1. Install SpecDevice
2. Run and decode your specs
3. Get your link (read more...)
| General Specifications | |
|---|---|
| Manufacturer | sprd |
| Model | X920e |
| Firmware | 4.1.1; W12.20_P20.01; SDK10 |
| CPU | 4 cores; Quard-Core ARMv7 Processor rev 1 (v7l) sprdbp; Max: 1000.0 MHz; Min: 400.0 MHz |
| Display | 800 x 480; DPI: 240; Evaluated Size: 3.9" |
| Touch screen | Multitouch 4 points |
| GPU | Mali-300; ARM; OpenGL ES-CM 1.1; OpenGL ES 2.0 |
| RAM | 256 MB (240 MB available) |
| Flash | 16 GB (14.817 GB actual); 0.5 GB (0.447 GB actual) (see memory map tab) |
| Communications | |
| Phone | GSM; Net: EDGE |
| WiFi | 8189es; IEEE 802.11 b/g/n; Realtek RTL8189ES |
| USB Host | No |
| Bluetooth | no |
| GPS | No |
| Advanced Features | |
| Front camera | Photo: 1.9 MP; Max: 1600x1200; Focus: auto auto-multi macro; Flash modes: off on torch |
| Back camera | Photo: 1.9 MP; Max size: 1600x1200; Focus: auto; No flash |
| Sensors | AK8975 3-axis Magnetic field sensor (Asahi Kasei Microdevices); range: 0...1228.8; resolution: 0.06 (0.005%); power: 0.35mA; |
| Memsic MXC622x 2-axis Accelerometer (Memsic); range: 0...19.613; resolution: 0.153 (0.781%); power: 0.7mA; | |
| AL3006 Light sensor (LITEON); range: 0...1; resolution: 100000 (10000000%); power: 0.005mA; | |
| AL3006 Proximity sensor (LITEON); range: 0...1; resolution: 1 (100%); power: 0.005mA; | |
| Gravity Sensor (Google Inc.); range: 0...19.613; resolution: 0.153 (0.781%); power: 0.7mA; | |
| Linear Acceleration Sensor (Google Inc.); range: 0...19.613; resolution: 0.153 (0.781%); power: 0.7mA; | |
| Rotation Vector Sensor (Google Inc.); range: 0...1; resolution: 0 (0%); power: 1.05mA; | |
| Vibrator | Yes |
| Supported languages | 57; Amharic; Arabic; Bulgarian; Bengali; Tibetan; Catalan; Cebuano; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Gujarati; Hausa; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Georgian; Kazakh; Khmer; Korean; Lao; Lithuanian; Latvian; Malay; Burmese; Norwegian; Dutch; Punjabi; Polish; Portuguese; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Swahili; Tamil; Telugu; Thai; Tagalog; Turkish; Uighur; Ukrainian; Urdu; Vietnamese; Chinese |
| Battery | Technology: Li-ion; Voltage: 3914 |
| SD Version: | 1.1 5 |
KERNEL: Linux version 2.6.35.7 (kw@chengwh) (gcc version 4.4.3 (GCC) ) #3 Sat Jun 15 11:15:47 CST 2013
CODENAME: REL
Mainboard: project_kw_d8_dx_fl
BRAND: X920e
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: hsdroid
DISPLAY: MocorDroid2.3.5.W12.20_P20.01
FINGERPRINT: X920e/sprdroid_base/hsdroid:4.1.1/MocorDroid2.3.5/W12.20_P20.01:user/test-keys
HARDWARE: sp6820a
ID: MocorDroid2.3.5
TAGS: test-keys
Processor : Quard-Core ARMv7 Processor rev 1 (v7l)
processor : 0
BogoMIPS : 1024.00
processor : 1
BogoMIPS : 1024.00
Features : swp half thumb fastmult vfp edsp neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xc05
CPU revision : 1
Hardware : MTK6589
Revision : 0101
Serial : 0000000000000000
GL_OES_texture_npot
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_standard_derivatives
GL_OES_EGL_image
GL_OES_depth24
GL_ARM_rgba8
GL_ARM_mali_shader_binary
GL_OES_depth_texture
GL_OES_packed_depth_stencil
GL_EXT_texture_format_BGRA8888
GL_EXT_blend_minmax
GL_OES_EGL_image_external
GL_OES_EGL_sync
GL_EXT_multisampled_render_to_texture
GL_EXT_discard_framebuffer
GL_OES_get_program_binary
GL_EXT_shader_texture_lod
<4>[10226.498000] x = -7, y = 63
<6>[10226.498000] mxc622x read x=-7, y=63, z=32
<6>[10226.498000] mxc622x poll interval 50
<4>[10226.545000] x = -11, y = 61
<6>[10226.545000] mxc622x read x=-11, y=61, z=32
<6>[10226.545000] mxc622x poll interval 50
<4>[10226.594000] x = -13, y = 60
<6>[10226.594000] mxc622x read x=-13, y=60, z=32
<6>[10226.594000] mxc622x poll interval 50
<4>[10226.671000] x = -12, y = 60
<6>[10226.671000] mxc622x read x=-12, y=60, z=32
<6>[10226.672000] mxc622x poll interval 50
<4>[10226.714000] x = -12, y = 62
<6>[10226.714000] mxc622x read x=-12, y=62, z=32
<6>[10226.714000] mxc622x poll interval 50
<4>[10226.765000] x = -12, y = 61
<6>[10226.765000] mxc622x read x=-12, y=61, z=32
<6>[10226.765000] mxc622x poll interval 50
<4>[10226.815000] x = -11, y = 62
<6>[10226.815000] mxc622x read x=-11, y=62, z=32
<6>[10226.815000] mxc622x poll interval 50
<4>[10226.873000] rtl8189es driver version=v4.1.1_5107.20120907
<4>[10226.873000] build time: Jun 15 2013 10:22:07
<4>[10226.873000] rtw_drv_entry: gpio_wifi_power=65535, gpio_wifi_pwd=137
<4>[10226.873000] rtw_drv_entry: turn on VDD-WIFI0 3.3V
<4>[10226.874000] rtw_drv_entry: turn on VDD-WIFI0 1.2V
<4>[10226.874000] rtw_drv_entry: turn on VSIM2 2.8V
<4>[10226.879000] sdhci_bus_scan, entry
<4>[10227.081000] ##########rtw_suspend_lock_init ###########
<4>[10227.082000] mmc1: !!!!! error in sending cmd:52, int:0x10000, err:-110
<4>[10227.096000] x = -12, y = 61
<6>[10227.096000] mxc622x read x=-12, y=61, z=32
<6>[10227.096000] mxc622x poll interval 50
<4>[10227.121000] eic_handler
<4>[10227.121000] eic_handler
<4>[10227.129000] ==work 1=
<6>[10227.155000] CY8CTST242 ===touch_point = 1
<6>[10227.155000] CY8CTST242 ===x1 = 431,y1 = 528 ====
<4>[10227.155000] eic_handler
<4>[10227.155000] eic_handler
<4>[10227.155000] ==work 1=
<4>[10227.156000] store, policy->governor->name:ondemand
<4>[10227.157000] x = -8, y = 63
<6>[10227.157000] mxc622x read x=-8, y=63, z=32
<6>[10227.157000] mxc622x poll interval 50
<6>[10227.158000] CY8CTST242 ===touch_point = 1
<6>[10227.158000] CY8CTST242 ===x1 = 431,y1 = 528 ====
<4>[10227.191000] eic_handler
<4>[10227.191000] eic_handler
<4>[10227.191000] ==work 1=
<6>[10227.202000] CY8CTST242 ===touch_point = 1
<6>[10227.202000] CY8CTST242 ===x1 = 429,y1 = 528 ====
<4>[10227.205000] x = -11, y = 62
<6>[10227.205000] mxc622x read x=-11, y=62, z=32
<6>[10227.205000] mxc622x poll interval 50
<4>[10227.226000] eic_handler
<4>[10227.226000] eic_handler
<4>[10227.231000] ==work 1=
<6>[10227.233000] CY8CTST242 ===touch_point = 1
<6>[10227.233000] CY8CTST242 ===x1 = 427,y1 = 528 ====
<4>[10227.246000] eic_handler
<4>[10227.246000] eic_handler
<4>[10227.246000] ==work 1=
<6>[10227.248000] CY8CTST242 ===touch_point = 1
<6>[10227.248000] CY8CTST242 ===x1 = 423,y1 = 528 ====
<4>[10227.261000] x = -7, y = 64
<6>[10227.261000] mxc622x read x=-7, y=64, z=32
<6>[10227.261000] mxc622x poll interval 50
<4>[10227.266000] eic_handler
<4>[10227.266000] eic_handler
<4>[10227.266000] ==work 1=
<6>[10227.269000] CY8CTST242 ===touch_point = 1
<6>[10227.269000] CY8CTST242 ===x1 = 422,y1 = 530 ====
<4>[10227.286000] eic_handler
<4>[10227.286000] eic_handler
<4>[10227.287000] ==work 1=
<6>[10227.295000] CY8CTST242 ===touch_point = 1
<6>[10227.295000] CY8CTST242 ===x1 = 419,y1 = 532 ====
<4>[10227.307000] eic_handler
<4>[10227.307000] eic_handler
<4>[10227.311000] x = -10, y = 62
<6>[10227.311000] mxc622x read x=-10, y=62, z=32
<6>[10227.311000] mxc622x poll interval 50
<4>[10227.311000] ==work 1=
<6>[10227.313000] CY8CTST242 ===touch_point = 1
<6>[10227.313000] CY8CTST242 ===x1 = 416,y1 = 535 ====
<4>[10227.326000] eic_handler
<4>[10227.326000] eic_handler
<4>[10227.327000] ==work 1=
<6>[10227.329000] CY8CTST242 ===touch_point = 1
<6>[10227.329000] CY8CTST242 ===x1 = 409,y1 = 544 ====
<4>[10227.345000] eic_handler
<4>[10227.346000] eic_handler
<4>[10227.350000] ==work 1=
<6>[10227.358000] CY8CTST242 ===touch_point = 1
<6>[10227.358000] CY8CTST242 ===x1 = 392,y1 = 578 ====
<4>[10227.358000] x = -6, y = 66
<6>[10227.358000] mxc622x read x=-6, y=66, z=32
<6>[10227.358000] mxc622x poll interval 50
<4>[10227.362000] eic_handler
<4>[10227.362000] eic_handler
<4>[10227.362000] ==work 1=
<6>[10227.364000] CY8CTST242 ===touch_point = 1
<6>[10227.364000] CY8CTST242 ===x1 = 337,y1 = 687 ====
<4>[10227.377000] eic_handler
<4>[10227.377000] eic_handler
<4>[10227.381000] ==work 1=
<6>[10227.384000] CY8CTST242 cy8ctst242_ts_release
<4>[10227.384000] data package read error
<4>[10227.408000] x = -9, y = 64
<6>[10227.409000] mxc622x read x=-9, y=64, z=32
<6>[10227.409000] mxc622x poll interval 50
<4>[10227.468000] x = -10, y = 62
<6>[10227.468000] mxc622x read x=-10, y=62, z=32
<6>[10227.468000] mxc622x poll interval 50
<4>[10227.528000] x = -11, y = 62
<6>[10227.528000] mxc622x read x=-11, y=62, z=32
<6>[10227.528000] mxc622x poll interval 50
<4>[10227.560000] rtl8189es: probe of mmc1:0001:1 failed with error -110
<4>[10227.560000] mmc_sdio_detect:469 About to select card ca70f000
<4>[10227.561000] mmc1: !!!!! error in sending cmd:7, int:0x10000, err:-110
<4>[10227.571000] mmc1: !!!!! error in sending cmd:7, int:0x10000, err:-110
<4>[10227.581000] mmc1: !!!!! error in sending cmd:7, int:0x10000, err:-110
<4>[10227.591000] x = -13, y = 60
<6>[10227.591000] mxc622x read x=-13, y=60, z=32
<6>[10227.591000] mxc622x poll interval 50
<4>[10227.592000] mmc1: !!!!! error in sending cmd:7, int:0x10000, err:-110
<6>[10227.602000] mmc1: card 0001 removed
<4>[10227.602000] sdhci_set_power, LDO_TurnOffLDO(LDO_LDO_SDIO1)
<4>[10227.602000] SDIO1: sdhci_sprd_set_ahb_clock, set ahb clk:0
<4>[10227.602000] SDIO1: sdhci_sprd_set_ahb_clock, set ahb clk:0
<4>[10227.603000] mmc1, clock_control:0x8007
<4>[10227.640000] x = -13, y = 61
<6>[10227.640000] mxc622x read x=-13, y=61, z=32
<6>[10227.640000] mxc622x poll interval 50
<4>[10227.686000] x = -10, y = 63
<6>[10227.686000] mxc622x read x=-10, y=63, z=32
<6>[10227.686000] mxc622x poll interval 50
<4>[10227.687000] mmc_sdio_init_card: old_card (null)
<4>[10227.687000] mmc_sdio_init_card: save_rca 1
<4>[10227.689000] mmc_sdio_init_card:336 About to select card c38e8200
<4>[10227.700000] mmc1, clock_control:0x107
<6>[10227.702000] mmc1: new high speed SDIO card at address 0001
<4>[10227.704000] register rtw_netdev_ops to netdev_ops
<4>[10227.705000] Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_A_CUT_1T1R_RomVer(0)
<4>[10227.705000] RF_Type is 3!!
<4>[10227.705000] EEPROM type is E-FUSE
<4>[10227.705000] =>_CardEnable
<4>[10227.711000] SetHwReg8188ES: bMacPwrCtrlOn=1
<4>[10227.711000] <=_CardEnable
<4>[10227.711000] _ReadPROMContent: 9346CR=0x20, Boot from EFUSE, Autoload OK
<4>[10227.711000] EEPROM ID(0x70ac) is invalid!!
<4>[10227.711000] EEPROM ID=0x70ac
<4>[10227.711000] wifi mac address:
<4>[10227.711000] 00 90 42 f3 31 b8
<4>[10227.711000] ======= Path 0, Channel 0 =======
<4>[10227.711000] Index24G_CCK_Base[0][0] = 0x2d
<4>[10227.711000] Index24G_BW40_Base[0][0] = 0x2d
<4>[10227.712000] ======= Path 0, Channel 1 =======
<4>[10227.712000] Index24G_CCK_Base[0][1] = 0x2d
<4>[10227.712000] Index24G_BW40_Base[0][1] = 0x2d
<4>[10227.712000] ======= Path 0, Channel 2 =======
<4>[10227.712000] Index24G_CCK_Base[0][2] = 0x2d
<4>[10227.712000] Index24G_BW40_Base[0][2] = 0x2d
<4>[10227.712000] ======= Path 0, Channel 3 =======
<4>[10227.712000] Index24G_CCK_Base[0][3] = 0x2d
<4>[10227.712000] Index24G_BW40_Base[0][3] = 0x2d
<4>[10227.712000] ======= Path 0, Channel 4 =======
<4>[10227.712000] Index24G_CCK_Base[0][4] = 0x2d
<4>[10227.712000] Index24G_BW40_Base[0][4] = 0x2d
<4>[10227.712000] ======= Path 0, Channel 5 =======
<4>[10227.712000] Index24G_CCK_Base[0][5] = 0x2d
<4>[10227.712000] Index24G_BW40_Base[0][5] = 0x2d
<4>[10227.712000] ======= Path 0, Channel 6 =======
<4>[10227.712000] Index24G_CCK_Base[0][6] = 0x2d
<4>[10227.712000] Index24G_BW40_Base[0][6] = 0x2d
<4>[10227.712000] ======= Path 0, Channel 7 =======
<4>[10227.712000] Index24G_CCK_Base[0][7] = 0x2d
<4>[10227.712000] Index24G_BW40_Base[0][7] = 0x2d
<4>[10227.712000] ======= Path 0, Channel 8 =======
<4>[10227.712000] Index24G_CCK_Base[0][8] = 0x2d
<4>[10227.712000] Index24G_BW40_Base[0][8] = 0x2d
<4>[10227.712000] ======= Path 0, Channel 9 =======
<4>[10227.712000] Index24G_CCK_Base[0][9] = 0x2d
<4>[10227.712000] Index24G_BW40_Base[0][9] = 0x2d
<4>[10227.712000] ======= Path 0, Channel 10 =======
<4>[10227.712000] Index24G_CCK_Base[0][10] = 0x2d
<4>[10227.712000] Index24G_BW40_Base[0][10] = 0x2d
<4>[10227.713000] ======= Path 0, Channel 11 =======
<4>[10227.713000] Index24G_CCK_Base[0][11] = 0x2d
<4>[10227.713000] Index24G_BW40_Base[0][11] = 0x2d
<4>[10227.713000] ======= Path 0, Channel 12 =======
<4>[10227.713000] Index24G_CCK_Base[0][12] = 0x2d
<4>[10227.713000] Index24G_BW40_Base[0][12] = 0x2d
<4>[10227.713000] ======= Path 0, Channel 13 =======
<4>[10227.713000] Index24G_CCK_Base[0][13] = 0x2d
<4>[10227.713000] Index24G_BW40_Base[0][13] = 0x2d
<4>[10227.713000] ======= Path 0, Channel 14 =======
<4>[10227.713000] Index24G_CCK_Base[0][14] = 0x2d
<4>[10227.713000] Index24G_BW40_Base[0][14] = 0x2d
<4>[10227.713000] ======= TxCount 0 =======
<4>[10227.713000] CCK_24G_Diff[0][0]= 45
<4>[10227.713000] OFDM_24G_Diff[0][0]= 4
<4>[10227.713000] BW20_24G_Diff[0][0]= 2
<4>[10227.713000] BW40_24G_Diff[0][0]= 0
<4>[10227.713000] ======= TxCount 1 =======
<4>[10227.713000] CCK_24G_Diff[0][1]= -2
<4>[10227.713000] OFDM_24G_Diff[0][1]= -2
<4>[10227.713000] BW20_24G_Diff[0][1]= -2
<4>[10227.713000] BW40_24G_Diff[0][1]= -2
<4>[10227.713000] ======= TxCount 2 =======
<4>[10227.713000] CCK_24G_Diff[0][2]= -2
<4>[10227.713000] OFDM_24G_Diff[0][2]= -2
<4>[10227.713000] BW20_24G_Diff[0][2]= -2
<4>[10227.713000] BW40_24G_Diff[0][2]= -2
<4>[10227.713000] ======= TxCount 3 =======
<4>[10227.713000] CCK_24G_Diff[0][3]= -2
<4>[10227.713000] OFDM_24G_Diff[0][3]= -2
<4>[10227.713000] BW20_24G_Diff[0][3]= -2
<4>[10227.713000] BW40_24G_Diff[0][3]= -2
<4>[10227.713000] EEPROMRegulatory = 0x0
<4>[10227.714000] mlmepriv.ChannelPlan = 0x0a
<4>[10227.714000] CrystalCap: 0x20
<4>[10227.714000] EEPROM Customer ID: 0x 0
<4>[10227.714000] Board Type: 0x 0
<4>[10227.714000] ThermalMeter = 0x18
<4>[10227.714000] <==== ReadAdapterInfo8188ES in 0 ms
<4>[10227.715000] rtw_register_early_suspend
<4>[10227.715000] rtw_macaddr_cfg MAC Address = 00:90:42:f3:31:b8
<4>[10227.715000] bDriverStopped:0, bSurpriseRemoved:0, bup:0, hw_init_completed:0
<4>[10227.724000] start rtl8188es_xmit_thread
<4>[10227.735000] x = -10, y = 63
<6>[10227.735000] mxc622x read x=-10, y=63, z=32
<6>[10227.735000] mxc622x poll interval 50
<4>[10227.785000] x = -10, y = 63
<6>[10227.785000] mxc622x read x=-10, y=63, z=32
<6>[10227.785000] mxc622x poll interval 50
<4>[10227.808000] +871x_drv - drv_open, bup=0
<4>[10227.808000] +rtl8188es_hal_init
<4>[10227.808000] =>_InitPowerOn
<4>[10227.808000] =>_CardEnable
<4>[10227.808000] <=_CardEnable
<4>[10227.809000] <=_InitPowerOn
<4>[10227.816000] rtl8188e_FirmwareDownload: fw_ver=4 fw_subver=0 sig=0x88e1
<4>[10227.834000] x = -9, y = 64
<6>[10227.834000] mxc622x read x=-9, y=64, z=32
<6>[10227.834000] mxc622x poll interval 50
<4>[10227.866000] _FWFreeToGo: Checksum report OK! REG_MCUFWDL:0x00020004
<4>[10227.870000] _FWFreeToGo: Polling FW ready success!! REG_MCUFWDL:0x000200c6
<4>[10227.870000] HalDetectPwrDownMode(): PDN=0
<4>[10227.870000] Set RF Chip ID to RF_6052 and RF type to 1T1R.
<4>[10227.884000] x = -10, y = 63
<6>[10227.884000] mxc622x read x=-10, y=63, z=32
<6>[10227.884000] mxc622x poll interval 50
<4>[10227.934000] x = -11, y = 62
<6>[10227.934000] mxc622x read x=-11, y=62, z=32
<6>[10227.934000] mxc622x poll interval 50
<4>[10227.985000] x = -13, y = 62
<6>[10227.985000] mxc622x read x=-13, y=62, z=32
<6>[10227.985000] mxc622x poll interval 50
<4>[10228.034000] x = -11, y = 63
<6>[10228.034000] mxc622x read x=-11, y=63, z=32
<6>[10228.034000] mxc622x poll interval 50
<4>[10228.085000] x = -12, y = 62
<6>[10228.085000] mxc622x read x=-12, y=62, z=32
<6>[10228.085000] mxc622x poll interval 50
<4>[10228.115000] pDM_Odm TxPowerTrackControl = 1
<4>[10228.147000] x = -9, y = 64
<6>[10228.147000] mxc622x read x=-9, y=64, z=32
<6>[10228.147000] mxc622x poll interval 50
<4>[10228.290000] x = -12, y = 61
<6>[10228.290000] mxc622x read x=-12, y=61, z=32
<6>[10228.290000] mxc622x poll interval 50
<4>[10228.292000] DISABLE_BB_RF=0
<4>[10228.292000] IS_HARDWARE_TYPE_8188ES=1
<4>[10228.292000] -rtl8188es_hal_init
<4>[10228.292000] rtl8188es_hal_init in 480ms
<4>[10228.292000] MAC Address = 00:90:42:f3:31:b8
<4>[10228.293000] -871x_drv - drv_open, bup=1
<6>[10228.293000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<4>[10228.335000] x = -16, y = 59
<6>[10228.335000] mxc622x read x=-16, y=59, z=32
<6>[10228.335000] mxc622x poll interval 50
<4>[10228.384000] x = -14, y = 60
<6>[10228.384000] mxc622x read x=-14, y=60, z=32
<6>[10228.384000] mxc622x poll interval 50
<4>[10228.434000] x = -17, y = 58
<6>[10228.434000] mxc622x read x=-17, y=58, z=32
<6>[10228.434000] mxc622x poll interval 50
<4>[10228.484000] x = -13, y = 59
<6>[10228.484000] mxc622x read x=-13, y=59, z=32
<6>[10228.484000] mxc622x poll interval 50
<4>[10228.535000] x = -7, y = 62
<6>[10228.535000] mxc622x read x=-7, y=62, z=32
<6>[10228.535000] mxc622x poll interval 50
<4>[10228.584000] x = -5, y = 63
<6>[10228.584000] mxc622x read x=-5, y=63, z=32
<6>[10228.584000] mxc622x poll interval 50
<4>[10228.635000] x = 3, y = 67
<6>[10228.635000] mxc622x read x=3, y=67, z=32
<6>[10228.635000] mxc622x poll interval 50
<4>[10228.685000] x = 4, y = 68
<6>[10228.685000] mxc622x read x=4, y=68, z=32
<6>[10228.685000] mxc622x poll interval 50
<4>[10228.735000] x = 4, y = 68
<6>[10228.735000] mxc622x read x=4, y=68, z=32
<6>[10228.735000] mxc622x poll interval 50
<4>[10228.737000] eic_handler
<4>[10228.737000] eic_handler
<4>[10228.737000] ==work 1=
<6>[10228.739000] CY8CTST242 ===touch_point = 1
<6>[10228.739000] CY8CTST242 ===x1 = 360,y1 = 316 ====
<4>[10228.740000] store, policy->governor->name:ondemand
<4>[10228.758000] eic_handler
<4>[10228.758000] eic_handler
<4>[10228.758000] ==work 1=
<6>[10228.760000] CY8CTST242 ===touch_point = 1
<6>[10228.760000] CY8CTST242 ===x1 = 360,y1 = 323 ====
<4>[10228.763000] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
<4>[10228.763000] set_mode = IW_MODE_INFRA
<4>[10228.765000] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
<4>[10228.779000] eic_handler
<4>[10228.779000] eic_handler
<4>[10228.779000] ==work 1=
<6>[10228.782000] CY8CTST242 ===touch_point = 1
<6>[10228.782000] CY8CTST242 ===x1 = 368,y1 = 347 ====
<4>[10228.785000] x = -1, y = 66
<6>[10228.785000] mxc622x read x=-1, y=66, z=32
<6>[10228.785000] mxc622x poll interval 50
<4>[10228.801000] eic_handler
<4>[10228.801000] eic_handler
<4>[10228.802000] ==work 1=
<6>[10228.804000] CY8CTST242 ===touch_point = 1
<6>[10228.804000] CY8CTST242 ===x1 = 377,y1 = 377 ====
<4>[10228.823000] eic_handler
<4>[10228.823000] eic_handler
<4>[10228.823000] ==work 1=
<6>[10228.826000] CY8CTST242 ===touch_point = 1
<6>[10228.826000] CY8CTST242 ===x1 = 387,y1 = 410 ====
<4>[10228.839000] x = -2, y = 63
<6>[10228.839000] mxc622x read x=-2, y=63, z=32
<6>[10228.839000] mxc622x poll interval 50
<4>[10228.846000] eic_handler
<4>[10228.846000] eic_handler
<4>[10228.846000] ==work 1=
<6>[10228.848000] CY8CTST242 ===touch_point = 1
<6>[10228.848000] CY8CTST242 ===x1 = 392,y1 = 433 ====
<4>[10228.867000] eic_handler
<4>[10228.867000] eic_handler
<4>[10228.867000] ==work 1=
<6>[10228.871000] CY8CTST242 ===touch_point = 1
<6>[10228.871000] CY8CTST242 ===x1 = 393,y1 = 465 ====
<4>[10228.884000] x = 1, y = 67
<6>[10228.884000] mxc622x read x=1, y=67, z=32
<6>[10228.884000] mxc622x poll interval 50
<4>[10228.888000] eic_handler
<4>[10228.888000] eic_handler
<4>[10228.888000] ==work 1=
<6>[10228.891000] CY8CTST242 ===touch_point = 1
<6>[10228.891000] CY8CTST242 ===x1 = 394,y1 = 502 ====
<4>[10228.910000] eic_handler
<4>[10228.910000] eic_handler
<4>[10228.910000] ==work 1=
<6>[10228.912000] CY8CTST242 ===touch_point = 1
<6>[10228.913000] CY8CTST242 ===x1 = 396,y1 = 543 ====
<4>[10228.932000] eic_handler
<4>[10228.932000] eic_handler
<4>[10228.932000] ==work 1=
<6>[10228.934000] CY8CTST242 ===touch_point = 1
<6>[10228.934000] CY8CTST242 ===x1 = 396,y1 = 582 ====
<4>[10228.935000] x = -12, y = 59
<6>[10228.935000] mxc622x read x=-12, y=59, z=32
<6>[10228.935000] mxc622x poll interval 50
<4>[10228.954000] eic_handler
<4>[10228.954000] eic_handler
<4>[10228.954000] ==work 1=
<6>[10228.956000] CY8CTST242 ===touch_point = 1
<6>[10228.956000] CY8CTST242 ===x1 = 396,y1 = 607 ====
<4>[10228.978000] eic_handler
<4>[10228.978000] eic_handler
<4>[10228.978000] ==work 1=
<6>[10228.981000] CY8CTST242 ===touch_point = 1
<6>[10228.981000] CY8CTST242 ===x1 = 395,y1 = 619 ====
<4>[10228.985000] x = -5, y = 64
<6>[10228.985000] mxc622x read x=-5, y=64, z=32
<6>[10228.985000] mxc622x poll interval 50
<4>[10229.004000] eic_handler
<4>[10229.004000] eic_handler
<4>[10229.005000] ==work 1=
<6>[10229.007000] CY8CTST242 ===touch_point = 1
<6>[10229.007000] CY8CTST242 ===x1 = 394,y1 = 625 ====
<4>[10229.028000] eic_handler
<4>[10229.028000] eic_handler
<4>[10229.028000] ==work 1=
<6>[10229.031000] CY8CTST242 ===touch_point = 1
<6>[10229.031000] CY8CTST242 ===x1 = 394,y1 = 644 ====
<4>[10229.034000] x = -17, y = 60
<6>[10229.034000] mxc622x read x=-17, y=60, z=32
<6>[10229.034000] mxc622x poll interval 50
<4>[10229.052000] eic_handler
<4>[10229.052000] eic_handler
<4>[10229.052000] ==work 1=
<6>[10229.054000] CY8CTST242 ===touch_point = 1
<6>[10229.055000] CY8CTST242 ===x1 = 395,y1 = 660 ====
<4>[10229.073000] eic_handler
<4>[10229.073000] eic_handler
<4>[10229.073000] ==work 1=
<6>[10229.076000] CY8CTST242 ===touch_point = 1
<6>[10229.076000] CY8CTST242 ===x1 = 400,y1 = 687 ====
<4>[10229.084000] x = -12, y = 60
<6>[10229.085000] mxc622x read x=-12, y=60, z=32
<6>[10229.085000] mxc622x poll interval 50
<4>[10229.093000] eic_handler
<4>[10229.093000] eic_handler
<4>[10229.093000] ==work 1=
<6>[10229.096000] CY8CTST242 ===touch_point = 1
<6>[10229.096000] CY8CTST242 ===x1 = 403,y1 = 723 ====
<4>[10229.110000] eic_handler
<4>[10229.110000] eic_handler
<4>[10229.110000] ==work 1=
<6>[10229.113000] CY8CTST242 ===touch_point = 1
<6>[10229.113000] CY8CTST242 ===x1 = 429,y1 = 759 ====
<4>[10229.125000] eic_handler
<4>[10229.125000] eic_handler
<4>[10229.125000] ==work 1=
<6>[10229.128000] CY8CTST242 cy8ctst242_ts_release
<4>[10229.128000] data package read error
<4>[10229.137000] x = -10, y = 63
<6>[10229.137000] mxc622x read x=-10, y=63, z=32
<6>[10229.137000] mxc622x poll interval 50
<4>[10229.185000] x = -21, y = 55
<6>[10229.185000] mxc622x read x=-21, y=55, z=32
<6>[10229.185000] mxc622x poll interval 50
<4>[10229.234000] x = -24, y = 55
<6>[10229.234000] mxc622x read x=-24, y=55, z=32
<6>[10229.235000] mxc622x poll interval 50
<4>[10229.285000] x = -19, y = 59
<6>[10229.285000] mxc622x read x=-19, y=59, z=32
<6>[10229.285000] mxc622x poll interval 50
<4>[10229.342000] x = -20, y = 58
<6>[10229.342000] mxc622x read x=-20, y=58, z=32
<6>[10229.342000] mxc622x poll interval 50
<4>[10229.384000] x = -17, y = 60
<6>[10229.384000] mxc622x read x=-17, y=60, z=32
<6>[10229.384000] mxc622x poll interval 50
<4>[10229.435000] x = -16, y = 61
<6>[10229.435000] mxc622x read x=-16, y=61, z=32
<6>[10229.435000] mxc622x poll interval 50
<4>[10229.485000] x = -19, y = 59
<6>[10229.485000] mxc622x read x=-19, y=59, z=32
<6>[10229.485000] mxc622x poll interval 50
<4>[10229.534000] x = -17, y = 61
<6>[10229.534000] mxc622x read x=-17, y=61, z=32
<6>[10229.534000] mxc622x poll interval 50
<4>[10229.585000] x = -13, y = 63
<6>[10229.585000] mxc622x read x=-13, y=63, z=32
<6>[10229.585000] mxc622x poll interval 50
<4>[10229.635000] x = -14, y = 61
<6>[10229.635000] mxc622x read x=-14, y=61, z=32
<6>[10229.635000] mxc622x poll interval 50
<4>[10229.688000] x = -8, y = 64
<6>[10229.688000] mxc622x read x=-8, y=64, z=32
<6>[10229.688000] mxc622x poll interval 50
<4>[10229.735000] x = -5, y = 67
<6>[10229.735000] mxc622x read x=-5, y=67, z=32
<6>[10229.735000] mxc622x poll interval 50
<4>[10229.735000] eic_handler
<4>[10229.735000] eic_handler
<4>[10229.735000] ==work 1=
<6>[10229.738000] CY8CTST242 ===touch_point = 1
<6>[10229.738000] CY8CTST242 ===x1 = 289,y1 = 745 ====
<4>[10229.756000] eic_handler
<4>[10229.756000] eic_handler
<4>[10229.756000] ==work 1=
<6>[10229.759000] CY8CTST242 ===touch_point = 1
<6>[10229.759000] CY8CTST242 ===x1 = 289,y1 = 745 ====
<4>[10229.759000] store, policy->governor->name:ondemand
<4>[10229.784000] x = -6, y = 67
<6>[10229.784000] mxc622x read x=-6, y=67, z=32
<6>[10229.784000] mxc622x poll interval 50
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=MocorDroid2.3.5
ro.build.display.id=MocorDroid2.3.5.W12.20_P20.01
ro.build.version.incremental=W12.20_P20.01
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=4.1.1
ro.build.date=2013年 06月 15日 星期六 10:44:07 CST
ro.build.date.utc=1371264247
ro.build.type=user
ro.build.user=kw
ro.build.host=chengwh
ro.build.tags=test-keys
ro.product.model=X920e
ro.product.brand=X920e
ro.product.name=sprdroid_base
ro.product.device=hsdroid
ro.product.board=project_kw_d8_dx_fl
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=sprd
ro.wifi.channels=
ro.board.platform=sprdbp
# ro.build.product is obsolete; use ro.product.device
ro.build.product=hsdroid
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=sprdroid_base-user 4.1.1 MocorDroid2.3.5 W12.20_P20.01 test-keys
ro.build.fingerprint=X920e/sprdroid_base/hsdroid:4.1.1/MocorDroid2.3.5/W12.20_P20.01:user/test-keys
persist.sys.timezone=Asia/Shanghai
ro.product.carrier=
ro.product.locale.language=en
ro.product.locale.region=US
ro.msms.phone_count=2sim
ro.build.umclient.category=szkeweis
ro.build.umclient.display.id=D8_DX_V1
# end build properties
#
# system.prop for hsdroid
#
#rild.libpath=/system/lib/libsp_ril.so
#wifi.interface = tiwlan0
# Time between scans in seconds. Keep it high to minimize battery drain.
# This only affects the case in which there are remembered access points,
# but none are in range.
wifi.supplicant_scan_interval = 48
android.keylayout.sprd-keypad = /system/usr/keylayout/sprd-keypad.kl
android.keychar.sprd-keypad = /system/usr/keychars/sprd-keypad.kcm
ro.hardware =sphs
# Default network type
# 2 => AUTO Preferred.
ro.telephony.default_network = 2
# 1 => add volume control in in-call screen
ro.sprd.volume_control_icon = 1
ro.sf.lcd_density = 240
ro.sf.hwrotation=180
ro.sf.lcd_width = 45
ro.sf.lcd_height = 75
ro.floatkey.show = true
dalvik.vm.heapsize=32m
ro.opengles.version=131072
#
# ADDITIONAL_BUILD_PROPERTIES
#
persist.sys.language=en
persist.sys.country=US
ro.com.android.dateformat=dd-MM-yyyy
ro.com.android.dataroaming=true
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
#
# Added by Android Tuner
#
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
8189es 652864 0 - Live 0xbf14f000
cy8ctst242_ts 7656 0 - Live 0xbf089000
snd_dummy 9403 0 - Live 0xbf080000
mxc622x 10032 1 - Live 0xbf077000
mali 260514 2 - Live 0xbf026000
ump 54045 15 mali, Live 0xbf010000
kt0812g_fm_ctrl 14927 0 - Live 0xbf006000
headset 3505 0 - Live 0xbf000000
RAM: 256 MB (240 MB available)
System RAM: 1.238MB
System RAM: 238.242MB
Flash: 16 GB (14.817 GB actual); 0.5 GB (0.447 GB actual)
mmcblk0: 14.817 GB
mtdblock: 0.046 GB
mtdblock1: 0.447 GB
Touch Screen for sprd X920e
$99.51 Mod Sub Style Silver Gold Rosegold Polished Stainless Steel Watch Bezel For Seiko SKX007 New SPRD Men's Machinery Diving Watch
$4.5 SPRD Power ic SC2720A SC2342A SC2342B SC2341B SC2721G SC2723G2 SC2712A SC2712B SC2712E
$81.84 Special Modified Watch Needle C3 Green Luminous Watch Hands Fit Japan NH35A NH36A 7S 6R 4R For SKX007 SKX009 SPRD SPRE Tuna
$23.78 Dia 2.5mm Fat Spring Bar Fits Seiko SKX007 SPRD Watch Bracelets Repair Tip Size 1.0mm Heavy Duty 20mm 22mm Strap Link Pins
$2 SPRD Power ic SC2720A SC2721G SC2731G1 SC2712A SC2712B SC2712E
$28 [19]Flat 31.5*3.5mm Sapphire crystal For SEIKO SKX007 NEW SPRD MOD Watch glass AR blue Replacement parts
$80.18 28.5mm Watch Dial NH35 NH36 Green Luminous Dial fits Seiko SKX007 SPRD 6105 Tuna Samurai SPB185 Watch Case NH35 NH36 Watch Dials
$44.47 30.5mm Chapter Ring SKX007 Inner Ring fit For Seiko SKX007 SPRD Watch Case Gold/Silver/Rose Ring Diving Watch Case Ring
$48.2 SKX007 NH35 Watch Hands Fit NH36 NH35 Movement C3 Green Luminous Watch Hands for Seiko SKX007 SKX009 SPRD Men's Watches Repair
$35 Luminous Watch Hands NH35 Hands Fits Seiko SKX007 SKX009 SPRD Watch for NH36 NH36 4R35 7S Movement Men Watch Case Parts
$80.52 Watch Hands Fit Japan NH35A NH36A 7S 6R 4R With C3 Green Luminous For SKX007 SKX009 SPRD SPRE Tuna Canned Diving Turtle Watch
$28.87 30.5mm SKX007 Plastic Chapter Ring fits SKX007 SKX009 SPRD Watch Case NH35 Case Inner Ring Men's Diving watch parts
$53.35 Mod 30.5mm SKX007 Copper Chapter Ring fits Seiko SKX007 SKX009 SPRD Watch Case NH35 Case Inner Ring Men's Diving watch parts
$143.13 NH35 NH36 Dial Green Luminous Watch Dial Fit for SKX007 SPRD 6105 Turtle Tuna Watch Case 28.5mm Watch Dials With Box Gifts Parts
$14.5 22mm Diving Strap Steel Strap Watch Strap Replacement Accessories For Seiko No. 5 SKX007 SPRD series
$14.5 28.5mm Blue / Green Luminous Watch Dial Super bright calendar Parts For Seiko Skx007 Skx009 SPRD Fit Movement NH35A NH36A 4R, 6R
$73.36 Seiko mod Watch Crown nh35 crown Engraved Signed 'S' Mod for Seiko SKX007 SKX009 SKX013 SPRD for 7s26 4R36 nh36 nh35 Movement
$19 Stainless Steel Watch Strap 22mm Curved Solid End Links For Seiko SKX007/SPRD Watch Bracelet Oyster Brushed Finish With tools
$10 Black Watch Dial Parts Are Suitable for Seiko Skx007 Skx009 SPRD Fit sports NH35A NH36A 4R, 6R
Replacement Battery for sprd X920e
$99.51 Mod Sub Style Silver Gold Rosegold Polished Stainless Steel Watch Bezel For Seiko SKX007 New SPRD Men's Machinery Diving Watch
$81.84 Special Modified Watch Needle C3 Green Luminous Watch Hands Fit Japan NH35A NH36A 7S 6R 4R For SKX007 SKX009 SPRD SPRE Tuna
$23.78 Dia 2.5mm Fat Spring Bar Fits Seiko SKX007 SPRD Watch Bracelets Repair Tip Size 1.0mm Heavy Duty 20mm 22mm Strap Link Pins
$2 SPRD Power ic SC2720A SC2721G SC2731G1 SC2712A SC2712B SC2712E
$4.5 SPRD Power ic SC2720A SC2342A SC2342B SC2341B SC2721G SC2723G2 SC2712A SC2712B SC2712E
$28 [19]Flat 31.5*3.5mm Sapphire crystal For SEIKO SKX007 NEW SPRD MOD Watch glass AR blue Replacement parts
$80.18 28.5mm Watch Dial NH35 NH36 Green Luminous Dial fits Seiko SKX007 SPRD 6105 Tuna Samurai SPB185 Watch Case NH35 NH36 Watch Dials
$44.47 30.5mm Chapter Ring SKX007 Inner Ring fit For Seiko SKX007 SPRD Watch Case Gold/Silver/Rose Ring Diving Watch Case Ring
$48.2 SKX007 NH35 Watch Hands Fit NH36 NH35 Movement C3 Green Luminous Watch Hands for Seiko SKX007 SKX009 SPRD Men's Watches Repair
$35 Luminous Watch Hands NH35 Hands Fits Seiko SKX007 SKX009 SPRD Watch for NH36 NH36 4R35 7S Movement Men Watch Case Parts
$80.52 Watch Hands Fit Japan NH35A NH36A 7S 6R 4R With C3 Green Luminous For SKX007 SKX009 SPRD SPRE Tuna Canned Diving Turtle Watch
$28.87 30.5mm SKX007 Plastic Chapter Ring fits SKX007 SKX009 SPRD Watch Case NH35 Case Inner Ring Men's Diving watch parts
$53.35 Mod 30.5mm SKX007 Copper Chapter Ring fits Seiko SKX007 SKX009 SPRD Watch Case NH35 Case Inner Ring Men's Diving watch parts
$10 Black Watch Dial Parts Are Suitable for Seiko Skx007 Skx009 SPRD Fit sports NH35A NH36A 4R, 6R
$19 Stainless Steel Watch Strap 22mm Curved Solid End Links For Seiko SKX007/SPRD Watch Bracelet Oyster Brushed Finish With tools
$73.36 Seiko mod Watch Crown nh35 crown Engraved Signed 'S' Mod for Seiko SKX007 SKX009 SKX013 SPRD for 7s26 4R36 nh36 nh35 Movement
$14.5 28.5mm Blue / Green Luminous Watch Dial Super bright calendar Parts For Seiko Skx007 Skx009 SPRD Fit Movement NH35A NH36A 4R, 6R
$143.13 NH35 NH36 Dial Green Luminous Watch Dial Fit for SKX007 SPRD 6105 Turtle Tuna Watch Case 28.5mm Watch Dials With Box Gifts Parts
$14.5 22mm Diving Strap Steel Strap Watch Strap Replacement Accessories For Seiko No. 5 SKX007 SPRD series
Cover Cases for sprd X920e
$99.51 Mod Sub Style Silver Gold Rosegold Polished Stainless Steel Watch Bezel For Seiko SKX007 New SPRD Men's Machinery Diving Watch
$23.78 Dia 2.5mm Fat Spring Bar Fits Seiko SKX007 SPRD Watch Bracelets Repair Tip Size 1.0mm Heavy Duty 20mm 22mm Strap Link Pins
$28 [19]Flat 31.5*3.5mm Sapphire crystal For SEIKO SKX007 NEW SPRD MOD Watch glass AR blue Replacement parts
$2 SPRD Power ic SC2720A SC2721G SC2731G1 SC2712A SC2712B SC2712E
$81.84 Special Modified Watch Needle C3 Green Luminous Watch Hands Fit Japan NH35A NH36A 7S 6R 4R For SKX007 SKX009 SPRD SPRE Tuna
$4.5 SPRD Power ic SC2720A SC2342A SC2342B SC2341B SC2721G SC2723G2 SC2712A SC2712B SC2712E
$80.18 28.5mm Watch Dial NH35 NH36 Green Luminous Dial fits Seiko SKX007 SPRD 6105 Tuna Samurai SPB185 Watch Case NH35 NH36 Watch Dials
$44.47 30.5mm Chapter Ring SKX007 Inner Ring fit For Seiko SKX007 SPRD Watch Case Gold/Silver/Rose Ring Diving Watch Case Ring
$48.2 SKX007 NH35 Watch Hands Fit NH36 NH35 Movement C3 Green Luminous Watch Hands for Seiko SKX007 SKX009 SPRD Men's Watches Repair
$35 Luminous Watch Hands NH35 Hands Fits Seiko SKX007 SKX009 SPRD Watch for NH36 NH36 4R35 7S Movement Men Watch Case Parts
$80.52 Watch Hands Fit Japan NH35A NH36A 7S 6R 4R With C3 Green Luminous For SKX007 SKX009 SPRD SPRE Tuna Canned Diving Turtle Watch
$28.87 30.5mm SKX007 Plastic Chapter Ring fits SKX007 SKX009 SPRD Watch Case NH35 Case Inner Ring Men's Diving watch parts
$53.35 Mod 30.5mm SKX007 Copper Chapter Ring fits Seiko SKX007 SKX009 SPRD Watch Case NH35 Case Inner Ring Men's Diving watch parts
$143.13 NH35 NH36 Dial Green Luminous Watch Dial Fit for SKX007 SPRD 6105 Turtle Tuna Watch Case 28.5mm Watch Dials With Box Gifts Parts
$19 Stainless Steel Watch Strap 22mm Curved Solid End Links For Seiko SKX007/SPRD Watch Bracelet Oyster Brushed Finish With tools
$14.5 28.5mm Blue / Green Luminous Watch Dial Super bright calendar Parts For Seiko Skx007 Skx009 SPRD Fit Movement NH35A NH36A 4R, 6R
$14.5 22mm Diving Strap Steel Strap Watch Strap Replacement Accessories For Seiko No. 5 SKX007 SPRD series
$73.36 Seiko mod Watch Crown nh35 crown Engraved Signed 'S' Mod for Seiko SKX007 SKX009 SKX013 SPRD for 7s26 4R36 nh36 nh35 Movement
$10 Black Watch Dial Parts Are Suitable for Seiko Skx007 Skx009 SPRD Fit sports NH35A NH36A 4R, 6R
| Find Similar devices | |
|---|---|
| Same CPU: | |
| Same Display resolution: | |
| Same ro.build.description: | |
