ZTE tmn smart a18 Спецификация

Как разместить здесь свою спецификацию:

1. Установить SpecDevice
2. Запустить, сформируется спецификация
3. Скопировать ссылку (подробнее...)

Характеристики
Параметры ОС
cpuinfo
Расширения OpenGL
WiFi dmesg
build.prop
Модули
Память

Основные характеристики
Производитель	ZTE
Модель	tmn smart a18
Версия Andriod	4.0.4; eng.zte.20121213.133412; SDK15
Процессор	2 cores; ARMv7 Processor rev 0 (v7l); Max: 1001,0 MHz; Min: 250,2 MHz
Дисплей	960 x 540; DPI: 240; Evaluated Size: 4,6"
Сенсорный экран	NOT multitouch 1 point
Графический ускоритель	PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.8@861574
ОЗУ	1024 MB (997 MB available)
Память	4 GB (3.589 GB actual); 32 GB (31.250 GB actual) (см. вкладку "Память")
Связь
Телефон	GSM; Net: EDGE
WiFi	wlan; IEEE 802.11 a/b/g/n; MediaTek MT6620; AP Mode
USB Host	No
Bluetooth	Bluetooth 4.0+HS
GPS	No
Установленные компоненты
Главная камера	Photo: 4.9 MP; Max: 2560x1920; Focus: auto continuous-picture continuous-video macro infinity manual fullscan; Flash modes: auto on off torch
Доп. камера	No
Датчики	bma222 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA;
	tmd2771 Proximity Sensor (Capella); range: 0...1; resolution: 1 (100%); power: 0,13mA;
	tmd2771 Light Sensor (Capella); range: 0...10240; resolution: 1 (0,01%); power: 0,13mA;
Вибратор	Yes
Языки	44; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Tagalog; Turkish; Ukrainian; Urdu; Vietnamese; Chinese
Аккумулятор	Technology: Li-ion; Voltage: 4123
FM radio	76 to 108MHz
SD Version:	1.1 5

KERNEL: Linux version 3.0.13 (zte@SW219) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Fri Jun 28 15:44:11 CST 2013
CODENAME: REL
Mainboard: ztenj77_cu_ics
BRAND: ZTE
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: P175A20
DISPLAY: TMN-PT-QB18S-P175A20V1.0.4
FINGERPRINT: ZTE/P175A20/P175A20:4.0.4/IMM76D/20121213.133412:user/release-keys
HARDWARE: mt6577
ID: IMM76D
TAGS: release-keys

Processor : ARMv7 Processor rev 0 (v7l)
processor : 0
BogoMIPS : 1552.38
processor : 1
BogoMIPS : 1557.84
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc09
CPU revision : 0
Hardware : MT6577
Revision : 65fb8a00
Serial : 0000000000000000

GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture

<7>[122548.883493] (1)[16117:DhcpStateMachin] exit
<4>[122548.932621] (0)[STP-PSM] [I]_stp_psm_do_wait: STP is waiting state for ACT, i=1
<6>[122548.932665] (0)[WMT-DFT][I]hif_sdio_wifi_off:start!
<7>[122548.932722] (0)[13222:tx_thread] exit
<6>[122548.973915] (0)[RTlog delete] fib_netdev_event() wlan0 NETDEV_DOWN!
<7>[122548.982776] (1)[280:CallbackHandler] fork [17009:CallbackHandler]
<7>[122548.986590] (0)[17009:CallbackHandler] set proc[17009] name: ->[Thread-1038]
<7>[122548.987369] (0)[17009:Thread-1038] exit
<7>[122548.999516] (0)WQ_WARN: cpu:4, proc:kworker/u:4, dur: 10349769 > 8ms
<7>[122548.999557] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[122549.003242] (0)[16151:Smack Packet Re] exit
<7>[122549.032719] (0)WQ_WARN: cpu:4, proc:kworker/u:4, dur: 26814385 > 8ms
<7>[122549.032761] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[122549.041632] (0)[17008:dmesg] exit
<7>[122549.042102] (0)[17008:dmesg] sig 17 to [17001:AsyncTask #2]
<6>[122549.048349] (0)[WMT-DFT][I]hif_sdio_wifi_off:ok!
<7>[122549.048393] (0)[13217:ksdioirqd/mmc2] exit
<6>[122549.049320] (0)[WMT-DFT][I]hif_sdio_wifi_off:sdio_release_irq() for wifi ok
<4>[122549.049346] (0)mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[122549.049358] (0)mtk_wcn_cmb_sdio_off (3)
<3>[122549.049373] (0)msdc3 -> USR Suspend <- msdc_pm() : L<1544> PID<0x52>
<6>[122549.049465] (0)[WMT-DFT][I]hif_sdio_remove:start!
<6>[122549.049787] (0)[WMT-DFT][I]hif_sdio_remove:sdio func(0xdc4ae400) is removed successfully!
<6>[122549.049936] (0)mmc2: card 0001 removed
<3>[122549.051061] (0)msdc3 -> save latch data<1> cmd<1> <- msdc_ops_set_ios() : L<3966> PID<0x52>
<3>[122549.051081] (0)msdc3 -> set mclk to 0 <- msdc_set_mclk() : L<896> PID<0x52>
<3>[122549.051321] (0)[WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC OFF]status(b:2 f:0 g:0 w:0 lpbk:0 coredump:0 wmt:2 sd1:0 sd2:0 stp:0)
<4>[122549.051383] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<3>[122549.051416] (0)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(4) type(3) ok
<4>[122549.051959] (0)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<7>[122549.064882] (0)WQ_WARN: cpu:4, proc:kworker/u:1, dur: 22828154 > 8ms
<7>[122549.064922] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[122549.069555] (0)[17005:unloadDriverThr] exit
<7>[122549.115028] (0)WQ_WARN: cpu:4, proc:kworker/u:1, dur: 24973615 > 8ms
<7>[122549.115059] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[122549.120797] (0)[290:WifiStateMachin] fork [17010:WifiStateMachin]
<7>[122549.120859] (1)[17010:WifiStateMachin] set proc[17010] name: ->[loadDriverThrea]
<7>[122549.140459] (1)[243:er.ServerThread] fork [17011:er.ServerThread]
<6>[122549.143939] (0)[WLAN] rfkill_set_block(blocked 0)
<6>[122549.143952] (0)[WLAN] Power on
<3>[122549.143969] (0)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<4>[122549.143996] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<4>[122549.144041] (0)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<4>[122549.144071] (0)mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[122549.144080] (0)board_sdio_ctrl force off before on
<6>[122549.144089] (0)mtk_wcn_cmb_sdio_off (3)
<6>[122549.144138] (0)mtk_wcn_cmb_sdio_on (3)
<3>[122549.144255] (0)msdc3 -> USR Resume <- msdc_pm() : L<1569> PID<0x52>
<7>[122549.145503] (0)[17011:er.ServerThread] set proc[17011] name: ->[Thread-1040]
<7>[122549.147078] (0)[17011:Thread-1040] exit
<7>[122549.148722] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 9249000 > 8ms
<7>[122549.148758] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<3>[122549.162862] (1)msdc3 -> ================ <- msdc_set_mclk() : L<944> PID<0x405a>
<3>[122549.162890] (1)msdc3 -> !!! Set<400KHz> Source<197000KHz> -> sclk<397KHz> DDR<0> mode<0> div<124> <- msdc_set_mclk() : L<946> PID<0x405a>
<3>[122549.162907] (1)msdc3 -> ================ <- msdc_set_mclk() : L<947> PID<0x405a>
<3>[122549.189492] (0)msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1637> PID<0x405a>
<3>[122549.211155] (0)msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<3949> PID<0x405a>
<3>[122549.211194] (0)msdc3 -> ================ <- msdc_set_mclk() : L<944> PID<0x405a>
<3>[122549.211212] (0)msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<946> PID<0x405a>
<3>[122549.211228] (0)msdc3 -> ================ <- msdc_set_mclk() : L<947> PID<0x405a>
<6>[122549.212443] (0)mmc2: new high speed SDIO card at address 0001
<6>[122549.214272] (0)[WMT-DFT][I]hif_sdio_probe:start!
<6>[122549.214294] (0)[WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x20a) num(0x1)
<6>[122549.214315] (0)[WMT-DFT][I]hif_sdio_probe:card->info[0]: MediaTek MT6620 Wireless Combo Chip
<6>[122549.214336] (0)[WMT-DFT][I]hif_sdio_probe:card->info[1]:
<6>[122549.214353] (0)[WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[122549.214527] (0)[WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(524288)
<7>[122549.214565] (0)WQ_WARN: cpu:4, proc:kworker/u:1, dur: 68721153 > 8ms
<7>[122549.214587] (0)work: mmc_rescan+0x0/0x2dc
<7>[122549.215523] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 21121231 > 8ms
<7>[122549.215565] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[122549.232314] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 12068692 > 8ms
<7>[122549.232355] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[122549.282530] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 23086769 > 8ms
<7>[122549.282602] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[122549.299274] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 10294231 > 8ms
<7>[122549.299309] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<6>[122549.302612] (0)[WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[122549.302959] (0)[2:kthreadd] fork [17012:kthreadd]
<6>[122549.303071] (0)[WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<4>[122549.303123] (1)[RT_MONITOR]WARNNING [17012:ksdioirqd/mmc2] SET NOT ALLOW RT Prio [1] for proc [17012:ksdioirqd/mmc2]
<4>[122549.303163] (1)Backtrace:
<4>[122549.303252] (1)[] (dump_backtrace+0x0/0x10c) from [] (dump_stack+0x18/0x1c)
<4>[122549.303291] (1) r7:dc636000 r6:00000001 r5:00000000 r4:cadc7000
<4>[122549.303385] (1)[] (dump_stack+0x0/0x1c) from [] (__sched_setscheduler+0x454/0x4d8)
<4>[122549.303448] (1)[] (__sched_setscheduler+0x0/0x4d8) from [] (sched_setscheduler+0x14/0x18)
<4>[122549.303511] (1)[] (sched_setscheduler+0x0/0x18) from [] (sdio_irq_thread+0x38/0x2dc)
<4>[122549.303571] (1)[] (sdio_irq_thread+0x0/0x2dc) from [] (kthread+0x90/0x98)
<4>[122549.303639] (1)[] (kthread+0x0/0x98) from [] (do_exit+0x0/0x6bc)
<4>[122549.303673] (1) r7:00000013 r6:c009f208 r5:c00b6aac r4:dce97d44
<7>[122549.332895] (1)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 8990461 > 8ms
<7>[122549.332988] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[122549.349544] (1)WQ_WARN: cpu:4, proc:kworker/u:1, dur: 10519692 > 8ms
<7>[122549.349611] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[122549.366285] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 11373231 > 8ms
<7>[122549.366317] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[122549.383040] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 10491230 > 8ms
<7>[122549.383074] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[122549.399803] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 10363000 > 8ms
<7>[122549.399838] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[122549.416555] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 10473153 > 8ms
<7>[122549.416586] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<4>[122549.432902] (0)mtk-tpd: tpd_esd_check_func++
<7>[122549.433315] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 10896616 > 8ms
<7>[122549.433347] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[122549.450068] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 11696385 > 8ms
<7>[122549.450099] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[122549.466828] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 10424385 > 8ms
<7>[122549.466861] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[122549.483582] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 10488231 > 8ms
<7>[122549.483618] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[122549.500346] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 10408384 > 8ms
<7>[122549.500376] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[122549.517096] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 10836077 > 8ms
<7>[122549.517130] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[122549.533840] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 11505615 > 8ms
<7>[122549.533869] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[122549.550588] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 10423000 > 8ms
<7>[122549.550619] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[122549.561994] (1)[16993:Thread-978] exit
<7>[122549.567367] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 10871384 > 8ms
<7>[122549.567399] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[122549.572328] (0)[16998:Thread-980] exit
<7>[122549.584094] (1)WQ_WARN: cpu:4, proc:kworker/u:1, dur: 11768153 > 8ms
<7>[122549.584161] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[122549.600846] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 12254923 > 8ms
<7>[122549.600875] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[122549.943186] (0)WQ_WARN: cpu:0, proc:kworker/0:3, dur: 310590000 > 8ms
<7>[122549.943209] (0)work: thermal_zone_device_check+0x0/0x18
<3>[122550.252716] (0)[WMT-DEV][I]wmt_dev_tra_sdio_poll:**poll_during_time = 19210 > 3000, sdio_during_count = 2380 > 200, query
<3>[122550.252779] (0)[WMT-DEV][I]wmt_dev_tm_temp_query:sdio traffic , we must query temperature..
<7>[122550.388642] (0)[2:kthreadd] fork [17013:kthreadd]
<6>[122550.414950] (1)[WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(20a) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[122550.414968] (1)[WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[122550.414996] (1)[WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:2 f:0 g:0 w:2 lpbk:0 coredump:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[122550.415087] (1)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<3>[122550.415134] (1)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<4>[122550.415806] (0)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<4>[122550.415843] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<4>[122550.416229] (0)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<7>[122550.416939] (0)[17010:loadDriverThrea] exit
<4>[122550.417607] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<4>[122550.417638] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<4>[122550.417665] (0)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<4>[122550.418376] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<4>[122550.418408] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<4>[122550.418432] (0)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<4>[122550.419339] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<3>[122550.419367] (0)[WMT-DEV][I]wmt_dev_tm_temp_query:[Thermal] current_temp = 36
<7>[122550.419392] (0)WQ_WARN: cpu:0, proc:kworker/0:3, dur: 166719000 > 8ms
<7>[122550.419413] (0)work: thermal_zone_device_check+0x0/0x18
<4>[122550.419434] (0)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<7>[122550.423692] (0)[16474:kworker/u:1] fork [17014:kworker/u:1]
<7>[122550.423760] (1)[17014:kworker/u:1] fork [17015:kworker/u:1]
<7>[122550.423791] (0)[17015:kworker/u:1] exit
<7>[122550.423824] (0)[17015:kworker/u:1] sig 17 to [17014:kworker/u:1]
<7>[122550.423866] (0)[17014:kworker/u:1] exit
<6>[122550.424388] (1)[RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[122550.424412] (1)ADDRCONF(NETDEV_UP): wlan0: link is not ready
<5>[122550.443195] (0)init: starting `wpa_supplicant`
<7>[122550.443486] (0)[1:init] fork [17016:init]
<7>[122550.444254] (1)WQ_WARN: cpu:1, proc:kworker/1:1, dur: 19764769 > 8ms
<7>[122550.444360] (1)work: wlanSetMulticastListWorkQueue+0x0/0x1f4 [wlan]
<7>[122550.444464] (0)[17016:init] set proc[17016] name: ->[logwrapper]
<7>[122550.446739] (0)[17016:logwrapper] fork [17017:logwrapper]
<7>[122550.447408] (0)[17017:logwrapper] set proc[17017] name: ->[wpa_supplicant]
<7>[122550.544052] (0)[290:WifiStateMachin] fork [17018:WifiStateMachin]
<7>[122550.544214] (0)[17018:WifiStateMachin] set proc[17018] name: ->[WifiMonitor]
<7>[122551.228218] (1)[17001:AsyncTask #2] fork [17019:AsyncTask #2]
<7>[122551.238875] (1)[17019:AsyncTask #2] set proc[17019] name: ->[dmesg]

# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IMM76D
ro.build.display.id=TMN-PT-QB18S-P175A20V1.0.4
ro.build.version.incremental=eng.zte.20121213.133412
ro.custom.build.version=B03
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=Thu Dec 13 13:37:14 CST 2012
ro.build.date.utc=1355377034
ro.build.type=user
ro.build.user=zte
ro.build.host=SW219
ro.build.tags=release-keys
ro.product.model=tmn smart a18
ro.product.brand=ZTE
ro.product.name=P175A20
ro.product.device=P175A20
ro.product.board=ztenj77_cu_ics
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=ZTE
ro.product.locale.language=pt
ro.product.locale.region=PT
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=mt6577_phone
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=mt6577_phone-user 4.0.4 IMM76D eng.zte.20121213.133412 release-keys
ro.build.fingerprint=ZTE/P175A20/P175A20:4.0.4/IMM76D/20121213.133412:user/release-keys
ro.build.flavor=
ro.build.characteristics=default
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=TMN-PT-QB18S-P175A20V1.0.4
ro.mediatek.platform=MT6577
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.ICS2.6577.SP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=128m
# Encrypt phone function
ro.crypto.tmpfs_options=mode=0771,uid=1000,gid=1000
ro.crypto.fs_type=ext4
ro.crypto.fs_real_blkdev=/emmc@usrdata
ro.crypto.fs_mnt_point=/data
ro.crypto.fs_options=noauto_da_alloc
ro.crypto.fs_flags=0x00000406
# USB MTP WHQL
ro.sys.usb.mtp.whql.enable=0
# Power off opt in IPO
sys.ipo.pwrdncap=2
ro.sys.usb.storage.type=mtp,mass_storage
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.sf.hwrotation=0
ril.current.share_modem=1
launcherplus.allappsgrid=2d
launcher2.allappsgrid=3d_20
curlockscreen=2
ro.mediatek.gemini_support=false
persist.radio.fd.counter=20
persist.radio.fd.off.counter=20
drm.service.enabled=true
fmradio.driver.enable=1
dalvik.vm.mtk-stack-trace-file=/data/anr/mtk_traces.txt
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.config.ringtone=TMN_VAMOS_LA.mp3
ro.setupwizard.mode=ENABLED
ro.com.google.gmsversion=4.0_r7
ro.com.google.clientidbase=android-zte
ro.com.google.clientidbase.ms=android-zte
ro.com.google.clientidbase.yt=android-zte
ro.com.google.clientidbase.am=android-zte
ro.com.google.clientidbase.gmm=android-zte
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt

wlan 286024 0 - Live 0xbf1f0000 (P)
cfg80211 121244 0 - Live 0xbf1c7000
mtk_fm_priv 8917 0 - Live 0xbf1c1000 (P)
mt6620_fm_drv 111218 1 mtk_fm_priv, Live 0xbf199000
mtk_stp_bt 39862 1 - Live 0xbf18c000
mtk_stp_gps 37318 0 - Live 0xbf17f000
mtk_stp_uart 21601 1 - Live 0xbf176000 (P)
mtk_stp_wmt 374476 7 wlan,mtk_fm_priv,mt6620_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf10c000 (P)
mtk_hif_sdio 18777 2 wlan,mtk_stp_wmt, Live 0xbf103000
devinfo 840 0 - Live 0xbf0ff000 (P)
devapc 4557 0 - Live 0xbf0fa000 (P)
sec 90381 0 - Live 0xbf0dd000 (P)
vcodec_kernel_driver 28266 2 - Live 0xbf0d1000 (P)
m4u 112266 10 - Live 0xbf0ac000 (P)
ccmni 17046 0 - Live 0xbf0a3000 (P)
ccci 114973 15 ccmni, Live 0xbf07b000 (P)
ccci_plat 126250 2 ccmni,ccci, Live 0xbf053000 (P)
mtk_drvb_77 6085 0 - Live 0xbf04e000 (P)
mtklfb 23274 0 - Live 0xbf044000
pvrsrvkm 165355 139 mtklfb, Live 0xbf00e000
mtk_hwe 1273 0 - Live 0xbf00a000 (P)
aed 16437 3 - Live 0xbf000000 (P)

RAM: 1024 MB (997 MB available)

System RAM: 997.000MB
mtkfb.0: 5.000MB

Flash: 4 GB (3.589 GB actual); 32 GB (31.250 GB actual)

mmcblk0: 3.589 GB
mmcblk1: 31.250 GB

Найти похожие устройства
Same CPU:
Same Display resolution:
Same ro.build.description:

Тачскрин для ZTE tmn smart a18

Новый аккумулятор для ZTE tmn smart a18

Чехлы для ZTE tmn smart a18