- General
- Detalles OS
- CPU info
- GPU extensiones
- Mensajes del kernel WiFi
- build.prop
- Módulos
- Mapa de la memoria
Especificaciones generales | |
---|---|
Marca | alps |
Modelo | e1909c_v77_gq1008_5647 |
Versión de Android | 4.0.9; eng.root.1348133959; SDK15 |
CPU | 2 cores; ARMv7 Processor rev 0 (v7l); Max: 1001,0 MHz; Min: 250,2 MHz |
Pantalla | 800 x 480; DPI: 240; Evaluated Size: 3,9" |
Pantalla táctil | Multitouch 5 points |
GPU | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.8@905891 |
RAM | 512 MB (486 MB available) |
Flash | 4 GB (3.616 GB actual); 8 GB (7.417 GB actual) (ver pestaña de mapa de memoria) |
Comunicaciones | |
Teléfono | GSM, Dual SIM; Net: HSPA |
WiFi | wlan_mt6620; IEEE 802.11 a/b/g/n; MediaTek MT6620; AP Mode |
USB Host | No |
Bluetooth | Bluetooth 4.0+HS |
GPS | Yes |
Funciones avanzadas | |
Cámara frontal | Photo: 8.0 MP; Max: 3264x2448; Focus: auto continuous-picture continuous-video macro infinity manual fullscan; Flash modes: auto on off torch |
Cámara trasera | Photo: 0.3 MP; Max size: 640x480; Focus: infinity; No flash |
Sensores | yamaha530 3-axis Magnetic Field sensor (Aichi Steel); range: 0...600; resolution: 0,002 (0%); power: 0,25mA; |
bma222 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; | |
tmd2771 Proximity Sensor (Capella); range: 0...1; resolution: 1 (100%); power: 0,13mA; | |
tmd2771 Light Sensor (Capella); range: 0...10240; resolution: 1 (0,01%); power: 0,13mA; | |
Alarma vibrante | Yes |
Idiomas soportados | 43; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
Batería | Technology: Li-ion; Voltage: 3971 |
FM radio | 76MHz to 108MHz + Transmitter |
SD Version: | 1.1 5 |
KERNEL: Linux version 3.0.13 (root@zhangjianan-Android) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Thu Sep 20 17:38:59 CST 2012
CODENAME: REL
Mainboard: e1909c_v77_gq1008_5647
BRAND: alps
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: e1909c_v77_gq1008_5647
DISPLAY: ALPS.ICS2.MP.V1.5
FINGERPRINT: alps/e1909c_v77_gq1008_5647/e1909c_v77_gq1008_5647:4.0.9/IMM76D/1348133959:user/test-keys
HARDWARE: mt6577
ID: IMM76D
TAGS: test-keys
Processor : ARMv7 Processor rev 0 (v7l)
processor : 0
BogoMIPS : 1993.93
processor : 1
BogoMIPS : 2000.48
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc09
CPU revision : 0
Hardware : MT6577
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<7>[91495.940143] (1)[30717:dmesg] exit
<7>[91495.940374] (1)[30717:dmesg] sig 17 to [30715:AsyncTask #2]
<7>[91495.978253] (1)[30715:AsyncTask #2] sig 9 to [30717:dmesg]
<7>[91496.036240] (0)WQ_WARN: cpu:4, proc:kworker/u:4, [WorkQueueHandler+0x0/0x18 [mtklfb]]dur: 21469153 > 15ms
<7>[91496.048751] (1)[31766:WifiStateMachin] fork [30720:WifiStateMachin]
<7>[91496.050331] (1)[30720:WifiStateMachin] set proc[30720] name: ->[loadDriverThrea]
<7>[91496.065867] (1)[30678:ReferenceQueueD] exit
<7>[91496.066189] (1)[30679:FinalizerDaemon] exit
<7>[91496.066466] (1)[30680:FinalizerWatchd] exit
<7>[91496.081475] (1)[31666:zygote] fork [30721:zygote]
<7>[91496.082379] (1)[31666:zygote] fork [30722:zygote]
<7>[91496.083267] (1)[30722:zygote] set proc[30722] name: ->[ReferenceQueueD]
<7>[91496.088274] (1)[31666:zygote] fork [30723:zygote]
<7>[91496.088301] (0)[30721:zygote] fork [30724:zygote]
<7>[91496.092357] (0)[30724:zygote] set proc[30724] name: ->
<7>[91496.092369] (1)[30723:zygote] set proc[30723] name: ->[FinalizerDaemon]
<4>[91496.092383] (0)[GC]
<7>[91496.092961] (1)[31666:zygote] fork [30725:zygote]
<7>[91496.094757] (0)[30721:zygote] fork [30726:zygote]
<7>[91496.095321] (0)[30725:zygote] set proc[30725] name: ->[FinalizerWatchd]
<7>[91496.097664] (1)[30726:zygote] set proc[30726] name: ->[Signal Catcher]
<7>[91496.105978] (1)[30721:zygote] fork [30727:zygote]
<7>[91496.106096] (1)[30727:zygote] set proc[30727] name: ->[Compiler]
<7>[91496.107012] (1)[30721:zygote] fork [30728:zygote]
<7>[91496.107298] (1)[30728:zygote] set proc[30728] name: ->[ReferenceQueueD]
<7>[91496.107843] (1)[30721:zygote] fork [30729:zygote]
<7>[91496.107982] (1)[30729:zygote] set proc[30729] name: ->[FinalizerDaemon]
<7>[91496.108363] (1)[30721:zygote] fork [30730:zygote]
<7>[91496.108475] (1)[30730:zygote] set proc[30730] name: ->[FinalizerWatchd]
<6>[91496.141091] (1)[WLAN] rfkill_set_block(blocked 0)
<6>[91496.141104] (1)[WLAN] Power on
<3>[91496.141119] (1)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[91496.141139] (1)[STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[91496.141187] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[91496.141202] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(not defined)
<3>[91496.141213] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO124)
<3>[91496.141223] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(not defined)
<3>[91496.141234] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[91496.141244] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO185)
<3>[91496.141255] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(14)
<3>[91496.141266] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO184)
<3>[91496.141276] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(11)
<3>[91496.141287] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<3>[91496.141297] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[91496.141307] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[91496.141317] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[91496.141328] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[91496.141338] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[91496.141348] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_CK(not defined)
<3>[91496.141358] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_WS(not defined)
<3>[91496.141368] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_DAT(not defined)
<3>[91496.141378] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(GPIO206)
<3>[91496.141388] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(not defined)
<3>[91496.141399] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[91496.141411] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<3>[91496.141422] (0)[WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[91496.141442] (0)[WMT-PLAT][W]wmt_plat_gps_lna_ctrl:host gps lna pin not defined!!!
<3>[91496.141454] (0)[WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<7>[91496.147694] (1)[30721:zygote] set proc[30721] name: ->[ndroid.settings]
<7>[91496.154469] (0)WQ_WARN: cpu:4, proc:kworker/u:4, [WorkQueueHandler+0x0/0x18 [mtklfb]]dur: 25625692 > 15ms
<7>[91496.162548] (1)[30721:ndroid.settings] fork [30731:ndroid.settings]
<7>[91496.162764] (0)[30731:ndroid.settings] set proc[30731] name: ->[Binder Thread #]
<7>[91496.164894] (1)[30731:Binder Thread #] fork [30732:Binder Thread #]
<7>[91496.164938] (0)[30732:Binder Thread #] set proc[30732] name: ->[Binder Thread #]
<7>[91496.189018] (1)[30699:Thread-2313] exit
<7>[91496.189720] (0)[30721:ndroid.settings] set proc[30721] name: ->[re-initialized>]
<7>[91496.207890] (0)[30709:Thread-2315] exit
<7>[91496.214885] (0)WQ_WARN: cpu:0, proc:kworker/0:4, [thermal_zone_device_check+0x0/0x18]dur: 309792769 > 15ms
<7>[91496.226573] (0)[30721:re-initialized>] set proc[30721] name: ->[ndroid.settings]
<7>[91496.339577] (1)[31710:er.ServerThread] fork [30733:er.ServerThread]
<7>[91496.339707] (1)[30733:er.ServerThread] set proc[30733] name: ->[Thread-1067]
<3>[91496.344857] (0)[WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[91496.344885] (0)[WMT-PLAT][E]wmt_plat_i2s_ctrl(995):[MT6620]Error:FM digital mode set, but no I2S GPIOs defined
<3>[91496.344905] (0)[WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<3>[91496.345094] (0)[WMT-LIB][I]wmt_lib_ps_handler:MT6620 Not Ready, Dont Send Sleep/Wakeup Command
<4>[91496.345111] (0)[STP-PSM] [E]_stp_psm_notify_stp(1137):ERROR! Invalid Action!!
<4>[91496.345116] (0)
<3>[91496.345149] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[91496.345167] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<4>[91496.360602] (0)mtk_get_bus_freq() return 192400
<3>[91496.360878] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[91496.360893] (0)Flush type = 4 Rx Queue
<3>[91496.361095] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[91496.361112] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[91496.361126] (0)[STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[91496.361136] (0)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[91496.361151] (0)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<6>[91496.361168] (0)[STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[91496.361179] (0)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[91496.361190] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[91496.361201] (0)[STP] mtk_wcn_stp_assert:[I] set f/w assert (0)
<3>[91496.366724] (0)[WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6620)
<3>[91496.372229] (0)[WMT-IC][I]mt6620_ver_check:MT6620: read hw_ver (hw version) (0x8a11)
<3>[91496.377737] (0)[WMT-IC][I]mt6620_ver_check:MT6620: read fw_ver (rom version) (0x8a10)
<3>[91496.377755] (0)[WMT-IC][I]mt6620_find_wmt_ic_info:found ic info(0x8a11) by full match! index:3
<3>[91496.377770] (0)[WMT-IC][I]mt6620_ver_check:MT6620: wmt ic info: MT6620.E4 (0x8a11, WMTHWVER:3, patch_ext:_e3)
<3>[91496.377785] (0)[WMT-CORE][I]wmt_core_hw_check:chip id(0x6620) ver_check ok
<3>[91496.388321] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[91496.388338] (0)[WMT-IC][I]mt6620_sw_init:WMT-CORE: change baudrate(4000000) ok
<3>[91496.391087] (0)[WMT-IC][I]mt6620_update_patch_name:full firmware patch name: /system/etc/firmware/mt6620_patch_e3_hdr.bin
<3>[91496.395633] (0)[WMT-IC][I]mt6620_patch_dwn:===========================================
<3>[91496.395656] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Built Time = 20120628171317
<3>[91496.395669] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[91496.395680] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[91496.395691] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Ph Ver = 0x001d
<3>[91496.395702] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Platform = 1226
<3>[91496.395713] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Content Size = 0xa724
<3>[91496.396227] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Content CRC = 0x483a
<3>[91496.396240] (0)[WMT-IC][I]mt6620_patch_dwn:===========================================
<7>[91496.408558] (0)[30733:Thread-1067] exit
<3>[91496.510430] (1)[WMT-CTRL][W]wmt_ctrl_rx:wmt_ctrl_rx be signaled, but no rx data(200)
<7>[91496.527590] (0)WQ_WARN: cpu:4, proc:kworker/u:3, [WorkQueueHandler+0x0/0x18 [mtklfb]]dur: 19239000 > 15ms
<3>[91496.727578] (0)[WMT-IC][I]mt6620_patch_dwn:wmt_core: patch dwn:0 frag(43, 788) ok
<3>[91496.727653] (0)[WMT-IC][I]mt6620_sw_init:Not to check the patch validity
<3>[91496.728055] (0)[WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf14b138)
<3>[91496.734788] (0)[WMT-IC][I]mt6620_sw_init:init_coex ok
<6>[91496.735267] (0)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[91496.735281] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[91496.735293] (0)[STP] mtk_wcn_stp_assert:[I] set f/w assert (0)
<3>[91496.735303] (0)[WMT-IC][I]mt6620_sw_init:enable host STP-UART-FULL mode
<3>[91496.757400] (0)[WMT-IC][I]mt6620_sw_init:set fm mode (2) ok
<6>[91496.757417] (0)[STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[91496.757431] (0)[STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[91496.757444] (0)mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[91496.757453] (0)board_sdio_ctrl force off before on
<6>[91496.757461] (0)mtk_wcn_cmb_sdio_off (3)
<5>[91496.757581] (0)[Power/clkmgr] [freq_meter] data = 15494, freq = 196 MHz
<5>[91496.757681] (0)[Power/clkmgr] [freq_meter] data = 15495, freq = 196 MHz
<6>[91496.757700] (0)mtk_wcn_cmb_sdio_on (3)
<5>[91496.757814] (0)[Power/clkmgr] [freq_meter] data = 15495, freq = 196 MHz
<3>[91496.757832] (0)msdc3 -> USR Resume <- msdc_pm() : L<1692> PID
<3>[91496.775076] (0)msdc3 -> ================ <- msdc_set_mclk() : L<948> PID
<3>[91496.775097] (0)msdc3 -> !!! Set<400KHz> Source<197000KHz> -> sclk<397KHz> DDR<0> mode<0> div<124> <- msdc_set_mclk() : L<950> PID
<3>[91496.775113] (0)msdc3 -> ================ <- msdc_set_mclk() : L<951> PID
<3>[91496.801589] (0)msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1762> PID
<3>[91496.827952] (0)msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<4084> PID
<3>[91496.827994] (0)msdc3 -> ================ <- msdc_set_mclk() : L<948> PID
<3>[91496.828011] (0)msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<950> PID
<3>[91496.828027] (0)msdc3 -> ================ <- msdc_set_mclk() : L<951> PID
<6>[91496.829010] (0)mmc2: new high speed SDIO card at address 0001
<6>[91496.830926] (0)[WMT-DFT][I]hif_sdio_probe:start!
<6>[91496.830940] (0)[WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x20a) num(0x1)
<6>[91496.830951] (0)[WMT-DFT][I]hif_sdio_probe:card->info[0]: MediaTek MT6620 Wireless Combo Chip
<6>[91496.830962] (0)[WMT-DFT][I]hif_sdio_probe:card->info[1]:
<6>[91496.830971] (0)[WMT-DFT][I]hif_sdio_probe:card->info[2]:
<7>[91496.832935] (0)WQ_WARN: cpu:4, proc:kworker/u:0, [WorkQueueHandler+0x0/0x18 [mtklfb]]dur: 18858461 > 15ms
<6>[91496.833928] (0)[WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(524288)
<7>[91496.833969] (0)WQ_WARN: cpu:4, proc:kworker/u:3, [mmc_rescan+0x0/0x324]dur: 74654539 > 15ms
<6>[91496.914937] (0)[WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[91496.915991] (1)[2:kthreadd] fork [30734:kthreadd]
<6>[91496.916037] (1)[WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<5>[91496.916096] (1)[wlan] net_device prDev(0xcee7e000) allocated
<4>[91496.916508] (1)[RT_MONITOR]WARNNING [30734:ksdioirqd/mmc2] SET NOT ALLOW RT Prio [1] for proc [30734:ksdioirqd/mmc2]
<5>[91496.922211] (1)[wlan] Open FW image: WIFI_RAM_CODE done
<5>[91496.927431] (1)[wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[91496.928158] (1)[wlan] Virtual Address = e4de0000 for COMMON MGMT MEMORY POOL.
<5>[91496.928179] (1)[wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[91496.928204] (1)[wlan] Virtual Address = e4de2000 for SW_RFB_T.
<5>[91496.928218] (1)[wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[91496.928239] (1)[wlan] Virtual Address = e4de6000 for MSDU_INFO_T.
<6>[91496.928255] (1)[wlan] wlanAdapterStart(): Acquiring LP-OWN
<6>[91496.945687] (1)[wlan] Chip ID: 0x6620
<6>[91496.945706] (1)[wlan] Revision ID: 0x1
<5>[91497.172947] (0)[Power/Alarm] alarm_timer_triggered type 3 at 176112.611016619 (1)
<5>[91497.173466] (0)[Power/Alarm] alarm 3 set 176400.000000000
<5>[91497.174249] (0)[Power/Alarm] alarm wait (0x0)
<5>[91497.189942] (1)[Power/Alarm] alarm 3 set 176172.611000000
<7>[91497.239926] (0)WQ_WARN: cpu:4, proc:kworker/u:3, [WorkQueueHandler+0x0/0x18 [mtklfb]]dur: 18427077 > 15ms
<5>[91497.309617] (0)init: starting `stp_dump`
<7>[91497.313476] (0)[1:init] fork [30735:init]
<7>[91497.356091] (1)[30735:init] set proc[30735] name: ->[stp_dump3]
<4>[91497.361149] (1)[STPDbg]stp_dbg_nl_bind: stp_dbg_nl_bind():->
<4>[91497.361167] (1)[STPDbg]stp_dbg_nl_bind: stp_dbg_nl_bind(): exceeding binding limit 4
<7>[91497.361391] (1)[30735:stp_dump3] exit
<7>[91497.361605] (1)[30735:stp_dump3] sig 17 to [1:init]
<5>[91497.361780] (1)init: process `stp_dump`, pid 30735 exited
<5>[91497.361800] (1)init: process `stp_dump` killing any children in process group
<7>[91497.524878] (0)WQ_WARN: cpu:0, proc:kworker/0:2, [thermal_zone_device_check+0x0/0x18]dur: 309999462 > 15ms
<6>[91497.633271] (0)[wlan] wlanAdapterStart(): Waiting for Ready bit..
<6>[91498.025127] (0)[wlan] Ready bit asserted
<5>[91498.053790] (0)[wlan] [wifi] wlan%d netif_carrier_off
<6>[91498.053856] (0)[wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[91498.053997] (0)[wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[91498.054259] (0)[wlan] Domain: map=0, idx=0, code=0x0000
<7>[91498.055580] (0)[2:kthreadd] fork [30736:kthreadd]
<5>[91498.055715] (0)[wlan] tx_thread starts running...
<6>[91498.060795] (1)[WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(20a) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[91498.060871] (1)[WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[91498.060940] (1)[WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 coredump:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[91498.061073] (1)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<3>[91498.061162] (1)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<4>[91498.061202] (0)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<7>[91498.075675] (0)[30720:loadDriverThrea] exit
<7>[91498.085855] (0)[30705:com.specdevice] exit
<7>[91498.107258] (0)[2:kthreadd] fork [30737:kthreadd]
<6>[91498.108869] (1)[RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[91498.108915] (1)ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[91498.125423] (1)WQ_WARN: cpu:1, proc:kworker/1:1, [wlanSetMulticastListWorkQueue+0x0/0x1f4 [wlan_mt6620]]dur: 18278923 > 15ms
<5>[91498.127165] (1)init: starting `wpa_supplicant`
<7>[91498.127390] (1)[1:init] fork [30738:init]
<7>[91498.128368] (1)[31766:WifiStateMachin] fork [30739:WifiStateMachin]
<7>[91498.128417] (0)[30739:WifiStateMachin] set proc[30739] name: ->[WifiMonitor]
<7>[91498.136348] (0)[30738:init] set proc[30738] name: ->[logwrapper]
<7>[91498.138267] (0)[30738:logwrapper] fork [30740:logwrapper]
<7>[91498.156538] (1)[30740:logwrapper] set proc[30740] name: ->[wpa_supplicant]
<5>[91498.365318] (0)[wlan] N=0 closed
<5>[91498.365347] (0)[wlan] EVENT-ROAMING ABORT: Current Time = 85224720
<5>[91498.365365] (0)[wlan] [13] TRANSITION: [0] -> [0]
<6>[91498.365748] (1)[wlan] NAF=0,0,0
<6>[91498.366403] (1)[wlan] NAF=0,0,0
<4>[91498.494958] (0)[cpu-0:thread:61] 2013-08-29 00:04:01.321955 UTC; android time 2013-08-29 06:04:01.321955
<4>[91498.495014] (0)[WDK], local_bit:0x0, cpu:0
<4>[91498.495044] (0)[WDK]: kick External WDT
<4>[91498.495081] (0)[WDK], local_bit:0x1, cpu:0, check bit0x:3
<4>[91498.495115] (0)[WDK]: cpu:0, kick local wdt
<4>[91498.495165] (0)WDT mpcore_wdt_keepalive:cpu-0: count:325000000. prescale:0, mpcore_margin:25,TWD_WDOG_LOAD:135f1b41
<4>[91498.495220] (0)WDT mpcore_wdt_start:cpu-0,control: 0x7, count:0x135f1b37, load:0x135f1b41
<4>[91498.514962] (1)[cpu-0:thread:62] 2013-08-29 00:04:01.341960 UTC; android time 2013-08-29 06:04:01.341960
<4>[91498.515018] (1)[WDK], local_bit:0x1, cpu:1
<4>[91498.515047] (1)[WDK]: kick External WDT
<4>[91498.515083] (1)[WDK], local_bit:0x3, cpu:1, check bit0x:3
<4>[91498.515117] (1)[WDK]: cpu:1, kick local wdt
<4>[91498.515166] (1)WDT mpcore_wdt_keepalive:cpu-1: count:325000000. prescale:0, mpcore_margin:25,TWD_WDOG_LOAD:135f1b40
<4>[91498.515221] (1)WDT mpcore_wdt_start:cpu-1,control: 0x7, count:0x135f1b37, load:0x135f1b40
<5>[91498.650640] (0)[wlan] [13] TRANSITION: [0] -> [2]
<7>[91498.835956] (0)WQ_WARN: cpu:0, proc:kworker/0:2, [thermal_zone_device_check+0x0/0x18]dur: 310975923 > 15ms
<5>[91498.894094] (0)[Power/Battery] [use_chip_trim_value] 5890 -> 5860
<5>[91498.904294] (0)[Power/Battery] [use_chip_trim_value] 5419 -> 5391
<5>[91498.906229] (0)[Power/Battery] [use_chip_trim_value] -291 -> -289
<5>[91498.913932] (0)[Power/Battery] [FGADC] 0,5391,0,-289,3989,79,86,85,1980,1984,121,0,0,1000,0,3867,1000,0,14,5765,94,103
<0>[91498.914163] (0)[MUSB]mt_usb_disconnect 296: [MUSB] USB is ready for disconnect
<5>[91498.922878] (0)[Power/Battery] [use_chip_trim_value] 5380 -> 5353
<5>[91498.922902] (0)[Power/Battery] [tbat_workaround] 728,751,0,535,43
<7>[91498.929641] (0)[30715:AsyncTask #2] fork [30741:AsyncTask #2]
<7>[91498.933635] (0)[18614:d.process.acore] fork [30742:d.process.acore]
<7>[91498.941154] (1)[30742:d.process.acore] set proc[30742] name: ->[Timer-1]
<5>[91498.945132] (1)[wlan] [13] TRANSITION: [2] -> [0]
<6>[91498.946787] (1)[wlan] NAF=0,0,0
<7>[91498.966335] (0)[30741:AsyncTask #2] set proc[30741] name: ->[dmesg]
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IMM76D
ro.build.display.id=ALPS.ICS2.MP.V1.5
ro.build.version.incremental=eng.root.1348133959
ro.custom.build.version=1348133959
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.9
ro.build.date=2012年 09月 20日 星期四 17:41:27 CST
ro.build.date.utc=1348134087
ro.build.type=user
ro.build.user=root
ro.build.host=agold-zhangjianan-Android
ro.build.tags=test-keys
ro.product.model=e1909c_v77_gq1008_5647
ro.product.brand=alps
ro.product.name=e1909c_v77_gq1008_5647
ro.product.device=e1909c_v77_gq1008_5647
ro.product.board=e1909c_v77_gq1008_5647
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=alps
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=e1909c_v77_gq1008_5647
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=e1909c_v77_gq1008_5647-user 4.0.9 IMM76D eng.root.1348133959 test-keys
ro.build.fingerprint=alps/e1909c_v77_gq1008_5647/e1909c_v77_gq1008_5647:4.0.9/IMM76D/1348133959:user/test-keys
ro.build.flavor=
persist.sys.timezone=
ro.build.characteristics=default
ro.build.shutdown.animation=no
ro.build.tv.location=-1
ro.build.time.format=12
ro.build.date.format=yyyy-MMM-d-EE
ro.build.ipo.setting=yes
ro.build.bluetooth.name=
ro.build.wifi.ssid=
ro.build.default.scrbrightness=160
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=ALPS.ICS2.MP.V1.5
ro.mediatek.platform=MT6577
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.ICS2.MP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=128m
# Encrypt phone function
ro.crypto.tmpfs_options=mode=0771,uid=1000,gid=1000
ro.crypto.fs_type=ext4
ro.crypto.fs_real_blkdev=/emmc@usrdata
ro.crypto.fs_mnt_point=/data
ro.crypto.fs_options=noauto_da_alloc
ro.crypto.fs_flags=0x00000406
# USB MTP WHQL
ro.sys.usb.mtp.whql.enable=0
# Power off opt in IPO
sys.ipo.pwrdncap=2
ro.sys.usb.storage.type=mtp,mass_storage
#
# ADDITIONAL_BUILD_PROPERTIES
#
fmradio.driver.chip=1
ro.sf.hwrotation=0
ril.current.share_modem=2
launcherplus.allappsgrid=2d
launcher2.allappsgrid=3d_20
curlockscreen=2
ro.mediatek.gemini_support=true
persist.radio.fd.counter=20
persist.radio.fd.off.counter=20
drm.service.enabled=true
fmradio.driver.enable=1
mediatek.wlan.chip=MT6620
mediatek.wlan.module.postfix=
dalvik.vm.mtk-stack-trace-file=/data/anr/mtk_traces.txt
ro.config.notification_sound=Aldebaran.ogg
ro.config.alarm_alert=Beeps.mp3
ro.config.ringtone=ANDROMEDA.ogg
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
wlan_mt6620 286280 0 - Live 0xbf205000 (P)
cfg80211 122276 0 - Live 0xbf1dc000
mtk_fm_priv 8917 0 - Live 0xbf1d6000 (P)
mt6620_fm_drv 111949 1 mtk_fm_priv, Live 0xbf1ae000
mtk_stp_bt 39986 0 - Live 0xbf1a1000
mtk_stp_gps 37294 0 - Live 0xbf194000
mtk_stp_uart 21593 0 - Live 0xbf18b000 (P)
mtk_stp_wmt 375868 7 wlan_mt6620,mtk_fm_priv,mt6620_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf121000 (P)
mtk_hif_sdio 18769 2 wlan_mt6620,mtk_stp_wmt, Live 0xbf118000
devinfo 840 0 - Live 0xbf114000 (P)
devapc 4553 0 - Live 0xbf10f000 (P)
sec 90381 0 - Live 0xbf0f2000 (P)
vcodec_kernel_driver 42938 0 - Live 0xbf0e2000 (P)
m4u 113419 22 - Live 0xbf0bd000 (P)
ccmni 17150 0 - Live 0xbf0b4000 (P)
ccci 117400 15 ccmni, Live 0xbf08c000 (P)
ccci_plat 127170 2 ccmni,ccci, Live 0xbf063000 (P)
mtk_drvb_77 6081 0 - Live 0xbf05e000 (P)
mtklfb 23594 0 - Live 0xbf054000
pvrsrvkm 233143 77 mtklfb, Live 0xbf00d000
mtk_hwe 1386 0 - Live 0xbf009000 (P)
aed 16384 3 - Live 0xbf000000 (P)
RAM: 512 MB (486 MB available)
System RAM: 486.000MB
mtkfb.0: 4.000MB
Flash: 4 GB (3.616 GB actual); 8 GB (7.417 GB actual)
mmcblk0: 3.616 GB
mmcblk1: 7.417 GB
Pantalla táctil para alps e1909c_v77_gq1008_5647
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
Batería de repuesto para alps e1909c_v77_gq1008_5647
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
Fundas para alps e1909c_v77_gq1008_5647
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
Find Similar devices | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |