alps I9300
Как разместить здесь свою спецификацию:

1. Установить SpecDevice
2. Запустить, сформируется спецификация
3. Скопировать ссылку (подробнее...)
Основные характеристики
Производительalps
МодельI9300
Версия Andriod4.0.9; eng.root.1350542258; SDK15
Процессор1 core; ARMv7 Processor rev 10 (v7l); Max: 1001,0 MHz; Min: 166,8 MHz
Дисплей854 x 480; DPI: 240; Evaluated Size: 4,1"
Сенсорный экранMultitouch 5 points
Графический ускорительPowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.8@789263
ОЗУ512 MB (486 MB available)
Память4 GB (3.631 GB actual); 32 GB (29.499 GB actual) (см. вкладку "Память")
Связь
ТелефонGSM, Dual SIM; Net: GPRS
WiFiwlan; IEEE 802.11 a/b/g/n; MediaTek MT6620; AP Mode
USB HostNo
BluetoothBluetooth 4.0+HS
GPSYes
Установленные компоненты
Главная камераPhoto: 8.0 MP; Max: 3264x2448; Focus: auto continuous-picture continuous-video macro infinity manual fullscan; Flash modes: auto on off torch
Доп. камераPhoto: 0.3 MP; Max size: 640x480; Focus: infinity; Flash modes: off
Датчикиbma222 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA;
tmd2771 Proximity Sensor (Capella); range: 0...1; resolution: 1 (100%); power: 0,13mA;
tmd2771 Light Sensor (Capella); range: 0...10240; resolution: 1 (0,01%); power: 0,13mA;
ВибраторYes
Языки43; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese
АккумуляторTechnology: Li-ion; Voltage: 3762
FM radio76 to 108MHz
SD Version:1.1 5

KERNEL: Linux version 3.0.13 (root@abcd-desktop) (gcc version 4.4.3 (GCC) ) #1 PREEMPT Thu Oct 18 14:37:21 CST 2012
CODENAME: REL
Mainboard: e1811_v75_zgtx7_9p017
BRAND: alps
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: e1811_v75_zgtx7_9p017
DISPLAY: ALPS.ICS.MP.V1.11
FINGERPRINT: alps/e1811_v75_zgtx7_9p017/e1811_v75_zgtx7_9p017:4.0.9/IML74K/1350542258:user/test-keys
HARDWARE: mt6575
ID: IML74K
TAGS: test-keys

Processor : ARMv7 Processor rev 10 (v7l)
BogoMIPS : 1993.93
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc09
CPU revision : 10
Hardware : MT6575
Revision : 65fb8a00
Serial : 0000000000000000

GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture

<4>[ 605.055105] [STP-PSM] [I]_stp_psm_do_wait: STP is waiting state for ACT, i=1
<4>[ 605.055981] [STP-PSM] [I]_stp_psm_do_wait: +Total waits for ACT takes 200 msec
<4>[ 605.056876] [STP-PSM] [I]_stp_psm_disable: PSM MODE Disable<============================
<4>[ 605.056883]
<7>[ 605.058125] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 10068923 > 8ms
<7>[ 605.058163] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<6>[ 605.058458] [WMT-DFT][I]hif_sdio_wifi_off:start!
<7>[ 605.058493] [298:ksdioirqd/mmc2] exit
<6>[ 605.058639] [WMT-DFT][I]hif_sdio_wifi_off:sdio_release_irq() for wifi ok
<5>[ 605.058656] [wlan] Remove wlan!
<5>[ 605.059084] [wlan]
<1>[ 605.059308] tx_thread should stop now...
<5>[ 605.059829] [wlan] mtk_sdiod stops
<7>[ 605.060246] [299:tx_thread] exit
<5>[ 605.060303] [wlan] mtk_sdiod stopped
<7>[ 605.067520] [1785:Smack Packet Re] sig 13 to [1785:Smack Packet Re]
<7>[ 605.076688] [2213:dmesg] exit
<7>[ 605.090422] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 10354077 > 8ms
<7>[ 605.090463] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<6>[ 605.095210] [wlan] QM: Enter qmFlushRxQueues()
<6>[ 605.095658] [wlan] QM: Enter qmFlushTxQueues()
<5>[ 605.095744] [wlan] Number of Stalled Packets = 0
<5>[ 605.096310] [wlan] unregistering netdev (0xcd60e000)
<6>[ 605.097085] [RTlog delete] fib_netdev_event() wlan0 NETDEV_DOWN!
<7>[ 605.104940] [275:CallbackHandler] fork err at pid
<7>[ 605.104966] [275:CallbackHandler] fork [2214:CallbackHandler]
<7>[ 605.108201] [1785:Smack Packet Re] exit
<7>[ 605.110357] [2214:CallbackHandler] set proc[2214] name: ->[Thread-199]
<7>[ 605.112822] [2214:Thread-199] exit
<7>[ 605.119168] [2213:dmesg] sig 17 to [2205:AsyncTask #2]
<5>[ 605.125107] [wlan] unregistration completed
<6>[ 605.125698] [WMT-DFT][I]hif_sdio_wifi_off:ok!
<4>[ 605.125715] mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[ 605.126387] mtk_wcn_cmb_sdio_off (3)
<3>[ 605.126400] msdc3 -> USR Suspend <- msdc_pm() : L<1411> PID<0x4f>
<6>[ 605.127305] [WMT-DFT][I]hif_sdio_remove:start!
<6>[ 605.127388] [WMT-DFT][I]hif_sdio_remove:sdio func(0xd3593ca0) is removed successfully!
<6>[ 605.128579] mmc2: card 0001 removed
<3>[ 605.135891] msdc3 -> save latch data<1> cmd<1> <- msdc_ops_set_ios() : L<3438> PID<0x4f>
<3>[ 605.137008] msdc3 -> set mclk to 0 <- msdc_set_mclk() : L<708> PID<0x4f>
<7>[ 605.140612] [2196:Thread-189] exit
<7>[ 605.150759] WQ_WARN: cpu:1, proc:kworker/u:3, dur: 12544000 > 8ms
<7>[ 605.150788] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 605.151041] [2201:Thread-191] exit
<3>[ 605.159334] [WMT-CORE][I]opfunc_func_off:WMT-CORE:Fun(3) [POWER_OFF] and power down chip
<4>[ 605.160342] [STP-PSM] [I]_stp_psm_disable: PSM MODE Disable=============================>
<4>[ 605.160348]
[STP-PSM] [I]_stp_psm_dump_active_q: Active op list:++
<4>[ 605.162134] [STP-PSM] [I]_stp_psm_dump_active_q: STP_OPID_PSM_WAKEUP
<4>[ 605.162923] [STP-PSM] [I]_stp_psm_dump_active_q: Active op list:--
<4>[ 605.163707] [STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<4>[ 605.167946] [STP-PSM] [I]_stp_psm_notify_wmt_wakeup_wq: OPID(1) type(0) bRet(1)
<4>[ 605.167954]
<4>[ 605.169050] [STP-PSM] [I]_stp_psm_do_wait: +Total waits for ACT takes 0 msec
<4>[ 605.169925] [STP-PSM] [I]_stp_psm_disable: PSM MODE Disable<============================
<4>[ 605.169932]
<6>[ 605.171116] [STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[ 605.171131] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[ 605.171145] [STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[ 605.172013] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(1)
<4>[ 605.172702] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[ 605.173408] [STP-PSM] [I]_stp_psm_set_state: work_state = ACT --> ACT
<4>[ 605.174204] Flush type = 4 Rx Queue
<5>[ 605.179643] [Power/Alarm] alarm 2 set 2479.778000000
<3>[ 605.185231] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(close_stp) result(0)
<3>[ 605.185990] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, hw_pwr_off start
<3>[ 605.186840] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, BGF_EINT IRQ unregistered and disabled
<3>[ 605.187956] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, ALL_EINT IRQ unregistered and disabled
<3>[ 605.189045] [WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[ 605.189803] [WMT-PLAT][E]wmt_plat_i2s_ctrl(1065):[MT6620]Error:FM digital mode set, but no I2S GPIOs defined
<3>[ 605.195058] [WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<3>[ 605.195842] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[ 605.196615] [WMT-PLAT][W]wmt_plat_gps_lna_ctrl:host gps lna pin not defined!!!
<3>[ 605.197527] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, hw_pwr_off finish
<3>[ 605.198387] [WMT-CORE][W]opfunc_pwr_off:HW_PWR_OFF ok
<3>[ 605.200137] [WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC OFF]status(b:0 f:0 g:0 w:0 lpbk:0 wmt:0 sd1:0 sd2:0 stp:0)
<6>[ 605.201476] [STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[ 605.201495] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(4) type(3) ok
<7>[ 605.225220] [2211:unloadDriverThr] exit
<7>[ 605.310648] [283:WifiStateMachin] fork err at pid
<7>[ 605.310674] [283:WifiStateMachin] fork [2215:WifiStateMachin]
<7>[ 605.313695] [2215:WifiStateMachin] set proc[2215] name: ->[loadDriverThrea]
<6>[ 605.361759] [WLAN] rfkill_set_block(blocked 0)
<6>[ 605.361769] [WLAN] Power on
<3>[ 605.361783] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[ 605.362561] [STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[ 605.362596] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[ 605.363661] [WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(not defined)
<3>[ 605.364409] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO124)
<3>[ 605.365153] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(not defined)
<3>[ 605.365924] [WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[ 605.366617] [WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO185)
<3>[ 605.367375] [WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(14)
<3>[ 605.368122] [WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO184)
<3>[ 605.368891] [WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(11)
<3>[ 605.369649] [WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<3>[ 605.370386] [WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[ 605.371127] [WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[ 605.371849] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[ 605.372574] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[ 605.373289] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[ 605.374025] [WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_CK(not defined)
<3>[ 605.374805] [WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_WS(not defined)
<3>[ 605.379670] [WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_DAT(not defined)
<3>[ 605.385676] [WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(GPIO206)
<7>[ 605.390126] [244:er.ServerThread] fork err at pid
<7>[ 605.390151] [244:er.ServerThread] fork [2216:er.ServerThread]
<3>[ 605.391848] [WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(not defined)
<3>[ 605.392636] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[ 605.393696] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<3>[ 605.394530] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<7>[ 605.395534] [2216:er.ServerThread] set proc[2216] name: ->[Thread-201]
<7>[ 605.396844] [2216:Thread-201] exit
<3>[ 605.397370] [WMT-PLAT][W]wmt_plat_gps_lna_ctrl:host gps lna pin not defined!!!
<3>[ 605.398265] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[ 605.605026] [WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[ 605.605785] [WMT-PLAT][E]wmt_plat_i2s_ctrl(1065):[MT6620]Error:FM digital mode set, but no I2S GPIOs defined
<3>[ 605.607003] [WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<3>[ 605.607953] [WMT-LIB][I]wmt_lib_ps_handler:MT6620 Not Ready, Dont Send Sleep/Wakeup Command
<4>[ 605.608986] [STP-PSM] [E]_stp_psm_notify_stp(990):ERROR! Invalid Action!!
<4>[ 605.608992]
<3>[ 605.610015] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[ 605.611103] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<4>[ 605.612163] mt6575_get_bus_freq() return 192400
<3>[ 605.612861] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[ 605.613601] Flush type = 4 Rx Queue
<3>[ 605.614368] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[ 605.615201] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[ 605.615214] [STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[ 605.615854] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[ 605.616559] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[ 605.617243] [STP-PSM] [I]_stp_psm_set_state: work_state = ACT --> ACT
<6>[ 605.618046] [STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[ 605.618056] [STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[ 605.618066] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<3>[ 605.623589] [WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6620)
<3>[ 605.629893] [WMT-IC][I]mt6620_ver_check:MT6620: read hw_ver (hw version) (0x8a11)
<3>[ 605.636273] [WMT-IC][I]mt6620_ver_check:MT6620: read fw_ver (rom version) (0x8a10)
<3>[ 605.637209] [WMT-IC][I]mt6620_find_wmt_ic_info:found ic info(0x8a11) by full match! index:3
<3>[ 605.638250] [WMT-IC][I]mt6620_ver_check:MT6620: wmt ic info: MT6620.E4 (0x8a11, WMTHWVER:3, patch_ext:_e3)
<3>[ 605.639451] [WMT-CORE][I]wmt_core_hw_check:chip id(0x6620) ver_check ok
<3>[ 605.650988] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[ 605.651797] [WMT-IC][I]mt6620_sw_init:WMT-CORE: change baudrate(4000000) ok
<3>[ 605.657905] [WMT-IC][I]mt6620_update_patch_name:full firmware patch name: /system/etc/firmware/mt6620_patch_e3_hdr.bin
<3>[ 605.662276] [WMT-IC][I]mt6620_patch_dwn:===========================================
<3>[ 605.663226] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Built Time = 20120320180900
<3>[ 605.664167] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[ 605.664968] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[ 605.665811] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Ph Ver = 0x001b
<3>[ 605.666608] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Platform = 1212
<3>[ 605.667404] [WMT-IC][I]mt6620_patch_dwn:===========================================
<3>[ 605.996341] [WMT-IC][I]mt6620_patch_dwn:wmt_core: patch dwn:0 frag(43, 752) ok
<3>[ 605.997358] [WMT-IC][I]mt6620_sw_init:Not to check the patch validity
<3>[ 605.998540] [WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf12d030)
<3>[ 606.003090] [WMT-IC][I]mt6620_sw_init:init_coex ok
<6>[ 606.004076] [STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[ 606.004088] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<3>[ 606.004099] [WMT-IC][I]mt6620_sw_init:enable host STP-UART-FULL mode
<3>[ 606.017011] [WMT-IC][I]mt6620_sw_init:set fm mode (2) ok
<6>[ 606.017667] [STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[ 606.017679] [STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[ 606.017691] mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[ 606.018361] board_sdio_ctrl force off before on
<6>[ 606.018368] mtk_wcn_cmb_sdio_off (3)
<6>[ 606.018408] mtk_wcn_cmb_sdio_on (3)
<3>[ 606.018441] msdc3 -> USR Resume <- msdc_pm() : L<1436> PID<0x4f>
<3>[ 606.035213] msdc3 -> ================ <- msdc_set_mclk() : L<756> PID<0x63f>
<3>[ 606.036231] msdc3 -> !!! Set<400KHz> Source<197000KHz> -> sclk<397KHz> DDR<0> mode<0> div<124> <- msdc_set_mclk() : L<758> PID<0x63f>
<3>[ 606.037863] msdc3 -> ================ <- msdc_set_mclk() : L<759> PID<0x63f>
<3>[ 606.063604] msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1496> PID<0x63f>
<3>[ 606.085753] msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<3421> PID<0x63f>
<3>[ 606.086911] msdc3 -> ================ <- msdc_set_mclk() : L<756> PID<0x63f>
<3>[ 606.087925] msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<758> PID<0x63f>
<3>[ 606.089579] msdc3 -> ================ <- msdc_set_mclk() : L<759> PID<0x63f>
<6>[ 606.091405] mmc2: new high speed SDIO card at address 0001
<6>[ 606.097456] [WMT-DFT][I]hif_sdio_probe:start!
<6>[ 606.097472] [WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x20a) num(0x1)
<6>[ 606.097481] [WMT-DFT][I]hif_sdio_probe:card->info[0]: MediaTek MT6620 Wireless Combo Chip
<6>[ 606.097491] [WMT-DFT][I]hif_sdio_probe:card->info[1]:
<6>[ 606.097498] [WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[ 606.097581] [WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(520192)
<7>[ 606.097610] WQ_WARN: cpu:1, proc:kworker/u:3, dur: 77434385 > 8ms
<7>[ 606.097629] work: mmc_rescan+0x0/0x370
<6>[ 606.175024] [WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[ 606.175117] [2:kthreadd] fork err at pid
<7>[ 606.175137] [2:kthreadd] fork [2217:kthreadd]
<6>[ 606.175160] [WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<5>[ 606.175190] [wlan] net_device prDev(0xc7202000) allocated
<4>[ 606.176140] [RT_MONITOR]WARNNING [2217:ksdioirqd/mmc2] SET NOT ALLOW RT Prio [1] for proc [2217:ksdioirqd/mmc2]
<4>[ 606.177561] Backtrace:
<4>[ 606.177993] [] (dump_backtrace+0x0/0x10c) from [] (dump_stack+0x18/0x1c)
<4>[ 606.179192] r7:00000001 r6:00000000 r5:cd464000
<5>[ 606.180663] [wlan] Open FW image: WIFI_RAM_CODE done
<4>[ 606.181677] r4:c5167800
<4>[ 606.181998] [] (dump_stack+0x0/0x1c) from [] (__sched_setscheduler+0x490/0x5c8)
<4>[ 606.183122] [] (__sched_setscheduler+0x0/0x5c8) from [] (sched_setscheduler+0x14/0x18)
<4>[ 606.184330] [] (sched_setscheduler+0x0/0x18) from [] (sdio_irq_thread+0x38/0x2c4)
<4>[ 606.185578] [] (sdio_irq_thread+0x0/0x2c4) from [] (kthread+0x90/0x98)
<5>[ 606.187208] [wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[ 606.188119] [wlan] Virtual Address = dedac000 for COMMON MGMT MEMORY POOL.
<5>[ 606.188962] [wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[ 606.189619] [wlan] Virtual Address = dedae000 for SW_RFB_T.
<5>[ 606.190305] [wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[ 606.190993] [wlan] Virtual Address = dedb2000 for MSDU_INFO_T.
<6>[ 606.191726] [wlan] wlanAdapterStart(): Acquiring LP-OWN
<4>[ 606.192189] [] (kthread+0x0/0x98) from [] (do_exit+0x0/0x6e4)
<4>[ 606.193114] r7:00000013 r6:c0087fc0 r5:c009f640 r4:dd7c1d78
<6>[ 606.215077] [wlan] Chip ID: 0x6620
<6>[ 606.215090] [wlan] Revision ID: 0x1
<7>[ 606.763914] [1784:Smack Packet Wr] exit
<7>[ 606.813954] [2198:com.specdevice] exit
<6>[ 606.872020] [wlan] wlanAdapterStart(): Waiting for Ready bit..
<6>[ 607.105060] [wlan] Ready bit asserted
<5>[ 607.133756] [wlan] [wifi] wlan%d netif_carrier_off
<6>[ 607.134346] [wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[ 607.134420] [wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[ 607.134512] [wlan] Domain: map=0, idx=0, code=0x0000
<7>[ 607.135460] [2:kthreadd] fork err at pid
<7>[ 607.135484] [2:kthreadd] fork [2218:kthreadd]
<5>[ 607.135517] [wlan] tx_thread starts running...
<6>[ 607.137127] [WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(20a) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[ 607.137141] [WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[ 607.137158] [WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[ 607.138485] [STP-PSM] [I]_stp_psm_enable: PSM MODE Enable==============================>
<4>[ 607.138492]
[STP-PSM] [I]_stp_psm_dump_active_q: Active op list:++
<4>[ 607.140288] [STP-PSM] [I]_stp_psm_dump_active_q: STP_OPID_PSM_WAKEUP
<4>[ 607.141078] [STP-PSM] [I]_stp_psm_dump_active_q: Active op list:--
<4>[ 607.150579] [STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<4>[ 607.151631] [STP-PSM] [I]_stp_psm_notify_wmt_wakeup_wq: OPID(1) type(0) bRet(1)
<4>[ 607.151637]
<4>[ 607.152729] [STP-PSM] [I]_stp_psm_do_wait: +Total waits for ACT takes 0 msec
<4>[ 607.153613] [STP-PSM] [I]_stp_psm_enable: PSM MODE Enable<=============================
<4>[ 607.153619]
<3>[ 607.155118] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<7>[ 607.157421] [2215:loadDriverThrea] exit
<7>[ 607.164409] [157:netd] fork err at pid
<7>[ 607.164437] [157:netd] fork [2219:netd]
<7>[ 607.166595] [2219:netd] set proc[2219] name: ->[ip]
<7>[ 607.168729] [2219:ip] exit
<7>[ 607.168948] [2219:ip] sig 17 to [157:netd]
<7>[ 607.172599] [1599:kworker/u:3] fork err at pid
<7>[ 607.172623] [1599:kworker/u:3] fork [2220:kworker/u:3]
<7>[ 607.172856] [2220:kworker/u:3] fork err at pid
<7>[ 607.172873] [2220:kworker/u:3] fork [2221:kworker/u:3]
<7>[ 607.172915] [2221:kworker/u:3] exit
<7>[ 607.172941] [2221:kworker/u:3] sig 17 to [2220:kworker/u:3]
<7>[ 607.172974] [2220:kworker/u:3] exit
<6>[ 607.174660] [RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[ 607.174682] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[ 607.195574] [1:init] fork err at pid
<7>[ 607.195601] [1:init] fork [2222:init]
<7>[ 607.196482] [283:WifiStateMachin] fork err at pid
<7>[ 607.196506] [283:WifiStateMachin] fork [2223:WifiStateMachin]
<7>[ 607.196794] WQ_WARN: cpu:0, proc:kworker/0:1, dur: 21715076 > 8ms
<7>[ 607.196866] work: wlanSetMulticastListWorkQueue+0x0/0x1f4 [wlan]
<7>[ 607.197030] [2223:WifiStateMachin] set proc[2223] name: ->[WifiMonitor]
<7>[ 607.200296] [2222:init] set proc[2222] name: ->[logwrapper]
<7>[ 607.202154] [2222:logwrapper] fork err at pid
<7>[ 607.202179] [2222:logwrapper] fork [2224:logwrapper]
<7>[ 607.204233] [2224:logwrapper] set proc[2224] name: ->[wpa_supplicant]
<0>[ 607.305867] [LED]button-backlight:0
<4>[ 607.306296] mt65xx_leds_set_cust: set brightness, name:button-backlight, mode:3, level:0
<0>[ 607.307300] [LED]PMIC#0:0
<6>[ 607.307629] [Power/PMIC] [hwBacklightKPLEDTurnOff]...........
<5>[ 607.308209] [wlan] N=0 closed
<5>[ 607.308645] [wlan] EVENT-ROAMING ABORT: Current Time = 246140
<5>[ 607.309351] [wlan] [13] TRANSITION: [0] -> [0]
<6>[ 607.314851] [wlan] NAF=0,0,0
<6>[ 607.314865] [wlan] NAF=0,0,0
<5>[ 607.476024] [wlan] [13] TRANSITION: [0] -> [2]
<5>[ 607.546648] [Power/Alarm] alarm 0 set 1375557801.202000000
<5>[ 607.902811] [wlan] [13] TRANSITION: [2] -> [0]
<6>[ 607.905349] [wlan] NAF=0,0,0
<5>[ 607.906306] [wlan] N=0 closed
<5>[ 607.906674] [wlan] EVENT-ROAMING ABORT: Current Time = 246740
<5>[ 607.907385] [wlan] [13] TRANSITION: [0] -> [0]
<5>[ 607.907938] [wlan] [13] TRANSITION: [0] -> [1]
<5>[ 607.908498] [wlan] [13] TRANSITION: [1] -> [6]
<5>[ 607.909043] [wlan] ChReq net=0 token=1 b=1 c=8 s=0
<6>[ 607.913237] [wlan] NAF=0,0,0
<5>[ 607.913548] [wlan] ChGrant net=0 token=1 ch=8 sco=0
<5>[ 607.914170] [wlan] [13] TRANSITION: [6] -> [7]
<5>[ 607.914726] [wlan] STA 40mAllowed=1
<6>[ 607.922734] [wlan] Wait Cmd TxSeqNum:1
<6>[ 607.925440] [wlan] EVENT_ID_TX_DONE PacketSeq:1 ucStatus: 0 SN: 26
<6>[ 607.931717] [wlan] Wait Cmd TxSeqNum:2
<6>[ 607.938649] [wlan] EVENT_ID_TX_DONE PacketSeq:2 ucStatus: 0 SN: 27
<6>[ 607.938688] [wlan] QM: (fgIsWmmSupported=0, fgSupportQoS=1)
<5>[ 607.938709] [wlan] N=0 b=1 c=8 s=0 e=0 h=3 I=0x00 l=1 p=1
<5>[ 607.939390] [wlan]
<4>[ 607.939620] a0:21:b7:bc:97:3e [17] TRANSITION: [0] -> [3]
<4>[ 607.939624]
<5>[ 607.953745] [wlan] [wifi] wlan0 netif_carrier_on [ssid:der55 a0:21:b7:bc:97:3e]
<5>[ 607.954648] [wlan] EVENT-ROAMING START: Current Time = 246780
<5>[ 607.959215] [wlan] [27] TRANSITION: [0] -> [1]
<5>[ 607.959760] [wlan] [13] TRANSITION: [7] -> [10]
<6>[ 607.964469] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<7>[ 607.964608] WQ_WARN: cpu:0, proc:kworker/0:1, dur: 10873538 > 8ms
<7>[ 607.964626] work: linkwatch_event+0x0/0x3c
<5>[ 607.969818] [wlan] QM:Event +RxBa
<5>[ 607.970224] [wlan] QM: +RxBA(STA=0 TID=0 WinStart=0 WinEnd=19 WinSize=20)
<5>[ 607.981280] [wlan] QM: +STA[0]
<7>[ 607.981843] WQ_WARN: cpu:0, proc:kworker/0:1, dur: 17201769 > 8ms
<7>[ 607.981915] work: wlanSetMulticastListWorkQueue+0x0/0x1f4 [wlan]
<5>[ 608.010348] [wlan] N=0 b=1 c=8 s=0 e=0 h=3 I=0x00 l=1 p=1
<7>[ 608.076809] [2159:ndroid.settings] fork err at pid
<7>[ 608.076834] [2159:ndroid.settings] fork [2225:ndroid.settings]
<7>[ 608.080369] [2225:ndroid.settings] set proc[2225] name: ->[SharedPreferenc]
<7>[ 608.085984] [2159:ndroid.settings] fork err at pid
<7>[ 608.086011] [2159:ndroid.settings] fork [2226:ndroid.settings]
<7>[ 608.100456] [2226:ndroid.settings] set proc[2226] name: ->[IntentService[A]
<7>[ 608.111324] [2205:AsyncTask #2] fork err at pid
<7>[ 608.111353] [2205:AsyncTask #2] fork [2227:AsyncTask #2]
<5>[ 608.120935] [wlan] N=0 b=1 c=8 s=0 e=0 h=3 I=0x00 l=1 p=1
<3>[ 608.129086] binder: 1921: binder_alloc_buf, no vma
<3>[ 608.129679] binder: 229:513 buffer allocation failed
<6>[ 608.130296] binder: 229:513 transaction failed 29201, size 1824-0
<7>[ 608.154599] [2227:AsyncTask #2] set proc[2227] name: ->[dmesg]
<7>[ 608.158161] [2225:SharedPreferenc] exit

# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IML74K
ro.build.display.id=ALPS.ICS.MP.V1.11
ro.build.version.incremental=eng.root.1350542258
ro.custom.build.version=1350542258
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.9
ro.build.date=2012年 10月 18日 星期四 19:35:37 CST
ro.build.date.utc=1350560137
ro.build.type=user
ro.build.user=root
ro.build.host=agold-abcd-desktop
ro.build.tags=test-keys
ro.product.model=I9300
ro.product.brand=alps
ro.product.name=e1811_v75_zgtx7_9p017
ro.product.device=e1811_v75_zgtx7_9p017
ro.product.board=e1811_v75_zgtx7_9p017
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=alps
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=e1811_v75_zgtx7_9p017
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=e1811_v75_zgtx7_9p017-user 4.0.9 IML74K eng.root.1350542258 test-keys
ro.build.fingerprint=alps/e1811_v75_zgtx7_9p017/e1811_v75_zgtx7_9p017:4.0.9/IML74K/1350542258:user/test-keys
ro.build.flavor=
persist.sys.timezone=
ro.build.characteristics=default
ro.build.shutdown.animation=yes
ro.build.tv.location=-1
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=ALPS.ICS.MP.V1.11
ro.mediatek.platform=MT6575
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.ICS.MP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=128m
# Encrypt phone function
ro.crypto.tmpfs_options=mode=0771,uid=1000,gid=1000
ro.crypto.fs_type=ext4
ro.crypto.fs_real_blkdev=/emmc@usrdata
ro.crypto.fs_mnt_point=/data
ro.crypto.fs_options=noauto_da_alloc
ro.crypto.fs_flags=0x00000406
# audio
ro.camera.sound.forced=0
ro.audio.silent=0
# USB Config Type
ro.sys.usb.storage.type=mtp,mass_storage
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.sf.hwrotation=0
ril.current.share_modem=2
launcherplus.allappsgrid=2d
launcher2.allappsgrid=3d_20
curlockscreen=2
ro.mediatek.gemini_support=true
drm.service.enabled=true
persist.radio.fd.counter=20
persist.radio.fd.off.counter=20
ro.config.notification_sound=Whistle.ogg
ro.config.alarm_alert=Walk_in_the_forest.ogg
ro.config.ringtone=S_Over_the_horizon.ogg
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt

wlan 285284 0 - Live 0xbf1e3000 (P)
cfg80211 122425 0 - Live 0xbf1ba000
mtk_fm_priv 8909 0 - Live 0xbf1b4000 (P)
mt6620_fm_drv 111369 1 mtk_fm_priv, Live 0xbf18c000
mtk_stp_bt 39718 0 - Live 0xbf17f000
mtk_stp_gps 37190 0 - Live 0xbf172000
mtk_stp_uart 21669 1 - Live 0xbf169000 (P)
mtk_stp_wmt 343806 7 wlan,mtk_fm_priv,mt6620_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf108000 (P)
mtk_hif_sdio 18042 2 wlan,mtk_stp_wmt, Live 0xbf0ff000
devinfo 748 0 - Live 0xbf0fb000 (P)
sec 109563 0 - Live 0xbf0da000 (P)
mt6575_vcodec_kernel_driver 23817 0 - Live 0xbf0cf000 (P)
mt6575_m4u 108821 6 - Live 0xbf0ab000 (P)
ccmni 17214 0 - Live 0xbf0a2000 (P)
ccci 137954 15 ccmni, Live 0xbf075000 (P)
ccci_plat 125084 3 sec,ccmni,ccci, Live 0xbf04e000 (P)
mtk_drvb 5115 0 - Live 0xbf049000 (P)
mtklfb 14369 0 - Live 0xbf041000
pvrsrvkm 163615 75 mtklfb, Live 0xbf00d000
alps_core 2221 0 - Live 0xbf009000 (P)
aed 15834 3 - Live 0xbf000000 (P)

RAM: 512 MB (486 MB available)

System RAM: 486.000MB
mtkfb.0: 4.000MB


Flash: 4 GB (3.631 GB actual); 32 GB (29.499 GB actual)

mmcblk0: 3.631 GB
mmcblk1: 29.499 GB


Тачскрин для alps I9300

$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft

$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch

$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k

$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K

$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm

$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle

$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L

$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers

$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch

$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin

Новый аккумулятор для alps I9300

$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft

$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k

$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch

$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K

$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm

$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle

$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L

$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch

$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers

$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin

Чехлы для alps I9300

$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k

$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch

$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft

$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K

$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm

$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle

$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L

$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin

$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch

$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers

Найти похожие устройства
Same CPU:
Same Display resolution:
Same ro.build.description:

NEW: Переход к полной базе данных >>>

Последние:

PANASONIC P-02D
alps A73_5G
Xiaomi 22011119UY
alps S24 Ultra
alps ZQ9109
motorola moto e32
alps g6tr1_dx_c58
A15 Max
INFINIX Infinix X6528B
wanjiang LZN projector
S9 Ultra
alps S24 Ultra
A10 Pro
realme RMX3834
Китай Xiaomi Pad 6
alps X6 Por
A19 Pro
Galaxy S23 Ultra 5G S23_KOREA
samsung SM-J701F
PYT PA15
samsung SM-G988B
S9 Ultra
konka android tv350 cy300
china fake N8000
alps Galaxy S23 Ultra
A10 Pro
Galaxy S22 Ultra 5G SM-S908U
samsung SM-G930V
samsung SM-A505FM
alps YT9216CJ
sprd UIS8581A
alps S23_Pro
alps S24_Ultra
L16 Max
S9 Ultra
alps S23 Ultra
pro14 pro11
alps Pova 5 Pro
MBX MoreTV 1.0
Xiaomi M2101K7BL
Mi Pad 6 Pro
Mate50
A19 Pro
alps i14PROMAX
Xiaomi 2201117SI
NUMVIBE X30Pro
Pad_Ultra
INFINIX Infinix X6835B
Xiaomi Redmi 5 Plus
Cat S62 Pro