| 一般规格 | |
|---|---|
| 生产厂家 | sprd |
| 型号 | SPHS on Hsdroid |
| Android版 | Android4.0.3; T206_ZLHV08.04_W12.20_P9_20120822.1539; SDK10 |
| 中央处理单元 | 1 core; ARMv7 Processor rev 1 (v7l) sprdbp; Max: 1000,0 MHz; Min: 400,0 MHz |
| 显示 | 480 x 320; DPI: 160; Evaluated Size: 3,6" |
| 触摸屏 | Multitouch 5 points |
| 图形处理器 | Mali-300; ARM; OpenGL ES-CM 1.1; OpenGL ES 2.0 |
| 内存RAM | 230 MB |
| 快闪记忆体 | 8 GB (7.402 GB actual); 0.5 GB (0.456 GB actual) (见存储器映射选项卡) |
| 沟通 | |
| 电话 | GSM |
| WiFi | bcmdhd; IEEE 802.11 b/g/n; Broadcom 4329/30; AP Mode |
| USB主机 | No |
| 蓝牙 | Bluetooth® 2.1 + EDR |
| 全球定位系统 | No |
| 高级功能 | |
| 前置摄像头 | Photo: 5.0 MP; Max: 2592x1944; Focus: auto auto-multi macro; Flash modes: off on torch |
| 背照相机 | Photo: 3.1 MP; Max size: 2048x1536; Focus: auto; No flash |
| 传感器 | BMA250 3-axis Accelerometer (Bosch Sensortec); range: 0...39,22; resolution: 0,038 (0,098%); power: 0,03mA; |
| AK8975 3-axis Magnetic field sensor (Asahi Kasei Microdevices); range: 0...1228,8; resolution: 0,06 (0,005%); power: 0,35mA; | |
| AL3006 Light sensor (LITEON); range: 0...1; resolution: 100000 (10000000%); power: 0,005mA; | |
| AL3006 Proximity sensor (LITEON); range: 0...1; resolution: 1 (100%); power: 0,005mA; | |
| Gravity Sensor (Google Inc.); range: 0...39,22; resolution: 0,038 (0,098%); power: 0,03mA; | |
| Linear Acceleration Sensor (Google Inc.); range: 0...39,22; resolution: 0,038 (0,098%); power: 0,03mA; | |
| Rotation Vector Sensor (Google Inc.); range: 0...1; resolution: 0 (0%); power: 0,38mA; | |
| 震动模式 | Yes |
| 支持的语言 | 30; Arabic; Bengali; Czech; Danish; German; Greek; English; Spanish; Finnish; French; Hebrew; Croatian; Hungarian; Indonesian; Italian; Korean; Malay; Norwegian; Dutch; Polish; Portuguese; Romanian; Russian; Slovak; Serbian; Swedish; Thai; Turkish; Ukrainian; Chinese |
| 电池 | Technology: Li-ion; Voltage: 3550 |
| FM radio | 76MHz to 108MHz |
| SD Version: | 1.1 5 |
KERNEL: Linux version 2.6.35.7 (shaohuihua@ubuntu) (gcc version 4.4.3 (GCC) ) #23 Wed Aug 22 15:51:57 CST 2012
CODENAME: REL
Mainboard: sp8810ga_zlh_l328
BRAND: sprd
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: hsdroid
DISPLAY: MocorDroid4.0.3.T206_ZLHV08.04_W12.20_P9_20120822.1539
FINGERPRINT: unknown
HARDWARE: sp8810
ID: MocorDroid4.0.3
TAGS: test-keys
Processor : ARMv7 Processor rev 1 (v7l)
BogoMIPS : 1024.00
Features : swp half thumb fastmult vfp edsp neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xc05
CPU revision : 1
Hardware : SP8810
Revision : 0000
Serial : 0000000000000000
GL_OES_texture_npot
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_standard_derivatives
GL_OES_EGL_image
GL_OES_depth24
GL_ARM_rgba8
GL_ARM_mali_shader_binary
GL_OES_depth_texture
GL_OES_packed_depth_stencil
GL_EXT_texture_format_BGRA8888
GL_EXT_blend_minmax
GL_OES_EGL_image_external
GL_OES_EGL_sync
GL_EXT_multisampled_render_to_texture
GL_EXT_discard_framebuffer
<4>[ 131.440000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,09486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 131.479000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 131.480000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,09486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,09486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 131.534000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 131.539000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,09486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,09486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 131.588000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 131.601000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,09486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,09486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 131.643000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 131.658000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,09486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,09486 d3d3d3 0xD3 :0,0,148,134,134eic_handler
<4>[ 131.698000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 131.698000] 111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,09486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,09486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 131.752000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 131.757000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,09486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,09486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 131.807000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 131.816000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,09486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,09486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 131.862000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 131.875000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,09486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,09486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 131.917000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 131.935000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,09486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 131.971000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 131.974000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,09486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,09486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 132.026000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 132.034000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,09486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,09486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 132.081000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 132.093000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,09486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,09486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 132.135000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 132.150000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,09486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 132.190000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 132.190000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,09486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,09486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 132.245000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 132.249000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,09486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,09486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 132.299000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 132.308000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,09486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,09486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 132.354000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 132.367000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 132.400000] +++enter wlan_oob_irq
<4>[ 132.400000] eic_handler
<4>[ 132.400000] eic_handler
<4>[ 132.400000] +++enter wlan_oob_irq
<4>[ 132.400000] eic_handler
<4>[ 132.401000] eic_handler
<4>[ 132.401000] +++enter wlan_oob_irq
<4>[ 132.401000] eic_handler
<4>[ 132.402000] eic_handler
<4>[ 132.402000] +++enter wlan_oob_irq
<4>[ 132.402000] eic_handler
<4>[ 132.402000] eic_handler
<4>[ 132.402000] +++enter wlan_oob_irq
<4>[ 132.402000] eic_handler
<4>[ 132.402000] eic_handler
<4>[ 132.402000] +++enter wlan_oob_irq
<4>[ 132.402000] eic_handler
<4>[ 132.409000] eic_handler
<4>[ 132.409000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dda0
<4>[ 132.427000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 132.463000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<3>[ 132.509000] init: sys_prop: permission denied uid:1000 gid:1000 name:persist.msms.phone_default
<3>[ 132.509000] init: sys_prop: permission denied uid:1000 gid:1000 name:persist.msms.phone_default
<3>[ 132.509000] init: sys_prop: permission denied uid:1000 gid:1000 name:persist.msms.phone_default
<4>[ 132.518000] eic_handler
<4>[ 132.518000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 132.531000] eic_handler
<4>[ 132.531000] +++enter wlan_oob_irq
<4>[ 132.531000] eic_handler
<4>[ 132.532000] eic_handler
<4>[ 132.532000] +++enter wlan_oob_irq
<4>[ 132.532000] eic_handler
<4>[ 132.543000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,09486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 132.573000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 132.627000] eic_handler
<4>[ 132.627000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 132.668000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0
<3>[ 132.674000] init: sys_prop: permission denied uid:1001 gid:1001 name:persist.msms.phone_default
<3>[ 132.676000] init: sys_prop: permission denied uid:1001 gid:1001 name:persist.msms.phone_default
<4>[ 132.682000] eic_handler
<4>[ 132.682000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 132.737000] eic_handler
<4>[ 132.737000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 132.768000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 132.792000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 132.846000] eic_handler
<4>[ 132.846000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 132.869000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 132.901000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 132.956000] eic_handler
<4>[ 132.956000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 132.969000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,09486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 133.010000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 133.065000] eic_handler
<4>[ 133.065000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 133.071000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 133.120000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 133.172000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 133.174000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 133.229000] eic_handler
<4>[ 133.229000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 133.272000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 133.284000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 133.338000] eic_handler
<4>[ 133.338000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 133.375000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 133.393000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 133.448000] eic_handler
<4>[ 133.448000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 133.476000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 133.502000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 133.557000] eic_handler
<4>[ 133.557000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 133.578000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 133.612000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 133.666000] eic_handler
<4>[ 133.667000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 133.678000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 133.721000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 133.770000] shaohua test sprd_free_gpio_irq err=0
<4>[ 133.770000] shaohua power off------------------------
<4>[ 133.776000] eic_handler
<4>[ 133.776000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 133.788000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,09486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 133.831000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 133.885000] eic_handler
<4>[ 133.885000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 133.893000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0request success
<4>[ 133.923000] WLAN_REG_ON--->0
<4>[ 133.940000] eic_handler
<4>[ 133.940000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 133.995000] eic_handler
<4>[ 133.995000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 134.049000] eic_handler
<4>[ 134.049000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 134.104000] eic_handler
<4>[ 134.104000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 134.132000] bcm_detect_card: (cd96a000), call
<4>[ 134.132000] mmc1: !!!!! error in sending cmd:52, int:0x10000, err:-110
<4>[ 134.154000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 134.159000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 134.174000] bcmsdh_sdmmc: probe of mmc1:0001:1 failed with error -110
<4>[ 134.174000] mmc1: !!!!! error in sending cmd:52, int:0x10000, err:-110
<4>[ 134.184000] bcmsdh_sdmmc: probe of mmc1:0001:2 failed with error -110
<4>[ 134.184000]
<4>[ 134.184000] Dongle Host Driver, version 5.90.195.26.1
<4>[ 134.185000] mmc_sdio_detect:458 About to select card c8c6ac00
<4>[ 134.185000] mmc1: !!!!! error in sending cmd:7, int:0x10000, err:-110
<4>[ 134.195000] mmc1: !!!!! error in sending cmd:7, int:0x10000, err:-110
<4>[ 134.205000] mmc1: !!!!! error in sending cmd:7, int:0x10000, err:-110
<4>[ 134.214000] eic_handler
<4>[ 134.214000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 134.215000] mmc1: !!!!! error in sending cmd:7, int:0x10000, err:-110
<6>[ 134.224000] mmc1: card 0001 removed
<4>[ 134.224000] mmc1: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
<4>[ 134.225000] sdhci_sprd_set_ahb_clock, mmc:1, set ahb clk:0
<4>[ 134.225000] SDIO1: sdhci_sprd_set_ahb_clock, set ahb clk:0
<4>[ 134.225000] mmc1: clock 0Hz busmode 1 powermode 1 cs 0 Vdd 17 width 0 timing 0
<4>[ 134.225000] sdhci_sprd_set_ahb_clock, mmc:1, set ahb clk:0
<4>[ 134.225000] SDIO1: sdhci_sprd_set_ahb_clock, set ahb clk:0
<4>[ 134.225000] mmc1: clock 375000Hz busmode 1 powermode 2 cs 0 Vdd 17 width 0 timing 0
<4>[ 134.225000] sdhci_sprd_set_ahb_clock, mmc:1, set ahb clk:375000
<4>[ 134.226000] mmc1, clock_control:0x8007
<4>[ 134.263000] mmc1: clock 375000Hz busmode 1 powermode 2 cs 1 Vdd 17 width 0 timing 0
<4>[ 134.263000] sdhci_sprd_set_ahb_clock, mmc:1, set ahb clk:375000
<4>[ 134.266000] mmc1: clock 375000Hz busmode 1 powermode 2 cs 0 Vdd 17 width 0 timing 0
<4>[ 134.266000] sdhci_sprd_set_ahb_clock, mmc:1, set ahb clk:375000
<4>[ 134.267000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 134.269000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 134.279000] mmc1: clock 375000Hz busmode 1 powermode 2 cs 0 Vdd 17 width 0 timing 0
<4>[ 134.279000] sdhci_sprd_set_ahb_clock, mmc:1, set ahb clk:375000
<4>[ 134.280000] mmc1: clock 375000Hz busmode 1 powermode 2 cs 1 Vdd 17 width 0 timing 0
<4>[ 134.281000] sdhci_sprd_set_ahb_clock, mmc:1, set ahb clk:375000
<4>[ 134.284000] mmc1: clock 375000Hz busmode 1 powermode 2 cs 0 Vdd 17 width 0 timing 0
<4>[ 134.284000] sdhci_sprd_set_ahb_clock, mmc:1, set ahb clk:375000
<4>[ 134.286000] mmc_sdio_init_card: old_card (null)
<4>[ 134.287000] mmc_sdio_init_card: save_rca 1
<4>[ 134.287000] mmc1: clock 375000Hz busmode 2 powermode 2 cs 0 Vdd 17 width 0 timing 0
<4>[ 134.287000] sdhci_sprd_set_ahb_clock, mmc:1, set ahb clk:375000
<4>[ 134.288000] mmc_sdio_init_card:329 About to select card c8c6a600
<4>[ 134.297000] mmc1: clock 375000Hz busmode 2 powermode 2 cs 0 Vdd 17 width 0 timing 2
<4>[ 134.297000] sdhci_sprd_set_ahb_clock, mmc:1, set ahb clk:375000
<4>[ 134.298000] mmc1: clock 50000000Hz busmode 2 powermode 2 cs 0 Vdd 17 width 0 timing 2
<4>[ 134.298000] sdhci_sprd_set_ahb_clock, mmc:1, set ahb clk:50000000
<4>[ 134.299000] mmc1, clock_control:0x107
<4>[ 134.299000] mmc1: clock 50000000Hz busmode 2 powermode 2 cs 0 Vdd 17 width 2 timing 2
<4>[ 134.299000] sdhci_sprd_set_ahb_clock, mmc:1, set ahb clk:50000000
<6>[ 134.302000] mmc1: new high speed SDIO card at address 0001
<4>[ 134.305000] dhd_customer_oob_irq_map: customer specific Host GPIO number is (142)
<4>[ 134.305000]
<4>[ 134.305000] <<
<4>[ 134.308000] MAC (FILE): [00:27:15:08:2C:38] [1]
<4>[ 134.308000] WIFI: MAC Addr = 00:27:15:08:2C:38
<4>[ 134.324000] eic_handler
<4>[ 134.324000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 134.357000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 134.378000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 134.433000] eic_handler
<4>[ 134.433000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 134.456000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0<<
<4>[ 134.466000] +++enter wlan_oob_irq
<4>[ 134.466000] eic_handler
<4>[ 134.466000] <<
<4>[ 134.466000] eic_handler
<4>[ 134.466000] eic_handler
<4>[ 134.467000] +++enter wlan_oob_irq
<4>[ 134.467000] eic_handler
<4>[ 134.467000] dhd_wlfc_init(): successfully enabled bdcv2 tlv signaling, 15
<4>[ 134.467000] MAC (FILE): [00:27:15:08:2C:38] [1]
<4>[ 134.467000] WIFI: MAC Addr = 00:27:15:08:2C:38
<4>[ 134.467000] eic_handler
<4>[ 134.467000] +++enter wlan_oob_irq
<4>[ 134.467000] eic_handler
<4>[ 134.468000] Firmware up: op_mode=1, Broadcom Dongle Host Driver mac=00:27:15:08:2c:38
<4>[ 134.468000] eic_handler
<4>[ 134.468000] +++enter wlan_oob_irq
<4>[ 134.468000] eic_handler
<4>[ 134.468000] eic_handler
<4>[ 134.468000] +++enter wlan_oob_irq
<4>[ 134.468000] eic_handler
<4>[ 134.469000] eic_handler
<4>[ 134.469000] +++enter wlan_oob_irq
<4>[ 134.469000] eic_handler
<4>[ 134.469000] eic_handler
<4>[ 134.469000] +++enter wlan_oob_irq
<4>[ 134.469000] eic_handler
<4>[ 134.469000] eic_handler
<4>[ 134.469000] +++enter wlan_oob_irq
<4>[ 134.470000] eic_handler
<4>[ 134.470000] eic_handler
<4>[ 134.470000] +++enter wlan_oob_irq
<4>[ 134.470000] eic_handler
<4>[ 134.470000] eic_handler
<4>[ 134.471000] +++enter wlan_oob_irq
<4>[ 134.471000] eic_handler
<4>[ 134.471000] eic_handler
<4>[ 134.471000] +++enter wlan_oob_irq
<4>[ 134.471000] eic_handler
<4>[ 134.471000] eic_handler
<4>[ 134.471000] +++enter wlan_oob_irq
<4>[ 134.471000] eic_handler
<4>[ 134.472000] eic_handler
<4>[ 134.472000] +++enter wlan_oob_irq
<4>[ 134.472000] eic_handler
<4>[ 134.472000] eic_handler
<4>[ 134.472000] +++enter wlan_oob_irq
<4>[ 134.472000] eic_handler
<4>[ 134.473000] eic_handler
<4>[ 134.473000] +++enter wlan_oob_irq
<4>[ 134.473000] eic_handler
<4>[ 134.473000] eic_handler
<4>[ 134.473000] +++enter wlan_oob_irq
<4>[ 134.473000] eic_handler
<4>[ 134.474000] eic_handler
<4>[ 134.474000] +++enter wlan_oob_irq
<4>[ 134.474000] eic_handler
<4>[ 134.488000] eic_handler
<4>[ 134.488000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 134.542000] eic_handler
<4>[ 134.543000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 134.556000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 134.563000] +++enter wlan_oob_irq
<4>[ 134.563000] eic_handler
<4>[ 134.563000] eic_handler
<4>[ 134.563000] +++enter wlan_oob_irq
<4>[ 134.563000] eic_handler
<4>[ 134.564000] Firmware version = wl0: Feb 28 2012 20:47:23 version 5.90.125.95.7
<4>[ 134.564000] Broadcom Dongle Host Driver: register interface [eth0] MAC: 00:90:4c:11:22:33
<4>[ 134.565000] eic_handler
<4>[ 134.565000] +++enter wlan_oob_irq
<4>[ 134.565000] eic_handler
<4>[ 134.567000] eic_handler
<4>[ 134.567000] +++enter wlan_oob_irq
<4>[ 134.567000] eic_handler
<4>[ 134.568000] eic_handler
<4>[ 134.568000] +++enter wlan_oob_irq
<4>[ 134.568000] eic_handler
<4>[ 134.568000] eic_handler
<4>[ 134.568000] +++enter wlan_oob_irq
<4>[ 134.568000] eic_handler
<4>[ 134.569000] eic_handler
<4>[ 134.569000] +++enter wlan_oob_irq
<4>[ 134.569000] eic_handler
<4>[ 134.569000] eic_handler
<4>[ 134.569000] +++enter wlan_oob_irq
<4>[ 134.569000] eic_handler
<4>[ 134.569000] eic_handler
<4>[ 134.569000] +++enter wlan_oob_irq
<4>[ 134.569000] eic_handler
<4>[ 134.570000] eic_handler
<4>[ 134.570000] +++enter wlan_oob_irq
<4>[ 134.570000] eic_handler
<4>[ 134.571000] eic_handler
<4>[ 134.571000] +++enter wlan_oob_irq
<4>[ 134.571000] eic_handler
<4>[ 134.572000] eic_handler
<4>[ 134.572000] +++enter wlan_oob_irq
<4>[ 134.572000] eic_handler
<4>[ 134.597000] eic_handler
<4>[ 134.597000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 134.652000] eic_handler
<4>[ 134.652000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 134.658000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 134.707000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 134.759000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 134.761000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 134.816000] eic_handler
<4>[ 134.816000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 134.860000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 134.871000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xc6a5dde0
<4>[ 134.925000] eic_handler
<4>[ 134.925000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 134.960000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 134.980000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 135.035000] eic_handler
<4>[ 135.035000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 135.061000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 135.089000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 135.136000] eic_handler
<4>[ 135.136000] +++enter wlan_oob_irq
<4>[ 135.136000] eic_handler
<4>[ 135.137000] eic_handler
<4>[ 135.137000] +++enter wlan_oob_irq
<4>[ 135.137000] eic_handler
<4>[ 135.137000] eic_handler
<4>[ 135.137000] +++enter wlan_oob_irq
<4>[ 135.137000] eic_handler
<4>[ 135.137000] eic_handler
<4>[ 135.137000] +++enter wlan_oob_irq
<4>[ 135.137000] eic_handler
<4>[ 135.137000] eic_handler
<4>[ 135.137000] +++enter wlan_oob_irq
<4>[ 135.137000] eic_handler
<4>[ 135.137000] eic_handler
<4>[ 135.137000] +++enter wlan_oob_irq
<4>[ 135.137000] eic_handler
<4>[ 135.137000] eic_handler
<4>[ 135.137000] +++enter wlan_oob_irq
<4>[ 135.137000] eic_handler
<4>[ 135.137000] eic_handler
<4>[ 135.137000] +++enter wlan_oob_irq
<4>[ 135.137000] eic_handler
<4>[ 135.138000] eic_handler
<4>[ 135.138000] +++enter wlan_oob_irq
<4>[ 135.138000] eic_handler
<4>[ 135.138000] eic_handler
<4>[ 135.138000] +++enter wlan_oob_irq
<4>[ 135.138000] eic_handler
<4>[ 135.138000] eic_handler
<4>[ 135.138000] +++enter wlan_oob_irq
<4>[ 135.138000] eic_handler
<4>[ 135.138000] eic_handler
<4>[ 135.138000] +++enter wlan_oob_irq
<4>[ 135.138000] eic_handler
<4>[ 135.138000] eic_handler
<4>[ 135.138000] +++enter wlan_oob_irq
<4>[ 135.138000] eic_handler
<4>[ 135.138000] eic_handler
<4>[ 135.138000] +++enter wlan_oob_irq
<4>[ 135.138000] eic_handler
<4>[ 135.138000] eic_handler
<4>[ 135.139000] eic_handler
<4>[ 135.139000] +++enter wlan_oob_irq
<4>[ 135.139000] eic_handler
<4>[ 135.144000] eic_handler
<4>[ 135.144000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 135.151000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,09486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 135.199000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 135.253000] eic_handler
<4>[ 135.253000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 135.261000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 135.308000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 135.362000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 135.363000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 135.417000] eic_handler
<4>[ 135.418000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 135.464000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 135.472000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 135.527000] eic_handler
<4>[ 135.527000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 135.565000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 135.582000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0xe6a5dde0
<4>[ 135.618000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0eic_handler
<4>[ 135.631000] +++enter wlan_oob_irq
<4>[ 135.631000] eic_handler
<4>[ 135.632000] eic_handler
<4>[ 135.632000] +++enter wlan_oob_irq
<4>[ 135.632000] eic_handler
<4>[ 135.632000] eic_handler
<4>[ 135.632000] +++enter wlan_oob_irq
<4>[ 135.632000] eic_handler
<4>[ 135.632000] eic_handler
<4>[ 135.633000] +++enter wlan_oob_irq
<4>[ 135.633000] eic_handler
<4>[ 135.634000] eic_handler
<4>[ 135.634000] +++enter wlan_oob_irq
<4>[ 135.634000] eic_handler
<4>[ 135.636000] eic_handler
<4>[ 135.636000] +++enter wlan_oob_irq
<4>[ 135.636000] eic_handler
<4>[ 135.636000] eic_handler
<4>[ 135.636000] linux nk_sprd_unmask_ana_irq 37, int_enable = 0x66a5dde0
<4>[ 135.637000] eic_handler
<4>[ 135.637000] +++enter wlan_oob_irq
<4>[ 135.637000] eic_handler
<4>[ 135.637000] eic_handler
<4>[ 135.637000] +++enter wlan_oob_irq
<4>[ 135.637000] eic_handler
<4>[ 135.637000] eic_handler
<4>[ 135.637000] +++enter wlan_oob_irq
<4>[ 135.637000] eic_handler
<4>[ 135.638000] eic_handler
<4>[ 135.638000] +++enter wlan_oob_irq
<4>[ 135.638000] eic_handler
<4>[ 135.638000] eic_handler
<4>[ 135.638000] +++enter wlan_oob_irq
<4>[ 135.638000] eic_handler
<4>[ 135.638000] eic_handler
<4>[ 135.638000] +++enter wlan_oob_irq
<4>[ 135.638000] eic_handler
<4>[ 135.639000] eic_handler
<4>[ 135.639000] +++enter wlan_oob_irq
<4>[ 135.639000] eic_handler
<4>[ 135.639000] eic_handler
<4>[ 135.639000] +++enter wlan_oob_irq
<4>[ 135.639000] eic_handler
<4>[ 135.650000] eic_handler
<4>[ 135.650000] +++enter wlan_oob_irq
<4>[ 135.650000] eic_handler
<4>[ 135.651000] eic_handler
<4>[ 135.651000] +++enter wlan_oob_irq
<4>[ 135.651000] eic_handler
<4>[ 135.652000] eic_handler
<4>[ 135.652000] +++enter wlan_oob_irq
<4>[ 135.652000] eic_handler
<4>[ 135.652000] eic_handler
<4>[ 135.652000] +++enter wlan_oob_irq
<4>[ 135.652000] eic_handler
<4>[ 135.653000] eic_handler
<4>[ 135.653000] +++enter wlan_oob_irq
<4>[ 135.653000] eic_handler
<4>[ 135.666000] 9486 d3d3d3 0xD3 :0,0,148,134,134111111111 0xDA :0,84,022222222 0xDB :0,128,0333333333 0xDC :0,102,0
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=MocorDroid4.0.3
ro.build.display.id=MocorDroid4.0.3.T206_ZLHV08.04_W12.20_P9_20120822.1539
ro.build.version.incremental=T206_ZLHV08.04_W12.20_P9_20120822.1539
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=Android4.0.3
ro.build.date=2012年 08月 22日 星期三 15:47:23 CST
ro.build.date.utc=1345621643
ro.build.type=user
ro.build.user=shaohuihua
ro.build.host=ubuntu
ro.build.tags=test-keys
ro.product.model=SPHS on Hsdroid
ro.product.brand=sprd
ro.product.name=sprdroid_base
ro.product.device=hsdroid
ro.product.board=sp8810ga_zlh_l328
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=sprd
ro.wifi.channels=
ro.board.platform=sprdbp
# ro.build.product is obsolete; use ro.product.device
ro.build.product=hsdroid
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=user Android4.0.3 MocorDroid4.0.3 T206_ZLHV08.04_W12.20_P9_20120822.1539 test-keys
ro.build.fingerprint=sprd/sprdroid_base/hsdroid:Android4.0.3/MocorDroid4.0.3/T206_ZLHV08.04_W12.20_P9_20120822.1539:user/test-keys
persist.sys.timezone=Asia/Shanghai
ro.product.carrier=
ro.product.locale.language=zh
ro.product.locale.region=CN
ro.msms.phone_count=2sim
# end build properties
#
# system.prop for hsdroid
#
#rild.libpath=/system/lib/libsp_ril.so
#wifi.interface = tiwlan0
# Time between scans in seconds. Keep it high to minimize battery drain.
# This only affects the case in which there are remembered access points,
# but none are in range.
wifi.supplicant_scan_interval = 48
android.keylayout.sprd-keypad = /system/usr/keylayout/sprd-keypad.kl
android.keychar.sprd-keypad = /system/usr/keychars/sprd-keypad.kcm
ro.hardware =sphs
# Default network type
# 2 => AUTO Preferred.
ro.telephony.default_network = 2
# 1 => add volume control in in-call screen
ro.sprd.volume_control_icon = 1
#LCD_Density for WGVA
ro.sf.lcd_density = 160
dalvik.vm.heapsize=32m
ro.opengles.version=131072
ro.internalstorage.threshold=95
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.config.notification_sound=F1_New_MMS.ogg
ro.config.ringtone0=TwirlAway.ogg
ro.config.ringtone1=TwirlAway.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
persist.sys.language=en
persist.sys.country=GB
ro.com.android.dateformat=dd-MM-yyyy
ro.com.android.dataroaming=true
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
bcmdhd 287452 0 - Live 0xbf144000
ft5206_ts 12203 0 - Live 0xbf085000
snd_dummy 9403 0 - Live 0xbf07c000
mali 257904 2 - Live 0xbf02d000
ump 47582 29 mali, Live 0xbf019000
kt0812g_fm_ctrl 13623 0 - Live 0xbf00f000
headset 3092 0 - Live 0xbf009000
bma250e 12193 0 - Live 0xbf000000
RAM: 230 MB
System RAM: 230.000MB
Flash: 8 GB (7.402 GB actual); 0.5 GB (0.456 GB actual)
mmcblk0: 7.402 GB
mtdblock: 0.037 GB
mtdblock1: 0.456 GB
触摸屏为 sprd SPHS on Hsdroid
$28 [19]Flat 31.5*3.5mm Sapphire crystal For SEIKO SKX007 NEW SPRD MOD Watch glass AR blue Replacement parts
$2 SPRD Power ic SC2720A SC2721G SC2731G1 SC2712A SC2712B SC2712E
$23.78 Dia 2.5mm Fat Spring Bar Fits Seiko SKX007 SPRD Watch Bracelets Repair Tip Size 1.0mm Heavy Duty 20mm 22mm Strap Link Pins
$81.84 Special Modified Watch Needle C3 Green Luminous Watch Hands Fit Japan NH35A NH36A 7S 6R 4R For SKX007 SKX009 SPRD SPRE Tuna
$99.51 Mod Sub Style Silver Gold Rosegold Polished Stainless Steel Watch Bezel For Seiko SKX007 New SPRD Men's Machinery Diving Watch
$4.5 SPRD Power ic SC2720A SC2342A SC2342B SC2341B SC2721G SC2723G2 SC2712A SC2712B SC2712E
$80.18 28.5mm Watch Dial NH35 NH36 Green Luminous Dial fits Seiko SKX007 SPRD 6105 Tuna Samurai SPB185 Watch Case NH35 NH36 Watch Dials
$44.47 30.5mm Chapter Ring SKX007 Inner Ring fit For Seiko SKX007 SPRD Watch Case Gold/Silver/Rose Ring Diving Watch Case Ring
$48.2 SKX007 NH35 Watch Hands Fit NH36 NH35 Movement C3 Green Luminous Watch Hands for Seiko SKX007 SKX009 SPRD Men's Watches Repair
$35 Luminous Watch Hands NH35 Hands Fits Seiko SKX007 SKX009 SPRD Watch for NH36 NH36 4R35 7S Movement Men Watch Case Parts
$80.52 Watch Hands Fit Japan NH35A NH36A 7S 6R 4R With C3 Green Luminous For SKX007 SKX009 SPRD SPRE Tuna Canned Diving Turtle Watch
$28.87 30.5mm SKX007 Plastic Chapter Ring fits SKX007 SKX009 SPRD Watch Case NH35 Case Inner Ring Men's Diving watch parts
$53.35 Mod 30.5mm SKX007 Copper Chapter Ring fits Seiko SKX007 SKX009 SPRD Watch Case NH35 Case Inner Ring Men's Diving watch parts
$73.36 Seiko mod Watch Crown nh35 crown Engraved Signed 'S' Mod for Seiko SKX007 SKX009 SKX013 SPRD for 7s26 4R36 nh36 nh35 Movement
$14.5 22mm Diving Strap Steel Strap Watch Strap Replacement Accessories For Seiko No. 5 SKX007 SPRD series
$19 Stainless Steel Watch Strap 22mm Curved Solid End Links For Seiko SKX007/SPRD Watch Bracelet Oyster Brushed Finish With tools
$55.08 Watch accessories men for Seiko No.5 SPRD/New SRPD SKX007 series Gasket front/back cover Teflon water proof ring dust seal ring
$10 Black Watch Dial Parts Are Suitable for Seiko Skx007 Skx009 SPRD Fit sports NH35A NH36A 4R, 6R
$14.5 28.5mm Blue / Green Luminous Watch Dial Super bright calendar Parts For Seiko Skx007 Skx009 SPRD Fit Movement NH35A NH36A 4R, 6R
$86.63 NH35 NH36 Dial Green Luminous Watch Dial Fit for SKX007 SPRD 6105 Turtle Tuna Watch Case 28.5mm Watch Dials With Box Gifts Parts
新电池 sprd SPHS on Hsdroid
$99.51 Mod Sub Style Silver Gold Rosegold Polished Stainless Steel Watch Bezel For Seiko SKX007 New SPRD Men's Machinery Diving Watch
$4.5 SPRD Power ic SC2720A SC2342A SC2342B SC2341B SC2721G SC2723G2 SC2712A SC2712B SC2712E
$81.84 Special Modified Watch Needle C3 Green Luminous Watch Hands Fit Japan NH35A NH36A 7S 6R 4R For SKX007 SKX009 SPRD SPRE Tuna
$28 [19]Flat 31.5*3.5mm Sapphire crystal For SEIKO SKX007 NEW SPRD MOD Watch glass AR blue Replacement parts
$23.78 Dia 2.5mm Fat Spring Bar Fits Seiko SKX007 SPRD Watch Bracelets Repair Tip Size 1.0mm Heavy Duty 20mm 22mm Strap Link Pins
$2 SPRD Power ic SC2720A SC2721G SC2731G1 SC2712A SC2712B SC2712E
$44.47 30.5mm Chapter Ring SKX007 Inner Ring fit For Seiko SKX007 SPRD Watch Case Gold/Silver/Rose Ring Diving Watch Case Ring
$80.18 28.5mm Watch Dial NH35 NH36 Green Luminous Dial fits Seiko SKX007 SPRD 6105 Tuna Samurai SPB185 Watch Case NH35 NH36 Watch Dials
$48.2 SKX007 NH35 Watch Hands Fit NH36 NH35 Movement C3 Green Luminous Watch Hands for Seiko SKX007 SKX009 SPRD Men's Watches Repair
$35 Luminous Watch Hands NH35 Hands Fits Seiko SKX007 SKX009 SPRD Watch for NH36 NH36 4R35 7S Movement Men Watch Case Parts
$80.52 Watch Hands Fit Japan NH35A NH36A 7S 6R 4R With C3 Green Luminous For SKX007 SKX009 SPRD SPRE Tuna Canned Diving Turtle Watch
$28.87 30.5mm SKX007 Plastic Chapter Ring fits SKX007 SKX009 SPRD Watch Case NH35 Case Inner Ring Men's Diving watch parts
$53.35 Mod 30.5mm SKX007 Copper Chapter Ring fits Seiko SKX007 SKX009 SPRD Watch Case NH35 Case Inner Ring Men's Diving watch parts
$73.36 Seiko mod Watch Crown nh35 crown Engraved Signed 'S' Mod for Seiko SKX007 SKX009 SKX013 SPRD for 7s26 4R36 nh36 nh35 Movement
$14.5 22mm Diving Strap Steel Strap Watch Strap Replacement Accessories For Seiko No. 5 SKX007 SPRD series
$55.08 Watch accessories men for Seiko No.5 SPRD/New SRPD SKX007 series Gasket front/back cover Teflon water proof ring dust seal ring
$14.5 28.5mm Blue / Green Luminous Watch Dial Super bright calendar Parts For Seiko Skx007 Skx009 SPRD Fit Movement NH35A NH36A 4R, 6R
$10 Black Watch Dial Parts Are Suitable for Seiko Skx007 Skx009 SPRD Fit sports NH35A NH36A 4R, 6R
$68.24 NH35 NH36 Dial Green Luminous Watch Dial Fit for SKX007 SPRD 6105 Turtle Tuna Watch Case 28.5mm Watch Dials With Box Gifts Parts
$19 Stainless Steel Watch Strap 22mm Curved Solid End Links For Seiko SKX007/SPRD Watch Bracelet Oyster Brushed Finish With tools
占地面积 sprd SPHS on Hsdroid
$23.78 Dia 2.5mm Fat Spring Bar Fits Seiko SKX007 SPRD Watch Bracelets Repair Tip Size 1.0mm Heavy Duty 20mm 22mm Strap Link Pins
$99.51 Mod Sub Style Silver Gold Rosegold Polished Stainless Steel Watch Bezel For Seiko SKX007 New SPRD Men's Machinery Diving Watch
$2 SPRD Power ic SC2720A SC2721G SC2731G1 SC2712A SC2712B SC2712E
$4.5 SPRD Power ic SC2720A SC2342A SC2342B SC2341B SC2721G SC2723G2 SC2712A SC2712B SC2712E
$28 [19]Flat 31.5*3.5mm Sapphire crystal For SEIKO SKX007 NEW SPRD MOD Watch glass AR blue Replacement parts
$81.84 Special Modified Watch Needle C3 Green Luminous Watch Hands Fit Japan NH35A NH36A 7S 6R 4R For SKX007 SKX009 SPRD SPRE Tuna
$80.18 28.5mm Watch Dial NH35 NH36 Green Luminous Dial fits Seiko SKX007 SPRD 6105 Tuna Samurai SPB185 Watch Case NH35 NH36 Watch Dials
$44.47 30.5mm Chapter Ring SKX007 Inner Ring fit For Seiko SKX007 SPRD Watch Case Gold/Silver/Rose Ring Diving Watch Case Ring
$48.2 SKX007 NH35 Watch Hands Fit NH36 NH35 Movement C3 Green Luminous Watch Hands for Seiko SKX007 SKX009 SPRD Men's Watches Repair
$35 Luminous Watch Hands NH35 Hands Fits Seiko SKX007 SKX009 SPRD Watch for NH36 NH36 4R35 7S Movement Men Watch Case Parts
$80.52 Watch Hands Fit Japan NH35A NH36A 7S 6R 4R With C3 Green Luminous For SKX007 SKX009 SPRD SPRE Tuna Canned Diving Turtle Watch
$28.87 30.5mm SKX007 Plastic Chapter Ring fits SKX007 SKX009 SPRD Watch Case NH35 Case Inner Ring Men's Diving watch parts
$53.35 Mod 30.5mm SKX007 Copper Chapter Ring fits Seiko SKX007 SKX009 SPRD Watch Case NH35 Case Inner Ring Men's Diving watch parts
$19 Stainless Steel Watch Strap 22mm Curved Solid End Links For Seiko SKX007/SPRD Watch Bracelet Oyster Brushed Finish With tools
$10 Black Watch Dial Parts Are Suitable for Seiko Skx007 Skx009 SPRD Fit sports NH35A NH36A 4R, 6R
$73.36 Seiko mod Watch Crown nh35 crown Engraved Signed 'S' Mod for Seiko SKX007 SKX009 SKX013 SPRD for 7s26 4R36 nh36 nh35 Movement
$55.08 Watch accessories men for Seiko No.5 SPRD/New SRPD SKX007 series Gasket front/back cover Teflon water proof ring dust seal ring
$14.5 28.5mm Blue / Green Luminous Watch Dial Super bright calendar Parts For Seiko Skx007 Skx009 SPRD Fit Movement NH35A NH36A 4R, 6R
$86.63 NH35 NH36 Dial Green Luminous Watch Dial Fit for SKX007 SPRD 6105 Turtle Tuna Watch Case 28.5mm Watch Dials With Box Gifts Parts
$14.5 22mm Diving Strap Steel Strap Watch Strap Replacement Accessories For Seiko No. 5 SKX007 SPRD series
| Find Similar devices | |
|---|---|
| Same CPU: | |
| Same Display resolution: | |
| Same ro.build.description: | |
