- General
- Detalles OS
- CPU info
- GPU extensiones
- Mensajes del kernel WiFi
- build.prop
- Módulos
- Mapa de la memoria
Especificaciones generales | |
---|---|
Marca | alps |
Modelo | e1808_v75_jbl1 |
Versión de Android | 4.0.3; eng.root.1339502077; SDK15 |
CPU | 1 core; ARMv7 Processor rev 10 (v7l); Max: 1001,0 MHz; Min: 166,8 MHz |
Pantalla | 800 x 480; DPI: 240; Evaluated Size: 3,9" |
Pantalla táctil | Multitouch 5 points |
GPU | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.8@789263 |
RAM | 512 MB (484 MB available) |
Flash | 4 GB (3.600 GB actual); 16 GB (14.539 GB actual) (ver pestaña de mapa de memoria) |
Comunicaciones | |
Teléfono | GSM, Dual SIM; Net: EDGE |
WiFi | wlan; IEEE 802.11 a/b/g/n; MediaTek MT6620; AP Mode |
USB Host | No |
Bluetooth | Bluetooth 4.0+HS |
GPS | Yes |
Funciones avanzadas | |
Cámara frontal | Photo: 8.0 MP; Max: 3264x2448; Focus: auto infinity; Flash modes: auto on off torch |
Cámara trasera | Photo: 0.3 MP; Max size: 640x480; Focus: infinity; Flash modes: off |
Sensores | bma222 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; |
tmd2771 Proximity Sensor (Capella); range: 0...1; resolution: 1 (100%); power: 0,13mA; | |
tmd2771 Light Sensor (Capella); range: 0...10240; resolution: 1 (0,01%); power: 0,13mA; | |
Alarma vibrante | Yes |
Idiomas soportados | 43; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
Batería | Technology: Li-ion; Voltage: 3805 |
FM radio | 76 to 108MHz |
SD Version: | 1.1 7 |
KERNEL: Linux version 3.0.13 (root@agold-desktop) (gcc version 4.4.3 (GCC) ) #1 PREEMPT Tue Jun 12 19:54:21 CST 2012
CODENAME: REL
Mainboard: e1808_v75_jbl1
BRAND: alps
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: e1808_v75_jbl1
DISPLAY: ALPS.ICS.MP.V1.11
FINGERPRINT: alps/e1808_v75_jbl1/e1808_v75_jbl1:4.0.3/IML74K/1339502077:user/test-keys
HARDWARE: mt6575
ID: IML74K
TAGS: test-keys
Processor : ARMv7 Processor rev 10 (v7l)
BogoMIPS : 1993.93
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc09
CPU revision : 10
Hardware : MT6575
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<7>[67255.832570] [24287:dmesg] exit
<7>[67255.832738] [24287:dmesg] sig 17 to [24278:AsyncTask #2]
<7>[67255.865146] [279:WifiStateMachin] fork err at pid
<7>[67255.865172] [279:WifiStateMachin] fork [24290:WifiStateMachin]
<7>[67255.866059] [24290:WifiStateMachin] set proc[24290] name: ->[loadDriverThrea]
<6>[67255.910000] [WLAN] rfkill_set_block(blocked 0)
<6>[67255.910012] [WLAN] Power on
<3>[67255.910029] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[67255.910840] [STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[67255.910875] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[67255.911956] [WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(not defined)
<3>[67255.921074] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO124)
<3>[67255.921772] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(not defined)
<3>[67255.926634] [WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[67255.927323] [WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO185)
<3>[67255.928079] [WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(14)
<3>[67255.928826] [WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO184)
<3>[67255.929594] [WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(11)
<3>[67255.930353] [WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<7>[67255.942380] [239:er.ServerThread] fork err at pid
<7>[67255.942405] [239:er.ServerThread] fork [24291:er.ServerThread]
<7>[67255.949493] [24291:er.ServerThread] set proc[24291] name: ->[Thread-1375]
<7>[67255.955477] [24291:Thread-1375] exit
<3>[67255.959015] [WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[67255.959746] [WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[67255.960470] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[67255.961195] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[67255.962028] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[67255.962756] [WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_CK(not defined)
<3>[67255.963535] [WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_WS(not defined)
<3>[67255.964961] [WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_DAT(not defined)
<3>[67255.965751] [WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(GPIO206)
<3>[67255.966506] [WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(not defined)
<3>[67255.967519] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[67255.968577] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<3>[67255.969410] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[67255.970196] [WMT-PLAT][W]wmt_plat_gps_lna_ctrl:host gps lna pin not defined!!!
