setprop] sig 17 to [2662:dhcpcd-run-hook]
<7>[64908.886562] [2669:dhcpcd-run-hook] set proc[2669] name: ->[setprop]
<7>[64908.888017] [2670:sh.whisper] set proc[2670] name: ->[AnalyticsWorker]
<5>[64908.908228] [Power/Alarm] alarm 2 set 466141.475000000
<7>[64908.911210] [2669:setprop] exit
<7>[64908.911330] [2669:setprop] sig 17 to [2662:dhcpcd-run-hook]
<7>[64908.916045] [2671:dhcpcd-run-hook] set proc[2671] name: ->[setprop]
<7>[64908.918415] [2671:setprop] exit
<7>[64908.918766] [2671:setprop] sig 17 to [2662:dhcpcd-run-hook]
<4>[64908.938347] select 2315 (.quicksearchbox), adj 10, size 5279, to kill
<4>[64908.939145] select 2414 (d.process.acore), adj 10, size 8941, to kill
<4>[64908.939949] send sigkill to 2414 (d.process.acore), adj 10, size 8941
<7>[64908.940749] [2672:dhcpcd-run-hook] sig 9 to [2414:d.process.acore]
<7>[64908.942808] [2672:dhcpcd-run-hook] set proc[2672] name: ->[setprop]
<7>[64908.949355] [2414:d.process.acore] exit
<7>[64908.951253] [2672:setprop] exit
<7>[64908.951371] [2672:setprop] sig 17 to [2662:dhcpcd-run-hook]
<7>[64908.951895] [2420:Compiler] exit
<7>[64908.951934] [2421:ReferenceQueueD] exit
<7>[64908.951959] [2422:FinalizerDaemon] exit
<7>[64908.951985] [2424:FinalizerWatchd] exit
<7>[64908.952009] [2442:ContactsProvide] exit
<7>[64908.952042] [2419:Signal Catcher] exit
<7>[64908.952066] [2416:GC] exit
<7>[64908.956967] [2673:dhcpcd-run-hook] set proc[2673] name: ->[setprop]
<7>[64908.959570] [2673:setprop] exit
<7>[64908.959688] [2673:setprop] sig 17 to [2662:dhcpcd-run-hook]
<7>[64908.960964] [2674:dhcpcd-run-hook] set proc[2674] name: ->[setprop]
<7>[64908.967215] [2674:setprop] exit
<7>[64908.967483] [2674:setprop] sig 17 to [2662:dhcpcd-run-hook]
<7>[64908.968465] [2425:Binder Thread #] exit
<7>[64908.968541] [2428:Binder Thread #] exit
<7>[64908.968570] [2445:Binder Thread #] exit
<7>[64908.969506] [2440:ApplicationsPro] exit
<7>[64909.002476] [2675:dhcpcd-run-hook] set proc[2675] name: ->[ls]
<7>[64909.008291] [2675:ls] exit
<7>[64909.008415] [2675:ls] sig 17 to [2662:dhcpcd-run-hook]
<7>[64909.009552] [2676:dhcpcd-run-hook] set proc[2676] name: ->[setprop]
<7>[64909.012583] [2676:setprop] exit
<7>[64909.012708] [2676:setprop] sig 17 to [2662:dhcpcd-run-hook]
<7>[64909.089220] [2677:dhcpcd-run-hook] set proc[2677] name: ->[setprop]
<7>[64909.091618] [2677:setprop] exit
<7>[64909.091745] [2677:setprop] sig 17 to [2662:dhcpcd-run-hook]
<7>[64909.098018] [2678:dhcpcd-run-hook] set proc[2678] name: ->[setprop]
<7>[64909.105092] [2678:setprop] exit
<7>[64909.105392] [2678:setprop] sig 17 to [2662:dhcpcd-run-hook]
<7>[64909.111733] [2679:dhcpcd-run-hook] set proc[2679] name: ->[setprop]
<7>[64909.114122] [2679:setprop] exit
<7>[64909.114246] [2679:setprop] sig 17 to [2662:dhcpcd-run-hook]
<7>[64909.118147] [2680:dhcpcd-run-hook] set proc[2680] name: ->[setprop]
<7>[64909.120547] [2680:setprop] exit
<7>[64909.120671] [2680:setprop] sig 17 to [2662:dhcpcd-run-hook]
<7>[64909.121702] [2681:dhcpcd-run-hook] set proc[2681] name: ->[setprop]
<7>[64909.125316] [2681:setprop] exit
<7>[64909.125444] [2681:setprop] sig 17 to [2662:dhcpcd-run-hook]
<7>[64909.129926] [2682:dhcpcd-run-hook] set proc[2682] name: ->[setprop]
<7>[64909.132973] [2682:setprop] exit
<7>[64909.133205] [2682:setprop] sig 17 to [2662:dhcpcd-run-hook]
<7>[64909.140905] [2683:dhcpcd-run-hook] set proc[2683] name: ->[ls]
<7>[64909.143448] [2683:ls] exit
<7>[64909.143604] [2683:ls] sig 17 to [2662:dhcpcd-run-hook]
<7>[64909.143897] [2662:dhcpcd-run-hook] exit
<7>[64909.144005] [2662:dhcpcd-run-hook] sig 17 to [2652:dhcpcd]
<7>[64909.289271] WQ_WARN: cpu:1, proc:kworker/u:3, dur: 11560693 > 8ms
<7>[64909.289293] work: binder_deferred_func+0x0/0x7a8
<7>[64909.295096] [2440:ApplicationsPro] sig 17 to [99:zygote]
<7>[64909.328762] [2685:Binder Thread #] set proc[2685] name: ->[executeAppTrans]
<7>[64909.360142] [2684:AsyncTask #2] set proc[2684] name: ->[dmesg]
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=F10
ro.build.display.id=ALPS.ICS.MP.V2.26
ro.build.version.incremental=user.fanjunwei.1381996923
ro.custom.build.version=user.F10_HWD_51-32_V01
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.2.2
ro.build.date=2013年 10月 24日 星期四 11:03:50 CST
ro.build.date.utc=1382583830
ro.build.type=user
ro.build.user=fanjunwei
ro.build.host=android02
ro.build.tags=test-keys
ro.product.model=baoxue
ro.product.brand=alps
ro.product.name=baoxue
ro.product.device=baoxue
ro.product.board=baoxue
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=alps
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=baoxue
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=baoxue-user 4.0.4 F10 user.fanjunwei.1381996923 test-keys
ro.build.fingerprint=alps/baoxue/baoxue:4.0.4/F10/1381996923:user/test-keys
ro.build.flavor=
ro.build.characteristics=tablet
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=ALPS.ICS.MP.V2.26
ro.mediatek.platform=MT6575
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.ICS.MP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=128m
# Encrypt phone function
ro.crypto.tmpfs_options=mode=0771,uid=1000,gid=1000
ro.crypto.fs_type=ext4
ro.crypto.fs_real_blkdev=/emmc@usrdata
ro.crypto.fs_mnt_point=/data
ro.crypto.fs_options=noauto_da_alloc
ro.crypto.fs_flags=0x00000406
# audio
ro.camera.sound.forced=0
ro.audio.silent=0
# USB Config Type
ro.sys.usb.storage.type=mtp,mass_storage
# USB BICR function
ro.sys.usb.bicr=yes
#
# ADDITIONAL_BUILD_PROPERTIES
#
fmradio.driver.chip=3
ro.sf.hwrotation=0
ril.current.share_modem=2
launcherplus.allappsgrid=2d
launcher2.allappsgrid=3d_20
curlockscreen=2
ro.mediatek.gemini_support=true
drm.service.enabled=true
fmradio.driver.enable=1
mediatek.wlan.chip=MT6628
mediatek.wlan.module.postfix=_mt6628
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.config.ringtone=Backroad.ogg
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
wlan_mt6628 276922 0 - Live 0xbf1fb000 (P)
cfg80211 122425 0 - Live 0xbf1d2000
mtk_fm_priv 2847 0 - Live 0xbf1ce000 (P)
mtk_fm_drv 108543 1 mtk_fm_priv, Live 0xbf1ab000
mtk_stp_bt 39942 0 - Live 0xbf19e000
mtk_stp_gps 37190 0 - Live 0xbf191000
mtk_stp_uart 21577 1 - Live 0xbf188000 (P)
mtk_stp_wmt 369150 7 wlan_mt6628,mtk_fm_priv,mtk_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf11f000 (P)
mtk_hif_sdio 18186 2 wlan_mt6628,mtk_stp_wmt, Live 0xbf116000
devinfo 756 0 - Live 0xbf112000 (P)
sec 109563 0 - Live 0xbf0f1000 (P)
mt6575_vcodec_kernel_driver 23817 2 - Live 0xbf0e6000 (P)
mt6575_m4u 110688 8 - Live 0xbf0c1000 (P)
ccmni 17214 0 - Live 0xbf0b8000 (P)
ccci 140504 15 ccmni, Live 0xbf08a000 (P)
ccci_plat 125364 3 sec,ccmni,ccci, Live 0xbf063000 (P)
mtk_drvb 5115 0 - Live 0xbf05e000 (P)
mtklfb 23522 0 - Live 0xbf054000
pvrsrvkm 232875 77 mtklfb, Live 0xbf00d000
alps_core 2221 0 - Live 0xbf009000 (P)
aed 15677 3 - Live 0xbf000000 (P)
RAM: 512 MB (496 MB available)
System RAM: 496.000MB
mtkfb.0: 6.000MB
Flash: 4 GB (3.676 GB actual); 4 GB (3.693 GB actual)
mmcblk0: 3.676 GB
mmcblk1: 3.693 GB
Touch Screen for alps SM-T215
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
Replacement Battery for alps SM-T215
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
Cover Cases for alps SM-T215
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
Find Similar devices | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |