samsung GT-I9500 Specification

3 Steps to publish Your specification here:

1. Install SpecDevice
2. Run and decode your specs
3. Get your link (read more...)

General
OS details
CPU info
GPU extensions
WiFi kernel messages
build.prop
Modules
Memory map

General Specifications
Manufacturer	samsung
Model	GT-I9500
Firmware	5.0.1; I9500XXUHOF3; SDK21
CPU	4 cores; UNIVERSAL5410 exynos5; Max: 1600.0 MHz; Min: 100.0 MHz
Display	1920 x 1080; DPI: 480; Evaluated Size: 4.6"
Touch screen	NOT multitouch 1 point
GPU	PowerVR SGX 544MP; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.10@2359475
RAM	2048 MB (2045 MB available)
Flash	16 GB Build-in (14.676 GB actual); 32 GB (30.723 GB actual)
Communications
Phone	GSM; Net: HSDPA
WiFi	; IEEE 802.11 b/g/n; Broadcom 4329/30; AP Mode; IEEE 802.11 b/g/n/(a); Exynos 5410 BCM; AP Mode
USB Host	Yes
Bluetooth	Bluetooth 4.0 + HS
GPS	Yes
Advanced Features
Front camera	Photo: 12.8 MP; Max: 4128x3096; Video: 2.1 MP; Max: 1920x1080; Focus: auto macro continuous-picture continuous-video; Flash modes: off auto on torch
Back camera	Photo: 2.1 MP; Max size: 1920x1080; Video: 2.1 MP; Max: 1920x1080; Focus: infinity fixed; Flash modes: off
Sensors	K330 Acceleration Sensor (STMicroelectronics); range: 0...19.613; resolution: 0.001 (0.003%); power: 0.25mA;
	AK8963C Magnetic field Sensor (Asahi Kasei Microdevices); range: 0...2000; resolution: 0.06 (0.003%); power: 6mA;
	K330 Gyroscope Sensor (STMicroelectronics); range: 0...8.727; resolution: 0 (0.004%); power: 6.1mA;
	BMP182 Barometer Sensor (BOSCH); range: 0...1000; resolution: 1 (0.1%); power: 1mA;
	MAX88005 Proximity Sensor (Maxim); range: 0...8; resolution: 5 (62.5%); power: 0.75mA;
	CM3323 Light Sensor (Capella Microsystems, Inc.); range: 0...60000; resolution: 1 (0.002%); power: 0.75mA;
	SHTC1 relative humidity sensor (Sensirion); range: 0...100; resolution: 0.04 (0.04%); power: 0.3mA;
	SHTC1 ambient temperature sensor (Sensirion); range: 0...165; resolution: 0.01 (0.006%); power: 0.3mA;
	Rotation Vector Sensor (AOSP); range: 0...1; resolution: 0 (0%); power: 12.35mA;
	Gravity Sensor (AOSP); range: 0...19.613; resolution: 0.001 (0.003%); power: 12.35mA;
	Linear Acceleration Sensor (AOSP); range: 0...19.613; resolution: 0.001 (0.003%); power: 12.35mA;
Vibrator	Yes
Supported languages	174; Afrikaans; Aghem; Akan; Amharic; Arabic; Assamese; Asu; Azerbaijani; Basaa; Belarusian; Bemba; Bena; Bulgarian; Bambara; Bengali; Tibetan; Breton; Bodo; Bosnian; Catalan; Chiga; Cherokee; Czech; Welsh; Danish; Taita; German; Zarma; Duala; Jola-Fonyi; Dzongkha; Embu; Ewe; Greek; English; Esperanto; Spanish; Estonian; Basque; Ewondo; Persian; Fulah; Finnish; Filipino; Faroese; French; Irish; Galician; Swiss German; Gujarati; Gusii; Manx; Hausa; Hawaiian; Hebrew; Hindi; Croatian; Hungarian; Armenian; Indonesian; Igbo; Sichuan Yi; Icelandic; Italian; Japanese; Ngomba; Machame; Georgian; Kabyle; Kamba; Makonde; Kabuverdianu; Koyra Chiini; Kikuyu; Kazakh; Kako; Kalaallisut; Kalenjin; Khmer; Kannada; Korean; Konkani; Kashmiri; Shambala; Bafia; Cornish; Kyrgyz; Langi; Ganda; Lakota; Lingala; Lao; Lithuanian; Luba-Katanga; Luo; Luyia; Latvian; Masai; Meru; Morisyen; Malagasy; Makhuwa-Meetto; Meta'; Macedonian; Malayalam; Mongolian; Marathi; Malay; Maltese; Mundang; Burmese; Nama; Norwegian; North Ndebele; Nepali; Dutch; Kwasio; Norwegian; Ngiemboon; Nuer; Nyankole; Oromo; Oriya; Punjabi; Polish; Pashto; Portuguese; Romansh; Rundi; Romanian; Rombo; Russian; Kinyarwanda; Rwa; Samburu; Sangu; Sena; Koyraboro Senni; Sango; Tachelhit; Sinhala; Slovak; Slovenian; Shona; Somali; Albanian; Serbian; Swedish; Swahili; Congo Swahili; Tamil; Telugu; Teso; Tajik; Thai; Tigrinya; Turkmen; Tongan; Turkish; Tasawaq; Central Atlas Tamazight; Uyghur; Ukrainian; Urdu; Uzbek; Vai; Vietnamese; Vunjo; Soga; Yangben; Yoruba; Standard Moroccan Tamazight; Chinese; Zulu
Battery	Technology: Li-ion; Voltage: 3972
FM radio	FM Radio
SD Version:	1.1 7

KERNEL: Linux version 3.4.5_Tam_V3 (linux@ubuntu) (gcc version 4.9 20140827 (prerelease) (GCC) ) #41 SMP PREEMPT Sat Oct 24 17:38:28 PDT 2015
CODENAME: REL
Mainboard: universal5410
BRAND: samsung
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: ja3g
DISPLAY: I9500XXUHOF3
FINGERPRINT: samsung/ja3gxx/ja3g:5.0.1/LRX22C/I9500XXUHOF3:user/release-keys
HARDWARE: universal5410
ID: LRX22C
TAGS: release-keys

Processor : ARMv7 Processor rev 2 (v7l)
processor : 0
BogoMIPS : 1590.88
processor : 1
BogoMIPS : 1590.88
processor : 2
BogoMIPS : 1590.88
processor : 3
BogoMIPS : 1590.88
Features : swp half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xc07
CPU revision : 2
Hardware : UNIVERSAL5410
Revision : 000a
Serial : c8f830934d000c13

GL_EXT_debug_marker
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_OES_texture_npot
GL_EXT_discard_framebuffer
GL_EXT_blend_minmax
GL_EXT_multi_draw_arrays
GL_EXT_multisampled_render_to_texture
GL_EXT_shader_texture_lod
GL_EXT_texture_format_BGRA8888
GL_EXT_occlusion_query_boolean
GL_EXT_texture_rg
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_compression_pvrtc2
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_uniform_buffer_object
GL_IMG_multisampled_render_to_texture

<6>[ 5687.551203] B0 21187 thermal_sys: [TMU] ACTIVE: Under active trip temp=64000
<6>[ 5687.556452] B0 21187 PVR_K: SGX change clock [266] Mhz -> [177] MHz req [177] MHz / M[800] / B[4]
<6>[ 5687.556507] B0 21187 PVR_K: SGX change voltage [900000] -> [900000] mV
<6>[ 5687.556693] B0 21187 PVR_K: SGX CCB RO : 63, WO : 63, Total : 75
<4>[ 5687.668082] B3 24845
<4>[ 5687.668100] B3 24845 Dongle Host Driver, version 1.141.64.13 (r)
<4>[ 5687.668135] B3 24845 Compiled in drivers/net/wireless/bcmdhd on Mar 6 2015 at 22:17:30
<4>[ 5687.668188] B3 24845 wl_android_wifi_on in
<4>[ 5687.668223] B3 24845 wifi_platform_set_power = 1
<4>[ 5687.668256] B3 24845 WiFi: trying to acquire BT lock
<4>[ 5687.668291] B3 24845 ####btlock acquired cookie: WiFi
<4>[ 5687.668326] B3 24845 wifi_platform_set_power: btlock acquired
<4>[ 5687.668366] B3 24845 check BCM4335, check_bcm4335_rev
<4>[ 5687.668429] B3 24845 /data/.rev file Found
<4>[ 5687.668468] B3 24845 Found BCM4335B0
<6>[ 5687.668502] B3 24845 ------------------------------------------------
<6>[ 5687.668542] B3 24845 ------------------------------------------------
<6>[ 5687.668588] B3 24845 brcm_wlan_power Enter: power on
<6>[ 5687.668625] B3 24845 gpio_table = [2]
<7>[ 5687.668865] B3 24845 WLAN: GPIO_WLAN_EN = 1
<6>[ 5687.856416] B0 21187 thermal_sys: [TMU] ACTIVE: Under active trip temp=59000
<6>[ 5687.861183] B0 21187 PVR_K: SGX change voltage [900000] -> [900000] mV
<6>[ 5687.861843] B0 21187 PVR_K: SGX change clock [177] Mhz -> [266] MHz req [266] MHz / M[800] / B[4]
<6>[ 5687.861954] B0 21187 PVR_K: SGX CCB RO : 113, WO : 113, Total : 50
<4>[ 5687.871175] B3 24845 sdio_reset_comm():
<6>[ 5687.871443] B3 24845 mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 400000Hz, actual 390625HZ div = 32)
<4>[ 5687.889239] B0 24845 mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
<4>[ 5687.892474] B0 24845 mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
<4>[ 5687.894297] B0 24845 mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
<6>[ 5687.938904] B0 2563 max77803-muic max77803-muic: func:max77803_muic_show_usb_state info->cable_type:0
<6>[ 5687.961372] B0 21187 PVR_K: SGX change voltage [900000] -> [925000] mV
<6>[ 5687.962488] B0 21187 PVR_K: SGX change clock [266] Mhz -> [350] MHz req [350] MHz / M[800] / B[4]
<6>[ 5687.962597] B0 21187 PVR_K: SGX CCB RO : 149, WO : 149, Total : 36
<6>[ 5687.962799] B0 24845 mmc_host mmc1: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
<4>[ 5687.972849] B0 24845 F1 signature OK, socitype:0x1 chip:0x4335 rev:0x1 pkg:0x0
<4>[ 5687.974059] B0 24845 DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
<4>[ 5687.974576] B0 24845 CHIP VER = [0x1]
<4>[ 5687.974620] B0 24845 ----- CHIP bcm4335_B0 -----
<4>[ 5687.974672] B0 24845 dhdsdio_download_firmware: firmware path=/system/etc/wifi/bcmdhd_sta.bin, nvram path=/system/etc/wifi/nvram_net.txt_muratafem1
<6>[ 5688.061189] B0 21187 PVR_K: SGX change voltage [925000] -> [1037500] mV
<6>[ 5688.062284] B0 21187 PVR_K: SGX change clock [350] Mhz -> [480] MHz req [480] MHz / M[800] / B[4]
<6>[ 5688.062365] B0 21187 PVR_K: SGX CCB RO : 182, WO : 182, Total : 33
<4>[ 5688.113705] B0 24845 dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
<6>[ 5688.156303] B0 21187 thermal_sys: [TMU] ACTIVE: Under active trip temp=59000
<4>[ 5688.252198] L0 24845 dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
<6>[ 5688.252606] L0 24845 wake enabled for irq 528
<4>[ 5688.254626] L0 24845 dhd_wl_ioctl: WLC_GET_VAR: cisdump, ret = -23
<4>[ 5688.254664] L0 24845 [WIFI_SEC] dhd_check_module_cid: CIS reading failed, ret=-23
<6>[ 5688.261747] L0 21187 PVR_K: SGX change clock [480] Mhz -> [350] MHz req [350] MHz / M[800] / B[4]
<6>[ 5688.261800] L0 21187 PVR_K: SGX change voltage [1037500] -> [925000] mV
<6>[ 5688.262369] L0 21187 PVR_K: SGX CCB RO : 206, WO : 206, Total : 24
<4>[ 5688.266518] L0 24845 Firmware up: op_mode=0x0015, MAC=5c:77:a7
<4>[ 5688.275048] L0 24845 [WIFI_SEC] sec_control_pm: POWER_VAL = 0
<4>[ 5688.275086] L0 24845 dhdcdc_set_ioctl: SET PM to 0
<4>[ 5688.281283] L1 24845 dhd_wl_ioctl: WLC_SET_VAR: aibss_bcn_force_config, ret = -23
<4>[ 5688.281332] L1 24845 dhd_preinit_ioctls Set aibss_bcn_force_config to 500, 5000, 5000 failed -23
<4>[ 5688.295404] L0 24845 Firmware version = wl0: May 6 2015 14:49:44 version 6.30.171.24.66 (B0 Station/P2P)
<4>[ 5688.296253] L0 24845 [WIFI_SEC] .wifiver.info already saved.
<4>[ 5688.297430] L0 24845 dhd_wl_ioctl: WLC_SET_VAR: ampdu_hostreorder, ret = -23
<4>[ 5688.297475] L0 24845 dhd_preinit_ioctls wl ampdu_hostreorder failed -23
<4>[ 5688.298097] L0 24845 dhd_wl_ioctl: WLC_GET_VAR: pfnlbest, ret = -23
<4>[ 5688.299520] L0 24845 dhd_wl_ioctl: WLC_GET_VAR: cisdump, ret = -23
<4>[ 5688.299564] L0 24845 [WIFI_SEC] dhd_check_module_mac: Check module mac by legacy FW : 5c:77:a7
<4>[ 5688.300529] L0 24845 [WIFI_SEC] Check Mac address in .mac.info
<4>[ 5688.301175] L0 24845 ####btlock released, cookie: WiFi
<4>[ 5688.301218] L0 24845 wl_android_wifi_on() bcm_bt_unlock
<6>[ 5688.302186] L0 24845 CFG80211-INFO2) wl_cfg80211_attach_post : p2p0: p2p_dev_addr=5e:77:a7
<6>[ 5688.456258] L0 21187 thermal_sys: [TMU] ACTIVE: Under active trip temp=55000
<6>[ 5688.566766] L0 21187 PVR_K: SGX change clock [350] Mhz -> [266] MHz req [266] MHz / M[800] / B[4]
<6>[ 5688.566839] L0 21187 PVR_K: SGX change voltage [925000] -> [900000] mV
<6>[ 5688.567417] L0 21187 PVR_K: SGX CCB RO : 244, WO : 244, Total : 38
<6>[ 5688.596603] L0 24845 CFG80211-TRACE) __wl_cfg80211_scan : START SCAN
<4>[ 5688.605536] L0 24845 dhd_set_suspend: Remove extra suspend setting
<3>[ 5688.649525] L0 24845 WLDEV-ERROR) wldev_set_country : wldev_set_country: set country for MY as MY rev 3

# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=LRX22C
ro.build.display.id=I9500XXUHOF3
ro.build.version.incremental=I9500XXUHOF3
ro.build.version.sdk=21
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=5.0.1
ro.build.date=Thu Jun 4 20:19:00 KST 2015
ro.build.date.utc=1433416740
ro.build.type=user
ro.build.user=dpi
ro.build.host=SWDD5515
ro.build.tags=release-keys
ro.product.model=GT-I9500
ro.product.brand=samsung
ro.product.name=ja3gxx
ro.product.device=ja3g
ro.product.board=universal5410
# ro.product.cpu.abi and ro.product.cpu.abi2 are obsolete,
# use ro.product.cpu.abilist instead.
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.cpu.abilist=armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=exynos5
# ro.build.product is obsolete; use ro.product.device
ro.build.product=ja3g
# Do not try to parse description, fingerprint, or thumbprint
ro.build.description=ja3gxx-user 5.0.1 LRX22C I9500XXUHOF3 release-keys
ro.build.fingerprint=samsung/ja3gxx/ja3g:5.0.1/LRX22C/I9500XXUHOF3:user/release-keys
ro.build.characteristics=phone
# Samsung Specific Properties
ro.build.PDA=I9500XXUHOF3
ro.build.hidden_ver=I9500XXUHOF3
ro.config.rm_preload_enabled=0
ro.build.changelist=5065660
ro.product_ship=true
ro.chipname=exynos5410
persist.sys.storage_preload=1
# end build properties
#
# from device/samsung/ja3g/system.prop
#
#
# system.prop for universal_5410
#
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/ttyS0
ro.sf.lcd_density=480
# Multimedia property for Smart View
media.enable-commonsource=true
ro.arch=exynos5410
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.hwui.texture_cache_size=50
ro.hwui.layer_cache_size=34
ro.hwui.path_cache_size=10
ro.hwui.shape_cache_size=4
ro.hwui.gradient_cache_size=2
ro.hwui.drop_shadow_cache_size=6
ro.hwui.text_small_cache_width=2048
ro.hwui.text_small_cache_height=2048
ro.hwui.text_large_cache_width=4096
ro.hwui.text_large_cache_height=4096
ro.config.tima=0
ro.config.timaversion=0
ro.hdcp2.rx=tz
ro.secwvk=220
ro.securestorage.support=false
ro.opengles.version=131072
ro.sf.lcd_density=320
dalvik.vm.heapgrowthlimit=128m
dalvik.vm.heapstartsize=8m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.sec.fle.encryption=true
ro.build.scafe=americano
ro.build.scafe.size=short
ro.build.scafe.shot=single
ro.build.scafe.cream=white
ro.error.receiver.default=com.samsung.receiver.error
ro.config.ringtone=Over_the_horizon.ogg
ro.config.notification_sound=S_Whistle.ogg
ro.config.alarm_alert=Alarm_Morning_flower.ogg
ro.config.media_sound=Media_preview_Touch_the_light.ogg
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.com.google.clientidbase=android-samsung
ro.security.icd.flagmode=single
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=5.0_r2
persist.sys.dalvik.vm.lib.2=libart.so
ro.build.selinux=0
dalvik.vm.isa.arm.features=div
ro.config.knox=0
ro.kernel.qemu=0
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.build.version.sdl=2101

RAM: 2048 MB (2045 MB available)

exynos5-fb.1: 7.910MB
i2c-gpio.22: 1.625MB
System RAM: 2045.000MB

Flash: 16 GB Build-in (14.676 GB actual); 32 GB (30.723 GB actual)

mmcblk0: 14.676 GB
vnswap0: 1.000 GB
mmcblk1: 29.723 GB

Touch Screen for samsung GT-I9500

$1.99 For Samsung Galaxy S3 i9300 i9308 S4 GT-i9500 S5 G900F Front Touch screen Panel LCD Out Glass Cover Lens Replacement

$21.57 AAA Quality S4 LCD For Samsung S4 LCD Display Touch Screen With Frame Assembly For S4 GT-GT-i905 i9500 i9506 LCD Repair

$14 5.0" Super AMOLED S4 LCD For Samsung S4 GT-i9505 i9500 i9505 i545 i337 LCD Display Touch Screen Digitizer Replacement

$35.6 for SAMSUNG Galaxy S4 LCD Display Touch Screen Digitizer GT-i9505 i9500 i9505 i9506 i9515 i337 Replacement Repair Spare Parts

$11.8 10Pcs\lot For Samsung Galaxy S3 i9300 i9308 S4 GT-i9500 S5 G900F Front Touch screen Panel LCD Out Glass Cover Lens Replacement

$15.79 For SAMSUNG Galaxy S4 LCD Display With Frame GT-i9500 GT-i9505 i337 LCD Touch Screen Digitizer Assembly

$21.57 NEW 5.0''S4 LCD For Samsung S4 LCD Display Touch Screen With Frame Assembly For S4 GT-GT-i905 i9500 i9506 LCD Repair

$22.99 For Samsung Galaxy S4 gt- i9500 i9505 i337 Touch Screen Digitizer Glass Sensor + LCD Display Panel Monitor Assembly + Frame

$335.64 for Lcd assembly Touch Screen Digitize screen for samsung Galaxy S4 GT-i9500 GT-i9505 i337 i545 lcd with frame

Replacement Battery for samsung GT-I9500

Cover Cases for samsung GT-I9500

Find Similar devices
Same CPU:
Same Display resolution:
Same ro.build.description:

Link: Here I buy Chinese smartphones and tablets