<3>[67255.971088] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[67256.172068] [WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[67256.172827] [WMT-PLAT][E]wmt_plat_i2s_ctrl(1065):[MT6620]Error:FM digital mode set, but no I2S GPIOs defined
<3>[67256.174044] [WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<3>[67256.174994] [WMT-LIB][I]wmt_lib_ps_handler:MT6620 Not Ready, Dont Send Sleep/Wakeup Command
<4>[67256.176027] [STP-PSM] [E]_stp_psm_notify_stp(990):ERROR! Invalid Action!!
<4>[67256.176033]
<3>[67256.177221] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[67256.178721] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<4>[67256.182910] mt6575_get_bus_freq() return 192400
<3>[67256.183742] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[67256.184483] Flush type = 4 Rx Queue
<3>[67256.185078] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[67256.185876] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[67256.185889] [STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[67256.186528] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[67256.187497] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[67256.188184] [STP-PSM] [I]_stp_psm_set_state: work_state = ACT --> ACT
<6>[67256.188989] [STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[67256.188999] [STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[67256.189009] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<3>[67256.194489] [WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6620)
<3>[67256.200772] [WMT-IC][I]mt6620_ver_check:MT6620: read hw_ver (hw version) (0x8a11)
<3>[67256.207154] [WMT-IC][I]mt6620_ver_check:MT6620: read fw_ver (rom version) (0x8a10)
<3>[67256.208111] [WMT-IC][I]mt6620_find_wmt_ic_info:found ic info(0x8a11) by full match! index:3
<3>[67256.209146] [WMT-IC][I]mt6620_ver_check:MT6620: wmt ic info: MT6620.E4 (0x8a11, WMTHWVER:3, patch_ext:_e3)
<3>[67256.210346] [WMT-CORE][I]wmt_core_hw_check:chip id(0x6620) ver_check ok
<3>[67256.223759] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[67256.224568] [WMT-IC][I]mt6620_sw_init:WMT-CORE: change baudrate(4000000) ok
<3>[67256.227219] [WMT-IC][I]mt6620_update_patch_name:full firmware patch name: /system/etc/firmware/mt6620_patch_e3_hdr.bin
<3>[67256.235060] [WMT-IC][I]mt6620_patch_dwn:===========================================
<3>[67256.236020] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Built Time = 20120320180900
<3>[67256.236954] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[67256.237755] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[67256.238594] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Ph Ver = 0x001b
<3>[67256.239387] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Platform = 1212
<3>[67256.240188] [WMT-IC][I]mt6620_patch_dwn:===========================================
<3>[67256.566734] [WMT-IC][I]mt6620_patch_dwn:wmt_core: patch dwn:0 frag(43, 752) ok
<3>[67256.567670] [WMT-IC][I]mt6620_sw_init:Not to check the patch validity
<3>[67256.568834] [WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf12d030)
<3>[67256.573394] [WMT-IC][I]mt6620_sw_init:init_coex ok
<6>[67256.574382] [STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[67256.574394] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<3>[67256.574405] [WMT-IC][I]mt6620_sw_init:enable host STP-UART-FULL mode
<3>[67256.593949] [WMT-IC][I]mt6620_sw_init:set fm mode (2) ok
<6>[67256.594609] [STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[67256.594622] [STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[67256.594635] mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[67256.595305] board_sdio_ctrl force off before on
<6>[67256.595312] mtk_wcn_cmb_sdio_off (3)
<6>[67256.595357] mtk_wcn_cmb_sdio_on (3)
<3>[67256.595391] msdc3 -> USR Resume <- msdc_pm() : L<1260> PID
<3>[67256.612177] msdc3 -> ================ <- msdc_set_mclk() : L<756> PID
<3>[67256.613206] msdc3 -> !!! Set<400KHz> Source<197000KHz> -> sclk<397KHz> DDR<0> mode<0> div<124> <- msdc_set_mclk() : L<758> PID
<3>[67256.614848] msdc3 -> ================ <- msdc_set_mclk() : L<759> PID
<3>[67256.637512] msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1320> PID
<3>[67256.661821] msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<3218> PID
<3>[67256.662990] msdc3 -> ================ <- msdc_set_mclk() : L<756> PID
<3>[67256.664015] msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<758> PID
<3>[67256.665680] msdc3 -> ================ <- msdc_set_mclk() : L<759> PID
<6>[67256.668355] mmc2: new high speed SDIO card at address 0001
<6>[67256.670017] [WMT-DFT][I]hif_sdio_probe:start!
<6>[67256.670031] [WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x20a) num(0x1)
<6>[67256.670041] [WMT-DFT][I]hif_sdio_probe:card->info[0]: MediaTek MT6620 Wireless Combo Chip
<6>[67256.670050] [WMT-DFT][I]hif_sdio_probe:card->info[1]:
<6>[67256.670058] [WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[67256.670142] [WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(520192)
<7>[67256.670165] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 72767769 > 8ms
<7>[67256.670181] work: mmc_rescan+0x0/0x370
<6>[67256.752015] [WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[67256.752110] [2:kthreadd] fork err at pid
<7>[67256.752131] [2:kthreadd] fork [24292:kthreadd]
<6>[67256.752154] [WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<5>[67256.752185] [wlan] net_device prDev(0xca0ad000) allocated
<4>[67256.753110] [RT_MONITOR]WARNNING [24292:ksdioirqd/mmc2] SET NOT ALLOW RT Prio [1] for proc [24292:ksdioirqd/mmc2]
<4>[67256.758369] Backtrace:
<4>[67256.758700] [
<4>[67256.759742] r7:00000001 r6:00000000 r5:c9ea2000 r4:ca101000
<4>[67256.760930] [
<4>[67256.762316] [
<4>[67256.763935] [
<4>[67256.765261] [
<5>[67256.767486] [wlan] Open FW image: WIFI_RAM_CODE done
<4>[67256.768586] [
<4>[67256.769510] r7:00000013 r6:c0087eb8 r5:c009f538 r4:db55fd78
<5>[67256.772725] [wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[67256.773555] [wlan] Virtual Address = de91e000 for COMMON MGMT MEMORY POOL.
<5>[67256.774398] [wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[67256.775054] [wlan] Virtual Address = de920000 for SW_RFB_T.
<5>[67256.775741] [wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[67256.776429] [wlan] Virtual Address = de954000 for MSDU_INFO_T.
<6>[67256.777150] [wlan] wlanAdapterStart(): Acquiring LP-OWN
<6>[67256.793392] [wlan] Chip ID: 0x6620
<6>[67256.793408] [wlan] Revision ID: 0x1
<6>[67257.470478] [wlan] wlanAdapterStart(): Waiting for Ready bit..
<5>[67257.756824] [Power/Alarm] alarm_timer_triggered type 0 at 1447048464.618022078 (1)
<5>[67257.758469] [Power/Alarm] alarm 0 set 1447050406.714000000
<5>[67257.760499] [Power/Alarm] alarm wait (0x0)
<7>[67257.796278] [20890:ndroid.settings] fork err at pid
<7>[67257.796305] [20890:ndroid.settings] fork [24293:ndroid.settings]
<7>[67257.797645] [24293:ndroid.settings] set proc[24293] name: ->[SharedPreferenc]
<7>[67257.814887] [20890:ndroid.settings] fork err at pid
<7>[67257.814919] [20890:ndroid.settings] fork [24294:ndroid.settings]
<7>[67257.817299] [24294:ndroid.settings] set proc[24294] name: ->[IntentService[A]
<6>[67257.852674] [wlan] Ready bit asserted
<7>[67257.863890] [19621:push-receiver] exit
<7>[67257.864452] [19620:push-sender] exit
<5>[67257.881512] [wlan] [wifi] wlan%d netif_carrier_off
<6>[67257.882455] [wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[67257.882540] [wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[67257.882634] [wlan] Domain: map=0, idx=0, code=0x0000
<7>[67257.890250] [2:kthreadd] fork err at pid
<7>[67257.890280] [2:kthreadd] fork [24295:kthreadd]
<5>[67257.896461] [wlan] tx_thread starts running...
<6>[67257.901157] [WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(20a) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[67257.901172] [WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[67257.901188] [WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[67257.905523] [STP-PSM] [I]_stp_psm_enable: PSM MODE Enable==============================>
<4>[67257.905532]
[STP-PSM] [I]_stp_psm_dump_active_q: Active op list:++
<4>[67257.907308] [STP-PSM] [I]_stp_psm_dump_active_q: STP_OPID_PSM_WAKEUP
<4>[67257.908098] [STP-PSM] [I]_stp_psm_dump_active_q: Active op list:--
<4>[67257.912049] [STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<4>[67257.913206] [STP-PSM] [I]_stp_psm_notify_wmt_wakeup_wq: OPID(1) type(0) bRet(1)
<4>[67257.913213]
<4>[67257.914306] [STP-PSM] [I]_stp_psm_do_wait: +Total waits for ACT takes 0 msec
<4>[67257.915188] [STP-PSM] [I]_stp_psm_enable: PSM MODE Enable<=============================
<4>[67257.915195]
<3>[67257.920967] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<7>[67257.929530] [150:netd] fork err at pid
<7>[67257.929559] [150:netd] fork [24296:netd]
<7>[67257.930390] [24290:loadDriverThrea] exit
<7>[67257.947973] [24296:netd] set proc[24296] name: ->[ip]
<7>[67257.950590] [24296:ip] exit
<7>[67257.962930] [24296:ip] sig 17 to [150:netd]
<7>[67257.966262] [23224:kworker/u:0] fork err at pid
<7>[67257.966287] [23224:kworker/u:0] fork [24297:kworker/u:0]
<7>[67257.973348] [24297:kworker/u:0] fork err at pid
<7>[67257.973372] [24297:kworker/u:0] fork [24298:kworker/u:0]
<7>[67257.996322] [24298:kworker/u:0] exit
<7>[67257.996355] [24298:kworker/u:0] sig 17 to [24297:kworker/u:0]
<7>[67257.996869] [24297:kworker/u:0] exit
<6>[67257.998045] [RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[67257.998067] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[67258.013634] [1:init] fork err at pid
<7>[67258.013659] [1:init] fork [24299:init]
<7>[67258.014244] WQ_WARN: cpu:0, proc:kworker/0:3, dur: 16078307 > 8ms
<7>[67258.014326] work: wlanSetMulticastListWorkQueue+0x0/0x1f4 [wlan]
<7>[67258.017494] [279:WifiStateMachin] fork err at pid
<7>[67258.017526] [279:WifiStateMachin] fork [24300:WifiStateMachin]
<7>[67258.037862] [24300:WifiStateMachin] set proc[24300] name: ->[WifiMonitor]
<7>[67258.038922] [24299:init] set proc[24299] name: ->[logwrapper]
<7>[67258.054227] [24299:logwrapper] fork err at pid
<7>[67258.054254] [24299:logwrapper] fork [24301:logwrapper]
<7>[67258.063450] [24301:logwrapper] set proc[24301] name: ->[wpa_supplicant]
<7>[67258.257261] [24293:SharedPreferenc] exit
<7>[67258.258987] [24294:IntentService[A] fork err at pid
<7>[67258.259015] [24294:IntentService[A] fork [24302:IntentService[A]
<7>[67258.267453] [24302:IntentService[A] set proc[24302] name: ->[SharedPreferenc]
<7>[67258.308806] [1654:m.jb.gokeyboard] fork err at pid
<7>[67258.308831] [1654:m.jb.gokeyboard] fork [24303:m.jb.gokeyboard]
<7>[67258.322547] [24303:m.jb.gokeyboard] set proc[24303] name: ->[push-sender]
<7>[67258.322837] [1654:m.jb.gokeyboard] fork err at pid
<7>[67258.322861] [1654:m.jb.gokeyboard] fork [24304:m.jb.gokeyboard]
<7>[67258.328169] [24304:m.jb.gokeyboard] set proc[24304] name: ->[push-receiver]
<7>[67258.328592] [1654:m.jb.gokeyboard] fork err at pid
<7>[67258.328622] [1654:m.jb.gokeyboard] fork [24305:m.jb.gokeyboard]
<7>[67258.336233] [24305:m.jb.gokeyboard] set proc[24305] name: ->[Thread-1616]
<7>[67258.341213] [24303:push-sender] exit
<7>[67258.342622] [24304:push-receiver] exit
<5>[67258.402375] [wlan] N=0 closed
<5>[67258.402863] [wlan] EVENT-ROAMING ABORT: Current Time = 65120010
<5>[67258.403589] [wlan] [13] TRANSITION: [0] -> [0]
<6>[67258.407125] [wlan] NAF=0,0,0
<6>[67258.407140] [wlan] NAF=0,0,0
<7>[67258.425761] WQ_WARN: cpu:0, proc:kworker/0:3, dur: 15915384 > 8ms
<7>[67258.425789] work: kcryptd_crypt+0x0/0x3f8
<7>[67258.452979] WQ_WARN: cpu:0, proc:kworker/0:3, dur: 26915538 > 8ms
<7>[67258.453000] work: kcryptd_crypt+0x0/0x3f8
<7>[67258.494285] WQ_WARN: cpu:0, proc:kworker/0:3, dur: 41030616 > 8ms
<7>[67258.494306] work: kcryptd_crypt+0x0/0x3f8
<7>[67258.546573] [24302:SharedPreferenc] exit
<7>[67258.548446] [1654:m.jb.gokeyboard] fork err at pid
<7>[67258.548468] [1654:m.jb.gokeyboard] fork [24306:m.jb.gokeyboard]
<7>[67258.556531] [149:netd] fork err at pid
<7>[67258.556555] [149:netd] fork [24307:netd]
<5>[67258.564669] [wlan] [13] TRANSITION: [0] -> [2]
<7>[67258.572874] [24306:m.jb.gokeyboard] set proc[24306] name: ->[keyboardThread-]
<7>[67258.623883] [24294:IntentService[A] exit
<7>[67258.832200] [24307:netd] exit
<5>[67258.844997] [wlan] [13] TRANSITION: [2] -> [0]
<6>[67258.848800] [wlan] NAF=0,0,0
<5>[67258.854945] [wlan] N=0 closed
<5>[67258.855311] [wlan] EVENT-ROAMING ABORT: Current Time = 65120460
<5>[67258.856042] [wlan] [13] TRANSITION: [0] -> [0]
<5>[67258.856595] [wlan] [13] TRANSITION: [0] -> [1]
<5>[67258.857153] [wlan] [13] TRANSITION: [1] -> [6]
<5>[67258.857700] [wlan] ChReq net=0 token=1 b=1 c=1 s=1
<6>[67258.860426] [wlan] NAF=0,0,0
<5>[67258.860736] [wlan] ChGrant net=0 token=1 ch=1 sco=1
<5>[67258.861357] [wlan] [13] TRANSITION: [6] -> [7]
<5>[67258.861912] [wlan] STA 40mAllowed=1
<6>[67258.869945] [wlan] Wait Cmd TxSeqNum:1
<6>[67258.873224] [wlan] EVENT_ID_TX_DONE PacketSeq:1 ucStatus: 0 SN: 26
<6>[67258.875376] [wlan] Wait Cmd TxSeqNum:2
<6>[67258.877130] [wlan] EVENT_ID_TX_DONE PacketSeq:2 ucStatus: 0 SN: 27
<6>[67258.879146] [wlan] QM: (fgIsWmmSupported=1, fgSupportQoS=1)
<6>[67258.879165] [wlan] QM: (fgIsWmmSupported=1, fgIsQoS=1)
<6>[67258.879176] [wlan] MQM: Assoc_Rsp Parsing (QoS Enabled=1)
<5>[67258.879198] [wlan] N=0 b=1 c=1 s=1 e=0 h=0 I=0x05 l=1 p=0
<5>[67258.879862] [wlan]
<4>[67258.880098] 90:94:e4:35:36:8e [17] TRANSITION: [0] -> [3]
<4>[67258.880103]
<5>[67258.883205] [wlan] [wifi] wlan0 netif_carrier_on [ssid:LUGOVA23 90:94:e4:35:36:8e]
<5>[67258.884142] [wlan] EVENT-ROAMING START: Current Time = 65120490
<5>[67258.884880] [wlan] [27] TRANSITION: [0] -> [1]
<5>[67258.885428] [wlan] [13] TRANSITION: [7] -> [10]
<6>[67258.892408] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<7>[67258.892547] WQ_WARN: cpu:0, proc:kworker/0:3, dur: 9354462 > 8ms
<7>[67258.892564] work: linkwatch_event+0x0/0x3c
<5>[67258.901528] [wlan] QM: +STA[0]
<7>[67258.902099] WQ_WARN: cpu:0, proc:kworker/0:3, dur: 9519154 > 8ms
<7>[67258.902201] work: wlanSetMulticastListWorkQueue+0x0/0x1f4 [wlan]
<7>[67258.950563] [24305:Thread-1616] exit
<5>[67258.976451] [Power/Alarm] alarm 0 set 1447048471.830000000
<5>[67258.993634] [wlan] N=0 b=1 c=1 s=1 e=0 h=0 I=0x05 l=1 p=0
<5>[67259.096038] [wlan] N=0 b=1 c=1 s=1 e=0 h=0 I=0x05 l=1 p=0
<7>[67259.247851] [24278:AsyncTask #2] fork err at pid
<7>[67259.247884] [24278:AsyncTask #2] fork [24308:AsyncTask #2]
<7>[67259.254659] [24308:AsyncTask #2] set proc[24308] name: ->[dmesg]
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IML74K
ro.build.display.id=ALPS.ICS.MP.V1.11
ro.build.version.incremental=eng.root.1339502077
ro.custom.build.version=1339502077
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.3
ro.build.date=2012年 06月 12日 星期二 19:56:30 CST
ro.build.date.utc=1339502190
ro.build.type=user
ro.build.user=root
ro.build.host=agold-desktop
ro.build.tags=test-keys
ro.product.model=e1808_v75_jbl1
ro.product.brand=alps
ro.product.name=e1808_v75_jbl1
ro.product.device=e1808_v75_jbl1
ro.product.board=e1808_v75_jbl1
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=alps
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=e1808_v75_jbl1
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=e1808_v75_jbl1-user 4.0.3 IML74K eng.root.1339502077 test-keys
ro.build.fingerprint=alps/e1808_v75_jbl1/e1808_v75_jbl1:4.0.3/IML74K/1339502077:user/test-keys
ro.build.flavor=
persist.sys.timezone=
ro.build.characteristics=default
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=ALPS.ICS.MP.V1.11
ro.mediatek.platform=MT6575
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.ICS.MP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
# Encrypt phone function
ro.crypto.tmpfs_options=mode=0771,uid=1000,gid=1000
ro.crypto.fs_type=ext4
ro.crypto.fs_real_blkdev=/emmc@usrdata
ro.crypto.fs_mnt_point=/data
ro.crypto.fs_options=noauto_da_alloc
ro.crypto.fs_flags=0x00000406
# audio
ro.camera.sound.forced=0
ro.audio.silent=0
# USB Config Type
ro.sys.usb.storage.type=mtp,mass_storage
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.sf.hwrotation=0
ril.current.share_modem=2
launcherplus.allappsgrid=2d
launcher2.allappsgrid=3d_20
curlockscreen=2
ro.mediatek.gemini_support=true
drm.service.enabled=true
persist.radio.fd.counter=20
persist.radio.fd.off.counter=20
ro.config.notification_sound=Heaven.ogg
ro.config.alarm_alert=Beeps.mp3
ro.config.ringtone=ArgoNavis.ogg
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
wifi.supplicant_scan_interval=180
#
# Added by Android Tuner
#
dalvik.vm.heapstartsize=8m
debug.performance.tuning=1
mot.proximity.delay=25
persist.adb.notify=0
persist.sys.purgeable_assets=1
pm.sleep_mode=1
ro.config.nocheckin=1
ro.HOME_APP_ADJ=1
ro.kernel.android.checkjni=0
ro.lge.proximity.delay=25
ro.ril.disable.power.collapse=1
ro.telephony.call_ring.delay=800
video.accelerate.hw=1
windowsmgr.max_events_per_sec=150
windowsmgr.support_rotation_270=true
wlan 285284 0 - Live 0xbf1e3000 (P)
cfg80211 122425 0 - Live 0xbf1ba000
mtk_fm_priv 8909 0 - Live 0xbf1b4000 (P)
mt6620_fm_drv 111369 1 mtk_fm_priv, Live 0xbf18c000
mtk_stp_bt 39718 0 - Live 0xbf17f000
mtk_stp_gps 37190 0 - Live 0xbf172000
mtk_stp_uart 21669 1 - Live 0xbf169000 (P)
mtk_stp_wmt 343806 7 wlan,mtk_fm_priv,mt6620_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf108000 (P)
mtk_hif_sdio 18042 2 wlan,mtk_stp_wmt, Live 0xbf0ff000
devinfo 748 0 - Live 0xbf0fb000 (P)
