1. Install SpecDevice
2. Run and decode your specs
3. Get your link (read more...)
| General Specifications | |
|---|---|
| Manufacturer | A-gold |
| Model | S3_Pro |
| Firmware | 9; root.20190522.134445; SDK28 |
| CPU | 8 cores; AArch64 Processor rev 2 (aarch64); Max: 1989.0 MHz; Min: 793.0 MHz |
| Display | 2340 x 1080; DPI: 508; Evaluated Size: 5.1" |
| Touch screen | Multitouch 10 points |
| GPU | Mali-G72 MP3; ARM; OpenGL ES-CM 1.1 v1.r14p0-01rel0.01e5c7ea2a98fd18e15a3ddbd079d568; OpenGL ES 3.2 v1.r14p0-01rel0.01e5c7ea2a98fd18e15a3ddbd079d568 |
| RAM | 0 MB |
| Flash | 1.000 GB; 128 GB (116.480 GB actual); 183.346 GB (see memory map tab) |
| Communications | |
| Phone | GSM |
| WiFi | wlan_drv_gen3 |
| USB Host | Yes |
| Bluetooth | Yes |
| GPS | Yes |
| Advanced Features | |
| Front camera | Photo: 48.0 MP; Max: 8000x6000; Video: 2.1 MP; Max: 1920x1080; Focus: auto macro continuous-video continuous-picture; Flash modes: off auto on torch |
| Back camera | Photo: 19.7 MP; Max size: 5120x3840; Video: 2.1 MP; Max: 1920x1080; Focus: fixed; No flash |
| Sensors | ACCELEROMETER (MTK); range: 0...78.453; resolution: 0.001 (0.002%); power: 0.001mA; |
| MAGNETOMETER (MTK); range: 0...4912; resolution: 0.15 (0.003%); power: 0.001mA; | |
| GYROSCOPE (MTK); range: 0...34.907; resolution: 0.001 (0.003%); power: 0.001mA; | |
| LIGHT (MTK); range: 0...65535; resolution: 1 (0.002%); power: 0.001mA; | |
| PROXIMITY (MTK); range: 0...1; resolution: 1 (100%); power: 0.001mA; | |
| GRAVITY (MTK); range: 0...39.227; resolution: 0.001 (0.003%); power: 0.001mA; | |
| LINEARACCEL (MTK); range: 0...39.227; resolution: 0.001 (0.003%); power: 0.001mA; | |
| ROTATION_VECTOR (MTK); range: 0...1; resolution: 0 (0%); power: 0.001mA; | |
| Vibrator | Yes |
| Supported languages | 204; Afrikaans; Aghem; Akan; Amharic; Arabic; Assamese; Asu; Asturian; Azerbaijani; Basaa; Belarusian; Bemba; Bena; Bulgarian; Bambara; Bangla; Tibetan; Breton; Bodo; Bosnian; Catalan; Chakma; Chechen; Chiga; Cherokee; Central Kurdish; Czech; Welsh; Danish; Taita; German; Zarma; Dogri; Lower Sorbian; Duala; Jola-Fonyi; Dzongkha; Embu; Ewe; Greek; English; Esperanto; Spanish; Estonian; Basque; Ewondo; Persian; Fulah; Finnish; Filipino; Faroese; French; Friulian; Western Frisian; Irish; Scottish Gaelic; Galician; Swiss German; Gujarati; Gusii; Manx; Hausa; Hawaiian; Hebrew; Hindi; Croatian; Upper Sorbian; Hungarian; Armenian; Indonesian; Igbo; Sichuan Yi; Icelandic; Italian; Japanese; Ngomba; Machame; Georgian; Kabyle; Kamba; Makonde; Kabuverdianu; Koyra Chiini; Kikuyu; Kazakh; Kako; Kalaallisut; Kalenjin; Khmer; Kannada; Korean; Konkani; Kashmiri; Shambala; Bafia; Colognian; Kashmiri Devanagari; Cornish; Kyrgyz; Langi; Luxembourgish; Ganda; Lakota; Lingala; Lao; Northern Luri; Lithuanian; Luba-Katanga; Luo; Luyia; Latvian; Maithili; Masai; Meru; Morisyen; Malagasy; Makhuwa-Meetto; Metaʼ; Macedonian; Malayalam; Mongolian; Manipuri; Marathi; Malay; Maltese; Mundang; Burmese; Mazanderani; Nama; Norwegian; North Ndebele; Low German; Nepali; Dutch; Kwasio; Norwegian; Ngiemboon; Nuer; Nyankole; Oromo; Odia; Ossetic; Punjabi; Polish; Pashto; Portuguese; Quechua; Romansh; Rundi; Romanian; Rombo; Russian; Kinyarwanda; Rwa; Sanskrit; Sakha; Samburu; Santali; Sangu; Sindhi; Sindhi Devanagari; Northern Sami; Sena; Koyraboro Senni; Sango; Tachelhit; Sinhala; Slovak; Slovenian; Inari Sami; Shona; Somali; Albanian; Serbian; Swedish; Swahili; Tamil; Telugu; Teso; Tajik; Thai; Tigrinya; Tongan; Turkish; Tatar; Tasawaq; Central Atlas Tamazight; Uyghur; Ukrainian; Urdu; Uzbek; Vai; Vietnamese; Vunjo; Walser; Wolof; Soga; Yangben; Yiddish; Yoruba; Cantonese; Standard Moroccan Tamazight; Chinese; Zulu |
| Battery | Technology: Li-poly; Voltage: 4382 |
| Owner's comment: | UMIDIGI S3 Pro |
| SD Version: | 1.1 7 |
KERNEL: Linux version 4.4.146 (root@android-System-Product-Name) (Android (4691093 based on r316199) clang version 6.0.2 (https://android.googlesource.com/toolchain/clang 183abd29fc496f55536e7d904e0abae47888fc7f) (https://android.googlesource.com/toolchain/llvm 34361f192e41ed6e4e8f9aca80a4ea7e9856f327) (based on LLVM 6.0.2svn)) #13 SMP PREEMPT Fri Aug 16 15:44:56 CST 2019
CODENAME: REL
Mainboard: g38v71c2k_kw_s3_pro
BRAND: UMIDIGI
CPU_ABI: arm64-v8a
CPU_ABI2:
DEVICE: S3_Pro
DISPLAY: UMIDIGI_S3_Pro_V1.0_20190522
FINGERPRINT: UMIDIGI/S3_Pro/S3_Pro:9/PPR1.180610.011/root.20190522.134445:user/release-keys
HARDWARE: mt6771
ID: PPR1.180610.011
TAGS: release-keys
Processor : AArch64 Processor rev 2 (aarch64)
processor : 0
BogoMIPS : 26.00
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
processor : 1
BogoMIPS : 26.00
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
processor : 2
BogoMIPS : 26.00
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
processor : 3
BogoMIPS : 26.00
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
processor : 4
BogoMIPS : 26.00
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x0
CPU part : 0xd09
CPU revision : 2
processor : 5
BogoMIPS : 26.00
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x0
CPU part : 0xd09
CPU revision : 2
processor : 6
BogoMIPS : 26.00
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x0
CPU part : 0xd09
CPU revision : 2
processor : 7
BogoMIPS : 26.00
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x0
CPU part : 0xd09
CPU revision : 2
Hardware : MT6771V/CT
GL_EXT_debug_marker
GL_ARM_rgba8
GL_ARM_mali_shader_binary
GL_OES_depth24
GL_OES_depth_texture
GL_OES_depth_texture_cube_map
GL_OES_packed_depth_stencil
GL_OES_rgb8_rgba8
GL_EXT_read_format_bgra
GL_OES_compressed_paletted_texture
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_standard_derivatives
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_EGL_image_external_essl3
GL_OES_EGL_sync
GL_OES_texture_npot
GL_OES_vertex_half_float
GL_OES_required_internalformat
GL_OES_vertex_array_object
GL_OES_mapbuffer
GL_EXT_texture_format_BGRA8888
GL_EXT_texture_rg
GL_EXT_texture_type_2_10_10_10_REV
GL_OES_fbo_render_mipmap
GL_OES_element_index_uint
GL_EXT_shadow_samplers
GL_OES_texture_compression_astc
GL_KHR_texture_compression_astc_ldr
GL_KHR_texture_compression_astc_hdr
GL_KHR_texture_compression_astc_sliced_3d
GL_KHR_debug
GL_EXT_occlusion_query_boolean
GL_EXT_disjoint_timer_query
GL_EXT_blend_minmax
GL_EXT_discard_framebuffer
GL_OES_get_program_binary
GL_OES_texture_3D
GL_EXT_texture_storage
GL_EXT_multisampled_render_to_texture
GL_EXT_multisampled_render_to_texture2
GL_OES_surfaceless_context
GL_OES_texture_stencil8
GL_EXT_shader_pixel_local_storage
GL_ARM_shader_framebuffer_fetch
GL_ARM_shader_framebuffer_fetch_depth_stencil
GL_ARM_mali_program_binary
GL_EXT_sRGB
GL_EXT_sRGB_write_control
GL_EXT_texture_sRGB_decode
GL_EXT_texture_sRGB_R8
GL_EXT_texture_sRGB_RG8
GL_KHR_blend_equation_advanced
GL_KHR_blend_equation_advanced_coherent
GL_OES_texture_storage_multisample_2d_array
GL_OES_shader_image_atomic
GL_EXT_robustness
GL_EXT_draw_buffers_indexed
GL_OES_draw_buffers_indexed
GL_EXT_texture_border_clamp
GL_OES_texture_border_clamp
GL_EXT_texture_cube_map_array
GL_OES_texture_cube_map_array
GL_OES_sample_variables
GL_OES_sample_shading
GL_OES_shader_multisample_interpolation
GL_EXT_shader_io_blocks
GL_OES_shader_io_blocks
GL_EXT_tessellation_shader
GL_OES_tessellation_shader
GL_EXT_primitive_bounding_box
GL_OES_primitive_bounding_box
GL_EXT_geometry_shader
GL_OES_geometry_shader
GL_ANDROID_extension_pack_es31a
GL_EXT_gpu_shader5
GL_OES_gpu_shader5
GL_EXT_texture_buffer
GL_OES_texture_buffer
GL_EXT_copy_image
GL_OES_copy_image
GL_EXT_shader_non_constant_global_initializers
GL_EXT_color_buffer_half_float
GL_EXT_color_buffer_float
GL_EXT_YUV_target
GL_OVR_multiview
GL_OVR_multiview2
GL_OVR_multiview_multisampled_render_to_texture
GL_KHR_robustness
GL_KHR_robust_buffer_access_behavior
GL_EXT_draw_elements_base_vertex
GL_OES_draw_elements_base_vertex
GL_EXT_protected_textures
GL_EXT_buffer_storage
GL_EXT_EGL_image_array
GL_EXT_texture_filter_anisotropic
[19259.200330] (0)[1:init]init: PropSet [wlan.driver.status]=[ok] Done
[19259.202992] (6)[19855:tx_thread]eLNA[5G]HG = 0
[19259.203652] (6)[19855:tx_thread]PwrLimit: num=0
[19259.203652]
[19259.203662] (6)[19855:tx_thread]SAR 0 63 63 63 63 63
[19259.203668] (6)[19855:tx_thread]
[19259.203668]
[19259.204257] (1)[30557:kworker/u16:1][Power/PPM] Shrink 2 PPM logs from last 545 ms!
[19259.204290] (1)[30557:kworker/u16:1][Power/PPM] (0x60)(12404)(0)(0-7)(15)(9)(4)(4) (15)(14)(4)(4)
[19259.210939] (0)[19153:kworker/0:0][Power/PPM] (0x60)(12404)(0)(0-7)(15)(0)(4)(4) (15)(0)(4)(4)
[19259.215395] (4)[7161:Binder:1374_1F]alarm_dev: alarm 2 set 27211.304000000
[19259.215422] (4)[7161:Binder:1374_1F]alarm_dev: alarm 3 set 27207.112000000
[19259.215442] (4)[7161:Binder:1374_1F]alarm_dev: alarm 2 set 27211.304000000
[19259.215450] (4)[7161:Binder:1374_1F]alarm_dev: alarm 3 set 27207.112000000
[19259.215698] (1)[1:init]init: Received control message `start` for `wpa_supplicant` from pid: 1305 (/system/bin/wificond)
[19259.216780] (1)[1:init]init: starting service `wpa_supplicant`...
[19259.218660] (4)[19864:init]init: Created socket `/dev/socket/wpa_wlan0`, mode 660, user 1010, group 1010
[19259.219870] (7)[7161:Binder:1374_1F]alarm_dev: alarm 2 set 27211.304000000
[19259.219897] (7)[7161:Binder:1374_1F]alarm_dev: alarm 3 set 27207.112000000
[19259.219928] (7)[7161:Binder:1374_1F]alarm_dev: alarm 2 set 27211.304000000
[19259.219934] (7)[7161:Binder:1374_1F]alarm_dev: alarm 3 set 27207.112000000
[19259.222252] (6)[4205:Binder:1374_18]alarm_dev: alarm 2 set 27211.304000000
[19259.222281] (6)[4205:Binder:1374_18]alarm_dev: alarm 3 set 27207.112000000
[19259.222966] (4)[19856:hif_thread][wlan]nicpmSetDriverOwn:(NIC INFO) DRIVER OWN, status=1 count=6
[19259.223009] (4)[19856:hif_thread][wlan]nicpmSetFWOwn:(NIC INFO) FW OWN Failed due to pending INT
[19259.229258] (6)[3485:Binder:1374_11]alarm_dev: alarm 2 set 27211.304000000
[19259.229282] (6)[3485:Binder:1374_11]alarm_dev: alarm 3 set 27207.112000000
[19259.270493] (5)[1:init]init: Untracked pid 19875 exited with status 0
[19259.286013] (0)[3827:Binder:1374_15]alarm_dev: alarm 2 set 27211.304000000
[19259.286054] (0)[3827:Binder:1374_15]alarm_dev: alarm 3 set 27207.112000000
[19259.286165] (0)[3827:Binder:1374_15]alarm_dev: alarm 2 set 27211.304000000
[19259.286174] (0)[3827:Binder:1374_15]alarm_dev: alarm 3 set 27207.112000000
[19259.321576] (4)[410:wifi@1.0-servic][MTK-WIFI] WIFI_open[I]: major 153 minor 0 (pid 410)
[19259.321604] (4)[410:wifi@1.0-servic][MTK-WIFI] WIFI_write[I]: WIFI_write STA, length 4
[19259.321644] (0)[19855:tx_thread][wlan]wlanoidSetP2pMode:(P2P INFO) Set P2P enable[1] mode[0]
[19259.321741] (0)[19855:tx_thread][wlan]p2pDevFsmStateTransition:(P2P STATE) [P2P_DEV]TRANSITION: [P2P_DEV_STATE_IDLE] -> [P2P_DEV_STATE_IDLE]
[19259.321773] (0)[19855:tx_thread][wlan]p2pRoleFsmStateTransition:(P2P STATE) [P2P_ROLE][0]TRANSITION: [P2P_ROLE_STATE_IDLE] -> [P2P_ROLE_STATE_IDLE]
[19259.321785] (0)[19855:tx_thread][wlan]p2pLaunch:(P2P INFO) Register p2p succeed
[19259.322437] (4)[410:wifi@1.0-servic][MTK-WIFI] WIFI_write[I]: Set wlan mode 0 --> 2
[19259.322459] (4)[410:wifi@1.0-servic][MTK-WIFI] WIFI_close[I]: major 153 minor 0 (pid 410)
[19259.322880] (5)[19855:tx_thread][wlan]wlanoidSet802dot11PowerSaveProfile:(OID INFO) Set AIS Network BSS(0) PS mode to CAM (0)
[19259.325003] (0)[410:wifi@1.0-servic]IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[19259.327412] (6)[19855:tx_thread]bssActivateCtrl 4 1 1 | 4 a2:8c:5d:dd:19:6f 0 | connection state: prev/cur 1/1
[19259.327569] (1)[19855:tx_thread]bssActivateCtrl 4 0 1 | 4 00:00:00:00:00:00 0 | connection state: prev/cur 1/1
[19259.327663] (1)[19855:tx_thread]bssActivateCtrl 1 1 1 | 2 a2:8c:5d:dd:19:6f 0 | connection state: prev/cur 1/1
[19259.327943] (6)[19855:tx_thread]CMD:[80:4:891141655][2:5:891141660][24:6:891141836][40:7:891141944][42:8:891141945][f:9:891141948][f:10:891141948][49:11:891141949][36:12:891141951][48:13:891141951]
[19259.328100] (6)[19855:tx_thread]CMD:[2:14:891141957][59:15:891141958][90:16:891141960][11:17:891146027][11:18:891146033][14:19:891146036][11:20:891146037][5:21:891146043][a:22:891146044][c1:23:891146044]
[19259.356557] (5)[19856:hif_thread][wlan]nicpmSetDriverOwn:(NIC INFO) DRIVER OWN, status=1 count=6
[19259.356773] (4)[1481:WifiStateMachin][wlan]priv_support_driver_cmd:(REQ INFO) priv_support_driver_cmd: driver cmd "set_fw_param alwaysscanen 1" on wlan0
[19259.356899] (7)[19855:tx_thread][wlan]wlanoidSetFwParam:(OID INFO) Fw Params: alwaysscanen 1
[19259.359490] (6)[19855:tx_thread]CFG: Command=alwaysscanen, value=1
[19259.359517] (6)[19855:tx_thread]EasyDbg apply 88 CMD_ALWAYSSCANEN_VALUE val 0x1
[19259.359517]
[19259.359733] (5)[68:conn-md-thread][CONN-MD-DFT][I]conn_md_log_print_msg:send message to Modem, 19259.030 19259.030 19259.184 19259.188 19259.359
[19259.363332] (5)[1481:WifiStateMachin][wlan]priv_support_driver_cmd:(REQ INFO) priv_support_driver_cmd: driver cmd "set_fw_param alwaysscanen 0" on wlan0
[19259.363377] (5)[19855:tx_thread][wlan]wlanoidSetFwParam:(OID INFO) Fw Params: alwaysscanen 0
[19259.366272] (5)[19855:tx_thread]CFG: Command=alwaysscanen, value=0
[19259.366296] (5)[19855:tx_thread]EasyDbg apply 88 CMD_ALWAYSSCANEN_VALUE val 0x0
[19259.366296]
[19259.373192] (6)[1:init]init: Received control message `stop` for `wpa_supplicant` from pid: 1305 (/system/bin/wificond)
[19259.373222] (6)[1:init]init: Sending signal 9 to service `wpa_supplicant` (pid 19864) process group...
[19259.378663] (4)[1:init]libprocessgroup: Successfully killed process cgroup uid 0 pid 19864 in 5ms
[19259.380037] (7)[1:init]init: Service `wpa_supplicant` (pid 19864) received signal 9
[19259.451577] (1)[398:composer@2.1-se][DISP][layering_rule_senario_decision #353]ERROR:test_by mtk_0
[19259.451599] (1)[398:composer@2.1-se][DISP][layering_rule_senario_decision #374]ERROR:test_by mtk_1
[19259.451606] (1)[398:composer@2.1-se][DISP][layering_rule_senario_decision #386]ERROR:test_by mtk_3
[19259.451613] (1)[398:composer@2.1-se][DISP][layering_rule_senario_decision #394]ERROR:test_by mtk_4,width=1080,height=2340
[19259.451618] (1)[398:composer@2.1-se][DISP][layering_rule_senario_decision #399]ERROR:test_by mtk_5
[19259.657179] (5)[361:logd.auditd]type=1400 audit(1592053162.806:4735): avc: denied { open } for pid=10578 comm=4173796E635461736B202338 path="/proc/partitions" dev="proc" ino=4026532139 scontext=u:r:untrusted_app_25:s0:c512,c768 tcontext=u:object_r:proc_partition:s0 tclass=file permissive=1
[19259.657217] (5)[361:logd.auditd]type=1400 audit(1592053163.866:4748): avc: denied { open } for pid=19859 comm="pool-5-thread-1" path="/dev/__properties__/u:object_r:mtk_em_tel_log_prop:s0" dev="tmpfs" ino=10408 scontext=u:r:untrusted_app_25:s0:c512,c768 tcontext=u:object_r:mtk_em_tel_log_prop:s0 tclass=file permissive=1
[19259.657636] (5)[361:logd.auditd]type=1400 audit(1592053163.866:4748): avc: denied { open } for pid=19859 comm="pool-5-thread-1" path="/dev/__properties__/u:object_r:mtk_em_tel_log_prop:s0" dev="tmpfs" ino=10408 scontext=u:r:untrusted_app_25:s0:c512,c768 tcontext=u:object_r:mtk_em_tel_log_prop:s0 tclass=file permissive=1
[19259.657658] (5)[361:logd.auditd]type=1400 audit(1592053163.866:4749): avc: denied { getattr } for pid=19859 comm="pool-5-thread-1" path="/dev/__properties__/u:object_r:mtk_em_tel_log_prop:s0" dev="tmpfs" ino=10408 scontext=u:r:untrusted_app_25:s0:c512,c768 tcontext=u:object_r:mtk_em_tel_log_prop:s0 tclass=file permissive=1
[19259.681617] (6)[410:wifi@1.0-servic][MTK-WIFI] WIFI_open[I]: major 153 minor 0 (pid 410)
[19259.681644] (6)[410:wifi@1.0-servic][MTK-WIFI] WIFI_write[I]: WIFI_write 0, length 2
[19259.710907] (4)[19855:tx_thread][wlan]wlanoidSetP2pMode:(P2P INFO) Set P2P enable[0] mode[0]
[19259.710931] (4)[19855:tx_thread][wlan]p2pRemove:(P2P INFO) Prepare to remove p2p...
[19259.710956] (4)[19855:tx_thread][wlan]p2pDevFsmStateTransition:(P2P STATE) [P2P_DEV]TRANSITION: [P2P_DEV_STATE_IDLE] -> [P2P_DEV_STATE_IDLE]
[19259.710988] (4)[19855:tx_thread][wlan]p2pRoleFsmStateTransition:(P2P STATE) [P2P_ROLE][0]TRANSITION: [P2P_ROLE_STATE_IDLE] -> [P2P_ROLE_STATE_IDLE]
[19259.711100] (6)[410:wifi@1.0-servic][MTK-WIFI] WIFI_write[I]: Turn off p2p/ap mode
[19259.711113] (6)[410:wifi@1.0-servic][HIF-SDIO][I]mtk_wcn_wmt_func_ctrl:wmt-exp: OPID(4) type(3) start
[19259.711196] (1)[455:mtk_wmtd_worker][HIF-SDIO][W]wmtd_worker_thread:opid: 0x21
[19259.711208] (1)[455:mtk_wmtd_worker][WMT-FUNC][W]wmt_func_wifi_off:WMT-FUNC: wmt wlan func on before wlan remove
[19259.711218] (1)[455:mtk_wmtd_worker][wlan]wlanRemove:(INIT INFO) Remove wlan!
[19259.711224] (1)[455:mtk_wmtd_worker][MTK-WIFI] register_set_p2p_mode_handler[I]: (pid 455) register set p2p mode handler (null)
[19259.714325] (4)[19855:tx_thread][wlan]tx_thread:(INIT INFO) tx_thread should stop now...
[19259.714339] (4)[19855:tx_thread][wlan]wlanReleasePendingOid:(INIT INFO) tx_thread stopped! Releasing pending OIDs ..
[19259.714901] (7)[455:mtk_wmtd_worker][wlan]wlanRemove:(INIT INFO) wlan thread stopped
[19259.726924] (3)[453:mtk_stp_btm][WMT-DFT][E]wmt_idc_msg_to_lte_handing(216):there is no coex data in stp buffer
[19259.736164] (1)[398:composer@2.1-se][DISP][layering_rule_senario_decision #353]ERROR:test_by mtk_0
[19259.736185] (1)[398:composer@2.1-se][DISP][layering_rule_senario_decision #374]ERROR:test_by mtk_1
[19259.736191] (1)[398:composer@2.1-se][DISP][layering_rule_senario_decision #386]ERROR:test_by mtk_3
[19259.736197] (1)[398:composer@2.1-se][DISP][layering_rule_senario_decision #394]ERROR:test_by mtk_4,width=1080,height=2340
[19259.736203] (1)[398:composer@2.1-se][DISP][layering_rule_senario_decision #399]ERROR:test_by mtk_5
[19259.743488] (0)[455:mtk_wmtd_worker][WMT-FUNC][W]wmt_func_wifi_off:WMT-FUNC: wmt call wlan remove ok
[19259.743602] (0)[455:mtk_wmtd_worker][WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC OFF]status(b:2 f:0 g:0 w:0 lpbk:2 coredump:0 wmt:2 ant:0 sd1:0 sd2:0 stp:0)
[19259.743704] (1)[410:wifi@1.0-servic][HIF-SDIO][I]mtk_wcn_wmt_func_ctrl:OPID(33) type(3) ok
[19259.743712] (1)[410:wifi@1.0-servic][MTK-WIFI] WIFI_write[I]: WMT turn off WIFI OK!
[19259.743730] (1)[410:wifi@1.0-servic][MTK-WIFI] WIFI_close[I]: major 153 minor 0 (pid 410)
[19259.744718] (3)[1:init]init: PropSet [wlan.driver.status]=[unloaded] Done
[19259.749331] (3)[410:wifi@1.0-servic][MTK-WIFI] WIFI_open[I]: major 153 minor 0 (pid 410)
[19259.749365] (3)[410:wifi@1.0-servic][MTK-WIFI] WIFI_write[I]: WIFI_write 1, length 2
[19259.749378] (3)[410:wifi@1.0-servic][HIF-SDIO][I]mtk_wcn_wmt_func_ctrl:wmt-exp: OPID(3) type(3) start
[19259.749477] (3)[455:mtk_wmtd_worker][HIF-SDIO][W]wmtd_worker_thread:opid: 0x20
[19259.749487] (3)[455:mtk_wmtd_worker][WMT-CORE][E]opfunc_wlan_probe(3307):not implemented yet hifType: 0x2, unspecified wifi_hif
[19259.749498] (3)[455:mtk_wmtd_worker][WMT-FUNC][W]wmt_func_wifi_on:WMT-FUNC: wmt wlan func on before wlan probe
[19259.749523] (3)[455:mtk_wmtd_worker][wlan]wlanNetCreate:(INIT INFO) net_device prDev(0xffffffc048065000) allocated
[19259.750560] (3)[455:mtk_wmtd_worker][wlan]glLoadNvram:(INIT INFO) fgNvramAvailable = 1
[19259.755718] (3)[455:mtk_wmtd_worker][wlan]nicInitializeAdapter:(NIC INFO) Chip ID[6771] Version[E1]
[19259.756378] (3)[455:mtk_wmtd_worker][wlan]nicTxInitialize:(TX INFO) Init PID pool mach:64 size:512
[19259.759354] (3)[455:mtk_wmtd_worker][wlan]kalFirmwareOpen:(INIT INFO) Open FW image /vendor/firmware/WIFI_RAM_CODE_6759 success
[19259.765736] (3)[455:mtk_wmtd_worker][wlan]wlanAdapterStart:(INIT INFO) FW download end
[19259.794622] (1)[68:conn-md-thread][CONN-MD-DFT][I]conn_md_log_print_msg:send message to Modem, 19259.366 19259.718 19259.718 19259.786 19259.794
[19259.794921] (0)[455:mtk_wmtd_worker][wlan]wlanAdapterStart:(INIT INFO) Ready bit asserted
[19259.797311] (0)[455:mtk_wmtd_worker][wlan]wlanQueryNicCapability:(NIC INFO) FW Ver DEC[4.4] HEX[4.4], Driver Ver[0.0]
[19259.797337] (0)[455:mtk_wmtd_worker][wlan]wlanUpdateNetworkAddress:(INIT INFO) Using host-supplied MAC address
[19259.797555] (0)[455:mtk_wmtd_worker][wlan]kalIndicateStatusAndComplete:(INIT INFO) [wifi] wlan%d netif_carrier_off
[19259.797807] (0)[455:mtk_wmtd_worker][wlan]nicFreq2ChannelNum:(NIC WARN) Return Invalid Channelnum = 0
[19259.797842] (0)[455:mtk_wmtd_worker][wlan]rlmDomainGetDomainInfo:(RLM INFO) No matched country code, use the default regulatory domain
[19259.797856] (0)[455:mtk_wmtd_worker][wlan]rlmDomainSendPwrLimitCmd:(RLM INFO) Domain: ValidCC =0x0000, ucNum=0
[19259.798235] (1)[19922:tx_thread][wlan]tx_thread:(INIT INFO) tx_thread:19922 starts running...
[19259.798308] (3)[19923:hif_thread][wlan]hif_thread:(INIT INFO) hif_thread:19923 starts running...
[19259.798999] (7)[19922:tx_thread]RF Stat WF_Sx LPAON_LPCR Fail! = 0x5cfc001, 0
[19259.800509] (7)[19924:rx_thread][wlan]wlanProbe:(INIT INFO) MAC address: a0:8c:5d:dd:19:6f
[19259.800587] (7)[19924:rx_thread][wlan]rx_thread:(INIT INFO) rx_thread:19924 starts running...
[19259.803147] (5)[455:mtk_wmtd_worker][MTK-WIFI] register_set_p2p_mode_handler[I]: (pid 455) register set p2p mode handler ffffff8000f1249c
[19259.803256] (5)[455:mtk_wmtd_worker][WMT-FUNC][W]wmt_func_wifi_on:WMT-FUNC: wmt call wlan probe ok
[19259.803272] (5)[455:mtk_wmtd_worker][WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:2 f:0 g:0 w:2 lpbk:2 coredump:0 wmt:2 ant:0 sd1:0 sd2:0 stp:0)
[19259.803311] (2)[410:wifi@1.0-servic][HIF-SDIO][I]mtk_wcn_wmt_func_ctrl:OPID(32) type(3) ok
[19259.803322] (2)[410:wifi@1.0-servic][MTK-WIFI] WIFI_write[I]: WMT turn on WIFI success!
[19259.803344] (2)[410:wifi@1.0-servic][MTK-WIFI] WIFI_close[I]: major 153 minor 0 (pid 410)
[19259.803657] (1)[1:init]init: PropSet [wlan.driver.status]=[ok] Done
[19259.806042] (0)[1:init]init: Received control message `start` for `wpa_supplicant` from pid: 1305 (/system/bin/wificond)
[19259.806948] (0)[1:init]init: starting service `wpa_supplicant`...
[19259.808220] (5)[19922:tx_thread]eLNA[5G]HG = 0
[19259.808241] (5)[19922:tx_thread]PwrLimit: num=0
[19259.808241]
[19259.808249] (5)[19922:tx_thread]SAR 0 63 63 63 63 63
[19259.808256] (5)[19922:tx_thread]
[19259.808256]
[19259.809351] (4)[19925:init]init: Created socket `/dev/socket/wpa_wlan0`, mode 660, user 1010, group 1010
[19259.913793] (0)[410:wifi@1.0-servic][MTK-WIFI] WIFI_open[I]: major 153 minor 0 (pid 410)
[19259.913862] (0)[410:wifi@1.0-servic][MTK-WIFI] WIFI_write[I]: WIFI_write STA, length 4
[19259.913958] (3)[19922:tx_thread][wlan]wlanoidSetP2pMode:(P2P INFO) Set P2P enable[1] mode[0]
[19259.914259] (3)[19922:tx_thread][wlan]p2pDevFsmStateTransition:(P2P STATE) [P2P_DEV]TRANSITION: [P2P_DEV_STATE_IDLE] -> [P2P_DEV_STATE_IDLE]
[19259.914332] (3)[19922:tx_thread][wlan]p2pRoleFsmStateTransition:(P2P STATE) [P2P_ROLE][0]TRANSITION: [P2P_ROLE_STATE_IDLE] -> [P2P_ROLE_STATE_IDLE]
[19259.914362] (3)[19922:tx_thread][wlan]p2pLaunch:(P2P INFO) Register p2p succeed
[19259.916391] (3)[410:wifi@1.0-servic][MTK-WIFI] WIFI_write[I]: Set wlan mode 0 --> 2
[19259.916453] (3)[410:wifi@1.0-servic][MTK-WIFI] WIFI_close[I]: major 153 minor 0 (pid 410)
[19259.924683] (3)[19923:hif_thread][wlan]nicpmSetDriverOwn:(NIC INFO) DRIVER OWN, status=1 count=6
[19259.924978] (1)[19922:tx_thread][wlan]wlanoidSet802dot11PowerSaveProfile:(OID INFO) Set AIS Network BSS(0) PS mode to CAM (0)
[19259.925153] (2)[410:wifi@1.0-servic]IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[19259.927186] (0)[19922:tx_thread]bssActivateCtrl 4 1 1 | 4 a2:8c:5d:dd:19:6f 0 | connection state: prev/cur 1/1
[19259.927382] (1)[19922:tx_thread]bssActivateCtrl 4 0 1 | 4 00:00:00:00:00:00 0 | connection state: prev/cur 1/1
[19259.927515] (3)[19922:tx_thread]bssActivateCtrl 1 1 1 | 2 a2:8c:5d:dd:19:6f 0 | connection state: prev/cur 1/1
[19259.927771] (3)[19922:tx_thread]CMD:[80:4:891161427][2:5:891161431][24:6:891161609][40:7:891161719][42:8:891161720][f:9:891161721][f:10:891161722][49:11:891161722][36:12:891161724][48:13:891161725]
[19259.927887] (1)[19922:tx_thread]CMD:[2:14:891161730][59:15:891161730][90:16:891161732][11:17:891165679][11:18:891165687][14:19:891165690][11:20:891165691][a:21:891165697][5:22:891165697][c1:23:891165698]
[19259.956346] (3)[0:swapper/3]Power/swap DP: No enter --- SODI3: No enter --- SODI: No enter ---
[19259.956399] (3)[0:swapper/3]mcdi cpu: 173, 183, 175, 164, 490, 429, 301, 269, cluster : 59, 339, pause = 60, multi core = 87, residency = 0, last core = 60, avail cpu = 00ff, cluster = 0003, enabled = 1, max_s_state = 5 (buck_off = 0), system_idle_hint = 00000000
[19259.956399]
[19259.970994] (1)[19923:hif_thread][wlan]nicpmSetDriverOwn:(NIC INFO) DRIVER OWN, status=1 count=6
[19259.984234] (3)[19922:tx_thread][wlan]wlanoidSet802dot11PowerSaveProfile:(OID INFO) Set P2P Network BSS(1) PS mode to CAM (0)
[19259.985459] (3)[19925:wpa_supplicant]IPv6: ADDRCONF(NETDEV_UP): p2p0: link is not ready
[19260.001159] (4)[410:wifi@1.0-servic][wlan]mtk_cfg80211_vendor_set_scan_mac_oui:(REQ INFO) Set MAC oui: 00-0c-e7
[19260.006373] (0)[19922:tx_thread][wlan]rlmDomainSendPwrLimitCmd:(RLM INFO) Domain: ValidCC =US, ChNum=64
[19260.014157] (5)[19925:wpa_supplicant][wlan]priv_support_driver_cmd:(REQ INFO) priv_support_driver_cmd: driver cmd "SETSUSPENDMODE 0" on wlan0
[19260.014184] (5)[19925:wpa_supplicant][wlan]priv_driver_set_suspend_mode:(REQ INFO) priv_driver_set_suspend_mode: Set suspend mode [0]
[19260.014191] (5)[19925:wpa_supplicant][wlan]priv_driver_set_suspend_mode:(REQ INFO) priv_driver_set_suspend_mode: Already in suspend mode, SKIP!
[19260.014469] (2)[19922:tx_thread][wlan]wlanoidSet802dot11PowerSaveProfile:(OID INFO) Set AIS Network BSS(0) PS mode to FAST PS (2)
[19260.016679] (1)[19923:hif_thread][wlan]nicpmSetDriverOwn:(NIC INFO) DRIVER OWN, status=1 count=10
[19260.019553] (1)[19922:tx_thread]PwrLimit: num=64
[19260.019553]
[19260.021698] (0)[19922:tx_thread][wlan]mtk_cfg80211_vendor_get_roaming_capabilities:(REQ INFO) Get roaming capabilities: max black/whitelist=16/16
[19260.022081] (0)[19922:tx_thread][wlan]wlanoidConfigRoaming:(REQ INFO) Get the number of blacklist=0
[19260.022946] (6)[1481:WifiStateMachin]alarm_dev: alarm 2 set 27211.304000000
[19260.022971] (6)[1481:WifiStateMachin]alarm_dev: alarm 3 set 27207.112000000
[19260.023380] (6)[1481:WifiStateMachin]alarm_dev: alarm 2 set 27211.304000000
[19260.023397] (6)[1481:WifiStateMachin]alarm_dev: alarm 3 set 27207.112000000
[19260.028320] (5)[1305:wificond][wlan]mtk_cfg80211_scan:(REQ INFO) request->n_ssids=1
[19260.028331] (5)[1305:wificond][wlan]mtk_cfg80211_scan:(REQ INFO) i=0, num_ssid-- for wildcard scan
[19260.028345] (5)[1305:wificond][wlan]mtk_cfg80211_scan:(REQ INFO) mtk_cfg80211_scan(), n_ssids=1, num_ssid=0
[19260.028363] (5)[1305:wificond][wlan]kalParseRandomMac:(SCN INFO) random mac=7a:ab:4c:25:cc:ad mac_addr=02:00:00:00:00:00, mac_addr_mask=03:00:00:00:00:00
[19260.028413] (6)[19922:tx_thread][wlan]aisFsmSteps:(AIS STATE) [13] TRANSITION: [0] -> [2]
[19260.028434] (6)[19922:tx_thread][wlan]aisCheckNeighborApValidity:(AIS INFO) timeout, Cur 18960164, Rcv at 0, Valid Interval 0
[19260.028442] (6)[19922:tx_thread][wlan]aisFsmSteps:(AIS INFO) Full2Partial ucWFDEnable=0
[19260.028451] (6)[19922:tx_thread][wlan]aisPreScan:(AIS INFO) scan start at 18960164
[19260.028476] (6)[19922:tx_thread][wlan]scnFsmSteps:(SCN STATE) [19] TRANSITION: [0] -> [1]
[19260.028892] (5)[1482:WifiScanningSer]alarm_dev: alarm 2 set 27211.304000000
[19260.028912] (5)[1482:WifiScanningSer]alarm_dev: alarm 3 set 27207.112000000
[19260.028925] (6)[19922:tx_thread][wlan]scnSendScanReqV3:(SCN INFO) ScnReqV4: ScnType=1, SSIDType=1, Num=0, ChType=0, Num=0, Dwell=0, RMac=7a:ab:4c:25:cc:ad, FuncM=1, Ver=4
[19260.029527] (1)[19923:hif_thread][wlan]nicTxCmd:(TX INFO) TX CMD: ID[0x03] SEQ[38] SET[1] LEN[510]
[19260.032091] (6)[19922:tx_thread]bssActivateCtrl 0 1 0 | 1 a0:8c:5d:dd:19:6f 1 | connection state: prev/cur 1/1
[19260.032104] (6)[19922:tx_thread]SCN: ScanReqGeneric 1|0|1|0|0|0|0|1|0|0|0|1|[ff:ff:ff:ff:ff:ff]|4
[19260.032113] (6)[19922:tx_thread]SCN: SCAN_STATE_SCAN_START
[19260.032240] (6)[19922:tx_thread]pmSetAllBcn2Mcu: Bss 0, HwParse 0, MPTCR0=10, MPTCR2=0, IEchk 0
[19260.299017] (0)[19153:kworker/0:0][Power/PPM] (0x60)(11793)(0)(0-7)(15)(10)(4)(4) (15)(14)(4)(4)
wlan_drv_gen3 4853760 0 - Live 0x0000000000000000 (O)
wmt_chrdev_wifi 20480 1 wlan_drv_gen3, Live 0x0000000000000000 (O)
gps_drv 61440 0 - Live 0x0000000000000000 (O)
fmradio_drv 172032 0 - Live 0x0000000000000000 (O)
bt_drv 24576 1 - Live 0x0000000000000000 (O)
wmt_drv 1163264 6 wlan_drv_gen3,wmt_chrdev_wifi,gps_drv,fmradio_drv,bt_drv, Live 0x0000000000000000 (O)
fpsgo 16384 0 - Live 0x0000000000000000 (O)
RAM: 0 MB
Flash: 1.000 GB; 128 GB (116.480 GB actual); 183.346 GB
zram0: 1.000 GB
mmcblk0: 116.480 GB
mmcblk1: 183.346 GB
Touch Screen for A-gold S3_Pro
$19.5 RBL ICY DBS Blyth Doll Scalp Wigs Including The Hard Endoconch Dome OB24 ANIME GIRL
$7.14 Personalized Private Party Cake Topper Custom Your Name Private Party Cake Decoration Topper
$9.75 Bandage/Sexy Bikini Swimsuit Push-up Swimsuit Brazil Sexy Bikini Ladies Two-piece Swimsuit Bikini Set
$118.34 Xcartoys 1:64 Ben-chi G63 Camera Rocker X2-01 Alloy Simulation Model Car
$2.73 10/30/50/100PCS Cool Fashion Brand Logo Stickers Aesthetic Skateboard Laptop Motorcycle Phone Car Graffiti Sticker Decal Kid Toy
$2.6 6pcs 10-28 mm golden gold metal buttons garment coat sewing accessories buttons for clothing crafts Black point oil button
$7.6 Natural Linen Gift Bags 5x7cm 7x9cm 9x12cm 50pcs/Lot Party Candy Jute Dust Sack Custom Logo Jewelry Pouch
$3.27 Electric Shock Penis Stimulator Ring Anal Sex Toys For Men Electric Shock Medical Themed Ring Toys Accessories Urethral Plug
$18.94 For Samsung Galaxy S23 Ultra Case 6.8“Slim Stylish Geometric Marble shockproof bumper Phone Case with Built-in Screen Protector
Replacement Battery for A-gold S3_Pro
$10.6 Custom Circular Stickers Personalized Logo Sticker Adhesive Labels Wedding Party Decoration Stationery Sticker Thank you Sticker
$20.32 50pcs 30ml 50ml Travel Plastic Clear Keychain Bottles Leakproof Squeeze Container with Flip Cap for Cosmetics Refillable Bottle
$51.33 KORIN Multifunction Crossbody Bag Cut-resistant Waterproof Running Sports Waist Bags Messenger Chest Bag Dropshipping Wholesale
$10.13 Dog Cat Flap Door with 4 Way Security Lock Flap Door for Dog Cats Kitten ABS Plastic Small Pet Gate Door Kit Cat Dogs Flap Doors
$27.91 Vention 8K HDMI 2.1 Cable 120Hz 48Gbps Fiber Optic HDMI Cable Ultra High Speed HDR eARC for HD Samsung LG TV Box PS5 Cable HDMI
$15.13 Mini USB Book Lights Portable USB LED Lamps DC 5V Ultra Bright Reading Lamp For Power Bank Camping PC Laptops USB Night Lights
$4.97 50/200/500 Eyelash Patches For Building Grafted Eyelash Pads Russian Packing Under Eyes Paper Stickers For Eyelash Extension
$10.15 Car Mirror Interior Rearview Mirrors Universal Auto Rear View Mirror Anti-glare Wide-angle Surface Blue Mirror Auto Accessories
$46.09 Mens Overcoat Trench Coats Winter Male Pea Coats Double Breasted Wool & Blends Coat Brand Clothing W01
Cover Cases for A-gold S3_Pro
$9.75 Bandage/Sexy Bikini Swimsuit Push-up Swimsuit Brazil Sexy Bikini Ladies Two-piece Swimsuit Bikini Set
$19.5 RBL ICY DBS Blyth Doll Scalp Wigs Including The Hard Endoconch Dome OB24 ANIME GIRL
$7.14 Personalized Private Party Cake Topper Custom Your Name Private Party Cake Decoration Topper
$118.34 Xcartoys 1:64 Ben-chi G63 Camera Rocker X2-01 Alloy Simulation Model Car
$2.73 10/30/50/100PCS Cool Fashion Brand Logo Stickers Aesthetic Skateboard Laptop Motorcycle Phone Car Graffiti Sticker Decal Kid Toy
$7.6 Natural Linen Gift Bags 5x7cm 7x9cm 9x12cm 50pcs/Lot Party Candy Jute Dust Sack Custom Logo Jewelry Pouch
$2.6 6pcs 10-28 mm golden gold metal buttons garment coat sewing accessories buttons for clothing crafts Black point oil button
$3.27 Electric Shock Penis Stimulator Ring Anal Sex Toys For Men Electric Shock Medical Themed Ring Toys Accessories Urethral Plug
$18.94 For Samsung Galaxy S23 Ultra Case 6.8“Slim Stylish Geometric Marble shockproof bumper Phone Case with Built-in Screen Protector
| Find Similar devices | |
|---|---|
| Same CPU: | |
| Same Display resolution: | |
| Same ro.build.description: | |
