- General
- Detalles OS
- CPU info
- GPU extensiones
- Mensajes del kernel WiFi
- build.prop
- Módulos
- Mapa de la memoria
Especificaciones generales | |
---|---|
Marca | alps |
Modelo | e1811_v75_jbaol1_g20 |
Versión de Android | 4.0.3; eng.root.1344662265; SDK15 |
CPU | 1 core; ARMv7 Processor rev 10 (v7l); Max: 1001,0 MHz; Min: 166,8 MHz |
Pantalla | 960 x 540; DPI: 240; Evaluated Size: 4,6" |
Pantalla táctil | Multitouch 5 points |
GPU | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.8@789263 |
RAM | 512 MB (485 MB available) |
Flash | 4 GB (3.631 GB actual) (ver pestaña de mapa de memoria) |
Comunicaciones | |
Teléfono | GSM, Dual SIM |
WiFi | wlan; IEEE 802.11 a/b/g/n; MediaTek MT6620; AP Mode |
USB Host | No |
Bluetooth | Bluetooth 4.0+HS |
GPS | No |
Funciones avanzadas | |
Cámara frontal | Photo: 8.0 MP; Max: 3264x2448; Focus: auto continuous-picture continuous-video macro infinity manual fullscan; Flash modes: auto on off torch |
Cámara trasera | Photo: 0.3 MP; Max size: 640x480; Focus: infinity; Flash modes: off |
Sensores | bma222 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; |
tmd2771 Proximity Sensor (Capella); range: 0...1; resolution: 1 (100%); power: 0,13mA; | |
tmd2771 Light Sensor (Capella); range: 0...10240; resolution: 1 (0,01%); power: 0,13mA; | |
Alarma vibrante | Yes |
Idiomas soportados | 43; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
Batería | Technology: Li-ion; Voltage: 3780 |
FM radio | 76 to 108MHz |
SD Version: | 1.1 5 |
KERNEL: Linux version 3.0.13 (root@abc-desktop) (gcc version 4.4.3 (GCC) ) #1 PREEMPT Sat Aug 11 13:17:30 CST 2012
CODENAME: REL
Mainboard: e1811_v75_jbaol1_g20
BRAND: alps
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: e1811_v75_jbaol1_g20
DISPLAY: ALPS.ICS.MP.V1.11
FINGERPRINT: alps/e1811_v75_jbaol1_g20/e1811_v75_jbaol1_g20:4.0.3/IML74K/1344662265:user/test-keys
HARDWARE: mt6575
ID: IML74K
TAGS: test-keys
Processor : ARMv7 Processor rev 10 (v7l)
BogoMIPS : 1993.93
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc09
CPU revision : 10
Hardware : MT6575
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<7>[ 298.063811] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 9774538 > 8ms
<7>[ 298.063845] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 298.067346] [1630:dmesg] exit
<7>[ 298.067567] [1630:dmesg] sig 17 to [1626:AsyncTask #2]
<7>[ 298.083509] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 11913077 > 8ms
<7>[ 298.083540] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 298.110696] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 17654692 > 8ms
<7>[ 298.110728] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 298.143419] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 24422000 > 8ms
<7>[ 298.143451] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 298.161794] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 11034077 > 8ms
<7>[ 298.161824] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 298.183111] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 12969000 > 8ms
<7>[ 298.183142] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 298.201064] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 9896384 > 8ms
<7>[ 298.201096] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 298.215189] [283:WifiStateMachin] fork err at pid
<7>[ 298.215215] [283:WifiStateMachin] fork [1634:WifiStateMachin]
<7>[ 298.215668] [1634:WifiStateMachin] set proc[1634] name: ->[loadDriverThrea]
<7>[ 298.222295] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 12061692 > 8ms
<7>[ 298.222326] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 298.240368] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 8847231 > 8ms
<7>[ 298.240399] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<6>[ 298.257446] [WLAN] rfkill_set_block(blocked 0)
<6>[ 298.257457] [WLAN] Power on
<3>[ 298.257470] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<4>[ 298.258276] [STP-PSM] [I]_stp_psm_disable: PSM MODE Disable=============================>
<4>[ 298.258283]
[STP-PSM] [I]_stp_psm_dump_active_q: Active op list:++
<4>[ 298.260068] [STP-PSM] [I]_stp_psm_dump_active_q: STP_OPID_PSM_WAKEUP
<4>[ 298.260858] [STP-PSM] [I]_stp_psm_dump_active_q: Active op list:--
<7>[ 298.261741] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 14218769 > 8ms
<7>[ 298.261768] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<4>[ 298.262124] [STP-PSM] [I]_stp_psm_set_state: work_state = INACT --> INACT_ACT
<6>[ 298.263025] src = COMBO_IF_UART, to enter deep idle? 0
<4>[ 298.263050] [STP-PSM] [I]_stp_psm_wait_wmt_event: _stp_psm_wait_wmt_event, stp_psm->flag=0x0000000c
<4>[ 298.264173] [STP-PSM] [I]_stp_psm_wait_wmt_event: _stp_psm_wait_wmt_event, stp_psm->flag=0x0000000c
<3>[ 298.265310] [WMT-CORE][I]opfunc_pwr_sv:**** Send wakeup command
<4>[ 298.266264] [STP-PSM] [I]_stp_psm_notify_wmt_wakeup_wq: OPID(1) type(0) bRet(1)
<4>[ 298.266270]
<3>[ 298.268745] [WMT-CORE][I]opfunc_pwr_sv:Send wakeup command OK!
<3>[ 298.269490] [WMT-CORE][I]opfunc_pwr_sv:Do STP-CB! 2 bf119f28
<7>[ 298.272949] [242:er.ServerThread] fork err at pid
<7>[ 298.272976] [242:er.ServerThread] fork [1635:er.ServerThread]
<4>[ 298.276450] [STP-PSM] [I]_stp_psm_wait_wmt_event: _stp_psm_wait_wmt_event, stp_psm->flag=0x0000000e
<7>[ 298.280055] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 11844308 > 8ms
<7>[ 298.280096] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<4>[ 298.284264] [STP-PSM] [I]_stp_psm_set_state: work_state = INACT_ACT --> ACT
<7>[ 298.289594] [1635:er.ServerThread] set proc[1635] name: ->[Thread-177]
<7>[ 298.293685] [1635:Thread-177] exit
<4>[ 298.293745] [STP-PSM] [I]_stp_psm_do_wait: +Total waits for ACT takes 0 msec
<4>[ 298.294615] [STP-PSM] [I]_stp_psm_disable: PSM MODE Disable<============================
<4>[ 298.294621]
<4>[ 298.295820] mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[ 298.296513] board_sdio_ctrl force off before on
<6>[ 298.296520] mtk_wcn_cmb_sdio_off (3)
<6>[ 298.296560] mtk_wcn_cmb_sdio_on (3)
<3>[ 298.296594] msdc3 -> USR Resume <- msdc_pm() : L<1436> PID
<7>[ 298.299663] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 12087308 > 8ms
<7>[ 298.299698] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<3>[ 298.310817] msdc3 -> ================ <- msdc_set_mclk() : L<756> PID
<3>[ 298.311837] msdc3 -> !!! Set<400KHz> Source<197000KHz> -> sclk<397KHz> DDR<0> mode<0> div<124> <- msdc_set_mclk() : L<758> PID
<3>[ 298.313468] msdc3 -> ================ <- msdc_set_mclk() : L<759> PID
<3>[ 298.336667] msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1496> PID
<3>[ 298.379654] msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<3421> PID
<3>[ 298.380812] msdc3 -> ================ <- msdc_set_mclk() : L<756> PID
<3>[ 298.381826] msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<758> PID
<3>[ 298.383480] msdc3 -> ================ <- msdc_set_mclk() : L<759> PID
<6>[ 298.385654] mmc2: new high speed SDIO card at address 0001
<6>[ 298.387375] [WMT-DFT][I]hif_sdio_probe:start!
<6>[ 298.387391] [WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x20a) num(0x1)
<6>[ 298.387401] [WMT-DFT][I]hif_sdio_probe:card->info[0]: MediaTek MT6620 Wireless Combo Chip
<6>[ 298.387410] [WMT-DFT][I]hif_sdio_probe:card->info[1]:
<6>[ 298.387417] [WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[ 298.387522] [WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(520192)
<7>[ 298.387558] WQ_WARN: cpu:1, proc:kworker/u:3, dur: 88980615 > 8ms
<7>[ 298.387575] work: mmc_rescan+0x0/0x370
<7>[ 298.436543] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 11189615 > 8ms
<7>[ 298.436581] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<6>[ 298.450700] [WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[ 298.450896] [2:kthreadd] fork err at pid
<7>[ 298.450926] [2:kthreadd] fork [1636:kthreadd]
<6>[ 298.452251] [WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<5>[ 298.452296] [wlan] net_device prDev(0xcc86b000) allocated
<5>[ 298.461098] [wlan] Open FW image: WIFI_RAM_CODE done
<4>[ 298.462384] [RT_MONITOR]WARNNING [1636:ksdioirqd/mmc2] SET NOT ALLOW RT Prio [1] for proc [1636:ksdioirqd/mmc2]
<4>[ 298.463638] Backtrace:
<4>[ 298.463967] [
<4>[ 298.465009] r7:00000001 r6:00000000 r5:cac38000 r4:d3afbc00
<4>[ 298.465722] [
<5>[ 298.467609] [wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[ 298.468421] [wlan] Virtual Address = de811000 for COMMON MGMT MEMORY POOL.
<5>[ 298.469264] [wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[ 298.469918] [wlan] Virtual Address = de813000 for SW_RFB_T.
<5>[ 298.470926] [wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[ 298.471613] [wlan] Virtual Address = de817000 for MSDU_INFO_T.
<6>[ 298.472327] [wlan] wlanAdapterStart(): Acquiring LP-OWN
<4>[ 298.474211] [
<4>[ 298.477385] [
<4>[ 298.480594] [
<4>[ 298.483762] [
<4>[ 298.486711] r7:00000013 r6:c0087f5c r5:c009f5dc r4:dd783d78
<6>[ 298.490752] [wlan] Chip ID: 0x6620
<6>[ 298.490765] [wlan] Revision ID: 0x1
<7>[ 298.494871] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 27834846 > 8ms
<7>[ 298.494905] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 298.557328] [1618:Thread-183] exit
<7>[ 298.569148] [1623:Thread-185] exit
<7>[ 298.573074] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 15488077 > 8ms
<7>[ 298.573104] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 298.866819] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 29044000 > 8ms
<7>[ 298.866850] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 298.886458] WQ_WARN: cpu:1, proc:kworker/u:3, dur: 8944000 > 8ms
<7>[ 298.886489] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 298.906099] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 12695769 > 8ms
<7>[ 298.906130] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 298.925739] WQ_WARN: cpu:1, proc:kworker/u:3, dur: 12608077 > 8ms
<7>[ 298.925770] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 298.945383] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 10862769 > 8ms
<7>[ 298.945414] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 298.965033] WQ_WARN: cpu:1, proc:kworker/u:3, dur: 10706077 > 8ms
<7>[ 298.965064] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 298.984670] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 12679231 > 8ms
<7>[ 298.984701] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 299.004315] WQ_WARN: cpu:1, proc:kworker/u:3, dur: 12606384 > 8ms
<7>[ 299.004346] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 299.023954] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 13230462 > 8ms
<7>[ 299.023985] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 299.043605] WQ_WARN: cpu:1, proc:kworker/u:3, dur: 12897923 > 8ms
<7>[ 299.043636] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 299.063250] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 13013538 > 8ms
<7>[ 299.063281] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 299.082884] WQ_WARN: cpu:1, proc:kworker/u:3, dur: 12894385 > 8ms
<7>[ 299.082915] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 299.102553] WQ_WARN: cpu:1, proc:kworker/u:3, dur: 14551462 > 8ms
<7>[ 299.102584] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 299.122232] WQ_WARN: cpu:1, proc:kworker/u:3, dur: 14524461 > 8ms
<7>[ 299.122261] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<6>[ 299.195746] [wlan] wlanAdapterStart(): Waiting for Ready bit..
<6>[ 299.570669] [wlan] Ready bit asserted
<5>[ 299.617458] [wlan] [wifi] wlan%d netif_carrier_off
<6>[ 299.618049] [wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[ 299.618124] [wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[ 299.618217] [wlan] Domain: map=0, idx=0, code=0x0000
<7>[ 299.619256] [2:kthreadd] fork err at pid
<7>[ 299.619279] [2:kthreadd] fork [1637:kthreadd]
<5>[ 299.619313] [wlan] tx_thread starts running...
<6>[ 299.621746] [WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(20a) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[ 299.621760] [WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[ 299.621778] [WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:2 f:0 g:0 w:2 lpbk:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[ 299.623127] [STP-PSM] [I]_stp_psm_enable: PSM MODE Enable==============================>
<4>[ 299.623134]
[STP-PSM] [I]_stp_psm_dump_active_q: Active op list:++
<4>[ 299.624908] [STP-PSM] [I]_stp_psm_dump_active_q: STP_OPID_PSM_WAKEUP
<4>[ 299.625698] [STP-PSM] [I]_stp_psm_dump_active_q: Active op list:--
<4>[ 299.626481] [STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<4>[ 299.632610] [STP-PSM] [I]_stp_psm_notify_wmt_wakeup_wq: OPID(1) type(0) bRet(1)
<4>[ 299.632617]
<4>[ 299.633713] [STP-PSM] [I]_stp_psm_do_wait: +Total waits for ACT takes 0 msec
<4>[ 299.634732] [STP-PSM] [I]_stp_psm_enable: PSM MODE Enable<=============================
<4>[ 299.634740]
<3>[ 299.639739] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<7>[ 299.645313] [1634:loadDriverThrea] exit
<7>[ 299.655422] [143:netd] fork err at pid
<7>[ 299.655452] [143:netd] fork [1638:netd]
<7>[ 299.656653] [1638:netd] set proc[1638] name: ->[ip]
<7>[ 299.664848] [1638:ip] exit
<7>[ 299.665068] [1638:ip] sig 17 to [143:netd]
<7>[ 299.675467] [1631:kworker/u:3] fork err at pid
<7>[ 299.675498] [1631:kworker/u:3] fork [1639:kworker/u:3]
<7>[ 299.675784] [1639:kworker/u:3] fork err at pid
<7>[ 299.675803] [1639:kworker/u:3] fork [1640:kworker/u:3]
<7>[ 299.675952] [1640:kworker/u:3] exit
<7>[ 299.675985] [1640:kworker/u:3] sig 17 to [1639:kworker/u:3]
<7>[ 299.676026] [1639:kworker/u:3] exit
<6>[ 299.677044] [RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[ 299.677070] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[ 299.691146] WQ_WARN: cpu:0, proc:kworker/0:2, dur: 13958616 > 8ms
<7>[ 299.691220] work: wlanSetMulticastListWorkQueue+0x0/0x1f4 [wlan]
<7>[ 299.692409] [1:init] fork err at pid
<7>[ 299.692434] [1:init] fork [1641:init]
<7>[ 299.693195] [283:WifiStateMachin] fork err at pid
<7>[ 299.693220] [283:WifiStateMachin] fork [1642:WifiStateMachin]
<7>[ 299.693996] [1642:WifiStateMachin] set proc[1642] name: ->[WifiMonitor]
<7>[ 299.702049] [1641:init] set proc[1641] name: ->[logwrapper]
<7>[ 299.708093] [1641:logwrapper] fork err at pid
<7>[ 299.708125] [1641:logwrapper] fork [1643:logwrapper]
<7>[ 299.711067] [1643:logwrapper] set proc[1643] name: ->[wpa_supplicant]
<5>[ 299.800932] [wlan] N=0 closed
<5>[ 299.801368] [wlan] EVENT-ROAMING ABORT: Current Time = -220
<5>[ 299.802051] [wlan] [13] TRANSITION: [0] -> [0]
<6>[ 299.808496] [wlan] NAF=0,0,0
<6>[ 299.808511] [wlan] NAF=0,0,0
<5>[ 299.961620] [wlan] [13] TRANSITION: [0] -> [2]
<5>[ 300.019907] [Power/Alarm] alarm 2 set 86441.416000000
<5>[ 300.243486] [Power/Battery] [FGADC] 0,5668,0,-34,3893,62,61,62,1980,1984,111,0,0,1000,0,3778,1000,38,39,5668,100,103
<0>[ 300.244969] [MUSB]mt_usb_disconnect 299: [MUSB] USB is ready for disconnect
<5>[ 300.346616] [wlan] [13] TRANSITION: [2] -> [0]
<6>[ 300.351506] [wlan] NAF=0,0,0
<5>[ 300.381137] [Power/Alarm] alarm 2 set 86441.416000000
<7>[ 300.401011] [539:Thread-33] fork err at pid
<7>[ 300.401037] [539:Thread-33] fork [1644:Thread-33]
<7>[ 300.403605] [1644:Thread-33] set proc[1644] name: ->[RefQueueWorker@]
<7>[ 300.413754] WQ_WARN: cpu:1, proc:kworker/u:3, dur: 12911153 > 8ms
<7>[ 300.413784] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 300.438469] [1620:com.specdevice] exit
<7>[ 300.442162] [142:netd] fork err at pid
<7>[ 300.442187] [142:netd] fork [1645:netd]
<7>[ 300.450992] [1645:netd] exit
<5>[ 300.454158] [Power/Alarm] alarm 2 set 86441.416000000
<7>[ 300.470423] [1626:AsyncTask #2] fork err at pid
<7>[ 300.470461] [1626:AsyncTask #2] fork [1646:AsyncTask #2]
<7>[ 300.480430] [1646:AsyncTask #2] set proc[1646] name: ->[dmesg]
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IML74K
ro.build.display.id=ALPS.ICS.MP.V1.11
ro.build.version.incremental=eng.root.1344662265
ro.custom.build.version=1344662265
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.3
ro.build.date=2012年 08月 11日 星期六 13:19:27 CST
ro.build.date.utc=1344662367
ro.build.type=user
ro.build.user=root
ro.build.host=abc-desktop
ro.build.tags=test-keys
ro.product.model=e1811_v75_jbaol1_g20
ro.product.brand=alps
ro.product.name=e1811_v75_jbaol1_g20
ro.product.device=e1811_v75_jbaol1_g20
ro.product.board=e1811_v75_jbaol1_g20
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=alps
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=e1811_v75_jbaol1_g20
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=e1811_v75_jbaol1_g20-user 4.0.3 IML74K eng.root.1344662265 test-keys
ro.build.fingerprint=alps/e1811_v75_jbaol1_g20/e1811_v75_jbaol1_g20:4.0.3/IML74K/1344662265:user/test-keys
ro.build.flavor=
persist.sys.timezone=
ro.build.characteristics=default
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=ALPS.ICS.MP.V1.11
ro.mediatek.platform=MT6575
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.ICS.MP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=128m
# Encrypt phone function
ro.crypto.tmpfs_options=mode=0771,uid=1000,gid=1000
ro.crypto.fs_type=ext4
ro.crypto.fs_real_blkdev=/emmc@usrdata
ro.crypto.fs_mnt_point=/data
ro.crypto.fs_options=noauto_da_alloc
ro.crypto.fs_flags=0x00000406
# audio
ro.camera.sound.forced=0
ro.audio.silent=0
# USB Config Type
ro.sys.usb.storage.type=mtp,mass_storage
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.sf.hwrotation=0
ril.current.share_modem=2
launcherplus.allappsgrid=2d
launcher2.allappsgrid=3d_20
curlockscreen=2
ro.mediatek.gemini_support=true
drm.service.enabled=true
persist.radio.fd.counter=20
persist.radio.fd.off.counter=20
ro.config.notification_sound=Whistle.ogg
ro.config.alarm_alert=Walk_in_the_forest.ogg
ro.config.ringtone=S_Over_the_horizon.ogg
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
wlan 285284 0 - Live 0xbf1e3000 (P)
cfg80211 122425 0 - Live 0xbf1ba000
mtk_fm_priv 8909 0 - Live 0xbf1b4000 (P)
mt6620_fm_drv 111369 1 mtk_fm_priv, Live 0xbf18c000
mtk_stp_bt 39718 1 - Live 0xbf17f000
mtk_stp_gps 37190 0 - Live 0xbf172000
mtk_stp_uart 21669 1 - Live 0xbf169000 (P)
mtk_stp_wmt 343806 7 wlan,mtk_fm_priv,mt6620_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf108000 (P)
mtk_hif_sdio 18042 2 wlan,mtk_stp_wmt, Live 0xbf0ff000
devinfo 748 0 - Live 0xbf0fb000 (P)
sec 109563 0 - Live 0xbf0da000 (P)
mt6575_vcodec_kernel_driver 23817 0 - Live 0xbf0cf000 (P)
mt6575_m4u 108821 6 - Live 0xbf0ab000 (P)
ccmni 17214 0 - Live 0xbf0a2000 (P)
ccci 137954 15 ccmni, Live 0xbf075000 (P)
ccci_plat 125084 3 sec,ccmni,ccci, Live 0xbf04e000 (P)
mtk_drvb 5115 0 - Live 0xbf049000 (P)
mtklfb 14369 0 - Live 0xbf041000
pvrsrvkm 163615 79 mtklfb, Live 0xbf00d000
alps_core 2221 0 - Live 0xbf009000 (P)
aed 15834 3 - Live 0xbf000000 (P)
RAM: 512 MB (485 MB available)
System RAM: 485.000MB
mtkfb.0: 5.000MB
Flash: 4 GB (3.631 GB actual)
mmcblk0: 3.631 GB
Pantalla táctil para alps e1811_v75_jbaol1_g20
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
Batería de repuesto para alps e1811_v75_jbaol1_g20
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
Fundas para alps e1811_v75_jbaol1_g20
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
Find Similar devices | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |