1. Установить SpecDevice
2. Запустить, сформируется спецификация
3. Скопировать ссылку (подробнее...)
Основные характеристики | |
---|---|
Производитель | alps |
Модель | Q1 |
Версия Andriod | 4.1.2; eng.iverson.1359081718; SDK15 |
Процессор | 4 cores; ARMv7 Processor rev 0 (v7l); Max: 1700,0 MHz; Min: 384,0 MHz |
Дисплей | 800 x 480; DPI: 240; Evaluated Size: 3,9" |
Сенсорный экран | Multitouch 5 points |
Графический ускоритель | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.8@905891 |
ОЗУ | 512 MB (496 MB available) |
Память | 4 GB (3.589 GB actual); 16 GB (14.801 GB actual) (см. вкладку "Память") |
Связь | |
Телефон | GSM, Dual SIM; Net: EDGE |
WiFi | wlan_mt6628; IEEE 802.11 b/g/n; MediaTek MT6628; AP Mode |
USB Host | No |
Bluetooth | Bluetooth 3.0+HS, 4.0 |
GPS | Yes |
Установленные компоненты | |
Главная камера | Photo: 4.9 MP; Max: 2560x1920; Focus: infinity; Flash modes: on off torch |
Доп. камера | Photo: 1.9 MP; Max size: 1600x1200; Focus: infinity; No flash |
Датчики | bma222 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; |
Вибратор | Yes |
Языки | 43; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
Аккумулятор | Technology: Li-ion; Voltage: 3612 |
FM radio | Supported by chipset |
Owner's comment: | la-q1 |
SD Version: | 1.1 5 |
KERNEL: Linux version 3.0.13 (user@linux-user) (gcc version 4.4.3 (GCC) ) #2 SMP PREEMPT Fri Jan 25 10:41:45 CST 2013
CODENAME: REL
Mainboard: vigor17_ics2
BRAND: Q1
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: Q1
DISPLAY: Q1 MT6589 20130125-104408
FINGERPRINT: alps/vigor17_ics2/vigor17_ics2:4.0.4/IMM76D/1359081718:user/test-keys
HARDWARE: mt6577
ID: IMM76D
TAGS: test-keys
Processor : ARMv7 Processor rev 0 (v7l)
processor : 0
BogoMIPS : 1993.93
processor : 1
BogoMIPS : 2000.48
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc09
CPU revision : 0
Hardware : MT6589
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<5>[10568.655338] (1)[Power/Alarm] alarm 2 set 45793.108000000
<7>[10568.706989] (0)[18017:dmesg] exit
<7>[10568.707519] (0)[18017:dmesg] sig 17 to [18012:AsyncTask #2]
<7>[10568.721761] (1)[310:WifiStateMachin] fork [18023:WifiStateMachin]
<7>[10568.722097] (0)[18023:WifiStateMachin] set proc[18023] name: ->[loadDriverThrea]
<6>[10568.737009] (0)[WLAN] rfkill_set_block(blocked 0)
<6>[10568.737022] (0)[WLAN] Power on
<3>[10568.737040] (0)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[10568.737064] (0)[STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[10568.737117] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[10568.737133] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(not defined)
<3>[10568.737144] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO126)
<3>[10568.737153] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(not defined)
<3>[10568.737164] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[10568.737174] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO68)
<3>[10568.737184] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(11)
<3>[10568.737194] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO66)
<3>[10568.737204] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(10)
<3>[10568.737214] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<3>[10568.737224] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[10568.737234] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[10568.737244] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[10568.737254] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[10568.737263] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[10568.737273] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_CK(GPIO56)
<3>[10568.737283] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_WS(GPIO57)
<3>[10568.737293] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_DAT(GPIO58)
<3>[10568.737303] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(not defined)
<3>[10568.737313] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(not defined)
<3>[10568.737323] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[10568.737336] (1)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<3>[10568.737348] (1)[WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:ALL EINT not defined
<3>[10568.737359] (1)[WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[10568.737376] (1)[WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[10568.737387] (1)[WMT-PLAT][W]wmt_plat_gps_lna_ctrl:host gps lna pin not defined!!!
<3>[10568.737398] (1)[WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<7>[10568.750688] (1)[268:er.ServerThread] fork [18024:er.ServerThread]
<7>[10568.751075] (1)[18024:er.ServerThread] set proc[18024] name: ->[Thread-1019]
<7>[10568.752991] (1)[18024:Thread-1019] exit
<7>[10568.842224] (1)[18004:Thread-1219] exit
<7>[10568.856845] (1)[18009:Thread-1221] exit
<3>[10568.946294] (1)[WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[10568.946365] (1)[WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<3>[10568.946579] (1)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[10568.946627] (1)[WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[10568.946671] (1)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<4>[10568.947210] (1)mtk_get_bus_freq() return 260000
<3>[10568.947639] (1)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[10568.947681] (1)Flush type = 4 Rx Queue
<3>[10568.948128] (1)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[10568.948183] (1)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[10568.948228] (1)[STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[10568.948263] (1)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[10568.948302] (1)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<6>[10568.948354] (1)[STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[10568.948395] (1)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[10568.948438] (1)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[10568.948481] (1)[STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[10568.954265] (0)[WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6628)
<3>[10568.960035] (0)[WMT-IC][I]mt6628_ver_check:MT6628: read hw_ver (hw version) (0x8a10)
<3>[10568.965793] (0)[WMT-IC][I]mt6628_ver_check:MT6628: read fw_ver (rom version) (0x8a10)
<3>[10568.965847] (0)[WMT-IC][I]mt6628_find_wmt_ic_info:found ic info(0x8a10) by full match! index:1
<3>[10568.965904] (0)[WMT-IC][I]mt6628_ver_check:MT6628: wmt ic info: MT6628.E2 (0x8a10, WMTHWVER:1, patch_ext:_e2)
<3>[10568.965955] (0)[WMT-CORE][I]wmt_core_hw_check:chip id(0x6628) ver_check ok
<3>[10568.979369] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[10568.979425] (0)[WMT-IC][I]mt6628_sw_init:WMT-CORE: change baudrate(4000000) ok
<3>[10568.985979] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(srh_patch) result(0)
<3>[10568.986036] (0)[WMT-IC][I]mt6628_patch_dwn:valid patch found: (/system/etc/firmware//mt6628_patch_e2_hdr.bin)
<3>[10568.987202] (0)[WMT-IC][I]mt6628_patch_dwn:===========================================
<3>[10568.987256] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Built Time = 20120913160625a
<3>[10568.987302] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[10568.987343] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[10568.987383] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Ph Ver = 0x0010
<3>[10568.987425] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Platform = 1226
<3>[10568.987463] (0)[WMT-IC][I]mt6628_patch_dwn:===========================================
<3>[10569.022379] (0)[WMT-DEV][E]wmt_dev_rx_timeout(694):gRxCount != 0 (1), reset it!
<3>[10569.027105] (0)[WMT-DEV][E]wmt_dev_rx_timeout(694):gRxCount != 0 (-1), reset it!
<3>[10569.027119] (0)[WMT-CTRL][W]wmt_ctrl_rx:wmt_ctrl_rx be signaled, but no rx data(200)
<3>[10569.123814] (0)[WMT-IC][I]mt6628_patch_dwn:wmt_core: patch dwn:0 frag(22, 796) ok
<3>[10569.124541] (0)[WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf147448)
<3>[10569.125965] (0)[WMT-IC][I]mt6628_sw_init:init_coex ok
<6>[10569.133451] (0)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[10569.133471] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[10569.133489] (0)[STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[10569.133504] (0)[WMT-IC][I]mt6628_sw_init:enable host STP-UART-FULL mode
<3>[10569.148559] (1)[WMT-IC][I]mt6628_sw_init:co-clock disabled.
<3>[10569.149628] (1)[WMT-IC][I]mt6628_sw_init:set fm mode (2) ok
<3>[10569.149640] (1)[WMT-IC][I]mt6628_sw_init:disable mt662x firmware coredump
<6>[10569.149655] (1)[STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[10569.149669] (1)[STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[10569.149683] (1)mt_combo_sdio_ctrl: force set sdio port to (2)
<6>[10569.149691] (1)board_sdio_ctrl force off before on
<6>[10569.149698] (1)mtk_wcn_cmb_sdio_off (2)
<5>[10569.149820] (1)[Power/clkmgr] [freq_meter] data = 15494, freq = 196 MHz
<5>[10569.149920] (1)[Power/clkmgr] [freq_meter] data = 15494, freq = 196 MHz
<6>[10569.149939] (1)mtk_wcn_cmb_sdio_on (2)
<5>[10569.150048] (1)[Power/clkmgr] [freq_meter] data = 15494, freq = 196 MHz
<3>[10569.150066] (1)msdc2 -> USR Resume <- msdc_pm() : L<1716> PID
<3>[10569.166368] (0)msdc2 -> ================ <- msdc_set_mclk() : L<976> PID
<3>[10569.166388] (0)msdc2 -> !!! Set<400KHz> Source<197000KHz> -> sclk<397KHz> DDR<0> mode<0> div<124> <- msdc_set_mclk() : L<978> PID
<3>[10569.166404] (0)msdc2 -> ================ <- msdc_set_mclk() : L<979> PID
<3>[10569.191719] (0)msdc2 -> select card<0x00010000> <- msdc_command_start() : L<1786> PID
<3>[10569.205049] (0)msdc2 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<4117> PID
<3>[10569.205085] (0)msdc2 -> ================ <- msdc_set_mclk() : L<976> PID
<3>[10569.205102] (0)msdc2 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<978> PID
<3>[10569.205117] (0)msdc2 -> ================ <- msdc_set_mclk() : L<979> PID
<6>[10569.206114] (0)mmc2: new high speed SDIO card at address 0001
<6>[10569.208161] (0)[WMT-DFT][I]hif_sdio_probe:start!
<6>[10569.208176] (0)[WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x6628) num(0x1)
<6>[10569.208186] (0)[WMT-DFT][I]hif_sdio_probe:card->info[0]: 6628
<6>[10569.208195] (0)[WMT-DFT][I]hif_sdio_probe:card->info[1]: Combo
<6>[10569.208203] (0)[WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[10569.208212] (0)[WMT-DFT][I]hif_sdio_probe:card->info[3]:
<6>[10569.208323] (0)[WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(524288)
<7>[10569.208358] (0)WQ_WARN: cpu:4, proc:kworker/u:0, [mmc_rescan+0x0/0x324]dur: 56857847 > 15ms
<6>[10569.306390] (1)[WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[10569.306708] (1)[2:kthreadd] fork [18025:kthreadd]
<6>[10569.306812] (1)[WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<4>[10569.306872] (0)[RT_MONITOR]WARNNING [18025:ksdioirqd/mmc2] SET NOT ALLOW RT Prio [1] for proc [18025:ksdioirqd/mmc2]
<5>[10569.306911] (1)[wlan] net_device prDev(0xdc67b000) allocated
<5>[10569.310298] (1)[wlan] Open FW image: WIFI_RAM_CODE done
<5>[10569.318858] (1)[wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[10569.319098] (1)[wlan] Virtual Address = df6bc000 for COMMON MGMT MEMORY POOL.
<5>[10569.319156] (1)[wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[10569.319231] (1)[wlan] Virtual Address = df6be000 for SW_RFB_T.
<5>[10569.319282] (1)[wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[10569.319354] (1)[wlan] Virtual Address = df6c2000 for MSDU_INFO_T.
<6>[10569.319409] (1)[wlan] wlanAdapterStart(): Acquiring LP-OWN
<6>[10569.336429] (1)[wlan] Chip ID: 0x6628
<6>[10569.336476] (1)[wlan] Revision ID: 0x0
<5>[10569.647109] (0)[Power/Battery] [use_chip_trim_value] 3 -> 3
<5>[10569.647129] (0)[Power/Battery] [FG] -3
<5>[10569.647141] (0)[Power/Battery] [FG] gFG_current_inout_battery : -3
<7>[10569.647615] (0)WQ_WARN: cpu:0, proc:kworker/0:2, [thermal_zone_device_check+0x0/0x18]dur: 311233923 > 15ms
<4>[10569.936222] (0)[cpu-0:thread:60] 2013-07-13 14:53:01.905016 UTC; android time 2013-07-13 21:53:01.905016
<4>[10569.936237] (0)[WDK], local_bit:0x0, cpu:0
<4>[10569.936245] (0)[WDK]: kick External WDT
<4>[10569.936255] (0)[WDK], local_bit:0x1, cpu:0, check bit0x:3
<4>[10569.936264] (0)[WDK]: cpu:0, kick local wdt
<4>[10569.936278] (0)WDT mpcore_wdt_keepalive:cpu-0: count:325000000. prescale:0, mpcore_margin:25,TWD_WDOG_LOAD:135f1b41
<4>[10569.936292] (0)WDT mpcore_wdt_start:cpu-0,control: 0x7, count:0x135f1b3d, load:0x135f1b41
<4>[10569.946239] (1)[cpu-0:thread:61] 2013-07-13 14:53:01.915036 UTC; android time 2013-07-13 21:53:01.915036
<4>[10569.946254] (1)[WDK], local_bit:0x1, cpu:1
<4>[10569.946261] (1)[WDK]: kick External WDT
<4>[10569.946271] (1)[WDK], local_bit:0x3, cpu:1, check bit0x:3
<4>[10569.946280] (1)[WDK]: cpu:1, kick local wdt
<4>[10569.946294] (1)WDT mpcore_wdt_keepalive:cpu-1: count:325000000. prescale:0, mpcore_margin:25,TWD_WDOG_LOAD:135f1b40
<4>[10569.946308] (1)WDT mpcore_wdt_start:cpu-1,control: 0x7, count:0x135f1b3c, load:0x135f1b40
<6>[10570.074704] (0)[wlan] wlanAdapterStart(): Waiting for Ready bit..
<6>[10570.206386] (0)[wlan] Ready bit asserted
<5>[10570.230247] (0)[wlan] RF CAL FAIL = (0),BB CAL FAIL = (0)
<5>[10570.234515] (0)[wlan] [wifi] wlan%d netif_carrier_off
<6>[10570.234580] (0)[wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[10570.234698] (0)[wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[10570.235004] (0)[wlan] Domain: map=0, idx=1, code=0x0000
<7>[10570.236008] (1)[2:kthreadd] fork [18026:kthreadd]
<5>[10570.236100] (0)[wlan] tx_thread starts running...
<6>[10570.318920] (0)[WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(6628) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[10570.318972] (0)[WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[10570.319033] (0)[WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 coredump:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[10570.319154] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<3>[10570.319262] (0)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<4>[10570.319719] (0)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<7>[10570.322989] (1)[18023:loadDriverThrea] exit
<1>[10570.346257] (0)[FM_NTC | MAIN]timer --->lock, cnt=0, pid=0
<1>[10570.346342] (0)[FM_NTC | MAIN]timer <---unlock, cnt=1, pid=0
<1>[10570.346467] (0)[FM_NTC | MAIN]rds_data --->lock, cnt=0, pid=17382
<1>[10570.346510] (0)[FM_NTC | MAIN]rds_data <---unlock, cnt=1, pid=17382
<6>[10570.351384] (0)[RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[10570.351415] (0)ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[10570.366714] (1)WQ_WARN: cpu:1, proc:kworker/1:3, [wlanSetMulticastListWorkQueue+0x0/0x1f4 [wlan_mt6628]]dur: 16349231 > 15ms
<5>[10570.367341] (0)init: starting `wpa_supplicant`
<7>[10570.367580] (0)[1:init] fork [18027:init]
<7>[10570.369017] (1)[18027:init] set proc[18027] name: ->[logwrapper]
<7>[10570.369394] (0)[310:WifiStateMachin] fork [18028:WifiStateMachin]
<7>[10570.369448] (0)[18028:WifiStateMachin] set proc[18028] name: ->[WifiMonitor]
<7>[10570.371182] (1)[18027:logwrapper] fork [18029:logwrapper]
<7>[10570.376903] (1)[18029:logwrapper] set proc[18029] name: ->[wpa_supplicant]
<5>[10570.456523] (0)[wlan] N=0 closed
<5>[10570.456551] (0)[wlan] EVENT-ROAMING ABORT: Current Time = 8006180
<5>[10570.456567] (0)[wlan] [13] TRANSITION: [0] -> [0]
<6>[10570.457172] (0)[wlan] NAF=0,0,0
<6>[10570.457349] (0)[wlan] NAF=0,0,0
<5>[10570.672631] (1)[wlan] [13] TRANSITION: [0] -> [2]
<5>[10570.730548] (0)[Power/Alarm] alarm 0 set 1373727482.695000000
<5>[10570.732580] (0)[wlan] CMD set_band=0
<7>[10570.771555] (1)[18012:AsyncTask #2] fork [18030:AsyncTask #2]
<7>[10570.772502] (1)[17988:Binder Thread #] fork [18031:Binder Thread #]
<7>[10570.772589] (0)[18031:Binder Thread #] set proc[18031] name: ->[Binder Thread #]
<7>[10570.784758] (1)[18030:AsyncTask #2] set proc[18030] name: ->[dmesg]
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IMM76D
ro.build.display.id=Q1 MT6589 20130125-104408
ro.build.version.incremental=eng.iverson.1359081718
ro.custom.build.version=1359081718
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.1.2
ro.build.date=2013年 01月 25日 星期五 10:44:08 CST
ro.build.date.utc=1359081848
ro.build.type=user
ro.build.user=iverson
ro.build.host=user
ro.build.tags=test-keys
ro.product.model=Q1
ro.product.brand=Q1
ro.product.name=Q1
ro.product.device=Q1
ro.product.board=vigor17_ics2
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=alps
ro.product.locale.language=zh
ro.product.locale.region=CN
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=Q1
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=vigor17_ics2-user 4.0.4 IMM76D eng.iverson.1359081718 test-keys
ro.build.fingerprint=alps/vigor17_ics2/vigor17_ics2:4.0.4/IMM76D/1359081718:user/test-keys
ro.build.flavor=
ro.build.characteristics=default
persist.sys.timezone=Asia/Shanghai
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=ALPS.ICS2.MP.V1.20
ro.mediatek.platform=MT6577
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.ICS2.MP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=128m
# Encrypt phone function
ro.crypto.tmpfs_options=mode=0771,uid=1000,gid=1000
ro.crypto.fs_type=ext4
ro.crypto.fs_real_blkdev=/emmc@usrdata
ro.crypto.fs_mnt_point=/data
ro.crypto.fs_options=noauto_da_alloc
ro.crypto.fs_flags=0x00000406
# USB MTP WHQL
ro.sys.usb.mtp.whql.enable=0
# Power off opt in IPO
sys.ipo.pwrdncap=2
ro.sys.usb.storage.type=mtp,mass_storage
#
# ADDITIONAL_BUILD_PROPERTIES
#
fmradio.driver.chip=3
ril.external.md=1
ro.sf.hwrotation=180
ril.current.share_modem=2
launcherplus.allappsgrid=2d
launcher2.allappsgrid=3d_20
curlockscreen=2
ro.mediatek.gemini_support=true
drm.service.enabled=true
fmradio.driver.enable=1
mediatek.wlan.chip=MT6628
mediatek.wlan.module.postfix=_mt6628
dalvik.vm.mtk-stack-trace-file=/data/anr/mtk_traces.txt
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.config.ringtone=Backroad.ogg
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
wlan_mt6628 276890 0 - Live 0xbf1fb000 (P)
cfg80211 122096 0 - Live 0xbf1d2000
mtk_fm_priv 2855 0 - Live 0xbf1ce000 (P)
mtk_fm_drv 113233 1 mtk_fm_priv, Live 0xbf1aa000
mtk_stp_bt 39986 0 - Live 0xbf19d000
mtk_stp_gps 37294 0 - Live 0xbf190000
mtk_stp_uart 21589 1 - Live 0xbf187000 (P)
mtk_stp_wmt 375558 8 wlan_mt6628,mtk_fm_priv,mtk_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf11d000 (P)
mtk_hif_sdio 18482 2 wlan_mt6628,mtk_stp_wmt, Live 0xbf114000
devinfo 840 0 - Live 0xbf110000 (P)
devapc 4553 0 - Live 0xbf10b000 (P)
sec 90923 0 - Live 0xbf0ee000 (P)
vcodec_kernel_driver 42942 0 - Live 0xbf0de000 (P)
m4u 114013 26 - Live 0xbf0b9000 (P)
ccmni 17150 0 - Live 0xbf0b0000 (P)
ccci 117432 15 ccmni, Live 0xbf088000 (P)
ccci_plat 128201 2 ccmni,ccci, Live 0xbf05f000 (P)
mtk_drvb_77 6081 0 - Live 0xbf05a000 (P)
mtklfb 23578 0 - Live 0xbf050000
pvrsrvkm 233199 107 mtklfb, Live 0xbf009000
aed 16304 3 - Live 0xbf000000 (P)
RAM: 512 MB (496 MB available)
System RAM: 496.000MB
mtkfb.0: 6.000MB
Flash: 4 GB (3.589 GB actual); 16 GB (14.801 GB actual)
mmcblk0: 3.589 GB
mmcblk1: 14.801 GB
Тачскрин для alps Q1
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
Новый аккумулятор для alps Q1
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
Чехлы для alps Q1
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
Найти похожие устройства | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |