1. Install SpecDevice
2. Run and decode your specs
3. Get your link (read more...)
General Specifications | |
---|---|
Manufacturer | alps |
Model | I Phone 5 |
Firmware | 4.1.2; eng.root.1366889021; SDK10 |
CPU | 2 cores; ARMv7 Processor rev 10 (v7l) I Phone 5 |
Display | 800 x 480; DPI: 240; Evaluated Size: 3,9" |
Touch screen | Multitouch 2 points |
GPU | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.7@276259 |
RAM | 256 MB (242 MB available) |
Flash | 16 GB (14.944 GB actual); 0.5 GB (0.454 GB actual) (see memory map tab) |
Communications | |
Phone | GSM; Net: EDGE |
WiFi | lca_core; IEEE 802.11 b/g/n; MediaTek MT6628; AP Mode |
USB Host | Yes |
Bluetooth | Bluetooth 3.0+HS, 4.0 |
GPS | Yes |
Advanced Features | |
Front camera | Photo: 1.9 MP; Max: 1600x1200; Focus: infinity; Flash modes: on off torch |
Back camera | Photo: 1.9 MP; Max size: 1600x1200; Focus: infinity; No flash |
Sensors | AMI304 3-axis Magnetic Field sensor (Aichi Steel); range: 0...600; resolution: 0,002 (0%); power: 0,25mA; |
ADXL345 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; | |
CM3623 Proximity Sensor (Capella); range: 0...1; resolution: 1 (100%); power: 0,13mA; | |
CM3623 Light Sensor (Capella); range: 0...10240; resolution: 1 (0,01%); power: 0,13mA; | |
MPU3000 gyroscope Sensor (Invensensor); range: 0...34,91; resolution: 0,011 (0,031%); power: 6,1mA; | |
Gravity Sensor (Google Inc.); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; | |
Linear Acceleration Sensor (Google Inc.); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; | |
Rotation Vector Sensor (Google Inc.); range: 0...1; resolution: 0 (0%); power: 0,38mA; | |
Vibrator | Yes |
Supported languages | 41; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Portuguese; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
Battery | Technology: Li-ion; Voltage: 3611 |
FM radio | Supported by chipset |
Owner's comment: | помогите опознать |
SD Version: | 1.1 5 |
KERNEL: Linux version 2.6.35.7 (root@ubuntu) (gcc version 4.4.3 (GCC) ) #1 PREEMPT Thu Apr 25 19:23:31 CST 2013
CODENAME: REL
Mainboard: sanstar15_gb2
BRAND: SSD
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: sanstar15_gb2
DISPLAY: S006_SSD_V1.0
FINGERPRINT: alps/sanstar15_gb2/sanstar15_gb2:4.1.2/GRK39F/1366889021:user/test-keys
HARDWARE: mt6575
ID: GRK39F
TAGS: test-keys
Processor : ARMv7 Processor rev 10 (v7l)
BogoMIPS : 1998.84
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc09
CPU revision : 10
Hardware : MT6577
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_stream2
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<7>[11838.126041] [11958:dhcpcd-run-hook] set proc[11958] name: -> [ls]
<7>[11838.128928] [11958:ls] exit
<7>[11838.129056] [11958:ls] sig 17 to [11941:dhcpcd-run-hook]
<7>[11838.129630] [11941:dhcpcd-run-hook] fork [11959:dhcpcd-run-hook]
<7>[11838.130195] [11959:dhcpcd-run-hook] set proc[11959] name: -> [setprop]
<7>[11838.132205] [11959:setprop] exit
<7>[11838.133919] [11959:setprop] sig 17 to [11941:dhcpcd-run-hook]
<7>[11838.134318] [11941:dhcpcd-run-hook] fork [11960:dhcpcd-run-hook]
<7>[11838.137471] [11960:dhcpcd-run-hook] set proc[11960] name: -> [ls]
<7>[11838.142692] [11960:ls] exit
<7>[11838.142817] [11960:ls] sig 17 to [11941:dhcpcd-run-hook]
<7>[11838.142919] [11941:dhcpcd-run-hook] exit
<7>[11838.143040] [11941:dhcpcd-run-hook] sig 17 to [1807:dhcpcd]
<7>[11838.144579] [1807:dhcpcd] exit
<7>[11838.144809] [1807:dhcpcd] sig 17 to [1:init]
<3>[11838.144989] init: untracked pid 1807 exited
<5>[11838.145360] [Power/Alarm] alarm_open (11929:11939)
<7>[11838.270340] [11929:gle.android.gms] fork [11961:gle.android.gms]
<7>[11838.275388] [11961:gle.android.gms] set proc[11961] name: -> [Gservices]
<7>[11838.299213] [11929:gle.android.gms] fork [11962:gle.android.gms]
<7>[11838.300049] [11962:gle.android.gms] set proc[11962] name: -> [AsyncTask #1]
<7>[11838.383653] [11945:dmesg] exit
<7>[11838.383818] [11945:dmesg] sig 17 to [11937:AsyncTask #1]
<7>[11838.399141] [98:zygote] fork [11963:zygote]
<7>[11838.411651] [11963:zygote] fork [11964:zygote]
<7>[11838.411710] [11964:zygote] set proc[11964] name: -> [HeapWorker]
<7>[11838.412372] [11963:zygote] fork [11965:zygote]
<7>[11838.417663] [11965:zygote] set proc[11965] name: -> [GC]
<7>[11838.421169] [11963:zygote] fork [11966:zygote]
<7>[11838.421215] [11966:zygote] set proc[11966] name: -> [Signal Catcher]
<7>[11838.465444] [SYSRAM][EanbleSwitchBank]MFG to SYSRAM, SWITCH_BANK = 0x00000000, u4AllocatedTbl = 0x00000000
<6>[11838.512745] [WLAN] rfkill_set_block(blocked 1)
<6>[11838.512755] [WLAN] Power off
<3>[11838.512769] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(4) type(3) start
<4>[11838.512790] [STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<6>[11838.512829] src = COMBO_IF_UART, to enter deep idle? 0
<7>[11838.518385] [11963:zygote] fork [11967:zygote]
<4>[11838.527644] [STP-PSM] [I]_stp_psm_do_wait: STP is waiting state for ACT, i=1
<6>[11838.527683] [WMT-DFT][I]hif_sdio_wifi_off:start!
<5>[11838.527697] [wlan] Remove wlan!
<5>[11838.527746] [wlan]
<1>[11838.527752] tx_thread should stop now...
<3>[11838.527761] [wlan] OID Timeout! Releasing pending OIDs ..
<5>[11838.527772] [wlan] mtk_sdiod stops
<7>[11838.527786] [1790:tx_thread] exit
<5>[11838.527823] [wlan] mtk_sdiod stopped
<7>[11838.528657] [11967:zygote] set proc[11967] name: -> [JDWP]
<7>[11838.529008] [11963:zygote] fork [11968:zygote]
<7>[11838.529336] [11968:zygote] set proc[11968] name: -> [Compiler]
<7>[11838.532941] [11963:zygote] fork [11969:zygote]
<7>[11838.535568] [11963:zygote] set proc[11963] name: -> [re-initialized>]
<7>[11838.536497] [11969:zygote] set proc[11969] name: -> [BinderThd_AP119]
<7>[11838.537506] [11969:BinderThd_AP119] fork [11970:BinderThd_AP119]
<7>[11838.542984] [11963:re-initialized>] set proc[11963] name: -> [om.buak.Link2SD]
<7>[11838.544092] [11970:BinderThd_AP119] set proc[11970] name: -> [BinderThd_AP119]
<7>[11838.553163] [SYSRAM][EanbleSwitchBank]SYSRAM to MFG, SWITCH_BANK = 0x00000007, u4AllocatedTbl = 0x00000000
<6>[11838.567891] [wlan] QM: Enter qmFlushRxQueues()
<6>[11838.568313] [wlan] QM: Enter qmFlushTxQueues()
<5>[11838.568350] [wlan] Number of Stalled Packets = 0
<7>[11838.570655] [244:NativeDaemonCon] fork [11971:NativeDaemonCon]
<7>[11838.587667] [11971:NativeDaemonCon] set proc[11971] name: -> [Thread-884]
<7>[11838.597289] [11971:Thread-884] exit
<7>[11838.644376] [11962:AsyncTask #1] fork [11972:AsyncTask #1]
<7>[11838.687620] [11972:AsyncTask #1] exit
<7>[11838.732267] [11949:ot:bdservice_v1] fork [11973:ot:bdservice_v1]
<7>[11838.732314] [11973:ot:bdservice_v1] set proc[11973] name: -> [AsyncTask #1]
<5>[11838.827599] [wlan] unregisterdev(0xcabf4000)
<6>[11838.827648] [WMT-DFT][I]hif_sdio_wifi_off:ok!
<7>[11838.827675] [1789:ksdioirqd/mmc1] exit
<6>[11838.827756] [WMT-DFT][I]hif_sdio_wifi_off:sdio_release_irq() for wifi ok
<4>[11838.827771] mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[11838.827779] mtk_wcn_cmb_sdio_off (3)
<3>[11838.827789] msdc3 -> USR Suspend <- msdc_pm() : L<1206> PID
<6>[11838.827832] [WMT-DFT][I]hif_sdio_remove:start!
<6>[11838.827879] [WMT-DFT][I]hif_sdio_remove:sdio func(0xc2f81360) is removed successfully!
<6>[11838.827955] mmc1: card 0001 removed
<3>[11838.847907] msdc3 -> save latch data<1> cmd<1> <- msdc_ops_set_ios() : L<2981> PID
<3>[11838.847923] msdc3 -> set mclk to 0 <- msdc_set_mclk() : L<644> PID
<3>[11838.848031] [WMT-CORE][I]opfunc_func_off:WMT-CORE:Fun(3) [POWER_OFF] and power down chip
<4>[11838.848051] [STP-PSM] [I]_stp_psm_is_redundant_active_op: redundant opId found, opId(1), preOpid(1)
<6>[11838.848072] [STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[11838.848084] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[11838.848096] [STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[11838.848104] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(1)
<4>[11838.848117] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[11838.848127] Flush type = 4 Rx Queue
<3>[11838.867747] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(close_stp) result(0)
<3>[11838.867766] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, hw_pwr_off start
<3>[11838.867778] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, BGF_EINT IRQ unregistered and disabled
<3>[11838.867792] [WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:ALL EINT not defined
<3>[11838.867802] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, ALL_EINT IRQ unregistered and disabled
<3>[11838.867813] [WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[11838.867825] [WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[11838.867838] [WMT-PLAT][I]wmt_plat_i2s_ctrl:[MT662x]warnning:FM digital mode is not set, no I2S GPIO settings should be modified by combo driver
<3>[11838.867851] [WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<3>[11838.867863] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[11838.867873] [WMT-PLAT][W]wmt_plat_gps_lna_ctrl:host gps lna pin not defined!!!
<3>[11838.867882] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, hw_pwr_off finish
<3>[11838.867892] [WMT-CORE][W]opfunc_pwr_off:HW_PWR_OFF ok
<3>[11838.867906] [WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC OFF]status(b:0 f:0 g:0 w:0 lpbk:0 coredump:0 wmt:0 sd1:0 sd2:0 stp:0)
<6>[11838.867940] [STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[11838.867958] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(4) type(3) ok
<7>[11838.952289] [11963:om.buak.Link2SD] fork [11974:om.buak.Link2SD]
<5>[11838.954156] [Power/Alarm] alarm 1 set 1411830300.000000000
<7>[11838.972342] [SYSRAM][EanbleSwitchBank]MFG to SYSRAM, SWITCH_BANK = 0x00000000, u4AllocatedTbl = 0x00000000
<7>[11838.975975] [221:er.ServerThread] fork [11975:er.ServerThread]
<7>[11838.976315] [SYSRAM][EanbleSwitchBank]SYSRAM to MFG, SWITCH_BANK = 0x00000007, u4AllocatedTbl = 0x00000000
<7>[11838.977236] [11975:er.ServerThread] set proc[11975] name: -> [Thread-885]
<7>[11838.981344] [11974:om.buak.Link2SD] set proc[11974] name: -> [IntentService[A]
<7>[11839.010286] [11973:AsyncTask #1] fork [11976:AsyncTask #1]
<7>[11839.019066] [11975:Thread-885] exit
<6>[11839.025712] [WLAN] rfkill_set_block(blocked 0)
<6>[11839.025723] [WLAN] Power on
<3>[11839.025736] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[11839.025753] [STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[11839.028771] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[11839.028786] [WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(not defined)
<3>[11839.028795] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO122)
<3>[11839.028804] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(not defined)
<3>[11839.028813] [WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[11839.028821] [WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO15)
<3>[11839.028830] [WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(18)
<3>[11839.028839] [WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO17)
<3>[11839.028849] [WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(17)
<3>[11839.028857] [WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<3>[11839.028866] [WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[11839.028875] [WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[11839.028883] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[11839.028892] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[11839.028901] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[11839.028910] [WMT-PLAT][I]wmt_plat_dump_pin_conf:FM digital mode is not set, no need for I2S GPIOs
<3>[11839.028921] [WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(GPIO118)
<3>[11839.028929] [WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(not defined)
<3>[11839.028939] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[11839.028950] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<3>[11839.028961] [WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:ALL EINT not defined
<3>[11839.028971] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[11839.028985] [WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[11839.028996] [WMT-PLAT][W]wmt_plat_gps_lna_ctrl:host gps lna pin not defined!!!
<3>[11839.029005] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<7>[11839.031287] [1794:WifiWatchdogThr] exit
<7>[11839.039944] [11974:IntentService[A] fork [11977:IntentService[A]
<7>[11839.127841] [11976:AsyncTask #1] set proc[11976] name: -> [AsyncTask #2]
<3>[11839.237629] [WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[11839.237649] [WMT-PLAT][I]wmt_plat_i2s_ctrl:[MT662x]warnning:FM digital mode is not set, no I2S GPIO settings should be modified by combo driver
<3>[11839.237664] [WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<4>[11839.237845] [STP-PSM] [E]_stp_psm_notify_stp(1174):ERROR! Invalid Action!!
<4>[11839.237851]
<3>[11839.237872] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[11839.237883] [WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[11839.237893] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<4>[11839.238040] mt6575_get_bus_freq() return 192400
<3>[11839.238179] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[11839.238190] Flush type = 4 Rx Queue
<3>[11839.238319] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[11839.238334] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[11839.238347] [STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[11839.238355] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[11839.238365] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<6>[11839.238377] [STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[11839.238387] [STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[11839.238398] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[11839.238409] [STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[11839.244039] [WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6628)
<7>[11839.246922] [11977:IntentService[A] exit
<3>[11839.249682] [WMT-IC][I]mt6628_ver_check:MT6628: read hw_ver (hw version) (0x8b10)
<3>[11839.255330] [WMT-IC][I]mt6628_ver_check:MT6628: read fw_ver (rom version) (0x8b10)
<3>[11839.255346] [WMT-IC][I]mt6628_find_wmt_ic_info:found ic info(0x8b10) by full match! index:2
<3>[11839.255360] [WMT-IC][I]mt6628_ver_check:MT6628: wmt ic info: MT6628.E3 (0x8b10, WMTHWVER:2, patch_ext:_e2)
<3>[11839.255374] [WMT-CORE][I]wmt_core_hw_check:chip id(0x6628) ver_check ok
<3>[11839.266388] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[11839.266403] [WMT-IC][I]mt6628_sw_init:WMT-CORE: change baudrate(4000000) ok
<3>[11839.279244] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(srh_patch) result(0)
<3>[11839.279262] [WMT-IC][I]mt6628_patch_dwn:valid patch found: (/system/etc/firmware//mt6628_patch_e2_hdr.bin)
<3>[11839.280221] [WMT-IC][I]mt6628_patch_dwn:===========================================
<3>[11839.280235] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Built Time = 20120807180600a
<3>[11839.280246] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[11839.280256] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[11839.280266] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Ph Ver = 0x0010
<3>[11839.280275] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Platform = 1150
<3>[11839.280285] [WMT-IC][I]mt6628_patch_dwn:===========================================
<7>[11839.288458] [SYSRAM][EanbleSwitchBank]MFG to SYSRAM, SWITCH_BANK = 0x00000000, u4AllocatedTbl = 0x00000000
<7>[11839.361983] [SYSRAM][EanbleSwitchBank]SYSRAM to MFG, SWITCH_BANK = 0x00000007, u4AllocatedTbl = 0x00000000
<7>[11839.369451] [11898:ient.android.im] fork [11978:ient.android.im]
<7>[11839.369509] [11978:ient.android.im] set proc[11978] name: -> [AsyncTask #1]
<3>[11839.421863] [WMT-IC][I]mt6628_patch_dwn:wmt_core: patch dwn:0 frag(21, 176) ok
<3>[11839.422588] [WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf07f8ac)
<3>[11839.423601] [WMT-IC][I]mt6628_sw_init:init_coex ok
<6>[11839.424361] [STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[11839.424375] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[11839.424387] [STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[11839.424398] [WMT-IC][I]mt6628_sw_init:enable host STP-UART-FULL mode
<3>[11839.441798] [WMT-IC][I]mt6628_sw_init:set fm mode (2) ok
<3>[11839.441811] [WMT-IC][I]mt6628_sw_init:disable mt662x firmware coredump
<6>[11839.441822] [STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[11839.441835] [STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[11839.441846] mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[11839.441854] board_sdio_ctrl force off before on
<6>[11839.441860] mtk_wcn_cmb_sdio_off (3)
<6>[11839.441900] mtk_wcn_cmb_sdio_on (3)
<3>[11839.441933] msdc3 -> USR Resume <- msdc_pm() : L<1231> PID
<3>[11839.443115] msdc3 -> sdio ops_get_cd<1> <- msdc_ops_get_cd() : L<3028> PID
<3>[11839.477873] msdc3 -> ================ <- msdc_set_mclk() : L<692> PID
<3>[11839.477890] msdc3 -> !!! Set<260KHz> Source<197000KHz> -> sclk<259KHz> DDR<0> mode<0> div<190> <- msdc_set_mclk() : L<694> PID
<3>[11839.477905] msdc3 -> ================ <- msdc_set_mclk() : L<695> PID
<3>[11839.498201] msdc3 -> XXX CMD<52> MSDC_INT_CMDTMO Arg<0x00000c00> <- msdc_irq() : L<3213>
<3>[11839.499697] msdc3 -> XXX CMD<52> MSDC_INT_CMDTMO Arg<0x80000c08> <- msdc_irq() : L<3213>
<5>[11839.500824] [Power/Alarm] alarm_open (11834:11834)
<3>[11839.504045] msdc3 -> XXX CMD<8> MSDC_INT_CMDTMO Arg<0x000001aa> <- msdc_irq() : L<3213>
<3>[11839.509003] msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1291> PID
<3>[11839.529662] msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<2973> PID
<3>[11839.529699] msdc3 -> ================ <- msdc_set_mclk() : L<692> PID
<3>[11839.529715] msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<694> PID
<3>[11839.529729] msdc3 -> ================ <- msdc_set_mclk() : L<695> PID
<6>[11839.530472] mmc1: new high speed SDIO card at address 0001
<6>[11839.531289] [WMT-DFT][I]hif_sdio_probe:start!
<6>[11839.531303] [WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x6628) num(0x1)
<6>[11839.531313] [WMT-DFT][I]hif_sdio_probe:card->info[0]: 6628
<6>[11839.531321] [WMT-DFT][I]hif_sdio_probe:card->info[1]: Combo
<6>[11839.531330] [WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[11839.531337] [WMT-DFT][I]hif_sdio_probe:card->info[3]:
<6>[11839.531427] [WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(520192)
<7>[11839.579131] [98:zygote] fork [11979:zygote]
<7>[11839.589186] [11834:e.process.gapps] fork [11980:e.process.gapps]
<7>[11839.591285] [11979:zygote] fork [11981:zygote]
<7>[11839.591351] [11980:e.process.gapps] set proc[11980] name: -> [GTalkConnWorker]
<7>[11839.591749] [11981:zygote] set proc[11981] name: -> [HeapWorker]
<7>[11839.593014] [11979:zygote] fork [11982:zygote]
<7>[11839.594167] [11834:e.process.gapps] fork [11983:e.process.gapps]
<6>[11839.597656] [WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[11839.597948] [2:kthreadd] fork [11984:kthreadd]
<7>[11839.597985] [11982:zygote] set proc[11982] name: -> [GC]
<7>[11839.598161] [11983:e.process.gapps] set proc[11983] name: -> [Thread-13]
<7>[11839.617962] [11979:zygote] fork [11985:zygote]
<6>[11839.622205] [WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<5>[11839.622234] [wlan] net_device prDev(0xcabf4000) allocated
<5>[11839.624353] [wlan] Open FW image: WIFI_RAM_CODE done
<7>[11839.631722] [11985:zygote] set proc[11985] name: -> [Signal Catcher]
<7>[11839.632120] [11979:zygote] fork [11986:zygote]
<5>[11839.643221] [wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[11839.643352] [wlan] Virtual Address = d0709000 for COMMON MGMT MEMORY POOL.
<5>[11839.643366] [wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[11839.643411] [wlan] Virtual Address = d070c000 for SW_RFB_T.
<5>[11839.643422] [wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[11839.643462] [wlan] Virtual Address = d0714000 for MSDU_INFO_T.
<6>[11839.643474] [wlan] wlanAdapterStart(): Acquiring LP-OWN
<7>[11839.647345] [11986:zygote] set proc[11986] name: -> [JDWP]
<7>[11839.648458] [11979:zygote] fork [11987:zygote]
<7>[11839.657681] [11987:zygote] set proc[11987] name: -> [Compiler]
<7>[11839.680958] [11979:zygote] fork [11988:zygote]
<7>[11839.685305] [11979:zygote] set proc[11979] name: -> [re-initialized>]
<6>[11839.687118] [wlan] Chip ID: 0x6628
<6>[11839.687131] [wlan] Revision ID: 0x0
<7>[11839.694242] [11988:zygote] set proc[11988] name: -> [BinderThd_AP119]
<7>[11839.718421] [11834:e.process.gapps] fork [11989:e.process.gapps]
<7>[11839.721324] [11989:e.process.gapps] set proc[11989] name: -> [Thread-14]
<7>[11839.722051] [11834:e.process.gapps] fork [11990:e.process.gapps]
<7>[11839.729904] [11990:e.process.gapps] set proc[11990] name: -> [Thread-15]
<7>[11839.819042] [11988:BinderThd_AP119] fork [11991:BinderThd_AP119]
<7>[11839.826389] [11991:BinderThd_AP119] set proc[11991] name: -> [BinderThd_AP119]
<7>[11839.829560] [11979:re-initialized>] set proc[11979] name: -> [ek.TunnyBrowser]
<7>[11840.482174] [SYSRAM][EanbleSwitchBank]MFG to SYSRAM, SWITCH_BANK = 0x00000000, u4AllocatedTbl = 0x00000000
<4>[11840.487702] select 11779 (ackageinstaller), adj 11, size 5331, to kill
<4>[11840.487726] send sigkill to 11779 (ackageinstaller), adj 11, size 5331
<7>[11840.487738] [38:lowmemorykiller] sig 9 to [11779:ackageinstaller]
<7>[11840.494085] [11781:GC] exit
<7>[11840.494128] [11780:HeapWorker] exit
<7>[11840.494155] [11779:ackageinstaller] exit
<7>[11840.503023] [11782:Signal Catcher] exit
<7>[11840.503057] [11783:JDWP] exit
<7>[11840.503082] [11784:Compiler] exit
<7>[11840.504128] [11786:BinderThd_AP117] exit
<7>[11840.505619] [SYSRAM][EanbleSwitchBank]SYSRAM to MFG, SWITCH_BANK = 0x00000007, u4AllocatedTbl = 0x00000000
<7>[11840.511995] [11796:BinderThd_AP117] exit
<7>[11840.512042] [11785:BinderThd_AP117] exit
<6>[11840.526276] [wlan] wlanAdapterStart(): Waiting for Ready bit..
<6>[11840.537920] [wlan] Ready bit asserted
<6>[11840.568005] yaffs: userdata sync do_checkpoint 0,gc_urgen 1
<6>[11840.568017] yaffs: userdata yaffs_FlushSuperBlock 0
<5>[11840.580385] [wlan] [wifi] wlan%d netif_carrier_off
<6>[11840.580402] [wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[11840.580472] [wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[11840.580537] [wlan] Domain: map=0, idx=0, code=0x0000
<7>[11840.580878] [2:kthreadd] fork [11992:kthreadd]
<5>[11840.583819] [wlan] tx_thread starts running...
<7>[11840.596370] [378:BinderThd_AP206] fork [11993:BinderThd_AP206]
<7>[11840.598787] [11993:BinderThd_AP206] set proc[11993] name: -> [executeAppTrans]
<7>[11840.601320] [11785:BinderThd_AP117] sig 17 to [98:zygote]
<7>[11840.602588] [11993:executeAppTrans] exit
<6>[11840.673882] [WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(6628) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[11840.673897] [WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[11840.673916] [WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 coredump:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[11840.674569] [STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<3>[11840.674604] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<4>[11840.674771] [STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<6>[11840.682410] [RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[11840.682431] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[11840.684768] [SYSRAM][EanbleSwitchBank]MFG to SYSRAM, SWITCH_BANK = 0x00000000, u4AllocatedTbl = 0x00000000
<7>[11840.688878] [SYSRAM][EanbleSwitchBank]SYSRAM to MFG, SWITCH_BANK = 0x00000007, u4AllocatedTbl = 0x00000000
<7>[11840.700479] [1:init] fork [11994:init]
<7>[11840.702104] [248:WifiService] fork [11995:WifiService]
<7>[11840.712057] [11995:WifiService] set proc[11995] name: -> [WifiMonitor]
<7>[11840.723014] [11994:init] set proc[11994] name: -> [logwrapper]
<7>[11840.726169] [11994:logwrapper] fork [11996:logwrapper]
<7>[11840.737495] [221:er.ServerThread] fork [11997:er.ServerThread]
<7>[11840.739903] [248:WifiService] fork [11998:WifiService]
<7>[11840.741622] [11996:logwrapper] set proc[11996] name: -> [wpa_supplicant]
<7>[11840.749115] [11997:er.ServerThread] set proc[11997] name: -> [Thread-888]
<7>[11840.750149] [11997:Thread-888] exit
<3>[11840.751666] In kernel Correct 1 at PageAddr=50853, Sector=1
<6>[11840.751677] Less than 2 bit error, ignore
<7>[11840.757648] [11998:WifiService] set proc[11998] name: -> [WifiWatchdogThr]
<7>[11840.803023] [SYSRAM][EanbleSwitchBank]MFG to SYSRAM, SWITCH_BANK = 0x00000000, u4AllocatedTbl = 0x00000000
<7>[11840.814768] [SYSRAM][EanbleSwitchBank]SYSRAM to MFG, SWITCH_BANK = 0x00000007, u4AllocatedTbl = 0x00000000
<7>[11840.938653] [11979:ek.TunnyBrowser] fork [11999:ek.TunnyBrowser]
<7>[11840.938765] [11999:ek.TunnyBrowser] set proc[11999] name: -> [RefQueueWorker@]
<7>[11841.300920] [11974:IntentService[A] exit
<7>[11841.423715] [12000:AsyncTask #1] set proc[12000] name: -> [dmesg]
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GRK39F
ro.build.display.id=S006_SSD_V1.0
ro.build.version.incremental=eng.root.1366889021
ro.custom.build.version=1366889021
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=4.1.2
ro.build.date=2013年 04月 25日 星期四 19:29:51 CST
ro.build.date.utc=1366889391
ro.build.type=user
ro.build.user=root
ro.build.host=ubuntu
ro.build.tags=test-keys
ro.product.model=I Phone 5
ro.product.brand=SSD
ro.product.name=sanstar15_gb2
ro.product.device=sanstar15_gb2
ro.product.board=sanstar15_gb2
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=alps
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=I Phone 5
# ro.build.product is obsolete; use ro.product.device
ro.build.product=sanstar15_gb2
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=sanstar15_gb2-user 4.1.2 GRK39F eng.root.1366889021 test-keys
ro.build.fingerprint=alps/sanstar15_gb2/sanstar15_gb2:4.1.2/GRK39F/1366889021:user/test-keys
ro.build.flavor=
ro.contacts.sim_insert=false
ro.contacts.sim_auto=false
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=S006_SSD_V1.0
ro.mediatek.platform=MT6575
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.GB2.MP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
persist.sys.defaulttimezone=Asia/Shanghai
#
# ADDITIONAL_BUILD_PROPERTIES
#
fmradio.driver.chip=3
ro.sf.hwrotation=180
ril.current.share_modem=1
launcherplus.allappsgrid=2d
launcher2.allappsgrid=3d_20
curlockscreen=1
ro.mediatek.gemini_support=false
ro.mediatek.drm_support=false
mediatek.wlan.chip=MT6628
mediatek.wlan.module.postfix=_mt6628
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.config.ringtone=CaribbeanIce.ogg
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
lca_core 2718 0 - Live 0xbf000000 (P)
pvrsrvkm 163658 33 mtklfb, Live 0xbf006000
mtklfb 14525 0 - Live 0xbf03c000
mtk_drvb 4403 0 - Live 0xbf046000 (P)
mtk_hif_sdio 17706 2 wlan_mt6628,mtk_stp_wmt, Live 0xbf04d000
mtk_stp_wmt 363279 8 wlan_mt6628,mtk_fm_priv,mtk_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf058000 (P)
mtk_stp_uart 21521 1 - Live 0xbf0c1000 (P)
mtk_stp_gps 37166 0 - Live 0xbf0cc000
mtk_stp_bt 39754 0 - Live 0xbf0db000
mtk_fm_drv 98122 1 mtk_fm_priv, Live 0xbf0ea000
mtk_fm_priv 2427 0 - Live 0xbf10b000 (P)
wlan_mt6628 271605 0 - Live 0xbf111000 (P)
ccci_plat 101892 3 sec,ccmni,ccci, Live 0xbf16c000 (P)
ccci 138050 15 ccmni, Live 0xbf18e000 (P)
ccmni 16350 0 - Live 0xbf1bd000 (P)
mt6575_m4u 84190 2 - Live 0xbf1c7000 (P)
devinfo 756 0 - Live 0xbf1e4000 (P)
mt6575_vcodec_kernel_driver 23905 0 - Live 0xbf1ea000 (P)
sec 84741 0 - Live 0xbf1f7000 (P)
aed 17997 3 - Live 0xbf213000 (P)
RAM: 256 MB (242 MB available)
System RAM: 242.000MB
mtkfb.0: 4.000MB
Flash: 16 GB (14.944 GB actual); 0.5 GB (0.454 GB actual)
mmcblk0: 14.944 GB
mtdblock: 0.025 GB
mtdblock1: 0.454 GB
Touch Screen for alps I Phone 5
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
Replacement Battery for alps I Phone 5
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
Cover Cases for alps I Phone 5
$2.19 2Pcs ALPS Mouse Encoder Mouse Decoder 7mm 9mm 11mm Highly Accurate for Wheel Mouse Encoders
$24.72 50pcs/lot Original for ALPS 3D Analog Joystick Button for Xboxone for Xbox One Controller Gamd Pad
$5.06 XBox One Elite Series 2 Controller 3D Analog Joystick ALPS original part 2PCS
$0.25 Outemu otm gaote alps switch Clicky 30g Linear 60g like alps switches Matias switch for mechanical keyboards
$28 10PCS ALPS Original 3D Anolog For PS5 Joystick 3D Rocker Replacement For PlayStation 5 Controller Grip stick Sensor Module
$24.43 10 pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$20.18 50PCS ALPS Original 3D Joystick for Xbox one Controller Repair Parts 3D Analog Sensor Module Joystick for Xbox one S / X
$2.39 2pcs/lot ALPS Original OEM 3D Joystick for PS4 PS5 Controller Repair parts 3D analog stick for Xbox one
$41 Original Japan ALPS Potentiometer RK27 5KA 10KA 20KA 50KA 100KA 250KA 500KA Volume Adjustment Knob Circular Handle 25mm 6-Pin
$190.79 50pcs Original 3D Analog Joystick for Playstation 5 PS5 with ALPS 2.3k Thumbstick Sensor Module
$2.75 Original ALPS Mouse Encoder 11mm High Accurate ALPS 9mm for RAW G403 g603 g703 Solve the roller wheel problem Accessoires 2PCS
$17.06 50PCS Replacement 3D Analog Joystick Analogue Thumbstick For PS2 XBOX 360 ALPS Controller
$9.36 20PCS ALPS Original 3D Joystick for Xbox one Controller Repair parts 3D analog stick for Xbox one s x series S X
$26.38 60pcs/tray for Xbox One/ Series ALPS Original 3D Joystick for PS4 PS5 Controller 3D Analog Stick Sensor Module Thumb Stick
$23.04 Original ALPS 3D Joystick for XBox ONE/Slim/X, Replacement XBox Series S/X Joystick Potentiometer for XBox Gamepads Controller
$5.15 Replacement Headphone Volumn Controller Power Slider of Logitech G933 G633 G935 G533 G733 A50 Gaming Headset ALPS Top Brand
$66.41 10pcs Original Replacement Alps Analog Joystick 3D stick Axis Sensor Module Rocker For Xbox One, One S, One X W/ 10 Thumbsticks
Find Similar devices | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |