TCT ALCATEL ONE TOUCH 992D
一般规格
生产厂家TCT
型号ALCATEL ONE TOUCH 992D
Android版4.0.4; vDCH-0; SDK15
中央处理单元2 cores; ARMv7 Processor rev 0 (v7l); Max: 1001,0 MHz; Min: 250,2 MHz
显示800 x 480; DPI: 240; Evaluated Size: 3,9"
触摸屏Multitouch 2 points
图形处理器PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.8@2116011
内存RAM512 MB (486 MB available)
快闪记忆体4 GB (3.566 GB actual); 16 GB (14.837 GB actual) (见存储器映射选项卡)
沟通
电话GSM, Dual SIM; Net: EDGE
WiFiwlan; IEEE 802.11 a/b/g/n; MediaTek MT6620; AP Mode
USB主机No
蓝牙Bluetooth 4.0+HS
全球定位系统No
高级功能
前置摄像头Photo: 4.9 MP; Max: 2560x1920; Focus: auto continuous-picture continuous-video macro infinity manual fullscan; Flash modes: auto on off torch
背照相机Photo: 0.3 MP; Max size: 640x480; Focus: infinity; No flash
传感器yamaha530 3-axis Magnetic Field sensor (Aichi Steel); range: 0...600; resolution: 0,002 (0%); power: 0,25mA;
bma222 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA;
stk31xx/cm3623 Proximity Sensor (Sitronix/Capella); range: 0...1; resolution: 1 (100%); power: 0,13mA;
stk31xx/cm3623 Light Sensor (Sitronix/Capella); range: 0...10240; resolution: 1 (0,01%); power: 0,13mA;
震动模式Yes
支持的语言43; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese
电池Technology: Li-ion; Voltage: 3994
FM radio76 to 108MHz
SD Version:1.1 5

KERNEL: Linux version 3.0.13 (android-bld@aclgcl-ubnt157) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Fri May 10 19:14:23 CST 2013
CODENAME: REL
Mainboard: Martell_lite
BRAND: TCT
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: Martell_lite_GSM
DISPLAY: SLPA.ICS
FINGERPRINT: TCT/Martell_lite/Martell_lite_GSM:4.0.4/IMM76D/vDCH-0:user/release-keys
HARDWARE: mt6577
ID: IMM76D
TAGS: release-keys

Processor : ARMv7 Processor rev 0 (v7l)
processor : 0
BogoMIPS : 1993.93
processor : 1
BogoMIPS : 2000.48
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc09
CPU revision : 0
Hardware : MT6577
Revision : 65fb8a00
Serial : 0000000000000000

GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture

<7>[185470.610991] (0)WQ_WARN: cpu:4, proc:kworker/u:2, dur: 9801231 > 8ms
<7>[185470.611021] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[185470.617627] (1)[2595:com.specdevice] fork [2634:com.specdevice]
<7>[185470.627528] (0)WQ_WARN: cpu:4, proc:kworker/u:1, dur: 11602385 > 8ms
<7>[185470.627576] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<3>[185470.629734] (0)**Cannot find HWE module**
<7>[185470.632475] (0)[2634:com.specdevice] exit
<7>[185470.644051] (0)WQ_WARN: cpu:4, proc:kworker/u:1, dur: 11465462 > 8ms
<7>[185470.644095] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[185470.660658] (0)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 11954538 > 8ms
<7>[185470.660690] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[185470.670612] (0)[2633:dmesg] exit
<7>[185470.670834] (0)[2633:dmesg] sig 17 to [2631:AsyncTask #2]
<7>[185470.677110] (0)WQ_WARN: cpu:4, proc:kworker/u:2, dur: 11799692 > 8ms
<7>[185470.677143] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[185470.693623] (0)WQ_WARN: cpu:4, proc:kworker/u:1, dur: 11390539 > 8ms
<7>[185470.693664] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[185470.710153] (0)WQ_WARN: cpu:4, proc:kworker/u:1, dur: 10599462 > 8ms
<7>[185470.710183] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[185470.726693] (0)WQ_WARN: cpu:4, proc:kworker/u:1, dur: 9839153 > 8ms
<7>[185470.726732] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[185470.776314] (0)WQ_WARN: cpu:4, proc:kworker/u:2, dur: 11194847 > 8ms
<7>[185470.776361] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[185470.791277] (1)[324:WifiStateMachin] fork [2635:WifiStateMachin]
<7>[185470.791972] (0)[2635:WifiStateMachin] set proc[2635] name: ->[loadDriverThrea]
<7>[185470.792854] (0)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 10937307 > 8ms
<7>[185470.792896] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[185470.809349] (0)WQ_WARN: cpu:4, proc:kworker/u:1, dur: 9861692 > 8ms
<7>[185470.809404] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[185470.825879] (0)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 10280615 > 8ms
<7>[185470.825924] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[185470.843485] (1)WQ_WARN: cpu:4, proc:kworker/u:1, dur: 11353000 > 8ms
<7>[185470.843533] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[185470.858946] (0)[2621:Thread-6008] exit
<7>[185470.870703] (1)[2628:Thread-6011] exit
<7>[185470.875681] (0)WQ_WARN: cpu:4, proc:kworker/u:1, dur: 12585693 > 8ms
<7>[185470.875717] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[185470.956517] (0)[283:er.ServerThread] fork [2636:er.ServerThread]
<7>[185470.956729] (1)[2636:er.ServerThread] set proc[2636] name: ->[Thread-4727]
<6>[185470.959702] (0)[WLAN] rfkill_set_block(blocked 0)
<6>[185470.959713] (0)[WLAN] Power on
<3>[185470.959727] (0)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[185470.959745] (0)[STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[185470.959783] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[185470.959797] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(GPIO112)
<3>[185470.959807] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO124)
<3>[185470.959817] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(not defined)
<3>[185470.959828] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[185470.959848] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO13)
<3>[185470.959859] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(14)
<3>[185470.959870] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO15)
<3>[185470.959880] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(18)
<3>[185470.959891] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<3>[185470.959901] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[185470.959912] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[185470.959922] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[185470.959932] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[185470.959942] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[185470.959952] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_CK(GPIO56)
<3>[185470.959963] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_WS(GPIO57)
<3>[185470.959973] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_DAT(GPIO58)
<3>[185470.959984] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(GPIO72)
<3>[185470.960007] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(GPIO122)
<3>[185470.960023] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[185470.960041] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<3>[185470.960069] (0)[WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<7>[185470.989360] (1)[2636:Thread-4727] exit
<7>[185471.024174] (0)WQ_WARN: cpu:4, proc:kworker/u:1, dur: 14027769 > 8ms
<7>[185471.024211] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[185471.057241] (0)WQ_WARN: cpu:4, proc:kworker/u:1, dur: 11629308 > 8ms
<7>[185471.057272] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[185471.073786] (0)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 12242616 > 8ms
<7>[185471.073824] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[185471.090329] (1)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 11695538 > 8ms
<7>[185471.090364] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[185471.106856] (0)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 12023692 > 8ms
<7>[185471.106890] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[185471.123484] (0)WQ_WARN: cpu:4, proc:kworker/u:1, dur: 12466154 > 8ms
<7>[185471.123519] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[185471.139926] (0)WQ_WARN: cpu:4, proc:kworker/u:2, dur: 12176923 > 8ms
<7>[185471.139958] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[185471.156473] (0)WQ_WARN: cpu:4, proc:kworker/u:1, dur: 12936923 > 8ms
<7>[185471.156507] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<3>[185471.163352] (0)[WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[185471.163378] (0)[WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<3>[185471.163564] (0)[WMT-LIB][I]wmt_lib_ps_handler:MT6620 Not Ready, Dont Send Sleep/Wakeup Command
<4>[185471.163579] (0)[STP-PSM] [E]_stp_psm_notify_stp(1137):ERROR! Invalid Action!!
<4>[185471.163585] (0)
<3>[185471.163618] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[185471.163632] (0)[WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[185471.163643] (0)[WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:ALL EINT not defined
<3>[185471.163654] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<4>[185471.165197] (0)mtk_get_bus_freq() return 260000
<3>[185471.165516] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[185471.165531] (0)Flush type = 4 Rx Queue
<3>[185471.165695] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[185471.165711] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[185471.165724] (0)[STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[185471.165734] (0)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[185471.165745] (0)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<6>[185471.165760] (0)[STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[185471.165771] (0)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[185471.165782] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[185471.165793] (0)[STP] mtk_wcn_stp_assert:[I] set f/w assert (0)
<3>[185471.171361] (0)[WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6620)
<7>[185471.172979] (0)WQ_WARN: cpu:4, proc:kworker/u:2, dur: 12293923 > 8ms
<7>[185471.173011] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<3>[185471.176922] (0)[WMT-IC][I]mt6620_ver_check:MT6620: read hw_ver (hw version) (0x8a11)
<3>[185471.182488] (0)[WMT-IC][I]mt6620_ver_check:MT6620: read fw_ver (rom version) (0x8a10)
<3>[185471.182509] (0)[WMT-IC][I]mt6620_find_wmt_ic_info:found ic info(0x8a11) by full match! index:3
<3>[185471.182524] (0)[WMT-IC][I]mt6620_ver_check:MT6620: wmt ic info: MT6620.E4 (0x8a11, WMTHWVER:3, patch_ext:_e3)
<3>[185471.182540] (0)[WMT-CORE][I]wmt_core_hw_check:chip id(0x6620) ver_check ok
<7>[185471.189580] (0)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 12367462 > 8ms
<7>[185471.189612] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<3>[185471.193595] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[185471.193662] (0)[WMT-IC][I]mt6620_sw_init:WMT-CORE: change baudrate(4000000) ok
<3>[185471.195501] (0)[WMT-IC][I]mt6620_update_patch_name:full firmware patch name: /system/etc/firmware/mt6620_patch_e3_hdr.bin
<3>[185471.198903] (0)[WMT-IC][I]mt6620_patch_dwn:===========================================
<3>[185471.198923] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Built Time = 20130305142130
<3>[185471.198935] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[185471.198946] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[185471.198957] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Ph Ver = 0x0014
<3>[185471.198968] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Platform = 1222
<3>[185471.198979] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Content Size = 0xa5c4
<3>[185471.199500] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Content CRC = 0x9139
<3>[185471.199513] (0)[WMT-IC][I]mt6620_patch_dwn:===========================================
<7>[185471.206062] (0)WQ_WARN: cpu:4, proc:kworker/u:2, dur: 12045692 > 8ms
<7>[185471.206095] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[185471.223656] (0)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 13372462 > 8ms
<7>[185471.223688] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[185471.239127] (0)WQ_WARN: cpu:4, proc:kworker/u:1, dur: 11839000 > 8ms
<7>[185471.239164] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[185471.255664] (0)WQ_WARN: cpu:4, proc:kworker/u:2, dur: 12121077 > 8ms
<7>[185471.255704] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[185471.288696] (0)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 11745462 > 8ms
<7>[185471.288728] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[185471.302621] (0)[2597:ReferenceQueueD] exit
<7>[185471.302876] (0)[2601:FinalizerDaemon] exit
<7>[185471.303110] (0)[2604:FinalizerWatchd] exit
<7>[185471.305263] (1)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 10771616 > 8ms
<7>[185471.305307] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[185471.309717] (0)[112:zygote] fork [2637:zygote]
<7>[185471.310627] (1)[2637:zygote] fork [2638:zygote]
<7>[185471.310638] (0)[112:zygote] fork [2639:zygote]
<7>[185471.310709] (1)[2638:zygote] set proc[2638] name: ->[GC]
<7>[185471.310768] (0)[2639:zygote] set proc[2639] name: ->[ReferenceQueueD]
<7>[185471.311309] (0)[112:zygote] fork [2640:zygote]
<7>[185471.311384] (1)[2640:zygote] set proc[2640] name: ->[FinalizerDaemon]
<7>[185471.311688] (0)[112:zygote] fork [2641:zygote]
<7>[185471.311741] (0)[2641:zygote] set proc[2641] name: ->[FinalizerWatchd]
<7>[185471.311842] (1)[2637:zygote] fork [2642:zygote]
<7>[185471.311888] (1)[2642:zygote] set proc[2642] name: ->[Signal Catcher]
<7>[185471.315795] (1)[2637:zygote] fork [2643:zygote]
<7>[185471.316835] (0)[2643:zygote] set proc[2643] name: ->[Compiler]
<7>[185471.317734] (0)[2637:zygote] fork [2644:zygote]
<7>[185471.317920] (1)[2644:zygote] set proc[2644] name: ->[ReferenceQueueD]
<7>[185471.318254] (0)[2637:zygote] fork [2645:zygote]
<7>[185471.318311] (1)[2645:zygote] set proc[2645] name: ->[FinalizerDaemon]
<7>[185471.318580] (0)[2637:zygote] fork [2646:zygote]
<7>[185471.318643] (1)[2646:zygote] set proc[2646] name: ->[FinalizerWatchd]
<7>[185471.319520] (0)[2637:zygote] set proc[2637] name: ->[d.process.acore]
<7>[185471.322945] (1)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 14112461 > 8ms
<7>[185471.322979] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<3>[185471.323432] (0)**Cannot find HWE module**
<7>[185471.327363] (1)[2637:d.process.acore] fork [2647:d.process.acore]
<7>[185471.327569] (0)[2647:d.process.acore] set proc[2647] name: ->[Binder Thread #]
<7>[185471.328237] (0)[2647:Binder Thread #] fork [2648:Binder Thread #]
<7>[185471.328306] (0)[2648:Binder Thread #] set proc[2648] name: ->[Binder Thread #]
<7>[185471.328794] (1)[2637:d.process.acore] set proc[2637] name: ->[re-initialized>]
<7>[185471.336860] (1)[2637:re-initialized>] set proc[2637] name: ->[d.process.acore]
<7>[185471.338924] (0)WQ_WARN: cpu:4, proc:kworker/u:2, dur: 12186384 > 8ms
<7>[185471.338955] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<3>[185471.520049] (0)[WMT-IC][I]mt6620_patch_dwn:wmt_core: patch dwn:0 frag(43, 436) ok
<3>[185471.520114] (0)[WMT-IC][I]mt6620_sw_init:Not to check the patch validity
<3>[185471.520527] (0)[WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf142f48)
<3>[185471.525325] (0)[WMT-IC][I]mt6620_sw_init:init_coex ok
<6>[185471.525775] (0)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[185471.525789] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[185471.525801] (0)[STP] mtk_wcn_stp_assert:[I] set f/w assert (0)
<3>[185471.525811] (0)[WMT-IC][I]mt6620_sw_init:enable host STP-UART-FULL mode
<3>[185471.545350] (0)[WMT-IC][I]mt6620_sw_init:set fm mode (2) ok
<6>[185471.545364] (0)[STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[185471.545378] (0)[STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[185471.545390] (0)mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[185471.545398] (0)board_sdio_ctrl force off before on
<6>[185471.545406] (0)mtk_wcn_cmb_sdio_off (3)
<5>[185471.545523] (0)[Power/clkmgr] [freq_meter] data = 15494, freq = 196 MHz
<5>[185471.545622] (0)[Power/clkmgr] [freq_meter] data = 15494, freq = 196 MHz
<6>[185471.545639] (0)mtk_wcn_cmb_sdio_on (3)
<5>[185471.545749] (0)[Power/clkmgr] [freq_meter] data = 15494, freq = 196 MHz
<3>[185471.545767] (0)msdc3 -> USR Resume <- msdc_pm() : L<1674> PID<0x5f>
<7>[185471.555002] (0)[2637:d.process.acore] fork [2649:d.process.acore]
<7>[185471.555061] (1)[2649:d.process.acore] set proc[2649] name: ->[golauncher-load]
<3>[185471.563531] (1)msdc3 -> ================ <- msdc_set_mclk() : L<944> PID<0x3a4>
<3>[185471.563553] (1)msdc3 -> !!! Set<400KHz> Source<197000KHz> -> sclk<397KHz> DDR<0> mode<0> div<124> <- msdc_set_mclk() : L<946> PID<0x3a4>
<3>[185471.563569] (1)msdc3 -> ================ <- msdc_set_mclk() : L<947> PID<0x3a4>
<3>[185471.589312] (0)msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1742> PID<0x3a4>
<7>[185471.603819] (0)[2637:d.process.acore] fork [2650:d.process.acore]
<7>[185471.604152] (1)[2650:d.process.acore] set proc[2650] name: ->[SharedPreferenc]
<7>[185471.605874] (1)[2650:SharedPreferenc] exit
<3>[185471.610508] (0)msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<4054> PID<0x3a4>
<3>[185471.610545] (0)msdc3 -> ================ <- msdc_set_mclk() : L<944> PID<0x3a4>
<3>[185471.610562] (0)msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<946> PID<0x3a4>
<3>[185471.610577] (0)msdc3 -> ================ <- msdc_set_mclk() : L<947> PID<0x3a4>
<6>[185471.611824] (0)mmc2: new high speed SDIO card at address 0001
<6>[185471.613776] (0)[WMT-DFT][I]hif_sdio_probe:start!
<6>[185471.613791] (0)[WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x20a) num(0x1)
<6>[185471.613802] (0)[WMT-DFT][I]hif_sdio_probe:card->info[0]: MediaTek MT6620 Wireless Combo Chip
<6>[185471.613812] (0)[WMT-DFT][I]hif_sdio_probe:card->info[1]:
<6>[185471.613821] (0)[WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[185471.613945] (0)[WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(524288)
<7>[185471.613985] (0)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 67268539 > 8ms
<7>[185471.614003] (0)work: mmc_rescan+0x0/0x324
<7>[185471.621954] (0)[2637:d.process.acore] fork [2651:d.process.acore]
<7>[185471.622006] (1)[2651:d.process.acore] set proc[2651] name: ->[SharedPreferenc]
<7>[185471.622477] (1)[2651:SharedPreferenc] exit
<7>[185471.653468] (0)WQ_WARN: cpu:0, proc:kworker/0:1, dur: 310067539 > 8ms
<7>[185471.653496] (0)work: thermal_zone_device_check+0x0/0x18
<6>[185471.703382] (0)[WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[185471.703795] (1)[2:kthreadd] fork [2652:kthreadd]
<6>[185471.703847] (0)[WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<4>[185471.703859] (1)[RT_MONITOR]WARNNING [2652:ksdioirqd/mmc2] SET NOT ALLOW RT Prio [1] for proc [2652:ksdioirqd/mmc2]
<5>[185471.703906] (0)[wlan] net_device prDev(0xcb590000) allocated
<5>[185471.711207] (0)[wlan] Open FW image: WIFI_RAM_CODE done
<5>[185471.717375] (0)[wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[185471.717500] (0)[wlan] Virtual Address = dee1f000 for COMMON MGMT MEMORY POOL.
<5>[185471.717677] (0)[wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[185471.717720] (0)[wlan] Virtual Address = dee21000 for SW_RFB_T.
<5>[185471.717736] (0)[wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[185471.717759] (0)[wlan] Virtual Address = dee25000 for MSDU_INFO_T.
<6>[185471.717776] (0)[wlan] wlanAdapterStart(): Acquiring LP-OWN
<6>[185471.733439] (0)[wlan] Chip ID: 0x6620
<6>[185471.733455] (0)[wlan] Revision ID: 0x1
<5>[185472.048501] (0)[DISP/DSI] DSI_set_cmdq_V2. DSI_CMDQ+0000 : 0x00062902
<5>[185472.048523] (0)[DISP/DSI] DSI_set_cmdq_V2. DSI_CMDQ+0004 : 0x52aa55f0
<5>[185472.048537] (0)[DISP/DSI] DSI_set_cmdq_V2. DSI_CMDQ+0008 : 0x00000108
<4>[185472.063414] (0)[lcm_esd_check], vcom is 0,4e-----------------------------------------
<3>[185472.373483] (0)[WMT-DEV][I]wmt_dev_tra_sdio_poll:**poll_during_time = 6790150 > 3000, sdio_during_count = 2020 > 200, query
<3>[185472.373501] (0)[WMT-DEV][I]wmt_dev_tm_temp_query:sdio traffic , we must query temperature..
<6>[185472.394112] (0)[wlan] wlanAdapterStart(): Waiting for Ready bit..
<5>[185472.720302] (0)[Power/Alarm] alarm_timer_triggered type 3 at 521748.309023635 (1)
<5>[185472.720855] (0)[Power/Alarm] alarm 3 set 523091.497000000
<5>[185472.721614] (0)[Power/Alarm] alarm wait (0x0)
<5>[185472.724736] (0)[Power/Alarm] alarm 3 set 521808.310000000
<7>[185472.758928] (0)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 10279692 > 8ms
<7>[185472.758960] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<6>[185472.773407] (0)[wlan] Ready bit asserted
<7>[185472.775505] (0)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 9503538 > 8ms
<7>[185472.775534] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<5>[185472.800116] (0)[wlan] [wifi] wlan%d netif_carrier_off
<6>[185472.800149] (0)[wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[185472.800202] (0)[wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[185472.800322] (0)[wlan] Domain: map=0, idx=0, code=0x4555
<7>[185472.800944] (1)[2:kthreadd] fork [2653:kthreadd]
<5>[185472.802494] (1)[wlan] tx_thread starts running...
<6>[185472.814909] (0)[WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(20a) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[185472.814925] (0)[WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[185472.814945] (0)[WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 coredump:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[185472.814992] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<3>[185472.815035] (0)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<4>[185472.815235] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<4>[185472.815782] (1)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<7>[185472.816888] (0)[2635:loadDriverThrea] exit
<4>[185472.817268] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<4>[185472.817299] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<4>[185472.817324] (0)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<4>[185472.817700] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<4>[185472.817724] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<4>[185472.817747] (0)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<4>[185472.818062] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<4>[185472.818087] (0)[STP-PSM] [I]_stp_psm_put_op: opId(0) enqueue
<3>[185472.818102] (0)[WMT-DEV][I]wmt_dev_tm_temp_query:[Thermal] current_temp = 0x2b
<7>[185472.818129] (0)WQ_WARN: cpu:0, proc:kworker/0:1, dur: 444655539 > 8ms
<7>[185472.818151] (0)work: thermal_zone_device_check+0x0/0x18
<4>[185472.818182] (0)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<3>[185472.818279] (0)[WMT-CORE][I]opfunc_pwr_sv:**** Send sleep command
<3>[185472.818570] (0)[WMT-CORE][I]opfunc_pwr_sv:Send sleep command OK!
<3>[185472.818585] (0)[WMT-CORE][I]opfunc_pwr_sv:Do STP-CB! 0 bf12d66c
<6>[185472.818617] (0)src = COMBO_IF_UART, to enter deep idle? 1
<7>[185472.868720] (1)[932:kworker/u:3] fork [2654:kworker/u:3]
<7>[185472.868775] (1)[2654:kworker/u:3] fork [2655:kworker/u:3]
<7>[185472.871084] (0)[2655:kworker/u:3] exit
<7>[185472.871116] (0)[2655:kworker/u:3] sig 17 to [2654:kworker/u:3]
<7>[185472.876093] (0)[2654:kworker/u:3] exit
<6>[185472.888224] (0)[RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[185472.888248] (0)ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[185472.903928] (0)WQ_WARN: cpu:0, proc:kworker/0:1, dur: 15580308 > 8ms
<7>[185472.904048] (0)work: wlanSetMulticastListWorkQueue+0x0/0x1f4 [wlan]
<5>[185472.904651] (1)init: starting `wpa_supplicant`
<7>[185472.909958] (1)[1:init] fork [2656:init]
<7>[185472.911364] (1)[324:WifiStateMachin] fork [2657:WifiStateMachin]
<7>[185472.911501] (1)[2657:WifiStateMachin] set proc[2657] name: ->[WifiMonitor]
<7>[185472.926727] (1)[2656:init] set proc[2656] name: ->[logwrapper]
<3>[185472.927421] (0)**Cannot find HWE module**
<7>[185472.929204] (1)[2656:logwrapper] fork [2658:logwrapper]
<7>[185472.947546] (1)[2658:logwrapper] set proc[2658] name: ->[wpa_supplicant]
<7>[185472.963358] (0)WQ_WARN: cpu:0, proc:kworker/0:3, dur: 309983692 > 8ms
<7>[185472.963395] (0)work: thermal_zone_device_check+0x0/0x18
<5>[185473.073648] (0)[wlan] N=0 closed
<5>[185473.073672] (0)[wlan] EVENT-ROAMING ABORT: Current Time = 175747230
<5>[185473.073687] (0)[wlan] [13] TRANSITION: [0] -> [0]
<6>[185473.074909] (0)[wlan] NAF=0,0,0
<6>[185473.075101] (0)[wlan] NAF=0,0,0
<5>[185473.444563] (0)[wlan] [13] TRANSITION: [0] -> [2]
<7>[185473.562713] (0)[2624:com.specdevice] exit
<5>[185473.646741] (1)[wlan] [13] TRANSITION: [2] -> [0]
<6>[185473.649736] (0)[wlan] NAF=0,0,0
<7>[185473.696146] (1)[2637:d.process.acore] fork [2659:d.process.acore]
<7>[185473.696191] (1)[2659:d.process.acore] set proc[2659] name: ->[Timer-0]
<0>[185473.921383] (0)[LED]button-backlight:0
<4>[185473.921429] (0)mt65xx_leds_set_cust: set brightness, name:button-backlight, mode:3, level:0
<0>[185473.921474] (0)[LED]PMIC#0:0
<6>[185473.921511] (0)[Power/PMIC] [hwBacklightKPLEDTurnOff]...........
<3>[185473.974836] (0)**Cannot find HWE module**
<3>[185473.987121] (0)**Cannot find HWE module**
<7>[185474.015287] (1)[2631:AsyncTask #2] fork [2660:AsyncTask #2]
<7>[185474.018980] (0)[2660:AsyncTask #2] set proc[2660] name: ->[dmesg]

# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IMM76D
ro.build.display.id=SLPA.ICS
ro.build.version.incremental=vDCH-0
ro.custom.build.version=vDCH-0
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=Sat May 11 15:13:04 CST 2013
ro.build.date.utc=1368256384
ro.build.type=user
ro.build.user=zxliu
ro.build.host=aclgcl-ubnt243
ro.build.tags=release-keys
ro.product.model=ALCATEL ONE TOUCH 992D
ro.product.brand=TCT
ro.product.name=Martell_lite
ro.product.device=Martell_lite_GSM
ro.product.board=Martell_lite
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=TCT
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=Martell_lite_GSM
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=Martell_lite-user 4.0.4 IMM76D vDCH-0 release-keys
ro.build.fingerprint=TCT/Martell_lite/Martell_lite_GSM:4.0.4/IMM76D/vDCH-0:user/release-keys
ro.build.flavor=
ro.build.characteristics=default
# end build properties
ro.product.display.model=ALCATEL ONE TOUCH 992D
#
#jrd sys properties
#
A51.supported.for.perso=true
A52.supported.for.perso=false
gsm.stk.perso.app_title=Mis Servicios
A53.supported.for.perso=true
Modem.FD.supported.for.perso=true
Def.shuttersound.enable=true
AMRWB.GSM.supported.for.perso=false
AMRWB.UMTS.supported.for.perso=true
ro.config.switch_on=bootaudio.mp3
ro.config.switch_off=shutaudio.mp3
ro.config.key_switch_on_off=1
ro.def.screen.brightness=100
ro.def.screen.brightness.mode=manual
ro.def.software.version=010 01
ro.com.android.dataroaming=false
ro.com.android.dataroaming2=false
ro.def.auto-rotation=false
qemu.hw.mainkeys=1
ro.config.alarm_alert=Sober.ogg
ro.com.google.clientidbase=android-alcatel
ro.com.google.clientidbase.am=android-alcatel
ro.com.google.clientidbase.ms=android-alcatel
ro.com.google.clientidbase.gmm=android-alcatel
ro.com.google.clientidbase.yt=android-alcatel
ro.setupwizard.mode=DISABLED
Def.PhoneVibrator.enable=true
gsm.version.baseband=6180
persist.adb.notify=1
persist.service.adb.enable=1
ro.power.key.default.behavior=1
ro_config_phnum_significant_len=7
ro.mobile_data_enable=1
def_show_on_map_hide=0
def.dualmic.display.enabled=false
def.dualmic.enabled=false
ro.music.lyrics.enable=1
ro.bluetooth.default.name=
ro.srs.audio.effect.enable=true
ro.update.cfi.for.all=false
ro.audio.parameters.config=0
ro.ringer_volume_general=5
ro.ringer_volume_meeting=1
ro.ringer_volume_outdoor=7
ro.notification_volume_general=5
ro.notification_volume_meeting=1
ro.notification_volume_outdoor=7
ro.alarm_volume_general=5
ro.alarm_volume_meeting=1
ro.alarm_volume_outdoor=7
ro.vibration_general=true
ro.vibration_silent=true
ro.vibration_meeting=true
ro.vibration_outdoor=true
ro.screen_touch_tone_general=true
ro.screen_touch_tone_meeting=false
ro.screen_touch_tone_outdoor=true
ro.sound_effect_general=true
ro.sound_effect_meeting=false
ro.sound_effect_outdoor=true
ro.haptic_feedback_general=true
ro.haptic_feedback_silent=false
ro.haptic_feedback_meeting=false
ro.haptic_feedback_outdoor=true
ro.lock_screen_general=true
ro.lock_screen_meeting=false
ro.lock_screen_outdoor=true
ro.product.locale.language=uk
ro.product.locale.region=UA
persist.sys.sd.defaultpath=/mnt/sdcard
ro.def.software.svn=01001
ro.config.message_ringtone=Wood.ogg
ro.sendemptysms.enable=true
Modem.Manufacture.for.perso=ALCATEL
Modem.Model.for.perso=ONE TOUCH 992D
ro.drm.enable=true
ro.oma.cp.authen_mandatory=true
ro.operator.name=
persist.sys.timezone=Europe/Amsterdam
def_search_engine=google
def_search_website=http://www.baidu.com/s?wd=
ecc_list_for_peso=
ro_default_emergency_number=
ro_headset_sound_mode=1
# begin mediatek build properties
ro.mediatek.version.release=ALPS.ICS2.6577.SP.V1.20120605
ro.mediatek.platform=MT6577
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.ICS2.6577.SP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=128m
# Encrypt phone function
ro.crypto.tmpfs_options=mode=0771,uid=1000,gid=1000
ro.crypto.fs_type=ext4
ro.crypto.fs_real_blkdev=/emmc@usrdata
ro.crypto.fs_mnt_point=/data
ro.crypto.fs_options=noauto_da_alloc
ro.crypto.fs_flags=0x00000406
# USB MTP WHQL
ro.sys.usb.mtp.whql.enable=0
# Power off opt in IPO
sys.ipo.pwrdncap=2
ro.sys.usb.storage.type=mtp,mass_storage
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.sf.hwrotation=0
ril.current.share_modem=2
launcherplus.allappsgrid=2d
launcher2.allappsgrid=3d_20
curlockscreen=2
ro.mediatek.gemini_support=true
drm.service.enabled=true
fmradio.driver.enable=1
dalvik.vm.mtk-stack-trace-file=/data/anr/mtk_traces.txt
ro.config.notification_sound=Shimmer.ogg
ro.config.alarm_alert=Sober.ogg
ro.config.ringtone=Buoy.ogg
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt

wlan 286092 0 - Live 0xbf1fd000 (P)
cfg80211 121452 0 - Live 0xbf1d4000
mtk_fm_priv 8917 0 - Live 0xbf1ce000 (P)
mt6620_fm_drv 112549 1 mtk_fm_priv, Live 0xbf1a6000
mtk_stp_bt 39862 0 - Live 0xbf199000
mtk_stp_gps 37318 0 - Live 0xbf18c000
mtk_stp_uart 21601 0 - Live 0xbf183000 (P)
mtk_stp_wmt 375916 7 wlan,mtk_fm_priv,mt6620_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf119000 (P)
mtk_hif_sdio 18777 2 wlan,mtk_stp_wmt, Live 0xbf110000
devinfo 840 0 - Live 0xbf10c000 (P)
devapc 4557 0 - Live 0xbf107000 (P)
sec 90381 0 - Live 0xbf0ea000 (P)
vcodec_kernel_driver 28294 2 - Live 0xbf0de000 (P)
m4u 112944 8 - Live 0xbf0b9000 (P)
ccmni 17062 0 - Live 0xbf0b0000 (P)
ccci 116968 15 ccmni, Live 0xbf088000 (P)
ccci_plat 126142 2 ccmni,ccci, Live 0xbf060000 (P)
mtk_drvb_77 6085 0 - Live 0xbf05b000 (P)
mtklfb 23534 0 - Live 0xbf051000
pvrsrvkm 233713 115 mtklfb, Live 0xbf009000
aed 16252 3 - Live 0xbf000000 (P)

RAM: 512 MB (486 MB available)

System RAM: 486.000MB
mtkfb.0: 4.000MB


Flash: 4 GB (3.566 GB actual); 16 GB (14.837 GB actual)

mmcblk0: 3.566 GB
mmcblk1: 14.837 GB


触摸屏为 TCT ALCATEL ONE TOUCH 992D

$39.14 BAILEY 1PC 70mm TCT Through Hole Drill Bits Woodworking Tool CNC Router Hole Making Boring Drill Head Power Tools Accessories

$3.63 1pc 12-160mm TCT Carbide Hole Saw Drill Bit Hole Saw Cutter For Stainless Steel Metal Alloy Wood Drilling

$28.86 Carbide Tip TCT Drill Bit Hole Saw 12-200mm Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling Cutting Kit

$189.18 12Pcs15-50mm Alloy Hole Saw Set Carbide Tip TCT Metal Cutter Core Drill Bit Kits for Stainless Steel Metal Drilling Crown

$3.68 1 pc 5A Carbide Tip TCT Drill Bit Hole Saw 12-150mm Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling

$3.71 12-300mm TCT Hole Saw Tungsten Carbide Tipped Core Drill Bit Cobalt Cutter Tools For Stainless Steel Plate Iron Metal PVC Opener

$36.69 TCT Hole Saw Carbide Tipped Hole Cutter With Titanium-Plated Pilot Drill Bit For Metal Stainless Steel Iron And Wood Hole Saw

$29 1Pc 15-100mm TCT Hole Saw Carbide Tip Core Drill Bit Cutter Drilling crown for metal Stainless Steel Alloy

$31.34 TCT Hole Saw 12-127mm Hard Alloy Extended Hole Saw Stainless Steel Metal Iron Wood Metal Cutting Kit Tungsten Steel Cutting Tool

$3.39 1 pc 5A Carbide Tip TCT Drill Bit Hole Saw 12-150mm Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling

$3.74 12-150mm TCT Hole Saw Tungsten Carbide Drill Bits Cobalt Cutter Stainless Steel Plate Iron Metal Driiling Cutting

$171.95 10Pcs16-53mm Alloy Hole Saw Set Carbide Tip TCT Metal Cutter Core Drill Bit Kits for Stainless Steel Metal Drilling Crown

$210.35 6pcs 16-32mm Drilling Crown For Stainless Steel TCT Hole Saw Set Tungsten Carbide Tipped Drill Bits For Metal Alloy iron

$34.67 BAILEY 1PC TCT Dowel Drill Bits Woodworking Drilling Bit CNC Router Bit 5-8mm Hole Making Boring 70/57mm Length Hard Metal Drill

$35.73 12-100mm TCT Hole Saw Tungsten Carbide Tipped Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling

$194.83 8PCS 16-35mm TCT Hole Saw Cutter Alloy Hole Saw Set Carbide Tip For Stainless Steel Iron Plate Metalworking Drilling Crown

$44.39 1PC TCT Hole Opener 12-55mm 6.35mm MAX handle Alloy Hole Saw Stainless Steel Metal Wall Cutting Kit Tungsten Steel Cutting Tool

$5.98 12.7mm 3 Flutes TCT Trimming Straight Bit Milling Cutter For MDF Plywood Chipboard Hard Wood Drill Engraving Router Bit Endmill

$2.64 HUHAO 5A TCT Hole Saw Drill Bit Tungsten Carbide Tipped Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling

$203.95 6PCS 16-35mm TCT Hole Saw Cutter Alloy Hole Saw Set Carbide Tip For Stainless Steel Iron Plate Metalworking Drilling Crown

新电池 TCT ALCATEL ONE TOUCH 992D

$189.18 12Pcs15-50mm Alloy Hole Saw Set Carbide Tip TCT Metal Cutter Core Drill Bit Kits for Stainless Steel Metal Drilling Crown

$28.86 Carbide Tip TCT Drill Bit Hole Saw 12-200mm Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling Cutting Kit

$39.14 BAILEY 1PC 70mm TCT Through Hole Drill Bits Woodworking Tool CNC Router Hole Making Boring Drill Head Power Tools Accessories

$3.63 1pc 12-160mm TCT Carbide Hole Saw Drill Bit Hole Saw Cutter For Stainless Steel Metal Alloy Wood Drilling

$3.71 12-300mm TCT Hole Saw Tungsten Carbide Tipped Core Drill Bit Cobalt Cutter Tools For Stainless Steel Plate Iron Metal PVC Opener

$29 1Pc 15-100mm TCT Hole Saw Carbide Tip Core Drill Bit Cutter Drilling crown for metal Stainless Steel Alloy

$3.68 1 pc 5A Carbide Tip TCT Drill Bit Hole Saw 12-150mm Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling

$36.69 TCT Hole Saw Carbide Tipped Hole Cutter With Titanium-Plated Pilot Drill Bit For Metal Stainless Steel Iron And Wood Hole Saw

$31.34 TCT Hole Saw 12-127mm Hard Alloy Extended Hole Saw Stainless Steel Metal Iron Wood Metal Cutting Kit Tungsten Steel Cutting Tool

$3.39 1 pc 5A Carbide Tip TCT Drill Bit Hole Saw 12-150mm Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling

$171.95 10Pcs16-53mm Alloy Hole Saw Set Carbide Tip TCT Metal Cutter Core Drill Bit Kits for Stainless Steel Metal Drilling Crown

$3.74 12-150mm TCT Hole Saw Tungsten Carbide Drill Bits Cobalt Cutter Stainless Steel Plate Iron Metal Driiling Cutting

$210.35 6pcs 16-32mm Drilling Crown For Stainless Steel TCT Hole Saw Set Tungsten Carbide Tipped Drill Bits For Metal Alloy iron

$34.67 BAILEY 1PC TCT Dowel Drill Bits Woodworking Drilling Bit CNC Router Bit 5-8mm Hole Making Boring 70/57mm Length Hard Metal Drill

$35.73 12-100mm TCT Hole Saw Tungsten Carbide Tipped Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling

$194.83 8PCS 16-35mm TCT Hole Saw Cutter Alloy Hole Saw Set Carbide Tip For Stainless Steel Iron Plate Metalworking Drilling Crown

$44.39 1PC TCT Hole Opener 12-55mm 6.35mm MAX handle Alloy Hole Saw Stainless Steel Metal Wall Cutting Kit Tungsten Steel Cutting Tool

$2.64 HUHAO 5A TCT Hole Saw Drill Bit Tungsten Carbide Tipped Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling

$203.95 6PCS 16-35mm TCT Hole Saw Cutter Alloy Hole Saw Set Carbide Tip For Stainless Steel Iron Plate Metalworking Drilling Crown

$5.98 12.7mm 3 Flutes TCT Trimming Straight Bit Milling Cutter For MDF Plywood Chipboard Hard Wood Drill Engraving Router Bit Endmill

占地面积 TCT ALCATEL ONE TOUCH 992D

$3.63 1pc 12-160mm TCT Carbide Hole Saw Drill Bit Hole Saw Cutter For Stainless Steel Metal Alloy Wood Drilling

$39.14 BAILEY 1PC 70mm TCT Through Hole Drill Bits Woodworking Tool CNC Router Hole Making Boring Drill Head Power Tools Accessories

$28.86 Carbide Tip TCT Drill Bit Hole Saw 12-200mm Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling Cutting Kit

$189.18 12Pcs15-50mm Alloy Hole Saw Set Carbide Tip TCT Metal Cutter Core Drill Bit Kits for Stainless Steel Metal Drilling Crown

$3.71 12-300mm TCT Hole Saw Tungsten Carbide Tipped Core Drill Bit Cobalt Cutter Tools For Stainless Steel Plate Iron Metal PVC Opener

$3.68 1 pc 5A Carbide Tip TCT Drill Bit Hole Saw 12-150mm Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling

$36.69 TCT Hole Saw Carbide Tipped Hole Cutter With Titanium-Plated Pilot Drill Bit For Metal Stainless Steel Iron And Wood Hole Saw

$29 1Pc 15-100mm TCT Hole Saw Carbide Tip Core Drill Bit Cutter Drilling crown for metal Stainless Steel Alloy

$31.34 TCT Hole Saw 12-127mm Hard Alloy Extended Hole Saw Stainless Steel Metal Iron Wood Metal Cutting Kit Tungsten Steel Cutting Tool

$3.74 12-150mm TCT Hole Saw Tungsten Carbide Drill Bits Cobalt Cutter Stainless Steel Plate Iron Metal Driiling Cutting

$171.95 10Pcs16-53mm Alloy Hole Saw Set Carbide Tip TCT Metal Cutter Core Drill Bit Kits for Stainless Steel Metal Drilling Crown

$3.39 1 pc 5A Carbide Tip TCT Drill Bit Hole Saw 12-150mm Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling

$210.35 6pcs 16-32mm Drilling Crown For Stainless Steel TCT Hole Saw Set Tungsten Carbide Tipped Drill Bits For Metal Alloy iron

$35.73 12-100mm TCT Hole Saw Tungsten Carbide Tipped Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling

$34.67 BAILEY 1PC TCT Dowel Drill Bits Woodworking Drilling Bit CNC Router Bit 5-8mm Hole Making Boring 70/57mm Length Hard Metal Drill

$194.83 8PCS 16-35mm TCT Hole Saw Cutter Alloy Hole Saw Set Carbide Tip For Stainless Steel Iron Plate Metalworking Drilling Crown

$44.39 1PC TCT Hole Opener 12-55mm 6.35mm MAX handle Alloy Hole Saw Stainless Steel Metal Wall Cutting Kit Tungsten Steel Cutting Tool

$203.95 6PCS 16-35mm TCT Hole Saw Cutter Alloy Hole Saw Set Carbide Tip For Stainless Steel Iron Plate Metalworking Drilling Crown

$5.98 12.7mm 3 Flutes TCT Trimming Straight Bit Milling Cutter For MDF Plywood Chipboard Hard Wood Drill Engraving Router Bit Endmill

$2.64 HUHAO 5A TCT Hole Saw Drill Bit Tungsten Carbide Tipped Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling

Find Similar devices
Same CPU:
Same Display resolution:
Same ro.build.description:

NEW: 查看完整数据库 >>

的最新:

alps 8227L_demo
alps G15 Pro Max
HUAWEI JAT-LX1
alps A73
MStar Semiconductor, Inc. MStar Android TV
NOA M702
DW Pad6 Pro
JPay Inc. JP5s Media Device
samsung SM-T561
PAYJOY admin http://www.specdevice.com/showspec.php?id=1867-a11f-0033-c5870033c587
TECNO LG6n
alps Mipad
alps Edge 30 Pro
alps S23 Ultra+
DW P60 Pro
Allwinner QUAD-CORE T3 P1
alps YT5760D
HUAWEI MAR-LX1A
alps A73s
XSD 14Pro
XSD 14Pro
sprd s9863a1h10_Natv
rockchip rk3399-all
alps S23 Ultra+
Pad_6s_Pro
alps Mipad
unknown Phh-Treble Go
JHZL Y700-Y800
Xiaomi 23106RN0DA
welcome POVA 5 Pro
FUHU NABI2-NV7A
Proscan PLT7044K
Samsung GT-P7500
Barnes & Noble BN NookHD+
samsung SM-T550
samsung SAMSUNG-SM-G800A
TCL 5027B
Samsung GT-I9152
samsung SM-G973U
samsung SM-G781V
Galaxy A55
lingbo pad a20
samsung SM-N981U
Venus Pad16
asus K013
Vortex ZG65 Pro
alps S24 Ultra
alps ZQ8003
INFINIX Infinix X665E
alps Mipad