RITMIX RMD-1050 规格

一般信息
操作系统的详细信息
CPU信息
图形处理器细节
WiFi内核信息
build.prop
的内核模块
存储器映射

一般规格
生产厂家	RITMIX
型号	RMD-1050
Android版	4.0.4; 20121031; SDK15
中央处理单元	1 core; ARMv7 Processor rev 2 (v7l) exDroid; Max: 1008,0 MHz; Min: 60,0 MHz
显示	1024 x 768; DPI: 120; Evaluated Size: 10,7"
触摸屏	Multitouch 5 points
图形处理器	Mali-400 MP; ARM; OpenGL ES-CM 1.1; OpenGL ES 2.0
内存RAM	1024 MB (960 MB available)
快闪记忆体	8 GB Build-in (7.407 GB actual); 8 GB (7.422 GB actual)
沟通
电话	GSM
WiFi	8188eu; IEEE 802.11 b/g/n; Realtek RTL8188E; AP Mode
USB主机	Yes
蓝牙	No
全球定位系统	Yes
高级功能
前置摄像头	Photo: 1.9 MP; Max: 1600x1200; Video: 1.9 MP; Max: 1600x1200; Focus: auto; No flash
背照相机	Photo: 0.3 MP; Max size: 640x480; Video: 0.3 MP; Max: 640x480; Focus: auto; No flash
传感器	MMA 3-axis Accelerometer (Freescale Semiconductor Inc.); range: 0...19,613; resolution: 0,467 (2,381%); power: 0,3mA;
震动模式	Yes
支持的语言	40; Arabic; Bulgarian; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Vietnamese; Chinese
电池	Technology: LiFe; Voltage: 4055
External USB Ethernet	Realtek 8150 based adapters; MCS7830 based adapters
SD Version:	1.1 7

KERNEL: Linux version 3.0.8+ (lj@INGENIC-CROSS) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #48 PREEMPT Wed Oct 31 14:55:37 CST 2012
CODENAME: REL
Mainboard: crane
BRAND: RITMIX
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: crane-lg971
DISPLAY: crane_lg971-eng 4.0.4 IMM76D 20121031
FINGERPRINT: SoftWinnner/crane_lg971/crane-lg971:4.0.4/IMM76D/20121031:eng/test-keys
HARDWARE: sun4i
ID: IMM76D
TAGS: test-keys

Processor : ARMv7 Processor rev 2 (v7l)
BogoMIPS : 1001.88
Features : swp half thumb fastmult vfp edsp neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc08
CPU revision : 2
Hardware : sun4i
Revision : 0000
Serial : 0a81cb5a575348488072895416236796

GL_OES_texture_npot
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_standard_derivatives
GL_OES_EGL_image
GL_OES_depth24
GL_ARM_rgba8
GL_ARM_mali_shader_binary
GL_OES_depth_texture
GL_OES_packed_depth_stencil
GL_EXT_texture_format_BGRA8888
GL_EXT_blend_minmax
GL_OES_EGL_image_external
GL_OES_EGL_sync
GL_OES_rgb8_rgba8
GL_EXT_multisampled_render_to_texture
GL_EXT_discard_framebuffer

<6>[ 1049.240211] usb 4-1: reset high speed USB device number 2 using sw-ehci
<7>[ 1049.391541] -r871xu_dev_remove, done
<7>[ 1049.396272] -rtw_drv_halt
<7>[ 1049.396284] sw_usb_disable_hcd: usbc_num = 2
<7>[ 1049.396294] [sw-ehci2]: sw_usb_disable_ehci
<7>[ 1049.396308] [sw-ehci2]: remove, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0xc0876bb0
<6>[ 1049.396321] sw-ehci sw-ehci.2: remove, state 1
<6>[ 1049.396348] usb usb4: USB disconnect, device number 1
<6>[ 1049.396357] usb 4-1: USB disconnect, device number 2
<6>[ 1049.443044] sw-ehci sw-ehci.2: USB bus 4 deregistered
<7>[ 1049.443067] [sw-ehci2]: close clock
<7>[ 1049.443102] [sw-ohci2]: sw_usb_disable_ohci
<7>[ 1049.443113] [sw-ohci2]: remove, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc0876cc4
<6>[ 1049.443124] sw-ohci sw-ohci.2: remove, state 1
<6>[ 1049.443146] usb usb5: USB disconnect, device number 1
<6>[ 1049.445227] sw-ohci sw-ohci.2: USB bus 5 deregistered
<7>[ 1049.445253] [sw-ohci2]: Set USB Power OFF
<7>[ 1049.445263] [sw-ohci2]: close clock
<7>[ 1049.446092] +rtw_drv_halt
<7>[ 1049.446104] ##########rtw_suspend_lock_uninit###########
<6>[ 1049.446115] usbcore: deregistering interface driver rtl8188eu
<7>[ 1049.450400] -rtw_drv_halt
<7>[ 1049.450416] sw_usb_disable_hcd: usbc_num = 2
<7>[ 1049.450427] WRN:L853(drivers/usb/host/ehci_sun4i.c):ERR: sw_ehci is disable, can not disable again
<7>[ 1049.450439] WRN:L740(drivers/usb/host/ohci_sun4i.c):ERR: sw_ohci is disable, can not disable again
<7>[ 1050.485768] sw_usb_enable_hcd: usbc_num = 2
<7>[ 1050.513407] [sw-ehci2]: sw_usb_enable_ehci
<7>[ 1050.521698] [sw-ehci2]: probe, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0xc0876bb0
<7>[ 1050.565792] [sw-ehci2]: open clock
<7>[ 1050.653271] [sw-ehci2]: Set USB Power ON
<6>[ 1050.653294] sw-ehci sw-ehci.2: SW USB2.0 `Enhanced` Host Controller (EHCI) Driver
<6>[ 1050.653332] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
<6>[ 1050.653446] sw-ehci sw-ehci.2: irq 40, io mem 0xf1c1c000
<6>[ 1050.687863] sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
<7>[ 1050.687884] ehci_irq: port change detect
<6>[ 1050.688531] hub 4-0:1.0: USB hub found
<6>[ 1050.688557] hub 4-0:1.0: 1 port detected
<7>[ 1050.688819] [sw-ohci2]: sw_usb_enable_ohci
<7>[ 1050.688832] [sw-ohci2]: probe, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc0876cc4
<7>[ 1050.688846] [sw-ohci2]: open clock
<6>[ 1050.826988] sw-ohci sw-ohci.2: SW USB2.0 `Open` Host Controller (OHCI) Driver
<6>[ 1050.827034] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 5
<6>[ 1050.827093] sw-ohci sw-ohci.2: irq 65, io mem 0xf1c1c400
<6>[ 1050.887103] hub 5-0:1.0: USB hub found
<6>[ 1050.892258] hub 5-0:1.0: 1 port detected
<7>[ 1050.898054] rtw driver version=v3.4.2_3727.20120404
<7>[ 1050.908189] Build at: Sep 20 2012 10:24:48
<7>[ 1050.912395] ##########rtw_suspend_lock_init ###########
<6>[ 1050.920199] usbcore: registered new interface driver rtl8192cu
<6>[ 1051.010306] usb 4-1: new high speed USB device number 2 using sw-ehci
<7>[ 1051.161089] sw_usb_enable_hcd: usbc_num = 2
<7>[ 1051.169260] register rtw_netdev_ops to netdev_ops
<7>[ 1051.169275] rtw_wdev_alloc
<7>[ 1051.169562] CHIP TYPE: RTL8188C_8192C
<7>[ 1051.169577]
<7>[ 1051.169580] usb_endpoint_descriptor(0):
<7>[ 1051.169586] bLength=7
<7>[ 1051.169591] bDescriptorType=5
<7>[ 1051.169597] bEndpointAddress=81
<7>[ 1051.169602] wMaxPacketSize=200
<7>[ 1051.169609] bInterval=0
<7>[ 1051.169614] RT_usb_endpoint_is_bulk_in = 1
<7>[ 1051.169620]
<7>[ 1051.169623] usb_endpoint_descriptor(1):
<7>[ 1051.169629] bLength=7
<7>[ 1051.169634] bDescriptorType=5
<7>[ 1051.169639] bEndpointAddress=2
<7>[ 1051.169644] wMaxPacketSize=200
<7>[ 1051.169649] bInterval=0
<7>[ 1051.169655] RT_usb_endpoint_is_bulk_out = 2
<7>[ 1051.169661]
<7>[ 1051.169664] usb_endpoint_descriptor(2):
<7>[ 1051.169670] bLength=7
<7>[ 1051.169674] bDescriptorType=5
<7>[ 1051.169679] bEndpointAddress=3
<7>[ 1051.169685] wMaxPacketSize=200
<7>[ 1051.169690] bInterval=0
<7>[ 1051.169695] RT_usb_endpoint_is_bulk_out = 3
<7>[ 1051.169701]
<7>[ 1051.169704] usb_endpoint_descriptor(3):
<7>[ 1051.169709] bLength=7
<7>[ 1051.169714] bDescriptorType=5
<7>[ 1051.169719] bEndpointAddress=84
<7>[ 1051.169725] wMaxPacketSize=40
<7>[ 1051.169730] bInterval=1
<7>[ 1051.169735] RT_usb_endpoint_is_int_in = 4, Interval = 1
<7>[ 1051.169743] nr_endpoint=4, in_num=2, out_num=2
<7>[ 1051.169748]
<7>[ 1051.169752] USB_SPEED_HIGH
<7>[ 1051.172723] Chip Version ID: VERSION_NORMAL_UMC_CHIP_88C_B_CUT.
<7>[ 1051.172739] RF_Type is 3!!
<7>[ 1051.172913] WRN:L906(drivers/usb/host/ehci_sun4i.c):ERR: sw_ehci is already enable, can not enable again
<7>[ 1051.172927] WRN:L793(drivers/usb/host/ohci_sun4i.c):ERR: sw_ohci is already enable, can not enable again
<7>[ 1051.172938] rtw driver version=v4.1.0_3945.20120502
<7>[ 1051.172945] Build at: Sep 20 2012 10:24:44
<7>[ 1051.172952] ##########rtw_suspend_lock_init ###########
<7>[ 1051.173117] EEPROM type is E-FUSE
<7>[ 1051.173125] ====> ReadAdapterInfo8192C
<7>[ 1051.174425] Boot from EFUSE, Autoload OK !
<6>[ 1051.174788] usbcore: registered new interface driver rtl8188eu
<7>[ 1051.623642] EEPROMVID = 0x0bda
<7>[ 1051.635389] EEPROMPID = 0x8176
<7>[ 1051.691422] EEPROMCustomerID : 0x00
<7>[ 1051.709629] EEPROMSubCustomerID: 0x00
<7>[ 1051.709640] RT_CustomerID: 0x00
<7>[ 1051.709654] _ReadMACAddress MAC Address from EFUSE = 00:14:00:00:75:7e
<7>[ 1051.709685] EEPROMRegulatory = 0x0
<7>[ 1051.709692] _ReadBoardType(0)
<7>[ 1051.709699] BT Coexistance = disable
<7>[ 1051.709705] RT_ChannelPlan: 0x0a
<7>[ 1051.709714] _ReadPSSetting...bHWPwrPindetect(0)-bHWPowerdown(0) ,bSupportRemoteWakeup(0)
<7>[ 1051.709723] ### PS params=> power_mgnt(1),usbss_enable(0) ###
<7>[ 1051.709730] ### AntDivCfg(0)
<7>[ 1051.709736] readAdapterInfo_8192CU(): REPLACEMENT = 1
<7>[ 1051.709745] <==== ReadAdapterInfo8192C in 530 ms
<7>[ 1051.767010] rtw_register_early_suspend
<7>[ 1051.767063] rtw_macaddr_cfg MAC Address = 00:14:00:00:75:7e
<7>[ 1051.767073] MAC Address from pnetdev->dev_addr= 00:14:00:00:75:7e
<7>[ 1051.773902] bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0
<7>[ 1051.800202] rtw_android_priv_cmd: Android private cmd "BLOCK 1" on wlan0
<5>[ 1051.800706] init: starting `wpa_supplicant`
<6>[ 1051.802868] init: Created socket `/dev/socket/wpa_wlan0` with mode `660`, user `1010`, group `1010`
<7>[ 1051.890771] cfg80211_rtw_change_iface call netdev_open
<7>[ 1051.890788] +871x_drv - drv_open, bup=0
<7>[ 1051.962648] ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_UMC_B
<7>[ 1051.962667] FirmwareDownload92C accquire FW from embedded image
<7>[ 1051.962677] fw_ver=v80, fw_subver=0, sig=0x88c0
<7>[ 1052.033229] fw download ok!
<7>[ 1052.037175] Set RF Chip ID to RF_6052 and RF type to 1T1R.
<7>[ 1052.527271] IQK:Start!!!
<7>[ 1052.562384] Path A IQK Success!!
<7>[ 1052.605377] Path A IQK Success!!
<7>[ 1052.637182] IQK: final_candidate is 0
<7>[ 1052.647371] IQK: RegE94=103 RegE9C=13 RegEA4=fe RegEAC=2 RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0
<7>[ 1052.647384] Path A IQ Calibration Success !
<7>[ 1052.834641] pdmpriv->TxPowerTrackControl = 1
<7>[ 1052.845637] MAC Address from REG_MACID = 00:14:00:00:75:7e
<7>[ 1052.852317] rtl8192cu_hal_init in 960ms
<7>[ 1052.868925] MAC Address = 00:14:00:00:75:7e
<7>[ 1052.884670] rtw_cfg80211_init_wiphy:rf_type=3
<7>[ 1052.889041] -871x_drv - drv_open, bup=1
<7>[ 1052.901791] cfg80211_rtw_change_iface, old_iftype=6, new_iftype=2
<7>[ 1052.930715] +871x_drv - drv_open, bup=1
<7>[ 1052.947230] -871x_drv - drv_open, bup=1
<7>[ 1052.948799] cfg80211_rtw_set_power_mgmt
<6>[ 1052.949793] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[ 1052.994835] cfg80211_rtw_flush_pmksa
<7>[ 1053.076840] cfg80211_rtw_change_station
<7>[ 1053.109468] cfg80211_rtw_change_station
<7>[ 1053.115073] cfg80211_rtw_change_station
<7>[ 1053.119136] rtw_android_priv_cmd: Android private cmd "P2P_DEV_ADDR" on wlan0
<7>[ 1053.176266] rtw_android_priv_cmd: Android private cmd "BLOCK 0" on wlan0
<7>[ 1053.251673] rtw_android_priv_cmd: Android private cmd "BTCOEXSCAN-STOP" on wlan0
<7>[ 1053.252189] rtw_android_priv_cmd: Android private cmd "RXFILTER-ADD 3" on wlan0
<7>[ 1053.252398] rtw_android_priv_cmd: Android private cmd "RXFILTER-START" on wlan0
<7>[ 1053.252592] rtw_android_priv_cmd: Android private cmd "RXFILTER-STOP" on wlan0
<7>[ 1053.252768] rtw_android_priv_cmd: Android private cmd "RXFILTER-REMOVE 2" on wlan0
<7>[ 1053.252940] rtw_android_priv_cmd: Android private cmd "RXFILTER-START" on wlan0
<7>[ 1053.253876] rtw_android_priv_cmd: Android private cmd "SETBAND 0" on wlan0
<7>[ 1053.254197] rtw_android_priv_cmd: Android private cmd "SCAN-ACTIVE" on wlan0
<7>[ 1053.254512] rtw_android_priv_cmd: Android private cmd "SCAN-PASSIVE" on wlan0
<4>[ 1053.418583] usb_modeswitch. used greatest stack depth: 4840 bytes left
<6>[ 1053.418813] init: waitpid returned pid 2641, status = 00000000
<3>[ 1053.418837] init: untracked pid 2641 exited
<7>[ 1054.120394] cfg80211_rtw_change_station
<7>[ 1054.565524] survey done event(25)
<7>[ 1054.567196]
<7>[ 1054.567206] =>cfg80211_rtw_connect
<7>[ 1054.567223] privacy=1, key= (null), key_len=0, key_idx=0
<7>[ 1054.567239] ssid=ASUS, len=4
<7>[ 1054.567250] bssid=60:a4:4c:78:f5:2c
<7>[ 1054.567259] matched by bssid
<7>[ 1054.567270] rtw_cfg80211_set_wpa_version, wpa_version=2
<7>[ 1054.567280] rtw_cfg80211_set_auth_type, nl80211_auth_type=0
<7>[ 1054.567292] rtw_cfg80211_set_cipher, ucast=1, cipher=0xfac04
<7>[ 1054.567304] rtw_cfg80211_set_cipher, ucast=0, cipher=0xfac04
<7>[ 1054.567315] rtw_cfg80211_set_key_mgt, key_mgt=0xfac02
<7>[ 1054.567324] cfg80211_rtw_connect, ie_len=22
<7>[ 1054.567335] set wpa_ie(length:22):
<7>[ 1054.567348] 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x04
<7>[ 1054.567360] 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
<7>[ 1054.567373] 0x00 0x0f 0xac 0x02 0x00 0x00 0x00 0x00
<7>[ 1054.567386] got wpa2_ie
<7>[ 1054.567411] Set SSID under fw_state=0x00000008
<7>[ 1054.567437] [by_bssid:0][assoc_ssid:ASUS][to_roaming:0] new candidate: ASUS(60:a4:4c:78:f5:2c) rssi:-57
<7>[ 1054.567456] rtw_select_and_join_from_scanned_queue: candidate: ASUS(60:a4:4c:78:f5:2c)
<7>[ 1054.567484] rtw_restructure_ht_ie IEEE80211_HT_CAP_MAX_AMSDU is set
<7>[ 1054.567500] link to Broadcom AP
<7>[ 1054.567514] set ssid:dot11AuthAlgrthm=2, dot11PrivacyAlgrthm=4, dot118021XGrpPrivacy=4
<7>[ 1054.567528] <=cfg80211_rtw_connect, ret 0
<7>[ 1054.567704] cfg80211_rtw_change_station
<7>[ 1054.567805] cfg80211_rtw_change_station
<7>[ 1054.567893] cfg80211_rtw_change_station

# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IMM76D
ro.build.display.id=crane_lg971-eng 4.0.4 IMM76D 20121031
ro.build.version.incremental=20121031
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=2012年 10月 31日星期三 15:24:26 CST
ro.build.date.utc=1351668266
ro.build.type=eng
ro.build.user=lj
ro.build.host=INGENIC-CROSS
ro.build.tags=test-keys
ro.product.model=RMD-1050
ro.product.brand=RITMIX
ro.product.name=crane_lg971
ro.product.device=crane-lg971
ro.product.board=crane
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=unknown
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=exDroid
# ro.build.product is obsolete; use ro.product.device
ro.build.product=crane-lg971
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=crane_lg971-eng 4.0.4 IMM76D 20121031 test-keys
ro.build.fingerprint=SoftWinnner/crane_lg971/crane-lg971:4.0.4/IMM76D/20121031:eng/test-keys
ro.build.characteristics=tablet
# end build properties
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=Ring_Synth_04.ogg
ro.config.notification_sound=pixiedust.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=256m
ro.kernel.android.checkjni=0
persist.sys.timezone=Europe/Moscow
persist.sys.language=ru
persist.sys.country=RU
wifi.interface=wlan0
wifi.supplicant_scan_interval=15
debug.egl.hw=1
ro.display.switch=1
ro.opengles.version=131072
persist.sys.strictmode.visual=0
persist.sys.strictmode.disable=1
hwui.render_dirty_regions=false
persist.sys.usb.config=mass_storage,adb
persist.service.adb.enable=1
ro.property.tabletUI=true
ro.sf.hwrotation=180
audio.without.earpiece=true
ro.udisk.lable=RMD-1050
ro.product.firmware=1.4rc3
ro.sf.lcd_density=120
ro.setupwizard.mode=OPTIONAL
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt

8188eu 581006 0 - Live 0xbf0b5000
8192cu 575431 0 - Live 0xbf1ef000
rtl8150 8910 0 - Live 0xbf0b1000
mcs7830 6557 0 - Live 0xbf0ab000
qf9700 8513 0 - Live 0xbf0a4000
asix 22500 0 - Live 0xbf099000
usbnet 23745 3 mcs7830,qf9700,asix, Live 0xbf08d000
sun4i_csi0 27946 0 - Live 0xbf082000
gc2015 15595 0 - Live 0xbf07a000
gt2005 15140 1 - Live 0xbf072000
gc0308 14208 1 - Live 0xbf06a000
videobuf_dma_contig 5659 1 sun4i_csi0, Live 0xbf065000
videobuf_core 18067 2 sun4i_csi0,videobuf_dma_contig, Live 0xbf05b000
mma7660 6525 0 - Live 0xbf055000
mali 130145 12 - Live 0xbf028000
ump 42150 17 mali, Live 0xbf017000
ft5x_ts 56192 0 - Live 0xbf004000
sun4i_vibrator 2278 0 - Live 0xbf000000

RAM: 1024 MB (960 MB available)

System RAM: 448.000MB
Mali Sdram: 64.000MB
System RAM: 512.000MB

Flash: 8 GB Build-in (7.407 GB actual); 8 GB (7.422 GB actual)

mmcblk0: 7.422 GB
nand: 7.407 GB

Find Similar devices
Same CPU:
Same Display resolution:
Same ro.build.description:

触摸屏为 RITMIX RMD-1050

新电池 RITMIX RMD-1050

占地面积 RITMIX RMD-1050