1. Установить SpecDevice
2. Запустить, сформируется спецификация
3. Скопировать ссылку (подробнее...)
Основные характеристики | |
---|---|
Производитель | TCT |
Модель | ALCATEL ONE TOUCH 997D |
Версия Andriod | 4.0.4; vBF7-0; SDK15 |
Процессор | 2 cores; ARMv7 Processor rev 0 (v7l); Max: 1001,0 MHz; Min: 250,2 MHz |
Дисплей | 800 x 480; DPI: 240; Evaluated Size: 3,9" |
Сенсорный экран | Multitouch 5 points |
Графический ускоритель | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.8@2116011 |
ОЗУ | 1024 MB (998 MB available) |
Память | 10.913 GB (см. вкладку "Память") |
Связь | |
Телефон | GSM; Net: EDGE |
WiFi | wlan; IEEE 802.11 a/b/g/n; MediaTek MT6620; AP Mode |
USB Host | No |
Bluetooth | Bluetooth 4.0+HS |
GPS | Yes |
Установленные компоненты | |
Главная камера | Photo: 8.0 MP; Max: 3264x2448; Focus: auto continuous-picture continuous-video macro infinity manual fullscan; |
Доп. камера | No |
Датчики | yamaha530 3-axis Magnetic Field sensor (Aichi Steel) |
bma222 3-axis Accelerometer (The Android Open Source Project) | |
tmd2771 Proximity Sensor (Capella) | |
tmd2771 Light Sensor (Capella) | |
Вибратор | Yes |
Языки | 43; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
Аккумулятор | Technology: Li-ion; Voltage: 3778 |
FM radio | 76 to 108MHz |
Owner's comment: | Супер! |
KERNEL: Linux version 3.0.13 (android-bld@aclgcl-ubnt173) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Mon Mar 4 15:12:35 CST 2013
CODENAME: REL
Mainboard: Martell
BRAND: TCT
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: Martell_GSM
DISPLAY: Ice Cream Sandwich
FINGERPRINT: TCT/Martell/Martell_GSM:4.0.4/IMM76D/vBF7-0:user/release-keys
HARDWARE: mt6577
ID: IMM76D
TAGS: release-keys
Processor : ARMv7 Processor rev 0 (v7l)
processor : 0
BogoMIPS : 1993.93
processor : 1
BogoMIPS : 2000.48
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc09
CPU revision : 0
Hardware : MT6577
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<7>[19425.640922] (0)[24504:dmesg] exit
<7>[19425.643137] (0)[24504:dmesg] sig 17 to [24502:AsyncTask #3]
<7>[19425.661770] (0)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 21314539 > 8ms
<7>[19425.661801] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[19425.666554] (1)[2:kthreadd] fork [24506:kthreadd]
<7>[19425.672001] (1)[320:WifiStateMachin] fork [24507:WifiStateMachin]
<7>[19425.672053] (1)[24507:WifiStateMachin] set proc[24507] name: ->[loadDriverThrea]
<6>[19425.685273] (1)[WLAN] rfkill_set_block(blocked 0)
<6>[19425.685285] (1)[WLAN] Power on
<3>[19425.685301] (1)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[19425.685321] (1)[STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[19425.685376] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[19425.685392] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(GPIO112)
<3>[19425.685404] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO124)
<3>[19425.685413] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(not defined)
<3>[19425.685424] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[19425.685434] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO13)
<3>[19425.685445] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(14)
<3>[19425.685455] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO15)
<3>[19425.685466] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(18)
<3>[19425.685476] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<3>[19425.685487] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[19425.685497] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[19425.685507] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[19425.685517] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[19425.685528] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[19425.685538] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_CK(GPIO56)
<3>[19425.685548] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_WS(GPIO57)
<3>[19425.685558] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_DAT(GPIO58)
<3>[19425.685568] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(GPIO72)
<3>[19425.685579] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(GPIO122)
<3>[19425.685589] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[19425.685601] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<3>[19425.685621] (0)[WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<7>[19425.691764] (0)WQ_WARN: cpu:4, proc:kworker/u:2, dur: 26129769 > 8ms
<7>[19425.691799] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[19425.721752] (0)WQ_WARN: cpu:4, proc:kworker/u:2, dur: 24833154 > 8ms
<7>[19425.721784] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[19425.751741] (1)WQ_WARN: cpu:4, proc:kworker/u:4, dur: 25066153 > 8ms
<7>[19425.751859] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[19425.781714] (1)WQ_WARN: cpu:4, proc:kworker/u:2, dur: 25115154 > 8ms
<7>[19425.781748] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[19425.811708] (1)WQ_WARN: cpu:4, proc:kworker/u:4, dur: 25684000 > 8ms
<7>[19425.811741] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[19425.815138] (0)[273:er.ServerThread] fork [24508:er.ServerThread]
<7>[19425.824910] (0)[24508:er.ServerThread] set proc[24508] name: ->[Thread-626]
<7>[19425.827553] (0)[24508:Thread-626] exit
<7>[19425.841696] (0)WQ_WARN: cpu:4, proc:kworker/u:4, dur: 23194923 > 8ms
<7>[19425.841729] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[19425.853623] (0)[24493:Thread-907] exit
<7>[19425.871686] (0)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 25737539 > 8ms
<7>[19425.871718] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[19425.875047] (0)[24500:Thread-908] exit
<3>[19425.886216] (1)[WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[19425.886242] (1)[WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<3>[19425.886423] (1)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[19425.886438] (1)[WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[19425.886449] (1)[WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:ALL EINT not defined
<3>[19425.886460] (1)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<4>[19425.888080] (1)mtk_get_bus_freq() return 260000
<3>[19425.888319] (1)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[19425.888332] (1)Flush type = 4 Rx Queue
<3>[19425.888495] (1)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[19425.888512] (1)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[19425.888525] (1)[STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[19425.888535] (1)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[19425.888547] (1)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<6>[19425.888562] (1)[STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[19425.888574] (1)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[19425.888585] (1)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[19425.888596] (1)[STP] mtk_wcn_stp_assert:[I] set f/w assert (0)
<3>[19425.894127] (1)[WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6620)
<3>[19425.899661] (0)[WMT-IC][I]mt6620_ver_check:MT6620: read hw_ver (hw version) (0x8a11)
<7>[19425.901677] (0)WQ_WARN: cpu:4, proc:kworker/u:4, dur: 22837231 > 8ms
<7>[19425.901714] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[19425.902967] (1)[481:iatek.bluetooth] fork [24509:iatek.bluetooth]
<7>[19425.906730] (1)[24509:iatek.bluetooth] set proc[24509] name: ->[BtFtpServiceThr]
<3>[19425.907915] (0)[WMT-IC][I]mt6620_ver_check:MT6620: read fw_ver (rom version) (0x8a10)
<3>[19425.907933] (0)[WMT-IC][I]mt6620_find_wmt_ic_info:found ic info(0x8a11) by full match! index:3
<3>[19425.907949] (0)[WMT-IC][I]mt6620_ver_check:MT6620: wmt ic info: MT6620.E4 (0x8a11, WMTHWVER:3, patch_ext:_e3)
<3>[19425.907963] (0)[WMT-CORE][I]wmt_core_hw_check:chip id(0x6620) ver_check ok
<3>[19425.919614] (1)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[19425.919631] (1)[WMT-IC][I]mt6620_sw_init:WMT-CORE: change baudrate(4000000) ok
<3>[19425.921465] (1)[WMT-IC][I]mt6620_update_patch_name:full firmware patch name: /system/etc/firmware/mt6620_patch_e3_hdr.bin
<3>[19425.929777] (1)[WMT-IC][I]mt6620_patch_dwn:===========================================
<3>[19425.929797] (1)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Built Time = 20130221205149
<3>[19425.929809] (1)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[19425.929819] (1)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[19425.929830] (1)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Ph Ver = 0x0014
<3>[19425.929840] (1)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Platform = 1222
<3>[19425.929851] (1)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Content Size = 0xa480
<3>[19425.930332] (1)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Content CRC = 0x1bcb
<3>[19425.930344] (1)[WMT-IC][I]mt6620_patch_dwn:===========================================
<7>[19425.931656] (0)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 23426308 > 8ms
<7>[19425.931688] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[19425.963085] (0)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 26214154 > 8ms
<7>[19425.963118] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[19425.991629] (0)WQ_WARN: cpu:4, proc:kworker/u:2, dur: 24785846 > 8ms
<7>[19425.991660] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[19426.021611] (0)WQ_WARN: cpu:4, proc:kworker/u:4, dur: 26572692 > 8ms
<7>[19426.021645] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[19426.051595] (0)WQ_WARN: cpu:4, proc:kworker/u:2, dur: 26744923 > 8ms
<7>[19426.051669] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[19426.082886] (1)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 28094154 > 8ms
<7>[19426.082952] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[19426.112647] (1)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 26551000 > 8ms
<7>[19426.112679] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[19426.143612] (1)WQ_WARN: cpu:4, proc:kworker/u:2, dur: 27744307 > 8ms
<7>[19426.143672] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[19426.172964] (1)WQ_WARN: cpu:4, proc:kworker/u:2, dur: 25542308 > 8ms
<7>[19426.173061] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[19426.202549] (1)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 17547000 > 8ms
<7>[19426.202580] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[19426.232711] (0)WQ_WARN: cpu:4, proc:kworker/u:2, dur: 25702924 > 8ms
<7>[19426.232741] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<3>[19426.248511] (0)[WMT-IC][I]mt6620_patch_dwn:wmt_core: patch dwn:0 frag(43, 112) ok
<3>[19426.248626] (0)[WMT-IC][I]mt6620_sw_init:Not to check the patch validity
<3>[19426.249091] (0)[WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf142f48)
<3>[19426.253808] (0)[WMT-IC][I]mt6620_sw_init:init_coex ok
<6>[19426.254298] (0)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[19426.254324] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[19426.254348] (0)[STP] mtk_wcn_stp_assert:[I] set f/w assert (0)
<3>[19426.254366] (0)[WMT-IC][I]mt6620_sw_init:enable host STP-UART-FULL mode
<7>[19426.261492] (0)WQ_WARN: cpu:4, proc:kworker/u:4, dur: 23959385 > 8ms
<7>[19426.261539] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<3>[19426.268488] (1)[WMT-IC][I]mt6620_sw_init:set fm mode (2) ok
<6>[19426.268541] (1)[STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[19426.268587] (1)[STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[19426.268626] (1)mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[19426.268659] (1)board_sdio_ctrl force off before on
<6>[19426.268687] (1)mtk_wcn_cmb_sdio_off (3)
<5>[19426.268838] (1)[Power/clkmgr] [freq_meter] data = 15494, freq = 196 MHz
<5>[19426.268995] (1)[Power/clkmgr] [freq_meter] data = 15495, freq = 196 MHz
<6>[19426.269089] (1)mtk_wcn_cmb_sdio_on (3)
<5>[19426.269237] (1)[Power/clkmgr] [freq_meter] data = 15494, freq = 196 MHz
<3>[19426.269306] (1)msdc3 -> USR Resume <- msdc_pm() : L<1674> PID
<3>[19426.286657] (0)msdc3 -> ================ <- msdc_set_mclk() : L<944> PID
<3>[19426.286748] (0)msdc3 -> !!! Set<400KHz> Source<197000KHz> -> sclk<397KHz> DDR<0> mode<0> div<124> <- msdc_set_mclk() : L<946> PID
<3>[19426.286832] (0)msdc3 -> ================ <- msdc_set_mclk() : L<947> PID
<3>[19426.290971] (0)**Cannot find HWE module**
<7>[19426.291634] (0)WQ_WARN: cpu:4, proc:kworker/u:4, dur: 25981307 > 8ms
<7>[19426.291747] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<3>[19426.312620] (0)msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1742> PID
<7>[19426.321573] (0)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 23587076 > 8ms
<7>[19426.321720] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<3>[19426.347863] (0)msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<4054> PID
<3>[19426.347951] (0)msdc3 -> ================ <- msdc_set_mclk() : L<944> PID
<3>[19426.348018] (0)msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<946> PID
<3>[19426.348080] (0)msdc3 -> ================ <- msdc_set_mclk() : L<947> PID
<7>[19426.351530] (0)WQ_WARN: cpu:4, proc:kworker/u:4, dur: 25808000 > 8ms
<7>[19426.351649] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<6>[19426.351846] (0)mmc2: new high speed SDIO card at address 0001
<6>[19426.355153] (1)[WMT-DFT][I]hif_sdio_probe:start!
<6>[19426.355221] (1)[WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x20a) num(0x1)
<6>[19426.355268] (1)[WMT-DFT][I]hif_sdio_probe:card->info[0]: MediaTek MT6620 Wireless Combo Chip
<6>[19426.355308] (1)[WMT-DFT][I]hif_sdio_probe:card->info[1]:
<6>[19426.355341] (1)[WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[19426.361541] (1)[WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(524288)
<7>[19426.368407] (1)WQ_WARN: cpu:4, proc:kworker/u:2, dur: 94341308 > 8ms
<7>[19426.368469] (1)work: mmc_rescan+0x0/0x324
<7>[19426.381330] (0)WQ_WARN: cpu:4, proc:kworker/u:4, dur: 22494230 > 8ms
<7>[19426.381361] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[19426.411307] (0)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 26143462 > 8ms
<7>[19426.411337] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<6>[19426.426203] (1)[WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[19426.426357] (1)[2:kthreadd] fork [24510:kthreadd]
<6>[19426.426393] (1)[WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<5>[19426.426451] (1)[wlan] net_device prDev(0xd82a3000) allocated
<4>[19426.426764] (1)[RT_MONITOR]WARNNING [24510:ksdioirqd/mmc2] SET NOT ALLOW RT Prio [1] for proc [24510:ksdioirqd/mmc2]
<7>[19426.441445] (0)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 25695462 > 8ms
<7>[19426.441545] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<5>[19426.444317] (1)[wlan] Open FW image: WIFI_RAM_CODE done
<5>[19426.454817] (1)[wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[19426.455017] (1)[wlan] Virtual Address = e6e48000 for COMMON MGMT MEMORY POOL.
<5>[19426.455074] (1)[wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[19426.455171] (1)[wlan] Virtual Address = e6e4a000 for SW_RFB_T.
<5>[19426.455221] (1)[wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[19426.455308] (1)[wlan] Virtual Address = e6e4e000 for MSDU_INFO_T.
<6>[19426.455362] (1)[wlan] wlanAdapterStart(): Acquiring LP-OWN
<7>[19426.472332] (0)WQ_WARN: cpu:4, proc:kworker/u:4, dur: 25697923 > 8ms
<7>[19426.472363] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<6>[19426.476674] (0)[wlan] Chip ID: 0x6620
<6>[19426.476691] (0)[wlan] Revision ID: 0x1
<7>[19426.501239] (0)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 24847770 > 8ms
<7>[19426.501274] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[19426.531188] (0)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 24949000 > 8ms
<7>[19426.531218] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[19426.561152] (0)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 25615385 > 8ms
<7>[19426.561182] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[19426.591113] (0)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 26247616 > 8ms
<7>[19426.591143] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[19426.621091] (0)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 26267539 > 8ms
<7>[19426.621120] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[19426.651051] (0)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 25801385 > 8ms
<7>[19426.651082] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[19426.684771] (1)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 29992154 > 8ms
<7>[19426.684810] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[19426.710985] (1)WQ_WARN: cpu:4, proc:kworker/u:4, dur: 21144846 > 8ms
<7>[19426.711016] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[19426.726240] (0)WQ_WARN: cpu:0, proc:kworker/0:1, dur: 310030692 > 8ms
<7>[19426.726261] (0)work: thermal_zone_device_check+0x0/0x18
<7>[19426.740952] (1)WQ_WARN: cpu:4, proc:kworker/u:4, dur: 26157538 > 8ms
<7>[19426.740980] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[19426.770954] (0)WQ_WARN: cpu:4, proc:kworker/u:4, dur: 26507307 > 8ms
<7>[19426.770987] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[19426.800940] (1)WQ_WARN: cpu:4, proc:kworker/u:2, dur: 26420846 > 8ms
<7>[19426.800970] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[19426.830910] (1)WQ_WARN: cpu:4, proc:kworker/u:2, dur: 26566923 > 8ms
<7>[19426.830942] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[19426.860857] (1)WQ_WARN: cpu:4, proc:kworker/u:2, dur: 26439538 > 8ms
<7>[19426.860890] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[19426.890841] (0)WQ_WARN: cpu:4, proc:kworker/u:4, dur: 26503077 > 8ms
<7>[19426.890872] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[19426.920776] (0)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 26462615 > 8ms
<7>[19426.920806] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[19426.950735] (1)WQ_WARN: cpu:4, proc:kworker/u:2, dur: 26751385 > 8ms
<7>[19426.950813] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[19426.980769] (0)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 26610923 > 8ms
<7>[19426.980805] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[19427.010701] (0)WQ_WARN: cpu:4, proc:kworker/u:2, dur: 24728077 > 8ms
<7>[19427.010731] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[19427.040677] (1)WQ_WARN: cpu:4, proc:kworker/u:2, dur: 21095231 > 8ms
<7>[19427.040708] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[19427.070644] (1)WQ_WARN: cpu:4, proc:kworker/u:2, dur: 17603769 > 8ms
<7>[19427.070674] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[19427.100646] (0)WQ_WARN: cpu:4, proc:kworker/u:2, dur: 13928923 > 8ms
<7>[19427.100677] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[19427.130588] (1)WQ_WARN: cpu:4, proc:kworker/u:2, dur: 9930923 > 8ms
<7>[19427.130619] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<6>[19427.151110] (0)[wlan] wlanAdapterStart(): Waiting for Ready bit..
<3>[19427.420398] (0)**Cannot find HWE module**
<6>[19427.526395] (0)[wlan] Ready bit asserted
<5>[19427.557348] (0)[wlan] [wifi] wlan%d netif_carrier_off
<6>[19427.557415] (0)[wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[19427.557531] (0)[wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[19427.557896] (0)[wlan] Domain: map=0, idx=0, code=0x4555
<7>[19427.558951] (0)[2:kthreadd] fork [24511:kthreadd]
<5>[19427.559085] (0)[wlan] tx_thread starts running...
<6>[19427.575042] (0)[WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(20a) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[19427.575060] (0)[WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[19427.575082] (0)[WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 coredump:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[19427.575149] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<3>[19427.575194] (0)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<4>[19427.575473] (0)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<7>[19427.577713] (1)[24507:loadDriverThrea] exit
<7>[19427.600871] (0)[16175:kworker/u:2] fork [24512:kworker/u:2]
<7>[19427.602311] (1)[24512:kworker/u:2] fork [24513:kworker/u:2]
<7>[19427.602388] (1)[24513:kworker/u:2] exit
<7>[19427.602528] (1)[24513:kworker/u:2] sig 17 to [24512:kworker/u:2]
<7>[19427.603304] (1)[24512:kworker/u:2] exit
<6>[19427.605487] (0)[RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[19427.605534] (0)ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[19427.617175] (0)WQ_WARN: cpu:0, proc:kworker/0:1, dur: 13126231 > 8ms
<7>[19427.617248] (0)work: wlanSetMulticastListWorkQueue+0x0/0x1f4 [wlan]
<5>[19427.623117] (0)init: starting `wpa_supplicant`
<7>[19427.623291] (0)[1:init] fork [24514:init]
<7>[19427.624360] (0)[320:WifiStateMachin] fork [24515:WifiStateMachin]
<7>[19427.624404] (1)[24515:WifiStateMachin] set proc[24515] name: ->[WifiMonitor]
<7>[19427.627312] (1)[24514:init] set proc[24514] name: ->[logwrapper]
<7>[19427.629341] (1)[24514:logwrapper] fork [24516:logwrapper]
<7>[19427.638908] (0)[24516:logwrapper] set proc[24516] name: ->[wpa_supplicant]
<5>[19427.697057] (0)[wlan] N=0 closed
<5>[19427.697122] (0)[wlan] EVENT-ROAMING ABORT: Current Time = 19106350
<5>[19427.697166] (0)[wlan] [13] TRANSITION: [0] -> [0]
<6>[19427.697982] (1)[wlan] NAF=0,0,0
<6>[19427.697999] (1)[wlan] NAF=0,0,0
<7>[19427.729692] (0)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 21909846 > 8ms
<7>[19427.729722] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[19427.759849] (1)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 18400307 > 8ms
<7>[19427.759938] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[19427.789678] (0)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 11133846 > 8ms
<7>[19427.789709] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[19427.819648] (0)WQ_WARN: cpu:4, proc:kworker/u:2, dur: 8229231 > 8ms
<7>[19427.819678] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<5>[19427.948265] (0)[wlan] [13] TRANSITION: [0] -> [2]
<5>[19427.990724] (1)[Power/Alarm] alarm 0 set 1383162615.742000000
<7>[19428.036223] (0)WQ_WARN: cpu:0, proc:kworker/0:3, dur: 310021000 > 8ms
<7>[19428.036245] (0)work: thermal_zone_device_check+0x0/0x18
<3>[19428.099141] (0)**Cannot find HWE module**
<5>[19428.268897] (1)[wlan] [13] TRANSITION: [2] -> [0]
<6>[19428.274371] (1)[wlan] NAF=0,0,0
<7>[19428.364816] (0)[24502:AsyncTask #3] fork [24517:AsyncTask #3]
<7>[19428.375239] (0)[24517:AsyncTask #3] set proc[24517] name: ->[dmesg]
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IMM76D
ro.build.display.id=Ice Cream Sandwich
ro.build.version.incremental=vBF7-0
ro.custom.build.version=vBF7-0
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=Mon Mar 4 19:48:13 CST 2013
ro.build.date.utc=1362397693
ro.build.type=user
ro.build.user=zxliu
ro.build.host=aclgcl-ubnt242
ro.build.tags=release-keys
ro.product.model=ALCATEL ONE TOUCH 997D
ro.product.brand=TCT
ro.product.name=Martell
ro.product.device=Martell_GSM
ro.product.board=Martell
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=TCT
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=Martell_GSM
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=Martell-user 4.0.4 IMM76D vBF7-0 release-keys
ro.build.fingerprint=TCT/Martell/Martell_GSM:4.0.4/IMM76D/vBF7-0:user/release-keys
ro.build.flavor=
ro.build.characteristics=default
# end build properties
ro.product.display.model=ALCATEL ONE TOUCH 997D
#
#jrd sys properties
#
A51.supported.for.perso=true
persist.radio.fd.counter=5
persist.radio.fd.off.counter=5
A52.supported.for.perso=false
gsm.stk.perso.app_title=Mis Servicios
A53.supported.for.perso=true
Modem.FD.supported.for.perso=true
Def.shuttersound.enable=true
Def.shuttersound.menu.hide=false
AMRWB.GSM.supported.for.perso=false
AMRWB.UMTS.supported.for.perso=true
ro.def.screen.brightness=48
ro.def.screen.brightness.mode=auto
ro.def.software.version=010 01
ro.com.android.dataroaming=false
ro.com.android.dataroaming2=false
ro.def.auto-rotation=false
qemu.hw.mainkeys=0
ro.com.google.clientidbase=android-alcatel
ro.com.google.clientidbase.am=android-alcatel
ro.com.google.clientidbase.ms=android-alcatel
ro.com.google.clientidbase.gmm=android-alcatel
ro.com.google.clientidbase.yt=android-alcatel
ro.setupwizard.mode=DISABLED
ro.config.alarm_alert=Sober.ogg
ro.config.ringtone=Buoy.ogg
ro.config.notification_sound=Vintage.ogg
persist.adb.notify=1
persist.service.adb.enable=1
gsm.version.baseband=6180
ro.power.key.default.behavior=1
ro.update.cfi.for.all=false
ro.music.lyrics.enable=1
ro.product.locale.language=uk
ro.product.locale.region=UA
ro_config_phnum_significant_len=7
ro.mobile_data_enable=1
def_show_on_map_hide=0
ro.bluetooth.default.name=
def.dualmic.display.enabled=false
def.dualmic.enabled=false
ro.srs.audio.effect.enable=true
ro.audio.parameters.config=0
ro.ringer_volume_general=5
ro.ringer_volume_meeting=1
ro.ringer_volume_outdoor=7
ro.notification_volume_general=5
ro.notification_volume_meeting=1
ro.notification_volume_outdoor=7
ro.alarm_volume_general=5
ro.alarm_volume_meeting=1
ro.alarm_volume_outdoor=7
ro.vibration_general=true
ro.vibration_silent=true
ro.vibration_meeting=true
ro.vibration_outdoor=true
ro.screen_touch_tone_general=true
ro.screen_touch_tone_meeting=false
ro.screen_touch_tone_outdoor=true
ro.sound_effect_general=true
ro.sound_effect_meeting=false
ro.sound_effect_outdoor=true
ro.haptic_feedback_general=true
ro.haptic_feedback_silent=false
ro.haptic_feedback_meeting=false
ro.haptic_feedback_outdoor=true
ro.lock_screen_general=true
ro.lock_screen_meeting=false
ro.lock_screen_outdoor=true
persist.sys.sd.defaultpath=/mnt/sdcard
ro.def.software.svn=01001
ro.config.message_ringtone=Drop.ogg
def.default.song.encode=false
ro_com_Guatemala_SP_call=0
Modem.Manufacture.for.perso=ALCATEL
Modem.Model.for.perso=OT 997D
ro.drm.enable=true
ro.oma.cp.authen_mandatory=true
ro.config.switch_on=bootaudio.mp3
ro.config.switch_off=shutaudio.mp3
ro.config.key_switch_on_off=1
persist.sys.timezone=Europe/Amsterdam
def_search_engine=google
def_search_website=http://www.baidu.com/s?wd=
ecc_list_for_peso=
ro_default_emergency_number=
ro.separate_ring_notification=true
ro.sendemptysms.enable=true
ro.x.wap.profile=http://www-ccpp.tcl-ta.com/files/ALCATEL_one_touch_997D.xml
ro_headset_sound_mode=1
ro_voice_ringtone_uri_general=Buoy.ogg
ro_voice_ringtone_uri_meeting=Buoy.ogg
ro_voice_ringtone_uri_outdoor=Buoy.ogg
# begin mediatek build properties
ro.mediatek.version.release=ALPS.ICS2.6577.SP.V1.20120605
ro.mediatek.platform=MT6577
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.ICS2.6577.SP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=128m
# Encrypt phone function
ro.crypto.tmpfs_options=mode=0771,uid=1000,gid=1000
ro.crypto.fs_type=ext4
ro.crypto.fs_real_blkdev=/emmc@usrdata
ro.crypto.fs_mnt_point=/data
ro.crypto.fs_options=noauto_da_alloc
ro.crypto.fs_flags=0x00000406
# USB MTP WHQL
ro.sys.usb.mtp.whql.enable=0
# Power off opt in IPO
sys.ipo.pwrdncap=2
ro.sys.usb.storage.type=mtp,mass_storage
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.sf.hwrotation=0
ril.current.share_modem=2
launcherplus.allappsgrid=2d
launcher2.allappsgrid=3d_20
curlockscreen=2
ro.mediatek.gemini_support=true
drm.service.enabled=true
fmradio.driver.enable=1
dalvik.vm.mtk-stack-trace-file=/data/anr/mtk_traces.txt
ro.config.notification_sound=Shimmer.ogg
ro.config.alarm_alert=Sober.ogg
ro.config.ringtone=Buoy.ogg
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
wlan 286092 0 - Live 0xbf1fd000 (P)
cfg80211 121452 0 - Live 0xbf1d4000
mtk_fm_priv 8917 0 - Live 0xbf1ce000 (P)
mt6620_fm_drv 112549 1 mtk_fm_priv, Live 0xbf1a6000
mtk_stp_bt 39862 0 - Live 0xbf199000
mtk_stp_gps 37318 0 - Live 0xbf18c000
mtk_stp_uart 21601 0 - Live 0xbf183000 (P)
mtk_stp_wmt 375916 7 wlan,mtk_fm_priv,mt6620_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf119000 (P)
mtk_hif_sdio 18777 2 wlan,mtk_stp_wmt, Live 0xbf110000
devinfo 840 0 - Live 0xbf10c000 (P)
devapc 4557 0 - Live 0xbf107000 (P)
sec 90381 0 - Live 0xbf0ea000 (P)
vcodec_kernel_driver 28294 2 - Live 0xbf0de000 (P)
m4u 112944 8 - Live 0xbf0b9000 (P)
ccmni 17062 0 - Live 0xbf0b0000 (P)
ccci 116968 15 ccmni, Live 0xbf088000 (P)
ccci_plat 126142 2 ccmni,ccci, Live 0xbf060000 (P)
mtk_drvb_77 6085 0 - Live 0xbf05b000 (P)
mtklfb 23534 0 - Live 0xbf051000
pvrsrvkm 233713 123 mtklfb, Live 0xbf009000
aed 16252 3 - Live 0xbf000000 (P)
RAM: 1024 MB (998 MB available)
System RAM: 998.000MB
mtkfb.0: 4.000MB
Flash: 10.913 GB
mmcblk0: 3.566 GB
mmcblk1: 7.347 GB
Тачскрин для TCT ALCATEL ONE TOUCH 997D
$3 Two Flutes Woodworking Gang Drill Bits Blind Hole TCT Drilling Head 70mm 57mm for Multi Rows Boring Locator Machine 10mm 1PCS
$5.66 TCT Through Hole Drill Bit Woodworking Drilling Bit CNC Router 3mm 4mm Hole Making Boring 70mm Length Shank 10mm
$195.74 5PCS Good Quality Carbide TCT Dowel Drill Bits CNC Router Tools For Woodworking Machinery Total Length 70mm
$3.57 1 pc 5A Carbide Tip TCT Drill Bit Hole Saw 12-150mm Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$3.71 12-300mm TCT Hole Saw Tungsten Carbide Tipped Core Drill Bit Cobalt Cutter Tools For Stainless Steel Plate Iron Metal PVC Opener
$3.32 1pc 12-160mm TCT Carbide Hole Saw Drill Bit Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$9.16 60 90 Degree Countersink Drill with Brazing Carbide TCT straight handle Chamfering Milling Tool YG8Welded tungsten steel chamfer
$2.18 XCAN Drill Bit TCT/HSS Annular Cutter Pilot Pin 6.35mm 8mm Shank 77/90/102/127/160mm Long Pilot Pin Steel Plate Drill Tool
$3.13 1 pc 5A Carbide Tip TCT Drill Bit Hole Saw 12-150mm Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$29 1Pc 15-100mm TCT Hole Saw Carbide Tip Core Drill Bit Cutter Drilling crown for metal Stainless Steel Alloy
$34.67 BAILEY 1PC TCT Dowel Drill Bits Woodworking Drilling Bit CNC Router Bit 5-8mm Hole Making Boring 70/57mm Length Hard Metal Drill
$36.8 12-100mm TCT Hole Saw Tungsten Carbide Tipped Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$3.86 Free Shipping 2PCS 3-10 Diameter 85-110mm Length TCT Tip SDS Plus Round Shank 4 Hollow Hammer Drill Bits For Home Masonry Work
$2.44 1/4" Shank TCT Straight End Mill Router Bits 1.6mm-6mm Woodworking Carving 2 Flute Milling Cutter Wood Engraving Carbide CNC Bit
$154.58 XCAN TCT Hollow Drill Bit TiCN Coating 12-32mm Weldon Shank Carbide Annular Cutter Hole Saw Cutter Metal Hole Drill Bit
$4.37 TCT Annular Cutter Pilot Pin Center Rod Hollow Drill Steel Plate Drill HSS Annular Cutter Center Positioning Rod Ejector Pin
$28.49 XCAN Drill Bit Carbide Cutter 12mm 32mm Diameter 35mm Length Weldon Shank TCT Hollow Drill Annular Cutter for Metal Drilling
$6.14 12.7mm 3 Flutes TCT Trimming Straight Bit Milling Cutter For MDF Plywood Chipboard Hard Wood Drill Engraving Router Bit Endmill
$39.14 BAILEY 1PC 70mm TCT Through Hole Drill Bits Woodworking Tool CNC Router Hole Making Boring Drill Head Power Tools Accessories
$119.56 5PCS High Quality 57/70mm Wood Carbide Crown TCT Brad-point Dowel Drill Bits CNC Router For Woodworking Tools Machinery
Новый аккумулятор для TCT ALCATEL ONE TOUCH 997D
$195.74 5PCS Good Quality Carbide TCT Dowel Drill Bits CNC Router Tools For Woodworking Machinery Total Length 70mm
$3 Two Flutes Woodworking Gang Drill Bits Blind Hole TCT Drilling Head 70mm 57mm for Multi Rows Boring Locator Machine 10mm 1PCS
$5.66 TCT Through Hole Drill Bit Woodworking Drilling Bit CNC Router 3mm 4mm Hole Making Boring 70mm Length Shank 10mm
$3.57 1 pc 5A Carbide Tip TCT Drill Bit Hole Saw 12-150mm Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$9.16 60 90 Degree Countersink Drill with Brazing Carbide TCT straight handle Chamfering Milling Tool YG8Welded tungsten steel chamfer
$3.71 12-300mm TCT Hole Saw Tungsten Carbide Tipped Core Drill Bit Cobalt Cutter Tools For Stainless Steel Plate Iron Metal PVC Opener
$3.32 1pc 12-160mm TCT Carbide Hole Saw Drill Bit Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$2.18 XCAN Drill Bit TCT/HSS Annular Cutter Pilot Pin 6.35mm 8mm Shank 77/90/102/127/160mm Long Pilot Pin Steel Plate Drill Tool
$29 1Pc 15-100mm TCT Hole Saw Carbide Tip Core Drill Bit Cutter Drilling crown for metal Stainless Steel Alloy
$3.13 1 pc 5A Carbide Tip TCT Drill Bit Hole Saw 12-150mm Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$36.8 12-100mm TCT Hole Saw Tungsten Carbide Tipped Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$34.67 BAILEY 1PC TCT Dowel Drill Bits Woodworking Drilling Bit CNC Router Bit 5-8mm Hole Making Boring 70/57mm Length Hard Metal Drill
$3.86 Free Shipping 2PCS 3-10 Diameter 85-110mm Length TCT Tip SDS Plus Round Shank 4 Hollow Hammer Drill Bits For Home Masonry Work
$154.58 XCAN TCT Hollow Drill Bit TiCN Coating 12-32mm Weldon Shank Carbide Annular Cutter Hole Saw Cutter Metal Hole Drill Bit
$2.44 1/4" Shank TCT Straight End Mill Router Bits 1.6mm-6mm Woodworking Carving 2 Flute Milling Cutter Wood Engraving Carbide CNC Bit
$119.56 5PCS High Quality 57/70mm Wood Carbide Crown TCT Brad-point Dowel Drill Bits CNC Router For Woodworking Tools Machinery
$4.37 TCT Annular Cutter Pilot Pin Center Rod Hollow Drill Steel Plate Drill HSS Annular Cutter Center Positioning Rod Ejector Pin
$28.49 XCAN Drill Bit Carbide Cutter 12mm 32mm Diameter 35mm Length Weldon Shank TCT Hollow Drill Annular Cutter for Metal Drilling
$39.14 BAILEY 1PC 70mm TCT Through Hole Drill Bits Woodworking Tool CNC Router Hole Making Boring Drill Head Power Tools Accessories
$6.14 12.7mm 3 Flutes TCT Trimming Straight Bit Milling Cutter For MDF Plywood Chipboard Hard Wood Drill Engraving Router Bit Endmill
Чехлы для TCT ALCATEL ONE TOUCH 997D
$3 Two Flutes Woodworking Gang Drill Bits Blind Hole TCT Drilling Head 70mm 57mm for Multi Rows Boring Locator Machine 10mm 1PCS
$5.66 TCT Through Hole Drill Bit Woodworking Drilling Bit CNC Router 3mm 4mm Hole Making Boring 70mm Length Shank 10mm
$195.74 5PCS Good Quality Carbide TCT Dowel Drill Bits CNC Router Tools For Woodworking Machinery Total Length 70mm
$3.57 1 pc 5A Carbide Tip TCT Drill Bit Hole Saw 12-150mm Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$3.32 1pc 12-160mm TCT Carbide Hole Saw Drill Bit Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$3.71 12-300mm TCT Hole Saw Tungsten Carbide Tipped Core Drill Bit Cobalt Cutter Tools For Stainless Steel Plate Iron Metal PVC Opener
$9.16 60 90 Degree Countersink Drill with Brazing Carbide TCT straight handle Chamfering Milling Tool YG8Welded tungsten steel chamfer
$3.13 1 pc 5A Carbide Tip TCT Drill Bit Hole Saw 12-150mm Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$29 1Pc 15-100mm TCT Hole Saw Carbide Tip Core Drill Bit Cutter Drilling crown for metal Stainless Steel Alloy
$2.18 XCAN Drill Bit TCT/HSS Annular Cutter Pilot Pin 6.35mm 8mm Shank 77/90/102/127/160mm Long Pilot Pin Steel Plate Drill Tool
$34.67 BAILEY 1PC TCT Dowel Drill Bits Woodworking Drilling Bit CNC Router Bit 5-8mm Hole Making Boring 70/57mm Length Hard Metal Drill
$36.8 12-100mm TCT Hole Saw Tungsten Carbide Tipped Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$3.86 Free Shipping 2PCS 3-10 Diameter 85-110mm Length TCT Tip SDS Plus Round Shank 4 Hollow Hammer Drill Bits For Home Masonry Work
$28.49 XCAN Drill Bit Carbide Cutter 12mm 32mm Diameter 35mm Length Weldon Shank TCT Hollow Drill Annular Cutter for Metal Drilling
$6.14 12.7mm 3 Flutes TCT Trimming Straight Bit Milling Cutter For MDF Plywood Chipboard Hard Wood Drill Engraving Router Bit Endmill
$39.14 BAILEY 1PC 70mm TCT Through Hole Drill Bits Woodworking Tool CNC Router Hole Making Boring Drill Head Power Tools Accessories
$4.37 TCT Annular Cutter Pilot Pin Center Rod Hollow Drill Steel Plate Drill HSS Annular Cutter Center Positioning Rod Ejector Pin
$119.56 5PCS High Quality 57/70mm Wood Carbide Crown TCT Brad-point Dowel Drill Bits CNC Router For Woodworking Tools Machinery
$2.44 1/4" Shank TCT Straight End Mill Router Bits 1.6mm-6mm Woodworking Carving 2 Flute Milling Cutter Wood Engraving Carbide CNC Bit
$154.58 XCAN TCT Hollow Drill Bit TiCN Coating 12-32mm Weldon Shank Carbide Annular Cutter Hole Saw Cutter Metal Hole Drill Bit
Найти похожие устройства | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |