alps e1911_v77_jbaol_g20mt9p017

类似的装置在数据库中是: Chinese ONE X+ MTK6577

一般规格
生产厂家alps
型号e1911_v77_jbaol_g20mt9p017
Android版4.0.4; eng.root.1348744929; SDK15
中央处理单元2 cores; ARMv7 Processor rev 0 (v7l); Max: 1001,0 MHz; Min: 250,2 MHz
显示960 x 540; DPI: 240; Evaluated Size: 4,6"
触摸屏Multitouch 5 points
图形处理器PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.8@905891
内存RAM512 MB (482 MB available)
快闪记忆体4 GB (3.616 GB actual); 16 GB (14.410 GB actual) (见存储器映射选项卡)
沟通
电话GSM, Dual SIM; Net: GPRS
WiFiwlan_mt6620; IEEE 802.11 a/b/g/n; MediaTek MT6620; AP Mode
USB主机No
蓝牙Bluetooth 4.0+HS
全球定位系统Yes
高级功能
前置摄像头Photo: 8.0 MP; Max: 3264x2448; Focus: auto continuous-picture continuous-video macro infinity manual fullscan; Flash modes: auto on off torch
背照相机Photo: 0.3 MP; Max size: 640x480; Focus: infinity; No flash
传感器yamaha530 3-axis Magnetic Field sensor (Aichi Steel); range: 0...600; resolution: 0,002 (0%); power: 0,25mA;
bma222 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA;
tmd2771 Proximity Sensor (Capella); range: 0...1; resolution: 1 (100%); power: 0,13mA;
tmd2771 Light Sensor (Capella); range: 0...10240; resolution: 1 (0,01%); power: 0,13mA;
震动模式Yes
支持的语言43; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese
电池Technology: Li-ion; Voltage: 3725
FM radio76MHz to 108MHz + Transmitter
SD Version:1.1 5

KERNEL: Linux version 3.0.13 (root@bahe8-desktop) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Thu Sep 27 19:21:52 CST 2012
CODENAME: REL
Mainboard: e1911_v77_jbaol_g20mt9p017
BRAND: alps
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: e1911_v77_jbaol_g20mt9p017
DISPLAY: ALPS.ICS2.MP.V1.5
FINGERPRINT: unknown
HARDWARE: mt6577
ID: IMM76D
TAGS: test-keys

Processor : ARMv7 Processor rev 0 (v7l)
processor : 0
BogoMIPS : 1993.93
processor : 1
BogoMIPS : 2000.48
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc09
CPU revision : 0
Hardware : MT6577
Revision : 65fb8a00
Serial : 0000000000000000

GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture

<7>[45167.122892] (0)[25297:dmesg] exit
<7>[45167.123349] (0)[25297:dmesg] sig 17 to [25292:AsyncTask #3]
<7>[45167.228997] (0)[299:WifiStateMachin] fork [25298:WifiStateMachin]
<7>[45167.234489] (0)[25298:WifiStateMachin] set proc[25298] name: ->[loadDriverThrea]
<6>[45167.238376] (1)[WLAN] rfkill_set_block(blocked 0)
<6>[45167.238388] (1)[WLAN] Power on
<3>[45167.238405] (1)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[45167.238427] (1)[STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[45167.238489] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[45167.238503] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(not defined)
<3>[45167.238514] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO124)
<3>[45167.238524] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(not defined)
<3>[45167.238535] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[45167.238545] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO185)
<3>[45167.238555] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(14)
<3>[45167.238566] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO184)
<3>[45167.238576] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(11)
<3>[45167.238587] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<3>[45167.238597] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[45167.238607] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[45167.238617] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[45167.238627] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[45167.238637] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[45167.238647] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_CK(not defined)
<3>[45167.238656] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_WS(not defined)
<3>[45167.238666] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_DAT(not defined)
<3>[45167.238677] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(GPIO206)
<3>[45167.238686] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(not defined)
<3>[45167.238697] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[45167.238723] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<3>[45167.238736] (0)[WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[45167.238758] (0)[WMT-PLAT][W]wmt_plat_gps_lna_ctrl:host gps lna pin not defined!!!
<3>[45167.238769] (0)[WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<7>[45167.273622] (1)[255:er.ServerThread] fork [25299:er.ServerThread]
<7>[45167.274910] (1)[25299:er.ServerThread] set proc[25299] name: ->[Thread-845]
<7>[45167.276684] (0)[ccci/net] CCMNI0 open
<7>[45167.276804] (1)[25299:Thread-845] exit
<6>[45167.276843] (0)[RTlog insert] fib_netdev_event() ccmni0 NETDEV_UP!
<6>[45167.277017] (0)[RTlog insert] fib_inetaddr_event() ccmni0 NETDEV_UP!
<3>[45167.279699] (0)init: sys_prop: permission denied uid:1001 name:net.ccmni0.local-ip
<3>[45167.279957] (0)init: sys_prop: permission denied uid:1001 name:net.ccmni0.gw
<3>[45167.281456] (0)init: sys_prop: permission denied uid:1001 name:net.ccmni0.dns1
<3>[45167.281668] (0)init: sys_prop: permission denied uid:1001 name:net.ccmni0.dns2
<3>[45167.281829] (0)init: sys_prop: permission denied uid:1001 name:net.ccmni0.ipv6.dns1
<3>[45167.281988] (0)init: sys_prop: permission denied uid:1001 name:net.ccmni0.ipv6.dns2
<6>[45167.316318] (0)<< [RTlog info] ip_rt_ioctl rt.flags =00000005
<6>[45167.316333] (0)[RTlog info] ip_rt_ioctl rt.dev =ccmni0
<6>[45167.316353] (0)[RTlog info] ip_rt_ioctl rt.rt_dst =3f52a09f
<6>[45167.316361] (0)[RTlog info] ip_rt_ioct rt.rt_gateway =00000000
<6>[45167.316372] (0)[RTlog insert] p_rt_ioctl: cmd == SIOCADDRT! >>
<6>[45167.326676] (1)<< [RTlog info] ip_rt_ioctl rt.flags =00000003
<6>[45167.326689] (1)[RTlog info] ip_rt_ioctl rt.dev =ccmni0
<6>[45167.326697] (1)[RTlog info] ip_rt_ioctl rt.rt_dst =00000000
<6>[45167.326705] (1)[RTlog info] ip_rt_ioct rt.rt_gateway =3f52a09f
<6>[45167.326723] (1)[RTlog insert] p_rt_ioctl: cmd == SIOCADDRT! >>
<3>[45167.447519] (0)[WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[45167.447543] (0)[WMT-PLAT][E]wmt_plat_i2s_ctrl(995):[MT6620]Error:FM digital mode set, but no I2S GPIOs defined
<3>[45167.447555] (0)[WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<3>[45167.447743] (0)[WMT-LIB][I]wmt_lib_ps_handler:MT6620 Not Ready, Dont Send Sleep/Wakeup Command
<4>[45167.447758] (0)[STP-PSM] [E]_stp_psm_notify_stp(1137):ERROR! Invalid Action!!
<4>[45167.447764] (0)
<3>[45167.447796] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[45167.447813] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<4>[45167.448044] (1)mtk_get_bus_freq() return 192400
<3>[45167.448207] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[45167.448219] (0)Flush type = 4 Rx Queue
<3>[45167.448361] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[45167.448376] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[45167.448389] (0)[STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[45167.448399] (0)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[45167.448410] (0)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<6>[45167.448425] (0)[STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[45167.448436] (0)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[45167.448446] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[45167.448457] (0)[STP] mtk_wcn_stp_assert:[I] set f/w assert (0)
<3>[45167.454003] (0)[WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6620)
<3>[45167.459556] (0)[WMT-IC][I]mt6620_ver_check:MT6620: read hw_ver (hw version) (0x8a11)
<3>[45167.465112] (0)[WMT-IC][I]mt6620_ver_check:MT6620: read fw_ver (rom version) (0x8a10)
<3>[45167.465130] (0)[WMT-IC][I]mt6620_find_wmt_ic_info:found ic info(0x8a11) by full match! index:3
<3>[45167.465145] (0)[WMT-IC][I]mt6620_ver_check:MT6620: wmt ic info: MT6620.E4 (0x8a11, WMTHWVER:3, patch_ext:_e3)
<3>[45167.465160] (0)[WMT-CORE][I]wmt_core_hw_check:chip id(0x6620) ver_check ok
<3>[45167.476309] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[45167.476327] (0)[WMT-IC][I]mt6620_sw_init:WMT-CORE: change baudrate(4000000) ok
<3>[45167.478159] (0)[WMT-IC][I]mt6620_update_patch_name:full firmware patch name: /system/etc/firmware/mt6620_patch_e3_hdr.bin
<3>[45167.481464] (0)[WMT-IC][I]mt6620_patch_dwn:===========================================
<3>[45167.481484] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Built Time = 20120628171317
<3>[45167.481496] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[45167.481507] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[45167.481518] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Ph Ver = 0x001d
<3>[45167.481528] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Platform = 1226
<3>[45167.481539] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Content Size = 0xa724
<3>[45167.482029] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Content CRC = 0x483a
<3>[45167.482041] (0)[WMT-IC][I]mt6620_patch_dwn:===========================================
<7>[45167.528829] (1)[25300:netd] set proc[25300] name: ->
<7>[45167.528841] (0)[159:netd] fork [25300:netd]
<4>[45167.528851] (1)[iptables]
<7>[45167.536383] (1)[25300:iptables] exit
<7>[45167.536586] (1)[25300:iptables] sig 17 to [159:netd]
<7>[45167.538656] (0)[25301:netd] set proc[25301] name: ->
<7>[45167.538668] (1)[159:netd] fork [25301:netd]
<4>[45167.538678] (0)[ip6tables]
<7>[45167.546001] (0)[25301:ip6tables] exit
<7>[45167.546197] (0)[25301:ip6tables] sig 17 to [159:netd]
<7>[45167.546594] (1)[159:netd] fork [25302:netd]
<7>[45167.546626] (1)[25302:netd] set proc[25302] name: ->[iptables]
<7>[45167.549084] (1)[25302:iptables] exit
<7>[45167.549281] (1)[25302:iptables] sig 17 to [159:netd]
<7>[45167.549650] (1)[159:netd] fork [25303:netd]
<7>[45167.549682] (1)[25303:netd] set proc[25303] name: ->[ip6tables]
<7>[45167.552163] (1)[25303:ip6tables] exit
<7>[45167.552361] (1)[25303:ip6tables] sig 17 to [159:netd]
<7>[45167.553933] (1)[159:netd] fork [25304:netd]
<7>[45167.553970] (1)[25304:netd] set proc[25304] name: ->[iptables]
<7>[45167.556747] (1)[25304:iptables] exit
<7>[45167.556941] (1)[25304:iptables] sig 17 to [159:netd]
<7>[45167.557334] (1)[159:netd] fork [25305:netd]
<7>[45167.557368] (1)[25305:netd] set proc[25305] name: ->[ip6tables]
<7>[45167.560195] (1)[25305:ip6tables] exit
<7>[45167.560414] (1)[25305:ip6tables] sig 17 to [159:netd]
<7>[45167.560930] (1)[159:netd] fork [25306:netd]
<7>[45167.560966] (1)[25306:netd] set proc[25306] name: ->[iptables]
<7>[45167.563619] (1)[25306:iptables] exit
<7>[45167.563830] (1)[25306:iptables] sig 17 to [159:netd]
<7>[45167.564283] (1)[159:netd] fork [25307:netd]
<7>[45167.564320] (1)[25307:netd] set proc[25307] name: ->[ip6tables]
<7>[45167.566880] (1)[25307:ip6tables] exit
<7>[45167.567065] (1)[25307:ip6tables] sig 17 to [159:netd]
<7>[45167.567529] (1)[159:netd] fork [25308:netd]
<7>[45167.567574] (1)[25308:netd] set proc[25308] name: ->[iptables]
<7>[45167.571844] (1)[25308:iptables] exit
<7>[45167.572086] (1)[25308:iptables] sig 17 to [159:netd]
<7>[45167.572568] (1)[159:netd] fork [25309:netd]
<7>[45167.572618] (1)[25309:netd] set proc[25309] name: ->[ip6tables]
<7>[45167.575601] (1)[25309:ip6tables] exit
<7>[45167.575832] (1)[25309:ip6tables] sig 17 to [159:netd]
<7>[45167.576310] (1)[159:netd] fork [25310:netd]
<7>[45167.576347] (1)[25310:netd] set proc[25310] name: ->[iptables]
<7>[45167.579483] (1)[25310:iptables] exit
<7>[45167.579702] (1)[25310:iptables] sig 17 to [159:netd]
<7>[45167.581711] (1)[159:netd] fork [25311:netd]
<7>[45167.581749] (1)[25311:netd] set proc[25311] name: ->[ip6tables]
<7>[45167.584318] (1)[25311:ip6tables] exit
<7>[45167.584505] (1)[25311:ip6tables] sig 17 to [159:netd]
<7>[45167.584917] (1)[159:netd] fork [25312:netd]
<7>[45167.584948] (1)[25312:netd] set proc[25312] name: ->[iptables]
<7>[45167.587364] (1)[25312:iptables] exit
<7>[45167.587687] (1)[25312:iptables] sig 17 to [159:netd]
<7>[45167.588051] (1)[159:netd] fork [25313:netd]
<7>[45167.588085] (1)[25313:netd] set proc[25313] name: ->[ip6tables]
<7>[45167.590569] (1)[25313:ip6tables] exit
<7>[45167.590758] (1)[25313:ip6tables] sig 17 to [159:netd]
<3>[45167.807181] (0)[WMT-IC][I]mt6620_patch_dwn:wmt_core: patch dwn:0 frag(43, 788) ok
<3>[45167.807302] (0)[WMT-IC][I]mt6620_sw_init:Not to check the patch validity
<3>[45167.807886] (0)[WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf14b128)
<3>[45167.812459] (0)[WMT-IC][I]mt6620_sw_init:init_coex ok
<6>[45167.812909] (0)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[45167.812923] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[45167.812936] (0)[STP] mtk_wcn_stp_assert:[I] set f/w assert (0)
<3>[45167.812946] (0)[WMT-IC][I]mt6620_sw_init:enable host STP-UART-FULL mode
<3>[45167.829773] (0)[WMT-IC][I]mt6620_sw_init:set fm mode (2) ok
<6>[45167.829820] (0)[STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[45167.829864] (0)[STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[45167.829904] (0)mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[45167.829935] (0)board_sdio_ctrl force off before on
<6>[45167.829964] (0)mtk_wcn_cmb_sdio_off (3)
<5>[45167.830115] (0)[Power/clkmgr] [freq_meter] data = 15494, freq = 196 MHz
<5>[45167.830263] (0)[Power/clkmgr] [freq_meter] data = 15494, freq = 196 MHz
<6>[45167.830328] (0)mtk_wcn_cmb_sdio_on (3)
<5>[45167.830472] (0)[Power/clkmgr] [freq_meter] data = 15494, freq = 196 MHz
<3>[45167.830539] (0)msdc3 -> USR Resume <- msdc_pm() : L<1692> PID<0x55>
<3>[45167.847788] (0)msdc3 -> ================ <- msdc_set_mclk() : L<948> PID<0x5eec>
<3>[45167.847864] (0)msdc3 -> !!! Set<400KHz> Source<197000KHz> -> sclk<397KHz> DDR<0> mode<0> div<124> <- msdc_set_mclk() : L<950> PID<0x5eec>
<3>[45167.847926] (0)msdc3 -> ================ <- msdc_set_mclk() : L<951> PID<0x5eec>
<3>[45167.873346] (0)msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1762> PID<0x5eec>
<3>[45167.897945] (0)msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<4084> PID<0x5eec>
<3>[45167.898033] (0)msdc3 -> ================ <- msdc_set_mclk() : L<948> PID<0x5eec>
<3>[45167.898099] (0)msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<950> PID<0x5eec>
<3>[45167.898161] (0)msdc3 -> ================ <- msdc_set_mclk() : L<951> PID<0x5eec>
<6>[45167.900481] (0)mmc2: new high speed SDIO card at address 0001
<6>[45167.906175] (0)[WMT-DFT][I]hif_sdio_probe:start!
<6>[45167.906221] (0)[WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x20a) num(0x1)
<6>[45167.906261] (0)[WMT-DFT][I]hif_sdio_probe:card->info[0]: MediaTek MT6620 Wireless Combo Chip
<6>[45167.906301] (0)[WMT-DFT][I]hif_sdio_probe:card->info[1]:
<6>[45167.906334] (0)[WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[45167.906618] (0)[WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(524288)
<7>[45167.906723] (0)WQ_WARN: cpu:4, proc:kworker/u:2, [mmc_rescan+0x0/0x324]dur: 73016385 > 15ms
<7>[45167.977627] (0)WQ_WARN: cpu:0, proc:kworker/0:1, [thermal_zone_device_check+0x0/0x18]dur: 310131308 > 15ms
<6>[45167.987540] (0)[WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[45167.987924] (1)[2:kthreadd] fork [25314:kthreadd]
<6>[45167.987987] (0)[WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<5>[45167.988161] (0)[wlan] net_device prDev(0xd0873000) allocated
<4>[45167.989014] (0)[RT_MONITOR]WARNNING [25314:ksdioirqd/mmc2] SET NOT ALLOW RT Prio [1] for proc [25314:ksdioirqd/mmc2]
<5>[45167.995120] (0)[wlan] Open FW image: WIFI_RAM_CODE done
<5>[45168.002306] (0)[wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[45168.002454] (0)[wlan] Virtual Address = e1e61000 for COMMON MGMT MEMORY POOL.
<5>[45168.002512] (0)[wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[45168.002595] (0)[wlan] Virtual Address = e1e63000 for SW_RFB_T.
<5>[45168.002647] (0)[wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[45168.002725] (0)[wlan] Virtual Address = e1e67000 for MSDU_INFO_T.
<6>[45168.002780] (0)[wlan] wlanAdapterStart(): Acquiring LP-OWN
<6>[45168.018230] (0)[wlan] Chip ID: 0x6620
<6>[45168.018278] (0)[wlan] Revision ID: 0x1
<6>[45168.675627] (0)[wlan] wlanAdapterStart(): Waiting for Ready bit..
<6>[45168.907772] (0)[wlan] Ready bit asserted
<5>[45168.930875] (0)[wlan] [wifi] wlan%d netif_carrier_off
<6>[45168.930949] (0)[wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[45168.931113] (0)[wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[45168.931374] (0)[wlan] Domain: map=0, idx=0, code=0x0000
<7>[45168.937221] (0)[2:kthreadd] fork [25315:kthreadd]
<5>[45168.938148] (1)[wlan] tx_thread starts running...
<6>[45168.951226] (0)[WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(20a) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[45168.951243] (0)[WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[45168.951418] (0)[WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 coredump:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[45168.951975] (1)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<3>[45168.952015] (1)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<4>[45168.952669] (1)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<7>[45168.953546] (0)[25298:loadDriverThrea] exit
<6>[45168.963154] (0)[RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[45168.963178] (0)ADDRCONF(NETDEV_UP): wlan0: link is not ready
<5>[45168.978213] (0)init: starting `wpa_supplicant`
<7>[45168.983308] (0)WQ_WARN: cpu:0, proc:kworker/0:1, [wlanSetMulticastListWorkQueue+0x0/0x1f4 [wlan_mt6620]]dur: 19927000 > 15ms
<7>[45168.983707] (0)[1:init] fork [25316:init]
<7>[45168.985037] (1)[25316:init] set proc[25316] name: ->[logwrapper]
<7>[45168.988848] (1)[25316:logwrapper] fork [25317:logwrapper]
<7>[45168.990838] (1)[25317:logwrapper] set proc[25317] name: ->[wpa_supplicant]
<7>[45169.083539] (0)[299:WifiStateMachin] fork [25318:WifiStateMachin]
<7>[45169.083802] (1)[25318:WifiStateMachin] set proc[25318] name: ->[WifiMonitor]
<7>[45169.287463] (0)WQ_WARN: cpu:0, proc:kworker/0:2, [thermal_zone_device_check+0x0/0x18]dur: 309989154 > 15ms
<5>[45169.337817] (0)[wlan] N=0 closed
<5>[45169.337844] (0)[wlan] EVENT-ROAMING ABORT: Current Time = 37873690
<5>[45169.337860] (0)[wlan] [13] TRANSITION: [0] -> [0]
<6>[45169.339184] (0)[wlan] NAF=0,0,0
<6>[45169.339202] (0)[wlan] NAF=0,0,0
<5>[45169.459858] (0)[Power/clkmgr] [freq_meter] data = 15494, freq = 196 MHz
<7>[45169.499207] (0)[158:netd] fork [25319:netd]
<5>[45169.609339] (0)[wlan] [13] TRANSITION: [0] -> [2]
<7>[45169.622203] (0)[25248:ReferenceQueueD] exit
<7>[45169.622565] (0)[25250:FinalizerDaemon] exit
<7>[45169.622852] (0)[25252:FinalizerWatchd] exit
<7>[45169.629563] (0)[104:zygote] fork [25320:zygote]
<7>[45169.630472] (1)[25320:zygote] fork [25321:zygote]
<7>[45169.630556] (0)[25321:zygote] set proc[25321] name: ->[GC]
<7>[45169.632260] (1)[25320:zygote] fork [25322:zygote]
<7>[45169.632327] (0)[25322:zygote] set proc[25322] name: ->[Signal Catcher]
<7>[45169.633051] (0)[104:zygote] fork [25323:zygote]
<7>[45169.633194] (1)[25323:zygote] set proc[25323] name: ->[ReferenceQueueD]
<7>[45169.633590] (1)[25320:zygote] fork [25324:zygote]
<7>[45169.633624] (0)[25324:zygote] set proc[25324] name: ->[Compiler]
<7>[45169.634110] (0)[104:zygote] fork [25325:zygote]
<7>[45169.634174] (1)[25325:zygote] set proc[25325] name: ->[FinalizerDaemon]
<7>[45169.634521] (0)[104:zygote] fork [25326:zygote]
<7>[45169.634586] (1)[25326:zygote] set proc[25326] name: ->[FinalizerWatchd]
<7>[45169.635605] (1)[25320:zygote] fork [25327:zygote]
<7>[45169.635709] (0)[25327:zygote] set proc[25327] name: ->[ReferenceQueueD]
<7>[45169.636836] (1)[25320:zygote] fork [25328:zygote]
<7>[45169.636881] (1)[25328:zygote] set proc[25328] name: ->[FinalizerDaemon]
<7>[45169.637932] (1)[25320:zygote] fork [25329:zygote]
<7>[45169.638147] (1)[25329:zygote] set proc[25329] name: ->[FinalizerWatchd]
<7>[45169.640668] (0)[3978:logcat] sig 13 to [3978:logcat]
<7>[45169.641019] (1)[13265:logcat] sig 13 to [13265:logcat]
<7>[45169.641432] (0)[1045:logcat] sig 13 to [1045:logcat]
<7>[45169.644578] (1)[25320:zygote] set proc[25320] name: ->[d.apps.uploader]
<7>[45169.660498] (0)[25320:d.apps.uploader] fork [25330:d.apps.uploader]
<7>[45169.660824] (1)[25330:d.apps.uploader] set proc[25330] name: ->[Binder Thread #]
<7>[45169.661343] (1)[25330:Binder Thread #] fork [25331:Binder Thread #]
<7>[45169.661406] (1)[25331:Binder Thread #] set proc[25331] name: ->[Binder Thread #]
<7>[45169.664995] (0)[25320:d.apps.uploader] set proc[25320] name: ->[re-initialized>]
<7>[45169.713561] (1)[25320:re-initialized>] set proc[25320] name: ->[d.apps.uploader]
<3>[45169.747524] (0)[WMT-DEV][I]wmt_dev_tra_sdio_poll:**poll_during_time = 35210 > 3000, sdio_during_count = 2410 > 200, query
<3>[45169.747542] (0)[WMT-DEV][I]wmt_dev_tm_temp_query:sdio traffic , we must query temperature..
<4>[45169.747567] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<4>[45169.747611] (1)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<4>[45169.747922] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<4>[45169.747949] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<4>[45169.748961] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<4>[45169.748984] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<4>[45169.749376] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<4>[45169.749396] (0)[STP-PSM] [I]_stp_psm_put_op: opId(0) enqueue
<3>[45169.749412] (0)[WMT-DEV][I]wmt_dev_tm_temp_query:[Thermal] current_temp = 0x24
<4>[45169.749517] (1)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<3>[45169.749584] (0)[WMT-CORE][I]opfunc_pwr_sv:**** Send sleep command
<3>[45169.749899] (0)[WMT-CORE][I]opfunc_pwr_sv:Send sleep command OK!
<3>[45169.749921] (0)[WMT-CORE][I]opfunc_pwr_sv:Do STP-CB! 0 bf1354c8
<6>[45169.751304] (1)src = COMBO_IF_UART, to enter deep idle? 1
<7>[45169.830113] (1)[25320:d.apps.uploader] fork [25332:d.apps.uploader]
<7>[45169.837583] (1)[25332:d.apps.uploader] set proc[25332] name: ->[RefQueueWorker@]
<5>[45169.863634] (0)[Power/Alarm] alarm 0 set 1366445949.515000000
<7>[45169.867204] (1)[25320:d.apps.uploader] fork [25333:d.apps.uploader]
<7>[45169.867260] (0)[25333:d.apps.uploader] set proc[25333] name: ->[Thread-2436]
<7>[45169.895431] (0)[25292:AsyncTask #3] fork [25334:AsyncTask #3]
<7>[45169.907029] (1)[25320:d.apps.uploader] fork [25335:d.apps.uploader]
<7>[45169.907099] (0)[25335:d.apps.uploader] set proc[25335] name: ->[SharedPreferenc]
<7>[45169.913431] (0)[25335:SharedPreferenc] exit
<7>[45169.918649] (0)[25334:AsyncTask #3] set proc[25334] name: ->[dmesg]

# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IMM76D
ro.build.display.id=ALPS.ICS2.MP.V1.5
ro.build.version.incremental=eng.root.1348744929
ro.custom.build.version=1348744929
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=2012年 09月 27日 星期四 19:23:47 CST
ro.build.date.utc=1348745027
ro.build.type=user
ro.build.user=root
ro.build.host=agold-bahe8-desktop
ro.build.tags=test-keys
ro.product.model=e1911_v77_jbaol_g20mt9p017
ro.product.brand=alps
ro.product.name=e1911_v77_jbaol_g20mt9p017
ro.product.device=e1911_v77_jbaol_g20mt9p017
ro.product.board=e1911_v77_jbaol_g20mt9p017
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=alps
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=e1911_v77_jbaol_g20mt9p017
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=e1911_v77_jbaol_g20mt9p017-user 4.0.4 IMM76D eng.root.1348744929 test-keys
ro.build.fingerprint=alps/e1911_v77_jbaol_g20mt9p017/e1911_v77_jbaol_g20mt9p017:4.0.4/IMM76D/1348744929:user/test-keys
ro.build.flavor=
persist.sys.timezone=
ro.build.characteristics=default
ro.build.shutdown.animation=no
ro.build.tv.location=-1
ro.build.time.format=12
ro.build.date.format=yyyy-MMM-d-EE
ro.build.ipo.setting=yes
ro.build.bluetooth.name=
ro.build.wifi.ssid=
ro.build.default.scrbrightness=160
ro.build.mtkversion.switch=no
ro.build.keyboard.touchaudio=yes
ro.build.touch.sound=no
ro.lockscreen.sound=yes
ro.touch.vibrator.feed=yes
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=ALPS.ICS2.MP.V1.5
ro.mediatek.platform=MT6577
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.ICS2.MP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=128m
# Encrypt phone function
ro.crypto.tmpfs_options=mode=0771,uid=1000,gid=1000
ro.crypto.fs_type=ext4
ro.crypto.fs_real_blkdev=/emmc@usrdata
ro.crypto.fs_mnt_point=/data
ro.crypto.fs_options=noauto_da_alloc
ro.crypto.fs_flags=0x00000406
# USB MTP WHQL
ro.sys.usb.mtp.whql.enable=0
# Power off opt in IPO
sys.ipo.pwrdncap=2
ro.sys.usb.storage.type=mtp,mass_storage
#
# ADDITIONAL_BUILD_PROPERTIES
#
fmradio.driver.chip=1
ro.sf.hwrotation=0
ril.current.share_modem=2
launcherplus.allappsgrid=2d
launcher2.allappsgrid=3d_20
curlockscreen=2
ro.mediatek.gemini_support=true
persist.radio.fd.counter=20
persist.radio.fd.off.counter=20
drm.service.enabled=true
fmradio.driver.enable=1
mediatek.wlan.chip=MT6620
mediatek.wlan.module.postfix=
dalvik.vm.mtk-stack-trace-file=/data/anr/mtk_traces.txt
ro.config.notification_sound=Whistle.ogg
ro.config.alarm_alert=Walk_in_the_forest.ogg
ro.config.ringtone=S_Over_the_horizon.ogg
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt

wlan_mt6620 286280 0 - Live 0xbf205000 (P)
cfg80211 122084 0 - Live 0xbf1dc000
mtk_fm_priv 8917 0 - Live 0xbf1d6000 (P)
mt6620_fm_drv 111949 1 mtk_fm_priv, Live 0xbf1ae000
mtk_stp_bt 39986 0 - Live 0xbf1a1000
mtk_stp_gps 37294 0 - Live 0xbf194000
mtk_stp_uart 21593 1 - Live 0xbf18b000 (P)
mtk_stp_wmt 375852 8 wlan_mt6620,mtk_fm_priv,mt6620_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf121000 (P)
mtk_hif_sdio 18769 2 wlan_mt6620,mtk_stp_wmt, Live 0xbf118000
devinfo 840 0 - Live 0xbf114000 (P)
devapc 4553 0 - Live 0xbf10f000 (P)
sec 90381 0 - Live 0xbf0f2000 (P)
vcodec_kernel_driver 42938 2 - Live 0xbf0e2000 (P)
m4u 113419 22 - Live 0xbf0bd000 (P)
ccmni 17150 0 - Live 0xbf0b4000 (P)
ccci 117400 15 ccmni, Live 0xbf08c000 (P)
ccci_plat 127170 2 ccmni,ccci, Live 0xbf063000 (P)
mtk_drvb_77 6081 0 - Live 0xbf05e000 (P)
mtklfb 23578 0 - Live 0xbf054000
pvrsrvkm 233143 99 mtklfb, Live 0xbf00d000
mtk_hwe 1386 0 - Live 0xbf009000 (P)
aed 16384 3 - Live 0xbf000000 (P)

RAM: 512 MB (482 MB available)

System RAM: 482.000MB
mtkfb.0: 8.000MB


Flash: 4 GB (3.616 GB actual); 16 GB (14.410 GB actual)

mmcblk0: 3.616 GB
mmcblk1: 14.410 GB


触摸屏为 alps e1911_v77_jbaol_g20mt9p017

$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft

$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k

$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K

$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch

$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm

$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle

$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L

$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch

$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin

$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers

新电池 alps e1911_v77_jbaol_g20mt9p017

$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft

$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K

$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k

$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch

$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm

$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle

$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L

$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers

$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch

$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin

占地面积 alps e1911_v77_jbaol_g20mt9p017

$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft

$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch

$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k

$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K

$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm

$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle

$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L

$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers

$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin

$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch

Find Similar devices
Same CPU:
Same Display resolution:
Same ro.build.description:

NEW: 查看完整数据库 >>

的最新:

A19 Pro
alps i14PROMAX
Xiaomi 2201117SI
NUMVIBE X30Pro
Pad_Ultra
INFINIX Infinix X6835B
Xiaomi Redmi 5 Plus
Cat S62 Pro
alps S24 Ultra
alps Reno9 Pro+ 5G
Kobo arc 10HD
L16 Max lingbo l16 max
Lingbo tab s9 ultra
HUAWEI EC6108V9-01
samsung 14 Pro Max
L16 Max
HUAWEI VNS-L31
alps I14 Pro Max
unknown HiDPTAndroid_Hi3751V510
S9 Ultra
Amazon KFRAWI
OnePlus GM1910
android P30
welcome S23 Ultra
AXDIA INTERNATIONAL GMBH PACE10
vivo V1916A
Google Pixel 7
Galaxy S24 Ultra 5G SM-S928B/DS
QUALCOMM trinket for arm64
alps F9210B
Pad 6 Pro
HUAWEI JAT-LX1
alps Galaxy S22 Ultra
HUAWEI KSA-LX9
alps Rino9_pro+
XXB_GMS
realme RMX3363
Google MBOX
alps L015B
alps i13 pro max
alps i14_Pro_Max
SAMSUNG SM-S928BIU
HUAWEI MGA-LX3
alps ZL10
HUAWEI JAT-LX1
Fplus T1100
samsung SM-A215U
alps I15 Pro Max
alps A73s
alps S24 Ultra