1. Установить SpecDevice
2. Запустить, сформируется спецификация
3. Скопировать ссылку (подробнее...)
Основные характеристики | |
---|---|
Производитель | Digma |
Модель | iDnD7 |
Версия Andriod | 4.0.4; eng.hede.1365586029; SDK15 |
Процессор | 2 cores; ARMv7 Processor rev 0 (v7l); Max: 1209,0 MHz; Min: 302,2 MHz |
Дисплей | 1024 x 600; DPI: 160; Evaluated Size: 7,4" |
Сенсорный экран | Multitouch 5 points |
Графический ускоритель | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.8@905891 |
ОЗУ | 1024 MB (992 MB available) |
Память | 8 GB (7.374 GB actual) (см. вкладку "Память") |
Связь | |
Телефон | GSM, Dual SIM; Net: HSPA |
WiFi | wlan_mt6628; IEEE 802.11 b/g/n; MediaTek MT6628; AP Mode |
USB Host | Yes |
Bluetooth | Bluetooth 3.0+HS, 4.0 |
GPS | Yes |
Установленные компоненты | |
Главная камера | Photo: 1.9 MP; Max: 1600x1200; Focus: infinity; Flash modes: on off torch |
Доп. камера | Photo: 0.3 MP; Max size: 640x480; Focus: infinity; No flash |
Датчики | ADXL345 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; |
bh1620fvc Light Sensor (Capella); range: 0...10240; resolution: 1 (0,01%); power: 0,13mA; | |
Вибратор | Yes |
Языки | 43; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
Аккумулятор | Technology: Li-ion; Voltage: 3917 |
FM radio | Supported by chipset |
Owner's comment: | iDnD7 |
SD Version: | 1.1 5 |
KERNEL: Linux version 3.0.13 (hede@kf-mid) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Wed Apr 10 17:26:47 HKT 2013
CODENAME: REL
Mainboard: yecon77_mg789_tb_ics2
BRAND: alps
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: yecon77_mg789_tb_ics2
DISPLAY: ALPS.ICS2.MP.V1.9
FINGERPRINT: alps/yecon77_mg789_tb_ics2/yecon77_mg789_tb_ics2:4.0.4/IMM76D/1365586029:user/test-keys
HARDWARE: mt8377
ID: IMM76D
TAGS: test-keys
Processor : ARMv7 Processor rev 0 (v7l)
processor : 0
BogoMIPS : 2406.80
processor : 1
BogoMIPS : 2413.36
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc09
CPU revision : 0
Hardware : MT8377
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<7>[41419.931005] (1)[18332:Smack Packet Re] exit
<7>[41419.949948] (1)[18331:Smack Packet Wr] exit
<7>[41419.979173] (1)[19191:dmesg] exit
<7>[41419.979474] (1)[19191:dmesg] sig 17 to [19183:AsyncTask #2]
<7>[41420.001366] (1)[306:WifiStateMachin] fork [19192:WifiStateMachin]
<7>[41420.004584] (0)[19192:WifiStateMachin] set proc[19192] name: ->[loadDriverThrea]
<7>[41420.006033] (1)[19175:Thread-639] exit
<7>[41420.017015] (1)[19180:Thread-641] exit
<6>[41420.032117] (1)[WLAN] rfkill_set_block(blocked 0)
<6>[41420.032129] (1)[WLAN] Power on
<3>[41420.032144] (1)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[41420.032962] (1)[STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[41420.033024] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[41420.034127] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(not defined)
<3>[41420.034906] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO185)
<3>[41420.035642] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(GPIO149)
<3>[41420.036412] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[41420.037148] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO107)
<3>[41420.037930] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(13)
<3>[41420.038710] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO104)
<3>[41420.044138] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(10)
<7>[41420.044323] (0)[255:er.ServerThread] fork [19193:er.ServerThread]
<3>[41420.045225] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<7>[41420.046056] (1)[19193:er.ServerThread] set proc[19193] name: ->[Thread-512]
<3>[41420.048556] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[41420.051557] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[41420.052314] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[41420.053081] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[41420.053829] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[41420.054592] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:FM digital mode is not set, no need for I2S GPIOs
<7>[41420.058172] (1)[19193:Thread-512] exit
<3>[41420.058242] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(GPIO118)
<3>[41420.059027] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(GPIO187)
<3>[41420.059856] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[41420.061091] (1)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<3>[41420.061957] (1)[WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[41420.062778] (1)[WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<6>[41420.257945] (0)[Power/Battery] [upmu_is_chr_det] No charger
<3>[41420.269308] (1)[WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[41420.270099] (1)[WMT-PLAT][I]wmt_plat_i2s_ctrl:[MT662x]warnning:FM digital mode is not set, no I2S GPIO settings should be modified by combo driver
<3>[41420.271732] (1)[WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<3>[41420.272720] (1)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[41420.273826] (1)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<4>[41420.274964] (1)mtk_get_bus_freq() return 166833
<3>[41420.275762] (1)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[41420.276540] (1)Flush type = 4 Rx Queue
<3>[41420.280615] (1)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[41420.281530] (1)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[41420.281549] (1)[STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[41420.282224] (1)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[41420.282955] (1)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<6>[41420.283687] (1)[STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[41420.283699] (1)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[41420.283708] (1)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[41420.283718] (1)[STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[41420.289360] (1)[WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6628)
<3>[41420.295780] (1)[WMT-IC][I]mt6628_ver_check:MT6628: read hw_ver (hw version) (0x8a10)
<3>[41420.302309] (1)[WMT-IC][I]mt6628_ver_check:MT6628: read fw_ver (rom version) (0x8a10)
<3>[41420.303282] (1)[WMT-IC][I]mt6628_find_wmt_ic_info:found ic info(0x8a10) by full match! index:1
<3>[41420.304354] (1)[WMT-IC][I]mt6628_ver_check:MT6628: wmt ic info: MT6628.E2 (0x8a10, WMTHWVER:1, patch_ext:_e2)
<3>[41420.305590] (1)[WMT-CORE][I]wmt_core_hw_check:chip id(0x6628) ver_check ok
<3>[41420.317487] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[41420.318336] (0)[WMT-IC][I]mt6628_sw_init:WMT-CORE: change baudrate(4000000) ok
<3>[41420.321793] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(srh_patch) result(0)
<3>[41420.322582] (0)[WMT-IC][I]mt6628_patch_dwn:valid patch found: (/system/etc/firmware//mt6628_patch_e2_hdr.bin)
<3>[41420.324000] (0)[WMT-IC][I]mt6628_patch_dwn:===========================================
<3>[41420.324995] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Built Time = 20120727130622a
<3>[41420.325963] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[41420.326796] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[41420.327631] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Ph Ver = 0x0010
<3>[41420.328465] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Platform = 1226
<3>[41420.329374] (0)[WMT-IC][I]mt6628_patch_dwn:===========================================
<3>[41420.465560] (1)[WMT-IC][I]mt6628_patch_dwn:wmt_core: patch dwn:0 frag(21, 472) ok
<3>[41420.467073] (1)[WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf14ad50)
<3>[41420.468512] (1)[WMT-IC][I]mt6628_sw_init:init_coex ok
<6>[41420.469663] (1)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[41420.469675] (1)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[41420.469686] (1)[STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[41420.469695] (1)[WMT-IC][I]mt6628_sw_init:enable host STP-UART-FULL mode
<7>[41420.479356] (0)WQ_WARN: cpu:0, proc:kworker/0:1, [thermal_zone_device_check+0x0/0x18]dur: 310030308 > 15ms
<3>[41420.491418] (1)[WMT-IC][I]mt6628_sw_init:co-clock disabled.
<3>[41420.492881] (1)[WMT-IC][I]mt6628_sw_init:set fm mode (2) ok
<3>[41420.493566] (1)[WMT-IC][I]mt6628_sw_init:disable mt662x firmware coredump
<6>[41420.494412] (1)[STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[41420.494425] (1)[STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[41420.494439] (1)mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[41420.495143] (1)board_sdio_ctrl force off before on
<6>[41420.495150] (1)mtk_wcn_cmb_sdio_off (3)
<5>[41420.495272] (1)[Power/clkmgr] [freq_meter] data = 15494, freq = 196 MHz
<5>[41420.496169] (1)[Power/clkmgr] [freq_meter] data = 15494, freq = 196 MHz
<6>[41420.496985] (1)mtk_wcn_cmb_sdio_on (3)
<5>[41420.497098] (1)[Power/clkmgr] [freq_meter] data = 15494, freq = 196 MHz
<3>[41420.497913] (1)msdc3 -> USR Resume <- msdc_pm() : L<1719> PID
<3>[41420.519511] (0)msdc3 -> ================ <- msdc_set_mclk() : L<979> PID
<3>[41420.520576] (0)msdc3 -> !!! Set<400KHz> Source<197000KHz> -> sclk<397KHz> DDR<0> mode<0> div<124> <- msdc_set_mclk() : L<981> PID
<3>[41420.522250] (0)msdc3 -> ================ <- msdc_set_mclk() : L<982> PID
<3>[41420.544895] (0)msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1789> PID
<3>[41420.559698] (0)msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<4117> PID
<3>[41420.560900] (0)msdc3 -> ================ <- msdc_set_mclk() : L<979> PID
<3>[41420.561958] (0)msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<981> PID
<3>[41420.563656] (0)msdc3 -> ================ <- msdc_set_mclk() : L<982> PID
<6>[41420.573838] (0)mmc2: new high speed SDIO card at address 0001
<6>[41420.574989] (0)[WMT-DFT][I]hif_sdio_probe:start!
<6>[41420.575006] (0)[WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x6628) num(0x1)
<6>[41420.575016] (0)[WMT-DFT][I]hif_sdio_probe:card->info[0]: 6628
<6>[41420.575024] (0)[WMT-DFT][I]hif_sdio_probe:card->info[1]: Combo
<6>[41420.575031] (0)[WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[41420.575039] (0)[WMT-DFT][I]hif_sdio_probe:card->info[3]:
<6>[41420.575158] (0)[WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(524288)
<7>[41420.575198] (0)WQ_WARN: cpu:4, proc:kworker/u:4, [mmc_rescan+0x0/0x324]dur: 75020769 > 15ms
<6>[41420.659320] (1)[WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[41420.659507] (0)[2:kthreadd] fork [19194:kthreadd]
<6>[41420.659529] (1)[WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<5>[41420.659572] (1)[wlan] net_device prDev(0xd755d000) allocated
<5>[41420.661673] (1)[wlan] Open FW image: WIFI_RAM_CODE done
<5>[41420.663010] (1)[wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[41420.663920] (1)[wlan] Virtual Address = e9a77000 for COMMON MGMT MEMORY POOL.
<5>[41420.664797] (1)[wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[41420.665504] (1)[wlan] Virtual Address = e9a79000 for SW_RFB_T.
<5>[41420.666217] (1)[wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[41420.666947] (1)[wlan] Virtual Address = e9a7d000 for MSDU_INFO_T.
<6>[41420.667696] (1)[wlan] wlanAdapterStart(): Acquiring LP-OWN
<4>[41420.667961] (1)[RT_MONITOR]WARNNING [19194:ksdioirqd/mmc2] SET NOT ALLOW RT Prio [1] for proc [19194:ksdioirqd/mmc2]
<6>[41420.689600] (1)[wlan] Chip ID: 0x6628
<6>[41420.689616] (1)[wlan] Revision ID: 0x0
<6>[41420.758635] (0)[Power/Battery] [upmu_is_chr_det] No charger
<7>[41420.913059] (1)[18968:FlurryAgent] fork [19195:FlurryAgent]
<7>[41420.925224] (1)[19195:FlurryAgent] set proc[19195] name: ->[AsyncTask #2]
<7>[41420.936145] (1)[19195:AsyncTask #2] fork [19196:AsyncTask #2]
<7>[41420.936211] (1)[19196:AsyncTask #2] set proc[19196] name: ->[RefQueueWorker@]
<6>[41421.259493] (0)[Power/Battery] [upmu_is_chr_det] No charger
<6>[41421.449139] (0)[wlan] wlanAdapterStart(): Waiting for Ready bit..
<6>[41421.459445] (0)[wlan] Ready bit asserted
<5>[41421.499073] (0)[wlan] RF CAL FAIL = (0),BB CAL FAIL = (0)
<5>[41421.500107] (0)[wlan] [wifi] wlan%d netif_carrier_off
<6>[41421.501191] (0)[wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[41421.501248] (0)[wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[41421.502635] (1)[wlan] Domain: map=0, idx=1, code=0x0000
<7>[41421.506909] (0)[2:kthreadd] fork [19197:kthreadd]
<5>[41421.506979] (0)[wlan] tx_thread starts running...
<6>[41421.581303] (0)[WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(6628) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[41421.581318] (0)[WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[41421.581336] (0)[WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 coredump:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[41421.588523] (1)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<3>[41421.589335] (1)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<4>[41421.590327] (1)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<7>[41421.592784] (1)[19192:loadDriverThrea] exit
<6>[41421.608508] (1)[RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[41421.608538] (1)ADDRCONF(NETDEV_UP): wlan0: link is not ready
<5>[41421.620533] (1)init: starting `wpa_supplicant`
<7>[41421.621291] (1)[1:init] fork [19198:init]
<7>[41421.622733] (1)[306:WifiStateMachin] fork [19199:WifiStateMachin]
<7>[41421.622790] (1)[19199:WifiStateMachin] set proc[19199] name: ->[WifiMonitor]
<7>[41421.624393] (1)[19198:init] set proc[19198] name: ->[logwrapper]
<7>[41421.627281] (1)[19198:logwrapper] fork [19200:logwrapper]
<7>[41421.632039] (1)[19200:logwrapper] set proc[19200] name: ->[wpa_supplicant]
<6>[41421.760257] (0)[Power/Battery] [upmu_is_chr_det] No charger
<7>[41421.789359] (0)WQ_WARN: cpu:0, proc:kworker/0:1, [thermal_zone_device_check+0x0/0x18]dur: 310010615 > 15ms
<5>[41421.840023] (1)[wlan] N=0 closed
<5>[41421.840481] (1)[wlan] EVENT-ROAMING ABORT: Current Time = 40503770
<5>[41421.841241] (1)[wlan] [13] TRANSITION: [0] -> [0]
<6>[41421.843287] (1)[wlan] NAF=0,0,0
<6>[41421.843304] (1)[wlan] NAF=0,0,0
<5>[41422.020596] (0)[wlan] [13] TRANSITION: [0] -> [2]
<7>[41422.025284] (1)[19177:com.specdevice] exit
<5>[41422.068916] (0)[Power/Alarm] alarm_timer_triggered type 2 at 54696.896018323 (1)
<5>[41422.070615] (1)[Power/Alarm] alarm 2 set 54702.718000000
<5>[41422.079507] (1)[Power/Alarm] alarm wait (0x0)
<6>[41422.260980] (0)[Power/Battery] [upmu_is_chr_det] No charger
<5>[41422.287260] (1)[wlan] CMD set_band=0
<5>[41422.298070] (1)[wlan] [13] TRANSITION: [2] -> [0]
<6>[41422.301171] (1)[wlan] NAF=0,0,0
<5>[41422.302248] (1)[wlan] N=0 closed
<5>[41422.302659] (1)[wlan] EVENT-ROAMING ABORT: Current Time = 40504230
<5>[41422.303426] (1)[wlan] [13] TRANSITION: [0] -> [0]
<5>[41422.304008] (1)[wlan] [13] TRANSITION: [0] -> [1]
<5>[41422.304597] (1)[wlan] [13] TRANSITION: [1] -> [6]
<5>[41422.305177] (1)[wlan] ChReq net=0 token=1 b=1 c=4 s=1
<6>[41422.310132] (0)[wlan] NAF=0,0,0
<5>[41422.311160] (0)[wlan] ChGrant net=0 token=1 ch=4 sco=1
<5>[41422.311854] (0)[wlan] [13] TRANSITION: [6] -> [7]
<5>[41422.312460] (0)[wlan] STA 40mAllowed=1
<6>[41422.313307] (0)[wlan] Wait Cmd TxSeqNum:1
<6>[41422.317066] (0)[wlan] EVENT_ID_TX_DONE PacketSeq:1 ucStatus: 0 SN: 26
<6>[41422.321107] (0)[wlan] Wait Cmd TxSeqNum:2
<6>[41422.323111] (0)[wlan] EVENT_ID_TX_DONE PacketSeq:2 ucStatus: 0 SN: 27
<6>[41422.325109] (0)[wlan] QM: (fgIsWmmSupported=1, fgSupportQoS=1)
<6>[41422.325127] (0)[wlan] QM: (fgIsWmmSupported=1, fgIsQoS=1)
<6>[41422.325138] (0)[wlan] MQM: Assoc_Rsp Parsing (QoS Enabled=1)
<5>[41422.325161] (0)[wlan] N=0 b=1 c=4 s=1 e=0 h=1 I=0x05 l=1 p=1
<5>[41422.325858] (0)[wlan]
<4>[41422.326147] (0)f8:1a:67:97:62:14 [17] TRANSITION: [0] -> [3]
<4>[41422.326152] (0)
<5>[41422.328408] (0)[wlan] [wifi] wlan0 netif_carrier_on [ssid:IN f8:1a:67:97:62:14]
<5>[41422.330562] (0)[wlan] EVENT-ROAMING START: Current Time = 40504260
<5>[41422.331332] (0)[wlan] [27] TRANSITION: [0] -> [1]
<5>[41422.331911] (0)[wlan] [13] TRANSITION: [7] -> [10]
<6>[41422.333163] (0)ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<5>[41422.336507] (0)[wlan] R1X len=113
<5>[41422.337491] (0)[wlan] QM: +STA[0]
<5>[41422.340335] (0)[wlan] T1X len=135
<5>[41422.345156] (0)[wlan] R1X len=169
<5>[41422.346045] (0)[wlan] T1X len=113
<7>[41422.361925] (0)[306:WifiStateMachin] fork [19201:WifiStateMachin]
<7>[41422.361986] (0)[19201:WifiStateMachin] set proc[19201] name: ->[DhcpStateMachin]
<6>[41422.396016] (0)[wlan] eNetTypeIndex:0, ePwrMode:0, fgEnCmdEvent:1
<5>[41422.396065] (0)[wlan] Set Wi-Fi PS mode to CAM (0)
<5>[41422.398314] (0)[wlan] N=0 b=1 c=4 s=1 e=0 h=1 I=0x05 l=1 p=1
<5>[41422.399658] (0)init: starting `dhcpcd_wlan0`
<7>[41422.400385] (0)[1:init] fork [19202:init]
<7>[41422.402029] (0)[19202:init] set proc[19202] name: ->[logwrapper]
<7>[41422.404409] (0)[19202:logwrapper] fork [19203:logwrapper]
<7>[41422.405250] (0)[19203:logwrapper] set proc[19203] name: ->[dhcpcd]
<7>[41422.418245] (0)[19203:dhcpcd] fork [19204:dhcpcd]
<7>[41422.418297] (0)[19204:dhcpcd] set proc[19204] name: ->[dhcpcd-run-hook]
<7>[41422.422982] (0)[19204:dhcpcd-run-hook] fork [19205:dhcpcd-run-hook]
<7>[41422.424245] (1)[19205:dhcpcd-run-hook] set proc[19205] name: ->[ls]
<7>[41422.427000] (1)[19205:ls] exit
<7>[41422.427179] (1)[19205:ls] sig 17 to [19204:dhcpcd-run-hook]
<7>[41422.428064] (0)[19204:dhcpcd-run-hook] fork [19206:dhcpcd-run-hook]
<7>[41422.429817] (0)[19206:dhcpcd-run-hook] set proc[19206] name: ->[ls]
<7>[41422.432836] (0)[19206:ls] exit
<7>[41422.433012] (0)[19206:ls] sig 17 to [19204:dhcpcd-run-hook]
<7>[41422.434188] (0)[19204:dhcpcd-run-hook] fork [19207:dhcpcd-run-hook]
<7>[41422.435064] (0)[19207:dhcpcd-run-hook] set proc[19207] name: ->[ls]
<7>[41422.437795] (0)[19207:ls] exit
<7>[41422.437986] (0)[19207:ls] sig 17 to [19204:dhcpcd-run-hook]
<7>[41422.438784] (0)[19204:dhcpcd-run-hook] fork [19208:dhcpcd-run-hook]
<7>[41422.439841] (0)[19208:dhcpcd-run-hook] set proc[19208] name: ->[setprop]
<7>[41422.442890] (0)[19208:setprop] exit
<7>[41422.443061] (0)[19208:setprop] sig 17 to [19204:dhcpcd-run-hook]
<7>[41422.444046] (0)[19204:dhcpcd-run-hook] fork [19209:dhcpcd-run-hook]
<7>[41422.445211] (0)[19209:dhcpcd-run-hook] set proc[19209] name: ->[ls]
<7>[41422.447915] (0)[19209:ls] exit
<7>[41422.448076] (0)[19209:ls] sig 17 to [19204:dhcpcd-run-hook]
<7>[41422.448377] (0)[19204:dhcpcd-run-hook] exit
<7>[41422.448506] (0)[19204:dhcpcd-run-hook] sig 17 to [19203:dhcpcd]
<7>[41422.471431] (1)[14666:m.UCMobile.intl] fork [19210:m.UCMobile.intl]
<7>[41422.472209] (0)[19210:m.UCMobile.intl] set proc[19210] name: ->[Thread-588]
<7>[41422.479083] (0)[19210:Thread-588] exit
<7>[41422.492312] (1)[19152:ReferenceQueueD] exit
<7>[41422.492417] (0)[19154:FinalizerDaemon] exit
<7>[41422.492779] (0)[19156:FinalizerWatchd] exit
<5>[41422.500634] (0)[wlan] N=0 b=1 c=4 s=1 e=0 h=1 I=0x05 l=1 p=1
<7>[41422.511693] (0)[103:zygote] fork [19211:zygote]
<7>[41422.512688] (0)[103:zygote] fork [19212:zygote]
<7>[41422.512902] (0)[19212:zygote] set proc[19212] name: ->[ReferenceQueueD]
<7>[41422.513479] (0)[103:zygote] fork [19213:zygote]
<7>[41422.513919] (1)[19213:zygote] set proc[19213] name: ->[FinalizerDaemon]
<7>[41422.514518] (0)[103:zygote] fork [19214:zygote]
<7>[41422.514795] (1)[19211:zygote] fork [19215:zygote]
<7>[41422.517283] (0)[19215:zygote] set proc[19215] name: ->[GC]
<7>[41422.518153] (1)[19214:zygote] set proc[19214] name: ->[FinalizerWatchd]
<7>[41422.524783] (0)[19211:zygote] fork [19216:zygote]
<7>[41422.533264] (0)[19216:zygote] set proc[19216] name: ->[Signal Catcher]
<7>[41422.533916] (0)[19211:zygote] fork [19217:zygote]
<7>[41422.533961] (1)[19217:zygote] set proc[19217] name: ->[Compiler]
<7>[41422.534661] (0)[19211:zygote] fork [19218:zygote]
<7>[41422.539497] (1)[19218:zygote] set proc[19218] name: ->[ReferenceQueueD]
<7>[41422.540223] (0)[19211:zygote] fork [19219:zygote]
<7>[41422.540625] (0)[19219:zygote] set proc[19219] name: ->[FinalizerDaemon]
<7>[41422.542561] (0)[19211:zygote] fork [19220:zygote]
<7>[41422.545138] (0)[19220:zygote] set proc[19220] name: ->[FinalizerWatchd]
<7>[41422.546197] (0)[19211:zygote] set proc[19211] name: ->[iatek.GoogleOta]
<7>[41422.556639] (0)[19211:iatek.GoogleOta] fork [19221:iatek.GoogleOta]
<7>[41422.563359] (0)[19211:iatek.GoogleOta] set proc[19211] name: ->[re-initialized>]
<7>[41422.569767] (0)[19221:iatek.GoogleOta] set proc[19221] name: ->[Binder Thread #]
<6>[41422.580706] (0)[RTlog insert] fib_inetaddr_event() wlan0 NETDEV_UP!
<6>[41422.580931] (0)<< [RTlog delete] inet_rtm_delroute !
<6>[41422.580943] (0)[RTlog info] inet_rtm_delroute cfg.fc_dst =0001a8c0
<6>[41422.580951] (0)[RTlog info] inet_rtm_delroute cfg.fc_gw =00000000 >>
<6>[41422.581357] (0)<< [RTlog insert] inet_rtm_newroute !
<6>[41422.581372] (0)[RTlog info] inet_rtm_newroute cfg.fc_dst =0001a8c0
<6>[41422.581379] (0)[RTlog info] inet_rtm_newroute cfg.fc_gw =00000000 >>
<6>[41422.581759] (0)<< [RTlog insert] inet_rtm_newroute !
<6>[41422.581773] (0)[RTlog info] inet_rtm_newroute cfg.fc_dst =00000000
<6>[41422.581781] (0)[RTlog info] inet_rtm_newroute cfg.fc_gw =0101a8c0 >>
<7>[41422.587427] (0)[19221:Binder Thread #] fork [19223:Binder Thread #]
<7>[41422.589628] (1)[19222:dhcpcd] set proc[19222] name: ->[dhcpcd-run-hook]
<7>[41422.589670] (0)[19203:dhcpcd] fork [19222:dhcpcd-run-hook]
<7>[41422.597475] (1)[19222:dhcpcd-run-hook] fork [19224:dhcpcd-run-hook]
<7>[41422.597671] (1)[19223:Binder Thread #] set proc[19223] name: ->[Binder Thread #]
<7>[41422.602453] (1)[19224:dhcpcd-run-hook] set proc[19224] name: ->[ls]
<7>[41422.612961] (0)[18887:intiMonitror] exit
<7>[41422.613946] (0)[19211:re-initialized>] set proc[19211] name: ->[iatek.GoogleOta]
<7>[41422.616153] (0)[19224:ls] exit
<7>[41422.623187] (0)[19224:ls] sig 17 to [19222:dhcpcd-run-hook]
<7>[41422.623863] (0)[19222:dhcpcd-run-hook] fork [19225:dhcpcd-run-hook]
<7>[41422.624839] (1)[19225:dhcpcd-run-hook] set proc[19225] name: ->[ls]
<7>[41422.627869] (1)[19225:ls] exit
<7>[41422.628062] (1)[19225:ls] sig 17 to [19222:dhcpcd-run-hook]
<7>[41422.629670] (0)[19222:dhcpcd-run-hook] fork [19226:dhcpcd-run-hook]
<7>[41422.630665] (1)[19226:dhcpcd-run-hook] set proc[19226] name: ->[setprop]
<7>[41422.633977] (1)[19226:setprop] exit
<7>[41422.634162] (1)[19226:setprop] sig 17 to [19222:dhcpcd-run-hook]
<7>[41422.634720] (0)[19222:dhcpcd-run-hook] fork [19227:dhcpcd-run-hook]
<7>[41422.635635] (1)[19227:dhcpcd-run-hook] set proc[19227] name: ->[setprop]
<7>[41422.638887] (1)[19227:setprop] exit
<7>[41422.639050] (1)[19227:setprop] sig 17 to [19222:dhcpcd-run-hook]
<7>[41422.639683] (1)[19222:dhcpcd-run-hook] fork [19228:dhcpcd-run-hook]
<7>[41422.639887] (0)[395:Binder Thread #] sig 9 to [18904:android.musicfx]
<7>[41422.639984] (1)[18906:GC] exit
<7>[41422.640061] (1)[18911:ReferenceQueueD] exit
<7>[41422.640829] (0)[18904:android.musicfx] exit
<7>[41422.640901] (0)[18913:FinalizerWatchd] exit
<7>[41422.640977] (1)[19228:dhcpcd-run-hook] set proc[19228] name: ->[setprop]
<7>[41422.641584] (0)[18915:Binder Thread #] exit
<7>[41422.642942] (0)[18914:Binder Thread #] exit
<7>[41422.643066] (0)[18912:FinalizerDaemon] exit
<7>[41422.646826] (0)[19228:setprop] exit
<7>[41422.647005] (0)[19228:setprop] sig 17 to [19222:dhcpcd-run-hook]
<7>[41422.647568] (0)[19222:dhcpcd-run-hook] fork [19229:dhcpcd-run-hook]
<7>[41422.648519] (0)[19229:dhcpcd-run-hook] set proc[19229] name: ->[setprop]
<7>[41422.649923] (1)[18910:Compiler] exit
<7>[41422.650021] (1)[18909:Signal Catcher] exit
<7>[41422.652884] (0)[19229:setprop] exit
<7>[41422.653064] (0)[19229:setprop] sig 17 to [19222:dhcpcd-run-hook]
<7>[41422.653668] (0)[19222:dhcpcd-run-hook] fork [19230:dhcpcd-run-hook]
<7>[41422.656672] (0)[19230:dhcpcd-run-hook] set proc[19230] name: ->[setprop]
<7>[41422.663281] (0)[19230:setprop] exit
<7>[41422.663445] (0)[19230:setprop] sig 17 to [19222:dhcpcd-run-hook]
<7>[41422.664031] (0)[19222:dhcpcd-run-hook] fork [19231:dhcpcd-run-hook]
<7>[41422.664410] (0)[19212:ReferenceQueueD] exit
<7>[41422.664520] (1)[19213:FinalizerDaemon] exit
<7>[41422.664729] (1)[19214:FinalizerWatchd] exit
<4>[41422.668176] (0)[MDPK W]: MT6577_MDP_Flush(): FLUSH() by different process. owner:0, current = ( process, pid, tgid ) = ( Signal Catcher, 18909, 18904 ) Rsc=0x00000000
<7>[41422.671094] (0)[18909:Signal Catcher] sig 17 to [103:zygote]
<7>[41422.674160] (1)[19231:dhcpcd-run-hook] set proc[19231] name: ->[setprop]
<7>[41422.678368] (1)[19231:setprop] exit
<7>[41422.678541] (1)[19231:setprop] sig 17 to [19222:dhcpcd-run-hook]
<7>[41422.679446] (0)[19222:dhcpcd-run-hook] fork [19233:dhcpcd-run-hook]
<4>[41422.679893] (0)[MDPK W]: MT6577_MDP_Flush(): FLUSH() by different process. owner:0, current = ( process, pid, tgid ) = ( zygote, 103, 103 ) Rsc=0x00000000
<7>[41422.681497] (1)[19233:dhcpcd-run-hook] set proc[19233] name: ->[setprop]
<4>[41422.681663] (0)[103:zygote] fork fail retval:0xfffffdff
<4>[41422.682312] (0)[103:zygote] fork fail:[0xfffffdff, -513]
<7>[41422.685964] (1)[19233:setprop] exit
<7>[41422.686111] (1)[19233:setprop] sig 17 to [19222:dhcpcd-run-hook]
<7>[41422.686757] (1)[19222:dhcpcd-run-hook] fork [19234:dhcpcd-run-hook]
<7>[41422.689881] (1)[19234:dhcpcd-run-hook] set proc[19234] name: ->[ls]
<7>[41422.694135] (0)[103:zygote] fork [19235:zygote]
<7>[41422.694893] (1)[19234:ls] exit
<7>[41422.695119] (1)[19234:ls] sig 17 to [19222:dhcpcd-run-hook]
<7>[41422.695168] (0)[103:zygote] fork [19236:zygote]
<7>[41422.695921] (1)[19222:dhcpcd-run-hook] fork [19237:dhcpcd-run-hook]
<7>[41422.696074] (0)[19236:zygote] set proc[19236] name: ->[ReferenceQueueD]
<7>[41422.696546] (0)[19235:zygote] fork [19238:zygote]
<7>[41422.696965] (0)[103:zygote] fork [19239:zygote]
<7>[41422.697044] (1)[19237:dhcpcd-run-hook] set proc[19237] name: ->[setprop]
<7>[41422.697233] (0)[19239:zygote] set proc[19239] name: ->[FinalizerDaemon]
<7>[41422.697791] (0)[103:zygote] fork [19240:zygote]
<7>[41422.697994] (0)[19240:zygote] set proc[19240] name: ->[FinalizerWatchd]
<7>[41422.700376] (1)[19238:zygote] set proc[19238] name: ->[GC]
<7>[41422.701165] (1)[19235:zygote] fork [19241:zygote]
<7>[41422.701215] (1)[19241:zygote] set proc[19241] name: ->[Signal Catcher]
<7>[41422.701485] (0)[497:Binder Thread #] fork [19242:Binder Thread #]
<7>[41422.701677] (1)[19235:zygote] fork [19243:zygote]
<7>[41422.702064] (0)[19243:zygote] set proc[19243] name: ->[Compiler]
<7>[41422.702144] (1)[19237:setprop] exit
<7>[41422.702327] (1)[19237:setprop] sig 17 to [19222:dhcpcd-run-hook]
<7>[41422.702819] (0)[19235:zygote] fork [19244:zygote]
<7>[41422.703146] (1)[19222:dhcpcd-run-hook] fork [19245:dhcpcd-run-hook]
<7>[41422.703328] (1)[19242:Binder Thread #] set proc[19242] name: ->[executeAppTrans]
<7>[41422.703654] (0)[19244:zygote] set proc[19244] name: ->[ReferenceQueueD]
<7>[41422.704177] (0)[19235:zygote] fork [19246:zygote]
<7>[41422.704367] (0)[19246:zygote] set proc[19246] name: ->[FinalizerDaemon]
<7>[41422.704442] (1)[19245:dhcpcd-run-hook] set proc[19245] name: ->[setprop]
<7>[41422.704886] (0)[19235:zygote] fork [19247:zygote]
<7>[41422.705063] (0)[19247:zygote] set proc[19247] name: ->[FinalizerWatchd]
<7>[41422.706582] (0)[19235:zygote] set proc[19235] name: ->[d.apps.uploader]
<7>[41422.707896] (1)[19245:setprop] exit
<7>[41422.708087] (1)[19245:setprop] sig 17 to [19222:dhcpcd-run-hook]
<7>[41422.708713] (1)[19222:dhcpcd-run-hook] fork [19248:dhcpcd-run-hook]
<7>[41422.709857] (1)[19248:dhcpcd-run-hook] set proc[19248] name: ->[setprop]
<7>[41422.710080] (0)[19242:executeAppTrans] exit
<7>[41422.712447] (0)[19235:d.apps.uploader] fork [19249:d.apps.uploader]
<7>[41422.713236] (1)[19248:setprop] exit
<7>[41422.713419] (1)[19248:setprop] sig 17 to [19222:dhcpcd-run-hook]
<7>[41422.713643] (0)[19235:d.apps.uploader] set proc[19235] name: ->[re-initialized>]
<7>[41422.714027] (1)[19222:dhcpcd-run-hook] fork [19250:dhcpcd-run-hook]
<7>[41422.715113] (1)[19250:dhcpcd-run-hook] set proc[19250] name: ->[setprop]
<7>[41422.718482] (1)[19250:setprop] exit
<7>[41422.718658] (1)[19250:setprop] sig 17 to [19222:dhcpcd-run-hook]
<7>[41422.719255] (1)[19222:dhcpcd-run-hook] fork [19251:dhcpcd-run-hook]
<7>[41422.719909] (0)[19249:d.apps.uploader] set proc[19249] name: ->[Binder Thread #]
<7>[41422.720412] (1)[19251:dhcpcd-run-hook] set proc[19251] name: ->[setprop]
<7>[41422.723733] (1)[19251:setprop] exit
<7>[41422.723926] (1)[19251:setprop] sig 17 to [19222:dhcpcd-run-hook]
<7>[41422.724552] (1)[19222:dhcpcd-run-hook] fork [19252:dhcpcd-run-hook]
<7>[41422.726969] (0)[19252:dhcpcd-run-hook] set proc[19252] name: ->[setprop]
<5>[41422.730649] (1)[Power/clkmgr]
<7>[41422.730821] (0)[19252:setprop] exit
<4>[41422.731029] (1)[mm_power_prepare]: enable mmsys clksrc for clock 174
<7>[41422.731044] (0)[19252:setprop] sig 17 to [19222:dhcpcd-run-hook]
<5>[41422.731822] (1)[Power/clkmgr] [mm_power_prepare]: set MM way_en
<7>[41422.732351] (0)[19222:dhcpcd-run-hook] fork [19253:dhcpcd-run-hook]
<7>[41422.733221] (1)[19183:AsyncTask #2] fork [19254:AsyncTask #2]
<7>[41422.733906] (0)[19253:dhcpcd-run-hook] set proc[19253] name: ->[setprop]
<4>[41422.734053] (1)[MDPK W]: MT6577_MDP_Flush(): FLUSH() by different process. owner:0, current = ( process, pid, tgid ) = ( AsyncTask #2, 19254, 19254 ) Rsc=0x00000000
<7>[41422.737875] (0)[19249:Binder Thread #] fork [19255:Binder Thread #]
<7>[41422.737941] (1)[19255:Binder Thread #] set proc[19255] name: ->[Binder Thread #]
<7>[41422.739599] (0)[19163:Binder Thread #] fork [19256:Binder Thread #]
<7>[41422.740064] (0)[19253:setprop] exit
<7>[41422.740234] (0)[19253:setprop] sig 17 to [19222:dhcpcd-run-hook]
<7>[41422.740993] (0)[19222:dhcpcd-run-hook] fork [19257:dhcpcd-run-hook]
<7>[41422.742177] (0)[19257:dhcpcd-run-hook] set proc[19257] name: ->[ls]
<7>[41422.745887] (0)[19257:ls] exit
<7>[41422.746116] (0)[19257:ls] sig 17 to [19222:dhcpcd-run-hook]
<7>[41422.746731] (0)[19222:dhcpcd-run-hook] exit
<7>[41422.746921] (0)[19222:dhcpcd-run-hook] sig 17 to [19203:dhcpcd]
<7>[41422.748589] (1)[19256:Binder Thread #] set proc[19256] name: ->[Binder Thread #]
<7>[41422.752659] (1)[19254:AsyncTask #2] set proc[19254] name: ->[dmesg]
<7>[41422.753934] (0)[19235:re-initialized>] set proc[19235] name: ->[d.apps.uploader]
# begin build properties
# autogenerated by buildinfo.sh
sys.project.fat.path=/dev/block/mmcblk0p6
sys.project.fat.volume=iDnD7
persist.sys.timezone=Europe/Moscow
ro.build.id=IMM76D
ro.build.display.id=ALPS.ICS2.MP.V1.9
ro.build.version.incremental=eng.hede.1365586029
ro.custom.build.version=1365586029
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=Wed Apr 10 17:29:05 HKT 2013
ro.build.date.utc=1365586145
ro.build.type=user
ro.custom.speaker.on=yes
ro.build.user=hede
ro.build.host=kf-mid
ro.build.tags=test-keys
ro.product.model=iDnD7
ro.product.brand=alps
ro.product.name=yecon77_mg789_tb_ics2
ro.product.device=yecon77_mg789_tb_ics2
ro.product.board=yecon77_mg789_tb_ics2
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Digma
ro.product.locale.language=ru
ro.product.locale.region=RU
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=yecon77_mg789_tb_ics2
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=yecon77_mg789_tb_ics2-user 4.0.4 IMM76D eng.hede.1365586029 test-keys
ro.build.fingerprint=alps/yecon77_mg789_tb_ics2/yecon77_mg789_tb_ics2:4.0.4/IMM76D/1365586029:user/test-keys
ro.build.flavor=
ro.build.characteristics=tablet
ro.product.hdmiSupport=yes
ro.custom.flash=no
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=ALPS.ICS2.MP.V1.9
ro.mediatek.platform=MT6577
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.ICS2.MP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
#
mediatek.wlan.channelselect=1
ro.sf.lcd_density=160
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=128m
# Encrypt phone function
ro.crypto.tmpfs_options=mode=0771,uid=1000,gid=1000
ro.crypto.fs_type=ext4
ro.crypto.fs_real_blkdev=/emmc@usrdata
ro.crypto.fs_mnt_point=/data
ro.crypto.fs_options=noauto_da_alloc
ro.crypto.fs_flags=0x00000406
# audio
ro.camera.sound.forced=0
ro.audio.silent=0
#ipo
sys.ipo.tbl=1
# USB Config Type
ro.sys.usb.storage.type=mtp,mass_storage
# USB MTP WHQL
ro.sys.usb.mtp.whql.enable=0
# Power off opt in IPO
sys.ipo.pwrdncap=2
#
# ADDITIONAL_BUILD_PROPERTIES
#
fmradio.driver.chip=3
ro.sf.hwrotation=270
ril.current.share_modem=2
launcherplus.allappsgrid=2d
launcher2.allappsgrid=3d_20
curlockscreen=2
ro.mediatek.gemini_support=true
persist.radio.fd.counter=20
persist.radio.fd.off.counter=20
drm.service.enabled=true
fmradio.driver.enable=1
mediatek.wlan.chip=MT6628
mediatek.wlan.module.postfix=_mt6628
dalvik.vm.mtk-stack-trace-file=/data/anr/mtk_traces.txt
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.config.ringtone=Backroad.ogg
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
wlan_mt6628 276914 0 - Live 0xbf1fb000 (P)
cfg80211 121952 0 - Live 0xbf1d2000
mtk_fm_priv 2399 0 - Live 0xbf1ce000 (P)
mtk_fm_drv 98537 1 mtk_fm_priv, Live 0xbf1ae000
mtk_stp_bt 39986 0 - Live 0xbf1a1000
mtk_stp_gps 37294 0 - Live 0xbf194000
mtk_stp_uart 21589 1 - Live 0xbf18b000 (P)
mtk_stp_wmt 373644 8 wlan_mt6628,mtk_fm_priv,mtk_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf121000 (P)
mtk_hif_sdio 18482 2 wlan_mt6628,mtk_stp_wmt, Live 0xbf118000
devinfo 840 0 - Live 0xbf114000 (P)
devapc 4553 0 - Live 0xbf10f000 (P)
sec 90381 0 - Live 0xbf0f2000 (P)
vcodec_kernel_driver 42938 2 - Live 0xbf0e2000 (P)
m4u 113423 20 - Live 0xbf0bd000 (P)
ccmni 17150 0 - Live 0xbf0b4000 (P)
ccci 117408 15 ccmni, Live 0xbf08c000 (P)
ccci_plat 127174 2 ccmni,ccci, Live 0xbf063000 (P)
mtk_drvb_77 6081 0 - Live 0xbf05e000 (P)
mtklfb 23566 0 - Live 0xbf054000
pvrsrvkm 233143 99 mtklfb, Live 0xbf00d000
mtk_hwe 1386 0 - Live 0xbf009000 (P)
aed 16384 3 - Live 0xbf000000 (P)
RAM: 1024 MB (992 MB available)
System RAM: 992.000MB
mtkfb.0: 10.000MB
Flash: 8 GB (7.374 GB actual)
mmcblk0: 7.374 GB
Новый аккумулятор для Digma iDnD7
$23.39 Black Tablet touch for Digma Eve 10.2 3G ES1002EG touch screen digitizer glass replacement repair panel
$16 6 Inch Eink Screen ED060XC3 For Digma S683g Ebook Reader Display Replacement Parts
$31.5 6" E-Ink 758x1024 212 PPi Screen ED060XCD For Digma M2 Ebook Reader Display Replacement Parts
$8.17 Touch Screen For 10.1'' Digma Optima 10 Z802 4G TS1229PL Tablet PC Z-802 Panel Digitizer XHSNM1010301W V0 Glass Touch
$32.42 350W 36V 15A Scooter Controller Motherboard Bluetooth with Tuya Smart for 8.5inch Scooter FOSTON X-Play DIGMA Max Speed 30 Km/h
$13.63 6" 1024*758 Eink lcd Without touch screen light For Digma e629 E-book Ebook Reader LCD Display Replacement
$14.1 6" ED060XC3 For Digma r658 ONYX BOOX C67SM Bering 2 E-book Ebook Reader LCD Display Replacement (screen no touch+no light)
$225.5 350W 36V 15A FOSTON X-Play DIGMA Scooter Controller Matherboard Bluetooth with Tuya Smart for 8.5 inch Scooter Max Speed 30 Km/h
$259.16 40Km/h 350W 36V 17A Scooter Controller For 10 Inch Smart Bluetooth Hoverboard Max Foston X-Play Digma Scooter Accesories
$39.84 350W 36V 15A FOSTON X-Play DIGMA Scooter Controller Motherboard Bluetooth with Tuya APP for 8.5inch Scooter Max Speed 30 Km/h
$13 6inch 800*600 E-BOOK LCD for Digma E628 DISPLAY SCREEN free shipping
$6.03 7 Inch touch screen For Digma CITI Kids CS7216MG Tablet PC capacitive touch screen digitizer sensor glass panel CS7216MG
$62.62 ENS060XCD 6 inch ink screen For digma x1 with touch with light bar
$14.1 6" 1024*758 Eink lcd Without touch screen light For Digma e629 E-book Ebook Reader LCD Display Replacement
$15.04 6"1024*768 Eink LCD Display Screen for Digma e632 Reader Repair Replacement
$8.07 2PCS 1PCS 9.7 inch touch screen QSD E-C97015-01 for Digma iDsQ10 iDsQ 10 3G iDrQ10 Tablet PC Digitizer Replacement
$177.15 350W 36V 17A Original Tuya APP MAX FOSTON X-Play DIGMA Scooter Controller Bluetooth Hoverboard for 10 Inch Max Speed 40Km/h
$7.51 New Touch Screen for 10.1"DIGMA Plane 1538E 4G PS1150ML Tablet Touch Panel Digitizer Glass Sensor DIGMA Plane 1538E 4G PS1150ML
$7 Black 10.1 Inch For DIGMA Optima 1315T 4G TT1108ML Tablet Digitizer Touch Screen Glass Sensor Free Shipping
$15.98 6 inches 800x600 For Digma E600 E-book reader Ink Screen Display
Чехлы для Digma iDnD7
$16 6 Inch Eink Screen ED060XC3 For Digma S683g Ebook Reader Display Replacement Parts
$13.63 6" 1024*758 Eink lcd Without touch screen light For Digma e629 E-book Ebook Reader LCD Display Replacement
$31.5 6" E-Ink 758x1024 212 PPi Screen ED060XCD For Digma M2 Ebook Reader Display Replacement Parts
$14.1 6" ED060XC3 For Digma r658 ONYX BOOX C67SM Bering 2 E-book Ebook Reader LCD Display Replacement (screen no touch+no light)
$8.17 Touch Screen For 10.1'' Digma Optima 10 Z802 4G TS1229PL Tablet PC Z-802 Panel Digitizer XHSNM1010301W V0 Glass Touch
$23.39 Black Tablet touch for Digma Eve 10.2 3G ES1002EG touch screen digitizer glass replacement repair panel
$32.42 350W 36V 15A Scooter Controller Motherboard Bluetooth with Tuya Smart for 8.5inch Scooter FOSTON X-Play DIGMA Max Speed 30 Km/h
$225.5 350W 36V 15A FOSTON X-Play DIGMA Scooter Controller Matherboard Bluetooth with Tuya Smart for 8.5 inch Scooter Max Speed 30 Km/h
$259.16 40Km/h 350W 36V 17A Scooter Controller For 10 Inch Smart Bluetooth Hoverboard Max Foston X-Play Digma Scooter Accesories
$39.84 350W 36V 15A FOSTON X-Play DIGMA Scooter Controller Motherboard Bluetooth with Tuya APP for 8.5inch Scooter Max Speed 30 Km/h
$13 6inch 800*600 E-BOOK LCD for Digma E628 DISPLAY SCREEN free shipping
$6.03 7 Inch touch screen For Digma CITI Kids CS7216MG Tablet PC capacitive touch screen digitizer sensor glass panel CS7216MG
$15.04 6"1024*768 Eink LCD Display Screen for Digma e632 Reader Repair Replacement
$14.1 6" 1024*758 Eink lcd Without touch screen light For Digma e629 E-book Ebook Reader LCD Display Replacement
$8.07 2PCS 1PCS 9.7 inch touch screen QSD E-C97015-01 for Digma iDsQ10 iDsQ 10 3G iDrQ10 Tablet PC Digitizer Replacement
$177.15 350W 36V 17A Original Tuya APP MAX FOSTON X-Play DIGMA Scooter Controller Bluetooth Hoverboard for 10 Inch Max Speed 40Km/h
$7.51 New Touch Screen for 10.1"DIGMA Plane 1538E 4G PS1150ML Tablet Touch Panel Digitizer Glass Sensor DIGMA Plane 1538E 4G PS1150ML
$15.98 6 inches 800x600 For Digma E600 E-book reader Ink Screen Display
$62.62 ENS060XCD 6 inch ink screen For digma x1 with touch with light bar
$7 Black 10.1 Inch For DIGMA Optima 1315T 4G TT1108ML Tablet Digitizer Touch Screen Glass Sensor Free Shipping
Найти похожие устройства | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |