LGE LG-F200L 规格

一般信息
操作系统的详细信息
CPU信息
图形处理器细节
WiFi内核信息
build.prop
的内核模块
存储器映射

一般规格
生产厂家	LGE
型号	LG-F200L
Android版	5.1; f07f11989e; SDK22
中央处理单元	2 cores; LGE MSM8960 VU2 msm8960; Max: 1512.0 MHz; Min: 384.0 MHz
显示	950 x 768; DPI: 280; Evaluated Size: 4.4"
触摸屏	Multitouch 7 points
图形处理器	Adreno (TM) 225; Qualcomm; OpenGL ES-CM 1.1; OpenGL ES 2.0 V@45.0 AU@04.04.02.007.049 (CL@)
内存RAM	2048 MB (1908 MB available)
快闪记忆体	16 GB (14.676 GB actual); 4 GB (3.660 GB actual) (见存储器映射选项卡)
沟通
电话	GSM; Net: UMTS
WiFi	; IEEE 802.11 b/g/n; Broadcom 4329/30; AP Mode; IEEE 802.11 ac/a/b/g/n; Qualcomm MSM8960; AP Mode
USB主机	No
蓝牙	Bluetooth 4.0
全球定位系统	No
高级功能
前置摄像头	Photo: 8.0 MP; Max: 3264x2448; Video: 2.1 MP; Max: 1920x1080; Focus: auto infinity normal macro continuous-picture continuous-video; Flash modes: off auto on torch
背照相机	Photo: 1.2 MP; Max size: 1280x960; Video: 0.9 MP; Max: 1280x720; Focus: infinity; No flash
传感器	LGE Accel & Gyro Sensor (InvenSense); range: 0...39.227; resolution: 0.001 (0.003%); power: 0.5mA;
	LGE Magnetometer Sensor (Aichi Steel); range: 0...6.248; resolution: 0.018 (0.293%); power: 0.15mA;
	LGE Proximity Sensor (Avago); range: 0...10.001; resolution: 0.101 (1.007%); power: 34.464mA;
	LGE Ambient Light Sensor (Avago); range: 0...10000; resolution: 0.01 (0%); power: 0.17mA;
	LGE Accel & Gyro Sensor (InvenSense); range: 0...17.453; resolution: 0.001 (0.006%); power: 3.6mA;
	LGE Gravity Sensor (LG Electronics Inc.); range: 0...39.227; resolution: 0.001 (0.003%); power: 4.1mA;
	LGE Linear Acceleration Sensor (LG Electronics Inc.); range: 0...39.227; resolution: 0.001 (0.003%); power: 4.1mA;
	LGE Rotation Vector Sensor (LG Electronics Inc.); range: 0...1; resolution: 0 (0%); power: 4.25mA;
震动模式	Yes
支持的语言	174; Afrikaans; Aghem; Akan; Amharic; Arabic; Assamese; Asu; Asturian; Azerbaijani; Basaa; Belarusian; Bemba; Bena; Bulgarian; Bambara; Bengali; Tibetan; Breton; Bodo; Bosnian; Catalan; Chiga; Cherokee; Czech; Welsh; Danish; Taita; German; Zarma; Duala; Jola-Fonyi; Dzongkha; Embu; Ewe; Greek; English; Esperanto; Spanish; Estonian; Basque; Ewondo; Persian; Fulah; Finnish; Filipino; Faroese; French; Irish; Galician; Swiss German; Gujarati; Gusii; Manx; Hausa; Hawaiian; Hebrew; Hindi; Croatian; Hungarian; Armenian; Indonesian; Igbo; Sichuan Yi; Icelandic; Italian; Japanese; Ngomba; Machame; Georgian; Kabyle; Kamba; Makonde; Kabuverdianu; Koyra Chiini; Kikuyu; Kazakh; Kako; Kalaallisut; Kalenjin; Khmer; Kannada; Korean; Konkani; Kashmiri; Shambala; Bafia; Cornish; Kyrgyz; Langi; Luxembourgish; Ganda; Lakota; Lingala; Lao; Lithuanian; Luba-Katanga; Luo; Luyia; Latvian; Masai; Meru; Morisyen; Malagasy; Makhuwa-Meetto; Meta'; Macedonian; Malayalam; Mongolian; Marathi; Malay; Maltese; Mundang; Burmese; Nama; Norwegian; North Ndebele; Nepali; Dutch; Kwasio; Norwegian; Ngiemboon; Nuer; Nyankole; Oromo; Oriya; Punjabi; Polish; Pashto; Portuguese; Romansh; Rundi; Romanian; Rombo; Russian; Kinyarwanda; Rwa; Samburu; Sangu; Sena; Koyraboro Senni; Sango; Tachelhit; Sinhala; Slovak; Slovenian; Shona; Somali; Albanian; Serbian; Swedish; Swahili; Congo Swahili; Tamil; Telugu; Teso; Thai; Tigrinya; Tongan; Turkish; Tasawaq; Central Atlas Tamazight; Uyghur; Ukrainian; Urdu; Uzbek; Vai; Vietnamese; Vunjo; Soga; Yangben; Yoruba; Standard Moroccan Tamazight; Chinese; Zulu
电池	Technology: Li-ion; Voltage: 3683
FM radio	FM Radio
Owner's comment:	AltRom: Alternative Firmware;
SD Version:	1.1 7

KERNEL: Linux version 3.4.0-perf-ge767611-dirty (giahungpro@Tekcafe.vn) (gcc version 4.7.2 20120731 (prerelease) (Linaro GCC 4.7-2012.08) ) #3 SMP PREEMPT Wed Apr 1 14:02:41 ICT 2015
CODENAME: REL
Mainboard: msm8960
BRAND: lge
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: vu2u
DISPLAY: cm_vu2u-userdebug 5.1 LMY47I f07f11989e test-keys
FINGERPRINT: lge/cm_vu2u/vu2u:5.1/LMY47I/f07f11989e:userdebug/test-keys
HARDWARE: fx1sk
ID: LMY47I
TAGS: test-keys

Processor : ARMv7 Processor rev 4 (v7l)
processor : 0
BogoMIPS : 13.54
processor : 1
BogoMIPS : 13.54
Features : swp half thumb fastmult vfp edsp neon vfpv3 tls vfpv4
CPU implementer : 0x51
CPU architecture: 7
CPU variant : 0x1
CPU part : 0x04d
CPU revision : 4
Hardware : LGE MSM8960 VU2
Revision : 000a
Serial : 0000000000000000

GL_AMD_compressed_ATC_texture
GL_AMD_performance_monitor
GL_AMD_program_binary_Z400
GL_EXT_debug_label
GL_EXT_debug_marker
GL_EXT_discard_framebuffer
GL_EXT_robustness
GL_EXT_texture_format_BGRA8888
GL_EXT_texture_type_2_10_10_10_REV
GL_NV_fence
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_depth_texture
GL_OES_depth24
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_element_index_uint
GL_OES_fbo_render_mipmap
GL_OES_fragment_precision_high
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_depth_texture_cube_map
GL_OES_rgb8_rgba8
GL_OES_standard_derivatives
GL_OES_texture_3D
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_texture_half_float_linear
GL_OES_texture_npot
GL_OES_vertex_half_float
GL_OES_vertex_type_10_10_10_2
GL_OES_vertex_array_object
GL_QCOM_alpha_test
GL_QCOM_binning_control
GL_QCOM_driver_control
GL_QCOM_perfmon_global_mode
GL_QCOM_extended_get
GL_QCOM_extended_get2
GL_QCOM_tiled_rendering
GL_QCOM_writeonly_rendering
GL_AMD_compressed_3DC_texture
GL_EXT_sRGB
GL_EXT_sRGB_write_control
GL_EXT_texture_sRGB_decode
GL_EXT_texture_filter_anisotropic
GL_EXT_multisampled_render_to_texture

<6>[74507.048540 / 10-29 15:38:09.698][0] mmc0: mmc_start_bkops: raw_bkops_status=0x2, from_exception=1
<4>[74507.225101 / 10-29 15:38:09.878][0] >>>pet_watchdog_work [system rev: 10][raw ver: 7]
<6>[74507.556155 / 10-29 15:38:10.209][0] mmc0: mmc_start_bkops: Starting bkops
<4>[74507.562198 / 10-29 15:38:10.209][1] send sigkill to 5359 (d.process.acore), adj 764, size 9373
<4>[74508.063587 / 10-29 15:38:10.709][0] wl_android_wifi_off in
<4>[74508.071400 / 10-29 15:38:10.719][0] wifi_set_power = 0
<3>[74508.071461 / 10-29 15:38:10.719][0] bcm_wifi_set_power: wifi power successed to pull down
<4>[74508.071492 / 10-29 15:38:10.719][0] =========== WLAN placed in RESET ========
<4>[74508.093405 / 10-29 15:38:10.739][1] send sigkill to 11646 (e.process.gapps), adj 1000, size 9056
<4>[74508.182921 / 10-29 15:38:10.829][0]
<4>[74508.182952 / 10-29 15:38:10.829][0] Dongle Host Driver, version 1.88.67 (r)
<4>[74508.182952 / 10-29 15:38:10.829][0] Compiled in drivers/net/wireless/bcmdhd/src on Apr 1 2015 at 07:13:42
<4>[74508.182982 / 10-29 15:38:10.829][0] wl_android_wifi_on in
<4>[74508.183013 / 10-29 15:38:10.829][0] wifi_set_power = 1
<3>[74508.437919 / 10-29 15:38:11.090][0] bcm_wifi_set_power: wifi power successed to pull up
<4>[74508.437950 / 10-29 15:38:11.090][0] =========== WLAN going back to live ========
<4>[74508.553897 / 10-29 15:38:11.200][0] F1 signature OK, socitype:0x1 chip:0x4334 rev:0x3 pkg:0x2
<4>[74508.555728 / 10-29 15:38:11.210][0] DHD: dongle ram size is set to 524288(orig 524288) at 0x0
<4>[74508.558108 / 10-29 15:38:11.210][0] dhdsdio_download_firmware: firmware path=/system/etc/firmware/fw_bcmdhd.bin, nvram path=/system/etc/wifi/bcmdhd.cal
<6>[74508.594214 / 10-29 15:38:11.240][0] sps:BAM 0x124c2000 enabled: ver:0x5, number of pipes:6dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
<4>[74509.023025 / 10-29 15:38:11.670][0] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
<4>[74509.031083 / 10-29 15:38:11.680][0] dhd_preinit_ioctls : Set IOCTL response time.
<4>[74509.035752 / 10-29 15:38:11.690][0] Firmware up: op_mode=0x0015, Broadcom Dongle Host Driver mac=00:90:4c:c5:12:38
<4>[74509.092032 / 10-29 15:38:11.740][0] dhdcdc_set_ioctl: SET PM to 2
<4>[74509.114037 / 10-29 15:38:11.760][0] dhd_wl_ioctl: WLC_SET_VAR: ampdu_hostreorder, ret = -23
<4>[74509.114067 / 10-29 15:38:11.760][0] dhd_preinit_ioctls wl ampdu_hostreorder failed -23
<3>[74509.115044 / 10-29 15:38:11.770][0] /data/misc/wifi/config: Failed to get information (-2)
<4>[74509.115838 / 10-29 15:38:11.770][0] Firmware version = wl0: Dec 6 2012 13:38:44 version 6.10.58.82 (r) FWID 01-200
<4>[74509.116875 / 10-29 15:38:11.770][0] dhd_wl_ioctl: WLC_GET_VAR: pfnlbest, ret = -23
<6>[74509.118371 / 10-29 15:38:11.770][0] CFG80211-INFO2) wl_cfg80211_attach_post : p2p0: p2p_dev_addr=02:90:4c:c5:12:38
<4>[74509.449029 / 10-29 15:38:12.101][1] dhd_set_suspend: Remove extra suspend setting
<6>[74509.578649 / 10-29 15:38:12.231][0] CFG80211-TRACE) __wl_cfg80211_scan : START SCAN
<4>[74510.390033 / 10-29 15:38:13.032][1] send sigkill to 11779 (id.partnersetup), adj 1000, size 7744
<6>[74510.400440 / 10-29 15:38:13.042][0] report_state_of_charge: Reported SOC = 71
<6>[74510.402546 / 10-29 15:38:13.042][0] [WIRELESS]-0 >>>
<6>[74510.402577 / 10-29 15:38:13.042][0] | wireless_charging=0
<6>[74510.402607 / 10-29 15:38:13.042][0] | DC_IRQ=0(GPIO=0) , USB_IRQ=0
<6>[74510.402607 / 10-29 15:38:13.042][0] | VIN_MIN=4300mV , DC_IN=45mV
<6>[74510.402638 / 10-29 15:38:13.042][0] | VBAT_MAX=4350mV , VBAT_LOW=4240mV
<6>[74510.402668 / 10-29 15:38:13.042][0] | Maxim_Volt=3635mV , BMS_Volt=3439mV
<6>[74510.402668 / 10-29 15:38:13.042][0] | Maxim_SOC=54 , BMS_SOC=77
<6>[74510.402699 / 10-29 15:38:13.042][0] | IBAT_MAX=775mA , IBAT=1038mA , ITERM=100mA
<6>[74510.402729 / 10-29 15:38:13.042][0] | FET_IRQ=1 , FET_FORCE=0 , FSM=3 , Dis_Bit=0 , Auto_Enable=1 , RegLoop=9
<6>[74510.402729 / 10-29 15:38:13.042][0] | Low_IRQ=1 , FAST_IRQ=0
<6>[74510.402760 / 10-29 15:38:13.042][0] | BAT_TEMP=45 , XO_Therm=45(100) , XO_Mitigation=0
<6>[74510.402790 / 10-29 15:38:13.042][0] | chg_batt_temp_state=3 , last_stop_charging=0 , pseudo_ui_charging=0
<6>[74510.402790 / 10-29 15:38:13.042][0] [WIRELESS]-0 <<<
<6>[74510.404316 / 10-29 15:38:13.042][0] calculate_state_of_charge: last_ocv_uv = 4275822chargecycles = 1, batt_temp = 447fcc = 2091000 soc =72
<6>[74510.405629 / 10-29 15:38:13.052][0] report_state_of_charge: Reported SOC = 71
<6>[74510.436057 / 10-29 15:38:13.082][0] adjust_soc: ibat_ua = 1129600, vbat_uv = 3489795, ocv_est_uv = 3737177, pc_est = 29, soc_est = 13, n = 100, delta_ocv_uv = 50, last_ocv_uv = 4275772, pc_new = 97, soc_new = 71, rbatt = 219, m = 11
<6>[74510.437339 / 10-29 15:38:13.082][0] bms_soc_monitor_work: [BMS_INFO] soc=76% vbatt=3506V temp=44 ibat=1129mA

# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=LMY47I
ro.build.display.id=cm_vu2u-userdebug 5.1 LMY47I f07f11989e test-keys
ro.build.version.incremental=f07f11989e
ro.build.version.sdk=22
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=5.1
ro.build.date=Thứ tư, 01 Tháng tư năm 2015 12:01:49 ICT
ro.build.date.utc=1427864509
ro.build.type=userdebug
ro.build.user=giahungpro
ro.build.host=Tekcafe.vn
ro.build.tags=test-keys
ro.build.flavor=cm_vu2u-userdebug
ro.product.brand=lge
ro.product.name=cm_vu2u
ro.product.board=msm8960
# ro.product.cpu.abi and ro.product.cpu.abi2 are obsolete,
# use ro.product.cpu.abilist instead.
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.cpu.abilist=armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=
ro.product.manufacturer=LGE
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8960
# ro.build.product is obsolete; use ro.product.device
ro.build.product=vu2u
ro.product.model=LG-F200L
ro.product.device=vu2u
# Do not try to parse description, fingerprint, or thumbprint
ro.build.description=cm_vu2u-userdebug 5.1 LMY47I f07f11989e test-keys
ro.build.fingerprint=lge/cm_vu2u/vu2u:5.1/LMY47I/f07f11989e:userdebug/test-keys
ro.build.characteristics=default
ro.cm.device=vu2u
# end build properties
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.rommanager.developerid=cyanogenmod
ro.com.google.clientidbase=android-google
keyguard.no_require_sim=true
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.build.selinux=1
persist.sys.dun.override=0
persist.sys.root_access=0
ro.cm.version=12.1-20150401-NIGHTLY-vu2u
ro.cm.releasetype=NIGHTLY
ro.modversion=12.1-20150401-NIGHTLY-vu2u
ro.cmlegal.url=https://cyngn.com/legal/privacy-policy
persist.sys.recovery_update=false
ro.cm.display.version=12.1-20150401-NIGHTLY-vu2u
ro.config.notification_sound=Argon.ogg
ro.config.alarm_alert=Helium.ogg
ro.config.ringtone=Orion.ogg
ro.carrier=unknown
ro.opengles.version=196608
persist.audio.handset.mic.type=digital
persist.audio.dualmic.config=endfire
persist.audio.fluence.voicecall=true
persist.audio.handset.mic=dmic
persist.audio.fluence.mode=endfire
persist.audio.lowlatency.rec=false
af.resampler.quality=4
persist.radio.apm_sim_not_pwdn=1
ro.telephony.call_ring.multiple=0
ro.telephony.ril_class=LgeLteRIL
ro.telephony.ril.config=qcomdsds
persist.hwc.mdpcomp.enable=true
drm.service.enabled=true
wifi.interface=wlan0
wifi.supplicant_scan_interval=180
media.aac_51_output_enabled=true
debug.egl.recordable.rgba8888=1
ro.qc.sensors.wl_dis=true
ro.qualcomm.sensors.smd=true
ro.sf.lcd_density=280
ro.bt.bdaddr_path=/data/misc/bdaddr
ro.telephony.default_network=9
telephony.lteOnGsmDevice=1
ro.hwui.text_cache_width=2048
ro.qualcomm.cabl=1
persist.gps.qmienabled=true
ro.vendor.extension_library=/system/lib/libqc-opt.so
ro.use_data_netmgrd=true
persist.data.netmgrd.qos.enable=false
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=96m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
persist.sys.dalvik.vm.lib.2=libart.so
dalvik.vm.isa.arm.features=div
dalvik.vm.lockprof.threshold=500
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
qemu.hw.mainkeys= 0

RAM: 2048 MB (1908 MB available)

System RAM: 134.000MB
System RAM: 253.000MB
System RAM: 56.000MB
System RAM: 1464.996MB

Flash: 16 GB (14.676 GB actual); 4 GB (3.660 GB actual)

mmcblk0: 14.676 GB
mmcblk1: 3.660 GB

Find Similar devices
Same CPU:
Same Display resolution:
Same ro.build.description:

触摸屏为 LGE LG-F200L

新电池 LGE LG-F200L

占地面积 LGE LG-F200L