1. Install SpecDevice
2. Run and decode your specs
3. Get your link (read more...)
General Specifications | |
---|---|
Manufacturer | alps |
Model | yuanda75_ics |
Firmware | 4.0.4; eng.xcs.1350646086; SDK15 |
CPU | 1 core; ARMv7 Processor rev 10 (v7l); Max: 1001.0 MHz; Min: 166.8 MHz |
Display | 800 x 480; DPI: 240; Evaluated Size: 3.9" |
Touch screen | Multitouch 5 points |
GPU | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.8@789263 |
RAM | 512 MB (484 MB available) |
Flash | 4 GB (3.627 GB actual); 8 GB (7.501 GB actual) (see memory map tab) |
Communications | |
Phone | GSM, Dual SIM; Net: EDGE |
WiFi | wlan; IEEE 802.11 a/b/g/n; MediaTek MT6620; AP Mode |
USB Host | No |
Bluetooth | Bluetooth 4.0+HS |
GPS | Yes |
Advanced Features | |
Front camera | Photo: 8.0 MP; Max: 3264x2448; Focus: auto continuous-picture continuous-video macro infinity manual fullscan; Flash modes: auto on off torch |
Back camera | Photo: 0.3 MP; Max size: 640x480; Focus: infinity; No flash |
Sensors | MMC3280MA 3-axis Magnetic Field sensor (MEMSIC Inc.); range: 0...2000; resolution: 0.357 (0.018%); power: 0.6mA; |
MC3210 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0.004 (0.012%); power: 0.13mA; | |
Corrected Gyroscope Sensor (Google Inc.); range: 0...34.91; resolution: 0.011 (0.031%); power: 6.83mA; | |
STK3101 Ambient Light Sensor (Sitronix); range: 0...10240; resolution: 1 (0.01%); power: 0.13mA; | |
STK3158 Proximity Sensor (Sitronix); range: 0...1; resolution: 1 (100%); power: 0.13mA; | |
Rotation Vector Sensor (Google Inc.); range: 0...1; resolution: 0 (0%); power: 6.83mA; | |
Gravity Sensor (Google Inc.); range: 0...19.613; resolution: 0.004 (0.02%); power: 6.83mA; | |
Linear Acceleration Sensor (Google Inc.); range: 0...19.613; resolution: 0.004 (0.02%); power: 6.83mA; | |
Vibrator | Yes |
Supported languages | 43; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
Battery | Technology: Li-ion; Voltage: 3775 |
FM radio | 76 to 108MHz |
SD Version: | 1.1 5 |
KERNEL: Linux version 3.0.13 (xcs@xcs) (gcc version 4.4.3 (GCC) ) #1 PREEMPT Fri Oct 19 19:27:53 CST 2012
CODENAME: REL
Mainboard: yuanda75_ics
BRAND: alps
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: yuanda75_ics
DISPLAY: S500_A_AKL_YD_A01_V13
FINGERPRINT: alps/yuanda75_ics/yuanda75_ics:4.0.4/IMM76D/1350646086:user/test-keys
HARDWARE: mt6575
ID: IMM76D
TAGS: test-keys
Processor : ARMv7 Processor rev 10 (v7l)
BogoMIPS : 1993.93
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc09
CPU revision : 10
Hardware : MT6575
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<7>[ 3626.931558] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 8857923 > 8ms
<7>[ 3626.931588] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 3626.939843] [4810:dmesg] exit
<7>[ 3626.940049] [4810:dmesg] sig 17 to [4809:AsyncTask #3]
<7>[ 3626.946654] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 9768308 > 8ms
<7>[ 3626.946684] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 3626.961638] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 8222077 > 8ms
<7>[ 3626.961668] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 3626.976598] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 8018231 > 8ms
<7>[ 3626.976633] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 3626.985190] [282:WifiStateMachin] fork err at pid
<7>[ 3626.985211] [282:WifiStateMachin] fork [4811:WifiStateMachin]
<7>[ 3626.991771] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 9725769 > 8ms
<7>[ 3626.991800] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 3626.993135] [4811:WifiStateMachin] set proc[4811] name: ->[loadDriverThrea]
<7>[ 3627.009255] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 10305231 > 8ms
<7>[ 3627.009284] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 3627.022340] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 8065154 > 8ms
<7>[ 3627.022375] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 3627.051919] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 9687231 > 8ms
<7>[ 3627.051948] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<6>[ 3627.057635] [WLAN] rfkill_set_block(blocked 0)
<6>[ 3627.057645] [WLAN] Power on
<3>[ 3627.057657] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[ 3627.058465] [STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[ 3627.058501] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[ 3627.059568] [WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(GPIO183)
<3>[ 3627.060272] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO119)
<3>[ 3627.060977] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(not defined)
<3>[ 3627.061758] [WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[ 3627.062453] [WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO13)
<3>[ 3627.063207] [WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(14)
<3>[ 3627.073107] [WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO15)
<3>[ 3627.078085] [WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(18)
<7>[ 3627.081996] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 9196539 > 8ms
<7>[ 3627.082029] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<3>[ 3627.084889] [WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<3>[ 3627.086374] [WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[ 3627.092183] [WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[ 3627.092904] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<7>[ 3627.097345] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 9140154 > 8ms
<7>[ 3627.097374] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<3>[ 3627.106105] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[ 3627.108233] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[ 3627.108970] [WMT-PLAT][I]wmt_plat_dump_pin_conf:FM digital mode is not set, no need for I2S GPIOs
<7>[ 3627.112789] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 10307462 > 8ms
<7>[ 3627.112828] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<3>[ 3627.113450] [WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(GPIO118)
<3>[ 3627.114204] [WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(GPIO117)
<3>[ 3627.114951] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[ 3627.126886] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<3>[ 3627.128607] [WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<7>[ 3627.137299] [246:er.ServerThread] fork err at pid
<7>[ 3627.137330] [246:er.ServerThread] fork [4812:er.ServerThread]
<7>[ 3627.142180] [4812:er.ServerThread] set proc[4812] name: ->[Thread-396]
<7>[ 3627.143706] [4812:Thread-396] exit
<7>[ 3627.167703] [4803:Thread-411] exit
<7>[ 3627.172827] WQ_WARN: cpu:1, proc:kworker/u:1, dur: 11106307 > 8ms
<7>[ 3627.172856] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 3627.177232] [4807:Thread-412] exit
<7>[ 3627.187000] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 10039616 > 8ms
<7>[ 3627.187029] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 3627.202006] WQ_WARN: cpu:1, proc:kworker/u:1, dur: 8105230 > 8ms
<7>[ 3627.202035] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<3>[ 3627.336976] [WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[ 3627.337797] [WMT-PLAT][I]wmt_plat_i2s_ctrl:[MT6620]warnning:FM digital mode is not set, no I2S GPIO settings should be modified by combo driver
<3>[ 3627.339461] [WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<3>[ 3627.340468] [WMT-LIB][I]wmt_lib_ps_handler:MT6620 Not Ready, Dont Send Sleep/Wakeup Command
<4>[ 3627.341554] [STP-PSM] [E]_stp_psm_notify_stp(990):ERROR! Invalid Action!!
<4>[ 3627.341586]
<3>[ 3627.344045] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[ 3627.345251] [WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 3627.346183] [WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 3627.353532] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<4>[ 3627.355122] mt6575_get_bus_freq() return 260000
<3>[ 3627.356139] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[ 3627.357903] Flush type = 4 Rx Queue
<3>[ 3627.360121] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[ 3627.360984] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[ 3627.361044] [STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[ 3627.361723] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[ 3627.362449] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[ 3627.363177] [STP-PSM] [I]_stp_psm_set_state: work_state = ACT --> ACT
<6>[ 3627.364023] [STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[ 3627.364075] [STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[ 3627.364133] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<3>[ 3627.369784] [WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6620)
<3>[ 3627.376966] [WMT-IC][I]mt6620_ver_check:MT6620: read hw_ver (hw version) (0x8a11)
<3>[ 3627.378196] [WMT-DEV][E]wmt_dev_rx_timeout(746):gRxCount != 0 (1), reset it!
<3>[ 3627.382332] [WMT-CTRL][W]wmt_ctrl_rx:wmt_ctrl_rx be signaled, but no rx data(200)
<3>[ 3627.383531] [WMT-IC][I]mt6620_ver_check:MT6620: read fw_ver (rom version) (0x8a10)
<3>[ 3627.384585] [WMT-IC][I]mt6620_find_wmt_ic_info:found ic info(0x8a11) by full match! index:3
<3>[ 3627.385686] [WMT-IC][I]mt6620_ver_check:MT6620: wmt ic info: MT6620.E4 (0x8a11, WMTHWVER:3, patch_ext:_e3)
<3>[ 3627.392895] [WMT-CORE][I]wmt_core_hw_check:chip id(0x6620) ver_check ok
<3>[ 3627.404209] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[ 3627.405021] [WMT-IC][I]mt6620_sw_init:WMT-CORE: change baudrate(4000000) ok
<3>[ 3627.411130] [WMT-IC][I]mt6620_update_patch_name:full firmware patch name: /system/etc/firmware/mt6620_patch_e3_hdr.bin
<3>[ 3627.418209] [WMT-IC][I]mt6620_patch_dwn:===========================================
<3>[ 3627.419164] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Built Time = 20120419185021
<3>[ 3627.423983] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[ 3627.424897] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[ 3627.425692] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Ph Ver = 0x001b
<3>[ 3627.427264] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Platform = 1212
<3>[ 3627.428562] [WMT-IC][I]mt6620_patch_dwn:===========================================
<7>[ 3627.488400] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 9594385 > 8ms
<7>[ 3627.488428] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 3627.503511] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 10448923 > 8ms
<7>[ 3627.503545] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 3627.518384] WQ_WARN: cpu:1, proc:kworker/u:1, dur: 10876770 > 8ms
<7>[ 3627.518413] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 3627.533272] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 10272077 > 8ms
<7>[ 3627.533300] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 3627.548108] WQ_WARN: cpu:1, proc:kworker/u:1, dur: 10204846 > 8ms
<7>[ 3627.548142] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 3627.563174] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 10328923 > 8ms
<7>[ 3627.563203] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 3627.578015] WQ_WARN: cpu:1, proc:kworker/u:1, dur: 10200692 > 8ms
<7>[ 3627.578048] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 3627.592896] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 10903308 > 8ms
<7>[ 3627.592924] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 3627.607937] WQ_WARN: cpu:1, proc:kworker/u:1, dur: 10406000 > 8ms
<7>[ 3627.607974] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 3627.622923] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 10235923 > 8ms
<7>[ 3627.622958] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 3627.637762] WQ_WARN: cpu:1, proc:kworker/u:1, dur: 10156154 > 8ms
<7>[ 3627.637791] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 3627.652809] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 10413538 > 8ms
<7>[ 3627.652837] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 3627.668075] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 11968923 > 8ms
<7>[ 3627.668104] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[ 3627.682825] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 11307000 > 8ms
<7>[ 3627.682856] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<3>[ 3627.756994] [WMT-IC][I]mt6620_patch_dwn:wmt_core: patch dwn:0 frag(43, 928) ok
<3>[ 3627.757978] [WMT-IC][I]mt6620_sw_init:Not to check the patch validity
<3>[ 3627.759177] [WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf12dfc0)
<3>[ 3627.763841] [WMT-IC][I]mt6620_sw_init:init_coex ok
<6>[ 3627.769064] [STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[ 3627.769090] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<3>[ 3627.769113] [WMT-IC][I]mt6620_sw_init:enable host STP-UART-FULL mode
<3>[ 3627.789077] [WMT-IC][I]mt6620_sw_init:set fm mode (2) ok
<6>[ 3627.789762] [STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[ 3627.789804] [STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[ 3627.789836] mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[ 3627.790528] board_sdio_ctrl force off before on
<6>[ 3627.790552] mtk_wcn_cmb_sdio_off (3)
<6>[ 3627.790614] mtk_wcn_cmb_sdio_on (3)
<3>[ 3627.790676] msdc3 -> USR Resume <- msdc_pm() : L<1260> PID
<3>[ 3627.807067] msdc3 -> ================ <- msdc_set_mclk() : L<756> PID
<3>[ 3627.808114] msdc3 -> !!! Set<400KHz> Source<197000KHz> -> sclk<397KHz> DDR<0> mode<0> div<124> <- msdc_set_mclk() : L<758> PID
<3>[ 3627.809769] msdc3 -> ================ <- msdc_set_mclk() : L<759> PID
<3>[ 3627.832560] msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1320> PID
<3>[ 3627.864421] msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<3218> PID
<3>[ 3627.865599] msdc3 -> ================ <- msdc_set_mclk() : L<756> PID
<3>[ 3627.866635] msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<758> PID
<3>[ 3627.868311] msdc3 -> ================ <- msdc_set_mclk() : L<759> PID
<6>[ 3627.879714] mmc2: new high speed SDIO card at address 0001
<6>[ 3627.882513] [WMT-DFT][I]hif_sdio_probe:start!
