类似的装置在数据库中是: ALCATEL ONE TOUCH 992D
一般规格 | |
---|---|
生产厂家 | TCT |
型号 | ALCATEL ONE TOUCH 992D |
Android版 | 4.0.4; vD5U-0; SDK15 |
中央处理单元 | 2 cores; ARMv7 Processor rev 0 (v7l); Max: 1001,0 MHz; Min: 250,2 MHz |
显示 | 800 x 480; DPI: 240; Evaluated Size: 3,9" |
触摸屏 | Multitouch 2 points |
图形处理器 | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.8@905891 |
内存RAM | 512 MB (486 MB available) |
快闪记忆体 | 4 GB (3.566 GB actual); 4 GB (3.693 GB actual) (见存储器映射选项卡) |
沟通 | |
电话 | GSM, Dual SIM; Net: GPRS |
WiFi | wlan; IEEE 802.11 a/b/g/n; MediaTek MT6620; AP Mode |
USB主机 | No |
蓝牙 | Bluetooth 4.0+HS |
全球定位系统 | Yes |
高级功能 | |
前置摄像头 | Photo: 4.9 MP; Max: 2560x1920; Focus: auto continuous-picture continuous-video macro infinity manual fullscan; Flash modes: auto on off torch |
背照相机 | Photo: 0.3 MP; Max size: 640x480; Focus: infinity; No flash |
传感器 | yamaha530 3-axis Magnetic Field sensor (Aichi Steel); range: 0...600; resolution: 0,002 (0%); power: 0,25mA; |
bma222 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; | |
stk31xx/cm3623 Proximity Sensor (Sitronix/Capella); range: 0...1; resolution: 1 (100%); power: 0,13mA; | |
stk31xx/cm3623 Light Sensor (Sitronix/Capella); range: 0...10240; resolution: 1 (0,01%); power: 0,13mA; | |
震动模式 | Yes |
支持的语言 | 43; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
电池 | Technology: Li-ion; Voltage: 3689 |
FM radio | 76 to 108MHz |
SD Version: | 1.1 5 |
KERNEL: Linux version 3.0.13 (android-bld@aclgcl-ubnt157) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Thu Oct 11 10:12:48 CST 2012
CODENAME: REL
Mainboard: Martell_lite
BRAND: TCT
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: Martell_lite_GSM
DISPLAY: SLPA.ICS
FINGERPRINT: TCT/Martell_lite/Martell_lite_GSM:4.0.4/IMM76D/vD5U-0:user/release-keys
HARDWARE: mt6577
ID: IMM76D
TAGS: release-keys
Processor : ARMv7 Processor rev 0 (v7l)
processor : 0
BogoMIPS : 1993.93
processor : 1
BogoMIPS : 2000.48
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc09
CPU revision : 0
Hardware : MT6577
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<7>[ 8325.474552] (1)WQ_WARN: cpu:4, proc:kworker/u:1, dur: 28068616 > 8ms
<7>[ 8325.474590] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 8325.482775] (0)[7212:dmesg] exit
<7>[ 8325.482982] (0)[7212:dmesg] sig 17 to [7210:AsyncTask #2]
<7>[ 8325.491489] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 11540616 > 8ms
<7>[ 8325.491525] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 8325.510043] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 11453616 > 8ms
<7>[ 8325.510075] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 8325.591650] (1)[304:WifiStateMachin] fork [7213:WifiStateMachin]
<7>[ 8325.593439] (1)WQ_WARN: cpu:4, proc:kworker/u:1, dur: 10030231 > 8ms
<7>[ 8325.593482] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 8325.594659] (0)[7213:WifiStateMachin] set proc[7213] name: ->[loadDriverThrea]
<7>[ 8325.612854] (0)WQ_WARN: cpu:4, proc:kworker/u:1, dur: 13579000 > 8ms
<7>[ 8325.612898] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 8325.643800] (1)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 23245615 > 8ms
<7>[ 8325.643840] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 8325.660716] (1)WQ_WARN: cpu:4, proc:kworker/u:1, dur: 11053307 > 8ms
<7>[ 8325.660749] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 8325.677655] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 11657077 > 8ms
<7>[ 8325.677697] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 8325.694571] (0)WQ_WARN: cpu:4, proc:kworker/u:1, dur: 13299769 > 8ms
<7>[ 8325.694605] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 8325.705972] (0)[7196:Thread-465] exit
<7>[ 8325.711518] (0)WQ_WARN: cpu:4, proc:kworker/u:1, dur: 10407538 > 8ms
<7>[ 8325.711555] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 8325.728521] (0)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 13489231 > 8ms
<7>[ 8325.728551] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 8325.728586] (0)WQ_WARN: cpu:0, proc:kworker/0:1, dur: 310054000 > 8ms
<7>[ 8325.728604] (0)work: thermal_zone_device_check+0x0/0x18
<5>[ 8325.791804] (1)init: starting `orientationd`
<7>[ 8325.793192] (1)[1:init] fork [7214:init]
<7>[ 8325.798248] (0)[7214:init] set proc[7214] name: ->[orientationd]
<7>[ 8325.799695] (1)[7202:Thread-467] exit
<6>[ 8325.801225] (1)[WLAN] rfkill_set_block(blocked 0)
<6>[ 8325.801237] (1)[WLAN] Power on
<3>[ 8325.801251] (1)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[ 8325.801269] (1)[STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[ 8325.801308] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[ 8325.801321] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(GPIO112)
<3>[ 8325.801332] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO124)
<3>[ 8325.801341] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(not defined)
<3>[ 8325.801352] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[ 8325.801363] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO13)
<3>[ 8325.801373] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(14)
<3>[ 8325.801383] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO15)
<3>[ 8325.801394] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(18)
<3>[ 8325.801404] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<3>[ 8325.801414] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[ 8325.801425] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[ 8325.801435] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[ 8325.801445] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[ 8325.801455] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[ 8325.801465] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_CK(GPIO56)
<3>[ 8325.801476] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_WS(GPIO57)
<3>[ 8325.801486] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_DAT(GPIO58)
<3>[ 8325.801496] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(GPIO72)
<3>[ 8325.801506] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(GPIO122)
<3>[ 8325.801516] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[ 8325.801528] (1)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<3>[ 8325.801546] (1)[WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<7>[ 8325.804320] (0)[7214:orientationd] exit
<7>[ 8325.804474] (0)[7214:orientationd] sig 17 to [1:init]
<5>[ 8325.804666] (1)init: process `orientationd`, pid 7214 exited
<5>[ 8325.804686] (1)init: process `orientationd` killing any children in process group
<7>[ 8325.844808] (1)[259:er.ServerThread] fork [7215:er.ServerThread]
<7>[ 8325.845398] (0)[7215:er.ServerThread] set proc[7215] name: ->[Thread-473]
<7>[ 8325.907199] (1)[468:iatek.bluetooth] fork [7216:iatek.bluetooth]
<7>[ 8325.907267] (0)[7216:iatek.bluetooth] set proc[7216] name: ->[BtFtpServiceThr]
<7>[ 8325.939994] (0)[7215:Thread-473] exit
<3>[ 8326.018605] (1)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, rtc clock exported
<3>[ 8326.118601] (1)[WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[ 8326.118676] (1)[WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<3>[ 8326.118908] (1)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[ 8326.118956] (1)[WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 8326.118998] (1)[WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 8326.119041] (1)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<4>[ 8326.121170] (0)mtk_get_bus_freq() return 260000
<3>[ 8326.121862] (1)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[ 8326.121907] (1)Flush type = 4 Rx Queue
<3>[ 8326.122376] (1)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[ 8326.122431] (1)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[ 8326.122475] (1)[STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[ 8326.122512] (1)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[ 8326.122552] (1)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<6>[ 8326.122606] (1)[STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[ 8326.122646] (1)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[ 8326.122690] (1)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[ 8326.122733] (1)[STP] mtk_wcn_stp_assert:[I] set f/w assert (0)
<3>[ 8326.128143] (0)[WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6620)
<3>[ 8326.133641] (0)[WMT-IC][I]mt6620_ver_check:MT6620: read hw_ver (hw version) (0x8a11)
<3>[ 8326.139120] (0)[WMT-IC][I]mt6620_ver_check:MT6620: read fw_ver (rom version) (0x8a10)
<3>[ 8326.139181] (0)[WMT-IC][I]mt6620_find_wmt_ic_info:found ic info(0x8a11) by full match! index:3
<3>[ 8326.139240] (0)[WMT-IC][I]mt6620_ver_check:MT6620: wmt ic info: MT6620.E4 (0x8a11, WMTHWVER:3, patch_ext:_e3)
<3>[ 8326.139293] (0)[WMT-CORE][I]wmt_core_hw_check:chip id(0x6620) ver_check ok
<3>[ 8326.150134] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[ 8326.150188] (0)[WMT-IC][I]mt6620_sw_init:WMT-CORE: change baudrate(4000000) ok
<3>[ 8326.152248] (0)[WMT-IC][I]mt6620_update_patch_name:full firmware patch name: /system/etc/firmware/mt6620_patch_e3_hdr.bin
<3>[ 8326.156432] (0)[WMT-IC][I]mt6620_patch_dwn:===========================================
<3>[ 8326.156489] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Built Time = 20120813155255
<3>[ 8326.156535] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[ 8326.156576] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[ 8326.156617] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Ph Ver = 0x0014
<3>[ 8326.156660] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Platform = 1222
<3>[ 8326.156701] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Content Size = 0xa22c
<3>[ 8326.158824] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Content CRC = 0x0389
<3>[ 8326.158871] (0)[WMT-IC][I]mt6620_patch_dwn:===========================================
<3>[ 8326.177961] (1)[WMT-CTRL][W]wmt_ctrl_rx:wmt_ctrl_rx be signaled, but no rx data(200)
<3>[ 8326.193229] (1)[WMT-CTRL][W]wmt_ctrl_rx:wmt_ctrl_rx be signaled, but no rx data(200)
<7>[ 8326.202287] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 9102230 > 8ms
<7>[ 8326.202537] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<3>[ 8326.213455] (1)[WMT-CTRL][W]wmt_ctrl_rx:wmt_ctrl_rx be signaled, but no rx data(200)
<7>[ 8326.219205] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 9979000 > 8ms
<7>[ 8326.219291] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<3>[ 8326.281561] (0)[WMT-CTRL][W]wmt_ctrl_rx:wmt_ctrl_rx be signaled, but no rx data(200)
<3>[ 8326.319120] (1)[WMT-DEV][E]wmt_dev_rx_timeout(720):gRxCount != 0 (1), reset it!
<3>[ 8326.319177] (1)[WMT-CTRL][W]wmt_ctrl_rx:wmt_ctrl_rx be signaled, but no rx data(200)
<4>[ 8326.345156] (0)[lcm_esd_check], vcom is 0,4c-----------------------------------------
<7>[ 8326.345486] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 26395077 > 8ms
<7>[ 8326.345579] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<3>[ 8326.355509] (0)[WMT-CTRL][W]wmt_ctrl_rx:wmt_ctrl_rx be signaled, but no rx data(200)
<7>[ 8326.373406] (0)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 17665384 > 8ms
<7>[ 8326.373494] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<3>[ 8326.429168] (0)[WMT-CTRL][W]wmt_ctrl_rx:wmt_ctrl_rx be signaled, but no rx data(200)
<3>[ 8326.443959] (0)[WMT-IC][I]mt6620_patch_dwn:wmt_core: patch dwn:0 frag(42, 516) ok
<3>[ 8326.444107] (0)[WMT-IC][I]mt6620_sw_init:Not to check the patch validity
<3>[ 8326.444683] (0)[WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf145f48)
<3>[ 8326.449888] (0)[WMT-IC][I]mt6620_sw_init:init_coex ok
<6>[ 8326.450533] (0)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[ 8326.450584] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[ 8326.450630] (0)[STP] mtk_wcn_stp_assert:[I] set f/w assert (0)
<3>[ 8326.450667] (0)[WMT-IC][I]mt6620_sw_init:enable host STP-UART-FULL mode
<3>[ 8326.472744] (0)[WMT-IC][I]mt6620_sw_init:set fm mode (2) ok
<6>[ 8326.472761] (0)[STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[ 8326.472815] (0)[STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[ 8326.472830] (0)mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[ 8326.472839] (0)board_sdio_ctrl force off before on
<6>[ 8326.472847] (0)mtk_wcn_cmb_sdio_off (3)
<6>[ 8326.473069] (0)mtk_wcn_cmb_sdio_on (3)
<3>[ 8326.473106] (0)msdc3 -> USR Resume <- msdc_pm() : L<1674> PID
<3>[ 8326.488732] (0)msdc3 -> ================ <- msdc_set_mclk() : L<944> PID
<3>[ 8326.488754] (0)msdc3 -> !!! Set<400KHz> Source<197000KHz> -> sclk<397KHz> DDR<0> mode<0> div<124> <- msdc_set_mclk() : L<946> PID
<3>[ 8326.488770] (0)msdc3 -> ================ <- msdc_set_mclk() : L<947> PID
<7>[ 8326.506767] (0)WQ_WARN: cpu:4, proc:kworker/u:2, dur: 16697462 > 8ms
<7>[ 8326.506798] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<3>[ 8326.514581] (0)msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1742> PID
<7>[ 8326.523707] (0)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 12325461 > 8ms
<7>[ 8326.523737] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<3>[ 8326.535805] (0)msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<4054> PID
<3>[ 8326.535859] (0)msdc3 -> ================ <- msdc_set_mclk() : L<944> PID
<3>[ 8326.535893] (0)msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<946> PID
<3>[ 8326.535923] (0)msdc3 -> ================ <- msdc_set_mclk() : L<947> PID
<6>[ 8326.537975] (0)mmc2: new high speed SDIO card at address 0001
<7>[ 8326.540925] (0)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 13313539 > 8ms
<7>[ 8326.540974] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<6>[ 8326.541951] (0)[WMT-DFT][I]hif_sdio_probe:start!
<6>[ 8326.541976] (0)[WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x20a) num(0x1)
<6>[ 8326.541998] (0)[WMT-DFT][I]hif_sdio_probe:card->info[0]: MediaTek MT6620 Wireless Combo Chip
<6>[ 8326.542019] (0)[WMT-DFT][I]hif_sdio_probe:card->info[1]:
<6>[ 8326.542035] (0)[WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[ 8326.542248] (0)[WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(524288)
<7>[ 8326.542295] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 67955154 > 8ms
<7>[ 8326.542325] (0)work: mmc_rescan+0x0/0x324
<7>[ 8326.557581] (0)WQ_WARN: cpu:4, proc:kworker/u:2, dur: 11075308 > 8ms
<7>[ 8326.557612] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 8326.574516] (0)WQ_WARN: cpu:4, proc:kworker/u:2, dur: 12272231 > 8ms
<7>[ 8326.574547] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 8326.591454] (0)WQ_WARN: cpu:4, proc:kworker/u:2, dur: 12235461 > 8ms
<7>[ 8326.591484] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 8326.608546] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 12405385 > 8ms
<7>[ 8326.608642] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 8326.625438] (0)WQ_WARN: cpu:4, proc:kworker/u:2, dur: 12044769 > 8ms
<7>[ 8326.625532] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<6>[ 8326.628538] (0)[WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[ 8326.628908] (1)[2:kthreadd] fork [7217:kthreadd]
<6>[ 8326.628999] (0)[WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<4>[ 8326.629885] (0)[RT_MONITOR]WARNNING [7217:ksdioirqd/mmc2] SET NOT ALLOW RT Prio [1] for proc [7217:ksdioirqd/mmc2]
<7>[ 8326.642380] (1)WQ_WARN: cpu:4, proc:kworker/u:2, dur: 10871384 > 8ms
<7>[ 8326.642480] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 8326.659319] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 12589615 > 8ms
<7>[ 8326.659416] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 8326.676248] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 11042461 > 8ms
<7>[ 8326.676345] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 8326.693208] (1)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 11706308 > 8ms
<7>[ 8326.693301] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 8326.726932] (1)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 12218000 > 8ms
<7>[ 8326.726963] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 8326.743867] (1)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 12194231 > 8ms
<7>[ 8326.743897] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 8326.760807] (1)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 13611692 > 8ms
<7>[ 8326.760838] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 8326.777732] (1)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 13610307 > 8ms
<7>[ 8326.777757] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 8327.038518] (0)WQ_WARN: cpu:0, proc:kworker/0:0, dur: 310005077 > 8ms
<7>[ 8327.038540] (0)work: thermal_zone_device_check+0x0/0x18
<7>[ 8327.048495] (1)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 13213770 > 8ms
<7>[ 8327.048523] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 8327.065443] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 8988385 > 8ms
<7>[ 8327.065473] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 8327.217732] (1)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 24391000 > 8ms
<7>[ 8327.217762] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 8327.744508] (1)[2:kthreadd] fork [7218:kthreadd]
<6>[ 8327.772822] (1)[WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(20a) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[ 8327.772875] (1)[WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[ 8327.772938] (1)[WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 coredump:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[ 8327.773066] (1)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<3>[ 8327.773158] (1)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<4>[ 8327.773192] (0)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<7>[ 8327.776727] (1)[7213:loadDriverThrea] exit
<7>[ 8327.801926] (1)[6173:kworker/u:0] fork [7219:kworker/u:0]
<7>[ 8327.801963] (0)[7219:kworker/u:0] fork [7220:kworker/u:0]
<7>[ 8327.802001] (1)[7220:kworker/u:0] exit
<7>[ 8327.802032] (1)[7220:kworker/u:0] sig 17 to [7219:kworker/u:0]
<7>[ 8327.802074] (1)[7219:kworker/u:0] exit
<6>[ 8327.808948] (0)[RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[ 8327.808991] (0)ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[ 8327.829080] (0)WQ_WARN: cpu:0, proc:kworker/0:0, dur: 19890154 > 8ms
<7>[ 8327.829247] (0)work: wlanSetMulticastListWorkQueue+0x0/0x1f4 [wlan]
<5>[ 8327.830214] (0)init: starting `wpa_supplicant`
<7>[ 8327.831800] (0)[1:init] fork [7221:init]
<7>[ 8327.835729] (0)[304:WifiStateMachin] fork [7222:WifiStateMachin]
<7>[ 8327.835776] (1)[7222:WifiStateMachin] set proc[7222] name: ->[WifiMonitor]
<7>[ 8327.840497] (1)[7221:init] set proc[7221] name: ->[logwrapper]
<7>[ 8327.844931] (1)[7221:logwrapper] fork [7223:logwrapper]
<7>[ 8327.860047] (1)[7223:logwrapper] set proc[7223] name: ->[wpa_supplicant]
<7>[ 8328.199102] (0)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 12439539 > 8ms
<7>[ 8328.199133] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 8328.216012] (0)WQ_WARN: cpu:4, proc:kworker/u:2, dur: 13599846 > 8ms
<7>[ 8328.216033] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 8328.239983] (1)[7199:com.specdevice] exit
<7>[ 8328.348690] (0)WQ_WARN: cpu:0, proc:kworker/0:0, dur: 310071846 > 8ms
<7>[ 8328.348756] (0)work: thermal_zone_device_check+0x0/0x18
<4>[ 8328.349141] (0)dbs_check_cpu: turn off CPU1
<4>[ 8328.368540] (0)hp_work_handler: cpu_down kick off
<4>[ 8328.368669] (0)[lcm_esd_check], vcom is 0,4c-----------------------------------------
<7>[ 8328.369239] (1)[2:kthreadd] fork [7224:kthreadd]
<7>[ 8328.369333] (1)[2:kthreadd] fork [7225:kthreadd]
<4>[ 8328.369555] (1)[Power/hotplug] platform_cpu_disable, cpu: 1
<4>[ 8328.369722] (1)[Power/hotplug] platform_cpu_die, cpu: 1
<5>[ 8328.369733] (0)CPU1: shutdown
<4>[ 8328.369740] (0)[Power/hotplug] platform_cpu_kill, cpu: 1
<4>[ 8328.369753] (1)[Power/hotplug] cpu_enter_lowpower
<7>[ 8328.372024] (0)[7195:ksoftirqd/1] exit
<4>[ 8328.372289] (0)[WDK]:start Stop CPU:1
<4>[ 8328.372300] (0)[WDK]cpu 1 plug off, wk_stop_kick_cpu
<7>[ 8328.372379] (0)[7193:migration/1] exit
<7>[ 8328.372461] (0)[7225:kworker/1:2] exit
<4>[ 8328.372486] (0)hp_work_handler: cpu_down completion
<7>[ 8328.476287] (0)WQ_WARN: cpu:0, proc:kworker/0:1, dur: 10112615 > 8ms
<7>[ 8328.476308] (0)work: hwmsen_work_func+0x0/0x47c
<7>[ 8328.485672] (0)[7197:kworker/1:1] exit
<7>[ 8328.485962] (0)[7194:kworker/1:0] exit
<7>[ 8328.486026] (0)[7224:workqueue_trust] exit
<7>[ 8328.586984] (0)[259:er.ServerThread] fork [7226:er.ServerThread]
<7>[ 8328.592686] (0)[7226:er.ServerThread] set proc[7226] name: ->[SyncHandler-0]
<0>[ 8328.771206] (0)[LED]button-backlight:0
<4>[ 8328.771252] (0)mt65xx_leds_set_cust: set brightness, name:button-backlight, mode:3, level:0
<0>[ 8328.771295] (0)[LED]PMIC#0:0
<7>[ 8328.866756] (0)[7210:AsyncTask #2] fork [7227:AsyncTask #2]
<4>[ 8328.867472] (0)[MDPK W]: MT6577_MDP_Flush(): FLUSH() by different process. owner:0, current = ( process, pid, tgid ) = ( AsyncTask #2, 7227, 7227 ) Rsc=0x00000000
<7>[ 8328.879836] (0)[7227:AsyncTask #2] set proc[7227] name: ->[dmesg]
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IMM76D
ro.build.display.id=SLPA.ICS
ro.build.version.incremental=vD5U-0
ro.custom.build.version=vD5U-0
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=Thu Oct 18 20:37:31 CST 2012
ro.build.date.utc=1350563851
ro.build.type=user
ro.build.user=zxliu
ro.build.host=aclgcl-ubnt243
ro.build.tags=release-keys
ro.product.model=ALCATEL ONE TOUCH 992D
ro.product.brand=TCT
ro.product.name=Martell_lite
ro.product.device=Martell_lite_GSM
ro.product.board=Martell_lite
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=TCT
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=Martell_lite_GSM
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=Martell_lite-user 4.0.4 IMM76D vD5U-0 release-keys
ro.build.fingerprint=TCT/Martell_lite/Martell_lite_GSM:4.0.4/IMM76D/vD5U-0:user/release-keys
ro.build.flavor=
ro.build.characteristics=default
# end build properties
ro.product.display.model=ALCATEL ONE TOUCH 992D
#
#jrd sys properties
#
A51.supported.for.perso=true
A52.supported.for.perso=false
A53.supported.for.perso=true
Modem.FD.supported.for.perso=true
Def.shuttersound.enable=false
AMRWB.GSM.supported.for.perso=false
AMRWB.UMTS.supported.for.perso=true
ro.config.switch_on=bootaudio.mp3
ro.config.switch_off=shutaudio.mp3
ro.config.key_switch_on_off=1
ro.def.screen.brightness=100
ro.def.screen.brightness.mode=manual
ro.def.software.version=010 01
ro.com.android.dataroaming=false
ro.com.android.dataroaming2=false
ro.def.auto-rotation=true
qemu.hw.mainkeys=1
ro.config.alarm_alert=Sober.ogg
ro.com.google.clientidbase=android-alcatel
ro.com.google.clientidbase.am=android-alcatel
ro.com.google.clientidbase.ms=android-alcatel
ro.com.google.clientidbase.gmm=android-alcatel
ro.com.google.clientidbase.yt=android-alcatel
ro.setupwizard.mode=DISABLED
Def.PhoneVibrator.enable=true
gsm.version.baseband=6180
persist.adb.notify=1
persist.service.adb.enable=1
ro.power.key.default.behavior=1
ro_config_phnum_significant_len=7
ro.mobile_data_enable=1
def_show_on_map_hide=0
def.dualmic.display.enabled=false
def.dualmic.enabled=false
ro.music.lyrics.enable=1
ro.bluetooth.default.name=
ro.srs.audio.effect.enable=true
ro.update.cfi.for.all=false
ro.audio.parameters.config=0
ro.ringer_volume_general=5
ro.ringer_volume_meeting=1
ro.ringer_volume_outdoor=7
ro.notification_volume_general=5
ro.notification_volume_meeting=1
ro.notification_volume_outdoor=7
ro.alarm_volume_general=5
ro.alarm_volume_meeting=1
ro.alarm_volume_outdoor=7
ro.vibration_general=true
ro.vibration_silent=true
ro.vibration_meeting=true
ro.vibration_outdoor=true
ro.screen_touch_tone_general=true
ro.screen_touch_tone_meeting=false
ro.screen_touch_tone_outdoor=true
ro.sound_effect_general=true
ro.sound_effect_meeting=false
ro.sound_effect_outdoor=true
ro.haptic_feedback_general=true
ro.haptic_feedback_silent=false
ro.haptic_feedback_meeting=false
ro.haptic_feedback_outdoor=true
ro.lock_screen_general=true
ro.lock_screen_meeting=false
ro.lock_screen_outdoor=true
ro.product.locale.language=ru
ro.product.locale.region=RU
persist.sys.sd.defaultpath=/mnt/sdcard
ro.def.software.svn=01001
ro.config.message_ringtone=Wood.ogg
ro.sendemptysms.enable=false
Modem.Manufacture.for.perso=ALCATEL
Modem.Model.for.perso=ONE TOUCH 992D
ro.drm.enable=true
ro.oma.cp.authen_mandatory=true
ro.operator.name=
persist.sys.timezone=Europe/Moscow
def_search_engine=google
def_search_website=http://www.baidu.com/s?wd=
ecc_list_for_peso=
ro_default_emergency_number=
# begin mediatek build properties
ro.mediatek.version.release=ALPS.ICS2.6577.SP.V1.20120605
ro.mediatek.platform=MT6577
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.ICS2.6577.SP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=128m
# Encrypt phone function
ro.crypto.tmpfs_options=mode=0771,uid=1000,gid=1000
ro.crypto.fs_type=ext4
ro.crypto.fs_real_blkdev=/emmc@usrdata
ro.crypto.fs_mnt_point=/data
ro.crypto.fs_options=noauto_da_alloc
ro.crypto.fs_flags=0x00000406
# USB MTP WHQL
ro.sys.usb.mtp.whql.enable=0
# Power off opt in IPO
sys.ipo.pwrdncap=2
ro.sys.usb.storage.type=mtp,mass_storage
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.sf.hwrotation=0
ril.current.share_modem=2
launcherplus.allappsgrid=2d
launcher2.allappsgrid=3d_20
curlockscreen=2
ro.mediatek.gemini_support=true
persist.radio.fd.counter=20
persist.radio.fd.off.counter=20
drm.service.enabled=true
fmradio.driver.enable=1
dalvik.vm.mtk-stack-trace-file=/data/anr/mtk_traces.txt
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.config.ringtone=Backroad.ogg
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
wlan 286092 0 - Live 0xbf200000 (P)
cfg80211 121452 0 - Live 0xbf1d7000
mtk_fm_priv 8917 0 - Live 0xbf1d1000 (P)
mt6620_fm_drv 112373 1 mtk_fm_priv, Live 0xbf1a9000
mtk_stp_bt 39862 0 - Live 0xbf19c000
mtk_stp_gps 37318 0 - Live 0xbf18f000
mtk_stp_uart 21601 0 - Live 0xbf186000 (P)
mtk_stp_wmt 375916 7 wlan,mtk_fm_priv,mt6620_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf11c000 (P)
mtk_hif_sdio 18777 2 wlan,mtk_stp_wmt, Live 0xbf113000
devinfo 840 0 - Live 0xbf10f000 (P)
devapc 4557 0 - Live 0xbf10a000 (P)
sec 90381 0 - Live 0xbf0ed000 (P)
vcodec_kernel_driver 28294 0 - Live 0xbf0e1000 (P)
m4u 112266 8 - Live 0xbf0bc000 (P)
ccmni 17062 0 - Live 0xbf0b3000 (P)
ccci 116968 15 ccmni, Live 0xbf08b000 (P)
ccci_plat 126142 2 ccmni,ccci, Live 0xbf063000 (P)
mtk_drvb_77 6085 0 - Live 0xbf05e000 (P)
mtklfb 23534 0 - Live 0xbf054000
pvrsrvkm 233183 99 mtklfb, Live 0xbf00d000
mtk_hwe 1286 0 - Live 0xbf009000 (P)
aed 16252 3 - Live 0xbf000000 (P)
RAM: 512 MB (486 MB available)
System RAM: 486.000MB
mtkfb.0: 4.000MB
Flash: 4 GB (3.566 GB actual); 4 GB (3.693 GB actual)
mmcblk0: 3.566 GB
mmcblk1: 3.693 GB
触摸屏为 TCT ALCATEL ONE TOUCH 992D
$3 Two Flutes Woodworking Gang Drill Bits Blind Hole TCT Drilling Head 70mm 57mm for Multi Rows Boring Locator Machine 10mm 1PCS
$195.74 5PCS Good Quality Carbide TCT Dowel Drill Bits CNC Router Tools For Woodworking Machinery Total Length 70mm
$5.66 TCT Through Hole Drill Bit Woodworking Drilling Bit CNC Router 3mm 4mm Hole Making Boring 70mm Length Shank 10mm
$3.57 1 pc 5A Carbide Tip TCT Drill Bit Hole Saw 12-150mm Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$3.71 12-300mm TCT Hole Saw Tungsten Carbide Tipped Core Drill Bit Cobalt Cutter Tools For Stainless Steel Plate Iron Metal PVC Opener
$3.32 1pc 12-160mm TCT Carbide Hole Saw Drill Bit Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$9.16 60 90 Degree Countersink Drill with Brazing Carbide TCT straight handle Chamfering Milling Tool YG8Welded tungsten steel chamfer
$3.13 1 pc 5A Carbide Tip TCT Drill Bit Hole Saw 12-150mm Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$2.18 XCAN Drill Bit TCT/HSS Annular Cutter Pilot Pin 6.35mm 8mm Shank 77/90/102/127/160mm Long Pilot Pin Steel Plate Drill Tool
$29 1Pc 15-100mm TCT Hole Saw Carbide Tip Core Drill Bit Cutter Drilling crown for metal Stainless Steel Alloy
$36.8 12-100mm TCT Hole Saw Tungsten Carbide Tipped Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$34.67 BAILEY 1PC TCT Dowel Drill Bits Woodworking Drilling Bit CNC Router Bit 5-8mm Hole Making Boring 70/57mm Length Hard Metal Drill
$3.86 Free Shipping 2PCS 3-10 Diameter 85-110mm Length TCT Tip SDS Plus Round Shank 4 Hollow Hammer Drill Bits For Home Masonry Work
$28.49 XCAN Drill Bit Carbide Cutter 12mm 32mm Diameter 35mm Length Weldon Shank TCT Hollow Drill Annular Cutter for Metal Drilling
$119.56 5PCS High Quality 57/70mm Wood Carbide Crown TCT Brad-point Dowel Drill Bits CNC Router For Woodworking Tools Machinery
$4.37 TCT Annular Cutter Pilot Pin Center Rod Hollow Drill Steel Plate Drill HSS Annular Cutter Center Positioning Rod Ejector Pin
$39.14 BAILEY 1PC 70mm TCT Through Hole Drill Bits Woodworking Tool CNC Router Hole Making Boring Drill Head Power Tools Accessories
$6.14 12.7mm 3 Flutes TCT Trimming Straight Bit Milling Cutter For MDF Plywood Chipboard Hard Wood Drill Engraving Router Bit Endmill
$154.58 XCAN TCT Hollow Drill Bit TiCN Coating 12-32mm Weldon Shank Carbide Annular Cutter Hole Saw Cutter Metal Hole Drill Bit
$2.44 1/4" Shank TCT Straight End Mill Router Bits 1.6mm-6mm Woodworking Carving 2 Flute Milling Cutter Wood Engraving Carbide CNC Bit
新电池 TCT ALCATEL ONE TOUCH 992D
$195.74 5PCS Good Quality Carbide TCT Dowel Drill Bits CNC Router Tools For Woodworking Machinery Total Length 70mm
$5.66 TCT Through Hole Drill Bit Woodworking Drilling Bit CNC Router 3mm 4mm Hole Making Boring 70mm Length Shank 10mm
$3 Two Flutes Woodworking Gang Drill Bits Blind Hole TCT Drilling Head 70mm 57mm for Multi Rows Boring Locator Machine 10mm 1PCS
$3.57 1 pc 5A Carbide Tip TCT Drill Bit Hole Saw 12-150mm Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$9.16 60 90 Degree Countersink Drill with Brazing Carbide TCT straight handle Chamfering Milling Tool YG8Welded tungsten steel chamfer
$3.71 12-300mm TCT Hole Saw Tungsten Carbide Tipped Core Drill Bit Cobalt Cutter Tools For Stainless Steel Plate Iron Metal PVC Opener
$3.32 1pc 12-160mm TCT Carbide Hole Saw Drill Bit Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$29 1Pc 15-100mm TCT Hole Saw Carbide Tip Core Drill Bit Cutter Drilling crown for metal Stainless Steel Alloy
$3.13 1 pc 5A Carbide Tip TCT Drill Bit Hole Saw 12-150mm Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$2.18 XCAN Drill Bit TCT/HSS Annular Cutter Pilot Pin 6.35mm 8mm Shank 77/90/102/127/160mm Long Pilot Pin Steel Plate Drill Tool
$34.67 BAILEY 1PC TCT Dowel Drill Bits Woodworking Drilling Bit CNC Router Bit 5-8mm Hole Making Boring 70/57mm Length Hard Metal Drill
$36.8 12-100mm TCT Hole Saw Tungsten Carbide Tipped Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$3.86 Free Shipping 2PCS 3-10 Diameter 85-110mm Length TCT Tip SDS Plus Round Shank 4 Hollow Hammer Drill Bits For Home Masonry Work
$2.44 1/4" Shank TCT Straight End Mill Router Bits 1.6mm-6mm Woodworking Carving 2 Flute Milling Cutter Wood Engraving Carbide CNC Bit
$28.49 XCAN Drill Bit Carbide Cutter 12mm 32mm Diameter 35mm Length Weldon Shank TCT Hollow Drill Annular Cutter for Metal Drilling
$6.14 12.7mm 3 Flutes TCT Trimming Straight Bit Milling Cutter For MDF Plywood Chipboard Hard Wood Drill Engraving Router Bit Endmill
$39.14 BAILEY 1PC 70mm TCT Through Hole Drill Bits Woodworking Tool CNC Router Hole Making Boring Drill Head Power Tools Accessories
$119.56 5PCS High Quality 57/70mm Wood Carbide Crown TCT Brad-point Dowel Drill Bits CNC Router For Woodworking Tools Machinery
$154.58 XCAN TCT Hollow Drill Bit TiCN Coating 12-32mm Weldon Shank Carbide Annular Cutter Hole Saw Cutter Metal Hole Drill Bit
$4.37 TCT Annular Cutter Pilot Pin Center Rod Hollow Drill Steel Plate Drill HSS Annular Cutter Center Positioning Rod Ejector Pin
占地面积 TCT ALCATEL ONE TOUCH 992D
$5.66 TCT Through Hole Drill Bit Woodworking Drilling Bit CNC Router 3mm 4mm Hole Making Boring 70mm Length Shank 10mm
$195.74 5PCS Good Quality Carbide TCT Dowel Drill Bits CNC Router Tools For Woodworking Machinery Total Length 70mm
$3 Two Flutes Woodworking Gang Drill Bits Blind Hole TCT Drilling Head 70mm 57mm for Multi Rows Boring Locator Machine 10mm 1PCS
$3.57 1 pc 5A Carbide Tip TCT Drill Bit Hole Saw 12-150mm Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$3.71 12-300mm TCT Hole Saw Tungsten Carbide Tipped Core Drill Bit Cobalt Cutter Tools For Stainless Steel Plate Iron Metal PVC Opener
$3.32 1pc 12-160mm TCT Carbide Hole Saw Drill Bit Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$9.16 60 90 Degree Countersink Drill with Brazing Carbide TCT straight handle Chamfering Milling Tool YG8Welded tungsten steel chamfer
$3.13 1 pc 5A Carbide Tip TCT Drill Bit Hole Saw 12-150mm Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$2.18 XCAN Drill Bit TCT/HSS Annular Cutter Pilot Pin 6.35mm 8mm Shank 77/90/102/127/160mm Long Pilot Pin Steel Plate Drill Tool
$29 1Pc 15-100mm TCT Hole Saw Carbide Tip Core Drill Bit Cutter Drilling crown for metal Stainless Steel Alloy
$34.67 BAILEY 1PC TCT Dowel Drill Bits Woodworking Drilling Bit CNC Router Bit 5-8mm Hole Making Boring 70/57mm Length Hard Metal Drill
$36.8 12-100mm TCT Hole Saw Tungsten Carbide Tipped Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$3.86 Free Shipping 2PCS 3-10 Diameter 85-110mm Length TCT Tip SDS Plus Round Shank 4 Hollow Hammer Drill Bits For Home Masonry Work
$39.14 BAILEY 1PC 70mm TCT Through Hole Drill Bits Woodworking Tool CNC Router Hole Making Boring Drill Head Power Tools Accessories
$28.49 XCAN Drill Bit Carbide Cutter 12mm 32mm Diameter 35mm Length Weldon Shank TCT Hollow Drill Annular Cutter for Metal Drilling
$6.14 12.7mm 3 Flutes TCT Trimming Straight Bit Milling Cutter For MDF Plywood Chipboard Hard Wood Drill Engraving Router Bit Endmill
$4.37 TCT Annular Cutter Pilot Pin Center Rod Hollow Drill Steel Plate Drill HSS Annular Cutter Center Positioning Rod Ejector Pin
$2.44 1/4" Shank TCT Straight End Mill Router Bits 1.6mm-6mm Woodworking Carving 2 Flute Milling Cutter Wood Engraving Carbide CNC Bit
$119.56 5PCS High Quality 57/70mm Wood Carbide Crown TCT Brad-point Dowel Drill Bits CNC Router For Woodworking Tools Machinery
$154.58 XCAN TCT Hollow Drill Bit TiCN Coating 12-32mm Weldon Shank Carbide Annular Cutter Hole Saw Cutter Metal Hole Drill Bit
Find Similar devices | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |