Explay Informer 706 3G Specification

3 Steps to publish Your specification here:

1. Install SpecDevice
2. Run and decode your specs
3. Get your link (read more...)

General
OS details
CPU info
GPU extensions
WiFi kernel messages
build.prop
Modules
Memory map

General Specifications
Manufacturer	Explay
Model	Informer 706 3G
Firmware	4.0.4; 20120808; SDK15
CPU	1 core; ARMv7 Processor rev 2 (v7l) exDroid; Max: 1008.0 MHz; Min: 60.0 MHz
Display	800 x 480; DPI: 120; Evaluated Size: 7.8"
Touch screen	Multitouch 5 points
GPU	Mali-400 MP; ARM; OpenGL ES-CM 1.1; OpenGL ES 2.0
RAM	448 MB
Flash	4 GB Build-in (3.696 GB actual)
Communications
Phone	None; Net: GPRS
WiFi	8192cu; IEEE 802.11 b/g/n; RealtekRTL8188/92; AP Mode
USB Host	Yes
Bluetooth	No
GPS	Yes
Advanced Features
Front camera	Photo: 1.9 MP; Max: 1600x1200; Video: 0.3 MP; Max: 640x480; Focus: auto; No flash
Back camera	Photo: 0.3 MP; Max size: 640x480; Video: 0.3 MP; Max: 640x480; Focus: auto; No flash
Sensors	MMA 3-axis Accelerometer (Freescale Semiconductor Inc.); range: 0...19.613; resolution: 0.467 (2.381%); power: 0.3mA;
	ISL29011 Proximity sensor (Sharp); range: 0...5; resolution: 5 (100%); power: 0.75mA;
Vibrator	Yes
Supported languages	40; Arabic; Bulgarian; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Vietnamese; Chinese
Battery	Technology: LiFe; Voltage: 3796
SD Version:	1.1 7

KERNEL: Linux version 3.0.8 (usermdy@ubuntu) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #573 PREEMPT Thu Aug 9 09:09:35 CST 2012
CODENAME: REL
Mainboard: crane
BRAND: hn
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: crane-hn
DISPLAY: crane_hn-eng 4.0.4 IMM76D 20120808 dev-keys
FINGERPRINT: hn/crane_hn/crane-hn:4.0.4/IMM76D/20120808:eng/dev-keys
HARDWARE: sun4i
ID: IMM76D
TAGS: dev-keys

Processor : ARMv7 Processor rev 2 (v7l)
BogoMIPS : 1001.88
Features : swp half thumb fastmult vfp edsp neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc08
CPU revision : 2
Hardware : sun4i
Revision : 0000
Serial : 0581d52e57564848807287541623678f

GL_OES_texture_npot
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_standard_derivatives
GL_OES_EGL_image
GL_OES_depth24
GL_ARM_rgba8
GL_ARM_mali_shader_binary
GL_OES_depth_texture
GL_OES_packed_depth_stencil
GL_EXT_texture_format_BGRA8888
GL_EXT_blend_minmax
GL_OES_EGL_image_external
GL_OES_EGL_sync
GL_OES_rgb8_rgba8
GL_EXT_multisampled_render_to_texture
GL_EXT_discard_framebuffer

<7>[ 1541.055151] UMP<2>: Session closed
<7>[ 1541.121342] -r871xu_dev_remove, done
<7>[ 1541.121478] -rtw_drv_halt
<7>[ 1541.121485] sw_usb_disable_hcd: usbc_num = 2
<7>[ 1541.121493] [sw-ehci2]: sw_usb_disable_ehci
<7>[ 1541.121506] [sw-ehci2]: remove, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0xc08b017c
<6>[ 1541.121518] sw-ehci sw-ehci.2: remove, state 1
<6>[ 1541.121547] usb usb4: USB disconnect, device number 1
<6>[ 1541.121556] usb 4-1: USB disconnect, device number 2
<6>[ 1541.141726] sw-ehci sw-ehci.2: USB bus 4 deregistered
<7>[ 1541.141752] [sw-ehci2]: close clock
<7>[ 1541.141785] [sw-ohci2]: sw_usb_disable_ohci
<7>[ 1541.141796] [sw-ohci2]: remove, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc08b0290
<6>[ 1541.141808] sw-ohci sw-ohci.2: remove, state 4
<6>[ 1541.141831] usb usb5: USB disconnect, device number 1
<6>[ 1541.142268] sw-ohci sw-ohci.2: USB bus 5 deregistered
<7>[ 1541.142287] [sw-ohci2]: Set USB Power OFF
<7>[ 1541.142296] [sw-ohci2]: close clock
<7>[ 1541.146661] rmmod 8192cu
<7>[ 1541.784746] ========================================
<7>[ 1541.784756] Enter wireless driver...
<7>[ 1541.784762] Author:Joe Wang Copyright by Hana!
<7>[ 1541.784768] ========================================
<7>[ 1543.148688] sw_usb_enable_hcd: usbc_num = 2
<7>[ 1543.173589] [sw-ehci2]: sw_usb_enable_ehci
<7>[ 1543.173615] [sw-ehci2]: probe, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0xc08b017c
<7>[ 1543.173635] [sw-ehci2]: open clock
<7>[ 1543.193650] [sw-ehci2]: Set USB Power ON
<6>[ 1543.193667] sw-ehci sw-ehci.2: SW USB2.0 `Enhanced` Host Controller (EHCI) Driver
<6>[ 1543.206194] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
<6>[ 1543.213742] sw-ehci sw-ehci.2: irq 40, io mem 0xf1c1c000
<6>[ 1543.230055] sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
<7>[ 1543.240356] ehci_irq: port change detect
<6>[ 1543.244667] hub 4-0:1.0: USB hub found
<6>[ 1543.249453] hub 4-0:1.0: 1 port detected
<7>[ 1543.250892] [sw-ohci2]: sw_usb_enable_ohci
<7>[ 1543.250908] [sw-ohci2]: probe, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc08b0290
<7>[ 1543.250921] [sw-ohci2]: open clock
<6>[ 1543.282701] sw-ohci sw-ohci.2: SW USB2.0 `Open` Host Controller (OHCI) Driver
<6>[ 1543.282754] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 5
<6>[ 1543.282812] sw-ohci sw-ohci.2: irq 65, io mem 0xf1c1c400
<6>[ 1543.353450] hub 5-0:1.0: USB hub found
<6>[ 1543.353484] hub 5-0:1.0: 1 port detected
<7>[ 1543.354386] rtw driver version=v3.4.2_3727.20120404
<7>[ 1543.354395] Build at: Jul 25 2012 18:14:36
<7>[ 1543.354402] ##########rtw_suspend_lock_init ###########
<6>[ 1543.355151] usbcore: registered new interface driver rtl8192cu
<7>[ 1543.372673] insmod /system/vendor/modules/8192cu.ko ret=0
<6>[ 1543.560117] usb 4-1: new high speed USB device number 2 using sw-ehci
<7>[ 1543.716833] usb id:0xbda/0x8176
<7>[ 1543.717184] register rtw_netdev_ops to netdev_ops
<7>[ 1543.717200] rtw_wdev_alloc
<7>[ 1543.717510] CHIP TYPE: RTL8188C_8192C
<7>[ 1543.717528]
<7>[ 1543.717531] usb_endpoint_descriptor(0):
<7>[ 1543.717538] bLength=7
<7>[ 1543.717544] bDescriptorType=5
<7>[ 1543.717550] bEndpointAddress=81
<7>[ 1543.717557] wMaxPacketSize=200
<7>[ 1543.717563] bInterval=0
<7>[ 1543.717570] RT_usb_endpoint_is_bulk_in = 1
<7>[ 1543.717577]
<7>[ 1543.717580] usb_endpoint_descriptor(1):
<7>[ 1543.717587] bLength=7
<7>[ 1543.717592] bDescriptorType=5
<7>[ 1543.717598] bEndpointAddress=2
<7>[ 1543.717604] wMaxPacketSize=200
<7>[ 1543.717610] bInterval=0
<7>[ 1543.717616] RT_usb_endpoint_is_bulk_out = 2
<7>[ 1543.717623]
<7>[ 1543.717626] usb_endpoint_descriptor(2):
<7>[ 1543.717632] bLength=7
<7>[ 1543.717640] bDescriptorType=5
<7>[ 1543.717646] bEndpointAddress=3
<7>[ 1543.717652] wMaxPacketSize=200
<7>[ 1543.717658] bInterval=0
<7>[ 1543.717663] RT_usb_endpoint_is_bulk_out = 3
<7>[ 1543.717670]
<7>[ 1543.717673] usb_endpoint_descriptor(3):
<7>[ 1543.717680] bLength=7
<7>[ 1543.717685] bDescriptorType=5
<7>[ 1543.717691] bEndpointAddress=84
<7>[ 1543.717697] wMaxPacketSize=40
<7>[ 1543.717703] bInterval=1
<7>[ 1543.717709] RT_usb_endpoint_is_int_in = 4, Interval = 1
<7>[ 1543.717718] nr_endpoint=4, in_num=2, out_num=2
<7>[ 1543.717723]
<7>[ 1543.717728] USB_SPEED_HIGH
<7>[ 1543.721106] Chip Version ID: VERSION_NORMAL_TSMC_CHIP_88C.
<7>[ 1543.721127] RF_Type is 3!!
<7>[ 1543.730135] EEPROM type is E-FUSE
<7>[ 1543.730151] ====> ReadAdapterInfo8192C
<7>[ 1543.732545] Boot from EFUSE, Autoload OK !
<7>[ 1543.951428] EEPROMVID = 0x0bda
<7>[ 1543.951440] EEPROMPID = 0x8176
<7>[ 1543.951446] EEPROMCustomerID : 0x00
<7>[ 1543.951452] EEPROMSubCustomerID: 0x00
<7>[ 1543.951457] RT_CustomerID: 0x00
<7>[ 1543.951468] _ReadMACAddress MAC Address from EFUSE = 00:0b:e2:47:69:7e
<7>[ 1543.951481] EEPROMRegulatory = 0x0
<7>[ 1543.951487] _ReadBoardType(0)
<7>[ 1543.951494] BT Coexistance = disable
<7>[ 1543.951503] RT_ChannelPlan: 0x0a
<7>[ 1543.951512] _ReadPSSetting...bHWPwrPindetect(0)-bHWPowerdown(0) ,bSupportRemoteWakeup(0)
<7>[ 1543.951521] ### PS params=> power_mgnt(1),usbss_enable(0) ###
<7>[ 1543.951527] ### AntDivCfg(0)
<7>[ 1543.951533] readAdapterInfo_8192CU(): REPLACEMENT = 1
<7>[ 1543.951543] <==== ReadAdapterInfo8192C in 220 ms
<7>[ 1543.952733] rtw_register_early_suspend
<7>[ 1543.952781] rtw_macaddr_cfg MAC Address = 00:0b:e2:47:69:7e
<7>[ 1543.952792] MAC Address from pnetdev->dev_addr= 00:0b:e2:47:69:7e
<7>[ 1543.968891] bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0
<7>[ 1543.982554] rtw_android_priv_cmd: Android private cmd "BLOCK 1" on wlan0
<7>[ 1544.087022] +871x_drv - drv_open, bup=0
<7>[ 1544.096826] ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC
<7>[ 1544.096849] FirmwareDownload92C accquire FW from embedded image
<7>[ 1544.096861] fw_ver=v80, fw_subver=0, sig=0x88c0
<7>[ 1544.138820] fw download ok!
<7>[ 1544.138840] Set RF Chip ID to RF_6052 and RF type to 1T1R.
<7>[ 1544.612177] IQK:Start!!!
<7>[ 1544.626920] Path A IQK Success!!
<7>[ 1544.639177] Path A IQK Success!!
<7>[ 1544.644172] IQK: final_candidate is 0
<7>[ 1544.644189] IQK: RegE94=101 RegE9C=e RegEA4=fb RegEAC=4 RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0
<7>[ 1544.644197] Path A IQ Calibration Success !
<7>[ 1544.755054] pdmpriv->TxPowerTrackControl = 1
<7>[ 1544.764057] MAC Address from REG_MACID = 00:0b:e2:47:69:7e
<7>[ 1544.764078] rtl8192cu_hal_init in 680ms
<7>[ 1544.764090] MAC Address = 00:0b:e2:47:69:7e
<7>[ 1544.784343] rtw_cfg80211_init_wiphy:rf_type=3
<7>[ 1544.784365] -871x_drv - drv_open, bup=1
<6>[ 1544.784633] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[ 1544.800141] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
<7>[ 1544.800186] set_mode = IW_MODE_INFRA
<7>[ 1544.804531] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
<7>[ 1544.835742] rtw_android_priv_cmd: Android private cmd "BLOCK 0" on wlan0

# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IMM76D
ro.build.display.id=crane_hn-eng 4.0.4 IMM76D 20120808 dev-keys
ro.build.version.incremental=20120808
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=2012年 08月 08日星期三 18:03:15 CST
ro.build.date.utc=1344420195
ro.build.type=eng
ro.build.user=root
ro.build.host=ubuntu
ro.build.tags=dev-keys
ro.product.model=HNMID
ro.product.brand=hn
ro.product.name=crane_hn
ro.product.device=crane-hn
ro.product.board=crane
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=unknown
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=exDroid
# ro.build.product is obsolete; use ro.product.device
ro.build.product=crane-hn
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=crane_hn-eng 4.0.4 IMM76D 20120808 dev-keys
ro.build.fingerprint=hn/crane_hn/crane-hn:4.0.4/IMM76D/20120808:eng/dev-keys
ro.build.characteristics=tablet
# end build properties
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=Ring_Synth_04.ogg
ro.config.notification_sound=pixiedust.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
dalvik.vm.heapsize=256m
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
ro.kernel.android.checkjni=0
persist.sys.timezone=Asia/Shanghai
persist.sys.language=zh
persist.sys.country=CN
wifi.interface=wlan0
wifi.supplicant_scan_interval=15
debug.egl.hw=1
ro.display.switch=1
ro.opengles.version=131072
persist.sys.strictmode.visual=0
persist.sys.strictmode.disable=1
hwui.render_dirty_regions=false
hn.config.play.bootsound=1
rild.libargs=-d_/dev/ttyUSB1
ril.pppchannel=/dev/ttyUSB2
ril.function.dataonly=1
hana.ime.def=com.android.inputmethod.latin/.LatinIME
persist.sys.usb.config=mass_storage,adb
ro.sf.lcd_density=160
ro.product.firmware=1.4
ro.property.tabletUI=true
ro.ril.ecclist=110,119,120,112,114,911
ro.setupwizard.mode=OPTIONAL
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt

8192cu 578172 0 - Live 0xbf128000
wlan 756 0 - Live 0xbf002000
mali 130273 10 - Live 0xbf068000
ump 42254 15 mali, Live 0xbf057000
dmard06 10470 0 - Live 0xbf050000
mma7660 6970 0 - Live 0xbf04a000
sun4i_csi0 27732 0 - Live 0xbf03f000
gc0308 14177 1 - Live 0xbf037000
gt2005 24320 1 - Live 0xbf02c000
videobuf_dma_contig 5659 1 sun4i_csi0, Live 0xbf027000
videobuf_core 18067 2 sun4i_csi0,videobuf_dma_contig, Live 0xbf01d000
sun4i_ts 16527 0 - Live 0xbf014000
ft5x0x_td 10094 0 - Live 0xbf00d000
sun4i_vibrator 2302 0 - Live 0xbf009000
kk_insmoddriver_i 879 0 - Live 0xbf000000

RAM: 448 MB

System RAM: 448.000MB
Mali Sdram: 64.000MB

Flash: 4 GB Build-in (3.696 GB actual)

nand: 3.696 GB

Find Similar devices
Same CPU:
Same Display resolution:
Same ro.build.description:

Link: Here I buy Chinese smartphones and tablets

Touch Screen for Explay Informer 706 3G

Replacement Battery for Explay Informer 706 3G

Cover Cases for Explay Informer 706 3G