sec 109563 0 - Live 0xbf0da000 (P)
mt6575_vcodec_kernel_driver 23817 2 - Live 0xbf0cf000 (P)
mt6575_m4u 108821 8 - Live 0xbf0ab000 (P)
ccmni 17214 0 - Live 0xbf0a2000 (P)
ccci 137954 15 ccmni, Live 0xbf075000 (P)
ccci_plat 125084 3 sec,ccmni,ccci, Live 0xbf04e000 (P)
mtk_drvb 5115 0 - Live 0xbf049000 (P)
mtklfb 14369 0 - Live 0xbf041000
pvrsrvkm 163615 157 mtklfb, Live 0xbf00d000
alps_core 2221 0 - Live 0xbf009000 (P)
aed 15834 3 - Live 0xbf000000 (P)
RAM: 512 MB (484 MB available)
System RAM: 484.000MB
mtkfb.0: 6.000MB
Flash: 4 GB (3.600 GB actual); 16 GB (14.539 GB actual)
mmcblk0: 3.600 GB
mmcblk1: 14.539 GB
Pantalla táctil para alps e1808_v75_jbl1
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin
$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft
$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
Batería de repuesto para alps e1808_v75_jbl1
$5.06 XBox One Elite Series 2 Controller 3D Analog Joystick ALPS original part 2PCS
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$0.25 Outemu otm gaote alps switch Clicky 30g Linear 60g like alps switches Matias switch for mechanical keyboards
$28 10PCS ALPS Original 3D Anolog For PS5 Joystick 3D Rocker Replacement For PlayStation 5 Controller Grip stick Sensor Module
$24.72 50pcs/lot Original for ALPS 3D Analog Joystick Button for Xboxone for Xbox One Controller Gamd Pad
$31.96 4PCs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$20.18 50PCS ALPS Original 3D Joystick for Xbox one Controller Repair Parts 3D Analog Sensor Module Joystick for Xbox one S / X
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$2.39 2pcs/lot ALPS Original OEM 3D Joystick for PS4 PS5 Controller Repair parts 3D analog stick for Xbox one
$17.06 50PCS Replacement 3D Analog Joystick Analogue Thumbstick For PS2 XBOX 360 ALPS Controller
$40.21 4pcs Original Replacement Alps F logo Analog Joystick 3D Thumb stick Axis Sensor Assembly Module Rocker For Xbox 360,PS3,PS2
$190.79 50pcs Original 3D Analog Joystick for Playstation 5 PS5 with ALPS 2.3k Thumbstick Sensor Module
$2.75 Original ALPS Mouse Encoder 11mm High Accurate ALPS 9mm for RAW G403 g603 g703 Solve the roller wheel problem Accessoires 2PCS
$9.36 20PCS ALPS Original 3D Joystick for Xbox one Controller Repair parts 3D analog stick for Xbox one s x series S X
$26.38 60pcs/tray for Xbox One/ Series ALPS Original 3D Joystick for PS4 PS5 Controller 3D Analog Stick Sensor Module Thumb Stick
$100.68 20pcs ALPS Hall Stick Potentiometer Replacement Trim Pot Resistor Thumbstick Module Sensor For PS5 Playstation 5 Joystick Repair
$23.36 2pcs ALPS Hall Stick Potentiometer Replacement Trim Pot Resistor Thumbstick Module Sensor For PS5 PS4 Xbox Nintendo Switch Pro
$60.97 10pcs ALPS Hall Stick Potentiometer Replacement Trim Pot Resistor Thumbstick Module Sensor For PS5 PS4 Xbox Nintendo Switch Pro
$4.12 50PCS For ALPS Joystick Potentiometers Sensor Module For PS5 Controllers 2K3Ω 3D Thumbstick Axis Resistors Repair Part
Fundas para alps e1808_v75_jbl1
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin
$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft
$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
Find Similar devices | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |