- General
- Detalles OS
- CPU info
- GPU extensiones
- Mensajes del kernel WiFi
- build.prop
- Módulos
- Mapa de la memoria
Especificaciones generales | |
---|---|
Marca | GT-I9500 |
Modelo | S4 |
Versión de Android | 4.2.2; eng.root.1376116669; SDK15 |
CPU | 4 cores; ARMv7 Processor rev 10 (v7l) SMDK4x12; Max: 1890.0 MHz; Min: 384.0 MHz |
Pantalla | 800 x 480; DPI: 240; Evaluated Size: 3.9" |
Pantalla táctil | Multitouch 2 points |
GPU | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.8@905891 |
RAM | 512 MB (496 MB available) |
Flash | 4 GB (3.600 GB actual) (ver pestaña de mapa de memoria) |
Comunicaciones | |
Teléfono | GSM, Dual SIM |
WiFi | wlan_mt6628; IEEE 802.11 b/g/n; MediaTek MT6628; AP Mode |
USB Host | Yes |
Bluetooth | Bluetooth 3.0+HS, 4.0 |
GPS | Yes |
Funciones avanzadas | |
Cámara frontal | Photo: 12.8 MP; Max: 4128x3096; Focus: auto continuous-picture continuous-video macro infinity manual fullscan; Flash modes: auto on off torch |
Cámara trasera | Photo: 1.9 MP; Max size: 1800x1080; Focus: infinity; No flash |
Sensores | mmc328x 3-axis Magnetic Field sensor (Aichi Steel); range: 0...600; resolution: 0.002 (0%); power: 0.25mA; |
mc3210 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0.004 (0.012%); power: 0.13mA; | |
stk31xx Proximity Sensor (Capella); range: 0...1; resolution: 1 (100%); power: 0.13mA; | |
stk31xx Light Sensor (Capella); range: 0...10240; resolution: 1 (0.01%); power: 0.13mA; | |
Alarma vibrante | Yes |
Idiomas soportados | 43; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
Batería | Technology: Li-ion; Voltage: 3802 |
FM radio | Supported by chipset |
Owner's comment: | China Clone |
SD Version: | 1.1 5 |
KERNEL: Linux version 3.0.13 (root@xuzhen) (gcc version 4.4.3 (GCC) ) #5 PREEMPT Wed Aug 28 17:04:36 CST 2013
CODENAME: REL
Mainboard: GT-I9500
BRAND: samsung
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: GT-I9500
DISPLAY: JDQ39.I9500ZHUAMDE
FINGERPRINT: alps/mobitek75_ics2/mobitek75_ics2:4.0.4/IMM76D/1376116669:user/test-keys
HARDWARE: mt6575
ID: IMM76D
TAGS: test-keys
Processor : ARMv7 Processor rev 10 (v7l)
BogoMIPS : 1993.93
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc09
CPU revision : 10
Hardware : SAMSUNG JF
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<7>[ 568.623352] (0)[2301:dmesg] exit
<7>[ 568.623515] (0)[2301:dmesg] sig 17 to [2294:AsyncTask #2]
<7>[ 568.641973] (0)[300:WifiStateMachin] fork [2302:WifiStateMachin]
<7>[ 568.643450] (0)[2302:WifiStateMachin] set proc[2302] name: ->[loadDriverThrea]
<6>[ 568.675322] (0)[WLAN] rfkill_set_block(blocked 0)
<6>[ 568.675333] (0)[WLAN] Power on
<3>[ 568.675345] (0)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[ 568.675361] (0)[STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[ 568.675396] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[ 568.675408] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(not defined)
<3>[ 568.675417] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO122)
<3>[ 568.675425] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(not defined)
<3>[ 568.675434] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[ 568.675443] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO13)
<3>[ 568.675452] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(14)
<3>[ 568.675461] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO15)
<3>[ 568.675470] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(1)
<3>[ 568.675479] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<3>[ 568.675488] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[ 568.675497] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[ 568.675505] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[ 568.675514] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[ 568.675522] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[ 568.675531] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:FM digital mode is not set, no need for I2S GPIOs
<3>[ 568.675541] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(GPIO206)
<3>[ 568.675550] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(not defined)
<3>[ 568.675559] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[ 568.675570] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<3>[ 568.675580] (0)[WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 568.675589] (0)[WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[ 568.675602] (0)[WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 568.675612] (0)[WMT-PLAT][W]wmt_plat_gps_lna_ctrl:host gps lna pin not defined!!!
<3>[ 568.675622] (0)[WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<7>[ 568.680868] (0)[257:er.ServerThread] fork [2303:er.ServerThread]
<7>[ 568.683268] (0)[2303:er.ServerThread] set proc[2303] name: ->[Thread-272]
<7>[ 568.684618] (0)[2303:Thread-272] exit
<3>[ 568.879691] (0)[WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[ 568.879772] (0)[WMT-PLAT][I]wmt_plat_i2s_ctrl:[MT662x]warnning:FM digital mode is not set, no I2S GPIO settings should be modified by combo driver
<3>[ 568.879883] (0)[WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<4>[ 568.880129] (0)[STP-PSM] [E]_stp_psm_notify_stp(1147):ERROR! Invalid Action!!
<4>[ 568.880161] (0)
<3>[ 568.880246] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[ 568.880311] (0)[WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 568.880370] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<4>[ 568.880935] (0)mt6575_get_bus_freq() return 260000
<3>[ 568.881469] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[ 568.881525] (0)Flush type = 4 Rx Queue
<3>[ 568.883236] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[ 568.883315] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[ 568.883371] (0)[STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[ 568.883418] (0)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[ 568.883470] (0)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<6>[ 568.883536] (0)[STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[ 568.883587] (0)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[ 568.883645] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[ 568.883702] (0)[STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[ 568.889608] (0)[WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6628)
<3>[ 568.895999] (0)[WMT-IC][I]mt6628_ver_check:MT6628: read hw_ver (hw version) (0x8b10)
<3>[ 568.903121] (0)[WMT-IC][I]mt6628_ver_check:MT6628: read fw_ver (rom version) (0x8b10)
<3>[ 568.903204] (0)[WMT-IC][I]mt6628_find_wmt_ic_info:found ic info(0x8b10) by full match! index:2
<3>[ 568.903281] (0)[WMT-IC][I]mt6628_ver_check:MT6628: wmt ic info: MT6628.E3 (0x8b10, WMTHWVER:2, patch_ext:_e2)
<3>[ 568.903353] (0)[WMT-CORE][I]wmt_core_hw_check:chip id(0x6628) ver_check ok
<3>[ 568.915124] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[ 568.915197] (0)[WMT-IC][I]mt6628_sw_init:WMT-CORE: change baudrate(4000000) ok
<3>[ 568.928753] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(srh_patch) result(0)
<3>[ 568.928830] (0)[WMT-IC][I]mt6628_patch_dwn:valid patch found: (/system/etc/firmware//mt6628_patch_e2_hdr.bin)
<3>[ 568.930054] (0)[WMT-IC][I]mt6628_patch_dwn:===========================================
<3>[ 568.930128] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Built Time = 20120913160625a
<3>[ 568.930189] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[ 568.930243] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[ 568.930297] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Ph Ver = 0x0010
<3>[ 568.930349] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Platform = 1226
<3>[ 568.930399] (0)[WMT-IC][I]mt6628_patch_dwn:===========================================
<3>[ 569.053937] (0)[WMT-CTRL][W]wmt_ctrl_rx:wmt_ctrl_rx be signaled, but no rx data(200)
<3>[ 569.091981] (0)[WMT-IC][I]mt6628_patch_dwn:wmt_core: patch dwn:0 frag(22, 796) ok
<3>[ 569.092692] (0)[WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf1451ec)
<3>[ 569.093715] (0)[WMT-IC][I]mt6628_sw_init:init_coex ok
<6>[ 569.097384] (0)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[ 569.097431] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[ 569.097473] (0)[STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[ 569.097508] (0)[WMT-IC][I]mt6628_sw_init:enable host STP-UART-FULL mode
<3>[ 569.111590] (0)[WMT-IC][I]mt6628_sw_init:co-clock disabled.
<3>[ 569.120235] (0)[WMT-IC][I]mt6628_sw_init:set fm mode (2) ok
<3>[ 569.120279] (0)[WMT-IC][I]mt6628_sw_init:disable mt662x firmware coredump
<6>[ 569.120320] (0)[STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[ 569.120361] (0)[STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[ 569.120397] (0)mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[ 569.120423] (0)board_sdio_ctrl force off before on
<6>[ 569.120446] (0)mtk_wcn_cmb_sdio_off (3)
<6>[ 569.121423] (0)mtk_wcn_cmb_sdio_on (3)
<3>[ 569.121496] (0)msdc3 -> USR Resume <- msdc_pm() : L<1568> PID
<3>[ 569.139738] (0)msdc3 -> ================ <- msdc_set_mclk() : L<833> PID
<3>[ 569.139806] (0)msdc3 -> !!! Set<400KHz> Source<197000KHz> -> sclk<397KHz> DDR<0> mode<0> div<124> <- msdc_set_mclk() : L<835> PID
<3>[ 569.139861] (0)msdc3 -> ================ <- msdc_set_mclk() : L<836> PID
<3>[ 569.165346] (0)msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1629> PID
<3>[ 569.179783] (0)msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<3860> PID
<3>[ 569.179890] (0)msdc3 -> ================ <- msdc_set_mclk() : L<833> PID
<3>[ 569.179982] (0)msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<835> PID
<3>[ 569.180066] (0)msdc3 -> ================ <- msdc_set_mclk() : L<836> PID
<6>[ 569.186490] (0)mmc2: new high speed SDIO card at address 0001
<6>[ 569.201811] (0)[WMT-DFT][I]hif_sdio_probe:start!
<6>[ 569.201873] (0)[WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x6628) num(0x1)
<6>[ 569.201925] (0)[WMT-DFT][I]hif_sdio_probe:card->info[0]: 6628
<6>[ 569.201970] (0)[WMT-DFT][I]hif_sdio_probe:card->info[1]: Combo
<6>[ 569.202013] (0)[WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[ 569.202055] (0)[WMT-DFT][I]hif_sdio_probe:card->info[3]:
<6>[ 569.204261] (0)[WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(520192)
<7>[ 569.204419] (0)WQ_WARN: cpu:1, proc:kworker/u:3, [mmc_rescan+0x0/0x3c0]dur: 76759616 > 15ms
<6>[ 569.279642] (0)[WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[ 569.279986] (0)[2:kthreadd] fork [2304:kthreadd]
<6>[ 569.280098] (0)[WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<5>[ 569.280214] (0)[wlan] net_device prDev(0xd58a6000) allocated
<5>[ 569.295248] (0)[wlan] Open FW image: WIFI_RAM_CODE done
<4>[ 569.298238] (0)[RT_MONITOR]WARNNING [2304:ksdioirqd/mmc2] SET NOT ALLOW RT Prio [1] for proc [2304:ksdioirqd/mmc2]
<5>[ 569.303720] (0)[wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[ 569.304168] (0)[wlan] Virtual Address = dff7d000 for COMMON MGMT MEMORY POOL.
<5>[ 569.304242] (0)[wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[ 569.304335] (0)[wlan] Virtual Address = dff7f000 for SW_RFB_T.
<5>[ 569.304396] (0)[wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[ 569.304487] (0)[wlan] Virtual Address = dff83000 for MSDU_INFO_T.
<6>[ 569.304553] (0)[wlan] wlanAdapterStart(): Acquiring LP-OWN
<6>[ 569.319678] (0)[wlan] Chip ID: 0x6628
<6>[ 569.319735] (0)[wlan] Revision ID: 0x0
<5>[ 569.504027] (0)[Power/Alarm] alarm_timer_triggered type 3 at 569.476007038 (1)
<5>[ 569.504538] (0)[Power/Alarm] alarm 3 set 900.000000000
<5>[ 569.507313] (0)[Power/Alarm] alarm wait (0x0)
<5>[ 569.508541] (0)[Power/Alarm] alarm 3 set 629.476000000
<1>[ 569.659442] (0)[FM_NTC | MAIN]timer --->lock, cnt=0, pid=76
<1>[ 569.659460] (0)[FM_NTC | MAIN]timer <---unlock, cnt=1, pid=76
<1>[ 569.659484] (0)[FM_NTC | MAIN]rds_data --->lock, cnt=0, pid=48
<1>[ 569.659493] (0)[FM_NTC | MAIN]rds_data <---unlock, cnt=1, pid=48
<6>[ 570.083428] (0)[wlan] wlanAdapterStart(): Waiting for Ready bit..
<6>[ 570.099586] (0)[wlan] Ready bit asserted
<5>[ 570.141434] (0)[wlan] RF CAL FAIL = (0),BB CAL FAIL = (0)
<5>[ 570.143264] (0)[wlan] [wifi] wlan%d netif_carrier_off
<6>[ 570.143282] (0)[wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[ 570.143342] (0)[wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[ 570.143428] (0)[wlan] Domain: map=0, idx=0, code=0x0000
<7>[ 570.143715] (0)[2:kthreadd] fork [2305:kthreadd]
<5>[ 570.143749] (0)[wlan] tx_thread starts running...
<6>[ 570.250692] (0)[WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(6628) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[ 570.250763] (0)[WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[ 570.250847] (0)[WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 coredump:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[ 570.250992] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<3>[ 570.251099] (0)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<4>[ 570.251438] (0)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<7>[ 570.261113] (0)[2302:loadDriverThrea] exit
<6>[ 570.281146] (0)[RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[ 570.281170] (0)ADDRCONF(NETDEV_UP): wlan0: link is not ready
<5>[ 570.296371] (0)[Power/Battery] [use_chip_trim_value] 3462 -> 3444
<7>[ 570.299818] (0)WQ_WARN: cpu:0, proc:kworker/0:3, [wlanSetMulticastListWorkQueue+0x0/0x1f4 [wlan_mt6628]]dur: 20170616 > 15ms
<7>[ 570.305825] (0)[1:init] fork [2306:init]
<7>[ 570.307328] (0)[300:WifiStateMachin] fork [2307:WifiStateMachin]
<5>[ 570.307361] (0)[Power/Battery] [use_chip_trim_value] 3462 -> 3444
<5>[ 570.308541] (0)[Power/Battery] [use_chip_trim_value] -53 -> -52
<7>[ 570.308596] (0)[2306:init] set proc[2306] name: ->[logwrapper]
<7>[ 570.308880] (0)[2307:WifiStateMachin] set proc[2307] name: ->[WifiMonitor]
<7>[ 570.314535] (0)[2306:logwrapper] fork [2308:logwrapper]
<5>[ 570.315058] (0)[Power/Battery] [FGADC] 0,3444,0,-52,3881,60,61,63,1965,1984,61,0,0,1000,0,3796,1000,37,39,3462,100,103
<0>[ 570.315267] (0)[MUSB]mt_usb_disconnect 290: [MUSB] USB is ready for disconnect
<7>[ 570.315384] (0)[2308:logwrapper] set proc[2308] name: ->[wpa_supplicant]
<5>[ 570.323277] (0)[Power/Battery] [use_chip_trim_value] 3798 -> 3779
<5>[ 570.323297] (0)[Power/Battery] [tbat_workaround] 89,105,0,377,43
<5>[ 570.368022] (0)[Power/Battery] [BATTERY:AVG] BatTemp:23 Vbat:3804 VBatSen:3792 SOC:61 ChrDet:0 Vchrin:77 Icharging:10 ChrType:0 USBstate:1 gADC_I_SENSE_offset:4
<4>[ 570.368109] (0)[TestMode] Disable Safty Timer : no UI display
<5>[ 570.449808] (0)[wlan] N=0 closed
<5>[ 570.449832] (0)[wlan] EVENT-ROAMING ABORT: Current Time = 270430
<5>[ 570.449844] (0)[wlan] [13] TRANSITION: [0] -> [0]
<6>[ 570.451883] (0)[wlan] NAF=0,0,0
<6>[ 570.452026] (0)[wlan] NAF=0,0,0
<5>[ 570.577710] (0)[wlan] [13] TRANSITION: [0] -> [2]
<7>[ 570.670581] (0)[2288:com.specdevice] exit
<5>[ 570.701782] (0)[wlan] CMD set_band=0
<7>[ 570.723034] (0)[2294:AsyncTask #2] fork [2309:AsyncTask #2]
<7>[ 570.729017] (0)[2309:AsyncTask #2] set proc[2309] name: ->[dmesg]
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IMM76D
ro.build.display.id=ALPS.ICS2.MP.V1.20
ro.build.version.incremental=eng.root.1376116669
ro.custom.build.version=1376116669
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.2.2
ro.build.date=Sat Aug 10 14:39:31 CST 2013
ro.build.date.utc=1376116771
ro.build.type=user
ro.build.user=root
ro.build.host=xuzhen
ro.build.tags=test-keys
ro.product.model=Galaxy-S4
ro.product.brand=samsung
ro.product.name=Galaxy-S4
ro.product.device=GT-I9505
ro.product.board=Galaxy-S4
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Galaxy-S4
ro.product.locale.language=zh
ro.product.locale.region=CN
ro.wifi.channels=
ro.board.platform=SMDK4x12
# ro.build.product is obsolete; use ro.product.device
ro.build.product=GT-I9505
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=mobitek75_ics2-user 4.0.4 IMM76D eng.root.1376116669 test-keys
ro.build.fingerprint=alps/mobitek75_ics2/mobitek75_ics2:4.0.4/IMM76D/1376116669:user/test-keys
ro.build.flavor=
ro.build.characteristics=default
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=ALPS.ICS2.MP.V1.20
ro.mediatek.platform=MT6575
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.ICS2.MP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=128m
# Encrypt phone function
ro.crypto.tmpfs_options=mode=0771,uid=1000,gid=1000
ro.crypto.fs_type=ext4
ro.crypto.fs_real_blkdev=/emmc@usrdata
ro.crypto.fs_mnt_point=/data
ro.crypto.fs_options=noauto_da_alloc
ro.crypto.fs_flags=0x00000406
ro.boot_animation_switch_code=*#0066#
# audio
ro.camera.sound.forced=0
ro.audio.silent=0
# USB Config Type
ro.sys.usb.storage.type=mtp,mass_storage
# USB MTP WHQL
ro.sys.usb.mtp.whql.enable=0
# Power off opt in IPO
sys.ipo.pwrdncap=2
ro.sys.usb.storage.type=mtp,mass_storage
#
# ADDITIONAL_BUILD_PROPERTIES
#
fmradio.driver.chip=3
ril.external.md=1
ro.sf.hwrotation=0
ril.current.share_modem=2
launcherplus.allappsgrid=2d
launcher2.allappsgrid=3d_20
curlockscreen=2
ro.mediatek.gemini_support=true
drm.service.enabled=true
fmradio.driver.enable=1
mediatek.wlan.chip=MT6628
mediatek.wlan.module.postfix=_mt6628
dalvik.vm.mtk-stack-trace-file=/data/anr/mtk_traces.txt
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.config.ringtone=Backroad.ogg
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
wlan_mt6628 277354 0 - Live 0xbf1f8000 (P)
cfg80211 121596 0 - Live 0xbf1d0000
mtk_fm_priv 2847 0 - Live 0xbf1cc000 (P)
mtk_fm_drv 112777 1 mtk_fm_priv, Live 0xbf1a8000
mtk_stp_bt 39942 1 - Live 0xbf19b000
mtk_stp_gps 37190 0 - Live 0xbf18e000
mtk_stp_uart 21577 1 - Live 0xbf185000 (P)
mtk_stp_wmt 372950 8 wlan_mt6628,mtk_fm_priv,mtk_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf11b000 (P)
mtk_hif_sdio 18186 2 wlan_mt6628,mtk_stp_wmt, Live 0xbf112000
devinfo 756 0 - Live 0xbf10e000 (P)
sec 109587 0 - Live 0xbf0ed000 (P)
vcodec_kernel_driver 23633 0 - Live 0xbf0e2000 (P)
mt6575_m4u 111760 4 - Live 0xbf0bd000 (P)
ccmni 17310 0 - Live 0xbf0b4000 (P)
ccci 117880 15 ccmni, Live 0xbf08c000 (P)
ccci_plat 127160 3 sec,ccmni,ccci, Live 0xbf063000 (P)
mtk_drvb 5115 0 - Live 0xbf05e000 (P)
mtklfb 23598 0 - Live 0xbf054000
pvrsrvkm 232891 85 mtklfb, Live 0xbf00d000
alps_core 2221 0 - Live 0xbf009000 (P)
aed 16096 3 - Live 0xbf000000 (P)
RAM: 512 MB (496 MB available)
System RAM: 496.000MB
mtkfb.0: 6.000MB
Flash: 4 GB (3.600 GB actual)
mmcblk0: 3.600 GB
Pantalla táctil para GT-I9500 S4
$1.99 For Samsung Galaxy S3 i9300 i9308 S4 GT-i9500 S5 G900F Front Touch screen Panel LCD Out Glass Cover Lens Replacement
$21.57 AAA Quality S4 LCD For Samsung S4 LCD Display Touch Screen With Frame Assembly For S4 GT-GT-i905 i9500 i9506 LCD Repair
$14 5.0" Super AMOLED S4 LCD For Samsung S4 GT-i9505 i9500 i9505 i545 i337 LCD Display Touch Screen Digitizer Replacement
$21.57 NEW 5.0''S4 LCD For Samsung S4 LCD Display Touch Screen With Frame Assembly For S4 GT-GT-i905 i9500 i9506 LCD Repair
$11.8 10Pcs\lot For Samsung Galaxy S3 i9300 i9308 S4 GT-i9500 S5 G900F Front Touch screen Panel LCD Out Glass Cover Lens Replacement
$22.99 For Samsung Galaxy S4 gt- i9500 i9505 i337 Touch Screen Digitizer Glass Sensor + LCD Display Panel Monitor Assembly + Frame
$335.64 for Lcd assembly Touch Screen Digitize screen for samsung Galaxy S4 GT-i9500 GT-i9505 i337 i545 lcd with frame
$15.79 For SAMSUNG Galaxy S4 LCD Display With Frame GT-i9500 GT-i9505 i337 LCD Touch Screen Digitizer Assembly
$35.6 for SAMSUNG Galaxy S4 LCD Display Touch Screen Digitizer GT-i9505 i9500 i9505 i9506 i9515 i337 Replacement Repair Spare Parts
Batería de repuesto para GT-I9500 S4
$51.71 Brand New B600BC B600BE B600BK B600BU 2600mAh Battery For Samsung Galaxy S4 I9500 I9502 i9295 GT-I9505 I9508 i337 NO NFC
$63.36 2600mAh Battery For Samsung GALAXY S 4 S4 I9500 I9502 i9295 GT-I9505 I9508 I959 i337 B600BC B600BE B600BK B600BU
$56.74 2600Mah Battery For Samsung GALAXY S 4 S4 I9500 I9502 I9295 GT-I9505 I9508 I959 I337 B600BC B600BE B600BK B600BU
$51.91 Brand New B600BC B600BE B600BK B600BU 2600mAh Battery For Samsung Galaxy S4 I9500 I9502 i9295 GT-I9505 I9508 i337 NO NFC
$66.32 2600mAh Battery For Samsung GALAXY S 4 S4 I9500 I9502 i9295 GT-I9505 I9508 I959 i337 B600BC B600BE B600BK B600BU
$56.77 EB425161LU Battery for Samsung Galaxy S S2 S3 S4 S5 Mini I8190 I9500 I9300 I9100 I9190 I9000 S GT-I9070 I9 S3mini S4mini code
$6 NEW Replacement Battery B600BC B600BE For Samsung GALAXY S4 I9500 I9502 I9508 I959 GT-I9505 B600BU Phone Battery
$63.36 B600BC B600BE B600BK B600BU 2600mAh Battery For Samsung GALAXY S4 I9500 I9502 I9295 GT-I9505 I9508 I959 I337 Batterij
$54 Brand New B600BC B600BE B600BK B600BU 2600mAh Battery For Samsung GALAXY S4 I9500 I9502 i9295 GT-I9505 I9508 I959 i337 NFC
$5.99 B600BC B600BE 2600mAh New Replacement Battery For Samsung GALAXY S4 I9500 I9502 I9508 I959 GT-I9505 B600BU Phone Battery
$5.9 High Quality 2600mAh B600BC B600BE Battery For Samsung GALAXY S4 I9500 I9502 GT-I9505 I9508 I959 Cellphone
$8.5 Orginal XDOU Replacement Battery For Samsung Galaxy S4 I9500 I959 I9502 I9508 GT-I9505 Genuine B600BC B600BE B600BU 2600mAh NFC
$63.75 Mobile Phone Batteries B600BC B600BE B600BK For Samsung GALAXY S4 I9500 I9502 i9295 GT-I9505 I9508 I959 i337 i545 i959 2600mAh
$67.66 EB425161LU Battery for Samsung Galaxy S S2 S3 S4 S5 Mini I8190 I9500 I9300 I9100 I9190 I9000 S GT-I9070 I9 S3mini S4mini code
$50.4 Brand New B600BC B600BE B600BK B600BU 2600mAh Battery For Samsung Galaxy S4 I9500 I9502 i9295 GT-I9505 I9508 i337 NO NFC
$55 2600mAh Battery for Samsung GALAXY S 4 S4 I9500 I9502 I9295 GT-I9505 I9508 I959 I337 B600BC B600BE B600BK B600BU Batteries
$49.84 Brand New B600BC B600BE B600BK B600BU 2600mAh Battery For Samsung Galaxy S4 I9500 I9502 i9295 GT-I9505 I9508 i337 NO NFC
$53.4 Brand New B600BC B600BE B600BK B600BU 2600mAh Battery For Samsung GALAXY S4 I9500 I9502 i9295 GT-I9505 I9508 I959 i337 NFC
$53.4 Brand New B600BC B600BE B600BK B600BU 2600mAh Battery For Samsung GALAXY S4 I9500 I9502 i9295 GT-I9505 I9508 I959 i337 NFC
$6.31 Replacement Battery For Samsung Galaxy S4 I9500 I959 I9502 I9508 GT-I9505 Rechargeable B600BC B600BE B600BU 2600mAh
Fundas para GT-I9500 S4
$0.84 Silicone Case For Samsung S4 Case Samsung Galaxy S4 S 4 GT I9500 I9505 GT-I9500 GT-I9505 i9515 I9506 I9507 I9502 S4 Cases
$2.98 Smart View Flip Cover Leather Phone Case For Samsung Galaxy S4 GalaxyS4 S 4 IV SIV GT 9500 I9500 I9505 I9506 GT-I9500 GT-I9505
$4.04 Luxury Wallet Leather Case For Samsung Galaxy S4 Mini S4 GT I9190 I9192 I9195 I9500 GT-I9190 Flip Case Phone Back Cover Coque
$2.98 Smart View Flip Cover Leather Phone Case For Samsung Galaxy S4 Mini S4 S 4 S4mini GT I9190 I9192 I9195 I9500 GT-I9190 GT-I9192
$2.98 Flip Cover Leather Wallet Phone Case For Samsung Galaxy S3 S4 Mini S 3 4 S4mini GT I9300 I9301 I9305 I9190 I9192 I9195 I9500
$3.79 Case for Samsung Galaxy S4 IV GT-I9500 i9505 Cover Silicone Soft TPU Protective Phone Cases Coque
$3.37 PU Leather Flip Case for Samsung Galaxy S4 S4 i9500 i9502 Duos i9505 i9506 Cover Case for GalaxyS4 GT-i9500 GT-i9505 GT-i9502
$3.99 Phone case for Samsung Galaxy S4 S 4 GT I9500 I9505 I9506 I9505G GT-I9500 GT-I9505 GT-I9502 GT-I9506 Flip Phone Leather Cover
$0.84 Silicone Case For Samsung S4 Case Samsung Galaxy S4 S 4 GT I9500 I9505 GT-I9500 GT-I9505 i9515 I9506 I9507 I9502 I9508 S4 Cases
$3.19 Flip Case For Samsung Galaxy S4 S 4 GalaxyS4 I9500 I9505 I9506 Leather Cover Phone Case GT-I9500 GT-I9505 GT-I9506 GT-I9515 Bags
$3.37 Flip Case for Samsung Galaxy S4 S 4 GalaxyS4 I9500 I9505 I9506 Leather Cover Phone Case GT-I9500 GT-I9505 GT-I9506 GT-I9515 bags
$1.96 Silicone Case For Samsung Galaxy S4 I9500 I9505 GT Cases Cute TPU Cover Phone Case For Samsung S4 Mini Back Cover Fundas Bags
$3.3 Case for Samsung Galaxy S4 IV GT-I9500 i9505 Cover Silicone Soft TPU Protective Phone Cases Coque
$2.87 Lovely Cartoon Phone Cases For Samsung Galaxy S4 I9500 I9505 GT-I9500 S4 Mini i9190 S4 Active i9295 Animal Cat Pattern Cover
$3.53 Tempered glass For Samsung Galaxy S2 plus S3 S4 S5 S6 S3 mini S4 mini S5 mini GT I9190 i8190 i9500 I9300 I9100 SM G9200 case
$5.8 Genuine luxury leather case For Samsung Galaxy S4 i9500 i9505 GT-I9500 10 Colors Available + Free Screen Protector
Find Similar devices | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |