1. Install SpecDevice
2. Run and decode your specs
3. Get your link (read more...)
General Specifications | |
---|---|
Manufacturer | LT_MOBILE |
Model | C800 |
Firmware | 4.0.4; eng.android.1387267450; SDK15 |
CPU | 2 cores; ARMv7 Processor rev 0 (v7l); Max: ١٠٠١٫٠ MHz; Min: ٢٥٠٫٢ MHz |
Display | 960 x 540; DPI: 240; Evaluated Size: ٤٫٦" |
Touch screen | Multitouch 5 points |
GPU | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.8@2116011 |
RAM | 1024 MB (1009 MB available) |
Flash | 4 GB (3.620 GB actual); 16 GB (14.879 GB actual) (see memory map tab) |
Communications | |
Phone | CDMA, Dual SIM; Net: 1xRTT |
WiFi | wlan; IEEE 802.11 a/b/g/n; MediaTek MT6620; AP Mode |
USB Host | Yes |
Bluetooth | Bluetooth 4.0+HS |
GPS | Yes |
Advanced Features | |
Front camera | Photo: 8.8 MP; Max: 3584x2448; Focus: auto continuous-picture continuous-video macro infinity manual fullscan; Flash modes: auto on off torch |
Back camera | Photo: 4.9 MP; Max size: 2560x1920; Focus: infinity; No flash |
Sensors | yamaha530 3-axis Magnetic Field sensor (Aichi Steel); range: 0...٦٠٠٫٠٠٠; resolution: ٠٫٠٠٢ (٠٫٠٠٠%); power: ٠٫٢٥٠mA; |
bma222 3-axis Accelerometer (The Android Open Source Project); range: 0...٣٢٫٠٠٠; resolution: ٠٫٠٠٤ (٠٫٠١٢%); power: ٠٫١٣٠mA; | |
tmd2771 Proximity Sensor (Capella); range: 0...١٫٠٠٠; resolution: ١٫٠٠٠ (١٠٠٫٠٠٠%); power: ٠٫١٣٠mA; | |
tmd2771 Light Sensor (Capella); range: 0...١٠٢٤٠٫٠٠٠; resolution: ١٫٠٠٠ (٠٫٠١٠%); power: ٠٫١٣٠mA; | |
Vibrator | Yes |
Supported languages | 43; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
Battery | Technology: Li-ion; Voltage: 3835 |
FM radio | 76 to 108MHz |
SD Version: | 1.1 7 |
KERNEL: Linux version 3.0.13 (android@android-6) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Tue Dec 17 16:03:59 CST 2013
CODENAME: REL
Mainboard: gionee17_dt_ics2
BRAND: LT_MOBILE
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: GiONEE
DISPLAY: SV1.0
FINGERPRINT: alps/gionee17_dt_ics2/gionee17_dt_ics2:4.0.4/IMM76D/1387267450:user/test-keys
HARDWARE: mt6577
ID: IMM76D
TAGS: test-keys
Processor : ARMv7 Processor rev 0 (v7l)
processor : 0
BogoMIPS : 1993.93
processor : 1
BogoMIPS : 2000.48
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc09
CPU revision : 0
Hardware : MT6577
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<7>[10178.766356] (1)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 12601538 > 8ms
<7>[10178.766387] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[10178.783138] (1)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 9795385 > 8ms
<7>[10178.783173] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[10178.798796] (1)[25379:dmesg] exit
<7>[10178.799019] (1)[25379:dmesg] sig 17 to [25378:AsyncTask #3]
<7>[10178.799918] (1)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 11442692 > 8ms
<7>[10178.799960] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<5>[10178.812095] (0)[Power/clkmgr] [freq_meter] data = 15495, freq = 196 MHz
<7>[10178.814736] (0)[786:WifiStateMachin] fork [25380:WifiStateMachin]
<7>[10178.814792] (1)[25380:WifiStateMachin] set proc[25380] name: ->[loadDriverThrea]
<7>[10178.816731] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 12015077 > 8ms
<7>[10178.816776] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<6>[10178.827338] (1)[WLAN] rfkill_set_block(blocked 0)
<6>[10178.827349] (1)[WLAN] Power on
<3>[10178.827364] (1)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[10178.827383] (1)[STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[10178.827523] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[10178.827539] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(not defined)
<3>[10178.827550] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO126)
<3>[10178.827560] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(not defined)
<3>[10178.827572] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[10178.827582] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO81)
<3>[10178.827593] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(2)
<3>[10178.827603] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO66)
<3>[10178.827613] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(10)
<3>[10178.827623] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<3>[10178.827633] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[10178.827644] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[10178.827666] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[10178.827681] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[10178.827693] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[10178.827703] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_CK(not defined)
<3>[10178.827714] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_WS(not defined)
<3>[10178.827724] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_DAT(not defined)
<3>[10178.827735] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(GPIO72)
<3>[10178.827745] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(GPIO125)
<3>[10178.827755] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[10178.827768] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<3>[10178.827779] (0)[WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[10178.827796] (0)[WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[10178.827809] (0)[WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<7>[10178.840578] (0)[492:er.ServerThread] fork [25381:er.ServerThread]
<7>[10178.850276] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 11099769 > 8ms
<7>[10178.850324] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[10178.850476] (1)[25381:er.ServerThread] set proc[25381] name: ->[Thread-487]
<7>[10178.853061] (1)[25381:Thread-487] exit
<7>[10178.867022] (0)WQ_WARN: cpu:4, proc:kworker/u:1, dur: 10383539 > 8ms
<7>[10178.867089] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[10178.883778] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 11782846 > 8ms
<7>[10178.883809] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[10178.900561] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 11904539 > 8ms
<7>[10178.900591] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[10178.917326] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 10266385 > 8ms
<7>[10178.917356] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[10178.934125] (0)WQ_WARN: cpu:4, proc:kworker/u:1, dur: 11239692 > 8ms
<7>[10178.934164] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[10178.950887] (0)WQ_WARN: cpu:4, proc:kworker/u:1, dur: 9855385 > 8ms
<7>[10178.950926] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[10178.967720] (0)WQ_WARN: cpu:4, proc:kworker/u:1, dur: 9678308 > 8ms
<7>[10178.967781] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[10178.984460] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 9553154 > 8ms
<7>[10178.984509] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[10179.001252] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 8664769 > 8ms
<7>[10179.001313] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[10179.018028] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 9126539 > 8ms
<7>[10179.018079] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<3>[10179.032686] (0)[WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[10179.032722] (0)[WMT-PLAT][E]wmt_plat_i2s_ctrl(1035):[MT6620]Error:FM digital mode set, but no I2S GPIOs defined
<3>[10179.032747] (0)[WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<3>[10179.032948] (0)[WMT-LIB][I]wmt_lib_ps_handler:MT6620 Not Ready, Dont Send Sleep/Wakeup Command
<4>[10179.032972] (0)[STP-PSM] [E]_stp_psm_notify_stp(1137):ERROR! Invalid Action!!
<4>[10179.032983] (0)
<3>[10179.033035] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[10179.033061] (0)[WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[10179.033081] (0)[WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:ALL EINT not defined
<3>[10179.033103] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<4>[10179.033445] (0)mtk_get_bus_freq() return 260000
<3>[10179.033802] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[10179.033824] (0)Flush type = 4 Rx Queue
<3>[10179.034040] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[10179.034067] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[10179.034090] (0)[STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[10179.034108] (0)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[10179.034130] (0)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<6>[10179.034157] (0)[STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[10179.034178] (0)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[10179.034200] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[10179.034222] (0)[STP] mtk_wcn_stp_assert:[I] set f/w assert (0)
<7>[10179.034775] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 8625692 > 8ms
<7>[10179.034824] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<3>[10179.039792] (0)[WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6620)
<3>[10179.045345] (0)[WMT-IC][I]mt6620_ver_check:MT6620: read hw_ver (hw version) (0x8a11)
<3>[10179.050932] (0)[WMT-IC][I]mt6620_ver_check:MT6620: read fw_ver (rom version) (0x8a10)
<3>[10179.050964] (0)[WMT-IC][I]mt6620_find_wmt_ic_info:found ic info(0x8a11) by full match! index:3
<3>[10179.050992] (0)[WMT-IC][I]mt6620_ver_check:MT6620: wmt ic info: MT6620.E4 (0x8a11, WMTHWVER:3, patch_ext:_e3)
<3>[10179.051020] (0)[WMT-CORE][I]wmt_core_hw_check:chip id(0x6620) ver_check ok
<3>[10179.062029] (1)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[10179.062053] (1)[WMT-IC][I]mt6620_sw_init:WMT-CORE: change baudrate(4000000) ok
<3>[10179.064010] (0)[WMT-IC][I]mt6620_update_patch_name:full firmware patch name: /system/etc/firmware/mt6620_patch_e3_hdr.bin
<3>[10179.064400] (0)[WMT-IC][I]mt6620_patch_dwn:===========================================
<3>[10179.064417] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Built Time = 20120927163427
<3>[10179.064430] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[10179.064440] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[10179.064451] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Ph Ver = 0x0014
<3>[10179.064461] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Platform = 1222
<3>[10179.064472] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Content Size = 0xa374
<3>[10179.064994] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Content CRC = 0x5ba0
<3>[10179.065009] (0)[WMT-IC][I]mt6620_patch_dwn:===========================================
<7>[10179.085153] (1)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 8549692 > 8ms
<7>[10179.085200] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[10179.101858] (1)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 9049769 > 8ms
<7>[10179.101893] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[10179.118641] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 9241154 > 8ms
<7>[10179.118680] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[10179.152225] (1)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 10394692 > 8ms
<7>[10179.152257] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[10179.192111] (1)[25371:Thread-532] exit
<7>[10179.202307] (0)[25376:Thread-533] exit
<6>[10179.212577] (0)[Power/Battery] [EM] FG_Battery_CurrentConsumption : 2664/10 mA
<7>[10179.213042] (0)WQ_WARN: cpu:0, proc:kworker/0:0, dur: 310526615 > 8ms
<7>[10179.213063] (0)work: thermal_zone_device_check+0x0/0x18
<7>[10179.219200] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 25112615 > 8ms
<7>[10179.219234] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[10179.235965] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 11371154 > 8ms
<7>[10179.235988] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<3>[10179.379794] (0)[WMT-IC][I]mt6620_patch_dwn:wmt_core: patch dwn:0 frag(42, 844) ok
<3>[10179.379862] (0)[WMT-IC][I]mt6620_sw_init:Not to check the patch validity
<3>[10179.380268] (0)[WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf142be0)
<3>[10179.385037] (0)[WMT-IC][I]mt6620_sw_init:init_coex ok
<6>[10179.385492] (0)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[10179.385506] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[10179.385518] (0)[STP] mtk_wcn_stp_assert:[I] set f/w assert (0)
<3>[10179.385528] (0)[WMT-IC][I]mt6620_sw_init:enable host STP-UART-FULL mode
<3>[10179.404646] (0)[WMT-IC][I]mt6620_sw_init:set fm mode (2) ok
<6>[10179.404675] (0)[STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[10179.404699] (0)[STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[10179.404721] (0)mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[10179.404738] (0)board_sdio_ctrl force off before on
<6>[10179.404753] (0)mtk_wcn_cmb_sdio_off (3)
<5>[10179.404883] (0)[Power/clkmgr] [freq_meter] data = 15494, freq = 196 MHz
<5>[10179.404997] (0)[Power/clkmgr] [freq_meter] data = 15494, freq = 196 MHz
<6>[10179.405031] (0)mtk_wcn_cmb_sdio_on (3)
<5>[10179.405151] (0)[Power/clkmgr] [freq_meter] data = 15494, freq = 196 MHz
<3>[10179.405185] (0)msdc3 -> USR Resume <- msdc_pm() : L<1716> PID
<7>[10179.420401] (0)WQ_WARN: cpu:4, proc:kworker/u:1, dur: 13709692 > 8ms
<7>[10179.420453] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<3>[10179.422701] (0)msdc3 -> ================ <- msdc_set_mclk() : L<976> PID
<3>[10179.422739] (0)msdc3 -> !!! Set<400KHz> Source<197000KHz> -> sclk<397KHz> DDR<0> mode<0> div<124> <- msdc_set_mclk() : L<978> PID
<3>[10179.422770] (0)msdc3 -> ================ <- msdc_set_mclk() : L<979> PID
<7>[10179.437153] (0)WQ_WARN: cpu:4, proc:kworker/u:1, dur: 8221076 > 8ms
<7>[10179.437187] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<3>[10179.449338] (0)msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1788> PID
<3>[10179.470175] (0)msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<4138> PID
<3>[10179.470213] (0)msdc3 -> ================ <- msdc_set_mclk() : L<976> PID
<3>[10179.470230] (0)msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<978> PID
<3>[10179.470246] (0)msdc3 -> ================ <- msdc_set_mclk() : L<979> PID
<6>[10179.471406] (0)mmc2: new high speed SDIO card at address 0001
<6>[10179.473136] (1)[WMT-DFT][I]hif_sdio_probe:start!
<6>[10179.473152] (1)[WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x20a) num(0x1)
<6>[10179.473162] (1)[WMT-DFT][I]hif_sdio_probe:card->info[0]: MediaTek MT6620 Wireless Combo Chip
<6>[10179.473173] (1)[WMT-DFT][I]hif_sdio_probe:card->info[1]:
<6>[10179.473181] (1)[WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[10179.473349] (1)[WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(524288)
<7>[10179.473390] (1)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 66153308 > 8ms
<7>[10179.473413] (1)work: mmc_rescan+0x0/0x324
<7>[10179.487494] (0)WQ_WARN: cpu:4, proc:kworker/u:1, dur: 10373231 > 8ms
<7>[10179.487533] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[10179.504347] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 11199693 > 8ms
<7>[10179.504398] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[10179.521098] (0)WQ_WARN: cpu:4, proc:kworker/u:1, dur: 10311231 > 8ms
<7>[10179.521151] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[10179.537844] (0)WQ_WARN: cpu:4, proc:kworker/u:1, dur: 8853231 > 8ms
<7>[10179.537876] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[10179.554622] (0)WQ_WARN: cpu:4, proc:kworker/u:1, dur: 9818385 > 8ms
<7>[10179.554651] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<6>[10179.562588] (1)[WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[10179.562795] (1)[2:kthreadd] fork [25382:kthreadd]
<6>[10179.562849] (1)[WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<5>[10179.562886] (1)[wlan] net_device prDev(0xcb897000) allocated
<4>[10179.564365] (0)[RT_MONITOR]WARNNING [25382:ksdioirqd/mmc2] SET NOT ALLOW RT Prio [1] for proc [25382:ksdioirqd/mmc2]
<5>[10179.564566] (1)[wlan] Open FW image: WIFI_RAM_CODE done
<5>[10179.565121] (1)[wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[10179.565517] (1)[wlan] Virtual Address = e2863000 for COMMON MGMT MEMORY POOL.
<5>[10179.565534] (1)[wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[10179.565556] (1)[wlan] Virtual Address = e2888000 for SW_RFB_T.
<5>[10179.565569] (1)[wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[10179.565589] (1)[wlan] Virtual Address = e288c000 for MSDU_INFO_T.
<6>[10179.565604] (1)[wlan] wlanAdapterStart(): Acquiring LP-OWN
<7>[10179.571398] (0)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 10732461 > 8ms
<7>[10179.571436] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<6>[10179.582581] (0)[wlan] Chip ID: 0x6620
<6>[10179.582597] (0)[wlan] Revision ID: 0x1
<7>[10179.588169] (0)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 11605077 > 8ms
<7>[10179.588199] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[10179.604952] (1)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 10539308 > 8ms
<7>[10179.604988] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[10179.621714] (1)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 10620154 > 8ms
<7>[10179.621774] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[10179.638495] (1)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 10674308 > 8ms
<7>[10179.638557] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[10179.655270] (1)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 10811154 > 8ms
<7>[10179.655299] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[10179.672047] (1)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 11801000 > 8ms
<7>[10179.672105] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[10179.688833] (1)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 10648615 > 8ms
<7>[10179.688863] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[10179.705608] (0)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 10840539 > 8ms
<7>[10179.705637] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[10179.722381] (0)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 12445077 > 8ms
<7>[10179.722503] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[10179.739154] (1)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 12350462 > 8ms
<7>[10179.739180] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<6>[10180.243504] (0)[wlan] wlanAdapterStart(): Waiting for Ready bit..
<6>[10180.522906] (0)[Power/Battery] [EM] FG_Battery_CurrentConsumption : 2664/10 mA
<7>[10180.524415] (0)WQ_WARN: cpu:0, proc:kworker/0:0, dur: 311931385 > 8ms
<7>[10180.524479] (0)work: thermal_zone_device_check+0x0/0x18
<6>[10180.622720] (0)[wlan] Ready bit asserted
<5>[10180.652664] (1)[wlan] [wifi] wlan%d netif_carrier_off
<6>[10180.652728] (1)[wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[10180.653396] (1)[wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[10180.653749] (1)[wlan] Domain: map=0, idx=0, code=0x0000
<7>[10180.654499] (1)[2:kthreadd] fork [25383:kthreadd]
<5>[10180.655168] (1)[wlan] tx_thread starts running...
<6>[10180.659523] (1)[WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(20a) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[10180.659575] (1)[WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[10180.659639] (1)[WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 coredump:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[10180.659771] (1)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<3>[10180.659861] (1)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<4>[10180.661731] (0)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<7>[10180.664615] (1)[25380:loadDriverThrea] exit
<6>[10180.677740] (1)[RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[10180.677768] (1)ADDRCONF(NETDEV_UP): wlan0: link is not ready
<5>[10180.679350] (0)init: starting `wpa_supplicant`
<7>[10180.679531] (0)[1:init] fork [25384:init]
<7>[10180.680185] (1)[25384:init] set proc[25384] name: ->[logwrapper]
<7>[10180.681993] (1)[2:kthreadd] fork [25385:kthreadd]
<7>[10180.682542] (1)[25384:logwrapper] fork [25386:logwrapper]
<7>[10180.683236] (0)[25386:logwrapper] set proc[25386] name: ->[wpa_supplicant]
<7>[10180.692851] (1)WQ_WARN: cpu:1, proc:kworker/1:1, dur: 14986538 > 8ms
<7>[10180.692924] (1)work: wlanSetMulticastListWorkQueue+0x0/0x1f4 [wlan]
<4>[10180.752474] (0)dbs_check_cpu: turn off CPU1
<5>[10180.759439] (0)[Power/Battery] [use_chip_trim_value] 3895 -> 3856
<4>[10180.762501] (0)hp_work_handler: cpu_down kick off
<7>[10180.762584] (1)[2:kthreadd] fork [25387:kthreadd]
<7>[10180.762673] (1)[2:kthreadd] fork [25388:kthreadd]
<4>[10180.762897] (1)[Power/hotplug] platform_cpu_disable, cpu: 1
<4>[10180.763068] (1)[Power/hotplug] platform_cpu_die, cpu: 1
<5>[10180.763078] (0)CPU1: shutdown
<4>[10180.763085] (0)[Power/hotplug] platform_cpu_kill, cpu: 1
<4>[10180.763098] (1)[Power/hotplug] cpu_enter_lowpower
<7>[10180.765801] (0)[25369:ksoftirqd/1] exit
<4>[10180.766140] (0)[WDK]:start Stop CPU:1
<4>[10180.766150] (0)[WDK]cpu 1 plug off, wk_stop_kick_cpu
<7>[10180.766264] (0)[25366:migration/1] exit
<7>[10180.766399] (0)[25388:kworker/1:3] exit
<4>[10180.766451] (0)hp_work_handler: cpu_down completion
<5>[10180.773026] (0)[Power/Battery] [use_chip_trim_value] 3895 -> 3856
<5>[10180.773981] (0)[Power/Battery] [use_chip_trim_value] -21 -> -20
<7>[10180.779901] (0)[786:WifiStateMachin] fork [25389:WifiStateMachin]
<5>[10180.781282] (0)[Power/Battery] [FGADC] 0,3856,0,-20,4103,92,71,35,1742,1742,67,0,0,1000,0,4026,1000,28,29,4234,92,103
<0>[10180.781495] (0)[MUSB]mt_usb_disconnect 275: [MUSB] USB is ready for disconnect
<7>[10180.783260] (0)[25389:WifiStateMachin] set proc[25389] name: ->[WifiMonitor]
<5>[10180.789905] (0)[Power/Battery] [use_chip_trim_value] 3957 -> 3917
<5>[10180.789925] (0)[Power/Battery] [tbat_workaround] 290,306,0,391,43
<5>[10180.836638] (0)[Power/Battery] [BATTERY:AVG] BatTemp:29 Vbat:4068 VBatSen:4031 SOC:71 ChrDet:0 Vchrin:55 Icharging:30 ChrType:1 USBstate:1 gADC_I_SENSE_offset:-5
<4>[10180.836738] (0)[TestMode] Disable Safty Timer : no UI display
<7>[10180.862552] (0)[25372:kworker/1:1] exit
<7>[10180.862619] (0)[25385:kworker/1:2] exit
<7>[10180.862666] (0)[25368:kworker/1:0] exit
<7>[10180.862704] (0)[25387:workqueue_trust] exit
<5>[10180.912867] (0)[wlan] N=0 closed
<5>[10180.912891] (0)[wlan] EVENT-ROAMING ABORT: Current Time = 9841600
<5>[10180.912906] (0)[wlan] [13] TRANSITION: [0] -> [0]
<6>[10180.915943] (0)[wlan] NAF=0,0,0
<6>[10180.915960] (0)[wlan] NAF=0,0,0
<5>[10181.076774] (0)[wlan] [13] TRANSITION: [0] -> [2]
<5>[10181.164740] (0)[Power/Alarm] alarm 0 set 1482946376.172000000
<7>[10181.441934] (0)[132:em_svr] fork [25390:em_svr]
<7>[10181.442897] (0)[25378:AsyncTask #3] fork [25391:AsyncTask #3]
<7>[10181.443733] (0)[25390:em_svr] fork [25392:em_svr]
<7>[10181.443882] (0)[25390:em_svr] exit
<7>[10181.443960] (0)[25390:em_svr] sig 17 to [132:em_svr]
<7>[10181.444136] (0)[132:em_svr] fork [25393:em_svr]
<7>[10181.444646] (0)[25393:em_svr] fork [25394:em_svr]
<7>[10181.444787] (0)[25393:em_svr] exit
<7>[10181.444861] (0)[25393:em_svr] sig 17 to [132:em_svr]
<7>[10181.447665] (0)[25392:em_svr] set proc[25392] name: ->[kd]
<7>[10181.448801] (0)[278:kd] fork [25395:kd]
<7>[10181.449656] (0)[25392:kd] exit
<7>[10181.449756] (0)[25392:kd] sig 17 to [1:init]
<3>[10181.449914] (0)init: untracked pid 25392 exited
<7>[10181.450067] (0)[25395:kd] exit
<7>[10181.450156] (0)[25395:kd] sig 17 to [278:kd]
<7>[10181.450405] (0)[25394:em_svr] fork [25396:em_svr]
<7>[10181.450433] (0)[25396:em_svr] set proc[25396] name: ->[sh]
<7>[10181.452547] (0)[25396:sh] fork [25397:sh]
<7>[10181.453273] (0)[25397:sh] set proc[25397] name: ->[touch]
<7>[10181.455807] (0)[25397:touch] exit
<7>[10181.455956] (0)[25397:touch] sig 17 to [25396:sh]
<7>[10181.456150] (0)[25396:sh] exit
<7>[10181.456267] (0)[25396:sh] sig 17 to [25394:em_svr]
<7>[10181.456526] (0)[25394:em_svr] set proc[25394] name: ->[ku.sud]
<7>[10181.457440] (0)[222:ku.sud] fork [25398:ku.sud]
<7>[10181.457938] (0)[25398:ku.sud] fork [25399:ku.sud]
<7>[10181.458095] (0)[25398:ku.sud] exit
<7>[10181.458576] (0)[25394:ku.sud] exit
<7>[10181.458669] (0)[25394:ku.sud] sig 17 to [1:init]
<3>[10181.458807] (0)init: untracked pid 25394 exited
<7>[10181.458944] (0)[25399:ku.sud] exit
<7>[10181.459040] (0)[25399:ku.sud] sig 17 to [1:init]
<3>[10181.459134] (0)init: untracked pid 25399 exited
<7>[10181.466010] (0)[25391:AsyncTask #3] set proc[25391] name: ->[dmesg]
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IMM76D
ro.build.version.incremental=eng.android.1387267450
ro.custom.build.version=1387267450
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=Tue Dec 17 16:09:31 CST 2013
ro.build.date.utc=1387267771
ro.build.type=user
ro.build.user=android
ro.build.host=android-6
ro.build.tags=test-keys
ro.product.board=gionee17_dt_ics2
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.locale.language=ar
ro.product.locale.region=EG
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=gionee17_dt_ics2
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=gionee17_dt_ics2-user 4.0.4 IMM76D eng.android.1387267450 test-keys
ro.build.fingerprint=alps/gionee17_dt_ics2/gionee17_dt_ics2:4.0.4/IMM76D/1387267450:user/test-keys
ro.build.flavor=
ro.build.characteristics=default
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=ALPS.ICS2.6577.SP.V1
ro.mediatek.platform=MT6577
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.ICS2.6577.SP
# end mediatek build properties
# begin gionee build properties
ro.gn.syscolor.default.prop=
ro.gn.theme.prop=yes
ro.gn.theme.default=/system/app/Business.gnz
ro.gn.extmodel=C800
ro.gn.extvernumber=CBD7602LT_0301_V0413
ro.gn.extHWvernumber=Mainboard_P3
ro.gn.oversea.product=yes
ro.gn.gnznvernumber=CBD7602LT_0301_V0413
ro.gn.gnvernumber=CBD7602LT_0301_V0413
ro.gn.gnprojectid=CBD7602
ro.gn.gnproductid=CBD7602LT_0301
ro.gn.phone=yes
ro.gn.contacts.support=yes
ro.gn.ip.dial=no
ro.gn.3rd.aoranumarea.prop=no
ro.gn.msgbox.prop=yes
ro.gn.msg.contactpicker=
ro.gn.phone.vibrateOnConnect=yes
ro.gn.phone.overturnMute=yes
ro.gn.phone.powerOnRing=yes
ro.gn.double.ip.dial=no
ro.gn.optrspecsegdef=NONE
ro.gn.gncamera.support=yes
persist.sys.timezone=Asia/Shanghai
ro.build.display.id=SV1.0
ro.product.model=C800
ro.product.brand=LT_MOBILE
ro.product.name=LT_MOBILE
ro.product.device=GiONEE
ro.product.manufacturer=LT_MOBILE
ro.cta.support=no
ro.gn.3rd.aorapim.prop=no
ro.gn.match.numberlength=8
ro.gn.default.videocall=Default.mp3
ro.gn.display.single.imei=no
ro.gn.mmi.test=yes
gsm.cdma.cp.hrpd.paging.off=0
ro.gn.gnvernumberrel=08
# end gionee build properties
ro.gn.soundrecorder.support=yes
ro.gn.contacts.newfeature=yes
ro.gn.gemini.support=
ro.gn.wcdma.support=no
ro.gn.cta.support=no
ro.gn.aoranumareaupdate.prop=no
# end gionee build properties
ro.gn.zoomclipview.prop=yes
ro.gn.popupmsg.prop=yes
ro.gn.encryption.prop=yes
ro.gn.transparent.prop=yes
ro.gn.shutdown.cbp=yes
ro.gn.cdma.support.gsm.mms=yes
ro.gn.ct.wlan.support=no
ro.config.cwenable=0
ro.gn.cdma.3rdapp.delsupport=
ro.ct.epush.support=
ro.gn.gemini.message.support=yes
ro.gn.gemini.dialpad.support=yes
ro.gn.mms.add.calllog.support=yes
ro.gn.oversea.custom=LT_MOBILE
ro.gn.cdma.pcmodem.support=yes
ro.gn.msg.delivered.icon.prop=yes
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=128m
# Encrypt phone function
ro.crypto.tmpfs_options=mode=0771,uid=1000,gid=1000
ro.crypto.fs_type=ext4
ro.crypto.fs_real_blkdev=/emmc@usrdata
ro.crypto.fs_mnt_point=/data
ro.crypto.fs_options=noauto_da_alloc
ro.crypto.fs_flags=0x00000406
# USB MTP WHQL
ro.sys.usb.mtp.whql.enable=0
# Power off opt in IPO
sys.ipo.pwrdncap=2
ro.sys.usb.storage.type=mtp,mass_storage
# CBP
# Gionee xionglin 20120413 added for cbp start
# default network
ro.telephony.default_network=4
# current phone type
gsm.current.phone-type=2
# data call retry times
net.cdma.datacall.retry_times=30
# customer support
ro.oem.customer.support=0x80DF
# ril version
ro.oem.ril.version=6
# indicate if need to erase all sms stored in cbp
# 0-erase 1-not erase
ril.cmgd.count=0
# cp download finished
# 0-not download 1-downloaded
com.gionee.via.cbp.download=0
# not used now ...
#ro.viatel.device.at
#ro.viatel.device.data
#ro.viatel.device.ets
#ro.viatel.device.gps
#ro.viatel.device.pcv
# use UART2 to download cbp boot.rom
ro.viatel.device.asci=ttyMT1
# use ttyVUSB2 to download cbp cp.rom
ro.viatel.device.fls=ttyVUSB2
# property used for fsm uploading via pingpang mechanism.
persist.viatel.flashless.fsm=0
#Gionee xionglin 20120413 added for cbp end
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.sf.hwrotation=0
ril.current.share_modem=2
launcherplus.allappsgrid=2d
launcher2.allappsgrid=3d_20
curlockscreen=2
ro.mediatek.gemini_support=true
drm.service.enabled=true
fmradio.driver.enable=1
dalvik.vm.mtk-stack-trace-file=/data/anr/mtk_traces.txt
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.config.ringtone=Default.mp3
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
wlan 286064 0 - Live 0xbf1fd000 (P)
cfg80211 121448 0 - Live 0xbf1d4000
mtk_fm_priv 8917 0 - Live 0xbf1ce000 (P)
mt6620_fm_drv 111717 1 mtk_fm_priv, Live 0xbf1a6000
mtk_stp_bt 39862 0 - Live 0xbf199000
mtk_stp_gps 37318 0 - Live 0xbf18c000
mtk_stp_uart 21601 1 - Live 0xbf183000 (P)
mtk_stp_wmt 374980 7 wlan,mtk_fm_priv,mt6620_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf119000 (P)
mtk_hif_sdio 18777 2 wlan,mtk_stp_wmt, Live 0xbf110000
devinfo 840 0 - Live 0xbf10c000 (P)
devapc 4557 0 - Live 0xbf107000 (P)
sec 90381 0 - Live 0xbf0ea000 (P)
vcodec_kernel_driver 28298 2 - Live 0xbf0de000 (P)
m4u 114444 10 - Live 0xbf0b9000 (P)
ccmni 17062 0 - Live 0xbf0b0000 (P)
ccci 117809 15 ccmni, Live 0xbf088000 (P)
ccci_plat 126258 2 ccmni,ccci, Live 0xbf060000 (P)
mtk_drvb_77 6085 0 - Live 0xbf05b000 (P)
mtklfb 23534 0 - Live 0xbf051000
pvrsrvkm 234209 97 mtklfb, Live 0xbf009000
aed 16264 3 - Live 0xbf000000 (P)
RAM: 1024 MB (1009 MB available)
System RAM: 1009.000MB
mtkfb.0: 5.000MB
Flash: 4 GB (3.620 GB actual); 16 GB (14.879 GB actual)
mmcblk0: 3.620 GB
mmcblk1: 14.879 GB
Touch Screen for LT_MOBILE C800
$51.33 KORIN Multifunction Crossbody Bag Cut-resistant Waterproof Running Sports Waist Bags Messenger Chest Bag Dropshipping Wholesale
$10.6 Custom Circular Stickers Personalized Logo Sticker Adhesive Labels Wedding Party Decoration Stationery Sticker Thank you Sticker
$20.32 50pcs 30ml 50ml Travel Plastic Clear Keychain Bottles Leakproof Squeeze Container with Flip Cap for Cosmetics Refillable Bottle
$10.13 Dog Cat Flap Door with 4 Way Security Lock Flap Door for Dog Cats Kitten ABS Plastic Small Pet Gate Door Kit Cat Dogs Flap Doors
$27.91 Vention 8K HDMI 2.1 Cable 120Hz 48Gbps Fiber Optic HDMI Cable Ultra High Speed HDR eARC for HD Samsung LG TV Box PS5 Cable HDMI
$15.13 Mini USB Book Lights Portable USB LED Lamps DC 5V Ultra Bright Reading Lamp For Power Bank Camping PC Laptops USB Night Lights
$5.11 50/200/500 Eyelash Patches For Building Grafted Eyelash Pads Russian Packing Under Eyes Paper Stickers For Eyelash Extension
$10.15 Car Mirror Interior Rearview Mirrors Universal Auto Rear View Mirror Anti-glare Wide-angle Surface Blue Mirror Auto Accessories
$46.09 Mens Overcoat Trench Coats Winter Male Pea Coats Double Breasted Wool & Blends Coat Brand Clothing W01
Replacement Battery for LT_MOBILE C800
$7.14 Personalized Private Party Cake Topper Custom Your Name Private Party Cake Decoration Topper
$118.34 Xcartoys 1:64 Ben-chi G63 Camera Rocker X2-01 Alloy Simulation Model Car
$19.5 RBL ICY DBS Blyth Doll Scalp Wigs Including The Hard Endoconch Dome OB24 ANIME GIRL
$9.75 Bandage/Sexy Bikini Swimsuit Push-up Swimsuit Brazil Sexy Bikini Ladies Two-piece Swimsuit Bikini Set
$2.73 10/30/50/100PCS Cool Fashion Brand Logo Stickers Aesthetic Skateboard Laptop Motorcycle Phone Car Graffiti Sticker Decal Kid Toy
$7.6 Natural Linen Gift Bags 5x7cm 7x9cm 9x12cm 50pcs/Lot Party Candy Jute Dust Sack Custom Logo Jewelry Pouch
$2.6 6pcs 10-28 mm golden gold metal buttons garment coat sewing accessories buttons for clothing crafts Black point oil button
$3.27 Electric Shock Penis Stimulator Ring Anal Sex Toys For Men Electric Shock Medical Themed Ring Toys Accessories Urethral Plug
$18.94 For Samsung Galaxy S23 Ultra Case 6.8“Slim Stylish Geometric Marble shockproof bumper Phone Case with Built-in Screen Protector
Cover Cases for LT_MOBILE C800
$118.34 Xcartoys 1:64 Ben-chi G63 Camera Rocker X2-01 Alloy Simulation Model Car
$19.5 RBL ICY DBS Blyth Doll Scalp Wigs Including The Hard Endoconch Dome OB24 ANIME GIRL
$9.75 Bandage/Sexy Bikini Swimsuit Push-up Swimsuit Brazil Sexy Bikini Ladies Two-piece Swimsuit Bikini Set
$7.14 Personalized Private Party Cake Topper Custom Your Name Private Party Cake Decoration Topper
$2.73 10/30/50/100PCS Cool Fashion Brand Logo Stickers Aesthetic Skateboard Laptop Motorcycle Phone Car Graffiti Sticker Decal Kid Toy
$7.6 Natural Linen Gift Bags 5x7cm 7x9cm 9x12cm 50pcs/Lot Party Candy Jute Dust Sack Custom Logo Jewelry Pouch
$2.6 6pcs 10-28 mm golden gold metal buttons garment coat sewing accessories buttons for clothing crafts Black point oil button
$18.94 For Samsung Galaxy S23 Ultra Case 6.8“Slim Stylish Geometric Marble shockproof bumper Phone Case with Built-in Screen Protector
Find Similar devices | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |