Spreadtrum R9 Specification

3 Steps to publish Your specification here:

1. Install SpecDevice
2. Run and decode your specs
3. Get your link (read more...)

General
OS details
CPU info
GPU extensions
WiFi kernel messages
build.prop
Modules
Memory map

General Specifications
Manufacturer	Spreadtrum
Model	R9
Firmware	4.0.3; eng.daiweiping.20170311.103920; SDK15
CPU	2 cores; ARMv7 Processor rev 1 (v7l) sc8825; Max: 1000,0 MHz; Min: 500,0 MHz
Display	854 x 480; DPI: 240; Evaluated Size: 4,1"
Touch screen	Multitouch 5 points
GPU	Mali-400 MP; ARM; OpenGL ES-CM 1.1 Spreadtrum Build; OpenGL ES 2.0 Spreadtrum Build
RAM	512 MB (476 MB available)
Flash	4 GB Build-in (3.648 GB actual)
Communications
Phone	GSM; Net: EDGE
WiFi	rda_wlan; IEEE 802.11 b/g; RDA Microelectronics
USB Host	No
Bluetooth	Bluetooth v2.1 + EDR
GPS	Yes
Advanced Features
Front camera	Photo: 5.0 MP; Max: 2592x1936; Video: 0.3 MP; Max: 720x480; Focus: auto auto-multi macro; Flash modes: off on torch
Back camera	Photo: 1.2 MP; Max size: 1280x960; Video: 0.1 MP; Max: 352x288; Focus: infinity; No flash
Sensors	ST MXC622X 3-axis Accelerometer (ST); range: 0...19,613; resolution: 0,01 (0,049%); power: 0,145mA;
	AL3006 Light sensor (LITEON); range: 0...1; resolution: 100000 (10000000%); power: 0,005mA;
	AL3006 Proximity sensor (LITEON); range: 0...1; resolution: 1 (100%); power: 0,005mA;
Vibrator	Yes
Supported languages	51; Arabic; Bulgarian; Bengali; Catalan; Cebuano; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hausa; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Burmese; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Swahili; Tamil; Telugu; Thai; Tagalog; Turkish; Uighur; Ukrainian; Urdu; Vietnamese; Chinese
Battery	Technology: Li-ion; Voltage: 4030
FM radio	Supported by chipset
Owner's comment:	помогите разобраться в марке и модели Spreadtrum R9
SD Version:	1.1 7

KERNEL: Linux version 3.0.8 (daiweiping@user) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Fri Mar 10 20:04:49 CST 2017
CODENAME: REL
Mainboard: sp6825c2_a10e_ts_ts1_fl
BRAND: R9
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: sp6825c2_a10e_ts_ts1_fl
DISPLAY: KW_6825C_A10E_V1.0_TS1_FL_V1.0_20170311
FINGERPRINT: unknown
HARDWARE: sc8825
ID: IML74K
TAGS: test-keys

Processor : ARMv7 Processor rev 1 (v7l)
processor : 0
BogoMIPS : 1024.00
processor : 1
BogoMIPS : 1024.00
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xc05
CPU revision : 1
Hardware : sc8825
Revision : 0000
Serial : 0000000000000000

GL_OES_texture_npot
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_standard_derivatives
GL_OES_EGL_image
GL_OES_depth24
GL_ARM_rgba8
GL_ARM_mali_shader_binary
GL_OES_depth_texture
GL_OES_packed_depth_stencil
GL_EXT_texture_format_BGRA8888
GL_EXT_blend_minmax
GL_OES_EGL_image_external
GL_OES_EGL_sync
GL_OES_rgb8_rgba8
GL_EXT_multisampled_render_to_texture
GL_EXT_discard_framebuffer
GL_OES_get_program_binary
GL_EXT_shader_texture_lod

<4>1[ 9821.131608] wlan_exit_module
<6>1[ 9821.636333] rda_5991e_wifi_power_off rda_5991_bt_force_swtrx succeed!!
<6>1[ 9821.638383] rda_5991e_wifi_power_off succeed!!
<6>1[ 9821.640595] rda_5991e_wifi_power_off write fix_agc_gain succeed!!
<6>1[ 9821.640608] rda_bt_pw_ioctl cmd=0x7511
<4>1[ 9821.682753] ****RDA WIFI OR BT POWER ON
<4>1[ 9821.682814] enter wlan_read_version_from_chip ,wlan_version=4,rda_wifi_rf_client is null or not :no
<4>1[ 9821.682889] wifi rf client addr=14
<4>1[ 9821.682923] already read chipid or rda_wifi_rf_client is null!
<6>1[ 9821.684447] rda_5991e_wifi_power_on bt_power_on=1
<6>1[ 9821.685763] rda_5991e_wifi_power_on write wf_en succeed!!
<6>1[ 9821.687072] rda_5991e_wifi_power_on write rda_5991_bt_no_force_swtrx succeed!!
<6>1[ 9821.701859] rda_5991e_wifi_power_on write control_mode_disable succeed!!
<6>1[ 9821.810992] rda_bt_pw_ioctl cmd=0x7510
<6>1[ 9821.823779]
<6>1[ 9821.823788] RDA5890 SDIO WIFI Driver for st_linux
<6>1[ 9821.823801] Ver: 0.3.1
<6>1[ 9821.823805]
<4>1[ 9821.823967] mmc2: !!!!! error in sending cmd:52, int:0x10000, err:-110
<7>1[ 9821.823981] sdhci: =========== REGISTER DUMP (mmc2)===========
<7>1[ 9821.823994] sdhci: 0x00000000 | 0x00017010 | 0x80022000 | 0x341a0013
<7>1[ 9821.824003]
<7>1[ 9821.824012] sdhci: 0x00001000 | 0x00000000 | 0x00000000 | 0x00000000
<7>1[ 9821.824021]
<7>1[ 9821.824030] sdhci: 0x1428ea4a | 0x01f00001 | 0x00000f02 | 0x000e0707
<7>1[ 9821.824039]
<7>1[ 9821.824048] sdhci: 0x00000000 | 0x00ef000b | 0x00ef000b | 0x00000000
<7>1[ 9821.824057]
<7>1[ 9821.824066] sdhci: 0x02e10080 | 0x00000000 | 0x00000000 | 0x00000000
<7>1[ 9821.824075]
<7>1[ 9821.824083] sdhci: 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000
<7>1[ 9821.824092]
<7>1[ 9821.824100] sdhci: 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000
<7>1[ 9821.824109]
<7>1[ 9821.824117] sdhci: 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000
<7>1[ 9821.824126]
<7>1[ 9821.824134] sdhci: 0x00000000 | 0x00000000 | 0x00000000
<7>1[ 9821.824141]
AHB_CTL0:0x1ae80040
<4>1[ 9821.824152] INTC0_EN:0x8e41c4d4
<4>1[ 9821.824160] INTC1_EN:0x2c4048
<4>1[ 9821.824168] GIC_INT0_EN:0x2000ffff
<4>1[ 9821.824176] GIC_INT1_EN:0x8e61c4d4
<4>1[ 9821.824184] GIC_INT2_EN:0x6244cd8
<4>1[ 9821.824192] INTCV1_IRQ_MSKSTS:0x0
<4>1[ 9821.824200] INTCV1_IRQ_RAW:0x0
<4>1[ 9821.824217] ANA_REG_GLB_LDO_PD_CTRL1:0xa1
<4>1[ 9821.824231] ANA_REG_GLB_LDO_VCTRL4:0x5990
<7>1[ 9821.824239] sdhci: ===========================================
<4>1[ 9821.824307] rda_wlan_sdio: probe of mmc2:83cd:1 failed with error -110
<4>1[ 9821.824766] sdhci_bus_scan, entry
<6>1[ 9821.824817] mmc2 mmc_rescan
<4>1[ 9821.824901] mmc2: !!!!! error in sending cmd:7, int:0x10000, err:-110
<7>1[ 9821.824914] sdhci: =========== REGISTER DUMP (mmc2)===========
<7>1[ 9821.824933] sdhci: 0x00000000 | 0x00017010 | 0x83cd0000 | 0x071a0013
<7>1[ 9821.824944]
<7>1[ 9821.824957] sdhci: 0x00001000 | 0x00000000 | 0x00000000 | 0x00000000
<7>1[ 9821.824966]
<7>1[ 9821.824982] sdhci: 0x1428ea4a | 0x01f00001 | 0x00000f02 | 0x000e0707
<7>1[ 9821.824991]
<7>1[ 9821.825001] sdhci: 0x00000000 | 0x00ef000b | 0x00ef000b | 0x00000000
<7>1[ 9821.825009]
<7>1[ 9821.825018] sdhci: 0x02e10080 | 0x00000000 | 0x00000000 | 0x00000000
<7>1[ 9821.825027]
<7>1[ 9821.825035] sdhci: 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000
<7>1[ 9821.825044]
<7>1[ 9821.825052] sdhci: 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000
<7>1[ 9821.825061]
<7>1[ 9821.825070] sdhci: 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000
<7>1[ 9821.825078]
<7>1[ 9821.825086] sdhci: 0x00000000 | 0x00000000 | 0x00000000
<7>1[ 9821.825094]
AHB_CTL0:0x1ae80040
<4>1[ 9821.825105] INTC0_EN:0x8e41c4d4
<4>1[ 9821.825113] INTC1_EN:0x2c4048
<4>1[ 9821.825121] GIC_INT0_EN:0x2000ffff
<4>1[ 9821.825129] GIC_INT1_EN:0x8e61c4d4
<4>1[ 9821.825137] GIC_INT2_EN:0x6244cd8
<4>1[ 9821.825145] INTCV1_IRQ_MSKSTS:0x0
<4>1[ 9821.825153] INTCV1_IRQ_RAW:0x0
<4>1[ 9821.825170] ANA_REG_GLB_LDO_PD_CTRL1:0xa1
<4>1[ 9821.825184] ANA_REG_GLB_LDO_VCTRL4:0x5990
<7>1[ 9821.825193] sdhci: ===========================================
<4>1[ 9821.825462] wlan_init_module 0
<4>1[ 9821.825488] mmc2: !!!!! error in sending cmd:7, int:0x10000, err:-110
<7>1[ 9821.825500] sdhci: =========== REGISTER DUMP (mmc2)===========
<7>1[ 9821.825514] sdhci: 0x00000000 | 0x00017010 | 0x83cd0000 | 0x071a0013
<7>1[ 9821.825522]
<7>1[ 9821.825531] sdhci: 0x00001000 | 0x00000000 | 0x00000000 | 0x00000000
<7>1[ 9821.825540]
<7>1[ 9821.825550] sdhci: 0x1428ea4a | 0x01f00001 | 0x00000f02 | 0x000e0707
<7>1[ 9821.825558]
<7>1[ 9821.825567] sdhci: 0x00000000 | 0x00ef000b | 0x00ef000b | 0x00000000
<7>1[ 9821.825576]
<7>1[ 9821.825585] sdhci: 0x02e10080 | 0x00000000 | 0x00000000 | 0x00000000
<7>1[ 9821.825594]
<7>1[ 9821.825602] sdhci: 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000
<7>1[ 9821.825611]
<7>1[ 9821.825619] sdhci: 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000
<7>1[ 9821.825628]
<7>1[ 9821.825636] sdhci: 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000
<7>1[ 9821.825645]
<7>1[ 9821.825653] sdhci: 0x00000000 | 0x00000000 | 0x00000000
<7>1[ 9821.825660]
AHB_CTL0:0x1ae80040
<4>1[ 9821.825671] INTC0_EN:0x8e41c4d4
<4>1[ 9821.825679] INTC1_EN:0x2c4048
<4>1[ 9821.825687] GIC_INT0_EN:0x2000ffff
<4>1[ 9821.825695] GIC_INT1_EN:0x8e61c4d4
<4>1[ 9821.825703] GIC_INT2_EN:0x6244cd8
<4>1[ 9821.825711] INTCV1_IRQ_MSKSTS:0x0
<4>1[ 9821.825719] INTCV1_IRQ_RAW:0x0
<4>1[ 9821.825734] ANA_REG_GLB_LDO_PD_CTRL1:0xa1
<4>1[ 9821.825749] ANA_REG_GLB_LDO_VCTRL4:0x5990
<7>1[ 9821.825757] sdhci: ===========================================
<4>1[ 9821.825840] mmc2: !!!!! error in sending cmd:7, int:0x10000, err:-110
<7>1[ 9821.825852] sdhci: =========== REGISTER DUMP (mmc2)===========
<7>1[ 9821.825866] sdhci: 0x00000000 | 0x00017010 | 0x83cd0000 | 0x071a0013
<7>1[ 9821.825875]
<7>1[ 9821.825884] sdhci: 0x00001000 | 0x00000000 | 0x00000000 | 0x00000000
<7>1[ 9821.825893]
<7>1[ 9821.825902] sdhci: 0x1428ea4a | 0x01f00001 | 0x00000f02 | 0x000e0707
<7>1[ 9821.825911]
<7>1[ 9821.825920] sdhci: 0x00000000 | 0x00ef000b | 0x00ef000b | 0x00000000
<7>1[ 9821.825929]
<7>1[ 9821.825938] sdhci: 0x02e10080 | 0x00000000 | 0x00000000 | 0x00000000
<7>1[ 9821.825947]
<7>1[ 9821.825955] sdhci: 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000
<7>1[ 9821.825964]
<7>1[ 9821.825972] sdhci: 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000
<7>1[ 9821.825981]
<7>1[ 9821.825989] sdhci: 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000
<7>1[ 9821.825998]
<7>1[ 9821.826006] sdhci: 0x00000000 | 0x00000000 | 0x00000000
<7>1[ 9821.826013]
AHB_CTL0:0x1ae80040
<4>1[ 9821.826024] INTC0_EN:0x8e41c4d4
<4>1[ 9821.826032] INTC1_EN:0x2c4048
<4>1[ 9821.826040] GIC_INT0_EN:0x2000ffff
<4>1[ 9821.826048] GIC_INT1_EN:0x8e61c4d4
<4>1[ 9821.826056] GIC_INT2_EN:0x6244cd8
<4>1[ 9821.826064] INTCV1_IRQ_MSKSTS:0x0
<4>1[ 9821.826072] INTCV1_IRQ_RAW:0x0
<4>1[ 9821.826086] ANA_REG_GLB_LDO_PD_CTRL1:0xa1
<4>1[ 9821.826100] ANA_REG_GLB_LDO_VCTRL4:0x5990
<7>1[ 9821.826109] sdhci: ===========================================
<4>1[ 9821.826183] mmc2: !!!!! error in sending cmd:7, int:0x10000, err:-110
<7>1[ 9821.826196] sdhci: =========== REGISTER DUMP (mmc2)===========
<7>1[ 9821.826210] sdhci: 0x00000000 | 0x00017010 | 0x83cd0000 | 0x071a0013
<7>1[ 9821.826219]
<7>1[ 9821.826227] sdhci: 0x00001000 | 0x00000000 | 0x00000000 | 0x00000000
<7>1[ 9821.826236]
<7>1[ 9821.826246] sdhci: 0x1428ea4a | 0x01f00001 | 0x00000f02 | 0x000e0707
<7>1[ 9821.826255]
<7>1[ 9821.826264] sdhci: 0x00000000 | 0x00ef000b | 0x00ef000b | 0x00000000
<7>1[ 9821.826272]
<7>1[ 9821.826281] sdhci: 0x02e10080 | 0x00000000 | 0x00000000 | 0x00000000
<7>1[ 9821.826290]
<7>1[ 9821.826298] sdhci: 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000
<7>1[ 9821.826307]
<7>1[ 9821.826315] sdhci: 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000
<7>1[ 9821.826324]
<7>1[ 9821.826333] sdhci: 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000
<7>1[ 9821.826341]
<7>1[ 9821.826349] sdhci: 0x00000000 | 0x00000000 | 0x00000000
<7>1[ 9821.826356]
AHB_CTL0:0x1ae80040
<4>1[ 9821.826367] INTC0_EN:0x8e41c4d4
<4>1[ 9821.826375] INTC1_EN:0x2c4048
<4>1[ 9821.826383] GIC_INT0_EN:0x2000ffff
<4>1[ 9821.826391] GIC_INT1_EN:0x8e61c4d4
<4>1[ 9821.826399] GIC_INT2_EN:0x6244cd8
<4>1[ 9821.826407] INTCV1_IRQ_MSKSTS:0x0
<4>1[ 9821.826415] INTCV1_IRQ_RAW:0x0
<4>1[ 9821.826429] ANA_REG_GLB_LDO_PD_CTRL1:0xa1
<4>1[ 9821.826444] ANA_REG_GLB_LDO_VCTRL4:0x5990
<7>1[ 9821.826452] sdhci: ===========================================
<4>1[ 9821.826491] _mmc_detect_card_removed ret=ffffff92
<6>1[ 9821.826752] mmc2: card 83cd removed
<4>1[ 9821.827184] ***sdhci_set_power: mmc2 always use 1.8V for sdio.
<4>1[ 9821.839803] sdhci_set_clock open
<4>1[ 9821.839846] ***sdhci_set_power: mmc2 always use 1.8V for sdio.
<4>1[ 9821.852265] mmc2, ****************** sdhci_hw_reset, call mmc_power_off ***********
<4>0[ 9821.861564] ****DDRDFS**** do_dbs_timer memfreq_bypass=0,mm_is_on()=0,memfreq_curr=400
<4>0[ 9821.861666] dbs_check_cpu: max_load:56, memfreq_curr:400
<4>0[ 9821.861720] ****DDRDFS**** memfreq_get_demand cpu_load=224, mem_load=0
<4>1[ 9822.031009] __clk_cpufreq_notifier (0) dump cpu freq (0 1000000 500000 1)
<4>1[ 9822.031028] __clk_cpufreq_notifier (0) dump cpu freq (1 1000000 500000 1)
<4>1[ 9822.033090] ****DVFS**** cpu_set_freq_vdd: cpu=1,old=1000000,new=500000
<4>1[ 9822.033123] __clk_cpufreq_notifier (1) dump cpu freq (0 1000000 500000 1)
<4>1[ 9822.033170] __clk_cpufreq_notifier (1) dump cpu freq (1 1000000 500000 1)
<4>1[ 9822.361060] mmc2, ****************** sdhci_hw_reset, call mmc_power_up ***********
<4>1[ 9822.361237] ***sdhci_set_power: mmc2 always use 1.8V for sdio.
<4>1[ 9822.374941] sdhci_set_clock open
<4>1[ 9822.375017] ***sdhci_set_power: mmc2 always use 1.8V for sdio.
<4>1[ 9822.386517] mmc2, ****************** sdhci_hw_reset ***********
<4>1[ 9822.387420] ***sdhci_set_power: mmc2 always use 1.8V for sdio.
<4>1[ 9822.391696] ***sdhci_set_power: mmc2 always use 1.8V for sdio.
<4>0[ 9822.395050] mmc2: card claims to support voltages below the defined range. These will be ignored.
<4>1[ 9822.402219] mmc2: queuing unknown CIS tuple 0x10 (5 bytes)
<4>1[ 9822.410534] cistpl_funce_common() old_speed=25000000
<4>0[ 9822.413457] sdhci_set_clock open
<4>1[ 9822.414690] mmc2: queuing unknown CIS tuple 0x10 (5 bytes)
<6>0[ 9822.419673] mmc2: new SDIO card at address 1c45
<3>1[ 9822.442332] WLAN: if_sdio_interrupt: card is NULL or sdio init is not completed!
<4>0[ 9822.867593] ****DDRDFS**** do_dbs_timer memfreq_bypass=0,mm_is_on()=0,memfreq_curr=400
<4>0[ 9822.867881] dbs_check_cpu: max_load:48, memfreq_curr:400
<4>0[ 9822.867989] ****DDRDFS**** memfreq_get_demand cpu_load=192, mem_load=0
<4>1[ 9822.937654] SPRD_WDT margin=20, feed_period=3, sys_cnt=9826207, wdt_state=0x1
<3>1[ 9823.354697] WLAN: Wlan Card Control Init Success, Chip Version:4
<3>0[ 9823.701049] WLAN: wlan_set_wap: wlan_set_wap <<<
<3>0[ 9823.701066] connect mac: 0: 0: 0: 0: 0: 0
<4>0[ 9823.867002] ****DDRDFS**** do_dbs_timer memfreq_bypass=0,mm_is_on()=0,memfreq_curr=400
<4>0[ 9823.867138] dbs_check_cpu: max_load:76, memfreq_curr:400
<4>0[ 9823.867216] ****DDRDFS**** memfreq_get_demand cpu_load=304, mem_load=0
<4>0[ 9823.928433] ######[wlan_start_scan_enable_network_info, 925] set start scan!
<6>0[ 9824.411141] rtc alarm set at 1508882369, now 1508882211, rtc delta 0.027341664

# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IML74K
ro.build.version.incremental=eng.daiweiping.20170311.103920
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.3
ro.build.date=2017年 03月 11日星期六 10:41:42 CST
ro.build.date.utc=1489200102
ro.build.type=user
ro.build.user=daiweiping
ro.build.host=user
ro.build.tags=test-keys
ro.product.model=R9
ro.product.brand=R9
ro.product.name=sp6825c2_a10e_ts_ts1_fl
ro.product.device=sp6825c2_a10e_ts_ts1_fl
ro.product.board=sp6825c2_a10e_ts_ts1_fl
ro.product.cpu.abi=armeabi-v7a
ro.custom.build.version=
persist.sys.timezone=Asia/Shanghai
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Spreadtrum
ro.wifi.channels=
ro.board.platform=sc8825
# ro.build.product is obsolete; use ro.product.device
ro.build.product=sp6825c2_a10e_ts_ts1_fl
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=sp6825c2_a10e_ts_ts1_fl-user 4.0.3 IML74K eng.daiweiping.20170311.103920 test-keys
ro.build.fingerprint=R9/sp6825c2_a10e_ts_ts1_fl/sp6825c2_a10e_ts_ts1_fl:4.0.3/IML74K/eng.daiweiping.20170311.103920:user/test-keys
ro.build.characteristics=default
# end build properties
ro.sf.lcd_density=240
ro.sf.lcd_width=54
ro.sf.lcd_height=96
ro.gpu=mali
ro.opengles.version=131072
ro.device.support.mmc=1
hwui.render_dirty_regions=false
ro.hwui.text_cache_width=2048
persist.ttydev=ttyVUART0
ro.device.support.vt=0
#ro.sf.hwrotation=180
#if our product support cmcc feature, then set the value true, else do nothing
#ro.wifi.support.cmcc=true
#if out product support fastboot feature, set as true
persist.sys.support.fastboot=false
#if out product surport trout chip, we set this
#ro.fm.chip.vendor=trout
#if out product surport trout chip, we set this to support hci rset to power off
#ro.bt.trout=true
#if our product support single link version
ro.system.property.singleconn=true
ro.tether.denied=true
ro.baseband.kw_version=true
ro.product.hardware=A10E_V1.0
persist.sys.sign_3g_4g=4
#
# ADDITIONAL_BUILD_PROPERTIES
#
keyguard.no_require_sim=true
ro.com.android.dataroaming=false
ro.device.support.abroad.apn=1
persist.msms.phone_count=2
persist.msms.phone_default=0
lmk.autocalc=false
ksm.support=false
zram.support=false
persist.blcr.enable=0
persist.sys.service.delay=false
ro.callfirewall.disabled=false
persist.support.securetest=1
persist.sys.sprd.modemreset=1
persist.sys.kdump.enable=0
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=128m
persist.gnss.lklt.save_position=true
persist.gnss.lklt.use_gps=true
persist.gnss.lklt.use_net=true
persist.gnss.lklt.inject_time=true
persist.gnss.lklt.inject_pos=true
persist.gnss.lklt.max_interval=21
persist.gnss.lklt.time_unc_pln=0.5352;2.6099;0.1095;0.0024
persist.gnss.lklt.position_file=/data/gnss/lklt.properties
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=BeatPlucker.ogg
ro.config.notification_sound=pixiedust.ogg
ro.build.display.id=KW_6825C_A10E_V1.0_TS1_FL_V1.0_20170311
ro.config.alarm_alert=Alarm_Classic.ogg
ro.product.locale.language=en
ro.product.locale.region=US
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.logappslow=0
ro.build.product.lowmem=0
ro.floatkey.show=false
persist.sys.kb.auto=1
device.support.face.smile=1
device.support.pano=1
device.support.dccaf=1
device.support.dvcaf=1

rda_wlan 182504 0 - Live 0xbf084000
rdafm_drv 12322 0 - Live 0xbf046000
mali 167965 8 - Live 0xbf00e000
ump 31583 17 mali, Live 0xbf000000

RAM: 512 MB (476 MB available)

System RAM: 476.000MB

Flash: 4 GB Build-in (3.648 GB actual)

mmcblk0: 3.648 GB

Touch Screen for Spreadtrum R9

$3.73 Amaoe SU2 For SPREADTRUM SC CPU BGA Stencil IC SC651E SC9850 SC6820 SC9820A SC6500D SC6533G SC6531DA SC9850 Reballing Solder

$3.6 BGA reballing Stencil For SPREADTRUM SC CPU SC7727S SC7731C SC7731G SC9832A/9830A SC6825A SC9850/6820/9820A SC9832E/ SC9863A

$2.39 Amaoe SU:2 BGA Reballing Stencil for SPREADTRUM SC 6531E/9850/6820/9820A/6500D/6533G/6531DA/SC7731E Chip Tin Soldering Net

$1.63 RJ45 Connector Inline LAN Plugs Ethernet Cable Extender Adapter for Cat5 Cat5e Cat6e Cat7 Adapter Female to Female

$2.18 Right Angle USB C Adapter 90 Degree Low Profile Type-C Male to Female Extender

$2.1 90 Degree Left Right Up Down Angled USB 3.0 A Male to Female Extension Connector Adapter for Laptop PC USB Chargers Converter

$3.9 5/10/20Pcs RJ45 Coupler Ethernet Cable Coupler LAN Connector Cat7 Cat6 Cat5e Ethernet Cable Extender Adapter Female to Female

$4.22 RJ45 Cat5e Cat6A Cat7 LAN Cable Tool-less Extension Connector Network Extender Junction Adapter Connection Box

$34.91 Infrared IR Remote Extender Repeater Receiver USB Adapter Transmitter Applies to All Remote Control Devices For set STB Box DVD

$2.61 NNBILI Super Speed 40Gbps USB4 Type C Female to Female 100W Power Data 8K Video Adapter Extender for Laptop Phone with

$31.99 10pcs USB 3.0 Coupler Female to USB Type C Female Adapter Super Speed USB3.0 Type-C Extender Connection Converter

$3.75 USB C Female to Female Coupler 40Gbps 3.2 OTG Adapter Coupler Extender 8K Video 100W Fast Charging for USB4 Cable Thunderbolt 4

$28.11 30Days/Box Nasal Breathing Dilators Starter Kits Magnetic Nose Strips Increase Sports Air Intake Improve Sleeping Reduce Snoring

$26.8 Snore Stopper Nasal Dilator for Snore Reduction Increases Airflow Anti Snoring Devices Silicone Nose Clip Improve Sleep&Snoring

$30.06 USB C Adapter 140W with LED Display 40Gbps USB C Extension Adapter Type C Power Meter Tester USB C Extender USB4 Thunderbolt

$2.11 RJ45 Splitter 1 to 2 Ethernet Adapter Internet Network Cable Extender RJ45 Connector Coupler for PC TV Box Router

$41 TFM Tool Pro 1/2 Years For smartphones on MTK Qualcomm and Spreadtrum

$30.87 1PCS/LOT UMP510G SPREADTRUM In Stock

$2.52 Aamoe Spreadtrum CPU IC Chip BGA Reballing Stencil For SC9850/9820A/651E/SC9832E/SC9863A/SC2721G/SR3595D Tin Template Steel Mesh

$2.58 AMAOE Code SU2 For Spreadtrum SC6531E SE9850 SC6820 SC9820 SC6500D SC6533G SC6531DA SC7731E repair tools ic reballing stencil

Replacement Battery for Spreadtrum R9

Cover Cases for Spreadtrum R9

$3.6 BGA reballing Stencil For SPREADTRUM SC CPU SC7727S SC7731C SC7731G SC9832A/9830A SC6825A SC9850/6820/9820A SC9832E/ SC9863A

$2.39 Amaoe SU:2 BGA Reballing Stencil for SPREADTRUM SC 6531E/9850/6820/9820A/6500D/6533G/6531DA/SC7731E Chip Tin Soldering Net

$3.73 Amaoe SU2 For SPREADTRUM SC CPU BGA Stencil IC SC651E SC9850 SC6820 SC9820A SC6500D SC6533G SC6531DA SC9850 Reballing Solder

$1.63 RJ45 Connector Inline LAN Plugs Ethernet Cable Extender Adapter for Cat5 Cat5e Cat6e Cat7 Adapter Female to Female

$2.1 90 Degree Left Right Up Down Angled USB 3.0 A Male to Female Extension Connector Adapter for Laptop PC USB Chargers Converter

$2.18 Right Angle USB C Adapter 90 Degree Low Profile Type-C Male to Female Extender

$3.9 5/10/20Pcs RJ45 Coupler Ethernet Cable Coupler LAN Connector Cat7 Cat6 Cat5e Ethernet Cable Extender Adapter Female to Female

$4.22 RJ45 Cat5e Cat6A Cat7 LAN Cable Tool-less Extension Connector Network Extender Junction Adapter Connection Box

$34.91 Infrared IR Remote Extender Repeater Receiver USB Adapter Transmitter Applies to All Remote Control Devices For set STB Box DVD

$2.61 NNBILI Super Speed 40Gbps USB4 Type C Female to Female 100W Power Data 8K Video Adapter Extender for Laptop Phone with

$31.99 10pcs USB 3.0 Coupler Female to USB Type C Female Adapter Super Speed USB3.0 Type-C Extender Connection Converter

$28.11 30Days/Box Nasal Breathing Dilators Starter Kits Magnetic Nose Strips Increase Sports Air Intake Improve Sleeping Reduce Snoring

$3.75 USB C Female to Female Coupler 40Gbps 3.2 OTG Adapter Coupler Extender 8K Video 100W Fast Charging for USB4 Cable Thunderbolt 4

$26.8 Snore Stopper Nasal Dilator for Snore Reduction Increases Airflow Anti Snoring Devices Silicone Nose Clip Improve Sleep&Snoring

$30.06 USB C Adapter 140W with LED Display 40Gbps USB C Extension Adapter Type C Power Meter Tester USB C Extender USB4 Thunderbolt

$2.11 RJ45 Splitter 1 to 2 Ethernet Adapter Internet Network Cable Extender RJ45 Connector Coupler for PC TV Box Router

$2.52 Aamoe Spreadtrum CPU IC Chip BGA Reballing Stencil For SC9850/9820A/651E/SC9832E/SC9863A/SC2721G/SR3595D Tin Template Steel Mesh

$41 TFM Tool Pro 1/2 Years For smartphones on MTK Qualcomm and Spreadtrum

$30.87 1PCS/LOT UMP510G SPREADTRUM In Stock

$2.58 AMAOE Code SU2 For Spreadtrum SC6531E SE9850 SC6820 SC9820 SC6500D SC6533G SC6531DA SC7731E repair tools ic reballing stencil

Find Similar devices
Same CPU:
Same Display resolution:
Same ro.build.description:

Link: Here I buy Chinese smartphones and tablets