1. Install SpecDevice
2. Run and decode your specs
3. Get your link (read more...)
Similar device in database: Chinese Galaxy S3 Clone
| General Specifications | |
|---|---|
| Manufacturer | Samsung |
| Model | I9300 |
| Firmware | 4.1.9; eng.bz.1364456302; SDK15 |
| CPU | 4 cores; ARMv7 Processor rev 0 (v7l); Max: 1400,0 MHz; Min: 200,0 MHz |
| Display | 960 x 540; DPI: 240; Evaluated Size: 4,6" |
| Touch screen | Multitouch 5 points |
| GPU | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.8@2116011 |
| RAM | 512 MB (482 MB available) |
| Flash | 4 GB (3.618 GB actual) (see memory map tab) |
| Communications | |
| Phone | GSM, Dual SIM |
| WiFi | wlan_mt6628; IEEE 802.11 b/g/n; MediaTek MT6628; AP Mode |
| USB Host | No |
| Bluetooth | Bluetooth 3.0+HS, 4.0 |
| GPS | Yes |
| Advanced Features | |
| Front camera | Photo: 8.0 MP; Max: 3264x2448; Focus: auto continuous-picture continuous-video macro infinity manual fullscan; Flash modes: auto on off torch |
| Back camera | Photo: 1.9 MP; Max size: 1600x1200; Focus: infinity; No flash |
| Sensors | adxl346 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; |
| stk31xx Proximity Sensor (Capella); range: 0...1; resolution: 1 (100%); power: 0,13mA; | |
| stk31xx Light Sensor (Capella); range: 0...10240; resolution: 1 (0,01%); power: 0,13mA; | |
| Vibrator | Yes |
| Supported languages | 43; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
| Battery | Technology: Li-ion; Voltage: 3567 |
| FM radio | Supported by chipset |
| SD Version: | 1.1 5 |
KERNEL: Linux version 3.0.13 (bz@ubuntu) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Thu Mar 28 15:38:11 CST 2013
CODENAME: REL
Mainboard: I9300
BRAND: Samsung
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: GalaxyS3
DISPLAY: GINGERBREAD.ZSKI3
FINGERPRINT: MAC/A117_MULB:4.0.4/IMM76D/eng.bz.1364456302:user/test-keys
HARDWARE: mt6577
ID: IMM76D
TAGS: test-keys
Processor : ARMv7 Processor rev 0 (v7l)
processor : 0
BogoMIPS : 1993.93
processor : 1
BogoMIPS : 2000.48
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc09
CPU revision : 0
Hardware : SMDK4x12
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<6>[ 3358.466348] (1)[Power/PMIC] [hwPWMsetting]...........
<7>[ 3358.484591] (1)[4356:dmesg] exit
<7>[ 3358.484854] (1)[4356:dmesg] sig 17 to [4351:AsyncTask #4]
<7>[ 3358.507158] (1)[306:WifiStateMachin] fork [4357:WifiStateMachin]
<7>[ 3358.507445] (0)[4357:WifiStateMachin] set proc[4357] name: ->[loadDriverThrea]
<6>[ 3358.509655] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3358.532995] (1)[WLAN] rfkill_set_block(blocked 0)
<6>[ 3358.533009] (1)[WLAN] Power on
<3>[ 3358.533026] (1)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[ 3358.533048] (1)[STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[ 3358.533109] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[ 3358.533125] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(GPIO124)
<3>[ 3358.533136] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO122)
<3>[ 3358.533145] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(not defined)
<3>[ 3358.533155] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[ 3358.533165] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO13)
<3>[ 3358.533176] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(14)
<3>[ 3358.533185] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO15)
<3>[ 3358.533195] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(18)
<3>[ 3358.533205] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<3>[ 3358.533215] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[ 3358.533225] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[ 3358.533234] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[ 3358.533244] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[ 3358.533254] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[ 3358.533264] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_CK(GPIO56)
<3>[ 3358.533274] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_WS(GPIO57)
<3>[ 3358.533284] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_DAT(GPIO58)
<3>[ 3358.533294] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(GPIO206)
<3>[ 3358.533304] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(GPIO112)
<3>[ 3358.533314] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[ 3358.533327] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<7>[ 3358.540198] (0)WQ_WARN: cpu:4, proc:kworker/u:2, [WorkQueueHandler+0x0/0x18 [mtklfb]]dur: 15345384 > 15ms
<7>[ 3358.544002] (0)[263:er.ServerThread] fork [4358:er.ServerThread]
<7>[ 3358.544618] (1)[4358:er.ServerThread] set proc[4358] name: ->[Thread-298]
<6>[ 3358.552973] (1)[Power/PMIC] [hwPWMsetting]...........
<7>[ 3358.565208] (0)[4358:Thread-298] exit
<6>[ 3358.596255] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3358.639571] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3358.682961] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3358.726249] (1)[Power/PMIC] [hwPWMsetting]...........
<3>[ 3358.735846] (0)[WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[ 3358.735917] (0)[WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<4>[ 3358.736180] (0)[STP-PSM] [E]_stp_psm_notify_stp(1147):ERROR! Invalid Action!!
<4>[ 3358.736203] (0)
<3>[ 3358.736282] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[ 3358.736340] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<4>[ 3358.736866] (0)mtk_get_bus_freq() return 260000
<3>[ 3358.737631] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[ 3358.737676] (0)Flush type = 4 Rx Queue
<3>[ 3358.738152] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[ 3358.738206] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[ 3358.738251] (0)[STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[ 3358.738285] (0)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[ 3358.738326] (0)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<6>[ 3358.738378] (0)[STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[ 3358.738416] (0)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[ 3358.738457] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[ 3358.738500] (0)[STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[ 3358.744369] (0)[WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6628)
<3>[ 3358.750233] (0)[WMT-IC][I]mt6628_ver_check:MT6628: read hw_ver (hw version) (0x8a10)
<3>[ 3358.756109] (0)[WMT-IC][I]mt6628_ver_check:MT6628: read fw_ver (rom version) (0x8a10)
<3>[ 3358.756164] (0)[WMT-IC][I]mt6628_find_wmt_ic_info:found ic info(0x8a10) by full match! index:1
<3>[ 3358.756220] (0)[WMT-IC][I]mt6628_ver_check:MT6628: wmt ic info: MT6628.E2 (0x8a10, WMTHWVER:1, patch_ext:_e2)
<3>[ 3358.756271] (0)[WMT-CORE][I]wmt_core_hw_check:chip id(0x6628) ver_check ok
<7>[ 3358.768124] (0)WQ_WARN: cpu:4, proc:kworker/u:2, [WorkQueueHandler+0x0/0x18 [mtklfb]]dur: 15457385 > 15ms
<5>[ 3358.768978] (0)[Power/Battery] [use_chip_trim_value] 4176 -> 4196
<5>[ 3358.769042] (0)[Power/Battery] [FG] 4196
<5>[ 3358.769086] (0)[Power/Battery] [FG] gFG_current_inout_battery : 4196
<6>[ 3358.769549] (1)[Power/PMIC] [hwPWMsetting]...........
<7>[ 3358.771125] (0)WQ_WARN: cpu:0, proc:kworker/0:2, [thermal_zone_device_check+0x0/0x18]dur: 315377307 > 15ms
<3>[ 3358.771624] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[ 3358.771676] (0)[WMT-IC][I]mt6628_sw_init:WMT-CORE: change baudrate(4000000) ok
<3>[ 3358.774927] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(srh_patch) result(0)
<3>[ 3358.774980] (0)[WMT-IC][I]mt6628_patch_dwn:valid patch found: (/system/etc/firmware//mt6628_patch_e2_hdr.bin)
<3>[ 3358.775261] (0)[WMT-IC][I]mt6628_patch_dwn:===========================================
<3>[ 3358.775312] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Built Time = 20121031155024a
<3>[ 3358.775356] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[ 3358.775396] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[ 3358.775437] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Ph Ver = 0x0010
<3>[ 3358.775477] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Platform = 1226
<3>[ 3358.775516] (0)[WMT-IC][I]mt6628_patch_dwn:===========================================
<3>[ 3358.802442] (1)[WMT-CTRL][W]wmt_ctrl_rx:wmt_ctrl_rx be signaled, but no rx data(200)
<6>[ 3358.812764] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3358.856087] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3358.899414] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3358.942672] (1)[Power/PMIC] [hwPWMsetting]...........
<3>[ 3358.942989] (0)[WMT-IC][I]mt6628_patch_dwn:wmt_core: patch dwn:0 frag(26, 356) ok
<3>[ 3358.943730] (0)[WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf14cd28)
<3>[ 3358.944724] (0)[WMT-IC][I]mt6628_sw_init:init_coex ok
<6>[ 3358.945484] (0)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[ 3358.945497] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[ 3358.945510] (0)[STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[ 3358.945520] (0)[WMT-IC][I]mt6628_sw_init:enable host STP-UART-FULL mode
<3>[ 3358.957636] (0)[WMT-IC][I]mt6628_sw_init:co-clock disabled.
<3>[ 3358.958711] (0)[WMT-IC][I]mt6628_sw_init:set fm mode (2) ok
<3>[ 3358.958722] (0)[WMT-IC][I]mt6628_sw_init:disable mt662x firmware coredump
<6>[ 3358.958734] (0)[STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[ 3358.958746] (0)[STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[ 3358.958758] (0)mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[ 3358.958766] (0)board_sdio_ctrl force off before on
<6>[ 3358.958773] (0)mtk_wcn_cmb_sdio_off (3)
<5>[ 3358.958889] (0)[Power/clkmgr] [freq_meter] data = 15494, freq = 196 MHz
<5>[ 3358.958908] (0)[Power/clkmgr] [freq_meter] data = 43, freq = 0 MHz
<6>[ 3358.958925] (0)mtk_wcn_cmb_sdio_on (3)
<5>[ 3358.959035] (0)[Power/clkmgr] [freq_meter] data = 15495, freq = 196 MHz
<3>[ 3358.959053] (0)msdc3 -> USR Resume <- msdc_pm() : L<1716> PID
<3>[ 3358.975872] (1)msdc3 -> ================ <- msdc_set_mclk() : L<976> PID
<3>[ 3358.975910] (1)msdc3 -> !!! Set<400KHz> Source<197000KHz> -> sclk<397KHz> DDR<0> mode<0> div<124> <- msdc_set_mclk() : L<978> PID
<3>[ 3358.975940] (1)msdc3 -> ================ <- msdc_set_mclk() : L<979> PID
<6>[ 3358.986008] (1)[Power/PMIC] [hwPWMsetting]...........
<3>[ 3359.004321] (0)msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1786> PID
<3>[ 3359.018047] (0)msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<4117> PID
<3>[ 3359.018084] (0)msdc3 -> ================ <- msdc_set_mclk() : L<976> PID
<3>[ 3359.018101] (0)msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<978> PID
<3>[ 3359.018117] (0)msdc3 -> ================ <- msdc_set_mclk() : L<979> PID
<6>[ 3359.019117] (0)mmc2: new high speed SDIO card at address 0001
<6>[ 3359.020723] (0)[WMT-DFT][I]hif_sdio_probe:start!
<6>[ 3359.020736] (0)[WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x6628) num(0x1)
<6>[ 3359.020746] (0)[WMT-DFT][I]hif_sdio_probe:card->info[0]: 6628
<6>[ 3359.020755] (0)[WMT-DFT][I]hif_sdio_probe:card->info[1]: Combo
<6>[ 3359.020764] (0)[WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[ 3359.020773] (0)[WMT-DFT][I]hif_sdio_probe:card->info[3]:
<6>[ 3359.020885] (0)[WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(524288)
<7>[ 3359.020920] (0)WQ_WARN: cpu:4, proc:kworker/u:2, [mmc_rescan+0x0/0x324]dur: 60960231 > 15ms
<6>[ 3359.029297] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3359.072595] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3359.115750] (0)[WMT-DFT][I]hif_sdio_wifi_on:start!
<6>[ 3359.115920] (1)[Power/PMIC] [hwPWMsetting]...........
<7>[ 3359.115977] (0)[2:kthreadd] fork [4359:kthreadd]
<6>[ 3359.116033] (0)[WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<5>[ 3359.116080] (0)[wlan] [RT_MONITOR]WARNNING [4359:ksdioirqd/mmc2] SET NOT ALLOW RT Prio [1] for proc [4359:ksdioirqd/mmc2]
<4>[ 3359.116130] (0)net_device prDev(0xd8c05000) allocated
<5>[ 3359.117936] (0)[wlan] Open FW image: WIFI_RAM_CODE done
<5>[ 3359.118513] (0)[wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[ 3359.119206] (0)[wlan] Virtual Address = e502b000 for COMMON MGMT MEMORY POOL.
<5>[ 3359.119237] (0)[wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[ 3359.119281] (0)[wlan] Virtual Address = e507a000 for SW_RFB_T.
<5>[ 3359.119306] (0)[wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[ 3359.119345] (0)[wlan] Virtual Address = e507e000 for MSDU_INFO_T.
<6>[ 3359.119372] (0)[wlan] wlanAdapterStart(): Acquiring LP-OWN
<6>[ 3359.135792] (0)[wlan] Chip ID: 0x6628
<6>[ 3359.135809] (0)[wlan] Revision ID: 0x0
<6>[ 3359.159197] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3359.202513] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3359.245808] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3359.289109] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3359.332414] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3359.375717] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3359.419024] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3359.462326] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3359.505634] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3359.548932] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3359.592240] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3359.635545] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3359.678850] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3359.722152] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3359.765461] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3359.808762] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3359.852072] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3359.876400] (0)[wlan] wlanAdapterStart(): Waiting for Ready bit..
<6>[ 3359.895365] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3359.938752] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3359.955921] (0)[wlan] Ready bit asserted
<6>[ 3359.982050] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3360.025286] (1)[Power/PMIC] [hwPWMsetting]...........
<5>[ 3360.058093] (0)[wlan] RF CAL FAIL = (0),BB CAL FAIL = (0)
<5>[ 3360.058306] (0)[wlan] [wifi] wlan%d netif_carrier_off
<6>[ 3360.058326] (0)[wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[ 3360.058370] (0)[wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[ 3360.058456] (0)[wlan] Domain: map=0, idx=1, code=0x0000
<7>[ 3360.059699] (0)[2:kthreadd] fork [4360:kthreadd]
<5>[ 3360.059884] (1)[wlan] tx_thread starts running...
<6>[ 3360.068106] (0)[WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(6628) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[ 3360.068122] (0)[WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[ 3360.068142] (0)[WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 coredump:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[ 3360.068503] (1)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<3>[ 3360.068538] (1)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<4>[ 3360.068547] (0)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<6>[ 3360.068598] (1)[Power/PMIC] [hwPWMsetting]...........
<7>[ 3360.080590] (1)[4357:loadDriverThrea] exit
<5>[ 3360.081926] (0)[Power/Battery] [use_chip_trim_value] 7214 -> 7250
<5>[ 3360.081952] (0)[Power/Battery] [FG] 7250
<5>[ 3360.081964] (0)[Power/Battery] [FG] gFG_current_inout_battery : 7250
<7>[ 3360.083115] (0)WQ_WARN: cpu:0, proc:kworker/0:2, [thermal_zone_device_check+0x0/0x18]dur: 317397462 > 15ms
<7>[ 3360.093766] (0)[2:kthreadd] fork [4361:kthreadd]
<6>[ 3360.094756] (1)[RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[ 3360.094782] (1)ADDRCONF(NETDEV_UP): wlan0: link is not ready
<5>[ 3360.106565] (1)init: starting `wpa_supplicant`
<7>[ 3360.108248] (1)[1:init] fork [4362:init]
<7>[ 3360.108885] (0)[4362:init] set proc[4362] name: ->[logwrapper]
<6>[ 3360.111905] (1)[Power/PMIC] [hwPWMsetting]...........
<7>[ 3360.112879] (0)[306:WifiStateMachin] fork [4363:WifiStateMachin]
<7>[ 3360.113038] (0)[4363:WifiStateMachin] set proc[4363] name: ->[WifiMonitor]
<7>[ 3360.119022] (0)[4362:logwrapper] fork [4364:logwrapper]
<7>[ 3360.126495] (0)[4364:logwrapper] set proc[4364] name: ->[wpa_supplicant]
<6>[ 3360.155197] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3360.198513] (1)[Power/PMIC] [hwPWMsetting]...........
<5>[ 3360.226162] (0)[wlan] N=0 closed
<5>[ 3360.226186] (0)[wlan] EVENT-ROAMING ABORT: Current Time = 3008930
<5>[ 3360.226201] (0)[wlan] [13] TRANSITION: [0] -> [0]
<6>[ 3360.226639] (0)[wlan] NAF=0,0,0
<6>[ 3360.226801] (0)[wlan] NAF=0,0,0
<6>[ 3360.241809] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3360.285113] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3360.328500] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3360.371796] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3360.415153] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3360.458338] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3360.501644] (1)[Power/PMIC] [hwPWMsetting]...........
<5>[ 3360.509275] (0)[wlan] [13] TRANSITION: [0] -> [2]
<6>[ 3360.544939] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3360.588280] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3360.631631] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3360.674922] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3360.718226] (1)[Power/PMIC] [hwPWMsetting]...........
<5>[ 3360.736786] (0)[wlan] [13] TRANSITION: [2] -> [0]
<6>[ 3360.744576] (0)[wlan] NAF=0,0,0
<6>[ 3360.761453] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3360.804771] (1)[Power/PMIC] [hwPWMsetting]...........
<5>[ 3360.833793] (1)[wlan] CMD set_band=0
<5>[ 3360.837721] (0)[wlan] [13] TRANSITION: [0] -> [2]
<6>[ 3360.848083] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3360.891370] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3360.934753] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3360.978057] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3361.021367] (1)[Power/PMIC] [hwPWMsetting]...........
<6>[ 3361.064672] (1)[Power/PMIC] [hwPWMsetting]...........
<5>[ 3361.067180] (0)[wlan] [13] TRANSITION: [2] -> [0]
<6>[ 3361.072288] (0)[wlan] NAF=0,0,0
<6>[ 3361.107922] (1)[Power/PMIC] [hwPWMsetting]...........
<7>[ 3361.117891] (0)[4351:AsyncTask #4] fork [4365:AsyncTask #4]
<7>[ 3361.127462] (1)[4365:AsyncTask #4] set proc[4365] name: ->[dmesg]
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IMM76D
ro.build.display.id=A117_MULB_V2.0_V02_2013-03-28_15:39:34
ro.product.model=A117_MULB
ro.product.hw.version=V2.0
ro.product.particular.version=V02
ro.build.version.incremental=eng.bz.1364456302
ro.custom.build.version=1364456302
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=2013年 03月 28日 星期四 15:39:52 CST
ro.build.date.utc=1364456392
ro.build.type=user
ro.baseband.version=MAUI.11AMD.W11.50.SP.V20,2012/10/25
ro.kernel.version= 3.0.13 user1@ubuntu#100 THU OCT 25 12:12:12 CST 2012
ro.build.user=bz
ro.build.host=ubuntu
ro.build.tags=test-keys
ro.product.brand=MAC
ro.product.name=A117_MULB
ro.product.device=A117_MULB
ro.product.board=A117_MULB
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=MAC
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=A117_MULB
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=A117_MULB-user 4.0.4 IMM76D eng.bz.1364456302 test-keys
ro.build.fingerprint=MAC/A117_MULB:4.0.4/IMM76D/eng.bz.1364456302:user/test-keys
ro.build.flavor=
ro.build.characteristics=
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=ALPS.ICS2.MP.V1.30
ro.mediatek.platform=MT6577
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.ICS2.MP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=128m
# Encrypt phone function
ro.crypto.tmpfs_options=mode=0771,uid=1000,gid=1000
ro.crypto.fs_type=ext4
ro.crypto.fs_real_blkdev=/emmc@usrdata
ro.crypto.fs_mnt_point=/data
ro.crypto.fs_options=noauto_da_alloc
ro.crypto.fs_flags=0x00000406
# USB MTP WHQL
ro.sys.usb.mtp.whql.enable=0
# Power off opt in IPO
sys.ipo.pwrdncap=2
ro.sys.usb.storage.type=mtp,mass_storage
ro.sys.usb.bicr=yes
#
# ADDITIONAL_BUILD_PROPERTIES
#
fmradio.driver.chip=3
ril.external.md=1
ro.sf.hwrotation=0
ril.current.share_modem=2
launcherplus.allappsgrid=2d
launcher2.allappsgrid=3d_20
curlockscreen=2
ro.mediatek.gemini_support=true
ro.operator.optr=OP02
ro.operator.spec=SPEC0200
ro.operator.seg=SEGA
persist.radio.fd.counter=20
persist.radio.fd.off.counter=20
drm.service.enabled=true
fmradio.driver.enable=1
mediatek.wlan.chip=MT6628
mediatek.wlan.module.postfix=_mt6628
dalvik.vm.mtk-stack-trace-file=/data/anr/mtk_traces.txt
ro.config.notification_sound=S_Whistle.ogg
ro.config.alarm_alert=Daybreak.ogg
ro.config.sms_notifi_sound=S_On_time.ogg
ro.config.ringtone=S_Over_the_horizon.ogg
ro.setupwizard.mode=DISABLED
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
wlan_mt6628 285587 0 - Live 0xbf201000 (P)
cfg80211 121940 0 - Live 0xbf1d8000
mtk_fm_priv 2855 0 - Live 0xbf1d4000 (P)
mtk_fm_drv 113273 1 mtk_fm_priv, Live 0xbf1b0000
mtk_stp_bt 39986 0 - Live 0xbf1a3000
mtk_stp_gps 37294 0 - Live 0xbf196000
mtk_stp_uart 21589 1 - Live 0xbf18d000 (P)
mtk_stp_wmt 378354 7 wlan_mt6628,mtk_fm_priv,mtk_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf122000 (P)
mtk_hif_sdio 18482 2 wlan_mt6628,mtk_stp_wmt, Live 0xbf119000
morecpu 1094 0 - Live 0xbf115000
devinfo 840 0 - Live 0xbf111000 (P)
devapc 4553 0 - Live 0xbf10c000 (P)
sec 90923 0 - Live 0xbf0ef000 (P)
vcodec_kernel_driver 42942 2 - Live 0xbf0df000 (P)
m4u 114005 24 - Live 0xbf0ba000 (P)
ccmni 17142 0 - Live 0xbf0b1000 (P)
ccci 118657 15 ccmni, Live 0xbf089000 (P)
ccci_plat 128837 2 ccmni,ccci, Live 0xbf060000 (P)
mtk_drvb_77 6081 0 - Live 0xbf05b000 (P)
mtklfb 23566 0 - Live 0xbf051000
pvrsrvkm 233673 81 mtklfb, Live 0xbf009000
aed 16296 3 - Live 0xbf000000 (P)
RAM: 512 MB (482 MB available)
System RAM: 482.000MB
mtkfb.0: 8.000MB
Flash: 4 GB (3.618 GB actual)
mmcblk0: 3.618 GB
Touch Screen for Samsung I9300
$1.65 S3 Touchscreen For Samsung Galaxy S III S3 i9300 i9308 GT-i9300 GT-i9308 LCD Front Outer Glass Touch Screen Lens Replacement
$1.99 For Samsung Galaxy S3 i9300 i9308 S4 GT-i9500 S5 G900F Front Touch screen Panel LCD Out Glass Cover Lens Replacement
$13.17 LCD Screen For Samsung S3 9300 i9300 LCD For Samsung Galaxy S3 Display LCD Touch Screen Digitizer Assembly Repair Parts
$10.4 4.8"Screen Super AMOLED For Samsung S3 I9300 LCD Display For S3 NEO I9301 LCD Screen Touch Digitizer Assembly with frame
$10.47 100% tested Super AMOLED For Samsung S3 I9300 LCD Display For S3 NEO I9301 LCD Screen Touch Digitizer Assembly with frame
$10.34 Super AMOLED For SAMSUNG S3 LCD Display Touch Screen with Frame i9300 i9305 For SAMSUNG S3 LCD Display i747 i535 T999 LCD
$9.98 TFT Quality For Samsung Galaxy S3 GT-i9300 i9300 LCD Display Touch Screen Digitizer Assembly Replacement For Samsung i9300 LCD
$15.62 Tested For SAMSUNG Galaxy S3 LCD Display i9300 i8190 Touch Screen Digitizer Replacement For SAMSUNG Galaxy S3 Mini LCD Screen
$23.15 1PCS LCD Screen For SAMSUNG Galaxy S III S3 LCD Display I9300 i9305 Touch Screen display With frame Mobile Phone Replacement
$9 10Pcs/Lot For Samsung Galaxy S3 I9300 I9300 i747 i9305 Touch Screen Front Panel Glass Lens LCD Outer Glass Replacement
$17.84 TFT LCD For Samsung Galaxy S3 i9300 i9300i i9301 i9308i Touch Screen Digitizer LCD Display Adjust Panel Sensor Frame Tools
$11.8 10Pcs\lot For Samsung Galaxy S3 i9300 i9308 S4 GT-i9500 S5 G900F Front Touch screen Panel LCD Out Glass Cover Lens Replacement
$20.9 LCD Display For Samsung for Galaxy S3 i9300 with Touch Screen Digitizer Bezel Frame Assembly Parts
$17.14 4.8'' S3 LCD For SAMSUNG Galaxy S III S3 LCD Screen Display Digitizer i9300 i9300i LCD Replacement Parts
$11.99 Women PU Leather Case for iPhone Samsung Xiaomi Huawei Nokia Phone Bag Touch Screen Small Shoulder Crossbody Pouch Wallet Bag
$15.99 4.7'' I9300 Lcd For Samsung Galaxy S3 Lcd Screen I9305 I9301 I9300I LCD Display + Touch Screen Digitizer Assembly With Frame
$4.49 for I9300 Black/white/Blue Glass Lens pantalla for samsung galaxy s3 Glass (not digitizer lcd display)+sticker
$2.09 New Touch Screen For Samsung Galaxy SIII S3 i9300 Front Touch Screen Glass Lens Digitizer With Free adhesive Replacement Parts
$11.89 Tested S3 LCD Replacement For Samsung GALAXY S3 i9300 LCD Touch Screen Digitizer Assembly Repair Parts
$3.69 i9300 Digitizer For SAMSUNG S3 S4 S5 Mini Touch Panel Cover Outer Glass Lens For SAMSUNG S5 Front Screen Lens i9500 + Adhesive
Replacement Battery for Samsung I9300
$27.59 Brand New Battery For Samsung Galaxy S3 S5 S4 J7 J5 A7 A5 A3 Note 1/2/3 Note 4 Grand Prime J3 S7560 G361 N9150 S5 mini
$3.66 Phone Rear Battery Cover For Samsung Galaxy S3 I9300 I9305 I535 I747 L710 New Mobile Phone Panel Housing Frame Door Back Case
$29.58 1150mah 3.7v C-S2 battery for BlackBerry Curve 8300 8310 8320 8330 8520 8530 8700 8703e Smartphone batteries
$14.7 New High Quality Replacement Battery For Nokia BL-4C Phone Battery 5100 6100 1202 1265 1325 Nokia Lithium Battery
$24.43 For SAMSUNG EB-F1M7FLU 1500mAh Battery Galaxy S3 Mini S III more GT-I8190 i8160 I8190N GT-i8200 S7562 G313 SM-G730A NEW
$4.84 NEW 2600mAh EB-BG530BBE Battery For Samsung Galaxy Grand Prime G530 G530F G5308W G531 G531f G531h J3 2016 J5 2015 EB-BG530BBC
$1.57 S3 Battery Back Cover For Samsung Galaxy S3 i9300 GT-i9300 Rear Housing Battery Door Case Replacement Parts
$22.76 Universal Mini Battery Charger Dock Cradle Travel Charger for SAMSUNG S3 I9300 S4 I9500 S5 I9600 Note 2 3 N9000 Etc. Phones
$30.9 NEW Battery 1230mAh 4.6wh 3.7v JM1 For Blackberry jm1 Bold 9900 9930 9790 9380 P9981 Torch 9850 9860 Mobile Phone
$3.99 3100mAh Brand New Replacement Phone Lithium Battery For Samsung GALAXY 2016 Version J510 j5109 j5108 J5 EB-BJ510CBC EB-BJ510CBE
$4 High Capacity 2100mAh Battery for Samsung Galaxy S3 SIII I9300 I747 T999 L710 Batterie Batterij Bateria
$33.69 EB-BG530BBE 2600mAh for Grand Prime G530 F G530FZ Y H G531 J500 J3(2016) J320 High quality Replacement Battery
$32.97 1500mAh EB425161LU For S Duos S7562 S7566 S7568 i8160 S7582 S7560 S7580 i8190 High quality Replacement Battery
$2.78 For Samsung Galaxy S3 i9300 i9305 9300i 9308i Housing Battery Case Back Cover Rear Door Case Replacement Repair Parts
$4.51 For Samsung Galaxy S3 i9300 GT-i9300 i9305 S3 MINI i8190 GT-I8190N Back Housing Cover Case Battery Cover Replacement
$33.99 Battery EB-BG530CBU 2600mAh for Grand Prime J3 2016 G5308W G531F G530H/F Replacement Battery
$1.1 New Battery Contact Clip Connector For Samsung Galaxy S III 3 i9300 i9308 i939 Cell phone
$1.77 For Galaxy S3 i9300 i9308 i939 i535 i747 l710 r530 I9305 GT-i9300 GT-I9305 FPC Connector Battery Clip on motherboard mainboard
$28.46 For Samsung Galaxy S3 i9300 i9305 9300i 9308i Battery Cover Housing Back Rear Door Case Replacement Repair Parts
$18 Stonering Battery 2300mAh EB-L1G6LLU for Samsung Galaxy S3 I9300 I9305 I9082 I9128v I879 I535 T999 L710 I9308 I747 Cell Phone
Cover Cases for Samsung I9300
$28 E7 Plus Luxury Gradient Glitter Plating Case For MOTO E7 Plus Motorola E7 Plus Soft Silicone Protect Back Cover E7Plus
$1.21 Screen Protector for Samsung Galaxy S Duos S7562 S III S3 i9300 S3 mini Full Cover Soft Hydrogel Film HD Protective Film
$24.71 Silicone Case For Samsung S10 S20 S21 A20 A30 S7 Edge S8 S9 A81 S10E FE Lite Plus KF-2 Angel Stitch
$4 T-Tom And J-Jerry Phone Case For Honor 200 90 Lite X7B X6 X8B X6A X6S X7A X8A X9A X9B X5 Plus 70 20Pro 10Lite Cartoon Cover
$23.4 G-4 Stitch Soft Case for OPPO A94 A95 A96 A92 A92S A76 A77 Find X3 Lite Neo Pro 5G
$3.55 3PCS For Blackview BV9300 Hydrogel Film Protective On Blackview BV9300 6.7 Inch Screen Protector Smart Phone Cover Film
$0.78 Luxury TPU Soft Phone Case for Huawei P40 Lite P30 Lite P60 Pro P50 Pro P20 Pro P Smart Z P30 Pro P20 Dsiney Mickey Cover
$23.14 G-4 Stitch Black Soft Silicone Case for Samsung Galaxy J4 J5 J6 J7 J8 Core Prime Duo Pro 2018 S7 edge S8 S9 Plus
$3.26 Disney Stitch Cartoon Koala Case for Motorola Moto G30 G60 One Fusion G50 G9 Plus G8 Power Lite Edge 20 G22 Phone Silicone Funda
$3.11 Stitch Black Case for Samsung Galaxy S7 S8 S10E Edge J2 Prime J4 Core J5 J6 Plus J7 Duo J8 Pro
$7.13 Couple Stitch Angel Phone Case For Samsung J 7 plus 7core J7 neo J6 plus prime J6 J4 J5 Mobile Cover
$3.35 INS Retro Butterfly Silicone Phone Case For Huawei Nova 11 10 9 8 7 5 Pro 11 Ultra 9 7 SE 6 5G Shockproof Bumper Back Case Cover
$0.57 Gel Rubber Silicone Case Skin Cover Black For Samsung Galaxy S5 i9300
$4.83 For Blackview BV9300 Pro Soft TPU Silicone Mobile Phone Case for Blackview BV9300 Pro Back Cover Accessories
$4.02 Cool Formula 1 Racing Car For Samsung Galaxy J5 J3 J7 2017 J1 A3 A5 2016 A6 A8 J4 J6 Plus J2 Core 2018 Phone Case
$0.96 Wallet Flip Butterfly Leather Case For Samsung Galaxy S3 S4 S5 S6 S7 Edge S8 S9 S10 e S20 Plus Ultrs Note 8 9 10 Lite Book Cover
$10.99 For Blackview BV9300 case Metal Buckle retro Leather Back Case for Blackview BV9300 Cover Accessories
$3.1 Thumper Rabbit Black Case for Samsung Galaxy Note 8 S7 S8 S9 Edge J2 Prime J4 Core J5 J6 Plus J7 Duo J8 Pro
$0.99 Earpiece Speaker Anti Dust Mesh For Samsung Galaxy S3 i9300 S4 i9500 i9505 S5 i9600 Note 3 4 5 N9000 N910 N920 A8 A8000
$3.25 For Blackview BV9300 Hydrogel Film Protective On Blackview BV9300 6.7 Inch Screen Protector Smart Phone Cover Film
| Find Similar devices | |
|---|---|
| Same CPU: | |
| Same Display resolution: | |
| Same ro.build.description: | |
