- General
- Detalles OS
- CPU info
- GPU extensiones
- Mensajes del kernel WiFi
- build.prop
- Módulos
- Mapa de la memoria
| Especificaciones generales | |
|---|---|
| Marca | alps |
| Modelo | land_rover_hy1920x720 |
| Versión de Android | 10; eng.smartp.20210612.175748; SDK28 |
| CPU | 8 cores; AArch64 Processor rev 2 (aarch64); Max: 1989,0 MHz; Min: 793,0 MHz |
| Pantalla | 1920 x 720; DPI: 240; Evaluated Size: 8,5" |
| Pantalla táctil | Multitouch 5 points |
| GPU | Mali-G72 MP3; ARM; OpenGL ES-CM 1.1 v1.r14p0-01rel0.01e5c7ea2a98fd18e15a3ddbd079d568; OpenGL ES 3.2 v1.r14p0-01rel0.01e5c7ea2a98fd18e15a3ddbd079d568 |
| RAM | 0 MB |
| Flash | 1.000 GB; 128 GB (116.484 GB actual) (ver pestaña de mapa de memoria) |
| Comunicaciones | |
| Teléfono | GSM |
| WiFi | wlan_drv_gen3 |
| USB Host | Yes |
| Bluetooth | Yes |
| GPS | Yes |
| Funciones avanzadas | |
| Cámara frontal | Fail to connect to camera service |
| Cámara trasera | No |
| Sensores | ACCELEROMETER (MTK); range: 0...78,453; resolution: 0,001 (0,002%); power: 0,001mA; |
| MAGNETOMETER (MTK); range: 0...4912; resolution: 0,15 (0,003%); power: 0,001mA; | |
| LIGHT (MTK); range: 0...65535; resolution: 1 (0,002%); power: 0,001mA; | |
| PROXIMITY (MTK); range: 0...1; resolution: 1 (100%); power: 0,001mA; | |
| Alarma vibrante | Yes |
| Idiomas soportados | 204; Afrikaans; Aghem; Akan; Amharic; Arabic; Assamese; Asu; Asturian; Azerbaijani; Basaa; Belarusian; Bemba; Bena; Bulgarian; Bambara; Bangla; Tibetan; Breton; Bodo; Bosnian; Catalan; Chakma; Chechen; Chiga; Cherokee; Central Kurdish; Czech; Welsh; Danish; Taita; German; Zarma; Dogri; Lower Sorbian; Duala; Jola-Fonyi; Dzongkha; Embu; Ewe; Greek; English; Esperanto; Spanish; Estonian; Basque; Ewondo; Persian; Fulah; Finnish; Filipino; Faroese; French; Friulian; Western Frisian; Irish; Scottish Gaelic; Galician; Swiss German; Gujarati; Gusii; Manx; Hausa; Hawaiian; Hebrew; Hindi; Croatian; Upper Sorbian; Hungarian; Armenian; Indonesian; Igbo; Sichuan Yi; Icelandic; Italian; Japanese; Ngomba; Machame; Georgian; Kabyle; Kamba; Makonde; Kabuverdianu; Koyra Chiini; Kikuyu; Kazakh; Kako; Kalaallisut; Kalenjin; Khmer; Kannada; Korean; Konkani; Kashmiri; Shambala; Bafia; Colognian; Kashmiri Devanagari; Cornish; Kyrgyz; Langi; Luxembourgish; Ganda; Lakota; Lingala; Lao; Northern Luri; Lithuanian; Luba-Katanga; Luo; Luyia; Latvian; Maithili; Masai; Meru; Morisyen; Malagasy; Makhuwa-Meetto; Metaʼ; Macedonian; Malayalam; Mongolian; Manipuri; Marathi; Malay; Maltese; Mundang; Burmese; Mazanderani; Nama; Norwegian; North Ndebele; Low German; Nepali; Dutch; Kwasio; Norwegian; Ngiemboon; Nuer; Nyankole; Oromo; Odia; Ossetic; Punjabi; Polish; Pashto; Portuguese; Quechua; Romansh; Rundi; Romanian; Rombo; Russian; Kinyarwanda; Rwa; Sanskrit; Sakha; Samburu; Santali; Sangu; Sindhi; Sindhi Devanagari; Northern Sami; Sena; Koyraboro Senni; Sango; Tachelhit; Sinhala; Slovak; Slovenian; Inari Sami; Shona; Somali; Albanian; Serbian; Swedish; Swahili; Tamil; Telugu; Teso; Tajik; Thai; Tigrinya; Tongan; Turkish; Tatar; Tasawaq; Central Atlas Tamazight; Uyghur; Ukrainian; Urdu; Uzbek; Vai; Vietnamese; Vunjo; Walser; Wolof; Soga; Yangben; Yiddish; Yoruba; Cantonese; Standard Moroccan Tamazight; Chinese; Zulu |
| Batería | Technology: Li-ion; Voltage: 3871 |
| SD Version: | 1.1 7 |
KERNEL: Linux version 4.4.146+ (smartpie@smartpie-Server) (Android (4691093 based on r316199) clang version 6.0.2 (https://android.googlesource.com/toolchain/clang 183abd29fc496f55536e7d904e0abae47888fc7f) (https://android.googlesource.com/toolchain/llvm 34361f192e41ed6e4e8f9aca80a4ea7e9856f327) (based on LLVM 6.0.2svn)) #6 SMP PREEMPT Sat Jun 12 18:09:55 CST 2021
CODENAME: REL
Mainboard: land_rover_hy1920x720
BRAND: alps
CPU_ABI: arm64-v8a
CPU_ABI2:
DEVICE: land_rover_hy1920x720
DISPLAY: p60.210611
FINGERPRINT: alps/c200_en/c200_en:5.1.1/JOP40D/1524551747:user/test-keys
HARDWARE: mt8788
ID: PPR1.180610.011
TAGS: test-keys
Processor : AArch64 Processor rev 2 (aarch64)
processor : 0
BogoMIPS : 26.00
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
processor : 1
BogoMIPS : 26.00
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
processor : 2
BogoMIPS : 26.00
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
processor : 3
BogoMIPS : 26.00
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
processor : 4
BogoMIPS : 26.00
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x0
CPU part : 0xd09
CPU revision : 2
processor : 5
BogoMIPS : 26.00
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x0
CPU part : 0xd09
CPU revision : 2
processor : 6
BogoMIPS : 26.00
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x0
CPU part : 0xd09
CPU revision : 2
processor : 7
BogoMIPS : 26.00
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x0
CPU part : 0xd09
CPU revision : 2
Hardware : MT6771V/CT
GL_EXT_debug_marker
GL_ARM_rgba8
GL_ARM_mali_shader_binary
GL_OES_depth24
GL_OES_depth_texture
GL_OES_depth_texture_cube_map
GL_OES_packed_depth_stencil
GL_OES_rgb8_rgba8
GL_EXT_read_format_bgra
GL_OES_compressed_paletted_texture
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_standard_derivatives
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_EGL_image_external_essl3
GL_OES_EGL_sync
GL_OES_texture_npot
GL_OES_vertex_half_float
GL_OES_required_internalformat
GL_OES_vertex_array_object
GL_OES_mapbuffer
GL_EXT_texture_format_BGRA8888
GL_EXT_texture_rg
GL_EXT_texture_type_2_10_10_10_REV
GL_OES_fbo_render_mipmap
GL_OES_element_index_uint
GL_EXT_shadow_samplers
GL_OES_texture_compression_astc
GL_KHR_texture_compression_astc_ldr
GL_KHR_texture_compression_astc_hdr
GL_KHR_texture_compression_astc_sliced_3d
GL_KHR_debug
GL_EXT_occlusion_query_boolean
GL_EXT_disjoint_timer_query
GL_EXT_blend_minmax
GL_EXT_discard_framebuffer
GL_OES_get_program_binary
GL_OES_texture_3D
GL_EXT_texture_storage
GL_EXT_multisampled_render_to_texture
GL_EXT_multisampled_render_to_texture2
GL_OES_surfaceless_context
GL_OES_texture_stencil8
GL_EXT_shader_pixel_local_storage
GL_ARM_shader_framebuffer_fetch
GL_ARM_shader_framebuffer_fetch_depth_stencil
GL_ARM_mali_program_binary
GL_EXT_sRGB
GL_EXT_sRGB_write_control
GL_EXT_texture_sRGB_decode
GL_EXT_texture_sRGB_R8
GL_EXT_texture_sRGB_RG8
GL_KHR_blend_equation_advanced
GL_KHR_blend_equation_advanced_coherent
GL_OES_texture_storage_multisample_2d_array
GL_OES_shader_image_atomic
GL_EXT_robustness
GL_EXT_draw_buffers_indexed
GL_OES_draw_buffers_indexed
GL_EXT_texture_border_clamp
GL_OES_texture_border_clamp
GL_EXT_texture_cube_map_array
GL_OES_texture_cube_map_array
GL_OES_sample_variables
GL_OES_sample_shading
GL_OES_shader_multisample_interpolation
GL_EXT_shader_io_blocks
GL_OES_shader_io_blocks
GL_EXT_tessellation_shader
GL_OES_tessellation_shader
GL_EXT_primitive_bounding_box
GL_OES_primitive_bounding_box
GL_EXT_geometry_shader
GL_OES_geometry_shader
GL_ANDROID_extension_pack_es31a
GL_EXT_gpu_shader5
GL_OES_gpu_shader5
GL_EXT_texture_buffer
GL_OES_texture_buffer
GL_EXT_copy_image
GL_OES_copy_image
GL_EXT_shader_non_constant_global_initializers
GL_EXT_color_buffer_half_float
GL_EXT_color_buffer_float
GL_EXT_YUV_target
GL_OVR_multiview
GL_OVR_multiview2
GL_OVR_multiview_multisampled_render_to_texture
GL_KHR_robustness
GL_KHR_robust_buffer_access_behavior
GL_EXT_draw_elements_base_vertex
GL_OES_draw_elements_base_vertex
GL_EXT_protected_textures
GL_EXT_buffer_storage
GL_EXT_EGL_image_array
GL_EXT_texture_filter_anisotropic
[ 1165.193592] (4)[365:logd.auditd]type=1400 audit(1639319669.823:2112): avc: denied { open } for pid=415 comm="wifi@1.0-servic" path="/data/vendor/tombstones/wifi" dev="dm-2" ino=5029892 scontext=u:r:mtk_hal_wifi:s0 tcontext=u:object_r:aee_tombstone_data_file:s0 tclass=dir permissive=1
[ 1165.197625] (4)[365:logd.auditd]type=1400 audit(1639319669.955:2113): avc: denied { syslog_read } for pid=7931 comm="dmesg" scontext=u:r:untrusted_app_25:s0:c512,c768 tcontext=u:r:kernel:s0 tclass=system permissive=1
[ 1165.236781] (4)[3098:Binder:985_10]alarm_dev: alarm 2 set 1304.280000000
[ 1165.236800] -(4)[3098:Binder:985_10]alarmtimer_enqueue, 1304280000000
[ 1165.236829] (4)[3098:Binder:985_10]alarm_dev: alarm 3 set 1195.232000000
[ 1165.259033] (7)[1886:Binder:985_B]alarm_dev: alarm 2 set 1304.280000000
[ 1165.259055] (7)[1886:Binder:985_B]alarm_dev: alarm 3 set 1195.232000000
[ 1165.265664] (4)[415:wifi@1.0-servic][MTK-WIFI] WIFI_open[I]: major 153 minor 0 (pid 415)
[ 1165.265685] (4)[415:wifi@1.0-servic][MTK-WIFI] WIFI_write[I]: WIFI_write 0, length 2
[ 1165.297415] (5)[4817:tx_thread][wlan]wlanoidSetP2pMode:(P2P INFO) Set P2P enable[0] mode[0]
[ 1165.297432] (5)[4817:tx_thread][wlan]p2pRemove:(P2P INFO) Prepare to remove p2p...
[ 1165.297448] (5)[4817:tx_thread][wlan]p2pDevFsmStateTransition:(P2P STATE) [P2P_DEV]TRANSITION: [P2P_DEV_STATE_IDLE] -> [P2P_DEV_STATE_IDLE]
[ 1165.297466] (5)[4817:tx_thread][wlan]p2pRoleFsmStateTransition:(P2P STATE) [P2P_ROLE][0]TRANSITION: [P2P_ROLE_STATE_IDLE] -> [P2P_ROLE_STATE_IDLE]
[ 1165.297744] (4)[415:wifi@1.0-servic][MTK-WIFI] WIFI_write[I]: Turn off p2p/ap mode
[ 1165.297752] (4)[415:wifi@1.0-servic][HIF-SDIO][I]mtk_wcn_wmt_func_ctrl:wmt-exp: OPID(4) type(3) start
[ 1165.297795] (4)[473:mtk_wmtd_worker][HIF-SDIO][W]wmtd_worker_thread:opid: 0x21
[ 1165.297801] (4)[473:mtk_wmtd_worker][WMT-FUNC][W]wmt_func_wifi_off:WMT-FUNC: wmt wlan func on before wlan remove
[ 1165.297807] (4)[473:mtk_wmtd_worker][wlan]wlanRemove:(INIT INFO) Remove wlan!
[ 1165.297811] (4)[473:mtk_wmtd_worker][MTK-WIFI] register_set_p2p_mode_handler[I]: (pid 473) register set p2p mode handler (null)
[ 1165.301190] (7)[4817:tx_thread][wlan]tx_thread:(INIT INFO) tx_thread should stop now...
[ 1165.301208] (7)[4817:tx_thread][wlan]wlanReleasePendingOid:(INIT INFO) tx_thread stopped! Releasing pending OIDs ..
[ 1165.301259] (1)[473:mtk_wmtd_worker][wlan]wlanRemove:(INIT INFO) wlan thread stopped
[ 1165.306871] (5)[5233:Binder:985_12]alarm_dev: alarm 2 set 1304.280000000
[ 1165.306891] (5)[5233:Binder:985_12]alarm_dev: alarm 3 set 1195.232000000
[ 1165.306904] (5)[5233:Binder:985_12]alarm_dev: alarm 2 set 1304.280000000
[ 1165.306911] (5)[5233:Binder:985_12]alarm_dev: alarm 3 set 1195.232000000
[ 1165.314133] (5)[4822:IpClient.wlan0]alarm_dev: alarm 2 set 1304.280000000
[ 1165.314157] (5)[4822:IpClient.wlan0]alarm_dev: alarm 3 set 1195.232000000
[ 1165.314857] (5)[4822:IpClient.wlan0]alarm_dev: alarm 2 set 1304.280000000
[ 1165.314876] (5)[4822:IpClient.wlan0]alarm_dev: alarm 3 set 1195.232000000
[ 1165.315581] (5)[4822:IpClient.wlan0]alarm_dev: alarm 2 set 1304.280000000
[ 1165.315602] (5)[4822:IpClient.wlan0]alarm_dev: alarm 3 set 1195.232000000
[ 1165.321372] (6)[1886:Binder:985_B]alarm_dev: alarm 2 set 1304.280000000
[ 1165.321405] (6)[1886:Binder:985_B]alarm_dev: alarm 3 set 1195.232000000
[ 1165.322679] (7)[1533:Binder:985_6]alarm_dev: alarm 2 set 1304.280000000
[ 1165.322700] (7)[1533:Binder:985_6]alarm_dev: alarm 3 set 1195.232000000
[ 1165.322716] (7)[1533:Binder:985_6]alarm_dev: alarm 2 set 1304.280000000
[ 1165.322723] (7)[1533:Binder:985_6]alarm_dev: alarm 3 set 1195.232000000
[ 1165.323478] (7)[1533:Binder:985_6]alarm_dev: alarm 2 set 1304.280000000
[ 1165.323499] (7)[1533:Binder:985_6]alarm_dev: alarm 3 set 1195.232000000
[ 1165.323515] (7)[1533:Binder:985_6]alarm_dev: alarm 2 set 1304.280000000
[ 1165.323521] (7)[1533:Binder:985_6]alarm_dev: alarm 3 set 1195.232000000
[ 1165.324884] (7)[1886:Binder:985_B]alarm_dev: alarm 2 set 1170.319000000
[ 1165.334617] (6)[5233:Binder:985_12]alarm_dev: alarm 2 set 1165.442000000
[ 1165.334652] (6)[5233:Binder:985_12]alarm_dev: alarm 2 set 1165.442000000
[ 1165.335386] (6)[5233:Binder:985_12]alarm_dev: alarm 2 set 1165.442000000
[ 1165.335417] (6)[5233:Binder:985_12]alarm_dev: alarm 2 set 1165.442000000
[ 1165.337567] (6)[473:mtk_wmtd_worker][MTK-WIFI] update_driver_loaded_status[I]: update_driver_loaded_status: 0
[ 1165.337592] (6)[473:mtk_wmtd_worker][WMT-FUNC][W]wmt_func_wifi_off:WMT-FUNC: wmt call wlan remove ok
[ 1165.337623] (6)[473:mtk_wmtd_worker][STP-PSM] [I]_stp_psm_do_wait: STP is waiting state for ACT, i=1, state = 2
[ 1165.341171] (6)[5233:Binder:985_12]alarm_dev: alarm 2 set 1165.442000000
[ 1165.341467] (6)[5233:Binder:985_12]alarm_dev: alarm 2 set 1165.442000000
[ 1165.342733] (6)[5233:Binder:985_12]alarm_dev: alarm 2 set 1165.442000000
[ 1165.342788] (6)[5233:Binder:985_12]alarm_dev: alarm 2 set 1165.442000000
[ 1165.361274] (7)[473:mtk_wmtd_worker][STP-PSM] [I]_stp_psm_do_wait: +Total waits for ACT takes 23652 usec
[ 1165.361359] (6)[473:mtk_wmtd_worker][WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC OFF]status(b:2 f:0 g:2 w:0 lpbk:2 coredump:0 wmt:2 ant:0 sd1:0 sd2:0 stp:0)
[ 1165.361383] (5)[415:wifi@1.0-servic][HIF-SDIO][I]mtk_wcn_wmt_func_ctrl:OPID(33) type(3) ok
[ 1165.361390] (5)[415:wifi@1.0-servic][MTK-WIFI] WIFI_write[I]: WMT turn off WIFI OK!
[ 1165.361404] (5)[415:wifi@1.0-servic][MTK-WIFI] WIFI_close[I]: major 153 minor 0 (pid 415)
[ 1165.361950] (6)[1:init]init: PropSet [wlan.driver.status]=[unloaded] Done
[ 1165.369131] (0)[1164:WifiStateMachin]alarm_dev: alarm 2 set 1165.442000000
[ 1165.370406] (5)[365:logd.auditd]type=1400 audit(1639319669.955:2113): avc: denied { syslog_read } for pid=7931 comm="dmesg" scontext=u:r:untrusted_app_25:s0:c512,c768 tcontext=u:r:kernel:s0 tclass=system permissive=1
[ 1165.370451] (5)[365:logd.auditd]type=1400 audit(1639319670.131:2114): avc: denied { dac_override } for pid=7953 comm="stroke" capability=1 scontext=u:r:ipsec:s0 tcontext=u:r:ipsec:s0 tclass=capability permissive=1
[ 1165.370899] (5)[365:logd.auditd]type=1400 audit(1639319670.131:2114): avc: denied { dac_override } for pid=7953 comm="stroke" capability=1 scontext=u:r:ipsec:s0 tcontext=u:r:ipsec:s0 tclass=capability permissive=1
[ 1165.370902] (7)[7953:stroke]audit: audit_lost=1471 audit_rate_limit=5 audit_backlog_limit=64
[ 1165.370910] (7)[7953:stroke]audit: rate limit exceeded
[ 1165.370941] (5)[365:logd.auditd]type=1400 audit(1639319670.131:2115): avc: denied { read write } for pid=7953 comm="stroke" name="wake_lock" dev="sysfs" ino=5599 scontext=u:r:ipsec:s0 tcontext=u:object_r:sysfs_wake_lock:s0 tclass=file permissive=1
[ 1165.371030] (5)[365:logd.auditd]type=1400 audit(1639319670.131:2115): avc: denied { read write } for pid=7953 comm="stroke" name="wake_lock" dev="sysfs" ino=5599 scontext=u:r:ipsec:s0 tcontext=u:object_r:sysfs_wake_lock:s0 tclass=file permissive=1
[ 1165.371051] (5)[365:logd.auditd]type=1400 audit(1639319670.131:2116): avc: denied { open } for pid=7953 comm="stroke" path="/sys/power/wake_lock" dev="sysfs" ino=5599 scontext=u:r:ipsec:s0 tcontext=u:object_r:sysfs_wake_lock:s0 tclass=file permissive=1
[ 1165.371560] (4)[1178:Binder:985_3]alarm_dev: alarm 2 set 1165.442000000
[ 1165.377871] (6)[1178:Binder:985_3]alarm_dev: alarm 2 set 1165.442000000
[ 1165.377928] (6)[1178:Binder:985_3]alarm_dev: alarm 2 set 1165.442000000
[ 1165.379592] (6)[1178:Binder:985_3]alarm_dev: alarm 2 set 1165.442000000
[ 1165.379644] (6)[1178:Binder:985_3]alarm_dev: alarm 2 set 1165.442000000
[ 1165.390278] (7)[415:wifi@1.0-servic][MTK-WIFI] WIFI_open[I]: major 153 minor 0 (pid 415)
[ 1165.390312] (7)[415:wifi@1.0-servic][MTK-WIFI] WIFI_write[I]: WIFI_write 1, length 2
[ 1165.390326] (7)[415:wifi@1.0-servic][HIF-SDIO][I]mtk_wcn_wmt_func_ctrl:wmt-exp: OPID(3) type(3) start
[ 1165.390409] (7)[473:mtk_wmtd_worker][HIF-SDIO][W]wmtd_worker_thread:opid: 0x20
[ 1165.390419] (7)[473:mtk_wmtd_worker][WMT-CORE][E]opfunc_wlan_probe(3307):not implemented yet hifType: 0x2, unspecified wifi_hif
[ 1165.390433] (7)[473:mtk_wmtd_worker][WMT-FUNC][W]wmt_func_wifi_on:WMT-FUNC: wmt wlan func on before wlan probe
[ 1165.390462] (7)[473:mtk_wmtd_worker][wlan]wlanNetCreate:(INIT INFO) net_device prDev(0xffffffc0434b5800) allocated
[ 1165.390715] (6)[1178:Binder:985_3]alarm_dev: alarm 2 set 1165.442000000
[ 1165.390759] (6)[1178:Binder:985_3]alarm_dev: alarm 2 set 1165.442000000
[ 1165.393765] (7)[473:mtk_wmtd_worker][MTK-WIFI] update_driver_loaded_status[I]: update_driver_loaded_status: 0
[ 1165.393788] (7)[473:mtk_wmtd_worker][wlan]glLoadNvram:(INIT INFO) fgNvramAvailable = 1
[ 1165.399089] (0)[473:mtk_wmtd_worker][wlan]nicpmSetDriverOwn:(NIC INFO) DRIVER OWN, status=1 count=5
[ 1165.399141] (0)[473:mtk_wmtd_worker][wlan]nicInitializeAdapter:(NIC INFO) Chip ID[6771] Version[E1]
[ 1165.399701] (0)[473:mtk_wmtd_worker][wlan]nicTxInitialize:(TX INFO) Init PID pool mach:64 size:512
[ 1165.401167] (0)[473:mtk_wmtd_worker][wlan]kalFirmwareOpen:(INIT INFO) Open FW image /vendor/firmware/WIFI_RAM_CODE_6759 success
[ 1165.406384] (0)[473:mtk_wmtd_worker][wlan]wlanAdapterStart:(INIT INFO) FW download end
[ 1165.418315] (6)[1178:Binder:985_3]alarm_dev: alarm 2 set 1165.442000000
[ 1165.418371] (6)[1178:Binder:985_3]alarm_dev: alarm 2 set 1165.442000000
[ 1165.427173] (6)[1886:Binder:985_B]alarm_dev: alarm 2 set 1165.442000000
[ 1165.434849] (2)[67:conn-md-thread][CONN-MD-DFT][I]conn_md_log_print_msg:send message to Modem, 1164.939 1165.304 1165.304 1165.426 1165.434
[ 1165.437605] (2)[473:mtk_wmtd_worker][wlan]wlanAdapterStart:(INIT INFO) Ready bit asserted
[ 1165.439449] (2)[473:mtk_wmtd_worker][wlan]wlanQueryNicCapability:(NIC INFO) FW Ver DEC[4.4] HEX[4.4], Driver Ver[0.0]
[ 1165.439492] (2)[473:mtk_wmtd_worker][wlan]wlanUpdateNetworkAddress:(INIT INFO) Using host-supplied MAC address
[ 1165.439525] (2)[473:mtk_wmtd_worker][wlan]kalIndicateStatusAndComplete:(INIT INFO) [wifi] wlan%d netif_carrier_off
[ 1165.439823] (2)[473:mtk_wmtd_worker][wlan]nicFreq2ChannelNum:(NIC WARN) Return Invalid Channelnum = 0
[ 1165.439858] (2)[473:mtk_wmtd_worker][wlan]rlmDomainGetDomainInfo:(RLM INFO) No matched country code, use the default regulatory domain
[ 1165.439872] (2)[473:mtk_wmtd_worker][wlan]rlmDomainSendPwrLimitCmd:(RLM INFO) Domain: ValidCC =0x0000, ucNum=0
[ 1165.441895] (5)[7958:tx_thread][wlan]tx_thread:(INIT INFO) tx_thread:7958 starts running...
[ 1165.443564] (4)[7959:hif_thread][wlan]hif_thread:(INIT INFO) hif_thread:7959 starts running...
[ 1165.444433] (6)[7958:tx_thread]RF Stat WF_Sx LPAON_LPCR Fail! = 0x5cfc001, 0
[ 1165.444868] (7)[7960:rx_thread][wlan]rx_thread:(INIT INFO) rx_thread:7960 starts running...
[ 1165.445178] (5)[473:mtk_wmtd_worker][MTK-WIFI] update_driver_loaded_status[I]: update_driver_loaded_status: 1
[ 1165.445194] (7)[1201:Binder:985_4][wlan]wlanProbe:(INIT INFO) MAC address: 00:18:84:da:5f:48
[ 1165.447759] (7)[1201:Binder:985_4]alarm_dev: alarm 2 set 1165.442000000
[ 1165.447816] (7)[1201:Binder:985_4]alarm_dev: alarm 2 set 1165.442000000
[ 1165.448495] (7)[473:mtk_wmtd_worker][MTK-WIFI] register_set_p2p_mode_handler[I]: (pid 473) register set p2p mode handler ffffff8000eea478
[ 1165.448567] (7)[473:mtk_wmtd_worker][WMT-FUNC][W]wmt_func_wifi_on:WMT-FUNC: wmt call wlan probe ok
[ 1165.448575] (7)[473:mtk_wmtd_worker][HIF-SDIO][I]wmt_ctrl_bgw_desense_ctrl:wmt-ctrl:send native cmd(1)
[ 1165.448586] (7)[473:mtk_wmtd_worker][WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:2 f:0 g:2 w:2 lpbk:2 coredump:0 wmt:2 ant:0 sd1:0 sd2:0 stp:0)
[ 1165.448623] (5)[415:wifi@1.0-servic][HIF-SDIO][I]mtk_wcn_wmt_func_ctrl:OPID(32) type(3) ok
[ 1165.448631] (5)[415:wifi@1.0-servic][MTK-WIFI] WIFI_write[I]: WMT turn on WIFI success!
[ 1165.448651] (5)[415:wifi@1.0-servic][MTK-WIFI] WIFI_close[I]: major 153 minor 0 (pid 415)
[ 1165.449096] (7)[1:init]init: PropSet [wlan.driver.status]=[ok] Done
[ 1165.449927] (5)[7958:tx_thread]eLNA[5G]HG = 0
[ 1165.449948] (5)[7958:tx_thread]PwrLimit: num=0
[ 1165.449948]
[ 1165.449953] (5)[7958:tx_thread]SAR 0 63 63 63 63 63
[ 1165.449956] (5)[7958:tx_thread]
[ 1165.449956]
[ 1165.451013] (1)[1145:AlarmManager]alarm_dev: alarm 2 set 1175.362000000
[ 1165.452001] (1)[1145:AlarmManager]alarm_dev: alarm 2 set 1175.362000000
[ 1165.452181] (7)[1:init]init: Received control message `start` for `wpa_supplicant` from pid: 629 (/system/bin/wificond)
[ 1165.452695] (7)[1:init]init: starting service `wpa_supplicant`...
[ 1165.454029] (0)[3098:Binder:985_10]alarm_dev: alarm 2 set 1175.362000000
[ 1165.454114] (0)[3098:Binder:985_10]alarm_dev: alarm 2 set 1175.362000000
[ 1165.454309] (4)[7961:init]init: Created socket `/dev/socket/wpa_wlan0`, mode 660, user 1010, group 1010
[ 1165.467101] (4)[3098:Binder:985_10]alarm_dev: alarm 2 set 1175.362000000
[ 1165.475506] (0)[1054:kworker/u16:18][Power/PPM] Shrink 35 PPM logs from last 500 ms!
[ 1165.475543] (0)[1054:kworker/u16:18][Power/PPM] (0x60)(9441)(0)(0-7)(15)(0)(4)(4) (15)(11)(4)(4)
[ 1165.486915] (0)[5695:kworker/0:2][Power/PPM] (0x60)(9654)(0)(0-7)(15)(0)(4)(4) (15)(0)(4)(4)
[ 1165.495104] (6)[5429:kworker/u16:0][Power/PPM] (0x60)(9654)(0)(0-7)(15)(10)(4)(4) (15)(14)(4)(4)
[ 1165.506230] (6)[5121:kworker/6:0][Power/PPM] (0x60)(9460)(0)(0-7)(15)(0)(4)(4) (15)(0)(4)(4)
[ 1165.516506] (6)[1050:kworker/u16:14][Power/PPM] (0x60)(9460)(0)(0-7)(15)(10)(4)(4) (15)(14)(4)(4)
[ 1165.556828] (0)[415:wifi@1.0-servic][MTK-WIFI] WIFI_open[I]: major 153 minor 0 (pid 415)
[ 1165.556874] (0)[415:wifi@1.0-servic][MTK-WIFI] WIFI_write[I]: WIFI_write STA, length 4
[ 1165.557012] (1)[7958:tx_thread][wlan]wlanoidSetP2pMode:(P2P INFO) Set P2P enable[1] mode[0]
[ 1165.557196] (1)[7958:tx_thread][wlan]p2pDevFsmStateTransition:(P2P STATE) [P2P_DEV]TRANSITION: [P2P_DEV_STATE_IDLE] -> [P2P_DEV_STATE_IDLE]
[ 1165.557265] (1)[7958:tx_thread][wlan]p2pRoleFsmStateTransition:(P2P STATE) [P2P_ROLE][0]TRANSITION: [P2P_ROLE_STATE_IDLE] -> [P2P_ROLE_STATE_IDLE]
[ 1165.557283] (1)[7958:tx_thread][wlan]p2pLaunch:(P2P INFO) Register p2p succeed
[ 1165.559053] (1)[415:wifi@1.0-servic][MTK-WIFI] WIFI_write[I]: Set wlan mode 0 --> 2
[ 1165.559104] (1)[415:wifi@1.0-servic][MTK-WIFI] WIFI_close[I]: major 153 minor 0 (pid 415)
[ 1165.560435] (1)[7958:tx_thread][wlan]wlanoidSet802dot11PowerSaveProfile:(OID INFO) Set AIS Network BSS(0) PS mode to CAM (0)
[ 1165.560627] (0)[415:wifi@1.0-servic]IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1165.562340] (3)[7958:tx_thread]bssActivateCtrl 4 1 1 | 4 02:18:84:da:5f:48 0 | connection state: prev/cur 1/1
[ 1165.562372] (3)[7958:tx_thread]bssActivateCtrl 4 0 1 | 4 00:00:00:00:00:00 0 | connection state: prev/cur 1/1
[ 1165.562484] (3)[7958:tx_thread]bssActivateCtrl 1 1 1 | 2 02:18:84:da:5f:48 0 | connection state: prev/cur 1/1
[ 1165.562921] (5)[7958:tx_thread]CMD:[80:4:38075312][2:5:38075316][24:6:38075533][40:7:38075642][42:8:38075642][f:9:38075643][f:10:38075644][49:11:38075645][36:12:38075647][48:13:38075648]
[ 1165.563201] (4)[7958:tx_thread]CMD:[2:14:38075653][59:15:38075653][90:16:38075655][11:17:38079332][11:18:38079338][14:19:38079341][11:20:38079342][a:21:38079348][c1:22:38079348][5:23:38079350]
[ 1165.602960] (3)[1164:WifiStateMachin][wlan]priv_support_driver_cmd:(REQ INFO) priv_support_driver_cmd: driver cmd "set_fw_param alwaysscanen 1" on wlan0
[ 1165.603019] (1)[7958:tx_thread][wlan]wlanoidSetFwParam:(OID INFO) Fw Params: alwaysscanen 1
[ 1165.605816] (3)[7958:tx_thread]CFG: Command=alwaysscanen, value=1
[ 1165.605847] (3)[7958:tx_thread]EasyDbg apply 88 CMD_ALWAYSSCANEN_VALUE val 0x1
[ 1165.605847]
[ 1165.608537] (6)[1164:WifiStateMachin]alarm_dev: alarm 2 set 1175.362000000
[ 1165.615927] (4)[2148:mnld][STP-PSM] [I]stp_psm_disable_by_tx_rx_density: STP speed rx:0 tx:2444
[ 1165.615944] (4)[2148:mnld][STP-PSM] [I]stp_psm_disable_by_tx_rx_density: Low speed,Enable monitor
[ 1165.747178] (3)[0:swapper/3]Power/swap DP: No enter --- SODI3: No enter --- SODI: No enter ---
[ 1165.747215] (3)[0:swapper/3]mcdi cpu: 7, 8, 25, 36, 816, 780, 576, 507, cluster : 0, 503, pause = 0, multi core = 0, residency = 0, last core = 0, avail cpu = 00ff, cluster = 0003, enabled = 1, max_s_state = 5 (buck_off = 0), system_idle_hint = 00000004
[ 1165.747215]
[ 1165.979535] (0)[5695:kworker/0:2][Power/PPM] Shrink 42 PPM logs from last 504 ms!
[ 1165.979572] (0)[5695:kworker/0:2][Power/PPM] (0x60)(8538)(0)(0-7)(15)(0)(4)(4) (15)(0)(4)(4)
[ 1165.988118] (3)[5429:kworker/u16:0][Power/PPM] (0x60)(8618)(0)(0-7)(15)(10)(4)(4) (15)(14)(4)(4)
[ 1165.999293] (3)[6781:kworker/3:2][Power/PPM] (0x60)(8895)(0)(0-7)(15)(0)(4)(4) (15)(0)(4)(4)
[ 1166.009951] (3)[5429:kworker/u16:0][Power/PPM] (0x60)(8538)(0)(0-7)(15)(10)(4)(4) (15)(14)(4)(4)
[ 1166.021109] (3)[6781:kworker/3:2][Power/PPM] (0x60)(8712)(0)(0-7)(15)(0)(4)(4) (15)(0)(4)(4)
[ 1166.481966] (2)[1050:kworker/u16:14][Power/PPM] Shrink 42 PPM logs from last 502 ms!
[ 1166.482010] (2)[1050:kworker/u16:14][Power/PPM] (0x60)(8531)(0)(0-7)(15)(10)(4)(4) (15)(14)(4)(4)
[ 1166.493096] (2)[7470:kworker/2:1][Power/PPM] (0x60)(8531)(0)(0-7)(15)(0)(4)(4) (15)(0)(4)(4)
[ 1166.500811] (0)[1050:kworker/u16:14][Power/PPM] (0x60)(8435)(0)(0-7)(15)(10)(4)(4) (15)(14)(4)(4)
[ 1166.511910] (0)[5695:kworker/0:2][Power/PPM] (0x60)(8618)(0)(0-7)(15)(0)(4)(4) (15)(0)(4)(4)
[ 1166.522901] (3)[1050:kworker/u16:14][Power/PPM] (0x60)(8712)(0)(0-7)(15)(10)(4)(4) (15)(14)(4)(4)
[ 1166.619323] (1)[2148:mnld][STP-PSM] [I]stp_psm_disable_by_tx_rx_density: STP speed rx:0 tx:978
[ 1166.619364] (1)[2148:mnld][STP-PSM] [I]stp_psm_disable_by_tx_rx_density: Low speed,Enable monitor
[ 1166.885367] (0)[1:init]init: starting service `preloadmedia`...
[ 1166.891849] (4)[365:logd.auditd]type=1400 audit(1639319670.131:2116): avc: denied { open } for pid=7953 comm="stroke" path="/sys/power/wake_lock" dev="sysfs" ino=5599 scontext=u:r:ipsec:s0 tcontext=u:object_r:sysfs_wake_lock:s0 tclass=file permissive=1
[ 1166.891921] (4)[365:logd.auditd]type=1400 audit(1639319671.651:2120): avc: denied { getattr } for pid=7967 comm="preloadmedia.sh" path="/system/bin/sh" dev="dm-0" ino=2330 scontext=u:r:preloadmedia:s0 tcontext=u:object_r:shell_exec:s0 tclass=file permissive=1
[ 1166.895830] (4)[365:logd.auditd]type=1400 audit(1639319671.651:2120): avc: denied { getattr } for pid=7967 comm="preloadmedia.sh" path="/system/bin/sh" dev="dm-0" ino=2330 scontext=u:r:preloadmedia:s0 tcontext=u:object_r:shell_exec:s0 tclass=file permissive=1
[ 1166.895897] (4)[365:logd.auditd]type=1400 audit(1639319671.655:2121): avc: denied { read } for pid=7967 comm="preloadmedia.sh" path="/system/bin/sh" dev="dm-0" ino=2330 scontext=u:r:preloadmedia:s0 tcontext=u:object_r:shell_exec:s0 tclass=file permissive=1
[ 1166.906553] (3)[7967:preloadmedia.sh]audit: audit_lost=1474 audit_rate_limit=5 audit_backlog_limit=64
[ 1166.906586] (3)[7967:preloadmedia.sh]audit: rate limit exceeded
[ 1166.906660] (2)[365:logd.auditd]type=1400 audit(1639319671.655:2121): avc: denied { read } for pid=7967 comm="preloadmedia.sh" path="/system/bin/sh" dev="dm-0" ino=2330 scontext=u:r:preloadmedia:s0 tcontext=u:object_r:shell_exec:s0 tclass=file permissive=1
[ 1166.906704] (2)[365:logd.auditd]type=1400 audit(1639319671.667:2122): avc: denied { read } for pid=7967 comm="preloadmedia.sh" name="sdcard" dev="tmpfs" ino=8292 scontext=u:r:preloadmedia:s0 tcontext=u:object_r:tmpfs:s0 tclass=lnk_file permissive=1
[ 1166.906916] (2)[365:logd.auditd]type=1400 audit(1639319671.667:2122): avc: denied { read } for pid=7967 comm="preloadmedia.sh" name="sdcard" dev="tmpfs" ino=8292 scontext=u:r:preloadmedia:s0 tcontext=u:object_r:tmpfs:s0 tclass=lnk_file permissive=1
[ 1166.906938] (2)[365:logd.auditd]type=1400 audit(1639319671.667:2123): avc: denied { read } for pid=7967 comm="preloadmedia.sh" name="primary" dev="tmpfs" ino=8293 scontext=u:r:preloadmedia:s0 tcontext=u:object_r:storage_file:s0 tclass=lnk_file permissive=1
[ 1166.907022] (2)[365:logd.auditd]type=1400 audit(1639319671.667:2123): avc: denied { read } for pid=7967 comm="preloadmedia.sh" name="primary" dev="tmpfs" ino=8293 scontext=u:r:preloadmedia:s0 tcontext=u:object_r:storage_file:s0 tclass=lnk_file permissive=1
[ 1166.907042] (2)[365:logd.auditd]type=1400 audit(1639319671.667:2124): avc: denied { read } for pid=7967 comm="preloadmedia.sh" name="primary" dev="tmpfs" ino=27832 scontext=u:r:preloadmedia:s0 tcontext=u:object_r:mnt_user_file:s0 tclass=lnk_file permissive=1
[ 1166.909851] (0)[1:init]init: Service `preloadmedia` (pid 7967) exited with status 0
[ 1166.909927] (0)[1:init]init: Sending signal 9 to service `preloadmedia` (pid 7967) process group...
[ 1166.910176] (0)[1:init]libprocessgroup: Successfully killed process cgroup uid 0 pid 7967 in 0ms
[ 1166.986132] (1)[5676:kworker/1:2][Power/PPM] Shrink 42 PPM logs from last 504 ms!
[ 1166.986157] (1)[5676:kworker/1:2][Power/PPM] (0x60)(5204)(0)(0-7)(15)(0)(4)(4) (15)(0)(4)(4)
[ 1166.993333] (2)[1050:kworker/u16:14][Power/PPM] (0x60)(4766)(0)(0-7)(15)(10)(4)(4) (15)(14)(4)(4)
[ 1167.005072] (2)[7470:kworker/2:1][Power/PPM] (0x60)(5204)(0)(0-7)(15)(0)(4)(4) (15)(0)(4)(4)
[ 1167.012240] (1)[1052:kworker/u16:16][Power/PPM] (0x60)(4914)(0)(0-7)(15)(10)(4)(4) (15)(14)(4)(4)
[ 1167.023421] (1)[5676:kworker/1:2][Power/PPM] (0x60)(5204)(0)(0-7)(15)(0)(4)(4) (15)(0)(4)(4)
[ 1167.242019] (3)[1164:WifiStateMachin][wlan]priv_support_driver_cmd:(REQ INFO) priv_support_driver_cmd: driver cmd "set_fw_param alwaysscanen 0" on wlan0
[ 1167.242111] (1)[7958:tx_thread][wlan]wlanoidSetFwParam:(OID INFO) Fw Params: alwaysscanen 0
[ 1167.247842] (2)[7958:tx_thread]CFG: Command=alwaysscanen, value=0
[ 1167.247892] (2)[7958:tx_thread]EasyDbg apply 88 CMD_ALWAYSSCANEN_VALUE val 0x0
[ 1167.247892]
[ 1167.248279] (0)[67:conn-md-thread][CONN-MD-DFT][I]conn_md_log_print_msg:send message to Modem, 1165.605 1167.248
[ 1167.264240] (0)[1:init]init: Received control message `stop` for `wpa_supplicant` from pid: 629 (/system/bin/wificond)
[ 1167.264284] (0)[1:init]init: Sending signal 9 to service `wpa_supplicant` (pid 7961) process group...
[ 1167.269889] (2)[1:init]libprocessgroup: Successfully killed process cgroup uid 0 pid 7961 in 5ms
[ 1167.271782] (2)[1:init]init: Service `wpa_supplicant` (pid 7961) received signal 9
[ 1167.395566] (1)[1050:kworker/u16:14][mt6358_get_auxadc_value] ch_idx = 2, channel = 3, bat_cur = 0, reg_val = 0x39f, adc_result = 814
[ 1167.495570] (3)[6781:kworker/3:2][Power/PPM] Shrink 43 PPM logs from last 509 ms!
[ 1167.495612] (3)[6781:kworker/3:2][Power/PPM] (0x60)(7007)(0)(0-7)(15)(0)(4)(4) (15)(0)(4)(4)
[ 1167.504374] (3)[1054:kworker/u16:18][Power/PPM] (0x60)(6878)(0)(0-7)(15)(10)(4)(4) (15)(14)(4)(4)
[ 1167.515510] (3)[6781:kworker/3:2][Power/PPM] (0x60)(7160)(0)(0-7)(15)(0)(4)(4) (15)(0)(4)(4)
[ 1167.526517] (0)[1054:kworker/u16:18][Power/PPM] (0x60)(7258)(0)(0-7)(15)(10)(4)(4) (15)(14)(4)(4)
[ 1167.537849] (0)[5695:kworker/0:2][Power/PPM] (0x60)(7143)(0)(0-7)(15)(0)(4)(4) (15)(0)(4)(4)
[ 1167.576557] (3)[415:wifi@1.0-servic][MTK-WIFI] WIFI_open[I]: major 153 minor 0 (pid 415)
[ 1167.576625] (3)[415:wifi@1.0-servic][MTK-WIFI] WIFI_write[I]: WIFI_write 0, length 2
[ 1167.597492] (2)[7958:tx_thread][wlan]wlanoidSetP2pMode:(P2P INFO) Set P2P enable[0] mode[0]
[ 1167.597538] (2)[7958:tx_thread][wlan]p2pRemove:(P2P INFO) Prepare to remove p2p...
[ 1167.597582] (2)[7958:tx_thread][wlan]p2pDevFsmStateTransition:(P2P STATE) [P2P_DEV]TRANSITION: [P2P_DEV_STATE_IDLE] -> [P2P_DEV_STATE_IDLE]
[ 1167.597640] (2)[7958:tx_thread][wlan]p2pRoleFsmStateTransition:(P2P STATE) [P2P_ROLE][0]TRANSITION: [P2P_ROLE_STATE_IDLE] -> [P2P_ROLE_STATE_IDLE]
[ 1167.597923] (1)[415:wifi@1.0-servic][MTK-WIFI] WIFI_write[I]: Turn off p2p/ap mode
[ 1167.597944] (1)[415:wifi@1.0-servic][HIF-SDIO][I]mtk_wcn_wmt_func_ctrl:wmt-exp: OPID(4) type(3) start
[ 1167.598560] (7)[473:mtk_wmtd_worker][HIF-SDIO][W]wmtd_worker_thread:opid: 0x21
[ 1167.598581] (7)[473:mtk_wmtd_worker][WMT-FUNC][W]wmt_func_wifi_off:WMT-FUNC: wmt wlan func on before wlan remove
[ 1167.598600] (7)[473:mtk_wmtd_worker][wlan]wlanRemove:(INIT INFO) Remove wlan!
[ 1167.598610] (7)[473:mtk_wmtd_worker][MTK-WIFI] register_set_p2p_mode_handler[I]: (pid 473) register set p2p mode handler (null)
[ 1167.601640] (2)[7958:tx_thread][wlan]tx_thread:(INIT INFO) tx_thread should stop now...
[ 1167.601660] (2)[7958:tx_thread][wlan]wlanReleasePendingOid:(INIT INFO) tx_thread stopped! Releasing pending OIDs ..
[ 1167.602761] (7)[473:mtk_wmtd_worker][wlan]wlanRemove:(INIT INFO) wlan thread stopped
[ 1167.617501] (2)[470:mtk_stp_btm][WMT-DFT][E]wmt_idc_msg_to_lte_handing(216):there is no coex data in stp buffer
[ 1167.633642] (0)[473:mtk_wmtd_worker][MTK-WIFI] update_driver_loaded_status[I]: update_driver_loaded_status: 0
[ 1167.633687] (0)[473:mtk_wmtd_worker][WMT-FUNC][W]wmt_func_wifi_off:WMT-FUNC: wmt call wlan remove ok
[ 1167.633898] (0)[473:mtk_wmtd_worker][WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC OFF]status(b:2 f:0 g:2 w:0 lpbk:2 coredump:0 wmt:2 ant:0 sd1:0 sd2:0 stp:0)
[ 1167.633948] (1)[415:wifi@1.0-servic][HIF-SDIO][I]mtk_wcn_wmt_func_ctrl:OPID(33) type(3) ok
[ 1167.633959] (1)[415:wifi@1.0-servic][MTK-WIFI] WIFI_write[I]: WMT turn off WIFI OK!
[ 1167.633991] (1)[415:wifi@1.0-servic][MTK-WIFI] WIFI_close[I]: major 153 minor 0 (pid 415)
[ 1167.635010] (2)[1:init]init: PropSet [wlan.driver.status]=[unloaded] Done
[ 1167.642241] (2)[415:wifi@1.0-servic][MTK-WIFI] WIFI_open[I]: major 153 minor 0 (pid 415)
[ 1167.642294] (2)[415:wifi@1.0-servic][MTK-WIFI] WIFI_write[I]: WIFI_write 1, length 2
[ 1167.642316] (2)[415:wifi@1.0-servic][HIF-SDIO][I]mtk_wcn_wmt_func_ctrl:wmt-exp: OPID(3) type(3) start
[ 1167.645291] (2)[473:mtk_wmtd_worker][HIF-SDIO][W]wmtd_worker_thread:opid: 0x20
[ 1167.645317] (2)[473:mtk_wmtd_worker][WMT-CORE][E]opfunc_wlan_probe(3307):not implemented yet hifType: 0x2, unspecified wifi_hif
[ 1167.645341] (2)[473:mtk_wmtd_worker][WMT-FUNC][W]wmt_func_wifi_on:WMT-FUNC: wmt wlan func on before wlan probe
[ 1167.645381] (2)[473:mtk_wmtd_worker][wlan]wlanNetCreate:(INIT INFO) net_device prDev(0xffffffc04d680800) allocated
[ 1167.646159] (2)[473:mtk_wmtd_worker][MTK-WIFI] update_driver_loaded_status[I]: update_driver_loaded_status: 0
[ 1167.646184] (2)[473:mtk_wmtd_worker][wlan]glLoadNvram:(INIT INFO) fgNvramAvailable = 1
[ 1167.651273] (1)[473:mtk_wmtd_worker][wlan]nicInitializeAdapter:(NIC INFO) Chip ID[6771] Version[E1]
[ 1167.651970] (1)[473:mtk_wmtd_worker][wlan]nicTxInitialize:(TX INFO) Init PID pool mach:64 size:512
[ 1167.653794] (1)[473:mtk_wmtd_worker][wlan]kalFirmwareOpen:(INIT INFO) Open FW image /vendor/firmware/WIFI_RAM_CODE_6759 success
[ 1167.661190] (2)[473:mtk_wmtd_worker][wlan]wlanAdapterStart:(INIT INFO) FW download end
[ 1167.693274] (0)[473:mtk_wmtd_worker][wlan]wlanAdapterStart:(INIT INFO) Ready bit asserted
[ 1167.694904] (0)[473:mtk_wmtd_worker][wlan]wlanQueryNicCapability:(NIC INFO) FW Ver DEC[4.4] HEX[4.4], Driver Ver[0.0]
[ 1167.694979] (0)[473:mtk_wmtd_worker][wlan]wlanUpdateNetworkAddress:(INIT INFO) Using host-supplied MAC address
[ 1167.695007] (0)[473:mtk_wmtd_worker][wlan]kalIndicateStatusAndComplete:(INIT INFO) [wifi] wlan%d netif_carrier_off
[ 1167.695335] (0)[473:mtk_wmtd_worker][wlan]nicFreq2ChannelNum:(NIC WARN) Return Invalid Channelnum = 0
[ 1167.695367] (0)[473:mtk_wmtd_worker][wlan]rlmDomainGetDomainInfo:(RLM INFO) No matched country code, use the default regulatory domain
[ 1167.695380] (0)[473:mtk_wmtd_worker][wlan]rlmDomainSendPwrLimitCmd:(RLM INFO) Domain: ValidCC =0x0000, ucNum=0
[ 1167.696272] (6)[7971:tx_thread][wlan]tx_thread:(INIT INFO) tx_thread:7971 starts running...
[ 1167.696803] (7)[7972:hif_thread][wlan]hif_thread:(INIT INFO) hif_thread:7972 starts running...
[ 1167.696910] (5)[7971:tx_thread]RF Stat WF_Sx LPAON_LPCR Fail! = 0x5cfc001, 0
[ 1167.697201] (4)[473:mtk_wmtd_worker][MTK-WIFI] update_driver_loaded_status[I]: update_driver_loaded_status: 1
[ 1167.697217] (6)[7973:rx_thread][wlan]wlanProbe:(INIT INFO) MAC address: 00:18:84:da:5f:48
[ 1167.697475] (6)[7973:rx_thread][wlan]rx_thread:(INIT INFO) rx_thread:7973 starts running...
[ 1167.699534] (4)[473:mtk_wmtd_worker][MTK-WIFI] register_set_p2p_mode_handler[I]: (pid 473) register set p2p mode handler ffffff8000eea478
[ 1167.699621] (4)[473:mtk_wmtd_worker][WMT-FUNC][W]wmt_func_wifi_on:WMT-FUNC: wmt call wlan probe ok
[ 1167.699634] (4)[473:mtk_wmtd_worker][HIF-SDIO][I]wmt_ctrl_bgw_desense_ctrl:wmt-ctrl:send native cmd(1)
[ 1167.699650] (4)[473:mtk_wmtd_worker][WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:2 f:0 g:2 w:2 lpbk:2 coredump:0 wmt:2 ant:0 sd1:0 sd2:0 stp:0)
[ 1167.699701] (3)[415:wifi@1.0-servic][HIF-SDIO][I]mtk_wcn_wmt_func_ctrl:OPID(32) type(3) ok
[ 1167.699718] (3)[415:wifi@1.0-servic][MTK-WIFI] WIFI_write[I]: WMT turn on WIFI success!
[ 1167.699740] (3)[415:wifi@1.0-servic][MTK-WIFI] WIFI_close[I]: major 153 minor 0 (pid 415)
[ 1167.700476] (4)[1:init]init: PropSet [wlan.driver.status]=[ok] Done
[ 1167.703506] (4)[1:init]init: Received control message `start` for `wpa_supplicant` from pid: 629 (/system/bin/wificond)
[ 1167.703852] (6)[7971:tx_thread]eLNA[5G]HG = 0
[ 1167.703870] (6)[7971:tx_thread]PwrLimit: num=0
[ 1167.703870]
[ 1167.703880] (6)[7971:tx_thread]SAR 0 63 63 63 63 63
[ 1167.703887] (6)[7971:tx_thread]
[ 1167.703887]
[ 1167.704091] (4)[1:init]init: starting service `wpa_supplicant`...
[ 1167.706391] (7)[7974:init]init: Created socket `/dev/socket/wpa_wlan0`, mode 660, user 1010, group 1010
[ 1167.721106] (6)[7972:hif_thread][wlan]nicpmSetDriverOwn:(NIC INFO) DRIVER OWN, status=1 count=5
[ 1167.721166] (6)[7972:hif_thread][wlan]nicpmSetFWOwn:(NIC INFO) FW OWN Failed due to pending INT
[ 1167.809977] (2)[415:wifi@1.0-servic][MTK-WIFI] WIFI_open[I]: major 153 minor 0 (pid 415)
[ 1167.810029] (2)[415:wifi@1.0-servic][MTK-WIFI] WIFI_write[I]: WIFI_write STA, length 4
[ 1167.810098] (1)[7971:tx_thread][wlan]wlanoidSetP2pMode:(P2P INFO) Set P2P enable[1] mode[0]
[ 1167.810604] (1)[7971:tx_thread][wlan]p2pDevFsmStateTransition:(P2P STATE) [P2P_DEV]TRANSITION: [P2P_DEV_STATE_IDLE] -> [P2P_DEV_STATE_IDLE]
[ 1167.810657] (1)[7971:tx_thread][wlan]p2pRoleFsmStateTransition:(P2P STATE) [P2P_ROLE][0]TRANSITION: [P2P_ROLE_STATE_IDLE] -> [P2P_ROLE_STATE_IDLE]
[ 1167.810677] (1)[7971:tx_thread][wlan]p2pLaunch:(P2P INFO) Register p2p succeed
[ 1167.812393] (0)[415:wifi@1.0-servic][MTK-WIFI] WIFI_write[I]: Set wlan mode 0 --> 2
[ 1167.812441] (0)[415:wifi@1.0-servic][MTK-WIFI] WIFI_close[I]: major 153 minor 0 (pid 415)
[ 1167.814795] (0)[7971:tx_thread][wlan]wlanoidSet802dot11PowerSaveProfile:(OID INFO) Set AIS Network BSS(0) PS mode to CAM (0)
[ 1167.815187] (3)[415:wifi@1.0-servic]IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1167.815961] (2)[7971:tx_thread]bssActivateCtrl 4 1 1 | 4 02:18:84:da:5f:48 0 | connection state: prev/cur 1/1
[ 1167.816151] (2)[7971:tx_thread]bssActivateCtrl 4 0 1 | 4 00:00:00:00:00:00 0 | connection state: prev/cur 1/1
[ 1167.816264] (2)[7971:tx_thread]bssActivateCtrl 1 1 1 | 2 02:18:84:da:5f:48 0 | connection state: prev/cur 1/1
[ 1167.816589] (0)[7971:tx_thread]CMD:[80:4:38149219][2:5:38149296][24:6:38149371][40:7:38149479][42:8:38149480][f:9:38149481][f:10:38149482][49:11:38149482][36:12:38149484][48:13:38149484]
[ 1167.816788] (2)[7971:tx_thread]CMD:[2:14:38149490][59:15:38149490][90:16:38149492][11:17:38153185][11:18:38153191][14:19:38153194][11:20:38153195][a:21:38153201][5:22:38153201][c1:23:38153202]
[ 1167.864577] (5)[7971:tx_thread][wlan]wlanoidSet802dot11PowerSaveProfile:(OID INFO) Set P2P Network BSS(1) PS mode to CAM (0)
[ 1167.864966] (7)[7974:wpa_supplicant]IPv6: ADDRCONF(NETDEV_UP): p2p0: link is not ready
[ 1167.883676] (1)[415:wifi@1.0-servic][wlan]mtk_cfg80211_vendor_set_scan_mac_oui:(REQ INFO) Set MAC oui: 00-0c-e7
[ 1167.885270] (7)[7971:tx_thread][wlan]rlmDomainSendPwrLimitCmd:(RLM INFO) Domain: ValidCC =RU, ChNum=64
[ 1167.891429] (3)[7971:tx_thread]PwrLimit: num=64
[ 1167.891429]
[ 1167.893305] (6)[7974:wpa_supplicant][wlan]priv_support_driver_cmd:(REQ INFO) priv_support_driver_cmd: driver cmd "SETSUSPENDMODE 0" on wlan0
[ 1167.893329] (6)[7974:wpa_supplicant][wlan]priv_driver_set_suspend_mode:(REQ INFO) priv_driver_set_suspend_mode: Set suspend mode [0]
[ 1167.893334] (6)[7974:wpa_supplicant][wlan]priv_driver_set_suspend_mode:(REQ INFO) priv_driver_set_suspend_mode: Already in suspend mode, SKIP!
[ 1167.893613] (5)[7971:tx_thread][wlan]wlanoidSet802dot11PowerSaveProfile:(OID INFO) Set AIS Network BSS(0) PS mode to FAST PS (2)
[ 1167.900262] (5)[7971:tx_thread][wlan]mtk_cfg80211_vendor_get_roaming_capabilities:(REQ INFO) Get roaming capabilities: max black/whitelist=16/16
[ 1167.900587] (5)[7971:tx_thread][wlan]wlanoidConfigRoaming:(REQ INFO) Get the number of blacklist=0
[ 1167.901812] (5)[1164:WifiStateMachin]alarm_dev: alarm 2 set 1175.362000000
[ 1167.901836] -(5)[1164:WifiStateMachin]alarmtimer_enqueue: 39 callbacks suppressed
[ 1167.901838] -(5)[1164:WifiStateMachin]alarmtimer_enqueue, 1175362000000
[ 1167.902924] (5)[1164:WifiStateMachin]alarm_dev: alarm 2 set 1175.362000000
[ 1167.902949] -(5)[1164:WifiStateMachin]alarmtimer_enqueue, 1175362000000
[ 1167.902968] (5)[1164:WifiStateMachin]alarm_dev: alarm 2 set 1175.362000000
[ 1167.902974] -(5)[1164:WifiStateMachin]alarmtimer_enqueue, 1175362000000
[ 1167.903480] (5)[1164:WifiStateMachin]alarm_dev: alarm 2 set 1175.362000000
[ 1167.903501] -(5)[1164:WifiStateMachin]alarmtimer_enqueue, 1175362000000
[ 1167.906622] (2)[629:wificond][wlan]mtk_cfg80211_scan:(REQ INFO) request->n_ssids=1
[ 1167.906636] (2)[629:wificond][wlan]mtk_cfg80211_scan:(REQ INFO) i=0, num_ssid-- for wildcard scan
[ 1167.906651] (2)[629:wificond][wlan]mtk_cfg80211_scan:(REQ INFO) mtk_cfg80211_scan(), n_ssids=1, num_ssid=0
[ 1167.906674] (2)[629:wificond][wlan]kalParseRandomMac:(SCN INFO) random mac=22:df:0a:85:18:3a mac_addr=02:00:00:00:00:00, mac_addr_mask=03:00:00:00:00:00
[ 1167.906850] (3)[7971:tx_thread][wlan]aisFsmSteps:(AIS STATE) [13] TRANSITION: [0] -> [2]
[ 1167.906876] (3)[7971:tx_thread][wlan]aisCheckNeighborApValidity:(AIS INFO) timeout, Cur 867904, Rcv at 0, Valid Interval 0
[ 1167.906884] (3)[7971:tx_thread][wlan]aisFsmSteps:(AIS INFO) Full2Partial ucWFDEnable=0
[ 1167.906892] (3)[7971:tx_thread][wlan]aisPreScan:(AIS INFO) scan start at 867904
[ 1167.906921] (3)[7971:tx_thread][wlan]scnFsmSteps:(SCN STATE) [19] TRANSITION: [0] -> [1]
[ 1167.906965] (3)[7971:tx_thread][wlan]scnSendScanReqV3:(SCN INFO) ScnReqV4: ScnType=1, SSIDType=1, Num=0, ChType=0, Num=0, Dwell=0, RMac=22:df:0a:85:18:3a, FuncM=1, Ver=4, IELen=0->42
[ 1167.907156] (6)[7972:hif_thread][wlan]nicTxCmd:(TX INFO) TX CMD: ID[0x03] SEQ[38] SET[1] LEN[552]
[ 1167.907520] (2)[1165:WifiScanningSer]alarm_dev: alarm 2 set 1175.362000000
[ 1167.907532] -(2)[1165:WifiScanningSer]alarmtimer_enqueue, 1175362000000
[ 1167.909505] (3)[7971:tx_thread]bssActivateCtrl 0 1 0 | 1 00:18:84:da:5f:48 1 | connection state: prev/cur 1/1
[ 1167.909665] (2)[7971:tx_thread]SCN: ScanReqGeneric 1|0|1|0|0|0|0|1|0|0|42|1|[ff:ff:ff:ff:ff:ff]|4
[ 1167.909719] (2)[7971:tx_thread]SCN: SCAN_STATE_SCAN_START
[ 1167.909752] (2)[7971:tx_thread]pmSetAllBcn2Mcu: Bss 0, HwParse 0, MPTCR0=10, MPTCR2=0, IEchk 0
wlan_drv_gen3 4841472 0 - Live 0x0000000000000000 (O)
wmt_chrdev_wifi 20480 1 wlan_drv_gen3, Live 0x0000000000000000 (O)
gps_drv 61440 1 - Live 0x0000000000000000 (O)
fmradio_drv 172032 0 - Live 0x0000000000000000 (O)
bt_drv 24576 1 - Live 0x0000000000000000 (O)
wmt_drv 1167360 6 wlan_drv_gen3,wmt_chrdev_wifi,gps_drv,fmradio_drv,bt_drv, Live 0x0000000000000000 (O)
fpsgo 16384 0 - Live 0x0000000000000000 (PO)
RAM: 0 MB
Flash: 1.000 GB; 128 GB (116.484 GB actual)
zram0: 1.000 GB
mmcblk0: 116.484 GB
Pantalla táctil para alps land_rover_hy1920x720
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
Batería de repuesto para alps land_rover_hy1920x720
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
Fundas para alps land_rover_hy1920x720
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
| Find Similar devices | |
|---|---|
| Same CPU: | |
| Same Display resolution: | |
| Same ro.build.description: | |
