torque S18 规格

一般信息
操作系统的详细信息
CPU信息
图形处理器细节
WiFi内核信息
build.prop
的内核模块
存储器映射

一般规格
生产厂家	torque
型号	S18
Android版	4.0.4; 20130725; SDK15
中央处理单元	1 core; ARMv7 Processor rev 2 (v7l) exDroid; Max: 1200.0 MHz; Min: 60.0 MHz
显示	800 x 480; DPI: 160; Evaluated Size: 5.8"
触摸屏	Multitouch 5 points
图形处理器	Mali-400 MP; ARM; OpenGL ES-CM 1.1; OpenGL ES 2.0
内存RAM	448 MB
快闪记忆体	4 GB Build-in (3.672 GB actual)
沟通
电话	None
WiFi	8188eu; IEEE 802.11 b/g/n; Realtek RTL8188E; AP Mode
USB主机	Yes
蓝牙	No
全球定位系统	Yes
高级功能
前置摄像头	Fail to connect to camera service
背照相机	No
传感器	mxc622x 2-axis Accelerometer (MEMSIC); range: 0...2; resolution: 0.153 (7.661%); power: 0.005mA;
震动模式	No
支持的语言	40; Arabic; Bulgarian; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Vietnamese; Chinese
电池	Technology: LiFe; Voltage: 3997
External USB Ethernet	Realtek 8150 based adapters; MCS7830 based adapters
SD Version:	1.1 5

KERNEL: Linux version 3.0.8+ (inet_hgb@supperFAE) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #43 PREEMPT Thu Jul 25 12:26:18 CST 2013
CODENAME: REL
Mainboard: nuclear
BRAND: tp
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: nuclear-evb
DISPLAY: P3.S18.A13_86VZ_M758C2.20130726
FINGERPRINT: iNet/nuclear_evb/nuclear-evb:4.0.4/IMM76D/20130725:eng/test-keys
HARDWARE: sun5i
ID: IMM76D
TAGS: test-keys

Processor : ARMv7 Processor rev 2 (v7l)
BogoMIPS : 1001.88
Features : swp half thumb fastmult vfp edsp neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc08
CPU revision : 2
Hardware : sun5i
Revision : a13b
Serial : 09c060ea3633303050564b3716254284

GL_OES_texture_npot
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_standard_derivatives
GL_OES_EGL_image
GL_OES_depth24
GL_ARM_rgba8
GL_ARM_mali_shader_binary
GL_OES_depth_texture
GL_OES_packed_depth_stencil
GL_EXT_texture_format_BGRA8888
GL_EXT_blend_minmax
GL_OES_EGL_image_external
GL_OES_EGL_sync
GL_OES_rgb8_rgba8
GL_EXT_multisampled_render_to_texture
GL_EXT_discard_framebuffer
GL_OES_get_program_binary
GL_ARM_mali_program_binary
GL_EXT_shader_texture_lod
GL_EXT_robustness

<6>[ 374.940195] usb 2-1: reset high speed USB device number 2 using sw-ehci
<4>[ 375.091864] -r871xu_dev_remove, done
<4>[ 375.092015] -rtw_drv_halt
<4>[ 375.092024] sw_usb_disable_hcd: usbc_num = 1
<4>[ 375.092033] WRN:L819(drivers/usb/host/ehci_sun5i.c):ERR: not support sw_usb_disable_ehci
<4>[ 375.944779] sw_usb_enable_hcd: usbc_num = 1
<4>[ 375.944803] ERR: script_parser_fetch usb_controller_type failed
<4>[ 375.944818] WRN:L872(drivers/usb/host/ehci_sun5i.c):ERR: not support sw_usb_enable_ehci
<4>[ 375.944829] rtl8188eu driver version=v4.1.2.1_5574.20121024
<4>[ 375.944837] build time: Jul 25 2013 12:26:02
<4>[ 375.944845] ##########rtw_suspend_lock_init ###########
<4>[ 375.945051] register rtw_netdev_ops to netdev_ops
<4>[ 375.945071] rtw_wdev_alloc(padapter=e08f4000)
<4>[ 375.947152] CHIP TYPE: RTL8188E
<4>[ 375.947208]
<4>[ 375.947211] usb_endpoint_descriptor(0):
<4>[ 375.947279] bLength=7
<4>[ 375.947286] bDescriptorType=5
<4>[ 375.947292] bEndpointAddress=81
<4>[ 375.947298] wMaxPacketSize=512
<4>[ 375.947303] bInterval=0
<4>[ 375.947308] RT_usb_endpoint_is_bulk_in = 1
<4>[ 375.947315]
<4>[ 375.947318] usb_endpoint_descriptor(1):
<4>[ 375.947324] bLength=7
<4>[ 375.947329] bDescriptorType=5
<4>[ 375.947334] bEndpointAddress=2
<4>[ 375.947339] wMaxPacketSize=512
<4>[ 375.947345] bInterval=0
<4>[ 375.947351] RT_usb_endpoint_is_bulk_out = 2
<4>[ 375.947357]
<4>[ 375.947360] usb_endpoint_descriptor(2):
<4>[ 375.947366] bLength=7
<4>[ 375.947371] bDescriptorType=5
<4>[ 375.947376] bEndpointAddress=3
<4>[ 375.947382] wMaxPacketSize=512
<4>[ 375.947387] bInterval=0
<4>[ 375.947392] RT_usb_endpoint_is_bulk_out = 3
<4>[ 375.947400] nr_endpoint=3, in_num=1, out_num=2
<4>[ 375.947404]
<4>[ 375.947409] USB_SPEED_HIGH
<4>[ 375.947857] Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_A_CUT_1T1R_RomVer(0)
<4>[ 375.947880] RF_Type is 3!!
<4>[ 375.947890] _ConfigNormalChipOutEP_8188E OutEpQueueSel(0x05), OutEpNumber(2)
<4>[ 375.947974] EEPROM type is E-FUSE
<4>[ 375.947982] ====> _ReadAdapterInfo8188EU
<4>[ 375.948116] Boot from EFUSE, Autoload OK !
<4>[ 376.102366] EEPROM ID=0x8129
<4>[ 376.102384] VID = 0x0BDA, PID = 0x0179
<4>[ 376.102393] Customer ID: 0x00, SubCustomer ID: 0xCD
<4>[ 376.102408] Hal_ReadPowerSavingMode88E...bHWPwrPindetect(0)-bHWPowerdown(0) ,bSupportRemoteWakeup(0)
<4>[ 376.102419] ### PS params=> power_mgnt(1),usbss_enable(0) ###
<4>[ 376.102432] ======= Path 0, Channel 0 =======
<4>[ 376.102440] Index24G_CCK_Base[0][0] = 0x2b
<4>[ 376.102448] Index24G_BW40_Base[0][0] = 0x2f
<4>[ 376.102455] ======= Path 0, Channel 1 =======
<4>[ 376.102462] Index24G_CCK_Base[0][1] = 0x2b
<4>[ 376.102469] Index24G_BW40_Base[0][1] = 0x2f
<4>[ 376.102475] ======= Path 0, Channel 2 =======
<4>[ 376.102483] Index24G_CCK_Base[0][2] = 0x2b
<4>[ 376.102490] Index24G_BW40_Base[0][2] = 0x2f
<4>[ 376.102496] ======= Path 0, Channel 3 =======
<4>[ 376.102503] Index24G_CCK_Base[0][3] = 0x2b
<4>[ 376.102510] Index24G_BW40_Base[0][3] = 0x2f
<4>[ 376.102517] ======= Path 0, Channel 4 =======
<4>[ 376.102524] Index24G_CCK_Base[0][4] = 0x2b
<4>[ 376.102531] Index24G_BW40_Base[0][4] = 0x2f
<4>[ 376.102538] ======= Path 0, Channel 5 =======
<4>[ 376.102545] Index24G_CCK_Base[0][5] = 0x2b
<4>[ 376.102552] Index24G_BW40_Base[0][5] = 0x2f
<4>[ 376.102559] ======= Path 0, Channel 6 =======
<4>[ 376.102566] Index24G_CCK_Base[0][6] = 0x2a
<4>[ 376.102573] Index24G_BW40_Base[0][6] = 0x2e
<4>[ 376.102579] ======= Path 0, Channel 7 =======
<4>[ 376.102586] Index24G_CCK_Base[0][7] = 0x2a
<4>[ 376.102593] Index24G_BW40_Base[0][7] = 0x2e
<4>[ 376.102600] ======= Path 0, Channel 8 =======
<4>[ 376.102607] Index24G_CCK_Base[0][8] = 0x2a
<4>[ 376.102614] Index24G_BW40_Base[0][8] = 0x2e
<4>[ 376.102621] ======= Path 0, Channel 9 =======
<4>[ 376.102628] Index24G_CCK_Base[0][9] = 0x29
<4>[ 376.102635] Index24G_BW40_Base[0][9] = 0x2d
<4>[ 376.102642] ======= Path 0, Channel 10 =======
<4>[ 376.102649] Index24G_CCK_Base[0][10] = 0x29
<4>[ 376.102656] Index24G_BW40_Base[0][10] = 0x2d
<4>[ 376.102662] ======= Path 0, Channel 11 =======
<4>[ 376.102670] Index24G_CCK_Base[0][11] = 0x29
<4>[ 376.102677] Index24G_BW40_Base[0][11] = 0x2d
<4>[ 376.102683] ======= Path 0, Channel 12 =======
<4>[ 376.102691] Index24G_CCK_Base[0][12] = 0x29
<4>[ 376.102697] Index24G_BW40_Base[0][12] = 0x2d
<4>[ 376.102704] ======= Path 0, Channel 13 =======
<4>[ 376.102711] Index24G_CCK_Base[0][13] = 0x29
<4>[ 376.102718] Index24G_BW40_Base[0][13] = 0x2d
<4>[ 376.102725] ======= Path 0, Channel 14 =======
<4>[ 376.102732] Index24G_CCK_Base[0][14] = 0x23
<4>[ 376.102739] Index24G_BW40_Base[0][14] = 0x2d
<4>[ 376.102749] ======= TxCount 0 =======
<4>[ 376.102756] CCK_24G_Diff[0][0]= 0
<4>[ 376.102762] OFDM_24G_Diff[0][0]= 2
<4>[ 376.102777] BW20_24G_Diff[0][0]= 0
<4>[ 376.102784] BW40_24G_Diff[0][0]= 0
<4>[ 376.102790] ======= TxCount 1 =======
<4>[ 376.102797] CCK_24G_Diff[0][1]= -2
<4>[ 376.102803] OFDM_24G_Diff[0][1]= -2
<4>[ 376.102809] BW20_24G_Diff[0][1]= -2
<4>[ 376.102816] BW40_24G_Diff[0][1]= -2
<4>[ 376.102822] ======= TxCount 2 =======
<4>[ 376.102828] CCK_24G_Diff[0][2]= -2
<4>[ 376.102839] OFDM_24G_Diff[0][2]= -2
<4>[ 376.102846] BW20_24G_Diff[0][2]= -2
<4>[ 376.102852] BW40_24G_Diff[0][2]= -2
<4>[ 376.102858] ======= TxCount 3 =======
<4>[ 376.102865] CCK_24G_Diff[0][3]= -2
<4>[ 376.102871] OFDM_24G_Diff[0][3]= -2
<4>[ 376.102878] BW20_24G_Diff[0][3]= -2
<4>[ 376.102884] BW40_24G_Diff[0][3]= -2
<4>[ 376.102890] EEPROMRegulatory = 0x0
<4>[ 376.102897] mlmepriv.ChannelPlan = 0x20
<4>[ 376.102903] EEPROM Customer ID: 0x 0
<4>[ 376.102911] EEPROM : AntDivCfg = 0, TRxAntDivType = 3
<4>[ 376.102918] Board Type: 0x 0
<4>[ 376.102924] ThermalMeter = 0x1c
<4>[ 376.102933] <==== _ReadAdapterInfo8188EU in 160 ms
<4>[ 376.109500] rtw_register_early_suspend
<4>[ 376.109668] rtw_macaddr_cfg MAC Address = 00:aa:0e:04:94:48
<4>[ 376.109682] MAC Address from pnetdev->dev_addr= 00:aa:0e:04:94:48
<4>[ 376.145120] bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0
<6>[ 376.149622] usbcore: registered new interface driver rtl8188eu
<4>[ 376.178851] rtw_android_priv_cmd: Android private cmd "BLOCK 1" on wlan0
<5>[ 376.180804] init: starting `wpa_supplicant`
<6>[ 376.184422] init: Created socket `/dev/socket/wpa_wlan0` with mode `660`, user `1010`, group `1010`
<4>[ 376.196513] cfg80211_rtw_change_iface call netdev_open
<4>[ 376.196543] +871x_drv - drv_open, bup=0
<4>[ 376.255123] rtl8188e_FirmwareDownload: fw_ver=4 fw_subver=0 sig=0x88e1
<4>[ 376.275972] _FWFreeToGo: Checksum report OK! REG_MCUFWDL:0x00030004
<4>[ 376.283403] _FWFreeToGo: Polling FW ready success!! REG_MCUFWDL:0x000300c6
<4>[ 376.283442] Set RF Chip ID to RF_6052 and RF type to 1T1R.
<4>[ 376.607280] pDM_Odm TxPowerTrackControl = 1
<4>[ 376.841119] MAC Address from REG_MACID = 00:aa:0e:04:94:48
<4>[ 376.841140] rtl8188eu_hal_init in 650ms
<4>[ 376.841152] MAC Address = 00:aa:0e:04:94:48
<4>[ 376.845931] rtw_cfg80211_init_wiphy:rf_type=3
<4>[ 376.845947] -871x_drv - drv_open, bup=1
<4>[ 376.845959] cfg80211_rtw_change_iface, old_iftype=6, new_iftype=2
<4>[ 376.846117] +871x_drv - drv_open, bup=1
<4>[ 376.846127] -871x_drv - drv_open, bup=1
<4>[ 376.846221] cfg80211_rtw_set_power_mgmt
<6>[ 376.846413] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<4>[ 376.847389] cfg80211_rtw_flush_pmksa
<4>[ 376.865544] hw_var_set_opmode()-3435 mode = 2
<4>[ 376.868065] cfg80211_rtw_change_station
<4>[ 376.868344] cfg80211_rtw_change_station
<4>[ 376.868445] cfg80211_rtw_change_station
<4>[ 376.868747] rtw_android_priv_cmd: Android private cmd "P2P_DEV_ADDR" on wlan0
<4>[ 376.878638] rtw_android_priv_cmd: Android private cmd "BLOCK 0" on wlan0
<4>[ 376.917422] rtw_android_priv_cmd: Android private cmd "BTCOEXSCAN-STOP" on wlan0
<4>[ 376.918449] rtw_android_priv_cmd: Android private cmd "RXFILTER-ADD 3" on wlan0
<4>[ 376.921362] rtw_android_priv_cmd: Android private cmd "RXFILTER-START" on wlan0
<4>[ 376.921687] rtw_android_priv_cmd: Android private cmd "RXFILTER-STOP" on wlan0
<4>[ 376.921844] rtw_android_priv_cmd: Android private cmd "RXFILTER-REMOVE 2" on wlan0
<4>[ 376.921970] rtw_android_priv_cmd: Android private cmd "RXFILTER-START" on wlan0
<4>[ 376.922780] rtw_android_priv_cmd: Android private cmd "SETBAND 0" on wlan0
<4>[ 376.923088] rtw_android_priv_cmd: Android private cmd "SCAN-ACTIVE" on wlan0
<4>[ 376.924795] rtw_android_priv_cmd: Android private cmd "SCAN-PASSIVE" on wlan0

# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IMM76D
ro.build.version.incremental=20130725
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=Thu Jul 25 13:29:47 CST 2013
ro.build.date.utc=1374730187
ro.build.type=eng
ro.build.user=inet_hgb
ro.build.host=supperFAE
ro.build.tags=test-keys
ro.product.model=S18
ro.product.brand=tp
ro.product.name=nuclear_evb
ro.product.device=nuclear-evb
ro.product.board=nuclear
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=unknown
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=exDroid
# ro.build.product is obsolete; use ro.product.device
ro.build.product=nuclear-evb
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=nuclear_evb-eng 4.0.4 IMM76D 20130725 test-keys
ro.build.fingerprint=iNet/nuclear_evb/nuclear-evb:4.0.4/IMM76D/20130725:eng/test-keys
ro.build.characteristics=tablet
# end build properties
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=Ring_Synth_04.ogg
ro.config.notification_sound=pixiedust.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
dalvik.vm.heapsize=48m
ro.kernel.android.checkjni=0
wifi.interface=wlan0
wifi.supplicant_scan_interval=15
debug.egl.hw=1
ro.opengles.version=131072
persist.sys.strictmode.visual=0
persist.sys.strictmode.disable=1
hwui.render_dirty_regions=false
persist.sys.usb.config=mass_storage,adb
ro.property.tabletUI=true
ro.udisk.lable=MID
persist.sys.language=zh
persist.sys.country=CN
ro.product.lights=65
ro.build.display.id=P3.S18.A13_86VZ_M758C2.20130726
ro.config.3ginformation.path=/system/etc/3ginfo.gz
persist.sys.timezone=Asia/Shanghai
ro.sf.hwrotation=270
ro.product.firmware=1.5_130725
ro.setupwizard.mode=DISABLED
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt

8188eu 621112 0 - Live 0xbf3a0000
rtl8150 10305 0 - Live 0xbf303000
mcs7830 7581 0 - Live 0xbf2fd000
qf9700 9152 0 - Live 0xbf2f6000
asix 24601 0 - Live 0xbf2ea000
camera 61054 0 - Live 0xbf2d6000
videobuf_dma_contig 6251 0 - Live 0xbf2d1000
videobuf_core 20242 1 videobuf_dma_contig, Live 0xbf2c7000
cedarx 9351 0 - Live 0xbf2c0000
mali 115410 12 - Live 0xbf296000
ump 34349 17 mali, Live 0xbf287000
gslx680 1402326 0 - Live 0xbf106000
pixcir_cxx 23546 0 - Live 0xbf0fb000
gt811 16243 0 - Live 0xbf0f3000
byd693x_ts 9094 0 - Live 0xbf0db000
zet622x 17751 0 - Live 0xbf0cd000
ssd253x_ts 21656 0 - Live 0xbf0ac000
ft5x02 64469 0 - Live 0xbf08c000
inet_ctp 2227 7 gslx680,pixcir_cxx,gt811,byd693x_ts,zet622x,ssd253x_ts,ft5x02, Live 0xbf070000
mxc622x 6310 0 - Live 0xbf06a000
nand 225066 8 - Live 0xbf000000

RAM: 448 MB

System RAM: 144.000MB
System RAM: 304.000MB

Flash: 4 GB Build-in (3.672 GB actual)

nand: 3.672 GB

Find Similar devices
Same CPU:
Same Display resolution:
Same ro.build.description:

触摸屏为 torque S18

新电池 torque S18

占地面积 torque S18