<6>[ 3627.882556] [WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x20a) num(0x1)
<6>[ 3627.882592] [WMT-DFT][I]hif_sdio_probe:card->info[0]: MediaTek MT6620 Wireless Combo Chip
<6>[ 3627.882630] [WMT-DFT][I]hif_sdio_probe:card->info[1]:
<6>[ 3627.882660] [WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[ 3627.882939] [WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(520192)
<7>[ 3627.883019] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 89485461 > 8ms
<7>[ 3627.883072] work: mmc_rescan+0x0/0x370
<6>[ 3627.946882] [WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[ 3627.947133] [2:kthreadd] fork err at pid
<7>[ 3627.947194] [2:kthreadd] fork [4813:kthreadd]
<6>[ 3627.947270] [WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<5>[ 3627.947357] [wlan] net_device prDev(0xc3a26000) allocated
<4>[ 3627.949116] [RT_MONITOR]WARNNING [4813:ksdioirqd/mmc2] SET NOT ALLOW RT Prio [1] for proc [4813:ksdioirqd/mmc2]
<5>[ 3627.953720] [wlan] Open FW image: WIFI_RAM_CODE done
<4>[ 3627.955538] Backtrace:
<4>[ 3627.955905] [
<4>[ 3627.957060] r7:00000001 r6:00000000 r5:cfb54000 r4:c6493c00
<4>[ 3627.957804] [
<4>[ 3627.958979] [
<5>[ 3627.961478] [wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[ 3627.962536] [wlan] Virtual Address = defd3000 for COMMON MGMT MEMORY POOL.
<5>[ 3627.963403] [wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[ 3627.964118] [wlan] Virtual Address = df6b9000 for SW_RFB_T.
<5>[ 3627.964815] [wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[ 3627.965526] [wlan] Virtual Address = df6bd000 for MSDU_INFO_T.
<6>[ 3627.966257] [wlan] wlanAdapterStart(): Acquiring LP-OWN
<4>[ 3627.966463] [
<4>[ 3627.968071] [
<4>[ 3627.969212] [
<4>[ 3627.970939] r7:00000013 r6:c0089674 r5:c00a0cf4 r4:dcadfd78
<6>[ 3627.987058] [wlan] Chip ID: 0x6620
<6>[ 3627.987099] [wlan] Revision ID: 0x1
<6>[ 3628.660844] [wlan] wlanAdapterStart(): Waiting for Ready bit..
<6>[ 3629.037115] [wlan] Ready bit asserted
<5>[ 3629.075556] [wlan] [wifi] wlan%d netif_carrier_off
<6>[ 3629.076193] [wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[ 3629.076910] [wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[ 3629.082855] [wlan] Domain: map=0, idx=0, code=0x0000
<7>[ 3629.084409] [2:kthreadd] fork err at pid
<7>[ 3629.084497] [2:kthreadd] fork [4814:kthreadd]
<5>[ 3629.084647] [wlan] tx_thread starts running...
<6>[ 3629.088028] [WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(20a) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[ 3629.088042] [WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[ 3629.088059] [WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[ 3629.089955] [STP-PSM] [I]_stp_psm_enable: PSM MODE Enable==============================>
<4>[ 3629.089964]
[STP-PSM] [I]_stp_psm_dump_active_q: Active op list:++
<4>[ 3629.091742] [STP-PSM] [I]_stp_psm_dump_active_q: STP_OPID_PSM_WAKEUP
<4>[ 3629.092533] [STP-PSM] [I]_stp_psm_dump_active_q: Active op list:--
<4>[ 3629.093317] [STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<4>[ 3629.094804] [STP-PSM] [I]_stp_psm_notify_wmt_wakeup_wq: OPID(1) type(0) bRet(1)
<4>[ 3629.094811]
<4>[ 3629.096170] [STP-PSM] [I]_stp_psm_do_wait: +Total waits for ACT takes 0 msec
<4>[ 3629.097208] [STP-PSM] [I]_stp_psm_enable: PSM MODE Enable<=============================
<4>[ 3629.097216]
<3>[ 3629.106522] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<7>[ 3629.109535] [4811:loadDriverThrea] exit
<7>[ 3629.142650] [28:kworker/u:1] fork err at pid
<7>[ 3629.142671] [28:kworker/u:1] fork [4815:kworker/u:1]
<7>[ 3629.142714] [4815:kworker/u:1] fork err at pid
<7>[ 3629.142728] [4815:kworker/u:1] fork [4816:kworker/u:1]
<7>[ 3629.142769] [4816:kworker/u:1] exit
<7>[ 3629.142794] [4816:kworker/u:1] sig 17 to [4815:kworker/u:1]
<7>[ 3629.142825] [4815:kworker/u:1] exit
<6>[ 3629.144552] [RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[ 3629.144579] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[ 3629.157571] [1:init] fork err at pid
<7>[ 3629.157593] [1:init] fork [4817:init]
<7>[ 3629.158262] [282:WifiStateMachin] fork err at pid
<7>[ 3629.158285] [282:WifiStateMachin] fork [4818:WifiStateMachin]
<7>[ 3629.158471] WQ_WARN: cpu:0, proc:kworker/0:3, dur: 15136384 > 8ms
<7>[ 3629.158541] work: wlanSetMulticastListWorkQueue+0x0/0x1f4 [wlan]
<7>[ 3629.158583] [4818:WifiStateMachin] set proc[4818] name: ->[WifiMonitor]
<7>[ 3629.159983] [4817:init] set proc[4817] name: ->[logwrapper]
<7>[ 3629.172066] [4817:logwrapper] fork err at pid
<7>[ 3629.172098] [4817:logwrapper] fork [4819:logwrapper]
<7>[ 3629.173000] [4819:logwrapper] set proc[4819] name: ->[wpa_supplicant]
<5>[ 3629.227090] [wlan] N=0 closed
<5>[ 3629.227512] [wlan] EVENT-ROAMING ABORT: Current Time = 3329210
<5>[ 3629.228228] [wlan] [13] TRANSITION: [0] -> [0]
<6>[ 3629.231025] [wlan] NAF=0,0,0
<6>[ 3629.231039] [wlan] NAF=0,0,0
<5>[ 3629.388831] [wlan] [13] TRANSITION: [0] -> [2]
<5>[ 3629.582218] [wlan] [13] TRANSITION: [2] -> [0]
<6>[ 3629.589879] [wlan] NAF=0,0,0
<7>[ 3629.701306] [4809:AsyncTask #3] fork err at pid
<7>[ 3629.701336] [4809:AsyncTask #3] fork [4820:AsyncTask #3]
<7>[ 3629.708986] [4820:AsyncTask #3] set proc[4820] name: ->[dmesg]
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IMM76D
ro.build.display.id=S500_A_AKL_YD_A01_V13
ro.build.version.incremental=eng.xcs.1350646086
ro.custom.build.version=1350646086
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=Fri Oct 19 19:29:11 CST 2012
ro.build.date.utc=1350646151
ro.build.type=user
ro.build.user=xcs
ro.build.host=xcs
ro.build.tags=test-keys
ro.product.model=yuanda75_ics
ro.product.brand=alps
ro.product.name=yuanda75_ics
ro.product.device=yuanda75_ics
ro.product.board=yuanda75_ics
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=alps
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=yuanda75_ics
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=yuanda75_ics-user 4.0.4 IMM76D eng.xcs.1350646086 test-keys
ro.build.fingerprint=alps/yuanda75_ics/yuanda75_ics:4.0.4/IMM76D/1350646086:user/test-keys
ro.build.flavor=
ro.build.characteristics=default
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=S500_A_AKL_YD_A01_V13
ro.mediatek.platform=MT6575
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.ICS.MP
ro.mediatek.phone.name=ZYNC_CLOUD
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=128m
# Encrypt phone function
ro.crypto.tmpfs_options=mode=0771,uid=1000,gid=1000
ro.crypto.fs_type=ext4
ro.crypto.fs_real_blkdev=/emmc@usrdata
ro.crypto.fs_mnt_point=/data
ro.crypto.fs_options=noauto_da_alloc
ro.crypto.fs_flags=0x00000406
# audio
ro.camera.sound.forced=0
ro.audio.silent=0
# USB Config Type
ro.sys.usb.storage.type=mtp,mass_storage
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.sf.hwrotation=180
ril.current.share_modem=2
launcherplus.allappsgrid=2d
launcher2.allappsgrid=3d_20
curlockscreen=2
ro.mediatek.gemini_support=true
drm.service.enabled=true
persist.radio.fd.counter=20
persist.radio.fd.off.counter=20
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.config.ringtone=Backroad.ogg
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
wlan 285380 0 - Live 0xbf1e4000 (P)
cfg80211 122425 0 - Live 0xbf1bb000
mtk_fm_priv 8909 0 - Live 0xbf1b5000 (P)
mt6620_fm_drv 110874 1 mtk_fm_priv, Live 0xbf18d000
mtk_stp_bt 39718 0 - Live 0xbf180000
mtk_stp_gps 37190 0 - Live 0xbf173000
mtk_stp_uart 21669 0 - Live 0xbf16a000 (P)
mtk_stp_wmt 343726 7 wlan,mtk_fm_priv,mt6620_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf109000 (P)
mtk_hif_sdio 18042 2 wlan,mtk_stp_wmt, Live 0xbf100000
devinfo 748 0 - Live 0xbf0fc000 (P)
sec 109563 0 - Live 0xbf0db000 (P)
mt6575_vcodec_kernel_driver 23817 0 - Live 0xbf0d0000 (P)
mt6575_m4u 108464 6 - Live 0xbf0ac000 (P)
ccmni 17214 0 - Live 0xbf0a3000 (P)
ccci 140544 15 ccmni, Live 0xbf075000 (P)
ccci_plat 125068 3 sec,ccmni,ccci, Live 0xbf04e000 (P)
mtk_drvb 5115 0 - Live 0xbf049000 (P)
mtklfb 14369 0 - Live 0xbf041000
pvrsrvkm 163655 77 mtklfb, Live 0xbf00d000
alps_core 2221 0 - Live 0xbf009000 (P)
aed 15834 3 - Live 0xbf000000 (P)
RAM: 512 MB (484 MB available)
System RAM: 484.000MB
mtkfb.0: 6.000MB
Flash: 4 GB (3.627 GB actual); 8 GB (7.501 GB actual)
mmcblk0: 3.627 GB
mmcblk1: 7.501 GB
Touch Screen for alps yuanda75_ics
$2.55 New Japan Alps dual 6-pin volume potentiometer a10k b10k 50K 100K
$41.04 ALPS 50KAx2 RK168 Series Rotary Potentiometer with Motor Dual-unit Flat-shaft Length:20mm
$58.54 Japan ALPS Alps RDC9010006 robot and industrial machinery / communication equipment sensors
$4.14 ALPS RKJXM EL25 Hollow Shaft Encoder Switch with Joystick 8-way Multi Function Switch
Replacement Battery for alps yuanda75_ics
$2.55 New Japan Alps dual 6-pin volume potentiometer a10k b10k 50K 100K
$41.04 ALPS 50KAx2 RK168 Series Rotary Potentiometer with Motor Dual-unit Flat-shaft Length:20mm
$58.54 Japan ALPS Alps RDC9010006 robot and industrial machinery / communication equipment sensors
$4.14 ALPS RKJXM EL25 Hollow Shaft Encoder Switch with Joystick 8-way Multi Function Switch
Cover Cases for alps yuanda75_ics
$2.55 New Japan Alps dual 6-pin volume potentiometer a10k b10k 50K 100K
$58.54 Japan ALPS Alps RDC9010006 robot and industrial machinery / communication equipment sensors
$4.14 ALPS RKJXM EL25 Hollow Shaft Encoder Switch with Joystick 8-way Multi Function Switch
$41.04 ALPS 50KAx2 RK168 Series Rotary Potentiometer with Motor Dual-unit Flat-shaft Length:20mm
Find Similar devices | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |