1. Install SpecDevice
2. Run and decode your specs
3. Get your link (read more...)
General Specifications | |
---|---|
Manufacturer | alps |
Model | Cloud Z5 |
Firmware | 4.0.4; eng.pengfajun.1375500876; SDK15 |
CPU | 2 cores; ARMv7 Processor rev 0 (v7l); Max: 1001.0 MHz; Min: 250.2 MHz |
Display | 800 x 480; DPI: 240; Evaluated Size: 3.9" |
Touch screen | NOT multitouch 1 point |
GPU | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.8@905891 |
RAM | 512 MB (496 MB available) |
Flash | 8 GB (7.321 GB actual); 0.5 GB (0.471 GB actual) (see memory map tab) |
Communications | |
Phone | GSM, Dual SIM; Net: GPRS |
WiFi | wlan_mt6628; IEEE 802.11 b/g/n; MediaTek MT6628; AP Mode |
USB Host | No |
Bluetooth | Bluetooth 3.0+HS, 4.0 |
GPS | No |
Advanced Features | |
Front camera | Photo: 8.0 MP; Max: 3264x2448; Focus: auto continuous-picture continuous-video macro infinity manual fullscan; Flash modes: auto on off torch |
Back camera | Photo: 1.2 MP; Max size: 1280x960; Focus: infinity; No flash |
Sensors | mma8452q 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0.004 (0.012%); power: 0.13mA; |
ap3216c Proximity Sensor (Capella); range: 0...1; resolution: 1 (100%); power: 0.13mA; | |
ap3216c Light Sensor (Capella); range: 0...10240; resolution: 1 (0.01%); power: 0.13mA; | |
Vibrator | Yes |
Supported languages | 44; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Burmese; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
Battery | Technology: Li-ion; Voltage: 4059 |
FM radio | Supported by chipset |
Owner's comment: | cloud Z5 |
SD Version: | 1.1 5 |
KERNEL: Linux version 3.0.13 (pengfajun@fwq-System-Product-Name) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Sat Aug 3 11:34:22 CST 2013
CODENAME: REL
Mainboard: a28
BRAND: Cloud Z5
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: a28
DISPLAY: ALPS.ICS2.MP.V1.18
FINGERPRINT: alps/a28/a28:4.0.4/IMM76D/1375500876:user/test-keys
HARDWARE: mt6577
ID: IMM76D
TAGS: test-keys
Processor : ARMv7 Processor rev 0 (v7l)
processor : 0
BogoMIPS : 1993.93
processor : 1
BogoMIPS : 2000.48
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc09
CPU revision : 0
Hardware : MT6517
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<6>[28674.149083] (0)[Gsensor] TL---fwq sensor operate get data
<6>[28674.150017] (0)[Gsensor] TCBF--gsensor data--acc[MMA8452Q_AXIS_X]=-804, acc[MMA8452Q_AXIS_Y]=6091, acc[MMA8452Q_AXIS_Z]=7278
<6>[28674.150995] (0)[ALS/PS] ALS: 00000 => 00010
<7>[28674.189610] (0)[16622:dmesg] exit
<7>[28674.189855] (0)[16622:dmesg] sig 17 to [16616:AsyncTask #2]
<6>[28674.209106] (0)[Gsensor] TL---fwq sensor operate get data
<6>[28674.210028] (0)[Gsensor] TCBF--gsensor data--acc[MMA8452Q_AXIS_X]=-804, acc[MMA8452Q_AXIS_Y]=6129, acc[MMA8452Q_AXIS_Z]=7393
<6>[28674.210996] (0)[ALS/PS] ALS: 00000 => 00010
<7>[28674.223414] (1)[16605:Thread-824] exit
<7>[28674.251162] (1)[16612:Thread-827] exit
<6>[28674.269088] (0)[Gsensor] TL---fwq sensor operate get data
<6>[28674.271927] (0)[Gsensor] TCBF--gsensor data--acc[MMA8452Q_AXIS_X]=-842, acc[MMA8452Q_AXIS_Y]=6091, acc[MMA8452Q_AXIS_Z]=7431
<7>[28674.273129] (1)[299:WifiStateMachin] fork [16623:WifiStateMachin]
<7>[28674.273190] (1)[16623:WifiStateMachin] set proc[16623] name: ->[loadDriverThrea]
<6>[28674.274974] (0)[ALS/PS] ALS: 00000 => 00010
<6>[28674.284316] (1)[WLAN] rfkill_set_block(blocked 0)
<6>[28674.284329] (1)[WLAN] Power on
<3>[28674.284344] (1)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[28674.284366] (1)[STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[28674.284417] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[28674.284430] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(GPIO124)
<3>[28674.284441] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO122)
<3>[28674.284451] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(not defined)
<3>[28674.284461] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[28674.284471] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO15)
<3>[28674.284481] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(18)
<3>[28674.284492] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO17)
<3>[28674.284502] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(17)
<3>[28674.284512] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<3>[28674.284522] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[28674.284532] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[28674.284542] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[28674.284552] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[28674.284562] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[28674.284572] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:FM digital mode is not set, no need for I2S GPIOs
<3>[28674.284584] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(GPIO118)
<3>[28674.284604] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(GPIO112)
<3>[28674.284616] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[28674.284629] (1)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<3>[28674.284642] (1)[WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:ALL EINT not defined
<3>[28674.284664] (1)[WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<7>[28674.296358] (0)[252:er.ServerThread] fork [16624:er.ServerThread]
<7>[28674.297826] (1)[16624:er.ServerThread] set proc[16624] name: ->[Thread-1571]
<7>[28674.299007] (1)[16624:Thread-1571] exit
<6>[28674.329278] (0)[Gsensor] TL---fwq sensor operate get data
<6>[28674.330192] (0)[Gsensor] TCBF--gsensor data--acc[MMA8452Q_AXIS_X]=-804, acc[MMA8452Q_AXIS_Y]=6052, acc[MMA8452Q_AXIS_Z]=7623
<6>[28674.331110] (0)[ALS/PS] ALS: 00000 => 00010
<7>[28674.345521] (0)[15853:Smack Packet Wr] exit
<6>[28674.389155] (0)[Gsensor] TL---fwq sensor operate get data
<6>[28674.390154] (0)[Gsensor] TCBF--gsensor data--acc[MMA8452Q_AXIS_X]=-727, acc[MMA8452Q_AXIS_Y]=6091, acc[MMA8452Q_AXIS_Z]=7048
<6>[28674.391291] (0)[ALS/PS] ALS: 00000 => 00010
<6>[28674.449230] (0)[Gsensor] TL---fwq sensor operate get data
<6>[28674.450230] (0)[Gsensor] TCBF--gsensor data--acc[MMA8452Q_AXIS_X]=-881, acc[MMA8452Q_AXIS_Y]=6014, acc[MMA8452Q_AXIS_Z]=7700
<6>[28674.451369] (0)[ALS/PS] ALS: 00000 => 00010
<3>[28674.489137] (1)[WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[28674.489202] (1)[WMT-PLAT][I]wmt_plat_i2s_ctrl:[MT662x]warnning:FM digital mode is not set, no I2S GPIO settings should be modified by combo driver
<3>[28674.489258] (1)[WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<3>[28674.489487] (1)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[28674.489533] (1)[WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[28674.489576] (1)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<4>[28674.490099] (1)mtk_get_bus_freq() return 192400
<3>[28674.490536] (1)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[28674.490579] (1)Flush type = 4 Rx Queue
<3>[28674.491027] (1)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[28674.491081] (1)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[28674.491125] (1)[STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[28674.491160] (1)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[28674.491200] (1)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<6>[28674.491251] (1)[STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[28674.491290] (1)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[28674.491331] (1)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[28674.491375] (1)[STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[28674.497150] (0)[WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6628)
<3>[28674.502911] (0)[WMT-IC][I]mt6628_ver_check:MT6628: read hw_ver (hw version) (0x8b10)
<3>[28674.509228] (0)[WMT-IC][I]mt6628_ver_check:MT6628: read fw_ver (rom version) (0x8b10)
<3>[28674.509289] (0)[WMT-IC][I]mt6628_find_wmt_ic_info:found ic info(0x8b10) by full match! index:2
<3>[28674.509346] (0)[WMT-IC][I]mt6628_ver_check:MT6628: wmt ic info: MT6628.E3 (0x8b10, WMTHWVER:2, patch_ext:_e2)
<3>[28674.509399] (0)[WMT-CORE][I]wmt_core_hw_check:chip id(0x6628) ver_check ok
<6>[28674.509652] (0)[Gsensor] TL---fwq sensor operate get data
<6>[28674.510679] (0)[Gsensor] TCBF--gsensor data--acc[MMA8452Q_AXIS_X]=-919, acc[MMA8452Q_AXIS_Y]=6129, acc[MMA8452Q_AXIS_Z]=7661
<6>[28674.511913] (0)[ALS/PS] ALS: 00000 => 00010
<3>[28674.521262] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[28674.521316] (0)[WMT-IC][I]mt6628_sw_init:WMT-CORE: change baudrate(4000000) ok
<3>[28674.532358] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(srh_patch) result(0)
<3>[28674.532412] (0)[WMT-IC][I]mt6628_patch_dwn:valid patch found: (/system/etc/firmware//mt6628_patch_e2_hdr.bin)
<3>[28674.533403] (0)[WMT-IC][I]mt6628_patch_dwn:===========================================
<3>[28674.533456] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Built Time = 20120903180713a
<3>[28674.533501] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[28674.533542] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[28674.533582] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Ph Ver = 0x0010
<3>[28674.533623] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Platform = 1226
<3>[28674.533662] (0)[WMT-IC][I]mt6628_patch_dwn:===========================================
<3>[28674.548255] (1)[WMT-CTRL][W]wmt_ctrl_rx:wmt_ctrl_rx be signaled, but no rx data(200)
<6>[28674.570867] (0)[Gsensor] TL---fwq sensor operate get data
<6>[28674.571998] (0)[Gsensor] TCBF--gsensor data--acc[MMA8452Q_AXIS_X]=-689, acc[MMA8452Q_AXIS_Y]=6129, acc[MMA8452Q_AXIS_Z]=6550
<6>[28674.579445] (0)[ALS/PS] ALS: 00000 => 00010
<6>[28674.639089] (0)[Gsensor] TL---fwq sensor operate get data
<6>[28674.640632] (0)[Gsensor] TCBF--gsensor data--acc[MMA8452Q_AXIS_X]=-689, acc[MMA8452Q_AXIS_Y]=6014, acc[MMA8452Q_AXIS_Z]=7202
<6>[28674.641648] (0)[ALS/PS] ALS: 00000 => 00010
<3>[28674.651261] (0)[WMT-IC][I]mt6628_patch_dwn:wmt_core: patch dwn:0 frag(21, 832) ok
<3>[28674.651982] (0)[WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf147458)
<3>[28674.652983] (0)[WMT-IC][I]mt6628_sw_init:init_coex ok
<6>[28674.653836] (0)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[28674.653850] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[28674.653863] (0)[STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[28674.653874] (0)[WMT-IC][I]mt6628_sw_init:enable host STP-UART-FULL mode
<3>[28674.670939] (0)[WMT-IC][I]mt6628_sw_init:co-clock disabled.
<3>[28674.672018] (0)[WMT-IC][I]mt6628_sw_init:set fm mode (2) ok
<3>[28674.672030] (0)[WMT-IC][I]mt6628_sw_init:disable mt662x firmware coredump
<6>[28674.672042] (0)[STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[28674.672054] (0)[STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[28674.672066] (0)mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[28674.672075] (0)board_sdio_ctrl force off before on
<6>[28674.672083] (0)mtk_wcn_cmb_sdio_off (3)
<6>[28674.672319] (0)mtk_wcn_cmb_sdio_on (3)
<3>[28674.672467] (0)msdc3 -> USR Resume <- msdc_pm() : L<1737> PID
<3>[28674.689327] (0)msdc3 -> ================ <- msdc_set_mclk() : L<986> PID
<3>[28674.689399] (0)msdc3 -> !!! Set<400KHz> Source<197000KHz> -> sclk<397KHz> DDR<0> mode<0> div<124> <- msdc_set_mclk() : L<988> PID
<3>[28674.689458] (0)msdc3 -> ================ <- msdc_set_mclk() : L<989> PID
<6>[28674.699185] (0)[Gsensor] TL---fwq sensor operate get data
<6>[28674.700175] (0)[Gsensor] TCBF--gsensor data--acc[MMA8452Q_AXIS_X]=-957, acc[MMA8452Q_AXIS_Y]=6129, acc[MMA8452Q_AXIS_Z]=7546
<6>[28674.701306] (0)[ALS/PS] ALS: 00000 => 00010
<3>[28674.717180] (0)msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1807> PID
<3>[28674.732119] (0)msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<4158> PID
<3>[28674.732202] (0)msdc3 -> ================ <- msdc_set_mclk() : L<986> PID
<3>[28674.732268] (0)msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<988> PID
<3>[28674.732329] (0)msdc3 -> ================ <- msdc_set_mclk() : L<989> PID
<6>[28674.734643] (0)mmc1: new high speed SDIO card at address 0001
<6>[28674.739824] (0)[WMT-DFT][I]hif_sdio_probe:start!
<6>[28674.739869] (0)[WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x6628) num(0x1)
<6>[28674.739909] (0)[WMT-DFT][I]hif_sdio_probe:card->info[0]: 6628
<6>[28674.739943] (0)[WMT-DFT][I]hif_sdio_probe:card->info[1]: Combo
<6>[28674.739976] (0)[WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[28674.740008] (0)[WMT-DFT][I]hif_sdio_probe:card->info[3]:
<6>[28674.740289] (0)[WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(524288)
<7>[28674.740395] (0)WQ_WARN: cpu:4, proc:kworker/u:2, [mmc_rescan+0x0/0x324]dur: 67014770 > 15ms
<6>[28674.759587] (0)[Gsensor] TL---fwq sensor operate get data
<6>[28674.760610] (0)[Gsensor] TCBF--gsensor data--acc[MMA8452Q_AXIS_X]=-1110, acc[MMA8452Q_AXIS_Y]=6205, acc[MMA8452Q_AXIS_Z]=7700
<7>[28674.762737] (0)WQ_WARN: cpu:0, proc:kworker/0:1, [thermal_zone_device_check+0x0/0x18]dur: 313519384 > 15ms
<6>[28674.763385] (0)[ALS/PS] ALS: 00000 => 00010
<6>[28674.819870] (0)[Gsensor] TL---fwq sensor operate get data
<6>[28674.820909] (0)[Gsensor] TCBF--gsensor data--acc[MMA8452Q_AXIS_X]=-1110, acc[MMA8452Q_AXIS_Y]=6205, acc[MMA8452Q_AXIS_Z]=7125
<6>[28674.822049] (0)[ALS/PS] ALS: 00000 => 00010
<6>[28674.829119] (0)[WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[28674.829470] (1)[2:kthreadd] fork [16625:kthreadd]
<6>[28674.829530] (0)[WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<4>[28674.833143] (0)[RT_MONITOR]WARNNING [16625:ksdioirqd/mmc1] SET NOT ALLOW RT Prio [1] for proc [16625:ksdioirqd/mmc1]
<5>[28674.849815] (0)init: set prop[persist.sys.bootpackage:1], fsync fs Start
<5>[28674.850955] (0)init: set prop[persist.sys.bootpackage:1], fsync fs End
<6>[28674.879725] (0)[Gsensor] TL---fwq sensor operate get data
<6>[28674.882152] (0)[Gsensor] TCBF--gsensor data--acc[MMA8452Q_AXIS_X]=-804, acc[MMA8452Q_AXIS_Y]=6091, acc[MMA8452Q_AXIS_Z]=7202
<6>[28674.883294] (0)[ALS/PS] ALS: 00000 => 00010
<6>[28674.939041] (0)[Gsensor] TL---fwq sensor operate get data
<6>[28674.939942] (0)[Gsensor] TCBF--gsensor data--acc[MMA8452Q_AXIS_X]=-1072, acc[MMA8452Q_AXIS_Y]=6205, acc[MMA8452Q_AXIS_Z]=7278
<6>[28674.940854] (0)[ALS/PS] ALS: 00000 => 00010
<6>[28674.999120] (0)[Gsensor] TL---fwq sensor operate get data
<6>[28675.000016] (0)[Gsensor] TCBF--gsensor data--acc[MMA8452Q_AXIS_X]=-957, acc[MMA8452Q_AXIS_Y]=6167, acc[MMA8452Q_AXIS_Z]=7470
<6>[28675.000935] (0)[ALS/PS] ALS: 00000 => 00010
<6>[28675.059055] (0)[Gsensor] TL---fwq sensor operate get data
<6>[28675.059955] (0)[Gsensor] TCBF--gsensor data--acc[MMA8452Q_AXIS_X]=-1149, acc[MMA8452Q_AXIS_Y]=6129, acc[MMA8452Q_AXIS_Z]=7355
<6>[28675.060866] (0)[ALS/PS] ALS: 00000 => 00010
<6>[28675.119106] (0)[Gsensor] TL---fwq sensor operate get data
<6>[28675.120075] (0)[Gsensor] TCBF--gsensor data--acc[MMA8452Q_AXIS_X]=-919, acc[MMA8452Q_AXIS_Y]=6205, acc[MMA8452Q_AXIS_Z]=7316
<6>[28675.121154] (0)[ALS/PS] ALS: 00000 => 00010
<6>[28675.179250] (0)[Gsensor] TL---fwq sensor operate get data
<6>[28675.180162] (0)[Gsensor] TCBF--gsensor data--acc[MMA8452Q_AXIS_X]=-957, acc[MMA8452Q_AXIS_Y]=6244, acc[MMA8452Q_AXIS_Z]=7048
<6>[28675.181079] (0)[ALS/PS] ALS: 00000 => 00010
<6>[28675.239048] (0)[Gsensor] TL---fwq sensor operate get data
<6>[28675.239949] (0)[Gsensor] TCBF--gsensor data--acc[MMA8452Q_AXIS_X]=-996, acc[MMA8452Q_AXIS_Y]=6167, acc[MMA8452Q_AXIS_Z]=7355
<6>[28675.240858] (0)[ALS/PS] ALS: 00000 => 00010
<6>[28675.299059] (0)[Gsensor] TL---fwq sensor operate get data
<6>[28675.299958] (0)[Gsensor] TCBF--gsensor data--acc[MMA8452Q_AXIS_X]=-842, acc[MMA8452Q_AXIS_Y]=6014, acc[MMA8452Q_AXIS_Z]=7431
<6>[28675.300881] (0)[ALS/PS] ALS: 00000 => 00010
<6>[28675.359070] (0)[Gsensor] TL---fwq sensor operate get data
<6>[28675.359980] (0)[Gsensor] TCBF--gsensor data--acc[MMA8452Q_AXIS_X]=-727, acc[MMA8452Q_AXIS_Y]=6052, acc[MMA8452Q_AXIS_Z]=7278
<6>[28675.360899] (0)[ALS/PS] ALS: 00000 => 00010
<6>[28675.419039] (0)[Gsensor] TL---fwq sensor operate get data
<6>[28675.419948] (0)[Gsensor] TCBF--gsensor data--acc[MMA8452Q_AXIS_X]=-804, acc[MMA8452Q_AXIS_Y]=5937, acc[MMA8452Q_AXIS_Z]=8006
<6>[28675.420863] (0)[ALS/PS] ALS: 00000 => 00010
<6>[28675.479048] (0)[Gsensor] TL---fwq sensor operate get data
<6>[28675.479954] (0)[Gsensor] TCBF--gsensor data--acc[MMA8452Q_AXIS_X]=-842, acc[MMA8452Q_AXIS_Y]=6052, acc[MMA8452Q_AXIS_Z]=7431
<6>[28675.480868] (0)[ALS/PS] ALS: 00000 => 00010
<6>[28675.539048] (0)[Gsensor] TL---fwq sensor operate get data
<6>[28675.539952] (0)[Gsensor] TCBF--gsensor data--acc[MMA8452Q_AXIS_X]=-996, acc[MMA8452Q_AXIS_Y]=6014, acc[MMA8452Q_AXIS_Z]=7585
<6>[28675.540867] (0)[ALS/PS] ALS: 00000 => 00010
<6>[28675.599060] (0)[Gsensor] TL---fwq sensor operate get data
<6>[28675.599960] (0)[Gsensor] TCBF--gsensor data--acc[MMA8452Q_AXIS_X]=-881, acc[MMA8452Q_AXIS_Y]=5937, acc[MMA8452Q_AXIS_Z]=7431
<6>[28675.600878] (0)[ALS/PS] ALS: 00000 => 00010
<6>[28675.659085] (0)[Gsensor] TL---fwq sensor operate get data
<6>[28675.660039] (0)[Gsensor] TCBF--gsensor data--acc[MMA8452Q_AXIS_X]=-804, acc[MMA8452Q_AXIS_Y]=6014, acc[MMA8452Q_AXIS_Z]=7355
<6>[28675.661020] (0)[ALS/PS] ALS: 00000 => 00010
<6>[28675.719109] (0)[Gsensor] TL---fwq sensor operate get data
<6>[28675.720098] (0)[Gsensor] TCBF--gsensor data--acc[MMA8452Q_AXIS_X]=-957, acc[MMA8452Q_AXIS_Y]=6091, acc[MMA8452Q_AXIS_Z]=7470
<6>[28675.721228] (0)[ALS/PS] ALS: 00000 => 00010
<7>[28675.726695] (0)[2:kthreadd] fork [16626:kthreadd]
<6>[28675.779057] (0)[Gsensor] TL---fwq sensor operate get data
<6>[28675.779961] (0)[Gsensor] TCBF--gsensor data--acc[MMA8452Q_AXIS_X]=-1072, acc[MMA8452Q_AXIS_Y]=6129, acc[MMA8452Q_AXIS_Z]=7431
<6>[28675.780876] (0)[ALS/PS] ALS: 00000 => 00010
<6>[28675.825311] (0)[WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(6628) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[28675.825364] (0)[WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[28675.825424] (0)[WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 coredump:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[28675.825572] (1)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<3>[28675.825665] (1)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<4>[28675.825697] (0)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<7>[28675.828836] (1)[16623:loadDriverThrea] exit
<6>[28675.839404] (0)[Gsensor] TL---fwq sensor operate get data
<6>[28675.841748] (0)[Gsensor] TCBF--gsensor data--acc[MMA8452Q_AXIS_X]=-727, acc[MMA8452Q_AXIS_Y]=6129, acc[MMA8452Q_AXIS_Z]=7163
<6>[28675.843048] (0)[ALS/PS] ALS: 00000 => 00010
<6>[28675.854969] (0)[RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[28675.855049] (0)ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[28675.869476] (0)WQ_WARN: cpu:0, proc:kworker/0:1, [wlanSetMulticastListWorkQueue+0x0/0x1f4 [wlan_mt6628]]dur: 15216692 > 15ms
<5>[28675.870634] (0)init: starting `wpa_supplicant`
<7>[28675.871979] (1)[1:init] fork [16627:init]
<7>[28675.873737] (0)[16627:init] set proc[16627] name: ->[logwrapper]
<7>[28675.876076] (0)[16627:logwrapper] fork [16628:logwrapper]
<7>[28675.877283] (0)[16628:logwrapper] set proc[16628] name: ->[wpa_supplicant]
<6>[28675.899068] (0)[Gsensor] TL---fwq sensor operate get data
<6>[28675.899967] (0)[Gsensor] TCBF--gsensor data--acc[MMA8452Q_AXIS_X]=-957, acc[MMA8452Q_AXIS_Y]=6091, acc[MMA8452Q_AXIS_Z]=7585
<6>[28675.900878] (0)[ALS/PS] ALS: 00000 => 00010
<6>[28675.959042] (0)[Gsensor] TL---fwq sensor operate get data
<6>[28675.960025] (0)[Gsensor] TCBF--gsensor data--acc[MMA8452Q_AXIS_X]=-919, acc[MMA8452Q_AXIS_Y]=6091, acc[MMA8452Q_AXIS_Z]=7508
<6>[28675.960971] (0)[ALS/PS] ALS: 00000 => 00010
<7>[28675.972490] (1)[299:WifiStateMachin] fork [16629:WifiStateMachin]
<7>[28675.972544] (0)[16629:WifiStateMachin] set proc[16629] name: ->[WifiMonitor]
<6>[28676.019162] (0)[Gsensor] TL---fwq sensor operate get data
<6>[28676.020154] (0)[Gsensor] TCBF--gsensor data--acc[MMA8452Q_AXIS_X]=-842, acc[MMA8452Q_AXIS_Y]=5976, acc[MMA8452Q_AXIS_Z]=7585
<6>[28676.021286] (0)[ALS/PS] ALS: 00000 => 00010
<7>[28676.072097] (0)WQ_WARN: cpu:0, proc:kworker/0:0, [thermal_zone_device_check+0x0/0x18]dur: 312942308 > 15ms
<6>[28676.079244] (0)[Gsensor] TL---fwq sensor operate get data
<6>[28676.080267] (0)[Gsensor] TCBF--gsensor data--acc[MMA8452Q_AXIS_X]=-1034, acc[MMA8452Q_AXIS_Y]=6014, acc[MMA8452Q_AXIS_Z]=7240
<6>[28676.081412] (0)[ALS/PS] ALS: 00000 => 00010
<1>[28676.089108] (0)[FM_NTC | MAIN]timer --->lock, cnt=0, pid=16628
<1>[28676.089189] (0)[FM_NTC | MAIN]timer <---unlock, cnt=1, pid=16628
<1>[28676.089950] (0)[FM_NTC | MAIN]rds_data --->lock, cnt=0, pid=16388
<1>[28676.089998] (0)[FM_NTC | MAIN]rds_data <---unlock, cnt=1, pid=16388
<6>[28676.139048] (0)[Gsensor] TL---fwq sensor operate get data
<6>[28676.139981] (0)[Gsensor] TCBF--gsensor data--acc[MMA8452Q_AXIS_X]=-881, acc[MMA8452Q_AXIS_Y]=6014, acc[MMA8452Q_AXIS_Z]=7546
<6>[28676.140942] (0)[ALS/PS] ALS: 00000 => 00010
<5>[28676.199240] (0)yaffs: yaffs: userdata sync do_checkpoint 0,gc_urgent 1
<5>[28676.199289] (0)yaffs: yaffs: userdata yaffs_FlushSuperBlock 0
<6>[28676.199627] (0)[Gsensor] TL---fwq sensor operate get data
<6>[28676.200656] (0)[Gsensor] TCBF--gsensor data--acc[MMA8452Q_AXIS_X]=-1034, acc[MMA8452Q_AXIS_Y]=6129, acc[MMA8452Q_AXIS_Z]=7278
<6>[28676.201796] (0)[ALS/PS] ALS: 00000 => 00010
<6>[28676.259192] (0)[Gsensor] TL---fwq sensor operate get data
<6>[28676.260192] (0)[Gsensor] TCBF--gsensor data--acc[MMA8452Q_AXIS_X]=-996, acc[MMA8452Q_AXIS_Y]=6014, acc[MMA8452Q_AXIS_Z]=7546
<6>[28676.261343] (0)[ALS/PS] ALS: 00000 => 00010
<6>[28676.319444] (0)[Gsensor] TL---fwq sensor operate get data
<6>[28676.320398] (0)[Gsensor] TCBF--gsensor data--acc[MMA8452Q_AXIS_X]=-957, acc[MMA8452Q_AXIS_Y]=6129, acc[MMA8452Q_AXIS_Z]=7508
<6>[28676.321458] (0)[ALS/PS] ALS: 00000 => 00010
<7>[28676.347468] (0)[16616:AsyncTask #2] fork [16630:AsyncTask #2]
<7>[28676.359713] (1)[16630:AsyncTask #2] set proc[16630] name: ->[dmesg]
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IMM76D
ro.build.display.id=ALPS.ICS2.MP.V1.18
ro.build.version.incremental=eng.pengfajun.1375500876
ro.custom.build.version=Intex_Cloud_Z5_V12_Indian
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=2013年 08月 03日 星期六 11:39:44 CST
ro.build.date.utc=1375501184
ro.build.type=user
ro.build.user=pengfajun
ro.build.host=fwq-System-Product-Name
ro.build.tags=test-keys
ro.product.model=Cloud Z5
ro.product.brand=Cloud Z5
ro.product.name=a28
ro.product.device=a28
ro.product.board=a28
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=alps
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=
persist.sys.timezone=Asia/Kolkata
# ro.build.product is obsolete; use ro.product.device
ro.build.product=a28
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=a28-user 4.0.4 IMM76D eng.pengfajun.1375500876 test-keys
ro.build.fingerprint=alps/a28/a28:4.0.4/IMM76D/1375500876:user/test-keys
ro.build.flavor=
ro.build.characteristics=default
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=ALPS.ICS2.MP.V1.18
ro.mediatek.platform=MT6577
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.ICS2.MP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=0
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=128m
# Encrypt phone function
ro.crypto.tmpfs_options=mode=0771,uid=1000,gid=1000
ro.crypto.fs_type=ext4
ro.crypto.fs_real_blkdev=/emmc@usrdata
ro.crypto.fs_mnt_point=/data
ro.crypto.fs_options=noauto_da_alloc
ro.crypto.fs_flags=0x00000406
# USB MTP WHQL
ro.sys.usb.mtp.whql.enable=0
# Power off opt in IPO
sys.ipo.pwrdncap=2
ro.sys.usb.storage.type=mtp,mass_storage
ro.shutoffanimation.enable=true
ro.operator.optr=CUST
#
# ADDITIONAL_BUILD_PROPERTIES
#
fmradio.driver.chip=3
ril.external.md=1
ro.sf.hwrotation=0
ril.current.share_modem=2
launcherplus.allappsgrid=2d
launcher2.allappsgrid=3d_20
curlockscreen=2
ro.mediatek.gemini_support=true
drm.service.enabled=true
fmradio.driver.enable=1
mediatek.wlan.chip=MT6628
mediatek.wlan.module.postfix=_mt6628
dalvik.vm.mtk-stack-trace-file=/data/anr/mtk_traces.txt
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Beep_03.ogg
ro.config.ringtone=Intex.mp3
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
wlan_mt6628 285607 0 - Live 0xbf1fb000 (P)
cfg80211 122000 0 - Live 0xbf1d2000
mtk_fm_priv 2855 0 - Live 0xbf1ce000 (P)
mtk_fm_drv 113233 1 mtk_fm_priv, Live 0xbf1aa000
mtk_stp_bt 39986 0 - Live 0xbf19d000
mtk_stp_gps 37294 0 - Live 0xbf190000
mtk_stp_uart 21589 1 - Live 0xbf187000 (P)
mtk_stp_wmt 375509 8 wlan_mt6628,mtk_fm_priv,mtk_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf11d000 (P)
mtk_hif_sdio 18482 2 wlan_mt6628,mtk_stp_wmt, Live 0xbf114000
devinfo 840 0 - Live 0xbf110000 (P)
devapc 4553 0 - Live 0xbf10b000 (P)
sec 90923 0 - Live 0xbf0ee000 (P)
vcodec_kernel_driver 42942 2 - Live 0xbf0de000 (P)
m4u 114125 28 - Live 0xbf0b9000 (P)
ccmni 17150 0 - Live 0xbf0b0000 (P)
ccci 117392 15 ccmni, Live 0xbf088000 (P)
ccci_plat 127712 2 ccmni,ccci, Live 0xbf05f000 (P)
mtk_drvb_77 6081 0 - Live 0xbf05a000 (P)
mtklfb 23570 0 - Live 0xbf050000
pvrsrvkm 233143 85 mtklfb, Live 0xbf009000
aed 16308 3 - Live 0xbf000000 (P)
RAM: 512 MB (496 MB available)
System RAM: 496.000MB
mtkfb.0: 6.000MB
Flash: 8 GB (7.321 GB actual); 0.5 GB (0.471 GB actual)
mmcblk0: 7.321 GB
mtdblock: 0.018 GB
mtdblock1: 0.471 GB
Touch Screen for alps Cloud Z5
$2.55 New Japan Alps dual 6-pin volume potentiometer a10k b10k 50K 100K
$58.54 Japan ALPS Alps RDC9010006 robot and industrial machinery / communication equipment sensors
$41.04 ALPS 50KAx2 RK168 Series Rotary Potentiometer with Motor Dual-unit Flat-shaft Length:20mm
$4.14 ALPS RKJXM EL25 Hollow Shaft Encoder Switch with Joystick 8-way Multi Function Switch
Replacement Battery for alps Cloud Z5
$2.55 New Japan Alps dual 6-pin volume potentiometer a10k b10k 50K 100K
$41.04 ALPS 50KAx2 RK168 Series Rotary Potentiometer with Motor Dual-unit Flat-shaft Length:20mm
$58.54 Japan ALPS Alps RDC9010006 robot and industrial machinery / communication equipment sensors
$4.14 ALPS RKJXM EL25 Hollow Shaft Encoder Switch with Joystick 8-way Multi Function Switch
Cover Cases for alps Cloud Z5
$2.55 New Japan Alps dual 6-pin volume potentiometer a10k b10k 50K 100K
$4.14 ALPS RKJXM EL25 Hollow Shaft Encoder Switch with Joystick 8-way Multi Function Switch
$58.54 Japan ALPS Alps RDC9010006 robot and industrial machinery / communication equipment sensors
$41.04 ALPS 50KAx2 RK168 Series Rotary Potentiometer with Motor Dual-unit Flat-shaft Length:20mm
Find Similar devices | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |