1. Install SpecDevice
2. Run and decode your specs
3. Get your link (read more...)
General Specifications | |
---|---|
Manufacturer | alps |
Model | GT-I9100 |
Firmware | 4.0.4; eng.scm.1348131974; SDK15 |
CPU | 2 cores; ARMv7 Processor rev 0 (v7l) MT77_H958_ICS; Max: 1001,0 MHz; Min: 250,2 MHz |
Display | 1280 x 720; DPI: 320; Evaluated Size: 4,6" |
Touch screen | Multitouch 5 points |
GPU | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.8@905891 |
RAM | 1024 MB (987 MB available) |
Flash | 4 GB (3.589 GB actual); 32 GB (29.628 GB actual) (see memory map tab) |
Communications | |
Phone | GSM, Dual SIM; Net: GPRS |
WiFi | wlan_mt6628; IEEE 802.11 b/g/n; 802.11 b/g/n; AP Mode |
USB Host | No |
Bluetooth | 3.0 |
GPS | Yes |
Advanced Features | |
Front camera | Photo: 8.0 MP; Max: 3264x2448; Focus: auto continuous-picture continuous-video macro infinity manual fullscan; Flash modes: auto on off torch |
Back camera | Photo: 3.1 MP; Max size: 2048x1536; Focus: infinity; No flash |
Sensors | AMI304 3-axis Magnetic Field sensor (Aichi Steel); range: 0...600; resolution: 0,002 (0%); power: 0,25mA; |
ADXL345 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; | |
CM3623 Proximity Sensor (Capella); range: 0...1; resolution: 1 (100%); power: 0,13mA; | |
CM3623 Light Sensor (Capella); range: 0...10240; resolution: 1 (0,01%); power: 0,13mA; | |
Vibrator | Yes |
Supported languages | 44; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Burmese; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
Battery | Technology: Li-ion; Voltage: 3635 |
FM radio | Supported by chipset |
SD Version: | 1.1 5 |
KERNEL: Linux version 3.0.13 (root@pengyang-desktop) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Fri Apr 12 11:39:18 CST 2013
CODENAME: REL
Mainboard: H958
BRAND: HKPHONE
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: Revo_max
DISPLAY: REVO S2 - SGS4 UI - (1-7-2013)
FINGERPRINT: UMI_X1/H932/H932:4.0.4/IMM76D/1348131974:user/test-keys
HARDWARE: mt6577
ID: IMM76D
TAGS: test-keys
Processor : ARMv7 Processor rev 0 (v7l)
processor : 0
BogoMIPS : 1993.93
processor : 1
BogoMIPS : 2000.48
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc09
CPU revision : 0
Hardware : MT6577
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<4>[10579.766747] (0)MYCAT dpi_esd_check result=0
<7>[10579.879529] (1)[12177:dmesg] exit
<7>[10579.879772] (1)[12177:dmesg] sig 17 to [12175:AsyncTask #2]
<7>[10579.948027] (1)[309:WifiStateMachin] fork [12178:WifiStateMachin]
<7>[10579.949350] (1)[12178:WifiStateMachin] set proc[12178] name: ->[loadDriverThrea]
<7>[10580.009534] (1)[268:er.ServerThread] fork [12179:er.ServerThread]
<7>[10580.013911] (1)[12179:er.ServerThread] set proc[12179] name: ->[Thread-509]
<7>[10580.020484] (1)[608:ificationToggle] fork [12180:ificationToggle]
<7>[10580.023045] (0)[12180:ificationToggle] set proc[12180] name: ->[IntentService[U]
<7>[10580.023405] (1)[12179:Thread-509] exit
<5>[10580.032802] (0)init: starting `insmod`
<7>[10580.033102] (0)[1:init] fork [12181:init]
<6>[10580.034451] (1)[WLAN] rfkill_set_block(blocked 0)
<6>[10580.034469] (1)[WLAN] Power on
<3>[10580.034491] (1)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[10580.034516] (1)[STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[10580.034623] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[10580.034642] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(not defined)
<3>[10580.034654] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO182)
<3>[10580.034664] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(not defined)
<3>[10580.034675] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[10580.034685] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO13)
<3>[10580.034695] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(14)
<3>[10580.034706] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO76)
<3>[10580.034716] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(18)
<3>[10580.034726] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<3>[10580.034737] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[10580.034748] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[10580.034759] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[10580.034770] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[10580.034780] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[10580.034790] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:FM digital mode is not set, no need for I2S GPIOs
<3>[10580.034802] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(GPIO72)
<3>[10580.034812] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(GPIO112)
<3>[10580.034822] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[10580.034836] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<3>[10580.034850] (0)[WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:ALL EINT not defined
<3>[10580.034863] (0)[WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[10580.034887] (0)[WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[10580.034902] (0)[WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<7>[10580.036407] (1)[12181:init] set proc[12181] name: ->[logwrapper]
<7>[10580.060534] (0)[12181:logwrapper] fork [12182:logwrapper]
<7>[10580.064817] (1)[12182:logwrapper] set proc[12182] name: ->[insmod]
<7>[10580.177342] (0)[12182:insmod] exit
<7>[10580.177596] (0)[12182:insmod] sig 17 to [12181:logwrapper]
<7>[10580.178035] (0)[12181:logwrapper] exit
<7>[10580.178341] (0)[12181:logwrapper] sig 17 to [1:init]
<5>[10580.178700] (0)init: process `insmod`, pid 12181 exited
<3>[10580.235771] (0)[WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[10580.235797] (0)[WMT-PLAT][I]wmt_plat_i2s_ctrl:[MT662x]warnning:FM digital mode is not set, no I2S GPIO settings should be modified by combo driver
<3>[10580.235812] (0)[WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<4>[10580.236004] (0)[STP-PSM] [E]_stp_psm_notify_stp(1147):ERROR! Invalid Action!!
<4>[10580.236010] (0)
<3>[10580.236047] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[10580.236060] (0)[WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[10580.236072] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<7>[10580.236683] (0)[476:iatek.bluetooth] fork [12183:iatek.bluetooth]
<4>[10580.237447] (0)mtk_get_bus_freq() return 260000
<3>[10580.237983] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[10580.238003] (0)Flush type = 4 Rx Queue
<3>[10580.238218] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[10580.238240] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[10580.238256] (0)[STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[10580.238265] (0)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[10580.238279] (0)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<6>[10580.238297] (0)[STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[10580.238310] (0)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[10580.238321] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[10580.238332] (0)[STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<7>[10580.242294] (1)[12183:iatek.bluetooth] set proc[12183] name: ->[BtFtpServiceThr]
<3>[10580.244464] (0)[WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6628)
<3>[10580.250189] (0)[WMT-IC][I]mt6628_ver_check:MT6628: read hw_ver (hw version) (0x8a10)
<3>[10580.255862] (0)[WMT-IC][I]mt6628_ver_check:MT6628: read fw_ver (rom version) (0x8a10)
<3>[10580.255882] (0)[WMT-IC][I]mt6628_find_wmt_ic_info:found ic info(0x8a10) by full match! index:1
<3>[10580.255897] (0)[WMT-IC][I]mt6628_ver_check:MT6628: wmt ic info: MT6628.E2 (0x8a10, WMTHWVER:1, patch_ext:_e2)
<3>[10580.255912] (0)[WMT-CORE][I]wmt_core_hw_check:chip id(0x6628) ver_check ok
<7>[10580.259571] (0)[608:ificationToggle] fork [12184:ificationToggle]
<7>[10580.264719] (1)[12184:ificationToggle] set proc[12184] name: ->[Thread-506]
<3>[10580.268222] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[10580.268242] (0)[WMT-IC][I]mt6628_sw_init:WMT-CORE: change baudrate(4000000) ok
<7>[10580.294232] (1)[12184:Thread-506] exit
<3>[10580.296874] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(srh_patch) result(0)
<3>[10580.296899] (0)[WMT-IC][I]mt6628_patch_dwn:valid patch found: (/system/etc/firmware//mt6628_patch_e2_hdr.bin)
<3>[10580.303919] (1)[WMT-IC][I]mt6628_patch_dwn:===========================================
<3>[10580.303938] (1)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Built Time = 20120727130622a
<3>[10580.303950] (1)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[10580.303961] (1)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[10580.303971] (1)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Ph Ver = 0x0010
<3>[10580.303982] (1)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Platform = 1226
<3>[10580.303992] (1)[WMT-IC][I]mt6628_patch_dwn:===========================================
<7>[10580.410861] (0)[12180:IntentService[U] exit
<7>[10580.419739] (0)[12164:Thread-539] exit
<7>[10580.443668] (0)[12171:Thread-540] exit
<3>[10580.449946] (1)[WMT-IC][I]mt6628_patch_dwn:wmt_core: patch dwn:0 frag(21, 472) ok
<3>[10580.450664] (1)[WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf14a938)
<3>[10580.453580] (0)[WMT-IC][I]mt6628_sw_init:init_coex ok
<6>[10580.455888] (0)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[10580.455907] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[10580.455921] (0)[STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[10580.455932] (0)[WMT-IC][I]mt6628_sw_init:enable host STP-UART-FULL mode
<3>[10580.478236] (0)[WMT-IC][I]mt6628_sw_init:co-clock disabled.
<3>[10580.479195] (0)[WMT-IC][I]mt6628_sw_init:set fm mode (2) ok
<3>[10580.479211] (0)[WMT-IC][I]mt6628_sw_init:disable mt662x firmware coredump
<6>[10580.479225] (0)[STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[10580.479239] (0)[STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[10580.479254] (0)mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[10580.479263] (0)board_sdio_ctrl force off before on
<6>[10580.479271] (0)mtk_wcn_cmb_sdio_off (3)
<5>[10580.479321] (0)[Power/clkmgr] [freq_meter] data = 139, freq = 1 MHz
<5>[10580.479345] (0)[Power/clkmgr] [freq_meter] data = 42, freq = 0 MHz
<6>[10580.479363] (0)mtk_wcn_cmb_sdio_on (3)
<5>[10580.479476] (0)[Power/clkmgr] [freq_meter] data = 15494, freq = 196 MHz
<3>[10580.479495] (0)msdc3 -> USR Resume <- msdc_pm() : L<1740> PID
<3>[10580.495939] (0)msdc3 -> ================ <- msdc_set_mclk() : L<976> PID
<3>[10580.495963] (0)msdc3 -> !!! Set<400KHz> Source<197000KHz> -> sclk<397KHz> DDR<0> mode<0> div<124> <- msdc_set_mclk() : L<978> PID
<3>[10580.495978] (0)msdc3 -> ================ <- msdc_set_mclk() : L<979> PID
<3>[10580.521460] (0)msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1810> PID
<7>[10580.525815] (0)WQ_WARN: cpu:0, proc:kworker/0:1, [thermal_zone_device_check+0x0/0x18]dur: 309913693 > 15ms
<3>[10580.537514] (0)msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<4139> PID
<3>[10580.537565] (0)msdc3 -> ================ <- msdc_set_mclk() : L<976> PID
<3>[10580.537590] (0)msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<978> PID
<3>[10580.537613] (0)msdc3 -> ================ <- msdc_set_mclk() : L<979> PID
<6>[10580.539675] (0)mmc2: new high speed SDIO card at address 0001
<6>[10580.542390] (0)[WMT-DFT][I]hif_sdio_probe:start!
<6>[10580.542412] (0)[WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x6628) num(0x1)
<6>[10580.542427] (0)[WMT-DFT][I]hif_sdio_probe:card->info[0]: 6628
<6>[10580.542440] (0)[WMT-DFT][I]hif_sdio_probe:card->info[1]: Combo
<6>[10580.542453] (0)[WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[10580.542470] (0)[WMT-DFT][I]hif_sdio_probe:card->info[3]:
<6>[10580.542661] (0)[WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(524288)
<7>[10580.542724] (0)WQ_WARN: cpu:4, proc:kworker/u:4, [mmc_rescan+0x0/0x324]dur: 62070077 > 15ms
<7>[10580.601090] (0)[608:ificationToggle] fork [12185:ificationToggle]
<7>[10580.601860] (1)[12185:ificationToggle] set proc[12185] name: ->[IntentService[U]
<7>[10580.634984] (1)[12185:IntentService[U] exit
<6>[10580.635805] (1)[WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[10580.636001] (1)[2:kthreadd] fork [12186:kthreadd]
<6>[10580.637737] (0)[WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<5>[10580.637792] (0)[wlan] net_device prDev(0xc5014000) allocated
<4>[10580.638532] (0)[RT_MONITOR]WARNNING [12186:ksdioirqd/mmc2] SET NOT ALLOW RT Prio [1] for proc [12186:ksdioirqd/mmc2]
<5>[10580.641963] (0)[wlan] Open FW image: WIFI_RAM_CODE done
<5>[10580.649192] (0)[wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[10580.649412] (0)[wlan] Virtual Address = e7625000 for COMMON MGMT MEMORY POOL.
<5>[10580.649432] (0)[wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[10580.649474] (0)[wlan] Virtual Address = e7627000 for SW_RFB_T.
<5>[10580.649488] (0)[wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[10580.649519] (0)[wlan] Virtual Address = e762b000 for MSDU_INFO_T.
<6>[10580.649537] (0)[wlan] wlanAdapterStart(): Acquiring LP-OWN
<7>[10580.660751] (1)[608:ificationToggle] fork [12187:ificationToggle]
<7>[10580.661936] (1)[12187:ificationToggle] set proc[12187] name: ->[IntentService[U]
<6>[10580.667740] (1)[wlan] Chip ID: 0x6628
<6>[10580.667760] (1)[wlan] Revision ID: 0x0
<7>[10580.743933] (1)[12187:IntentService[U] exit
<7>[10581.143818] (1)[608:ificationToggle] fork [12188:ificationToggle]
<7>[10581.144464] (0)[12188:ificationToggle] set proc[12188] name: ->[IntentService[U]
<7>[10581.210109] (1)[12188:IntentService[U] exit
<6>[10581.424089] (0)[wlan] wlanAdapterStart(): Waiting for Ready bit..
<6>[10581.435780] (0)[wlan] Ready bit asserted
<5>[10581.472117] (0)[wlan] RF CAL FAIL = (0),BB CAL FAIL = (0)
<5>[10581.473146] (0)[wlan] [wifi] wlan%d netif_carrier_off
<6>[10581.473176] (0)[wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[10581.474538] (0)[wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[10581.474673] (0)[wlan] Domain: map=0, idx=1, code=0x0000
<7>[10581.475209] (1)[2:kthreadd] fork [12189:kthreadd]
<5>[10581.475239] (0)[wlan] tx_thread starts running...
<6>[10581.557306] (0)[WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(6628) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[10581.557358] (0)[WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[10581.557419] (0)[WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 coredump:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[10581.558875] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<3>[10581.558978] (0)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<4>[10581.559433] (0)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<7>[10581.562764] (0)[12178:loadDriverThrea] exit
<6>[10581.601902] (0)[RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[10581.601951] (0)ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[10581.614027] (1)[608:ificationToggle] fork [12190:ificationToggle]
<7>[10581.614152] (0)[12190:ificationToggle] set proc[12190] name: ->[IntentService[U]
<7>[10581.617004] (0)WQ_WARN: cpu:0, proc:kworker/0:4, [wlanSetMulticastListWorkQueue+0x0/0x1f4 [wlan_mt6628]]dur: 16748615 > 15ms
<5>[10581.617431] (0)init: starting `wpa_supplicant`
<7>[10581.617794] (0)[1:init] fork [12191:init]
<7>[10581.618576] (1)[12191:init] set proc[12191] name: ->[logwrapper]
<7>[10581.620365] (0)[309:WifiStateMachin] fork [12192:WifiStateMachin]
<7>[10581.621581] (1)[12191:logwrapper] fork [12193:logwrapper]
<7>[10581.621938] (1)[12192:WifiStateMachin] set proc[12192] name: ->[WifiMonitor]
<7>[10581.624847] (0)[12193:logwrapper] set proc[12193] name: ->[wpa_supplicant]
<7>[10581.647177] (1)[12190:IntentService[U] exit
<5>[10581.726124] (0)[wlan] N=0 closed
<5>[10581.726148] (0)[wlan] EVENT-ROAMING ABORT: Current Time = 9377450
<5>[10581.726163] (0)[wlan] [13] TRANSITION: [0] -> [0]
<6>[10581.726713] (0)[wlan] NAF=0,0,0
<6>[10581.726875] (0)[wlan] NAF=0,0,0
<4>[10581.783388] (0)MYCAT dpi_esd_check result=0
<7>[10581.835887] (0)WQ_WARN: cpu:0, proc:kworker/0:1, [thermal_zone_device_check+0x0/0x18]dur: 310117846 > 15ms
<5>[10581.954105] (1)[wlan] [13] TRANSITION: [0] -> [2]
<7>[10581.976302] (1)[608:ificationToggle] fork [12194:ificationToggle]
<7>[10581.976540] (1)[12194:ificationToggle] set proc[12194] name: ->[Thread-511]
<7>[10581.977886] (1)[12194:Thread-511] exit
<7>[10581.993902] (1)[608:ificationToggle] fork [12195:ificationToggle]
<7>[10581.993966] (0)[12195:ificationToggle] set proc[12195] name: ->[IntentService[U]
<5>[10582.006196] (1)[wlan] CMD set_band=0
<7>[10582.021113] (0)[12195:IntentService[U] exit
<7>[10582.026092] (1)[12168:com.specdevice] exit
<7>[10582.081952] (0)[608:ificationToggle] fork [12196:ificationToggle]
<7>[10582.082115] (1)[12196:ificationToggle] set proc[12196] name: ->[IntentService[U]
<7>[10582.115816] (1)[12196:IntentService[U] exit
<7>[10582.122267] (1)[12175:AsyncTask #2] fork [12197:AsyncTask #2]
<7>[10582.143254] (1)[12197:AsyncTask #2] set proc[12197] name: ->[dmesg]
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IMM76D
ro.build.display.id=REVO S2 - SGS4 UI - (1-7-2013)
ro.build.version.incremental=eng.scm.1348131974
ro.custom.build.version=1348131974
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=Thu Sep 25 17:06:59 CST 2012
ro.build.date.utc=1348132019
ro.build.type=user
ro.build.user=scm
ro.build.host=vanzo66
ro.build.tags=test-keys
ro.product.model=GT-I9100
ro.product.brand=HKPHONE
ro.product.name=H958
ro.product.device=Revo_max
ro.product.board=H958
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=alps
ro.product.locale.language=ru
ro.product.locale.region=RU
ro.wifi.channels=
ro.board.platform=MT77_H958_ICS
# ro.build.product is obsolete; use ro.product.device
ro.build.product=H958
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=H932-user 4.0.4 IMM76D eng.scm.1348131974 test-keys
ro.build.fingerprint=UMI_X1/H932/H932:4.0.4/IMM76D/1348131974:user/test-keys
ro.build.flavor=mt77_h958_v11_vinus_ics
ro.build.characteristics=default
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=ALPS.ICS2.MP.V1
ro.mediatek.platform=MT6577
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.ICS2.MP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=128m
# Encrypt phone function
ro.crypto.tmpfs_options=mode=0771,uid=1000,gid=1000
ro.crypto.fs_type=ext4
ro.crypto.fs_real_blkdev=/emmc@usrdata
ro.crypto.fs_mnt_point=/data
ro.crypto.fs_options=noauto_da_alloc
ro.crypto.fs_flags=0x00000406
# USB MTP WHQL
ro.sys.usb.mtp.whql.enable=0
# Power off opt in IPO
sys.ipo.pwrdncap=2
ro.sys.usb.storage.type=mtp,mass_storage
# Vanzo:zhouyanjiang on: Mon, 28 May 2012 18:12:13 +0800
# TODO: support QQ2012
#
ro.media.enc.camera.platform=Mediatek
# End of Vanzo: zhouyanjiang
#
# ADDITIONAL_BUILD_PROPERTIES
#
bird.updatezip.code=BIRD
fmradio.driver.chip=3
ro.sf.hwrotation=180
ril.current.share_modem=2
ro.tool.specialfactoryreset=yes
launcherplus.allappsgrid=2d
launcher2.allappsgrid=3d_20
curlockscreen=1
ro.mediatek.gemini_support=true
persist.radio.fd.counter=20
persist.radio.fd.off.counter=20
drm.service.enabled=true
fmradio.driver.enable=1
mediatek.wlan.chip=MT6628
mediatek.wlan.module.postfix=_mt6628
ro.bird.control.naviBar=
persist.sys.naviBar=
ro.naviBar.height=
ro.facelock.support=true
ro.bird.statusbar.iphone=
ro.bird.statusbar.alpha=
ro.lockscr.vibrate.value=50
ro.vikey.vibrate.value=0;30;40;50
ro.longpress.vibrate.value=0;20;30;40
dalvik.vm.mtk-stack-trace-file=/data/anr/mtk_traces.txt
ro.config.notification_sound=pixiedust.ogg
ro.config.alarm_alert=Walk_in_the_forest.ogg
ro.config.ringtone=07_Rain_drops.ogg
persist.sys.timezone=Europe/Moscow
net.bt.name=REVO_S2
ro.init.screen_brightness=255
persist.service.adb.enable=1
ro.setupwizard.mode=DISABLED
dalvik.vm.stack-trace-file=/data/anr/traces.txt
#############add by haiduongbk#################
ro.init.ringtone_vol=15
ro.init.alarm_vol=15
ro.init.music_vol=15
ro.init.screen_brightness=175
# Improves audio and video recording quality
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.jpeg.quality=100
ro.media.capture.maxres=8m
ro.media.capture.fast.fps=4
ro.media.capture.slow.fps=120
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
# Disables error checking
ro.kernel.checkjni=0
ro.kernel.android.checkjni=0
ro.mot.buttonlight.timeout=0
ro.min_pointer_dur=1
persist.service.pcsync.enable=0
user.feature.flex=true
user.feature.ls_event=false
user.feature.ls_normal=false
user.feature.sui=false
ro.cdma.nbpcd=1
persist.sys.use_16bpp_alpha=1
keyguard.no_require_sim=true
ro.com.android.dateformat=dd-MM-yyyy
# Disable anonymous logs
ro.config.nocheckin=1
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# enable data roaming
ro.com.android.dataroaming = true
# For enable Kernel sync time with radio
ro.ril.enable.sync.time = 1
#Disable USB Debugging notify
persist.adb.notify=0
# Following property will be reference by Settings.
ro.product.processor=1GHz MediaTek MT6577
ro.product.ram=512MB
ro.product.display_resolution=5.3 inch QHD resolution
ro.product.main_camera= 8M
ro.product.front_camera=0.3M
ro.product.bluetooth = 3.0
ro.product.wifi = 802.11 b/g/n
ro.ril.def.agps.mode = 2
# Video acceleration and HW debugging
debug.performance.tuning=1
video.accelerate.hw=1
debug.sf.hw=1
debug.egl.profiler=1
debug.egl.hw=1
debug.composition.type=gpu
# Faster streaming videos
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-record=false
# Better net speeds
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
# No Delay In Making Call
ro.telephony.call_ring.delay=0
ring.delay=0
# Battery Tweaks
ro.mot.deep.sleep.supported=true
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
ro.ril.power_collapse=1
wifi.supplicant_scan_interval=180
ro.ril.fast.dormancy.rule=0
# Proximity Tweaks
ro.lge.proximity.delay=25
mot.proximity.delay=25
# Frees More RAM
persist.sys.purgeable_assets=1
# Signal Tweaks
ro.ril.enable.amr.wideband=1
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
ro.ril.hsxpa=3
ro.ril.gprsclass=12
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=8
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=6
# Better Responsiveness & Speed
windowsmgr.max_events_per_sec=90
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
# Lock App In Memory
# sys.keep_app_1=com.your.app.app
# Other Tweaks
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
dalvik.vm.execution-mode=int:jit
dalvik.vm.verify-bytecode = false
dalvik.vm.dexopt-flags=v=n,o=v
#Disable strict mode checking.
persist.android.strictmode=0
# Faster boot
ro.config.hw_quickpoweron=true
# Enable Surface Dithering Which Will Raise Image Quality At The Cost Of Performances - 1=ON;0=OFF
persist.sys.use_dithering=0
# Remove FPS cap
debug.gr.swapinterval=0
#
# Experimental Tweaks
#
#touch.presure.scale=0.001
#ro.min_pointer_dur=8
#ro.media.enc.hprof.vid.fps=65
# No BootAnimation For Faster Reboot - Remove # Below To Enable
#debug.sf.nobootanimation=1
# May Improve Pictures - Remove # Below To Enable
#ro.media.cam.preview.fps=0
ro.sf.lcd_density=320
wlan_mt6628 285691 0 - Live 0xbf1fa000 (P)
cfg80211 122192 0 - Live 0xbf1d1000
mtk_fm_priv 2399 0 - Live 0xbf1cd000 (P)
mtk_fm_drv 98553 1 mtk_fm_priv, Live 0xbf1ad000
mtk_stp_bt 39986 0 - Live 0xbf1a0000
mtk_stp_gps 37294 0 - Live 0xbf193000
mtk_stp_uart 21589 0 - Live 0xbf18a000 (P)
mtk_stp_wmt 372467 8 wlan_mt6628,mtk_fm_priv,mtk_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf121000 (P)
mtk_hif_sdio 18482 2 wlan_mt6628,mtk_stp_wmt, Live 0xbf118000
devinfo 840 0 - Live 0xbf114000 (P)
devapc 4553 0 - Live 0xbf10f000 (P)
sec 90381 0 - Live 0xbf0f2000 (P)
vcodec_kernel_driver 42994 0 - Live 0xbf0e2000 (P)
m4u 113423 22 - Live 0xbf0bd000 (P)
ccmni 17150 0 - Live 0xbf0b4000 (P)
ccci 117176 15 ccmni, Live 0xbf08c000 (P)
ccci_plat 127206 2 ccmni,ccci, Live 0xbf063000 (P)
mtk_drvb_77 6081 0 - Live 0xbf05e000 (P)
mtklfb 23586 0 - Live 0xbf054000
pvrsrvkm 233143 133 mtklfb, Live 0xbf00d000
mtk_hwe 1386 0 - Live 0xbf009000 (P)
aed 16384 3 - Live 0xbf000000 (P)
RAM: 1024 MB (987 MB available)
System RAM: 987.000MB
mtkfb.0: 15.000MB
Flash: 4 GB (3.589 GB actual); 32 GB (29.628 GB actual)
mmcblk0: 3.589 GB
mmcblk1: 29.628 GB
Touch Screen for alps GT-I9100
$5.06 XBox One Elite Series 2 Controller 3D Analog Joystick ALPS original part 2PCS
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$28 10PCS ALPS Original 3D Anolog For PS5 Joystick 3D Rocker Replacement For PlayStation 5 Controller Grip stick Sensor Module
$0.25 Outemu otm gaote alps switch Clicky 30g Linear 60g like alps switches Matias switch for mechanical keyboards
$24.72 50pcs/lot Original for ALPS 3D Analog Joystick Button for Xboxone for Xbox One Controller Gamd Pad
$31.96 4PCs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$17.06 50PCS Replacement 3D Analog Joystick Analogue Thumbstick For PS2 XBOX 360 ALPS Controller
$2.39 2pcs/lot ALPS Original OEM 3D Joystick for PS4 PS5 Controller Repair parts 3D analog stick for Xbox one
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$20.18 50PCS ALPS Original 3D Joystick for Xbox one Controller Repair Parts 3D Analog Sensor Module Joystick for Xbox one S / X
$190.79 50pcs Original 3D Analog Joystick for Playstation 5 PS5 with ALPS 2.3k Thumbstick Sensor Module
$40.21 4pcs Original Replacement Alps F logo Analog Joystick 3D Thumb stick Axis Sensor Assembly Module Rocker For Xbox 360,PS3,PS2
$2.75 Original ALPS Mouse Encoder 11mm High Accurate ALPS 9mm for RAW G403 g603 g703 Solve the roller wheel problem Accessoires 2PCS
$9.36 20PCS ALPS Original 3D Joystick for Xbox one Controller Repair parts 3D analog stick for Xbox one s x series S X
$26.38 60pcs/tray for Xbox One/ Series ALPS Original 3D Joystick for PS4 PS5 Controller 3D Analog Stick Sensor Module Thumb Stick
$100.68 20pcs ALPS Hall Stick Potentiometer Replacement Trim Pot Resistor Thumbstick Module Sensor For PS5 Playstation 5 Joystick Repair
$4.12 50PCS For ALPS Joystick Potentiometers Sensor Module For PS5 Controllers 2K3Ω 3D Thumbstick Axis Resistors Repair Part
$23.92 2pcs ALPS Hall Stick Potentiometer Replacement Trim Pot Resistor Thumbstick Module Sensor For PS5 PS4 Xbox Nintendo Switch Pro
$60.97 10pcs ALPS Hall Stick Potentiometer Replacement Trim Pot Resistor Thumbstick Module Sensor For PS5 PS4 Xbox Nintendo Switch Pro
Replacement Battery for alps GT-I9100
$5.06 XBox One Elite Series 2 Controller 3D Analog Joystick ALPS original part 2PCS
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$28 10PCS ALPS Original 3D Anolog For PS5 Joystick 3D Rocker Replacement For PlayStation 5 Controller Grip stick Sensor Module
$24.72 50pcs/lot Original for ALPS 3D Analog Joystick Button for Xboxone for Xbox One Controller Gamd Pad
$0.25 Outemu otm gaote alps switch Clicky 30g Linear 60g like alps switches Matias switch for mechanical keyboards
$31.96 4PCs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$20.18 50PCS ALPS Original 3D Joystick for Xbox one Controller Repair Parts 3D Analog Sensor Module Joystick for Xbox one S / X
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$2.39 2pcs/lot ALPS Original OEM 3D Joystick for PS4 PS5 Controller Repair parts 3D analog stick for Xbox one
$17.06 50PCS Replacement 3D Analog Joystick Analogue Thumbstick For PS2 XBOX 360 ALPS Controller
$190.79 50pcs Original 3D Analog Joystick for Playstation 5 PS5 with ALPS 2.3k Thumbstick Sensor Module
$40.21 4pcs Original Replacement Alps F logo Analog Joystick 3D Thumb stick Axis Sensor Assembly Module Rocker For Xbox 360,PS3,PS2
$2.75 Original ALPS Mouse Encoder 11mm High Accurate ALPS 9mm for RAW G403 g603 g703 Solve the roller wheel problem Accessoires 2PCS
$9.36 20PCS ALPS Original 3D Joystick for Xbox one Controller Repair parts 3D analog stick for Xbox one s x series S X
$26.38 60pcs/tray for Xbox One/ Series ALPS Original 3D Joystick for PS4 PS5 Controller 3D Analog Stick Sensor Module Thumb Stick
$100.68 20pcs ALPS Hall Stick Potentiometer Replacement Trim Pot Resistor Thumbstick Module Sensor For PS5 Playstation 5 Joystick Repair
$4.12 50PCS For ALPS Joystick Potentiometers Sensor Module For PS5 Controllers 2K3Ω 3D Thumbstick Axis Resistors Repair Part
$23.92 2pcs ALPS Hall Stick Potentiometer Replacement Trim Pot Resistor Thumbstick Module Sensor For PS5 PS4 Xbox Nintendo Switch Pro
$60.97 10pcs ALPS Hall Stick Potentiometer Replacement Trim Pot Resistor Thumbstick Module Sensor For PS5 PS4 Xbox Nintendo Switch Pro
Cover Cases for alps GT-I9100
$24.72 50pcs/lot Original for ALPS 3D Analog Joystick Button for Xboxone for Xbox One Controller Gamd Pad
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$0.25 Outemu otm gaote alps switch Clicky 30g Linear 60g like alps switches Matias switch for mechanical keyboards
$28 10PCS ALPS Original 3D Anolog For PS5 Joystick 3D Rocker Replacement For PlayStation 5 Controller Grip stick Sensor Module
$5.06 XBox One Elite Series 2 Controller 3D Analog Joystick ALPS original part 2PCS
$31.96 4PCs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$2.39 2pcs/lot ALPS Original OEM 3D Joystick for PS4 PS5 Controller Repair parts 3D analog stick for Xbox one
$20.18 50PCS ALPS Original 3D Joystick for Xbox one Controller Repair Parts 3D Analog Sensor Module Joystick for Xbox one S / X
$17.06 50PCS Replacement 3D Analog Joystick Analogue Thumbstick For PS2 XBOX 360 ALPS Controller
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$40.21 4pcs Original Replacement Alps F logo Analog Joystick 3D Thumb stick Axis Sensor Assembly Module Rocker For Xbox 360,PS3,PS2
$190.79 50pcs Original 3D Analog Joystick for Playstation 5 PS5 with ALPS 2.3k Thumbstick Sensor Module
$2.75 Original ALPS Mouse Encoder 11mm High Accurate ALPS 9mm for RAW G403 g603 g703 Solve the roller wheel problem Accessoires 2PCS
$9.36 20PCS ALPS Original 3D Joystick for Xbox one Controller Repair parts 3D analog stick for Xbox one s x series S X
$26.38 60pcs/tray for Xbox One/ Series ALPS Original 3D Joystick for PS4 PS5 Controller 3D Analog Stick Sensor Module Thumb Stick
$100.68 20pcs ALPS Hall Stick Potentiometer Replacement Trim Pot Resistor Thumbstick Module Sensor For PS5 Playstation 5 Joystick Repair
$60.97 10pcs ALPS Hall Stick Potentiometer Replacement Trim Pot Resistor Thumbstick Module Sensor For PS5 PS4 Xbox Nintendo Switch Pro
$23.92 2pcs ALPS Hall Stick Potentiometer Replacement Trim Pot Resistor Thumbstick Module Sensor For PS5 PS4 Xbox Nintendo Switch Pro
$4.12 50PCS For ALPS Joystick Potentiometers Sensor Module For PS5 Controllers 2K3Ω 3D Thumbstick Axis Resistors Repair Part
Find Similar devices | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |