1. Install SpecDevice
2. Run and decode your specs
3. Get your link (read more...)
| General Specifications | |
|---|---|
| Manufacturer | samsung |
| Model | SGH-I317 |
| Firmware | 5.0.2; eng.azraelskiss.20150312.041538; SDK21 |
| CPU | 4 cores; ARMv7 Processor rev 0 (v7l) exynos4; Max: 1600.0 MHz; Min: 200.0 MHz |
| Display | 1280 x 720; DPI: 320; Evaluated Size: 4.6" |
| Touch screen | Multitouch 10 points |
| GPU | Mali-400 MP; ARM; OpenGL ES-CM 1.1; OpenGL ES 2.0 |
| RAM | 2048 MB (2044 MB available) |
| Flash | 16 GB (14.676 GB actual); 64 GB (59.479 GB actual) (see memory map tab) |
| Communications | |
| Phone | GSM; Net: LTE |
| WiFi | dhd; IEEE 802.11 b/g/n; Broadcom 4329/30; AP Mode |
| USB Host | Yes |
| Bluetooth | Bluetooth® 2.1 + EDR |
| GPS | Yes |
| Advanced Features | |
| Front camera | Photo: 8.0 MP; Max: 3264x2448; Video: 2.1 MP; Max: 1920x1080; Focus: auto infinity macro fixed continuous-picture continuous-video; Flash modes: off auto on torch |
| Back camera | Photo: 1.9 MP; Max size: 1392x1392; Video: 0.9 MP; Max: 1280x720; Focus: infinity fixed; No flash |
| Sensors | LSM330DLC Acceleration Sensor (STMicroelectronics); range: 0...19.613; resolution: 0.01 (0.05%); power: 0.23mA; |
| AK8963C Magnetic field Sensor (Asahi Kasei Microdevices); range: 0...2000; resolution: 0.062 (0.003%); power: 6.8mA; | |
| LSM330DLC Gyroscope Sensor (STMicroelectronics); range: 0...34.907; resolution: 0 (0.001%); power: 6.1mA; | |
| BMP182 Pressure sensor (Bosch); range: 0...1100; resolution: 0.01 (0.001%); power: 0.06mA; | |
| CM36651 Proximity Sensor (Capella Microsystems); range: 0...5; resolution: 5 (100%); power: 0.75mA; | |
| CM36651 Light Sensor (Capella Microsystems); range: 0...10240; resolution: 1 (0.01%); power: 0.75mA; | |
| Rotation Vector Sensor (AOSP); range: 0...1; resolution: 0 (0%); power: 13.13mA; | |
| Gravity Sensor (AOSP); range: 0...19.613; resolution: 0.01 (0.05%); power: 13.13mA; | |
| Linear Acceleration Sensor (AOSP); range: 0...19.613; resolution: 0.01 (0.05%); power: 13.13mA; | |
| Vibrator | Yes |
| Supported languages | 172; Afrikaans; Aghem; Akan; Amharic; Arabic; Assamese; Asu; Azerbaijani; Basaa; Belarusian; Bemba; Bena; Bulgarian; Bambara; Bengali; Tibetan; Breton; Bodo; Bosnian; Catalan; Chiga; Cherokee; Czech; Welsh; Danish; Taita; German; Zarma; Duala; Jola-Fonyi; Dzongkha; Embu; Ewe; Greek; English; Esperanto; Spanish; Estonian; Basque; Ewondo; Persian; Fulah; Finnish; Filipino; Faroese; French; Irish; Galician; Swiss German; Gujarati; Gusii; Manx; Hausa; Hawaiian; Hebrew; Hindi; Croatian; Hungarian; Armenian; Indonesian; Igbo; Sichuan Yi; Icelandic; Italian; Japanese; Ngomba; Machame; Georgian; Kabyle; Kamba; Makonde; Kabuverdianu; Koyra Chiini; Kikuyu; Kazakh; Kako; Kalaallisut; Kalenjin; Khmer; Kannada; Korean; Konkani; Kashmiri; Shambala; Bafia; Cornish; Kyrgyz; Langi; Ganda; Lakota; Lingala; Lao; Lithuanian; Luba-Katanga; Luo; Luyia; Latvian; Masai; Meru; Morisyen; Malagasy; Makhuwa-Meetto; Meta'; Macedonian; Malayalam; Mongolian; Marathi; Malay; Maltese; Mundang; Burmese; Nama; Norwegian; North Ndebele; Nepali; Dutch; Kwasio; Norwegian; Ngiemboon; Nuer; Nyankole; Oromo; Oriya; Punjabi; Polish; Pashto; Portuguese; Romansh; Rundi; Romanian; Rombo; Russian; Kinyarwanda; Rwa; Samburu; Sangu; Sena; Koyraboro Senni; Sango; Tachelhit; Sinhala; Slovak; Slovenian; Shona; Somali; Albanian; Serbian; Swedish; Swahili; Congo Swahili; Tamil; Telugu; Teso; Thai; Tigrinya; Tongan; Turkish; Tasawaq; Central Atlas Tamazight; Uyghur; Ukrainian; Urdu; Uzbek; Vai; Vietnamese; Vunjo; Soga; Yangben; Yoruba; Standard Moroccan Tamazight; Chinese; Zulu |
| Battery | Technology: Li-ion; Voltage: 3810 |
| FM radio | 76MHz to 108MHz |
| Owner's comment: | t0lteatt |
| SD Version: | 1.1 5 |
KERNEL: Linux version 3.0.64-UNICORNblood-ge526bd1 (azraelskiss@DARKdragon) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Thu Mar 12 04:58:08 EDT 2015
CODENAME: UNOFFICIAL
Mainboard: smdk4x12
BRAND: samsung
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: t0lteatt
DISPLAY: du_t0lteatt-userdebug 5.0.2 LRX22G eng.azraelskiss.20150312.041538 test-keys
FINGERPRINT: samsung/t0lteatt/t0lteatt:4.4.2/KOT49H/I317UCUCNE5:user/release-keys
HARDWARE: smdk4x12
ID: LRX22G
TAGS: test-keys
Processor : ARMv7 Processor rev 0 (v7l)
processor : 0
BogoMIPS : 1592.52
processor : 1
BogoMIPS : 995.32
processor : 2
BogoMIPS : 3185.04
processor : 3
BogoMIPS : 995.32
Features : swp half thumb fastmult vfp edsp neon vfpv3 tls
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc09
CPU revision : 0
Chip revision : 0020
Hardware : SMDK4x12
Revision : 000a
Serial : 08afaf9f42f73c1e
GL_EXT_debug_marker
GL_OES_texture_npot
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_standard_derivatives
GL_OES_EGL_image
GL_OES_depth24
GL_ARM_rgba8
GL_ARM_mali_shader_binary
GL_OES_depth_texture
GL_OES_packed_depth_stencil
GL_EXT_texture_format_BGRA8888
GL_EXT_blend_minmax
GL_OES_EGL_image_external
GL_OES_EGL_sync
GL_OES_rgb8_rgba8
GL_EXT_multisampled_render_to_texture
GL_EXT_discard_framebuffer
GL_OES_get_program_binary
GL_ARM_mali_program_binary
GL_EXT_shader_texture_lod
GL_EXT_robustness
GL_OES_depth_texture_cube_map
<7>[ 4385.480051] c1 hub 1-0:1.0: hub_resume
<7>[ 4385.480103] c1 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
<7>[ 4385.480152] c1 hub 1-0:1.0: port 2: status 0503 change 0004
<7>[ 4385.480212] c3 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000
<7>[ 4385.480244] c1 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
<6>[ 4385.480292] c1 mif: usb_port_resume: 1283, 4
<7>[ 4385.480317] c3 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
<7>[ 4385.480370] c1 usb 1-2: finish resume
<6>[ 4385.483213] c1 usb 1-2: read_hsic:
<7>[ 4385.483600] c1 s5p-ehci s5p-ehci: reused qh e51bd6c0 schedule
<7>[ 4385.483639] c1 usb 1-2: link qh8-0001/e51bd6c0 start 1 [2/0 us]
<6>[ 4385.483704] c1 [CHKRA:3]>
<7>[ 4385.483734] c1 s5p-ehci s5p-ehci: reused qh e51bd680 schedule
<7>[ 4385.483770] c1 usb 1-2: link qh8-0001/e51bd680 start 2 [2/0 us]
<6>[ 4385.483832] c1 [CHKRA:5]>
<7>[ 4385.483863] c1 s5p-ehci s5p-ehci: reused qh e51bd840 schedule
<7>[ 4385.483900] c1 usb 1-2: link qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4385.483960] c1 [CHKRA:6]>
<7>[ 4385.483993] c1 s5p-ehci s5p-ehci: reused qh eb3848c0 schedule
<7>[ 4385.484030] c1 usb 1-2: link qh8-0001/eb3848c0 start 4 [2/0 us]
<6>[ 4385.484081] c1 [CHKRA:7]>
<7>[ 4385.484111] c1 s5p-ehci s5p-ehci: reused qh eb1cf800 schedule
<7>[ 4385.484144] c1 usb 1-2: link qh8-0001/eb1cf800 start 5 [2/0 us]
<6>[ 4385.484191] c1 [CHKRA:8]>
<6>[ 4385.488552] c0 [NACB:6]<
<6>[ 4385.488613] c0 [NRA:6]>
<7>[ 4385.488670] c0 usb 1-2: unlink qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4385.490155] c0 [RACB:6]<
<7>[ 4385.490212] c0 s5p-ehci s5p-ehci: reused qh e51bd840 schedule
<7>[ 4385.490253] c0 usb 1-2: link qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4385.490313] c0 [CHKRA:6]>
<6>[ 4385.490374] c0 Read: 01 15 00 80 03 01 04 00 00 51 00 09 00 14 06 00
<6>[ 4385.491364] c3 Write: 01 0c 00 00 03 01 00 e7 03 4f 00 00 00
<6>[ 4385.504551] c0 [NACB:6]<
<6>[ 4385.504592] c0 [NRA:6]>
<7>[ 4385.504642] c0 usb 1-2: unlink qh8-0001/e51bd840 start 3 [2/0 us]
<7>[ 4385.505069] c3 hub 1-0:1.0: resume on port 2, status 0
<7>[ 4385.505107] c3 hub 1-0:1.0: port 2, status 0503, change 0004, 480 Mb/s
<6>[ 4385.507048] c0 [RACB:6]<
<7>[ 4385.507104] c0 s5p-ehci s5p-ehci: reused qh e51bd840 schedule
<7>[ 4385.507146] c0 usb 1-2: link qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4385.507206] c0 [CHKRA:6]>
<6>[ 4385.507276] c0 Read: 01 21 00 80 03 01 02 e7 03 4f 00 15 00 02 04 00
<7>[ 4386.005195] c1 usb 1-2: unlink qh8-0001/eb1cf800 start 5 [2/0 us]
<7>[ 4386.005371] c1 usb 1-2: unlink qh8-0001/eb3848c0 start 4 [2/0 us]
<7>[ 4386.005549] c1 usb 1-2: unlink qh8-0001/e51bd840 start 3 [2/0 us]
<7>[ 4386.021293] c1 usb 1-2: unlink qh8-0001/e51bd680 start 2 [2/0 us]
<7>[ 4386.030772] c1 usb 1-2: unlink qh8-0001/e51bd6c0 start 1 [2/0 us]
<6>[ 4386.031705] c0 read_hsic_cb: status:-2 actual:0
<7>[ 4386.032813] c1 usb 1-2: usb auto-suspend
<7>[ 4386.045102] c1 hub 1-0:1.0: hub_suspend
<7>[ 4386.045151] c1 usb usb1: bus auto-suspend
<7>[ 4386.045190] c1 s5p-ehci s5p-ehci: suspend root hub
<6>[ 4386.045584] c1 s5p-ehci s5p-ehci: host_phy_susp:4
<6>[ 4386.045632] c1 request_active_lock_release
<6>[ 4386.916131] c3 Write: 01 10 00 00 01 05 00 e7 0a 2a 00 04 00 10 01 00
<6>[ 4386.916199] c3 request_active_lock_set
<7>[ 4386.916330] c3 usb usb1: usb auto-resume
<7>[ 4386.916364] c3 s5p-ehci s5p-ehci: resume root hub
<7>[ 4386.970133] c1 hub 1-0:1.0: hub_resume
<7>[ 4386.970189] c1 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
<7>[ 4386.970251] c1 hub 1-0:1.0: port 2: status 0503 change 0004
<7>[ 4386.970319] c1 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
<6>[ 4386.970375] c1 mif: usb_port_resume: 1283, 4
<7>[ 4386.970410] c1 usb 1-2: finish resume
<7>[ 4386.970700] c3 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000
<7>[ 4386.970749] c3 hub 1-0:1.0: port 2, status 0503, change 0000, 480 Mb/s
<6>[ 4386.973306] c1 usb 1-2: read_hsic:
<7>[ 4386.973763] c1 s5p-ehci s5p-ehci: reused qh e51bd6c0 schedule
<7>[ 4386.973800] c1 usb 1-2: link qh8-0001/e51bd6c0 start 1 [2/0 us]
<6>[ 4386.973852] c1 [CHKRA:3]>
<7>[ 4386.973889] c1 s5p-ehci s5p-ehci: reused qh e51bd680 schedule
<7>[ 4386.973929] c1 usb 1-2: link qh8-0001/e51bd680 start 2 [2/0 us]
<6>[ 4386.973992] c1 [CHKRA:5]>
<7>[ 4386.974022] c1 s5p-ehci s5p-ehci: reused qh e51bd840 schedule
<7>[ 4386.974060] c1 usb 1-2: link qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4386.974113] c1 [CHKRA:6]>
<7>[ 4386.974160] c1 s5p-ehci s5p-ehci: reused qh eb3848c0 schedule
<7>[ 4386.974201] c1 usb 1-2: link qh8-0001/eb3848c0 start 4 [2/0 us]
<6>[ 4386.974248] c1 [CHKRA:7]>
<7>[ 4386.974278] c1 s5p-ehci s5p-ehci: reused qh eb1cf800 schedule
<7>[ 4386.974311] c1 usb 1-2: link qh8-0001/eb1cf800 start 5 [2/0 us]
<6>[ 4386.974367] c1 [CHKRA:8]>
<6>[ 4386.983550] c0 [NACB:6]<
<6>[ 4386.983601] c0 [NRA:6]>
<7>[ 4386.983648] c0 usb 1-2: unlink qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4386.985349] c0 [RACB:6]<
<7>[ 4386.985398] c0 s5p-ehci s5p-ehci: reused qh e51bd840 schedule
<7>[ 4386.985439] c0 usb 1-2: link qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4386.985494] c0 [CHKRA:6]>
<6>[ 4386.985548] c0 Read: 01 26 00 80 01 05 02 e7 0a 2a 00 1a 00 02 04 00
<6>[ 4386.985893] c1 Write: 01 11 00 00 01 05 00 e8 0a 2b 00 05 00 01 02 00
<6>[ 4386.999567] c0 [NACB:6]<
<6>[ 4386.999622] c0 [NRA:6]>
<7>[ 4386.999682] c0 usb 1-2: unlink qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.001061] c0 [RACB:6]<
<7>[ 4387.001119] c0 s5p-ehci s5p-ehci: reused qh e51bd840 schedule
<7>[ 4387.001161] c0 usb 1-2: link qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.001223] c0 [CHKRA:6]>
<6>[ 4387.001290] c2 Read: 01 b5 00 80 01 05 02 e8 0a 2b 00 a9 00 02 04 00
<6>[ 4387.001727] c1 Write: 01 2c 00 00 01 05 00 e9 0a 27 00 20 00 01 01 00
<6>[ 4387.015657] c0 [NACB:6]<
<6>[ 4387.015708] c0 [NRA:6]>
<7>[ 4387.015758] c0 usb 1-2: unlink qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.016940] c0 [RACB:6]<
<7>[ 4387.016996] c0 s5p-ehci s5p-ehci: reused qh e51bd840 schedule
<7>[ 4387.017034] c0 usb 1-2: link qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.017095] c0 [CHKRA:6]>
<6>[ 4387.017168] c0 Read: 01 18 00 80 01 05 02 e9 0a 27 00 0c 00 02 04 00
<6>[ 4387.017553] c1 Write: 01 10 00 00 01 05 00 ea 0a 2a 00 04 00 10 01 00
<6>[ 4387.031558] c0 [NACB:6]<
<6>[ 4387.031607] c0 [NRA:6]>
<7>[ 4387.031655] c0 usb 1-2: unlink qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.033047] c0 [RACB:6]<
<7>[ 4387.033084] c0 s5p-ehci s5p-ehci: reused qh e51bd840 schedule
<7>[ 4387.033111] c0 usb 1-2: link qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.033154] c0 [CHKRA:6]>
<6>[ 4387.033210] c0 Read: 01 2f 00 80 01 05 02 ea 0a 2a 00 23 00 02 04 00
<6>[ 4387.033518] c1 Write: 01 11 00 00 01 05 00 eb 0a 2b 00 05 00 01 02 00
<6>[ 4387.047553] c0 [NACB:6]<
<6>[ 4387.047605] c0 [NRA:6]>
<7>[ 4387.047650] c0 usb 1-2: unlink qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.049734] c0 [RACB:6]<
<7>[ 4387.049772] c0 s5p-ehci s5p-ehci: reused qh e51bd840 schedule
<7>[ 4387.049798] c0 usb 1-2: link qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.049839] c0 [CHKRA:6]>
<6>[ 4387.050124] c3 Read: 01 b2 00 80 01 05 02 eb 0a 2b 00 a6 00 02 04 00
<6>[ 4387.050609] c1 Write: 01 11 00 00 01 05 00 ec 0a 2b 00 05 00 01 02 00
<6>[ 4387.063641] c0 [NACB:6]<
<6>[ 4387.063679] c0 [NRA:6]>
<7>[ 4387.063721] c0 usb 1-2: unlink qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.065170] c0 [RACB:6]<
<7>[ 4387.065205] c0 s5p-ehci s5p-ehci: reused qh e51bd840 schedule
<7>[ 4387.065234] c0 usb 1-2: link qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.065275] c0 [CHKRA:6]>
<6>[ 4387.065325] c0 Read: 01 b2 00 80 01 05 02 ec 0a 2b 00 a6 00 02 04 00
<6>[ 4387.065717] c1 Write: 01 11 00 00 01 05 00 ed 0a 2b 00 05 00 01 02 00
<6>[ 4387.079559] c0 [NACB:6]<
<6>[ 4387.079608] c0 [NRA:6]>
<7>[ 4387.079652] c0 usb 1-2: unlink qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.081056] c0 [RACB:6]<
<7>[ 4387.081103] c0 s5p-ehci s5p-ehci: reused qh e51bd840 schedule
<7>[ 4387.081138] c0 usb 1-2: link qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.081185] c0 [CHKRA:6]>
<6>[ 4387.081228] c0 Read: 01 b2 00 80 01 05 02 ed 0a 2b 00 a6 00 02 04 00
<6>[ 4387.081700] c1 Write: 01 11 00 00 01 05 00 ee 0a 2b 00 05 00 01 02 00
<6>[ 4387.095560] c0 [NACB:6]<
<6>[ 4387.095608] c0 [NRA:6]>
<7>[ 4387.095655] c0 usb 1-2: unlink qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.097174] c0 [RACB:6]<
<7>[ 4387.097218] c0 s5p-ehci s5p-ehci: reused qh e51bd840 schedule
<7>[ 4387.097255] c0 usb 1-2: link qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.097301] c0 [CHKRA:6]>
<6>[ 4387.097354] c0 Read: 01 b2 00 80 01 05 02 ee 0a 2b 00 a6 00 02 04 00
<6>[ 4387.097797] c1 Write: 01 11 00 00 01 05 00 ef 0a 2b 00 05 00 01 02 00
<6>[ 4387.111580] c0 [NACB:6]<
<6>[ 4387.111650] c0 [NRA:6]>
<7>[ 4387.111713] c0 usb 1-2: unlink qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.113171] c0 [RACB:6]<
<7>[ 4387.113214] c0 s5p-ehci s5p-ehci: reused qh e51bd840 schedule
<7>[ 4387.113249] c0 usb 1-2: link qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.113295] c0 [CHKRA:6]>
<6>[ 4387.113349] c0 Read: 01 b2 00 80 01 05 02 ef 0a 2b 00 a6 00 02 04 00
<6>[ 4387.113866] c1 Write: 01 11 00 00 01 05 00 f0 0a 2b 00 05 00 01 02 00
<6>[ 4387.135565] c0 [NACB:6]<
<6>[ 4387.135611] c0 [NRA:6]>
<7>[ 4387.135662] c0 usb 1-2: unlink qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.137070] c0 [RACB:6]<
<7>[ 4387.137132] c0 s5p-ehci s5p-ehci: reused qh e51bd840 schedule
<7>[ 4387.137178] c0 usb 1-2: link qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.137219] c3 Read: 01 b2 00 80 01 05 02 f0 0a 2b 00 a6 00 02 04 00
<6>[ 4387.137288] c0 [CHKRA:6]>
<6>[ 4387.137843] c1 Write: 01 11 00 00 01 05 00 f1 0a 2b 00 05 00 01 02 00
<6>[ 4387.151564] c0 [NACB:6]<
<6>[ 4387.151606] c0 [NRA:6]>
<7>[ 4387.151651] c0 usb 1-2: unlink qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.153189] c0 [RACB:6]<
<7>[ 4387.153234] c0 s5p-ehci s5p-ehci: reused qh e51bd840 schedule
<6>[ 4387.153267] c3 Read: 01 b2 00 80 01 05 02 f1 0a 2b 00 a6 00 02 04 00
<7>[ 4387.153307] c0 usb 1-2: link qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.153355] c0 [CHKRA:6]>
<6>[ 4387.153875] c1 Write: 01 11 00 00 01 05 00 f2 0a 2b 00 05 00 01 02 00
<6>[ 4387.167957] c0 [NACB:6]<
<6>[ 4387.167998] c0 [NRA:6]>
<7>[ 4387.168045] c0 usb 1-2: unlink qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.169335] c0 [RACB:6]<
<7>[ 4387.169399] c0 s5p-ehci s5p-ehci: reused qh e51bd840 schedule
<7>[ 4387.169440] c0 usb 1-2: link qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.169500] c0 [CHKRA:6]>
<6>[ 4387.169567] c0 Read: 01 b2 00 80 01 05 02 f2 0a 2b 00 a6 00 02 04 00
<6>[ 4387.170200] c1 Write: 01 1e 00 00 01 05 00 f3 0a 27 00 12 00 01 01 00
<6>[ 4387.183556] c0 [NACB:6]<
<6>[ 4387.183597] c0 [NRA:6]>
<7>[ 4387.183642] c0 usb 1-2: unlink qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.184919] c0 [RACB:6]<
<7>[ 4387.184958] c0 s5p-ehci s5p-ehci: reused qh e51bd840 schedule
<7>[ 4387.184987] c0 usb 1-2: link qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.185046] c0 [CHKRA:6]>
<6>[ 4387.185104] c0 Read: 01 18 00 80 01 05 02 f3 0a 27 00 0c 00 02 04 00
<6>[ 4387.186605] c1 Write: 01 20 00 00 01 02 00 d1 05 f2 ff 14 00 01 01 00
<6>[ 4387.199558] c0 [NACB:6]<
<6>[ 4387.199602] c0 [NRA:6]>
<7>[ 4387.199651] c0 usb 1-2: unlink qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.201058] c0 [RACB:6]<
<7>[ 4387.201104] c0 s5p-ehci s5p-ehci: reused qh e51bd840 schedule
<7>[ 4387.201136] c0 usb 1-2: link qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.201188] c0 [CHKRA:6]>
<6>[ 4387.201238] c0 Read: 01 28 00 80 01 02 02 d1 05 f2 ff 1c 00 02 04 00
<6>[ 4387.201678] c1 Write: 01 0c 00 00 01 02 00 d2 05 22 00 00 00
<6>[ 4387.215561] c0 [NACB:6]<
<6>[ 4387.215605] c0 [NRA:6]>
<7>[ 4387.215650] c0 usb 1-2: unlink qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.216922] c0 [RACB:6]<
<7>[ 4387.216961] c0 s5p-ehci s5p-ehci: reused qh e51bd840 schedule
<7>[ 4387.216989] c0 usb 1-2: link qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.217032] c0 [CHKRA:6]>
<6>[ 4387.217078] c0 Read: 01 17 00 80 01 02 02 d2 05 22 00 0b 00 02 04 00
<6>[ 4387.217577] c1 Write: 01 10 00 00 01 02 00 d3 05 4d 00 04 00 01 01 00
<6>[ 4387.231573] c0 [NACB:6]<
<6>[ 4387.231623] c0 [NRA:6]>
<7>[ 4387.231667] c0 usb 1-2: unlink qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.232795] c0 [RACB:6]<
<7>[ 4387.232832] c0 s5p-ehci s5p-ehci: reused qh e51bd840 schedule
<7>[ 4387.232861] c0 usb 1-2: link qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.232902] c0 [CHKRA:6]>
<6>[ 4387.232943] c0 Read: 01 13 00 80 01 02 02 d3 05 4d 00 07 00 02 04 00
<6>[ 4387.233482] c0 Write: 01 1c 00 00 01 02 00 d4 05 20 00 10 00 31 01 00
<6>[ 4387.655555] c0 [NACB:6]<
<6>[ 4387.655600] c0 [NRA:6]>
<7>[ 4387.655650] c0 usb 1-2: unlink qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.656807] c0 [RACB:6]<
<7>[ 4387.656846] c0 s5p-ehci s5p-ehci: reused qh e51bd840 schedule
<7>[ 4387.656878] c0 usb 1-2: link qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.656932] c0 [CHKRA:6]>
<6>[ 4387.656977] c0 Read: 01 1a 00 80 01 02 02 d4 05 20 00 0e 00 02 04 00
<6>[ 4387.663570] c0 [NACB:6]<
<6>[ 4387.663613] c0 [NRA:6]>
<7>[ 4387.663657] c0 usb 1-2: unlink qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.664804] c0 [RACB:6]<
<7>[ 4387.664858] c0 s5p-ehci s5p-ehci: reused qh e51bd840 schedule
<7>[ 4387.664888] c0 usb 1-2: link qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.664930] c0 [CHKRA:6]>
<6>[ 4387.664984] c0 Read: 01 15 00 80 01 04 04 00 00 01 00 09 00 22 02 00
<6>[ 4387.671562] c0 [NACB:6]<
<6>[ 4387.671634] c0 [NRA:6]>
<7>[ 4387.671700] c0 usb 1-2: unlink qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.672928] c0 [RACB:6]<
<7>[ 4387.672982] c0 s5p-ehci s5p-ehci: reused qh e51bd840 schedule
<7>[ 4387.673012] c0 usb 1-2: link qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.673056] c0 [CHKRA:6]>
<6>[ 4387.673111] c0 Read: 01 15 00 80 01 ff 04 00 00 22 00 09 00 01 02 00
<6>[ 4387.673719] c2 Write: 01 10 00 00 01 01 00 2f 02 4d 00 04 00 01 01 00
<6>[ 4387.679557] c0 [NACB:6]<
<6>[ 4387.679596] c0 [NRA:6]>
<7>[ 4387.679639] c0 usb 1-2: unlink qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.680926] c0 [RACB:6]<
<7>[ 4387.680968] c0 s5p-ehci s5p-ehci: reused qh e51bd840 schedule
<7>[ 4387.680997] c0 usb 1-2: link qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.681038] c0 [CHKRA:6]>
<6>[ 4387.681086] c0 Read: 01 13 00 80 01 01 02 2f 02 4d 00 07 00 02 04 00
<6>[ 4387.681369] c2 Write: 01 13 00 00 01 01 00 30 02 2d 00 07 00 10 04 00
<6>[ 4387.687570] c0 [NACB:6]<
<6>[ 4387.687631] c0 [NRA:6]>
<7>[ 4387.687682] c0 usb 1-2: unlink qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.688929] c0 [RACB:6]<
<7>[ 4387.688975] c0 s5p-ehci s5p-ehci: reused qh e51bd840 schedule
<7>[ 4387.689007] c0 usb 1-2: link qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.689053] c0 [CHKRA:6]>
<6>[ 4387.689102] c0 Read: 01 41 00 80 01 01 02 30 02 2d 00 35 00 02 04 00
<6>[ 4387.689442] c2 Write: 01 10 00 00 01 01 00 31 02 4d 00 04 00 01 01 00
<6>[ 4387.695561] c0 [NACB:6]<
<6>[ 4387.695614] c0 [NRA:6]>
<7>[ 4387.695664] c0 usb 1-2: unlink qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.696933] c0 [RACB:6]<
<7>[ 4387.696972] c0 s5p-ehci s5p-ehci: reused qh e51bd840 schedule
<7>[ 4387.697003] c0 usb 1-2: link qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.697059] c0 [CHKRA:6]>
<6>[ 4387.697103] c0 Read: 01 13 00 80 01 01 02 31 02 4d 00 07 00 02 04 00
<6>[ 4387.877215] c3 Write: 01 13 00 00 01 02 00 d5 05 2d 00 07 00 10 04 00
<6>[ 4387.887657] c0 [NACB:6]<
<6>[ 4387.887707] c0 [NRA:6]>
<7>[ 4387.887750] c0 usb 1-2: unlink qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.889418] c0 [RACB:6]<
<7>[ 4387.889454] c0 s5p-ehci s5p-ehci: reused qh e51bd840 schedule
<7>[ 4387.889484] c0 usb 1-2: link qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.889529] c0 [CHKRA:6]>
<6>[ 4387.889585] c0 Read: 01 33 00 80 01 02 02 d5 05 2d 00 27 00 02 04 00
<6>[ 4387.890445] c3 Write: 01 13 00 00 01 02 00 d6 05 2d 00 07 00 10 04 00
<6>[ 4387.903552] c0 [NACB:6]<
<6>[ 4387.903597] c0 [NRA:6]>
<7>[ 4387.903641] c0 usb 1-2: unlink qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.905360] c0 [RACB:6]<
<7>[ 4387.905394] c0 s5p-ehci s5p-ehci: reused qh e51bd840 schedule
<7>[ 4387.905423] c0 usb 1-2: link qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.905463] c0 [CHKRA:6]>
<6>[ 4387.905529] c0 Read: 01 33 00 80 01 02 02 d6 05 2d 00 27 00 02 04 00
<6>[ 4387.906594] c3 Write: 01 0f 00 00 00 00 00 a4 22 00 04 00 01 01 00 01
<6>[ 4387.919555] c0 [NACB:6]<
<6>[ 4387.919603] c0 [NRA:6]>
<7>[ 4387.919646] c0 usb 1-2: unlink qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.920926] c0 [RACB:6]<
<7>[ 4387.920962] c0 s5p-ehci s5p-ehci: reused qh e51bd840 schedule
<7>[ 4387.920992] c0 usb 1-2: link qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.921035] c0 [CHKRA:6]>
<6>[ 4387.921081] c0 Read: 01 17 00 80 00 00 01 a4 22 00 0c 00 02 04 00 00
<6>[ 4387.921668] c3 Write: 01 0c 00 00 01 c2 00 01 00 44 00 00 00
<6>[ 4387.935573] c0 [NACB:6]<
<6>[ 4387.935637] c0 [NRA:6]>
<7>[ 4387.935693] c0 usb 1-2: unlink qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.936980] c0 [RACB:6]<
<7>[ 4387.937017] c0 s5p-ehci s5p-ehci: reused qh e51bd840 schedule
<7>[ 4387.937046] c0 usb 1-2: link qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.937087] c0 [CHKRA:6]>
<6>[ 4387.937580] c0 Read: 01 1f 00 80 01 c2 02 01 00 44 00 13 00 02 04 00
<6>[ 4387.938377] c3 Write: 01 10 00 00 01 c2 00 02 00 01 00 04 00 13 01 00
<6>[ 4387.943839] c0 [NACB:6]<
<6>[ 4387.943902] c0 [NRA:6]>
<7>[ 4387.943978] c0 usb 1-2: unlink qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.945564] c0 [RACB:6]<
<7>[ 4387.945613] c0 s5p-ehci s5p-ehci: reused qh e51bd840 schedule
<7>[ 4387.945649] c0 usb 1-2: link qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.945702] c0 [CHKRA:6]>
<6>[ 4387.945758] c0 Read: 01 13 00 80 01 c2 02 02 00 01 00 07 00 02 04 00
<6>[ 4387.946165] c3 Write: 01 0c 00 00 01 c2 00 03 00 30 00 00 00
<6>[ 4387.951561] c0 [NACB:6]<
<6>[ 4387.951606] c0 [NRA:6]>
<7>[ 4387.951657] c0 usb 1-2: unlink qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.952825] c0 [RACB:6]<
<7>[ 4387.952888] c0 s5p-ehci s5p-ehci: reused qh e51bd840 schedule
<7>[ 4387.952930] c0 usb 1-2: link qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4387.952999] c0 [CHKRA:6]>
<6>[ 4387.953063] c0 Read: 01 17 00 80 01 c2 02 03 00 30 00 0b 00 02 04 00
<4>[ 4387.976512] c3 type=1325 audit(1427060325.214:1011): table=mangle family=2 entries=17
<4>[ 4387.985265] c3 type=1325 audit(1427060325.224:1012): table=mangle family=10 entries=13
<6>[ 4388.016648] c0 Write: 01 0c 00 00 03 01 00 e8 03 43 00 00 00
<6>[ 4388.023564] c0 [NACB:6]<
<6>[ 4388.023613] c0 [NRA:6]>
<7>[ 4388.023668] c0 usb 1-2: unlink qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4388.024937] c0 [RACB:6]<
<7>[ 4388.024978] c0 s5p-ehci s5p-ehci: reused qh e51bd840 schedule
<7>[ 4388.025009] c0 usb 1-2: link qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4388.025059] c0 [CHKRA:6]>
<6>[ 4388.025207] c0 Read: 01 4c 00 80 03 01 02 e8 03 43 00 40 00 02 04 00
<4>[ 4388.051108] c3 type=1325 audit(1427060325.289:1013): table=filter family=2 entries=48
<4>[ 4388.058700] c3 type=1325 audit(1427060325.294:1014): table=filter family=10 entries=45
<4>[ 4388.064741] c3 type=1325 audit(1427060325.299:1015): table=filter family=2 entries=50
<4>[ 4388.077234] c3 type=1325 audit(1427060325.314:1016): table=filter family=10 entries=47
<4>[ 4388.105610] c3 type=1325 audit(1427060325.344:1017): table=filter family=2 entries=51
<4>[ 4388.117545] c3 type=1325 audit(1427060325.354:1018): table=filter family=10 entries=48
<4>[ 4388.146691] c3 type=1325 audit(1427060325.384:1019): table=filter family=2 entries=52
<4>[ 4388.160139] c3 type=1325 audit(1427060325.394:1020): table=filter family=10 entries=49
<4>[ 4388.172775] c3 type=1325 audit(1427060325.409:1021): table=filter family=2 entries=53
<4>[ 4388.183770] c3 type=1325 audit(1427060325.419:1022): table=filter family=10 entries=50
<7>[ 4388.855167] c0 usb 1-2: unlink qh8-0001/eb1cf800 start 5 [2/0 us]
<7>[ 4388.855312] c0 usb 1-2: unlink qh8-0001/eb3848c0 start 4 [2/0 us]
<7>[ 4388.855551] c0 usb 1-2: unlink qh8-0001/e51bd840 start 3 [2/0 us]
<7>[ 4388.874905] c0 usb 1-2: unlink qh8-0001/e51bd680 start 2 [2/0 us]
<7>[ 4388.882140] c0 usb 1-2: unlink qh8-0001/e51bd6c0 start 1 [2/0 us]
<6>[ 4388.882870] c0 read_hsic_cb: status:-2 actual:0
<7>[ 4388.884109] c0 usb 1-2: usb auto-suspend
<7>[ 4388.895104] c0 hub 1-0:1.0: hub_suspend
<7>[ 4388.895156] c0 usb usb1: bus auto-suspend
<7>[ 4388.895187] c0 s5p-ehci s5p-ehci: suspend root hub
<6>[ 4388.895579] c0 s5p-ehci s5p-ehci: host_phy_susp:4
<6>[ 4388.895613] c0 request_active_lock_release
<3>[ 4389.005507] c1 init: Warning! Service at_distributor needs a SELinux domain defined; please fix!
<6>[ 4389.040584] c2 [SSP]: debug_work_func(1099) - Sensor state: 0xef, RC: 0, MS: 0
<6>[ 4389.040623] c2 0 : 133, 972, -162 (10ms)
<6>[ 4389.040647] c2 6 : 0, 0, 0, 0 (200ms)
<6>[ 4389.282556] c1 request_active_lock_set
<7>[ 4389.282678] c1 usb usb1: usb auto-resume
<7>[ 4389.282708] c1 s5p-ehci s5p-ehci: resume root hub
<7>[ 4389.335047] c1 hub 1-0:1.0: hub_resume
<7>[ 4389.335092] c1 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
<7>[ 4389.335136] c1 hub 1-0:1.0: port 2: status 0503 change 0004
<7>[ 4389.335193] c3 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000
<7>[ 4389.335221] c1 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
<6>[ 4389.335263] c1 mif: usb_port_resume: 1283, 4
<7>[ 4389.335286] c3 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
<7>[ 4389.335333] c1 usb 1-2: finish resume
<6>[ 4389.339383] c1 usb 1-2: read_hsic:
<7>[ 4389.339724] c1 s5p-ehci s5p-ehci: reused qh e51bd6c0 schedule
<7>[ 4389.339756] c1 usb 1-2: link qh8-0001/e51bd6c0 start 1 [2/0 us]
<6>[ 4389.339804] c1 [CHKRA:3]>
<7>[ 4389.339831] c1 s5p-ehci s5p-ehci: reused qh e51bd680 schedule
<7>[ 4389.339860] c1 usb 1-2: link qh8-0001/e51bd680 start 2 [2/0 us]
<6>[ 4389.339902] c1 [CHKRA:5]>
<7>[ 4389.339939] c1 s5p-ehci s5p-ehci: reused qh e51bd840 schedule
<7>[ 4389.339968] c1 usb 1-2: link qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4389.340923] c1 [CHKRA:6]>
<7>[ 4389.340952] c1 s5p-ehci s5p-ehci: reused qh eb3848c0 schedule
<7>[ 4389.340980] c1 usb 1-2: link qh8-0001/eb3848c0 start 4 [2/0 us]
<6>[ 4389.341020] c1 [CHKRA:7]>
<7>[ 4389.341044] c1 s5p-ehci s5p-ehci: reused qh eb1cf800 schedule
<7>[ 4389.341072] c1 usb 1-2: link qh8-0001/eb1cf800 start 5 [2/0 us]
<6>[ 4389.341112] c1 [CHKRA:8]>
<7>[ 4389.360051] c3 hub 1-0:1.0: resume on port 2, status 0
<7>[ 4389.360082] c3 hub 1-0:1.0: port 2, status 0503, change 0004, 480 Mb/s
<4>[ 4390.251920] c2 dhdsdio_disconnect : no mutex held. set lock
<6>[ 4390.265540] c0 wake disabled for irq 373
<4>[ 4390.265656] c3 dhdsdio_dpc: failed backplane access over SDIO, halting operation
<4>[ 4390.265737] c0 dhd_detach thr:bc8 terminated OK
<4>[ 4390.420104] c3 dhd_detach thr:bc4 terminated OK
<4>[ 4390.420160] c3 dhd_detach thr:bc7 terminated OK
<6>[ 4390.485122] c0 CFG80211-INFO2) wl_event_handler : was terminated
<4>[ 4390.485165] c1 wl_destroy_event_handler thr:bbc terminated OK
<4>[ 4390.510908] c1 wd wakelock count:0
<4>[ 4390.511031] c1 can`t alloc section 7
<4>[ 4390.511058] c1 dhdsdio_disconnect : the lock is released.
<4>[ 4390.511531] c1 ## wifi_remove
<4>[ 4390.511555] c1 wifi_set_power = 0
<4>[ 4390.511578] c1 ------------------------------------------------------------------------------------------------
<4>[ 4390.511635] c1 brcm_wlan_power Enter: power off
<6>[ 4390.511662] c1 111brcm_wlan_power Enter: power off
<4>[ 4390.511692] c1 gpio_table = [2]
<7>[ 4390.511719] c1 WLAN: GPIO_WLAN_EN = 0
<4>[ 4390.615135] c2 wifi_set_carddetect = 0
<4>[ 4390.615166] c2 gpio_table = [6]
<6>[ 4390.615401] c2 mmc2: card inserted.
<6>[ 4390.815104] c0 mmc2: cmd 7 command timeout error
<6>[ 4390.815142] c0 mmc2: cmd 7 command timeout error
<6>[ 4390.815171] c0 mmc2: cmd 7 command timeout error
<6>[ 4390.815201] c0 mmc2: cmd 7 command timeout error
<6>[ 4390.815712] c2 mmc2: card 0001 removed
<6>[ 4390.845347] c0 mmc2: cmd 52 command timeout error
<6>[ 4390.845684] c0 mmc2: cmd 52 command timeout error
<6>[ 4390.853386] c0 mmc2: cmd 8 command timeout error
<6>[ 4390.853731] c0 mmc2: cmd 5 command timeout error
<6>[ 4390.854051] c0 mmc2: cmd 5 command timeout error
<6>[ 4390.854372] c0 mmc2: cmd 5 command timeout error
<6>[ 4390.854701] c0 mmc2: cmd 5 command timeout error
<6>[ 4390.855102] c0 mmc2: cmd 55 command timeout error
<6>[ 4390.856439] c0 mmc2: cmd 55 command timeout error
<6>[ 4390.856786] c0 mmc2: cmd 55 command timeout error
<6>[ 4390.857118] c0 mmc2: cmd 55 command timeout error
<6>[ 4390.857585] c0 mmc2: cmd 1 command timeout error
<7>[ 4391.110093] c1 usb 1-2: unlink qh8-0001/eb1cf800 start 5 [2/0 us]
<7>[ 4391.110218] c1 usb 1-2: unlink qh8-0001/eb3848c0 start 4 [2/0 us]
<7>[ 4391.110425] c1 usb 1-2: unlink qh8-0001/e51bd840 start 3 [2/0 us]
<7>[ 4391.117574] c1 usb 1-2: unlink qh8-0001/e51bd680 start 2 [2/0 us]
<7>[ 4391.124588] c1 usb 1-2: unlink qh8-0001/e51bd6c0 start 1 [2/0 us]
<6>[ 4391.125312] c0 read_hsic_cb: status:-2 actual:0
<7>[ 4391.126415] c1 usb 1-2: usb auto-suspend
<7>[ 4391.140070] c1 hub 1-0:1.0: hub_suspend
<7>[ 4391.140107] c1 usb usb1: bus auto-suspend
<7>[ 4391.140130] c1 s5p-ehci s5p-ehci: suspend root hub
<6>[ 4391.140907] c1 s5p-ehci s5p-ehci: host_phy_susp:4
<6>[ 4391.140936] c1 request_active_lock_release
<4>[ 4391.199486] c3 wifi_set_power = 1
<4>[ 4391.199511] c3 ------------------------------------------------------------------------------------------------
<4>[ 4391.199571] c3 brcm_wlan_power Enter: power on
<6>[ 4391.199599] c3 111brcm_wlan_power Enter: power on
<4>[ 4391.199624] c3 gpio_table = [2]
<7>[ 4391.199852] c3 WLAN: GPIO_WLAN_EN = 1
<6>[ 4391.369444] c0 mdm_hsic_irq_handler: detect Rising edge
<6>[ 4391.369490] c3 mdm_hsic_rpm_check
<6>[ 4391.369517] c3 request_active_lock_set
<7>[ 4391.369631] c3 usb usb1: usb auto-resume
<7>[ 4391.369654] c3 s5p-ehci s5p-ehci: resume root hub
<4>[ 4391.400068] c3 wifi_set_carddetect = 1
<4>[ 4391.400094] c3 gpio_table = [6]
<6>[ 4391.400325] c3 mmc2: card inserted.
<6>[ 4391.405814] c0 mdm_hsic_irq_handler: detect Falling edge
<7>[ 4391.420103] c3 hub 1-0:1.0: hub_resume
<7>[ 4391.420159] c3 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
<7>[ 4391.420206] c3 hub 1-0:1.0: port 2: status 0503 change 0004
<7>[ 4391.420266] c3 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
<6>[ 4391.420312] c3 mif: usb_port_resume: 1283, 4
<7>[ 4391.420341] c3 usb 1-2: finish resume
<7>[ 4391.420394] c3 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000
<7>[ 4391.420435] c3 hub 1-0:1.0: port 2, status 0503, change 0000, 480 Mb/s
<6>[ 4391.422591] c0 usb 1-2: read_hsic:
<7>[ 4391.422870] c0 s5p-ehci s5p-ehci: reused qh e51bd6c0 schedule
<7>[ 4391.422900] c0 usb 1-2: link qh8-0001/e51bd6c0 start 1 [2/0 us]
<6>[ 4391.422942] c0 [CHKRA:3]>
<7>[ 4391.422964] c0 s5p-ehci s5p-ehci: reused qh e51bd680 schedule
<7>[ 4391.422996] c0 usb 1-2: link qh8-0001/e51bd680 start 2 [2/0 us]
<6>[ 4391.423036] c0 [CHKRA:5]>
<7>[ 4391.423067] c0 s5p-ehci s5p-ehci: reused qh e51bd840 schedule
<7>[ 4391.423095] c0 usb 1-2: link qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4391.423136] c0 [CHKRA:6]>
<7>[ 4391.423158] c0 s5p-ehci s5p-ehci: reused qh eb3848c0 schedule
<7>[ 4391.423186] c0 usb 1-2: link qh8-0001/eb3848c0 start 4 [2/0 us]
<6>[ 4391.423231] c0 [CHKRA:7]>
<7>[ 4391.423251] c0 s5p-ehci s5p-ehci: reused qh eb1cf800 schedule
<7>[ 4391.423279] c0 usb 1-2: link qh8-0001/eb1cf800 start 5 [2/0 us]
<6>[ 4391.423318] c0 [CHKRA:8]>
<6>[ 4391.423823] c0 [NACB:6]<
<6>[ 4391.423857] c0 [NRA:6]>
<7>[ 4391.423899] c0 usb 1-2: unlink qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4391.425387] c0 [RACB:6]<
<7>[ 4391.425438] c0 s5p-ehci s5p-ehci: reused qh e51bd840 schedule
<7>[ 4391.425470] c0 usb 1-2: link qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4391.425518] c0 [CHKRA:6]>
<6>[ 4391.425551] c1 Read: 01 15 00 80 03 01 04 00 00 51 00 09 00 14 06 00
<6>[ 4391.426206] c1 Write: 01 0c 00 00 03 01 00 e9 03 4f 00 00 00
<6>[ 4391.439862] c0 [NACB:6]<
<6>[ 4391.439918] c0 [NRA:6]>
<7>[ 4391.439966] c0 usb 1-2: unlink qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4391.441647] c0 [RACB:6]<
<7>[ 4391.441685] c0 s5p-ehci s5p-ehci: reused qh e51bd840 schedule
<6>[ 4391.441713] c1 Read: 01 21 00 80 03 01 02 e9 03 4f 00 15 00 02 04 00
<7>[ 4391.441744] c0 usb 1-2: link qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4391.441789] c0 [CHKRA:6]>
<6>[ 4391.631122] c0 mmc2: cmd 52 command timeout error
<6>[ 4391.631458] c0 mmc2: cmd 52 command timeout error
<6>[ 4391.635034] c0 mmc2: cmd 8 command timeout error
<4>[ 4391.664273] c0 mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
<4>[ 4391.668392] c1 mmc2: queuing unknown CIS tuple 0x80 (6 bytes)
<6>[ 4391.770275] c0 mmc2: new high speed SDIO card at address 0001
<4>[ 4391.772223] c3 alloc static buf at eb200000!
<4>[ 4391.772552] c3 dhdsdio_probe : no mutex held. set lock
<4>[ 4391.772704] c0 F1 signature read @0x18000000=0x16034334
<4>[ 4391.777252] c0 DHD: dongle ram size is set to 524288(orig 524288) at 0x0
<4>[ 4391.777995] c0 CHIP VER = [0x3]
<4>[ 4391.778012] c0 ----- CHIP bcm4334_B2 -----
<4>[ 4391.778056] c0 can`t alloc section 7
<4>[ 4391.787782] c0 wl_create_event_handler thr:3d28 created
<6>[ 4391.787808] c1 CFG80211-INFO2) wl_event_handler : tsk Enter, tsk = 0xcdc825b8
<4>[ 4391.797096] c3 p2p0: P2P Interface Registered
<4>[ 4391.798036] c3 dhd_attach thr:3d2e created
<4>[ 4391.800120] c3 dhd_attach thr:3d2f created
<4>[ 4391.800615] c3 dhd_attach thr:3d30 created
<4>[ 4391.804282] c0 dhd_bus_start: nvram_type = [txt_semcosh]
<4>[ 4391.908569] c0 dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
<7>[ 4391.950465] c0 usb 1-2: unlink qh8-0001/eb1cf800 start 5 [2/0 us]
<7>[ 4391.950616] c0 usb 1-2: unlink qh8-0001/eb3848c0 start 4 [2/0 us]
<7>[ 4391.950834] c0 usb 1-2: unlink qh8-0001/e51bd840 start 3 [2/0 us]
<7>[ 4391.959245] c0 usb 1-2: unlink qh8-0001/e51bd680 start 2 [2/0 us]
<7>[ 4391.965893] c0 usb 1-2: unlink qh8-0001/e51bd6c0 start 1 [2/0 us]
<6>[ 4391.966629] c0 read_hsic_cb: status:-2 actual:0
<7>[ 4391.967738] c0 usb 1-2: usb auto-suspend
<7>[ 4391.980063] c0 hub 1-0:1.0: hub_suspend
<7>[ 4391.980113] c0 usb usb1: bus auto-suspend
<7>[ 4391.980143] c0 s5p-ehci s5p-ehci: suspend root hub
<6>[ 4391.980855] c0 s5p-ehci s5p-ehci: host_phy_susp:4
<6>[ 4391.980885] c0 request_active_lock_release
<4>[ 4392.141837] c0 dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
<6>[ 4392.142348] c0 wake enabled for irq 373
<4>[ 4392.144970] c2 dhd_wl_ioctl: WLC_GET_VAR: cisdump, ret = -23
<4>[ 4392.145045] c2 dhd_check_module_cid: CIS reading failed, err=-23
<4>[ 4392.157534] c2 Firmware up: op_mode=0x0015, Broadcom Dongle Host Driver mac=88:87:05
<4>[ 4392.161816] c2 dhd_wl_ioctl: WLC_SET_VAR: lpc, ret = -23
<4>[ 4392.161892] c2 dhd_preinit_ioctls Set lpc failed -23
<4>[ 4392.184297] c2 POWER_VAL = 1
<4>[ 4392.198609] c2 dhd_wl_ioctl: WLC_SET_VAR: ampdu_hostreorder, ret = -23
<4>[ 4392.200590] c0 Firmware version = wl0: Nov 7 2013 03:55:23 version 6.10.58.105 (B2 NCHO WAPI) FWID 01-b290d27a
<4>[ 4392.201068] c0 dhd_wlfc_init(): successfully disabled bdcv2 tlv signaling, 0
<4>[ 4392.202298] c2 dhd_wl_ioctl: WLC_GET_VAR: cisdump, ret = -23
<4>[ 4392.202335] c2 dhd_check_module_mac: Check module mac by legacy FW : 88:87:05
<4>[ 4392.210506] c2 [WIFI]Check Mac address in .mac.info
<4>[ 4392.215888] c2 Broadcom Dongle Host Driver: register interface [wlan0] MAC: 88:87:05
<4>[ 4392.215926] c2 dhdsdio_probe : the lock is released.
<4>[ 4392.216569] c2
<4>[ 4392.216579] c2 Dongle Host Driver, version 1.61.47 (r)
<4>[ 4392.216605] c2 Compiled in drivers/net/wireless/bcmdhd on Mar 12 2015 at 04:59:27
<6>[ 4392.321640] c0 sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=360
<4>[ 4392.998144] c0
<4>[ 4392.998156] c0 Dongle Host Driver, version 1.61.47 (r)
<4>[ 4392.998178] c0 Compiled in drivers/net/wireless/bcmdhd on Mar 12 2015 at 04:59:27
<6>[ 4393.009064] c0 CFG80211-INFO2) wl_cfg80211_attach_post : p2p0: p2p_dev_addr=8a:87:05
<4>[ 4393.059496] c2 dhd_rx_frame: net device is NOT registered yet. drop packet
<4>[ 4393.059678] c2 dhd_rx_frame: net device is NOT registered yet. drop packet
<4>[ 4393.065518] c2 dhd_rx_frame: net device is NOT registered yet. drop packet
<6>[ 4393.247750] c2 CFG80211-TRACE) __wl_cfg80211_scan : START SCAN
<6>[ 4393.360285] c2 request_active_lock_set
<7>[ 4393.360434] c2 usb usb1: usb auto-resume
<7>[ 4393.360471] c2 s5p-ehci s5p-ehci: resume root hub
<7>[ 4393.415057] c2 hub 1-0:1.0: hub_resume
<7>[ 4393.415099] c2 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
<7>[ 4393.415141] c2 hub 1-0:1.0: port 2: status 0503 change 0004
<7>[ 4393.415187] c3 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000
<7>[ 4393.415216] c2 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
<6>[ 4393.415260] c2 mif: usb_port_resume: 1283, 4
<7>[ 4393.415281] c3 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
<7>[ 4393.415326] c2 usb 1-2: finish resume
<6>[ 4393.418508] c2 usb 1-2: read_hsic:
<7>[ 4393.418855] c2 s5p-ehci s5p-ehci: reused qh e51bd6c0 schedule
<7>[ 4393.418887] c2 usb 1-2: link qh8-0001/e51bd6c0 start 1 [2/0 us]
<6>[ 4393.418940] c2 [CHKRA:3]>
<7>[ 4393.418970] c2 s5p-ehci s5p-ehci: reused qh e51bd680 schedule
<7>[ 4393.419004] c2 usb 1-2: link qh8-0001/e51bd680 start 2 [2/0 us]
<6>[ 4393.419050] c2 [CHKRA:5]>
<7>[ 4393.419095] c2 s5p-ehci s5p-ehci: reused qh e51bd840 schedule
<7>[ 4393.419126] c2 usb 1-2: link qh8-0001/e51bd840 start 3 [2/0 us]
<6>[ 4393.419166] c2 [CHKRA:6]>
<7>[ 4393.419193] c2 s5p-ehci s5p-ehci: reused qh eb3848c0 schedule
<7>[ 4393.419225] c2 usb 1-2: link qh8-0001/eb3848c0 start 4 [2/0 us]
<6>[ 4393.419269] c2 [CHKRA:7]>
<7>[ 4393.419295] c2 s5p-ehci s5p-ehci: reused qh eb1cf800 schedule
<7>[ 4393.419323] c2 usb 1-2: link qh8-0001/eb1cf800 start 5 [2/0 us]
<6>[ 4393.419370] c2 [CHKRA:8]>
<7>[ 4393.440123] c3 hub 1-0:1.0: resume on port 2, status 0
<7>[ 4393.440162] c3 hub 1-0:1.0: port 2, status 0503, change 0004, 480 Mb/s
<7>[ 4393.920087] c2 usb 1-2: unlink qh8-0001/eb1cf800 start 5 [2/0 us]
<7>[ 4393.920228] c2 usb 1-2: unlink qh8-0001/eb3848c0 start 4 [2/0 us]
<7>[ 4393.920445] c2 usb 1-2: unlink qh8-0001/e51bd840 start 3 [2/0 us]
<7>[ 4393.933443] c2 usb 1-2: unlink qh8-0001/e51bd680 start 2 [2/0 us]
<4>[ 4393.939795] c1 dhdsdio_disconnect : no mutex held. set lock
<6>[ 4393.945866] c0 wake disabled for irq 373
<4>[ 4393.945960] c0 dhd_detach thr:3d30 terminated OK
<4>[ 4393.946293] c3 ------------[ cut here ]------------
<4>[ 4393.946353] c3 WARNING: at ../../../../../../kernel/samsung/smdk4412/net/wireless/core.c:736 wdev_cleanup_work+0x10c/0x168()
<4>[ 4393.946431] c3 Modules linked in: dhd(-) [last unloaded: dhd](bf065548)
<4>[ 4393.946473] c3 Backtrace:
<4>[ 4393.946528] c3 [
<4>[ 4393.946583] c3 r6:c05b229c r5:00000009 r4:00000000 r3:00000000
<4>[ 4393.946636] c3 [
<4>[ 4393.946698] c3 [
<4>[ 4393.946765] c3 r8:c05b2190 r7:cdc82000 r6:cdc8200c r5:d5071c3c r4:cdc82120
<4>[ 4393.946808] c3 r3:00000009
<4>[ 4393.946831] c3 [
<4>[ 4393.946902] c3 [
<4>[ 4393.946966] c3 r7:00000000 r6:eb4c1400 r5:c0b05aa0 r4:eb003c40
<4>[ 4393.947009] c3 [
<4>[ 4393.947072] c3 [
<4>[ 4393.947122] c3 [
<4>[ 4393.947172] c3 r6:c008a21c r5:c00a2928 r4:eb061ecc
<4>[ 4393.947210] c3 ---[ end trace a8dc7109f944ca34 ]---
<7>[ 4393.949069] c2 usb 1-2: unlink qh8-0001/e51bd6c0 start 1 [2/0 us]
<6>[ 4393.950299] c0 read_hsic_cb: status:-2 actual:0
<7>[ 4393.951301] c2 usb 1-2: usb auto-suspend
<7>[ 4393.965105] c2 hub 1-0:1.0: hub_suspend
<7>[ 4393.965153] c2 usb usb1: bus auto-suspend
<7>[ 4393.965184] c2 s5p-ehci s5p-ehci: suspend root hub
<6>[ 4393.965686] c2 s5p-ehci s5p-ehci: host_phy_susp:4
<6>[ 4393.965721] c2 request_active_lock_release
<7>[ 4393.967476] c0 s5p-ehci s5p-ehci: IAA with nothing to reclaim?
<4>[ 4394.005159] c3 dhd_detach thr:3d2e terminated OK
<4>[ 4394.005219] c3 dhd_detach thr:3d2f terminated OK
<6>[ 4394.085185] c2 CFG80211-INFO2) wl_event_handler : was terminated
<4>[ 4394.085271] c2 wl_destroy_event_handler thr:3d28 terminated OK
<4>[ 4394.125387] c2 wd wakelock count:0
<4>[ 4394.125487] c2 can`t alloc section 7
<4>[ 4394.125508] c2 dhdsdio_disconnect : the lock is released.
<4>[ 4394.125837] c2 ## wifi_remove
<4>[ 4394.125853] c2 wifi_set_power = 0
<4>[ 4394.125870] c2 ------------------------------------------------------------------------------------------------
<4>[ 4394.125917] c2 brcm_wlan_power Enter: power off
<6>[ 4394.125939] c2 111brcm_wlan_power Enter: power off
<4>[ 4394.125964] c2 gpio_table = [2]
<7>[ 4394.125984] c2 WLAN: GPIO_WLAN_EN = 0
<4>[ 4394.230877] c2 wifi_set_carddetect = 0
<4>[ 4394.230900] c2 gpio_table = [6]
<6>[ 4394.231130] c2 mmc2: card inserted.
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=LRX22G
ro.build.display.id=du_t0lteatt-userdebug 5.0.2 LRX22G eng.azraelskiss.20150312.041538 test-keys
ro.build.version.incremental=eng.azraelskiss.20150312.041538
ro.build.version.sdk=21
ro.build.version.codename=UNOFFICIAL
ro.build.version.all_codenames=REL
ro.build.version.release=5.0.2
ro.build.date=Thu Mar 12 04:16:56 EDT 2015
ro.build.date.utc=1426148216
ro.build.type=userdebug
ro.build.user=azraelskiss
ro.build.host=DARKdragon
ro.build.tags=test-keys
ro.product.brand=samsung
ro.product.name=t0lteatt
ro.product.board=smdk4x12
# ro.product.cpu.abi and ro.product.cpu.abi2 are obsolete,
# use ro.product.cpu.abilist instead.
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.cpu.abilist=armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=exynos4
# ro.build.product is obsolete; use ro.product.device
ro.build.product=t0lteatt
ro.product.model=SGH-I317
ro.product.device=t0lteatt
# Do not try to parse description or fingerprint
ro.build.description=t0lteatt-user 4.4.2 KOT49H I317UCUCNE5 release-keys
ro.build.fingerprint=samsung/t0lteatt/t0lteatt:4.4.2/KOT49H/I317UCUCNE5:user/release-keys
ro.du.device=t0lteatt
ro.du.model=SGH-I317
ro.build.characteristics=default
# end build properties
#
# from device/samsung/t0lteatt/system.prop
#
#
# system.prop for t0lteatt
#
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/ttyS0
ro.telephony.default_network=10
telephony.lteOnGsmDevice=1
ro.sf.lcd_density=320
ro.lcd_min_brightness=20
# System property ril adb log on
persist.radio.adb_log_on=1
# For sys info indication
persist.radio.add_power_save=1
# System property for SIM
persist.radio.apm_sim_not_pwdn=1
ro.com.google.clientidbase=android-samsung
ro.com.google.clientidbase.ms=android-att-us
ro.com.google.clientidbase.am=android-att-us
ro.com.google.clientidbase.yt=android-samsung
ro.com.google.clientidbase.gmm=android-samsung
#
# ADDITIONAL_BUILD_PROPERTIES
#
keyguard.no_require_sim=true
ro.com.android.dataroaming=false
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=Themos.ogg
ro.config.notification_sound=Tejat.ogg
ro.carrier=unknown
ro.config.alarm_alert=Alarm_Classic.ogg
mobiledata.interfaces=pdp0,gprs,ppp0,rmnet0,rmnet1
wifi.interface=wlan0
wifi.supplicant_scan_interval=300
ro.zygote.disable_gl_preload=1
ro.opengles.version=131072
ro.bq.gpu_to_cpu_unsupported=1
debug.hwui.render_dirty_regions=false
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=96m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.gps.agps_provider=1
ro.qc.sdk.izat.premium_enabled=0
ro.qc.sdk.izat.service_mask=0x0
persist.gps.qc_nlp_in_use=1
ro.telephony.ril_class=smdk4x12QComRIL
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.build.selinux=1
dalvik.vm.debug.alloc=0
BUILD_DISPLAY_ID=LRX22G
ro.du.version=DU_t0lteatt_5.0.2_20150312-0815.v9.2-UNOFFICIAL
ro.mod.version=UNOFFICIAL-v9.2
persist.sys.dalvik.vm.lib.2=libart.so
dalvik.vm.isa.arm.features=default
dalvik.vm.lockprof.threshold=500
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dhd 499860 0 - Live 0x00000000
RAM: 2048 MB (2044 MB available)
exynos4-fimc-is: 2.375MB
System RAM: 2044.000MB
Flash: 16 GB (14.676 GB actual); 64 GB (59.479 GB actual)
mmcblk0: 14.676 GB
mmcblk1: 59.479 GB
Touch Screen for samsung SGH-I317
$2.47 No. 10 Messi Football Superstar Design Case For Samsung Galaxy A15 A35 A54 A55 A51 A71 A72 A73 S24 Ultra S23 Plus S22 S20 Cover
$22.56 Hot Paint Graffiti Art Case For Samsung Galaxy S24 S23 S22 S21 S20 Note20 Ultra Plus FE M31 4G 5G Matte Shockproof Back Cover
$3.62 Clear Luminous Fluorescent Silicone Protection Case For Samsung S24 S23 S22 S21 Plus Ultra FE Noctilucent Neon Candy Frame Cover
$21.21 Y2k Hip Hop Girls Print Phone Case For Samsung S24 S23 S22 S21 S20 S10 FE Note20 Note10 Plus Ultra Lite 5G Clear Soft TPU Cover
$48.53 Carbon Fibre 3D Relief For MagSafe Case For Samsung Galaxy S24 Ultra S23 Plus Wireless Charge Hard PC Shockproof Magnetic Cover
$3.34 Clear Case For Samsung Galaxy S24 S23 S22 S21 Ultra S20 FE S10 Note 20 10 Plus Coque Fundas Hello Kitty Kuromi Melody
$25.47 Paper Man Pattern Phone Case For Samsung Galaxy S24 S23 Ultra S22 Plus S21 FE A32 A52S A13 A33 A53 A14 A34 A54 A14 A35 A55 Cover
$33.46 Plastic Wallet Cover for Samsung Galaxy S22 S24 S23 FE Plus Ultra A55 5G Phone Case with Card Holder Shell Shockproof Heavy Duty
$2.94 For Samsung Galaxy S24 S23 S22 Ultra Plus S20 FE A55 A53 A52S A52 A54 A14 A33 A13 A34 A32 A73 A72 A71 A12 A22 A23 5G Case Cover
$30.05 Luxury For Magsafe Magnetic Leather Phone Case for Samsung S23 S22 S24 Ultra Wireless Charging Shockproof Protection Matte Cover
$32.63 CASEKiTTY Skin For Galaxy S24 Ultra Sticker Samsung S23 Back Film S22 Plus Protective Decal Wrap Side Frame Screen Protector
$22.87 Gradient Airbag Shockproof TPU Case for Samsung Galaxy S24 S23 FE S23 Ultra S22 Plus S21 S20 S10 S9 Protective Cover Funda Coque
$34.79 Original Magnetic Bracket Clear Case for Samsung S24 Ultra S24 Plus For Magsafe Ring Stand Holder Shockproof Hard Acrylic Cover
$21.18 Soft with Magsafe Case For Samsung Galaxy S23 Ultra Plus S23Ultra S23FE S24 Ultra S22 S21 S20 S10 S9 S8 FE Note 10 20 Full Cover
$4.09 2PCS Full Glue Screen Protector for Samsung Galaxy S23 S24 S25 S22 S21 S20 Note 20 Ultra S10 Plus Ceramic Film Curved not glass
$3.75 Luxury Plating Transparent Frameless Thin Case For Samsung S24 S23 Ultra S22 S21 FE S20 Plus Note 20 10 Slim Clear Hard PC Cover
$22.64 Ghost Pokemon Gengar Phone Case For Samsung Galaxy S24 Ultra Cases S23 S21 S20 FE S22 9 S24 Plus Note 20 Ultra 10 Silicone Cover
$4.61 Armor Magnetic Metal Ring Case For Samsung Galaxy S24 Ultra S23 Plus S22 S21 S20 FE Camera Lens Protection Cover
$3.78 2PCS Privacy Tempered Glass For Samsung Galaxy S24 Ultra Screen Protector Glass For Samsung S23 S22 S21 Plus Anti-spy Film
$3.56 Luxury Candy Color Hybrid Acrylic Case For Samsung Galaxy S24 S23 FE S22 Ultra Plus Magnetic For Magsafe Wireless Charge Cover
Replacement Battery for samsung SGH-I317
$2.47 No. 10 Messi Football Superstar Design Case For Samsung Galaxy A15 A35 A54 A55 A51 A71 A72 A73 S24 Ultra S23 Plus S22 S20 Cover
$22.56 Hot Paint Graffiti Art Case For Samsung Galaxy S24 S23 S22 S21 S20 Note20 Ultra Plus FE M31 4G 5G Matte Shockproof Back Cover
$3.62 Clear Luminous Fluorescent Silicone Protection Case For Samsung S24 S23 S22 S21 Plus Ultra FE Noctilucent Neon Candy Frame Cover
$21.21 Y2k Hip Hop Girls Print Phone Case For Samsung S24 S23 S22 S21 S20 S10 FE Note20 Note10 Plus Ultra Lite 5G Clear Soft TPU Cover
$48.53 Carbon Fibre 3D Relief For MagSafe Case For Samsung Galaxy S24 Ultra S23 Plus Wireless Charge Hard PC Shockproof Magnetic Cover
$3.34 Clear Case For Samsung Galaxy S24 S23 S22 S21 Ultra S20 FE S10 Note 20 10 Plus Coque Fundas Hello Kitty Kuromi Melody
$25.47 Paper Man Pattern Phone Case For Samsung Galaxy S24 S23 Ultra S22 Plus S21 FE A32 A52S A13 A33 A53 A14 A34 A54 A14 A35 A55 Cover
$2.94 For Samsung Galaxy S24 S23 S22 Ultra Plus S20 FE A55 A53 A52S A52 A54 A14 A33 A13 A34 A32 A73 A72 A71 A12 A22 A23 5G Case Cover
$33.46 Plastic Wallet Cover for Samsung Galaxy S22 S24 S23 FE Plus Ultra A55 5G Phone Case with Card Holder Shell Shockproof Heavy Duty
$32.63 CASEKiTTY Skin For Galaxy S24 Ultra Sticker Samsung S23 Back Film S22 Plus Protective Decal Wrap Side Frame Screen Protector
$30.05 Luxury For Magsafe Magnetic Leather Phone Case for Samsung S23 S22 S24 Ultra Wireless Charging Shockproof Protection Matte Cover
$22.87 Gradient Airbag Shockproof TPU Case for Samsung Galaxy S24 S23 FE S23 Ultra S22 Plus S21 S20 S10 S9 Protective Cover Funda Coque
$34.79 Original Magnetic Bracket Clear Case for Samsung S24 Ultra S24 Plus For Magsafe Ring Stand Holder Shockproof Hard Acrylic Cover
$21.18 Soft with Magsafe Case For Samsung Galaxy S23 Ultra Plus S23Ultra S23FE S24 Ultra S22 S21 S20 S10 S9 S8 FE Note 10 20 Full Cover
$4.09 2PCS Full Glue Screen Protector for Samsung Galaxy S23 S24 S25 S22 S21 S20 Note 20 Ultra S10 Plus Ceramic Film Curved not glass
$3.75 Luxury Plating Transparent Frameless Thin Case For Samsung S24 S23 Ultra S22 S21 FE S20 Plus Note 20 10 Slim Clear Hard PC Cover
$22.64 Ghost Pokemon Gengar Phone Case For Samsung Galaxy S24 Ultra Cases S23 S21 S20 FE S22 9 S24 Plus Note 20 Ultra 10 Silicone Cover
$3.56 Luxury Candy Color Hybrid Acrylic Case For Samsung Galaxy S24 S23 FE S22 Ultra Plus Magnetic For Magsafe Wireless Charge Cover
$3.78 2PCS Privacy Tempered Glass For Samsung Galaxy S24 Ultra Screen Protector Glass For Samsung S23 S22 S21 Plus Anti-spy Film
$4.61 Armor Magnetic Metal Ring Case For Samsung Galaxy S24 Ultra S23 Plus S22 S21 S20 FE Camera Lens Protection Cover
Cover Cases for samsung SGH-I317
$2.47 No. 10 Messi Football Superstar Design Case For Samsung Galaxy A15 A35 A54 A55 A51 A71 A72 A73 S24 Ultra S23 Plus S22 S20 Cover
$22.56 Hot Paint Graffiti Art Case For Samsung Galaxy S24 S23 S22 S21 S20 Note20 Ultra Plus FE M31 4G 5G Matte Shockproof Back Cover
$3.62 Clear Luminous Fluorescent Silicone Protection Case For Samsung S24 S23 S22 S21 Plus Ultra FE Noctilucent Neon Candy Frame Cover
$21.21 Y2k Hip Hop Girls Print Phone Case For Samsung S24 S23 S22 S21 S20 S10 FE Note20 Note10 Plus Ultra Lite 5G Clear Soft TPU Cover
$48.53 Carbon Fibre 3D Relief For MagSafe Case For Samsung Galaxy S24 Ultra S23 Plus Wireless Charge Hard PC Shockproof Magnetic Cover
$3.34 Clear Case For Samsung Galaxy S24 S23 S22 S21 Ultra S20 FE S10 Note 20 10 Plus Coque Fundas Hello Kitty Kuromi Melody
$25.47 Paper Man Pattern Phone Case For Samsung Galaxy S24 S23 Ultra S22 Plus S21 FE A32 A52S A13 A33 A53 A14 A34 A54 A14 A35 A55 Cover
$2.94 For Samsung Galaxy S24 S23 S22 Ultra Plus S20 FE A55 A53 A52S A52 A54 A14 A33 A13 A34 A32 A73 A72 A71 A12 A22 A23 5G Case Cover
$33.46 Plastic Wallet Cover for Samsung Galaxy S22 S24 S23 FE Plus Ultra A55 5G Phone Case with Card Holder Shell Shockproof Heavy Duty
$32.63 CASEKiTTY Skin For Galaxy S24 Ultra Sticker Samsung S23 Back Film S22 Plus Protective Decal Wrap Side Frame Screen Protector
$22.87 Gradient Airbag Shockproof TPU Case for Samsung Galaxy S24 S23 FE S23 Ultra S22 Plus S21 S20 S10 S9 Protective Cover Funda Coque
$34.79 Original Magnetic Bracket Clear Case for Samsung S24 Ultra S24 Plus For Magsafe Ring Stand Holder Shockproof Hard Acrylic Cover
$30.05 Luxury For Magsafe Magnetic Leather Phone Case for Samsung S23 S22 S24 Ultra Wireless Charging Shockproof Protection Matte Cover
$4.09 2PCS Full Glue Screen Protector for Samsung Galaxy S23 S24 S25 S22 S21 S20 Note 20 Ultra S10 Plus Ceramic Film Curved not glass
$21.18 Soft with Magsafe Case For Samsung Galaxy S23 Ultra Plus S23Ultra S23FE S24 Ultra S22 S21 S20 S10 S9 S8 FE Note 10 20 Full Cover
$3.75 Luxury Plating Transparent Frameless Thin Case For Samsung S24 S23 Ultra S22 S21 FE S20 Plus Note 20 10 Slim Clear Hard PC Cover
$22.64 Ghost Pokemon Gengar Phone Case For Samsung Galaxy S24 Ultra Cases S23 S21 S20 FE S22 9 S24 Plus Note 20 Ultra 10 Silicone Cover
$3.56 Luxury Candy Color Hybrid Acrylic Case For Samsung Galaxy S24 S23 FE S22 Ultra Plus Magnetic For Magsafe Wireless Charge Cover
$4.61 Armor Magnetic Metal Ring Case For Samsung Galaxy S24 Ultra S23 Plus S22 S21 S20 FE Camera Lens Protection Cover
$3.78 2PCS Privacy Tempered Glass For Samsung Galaxy S24 Ultra Screen Protector Glass For Samsung S23 S22 S21 Plus Anti-spy Film
| Find Similar devices | |
|---|---|
| Same CPU: | |
| Same Display resolution: | |
| Same ro.build.description: | |
